FOOD & BEVERAGE TECHNOLOGY CATALOGUE 2016 EDITION

tech

no

log

yte

chn

olo

gy

tech

no

log

y

FOOD&BEVERAGE

cAtAlOGuE

food&beverage companies providing equipment, products and services to the food and beverage industry

tEchnOlOGy

2016 edition

editrice Zeus sas - via p. ballerini 66, 20831 - seregno (mb) - italy tel. +39 0362 244182 - 0362 244186 - www.editricezeus.com

www.itfoodonline.comCATALOGO2016-COVER_F+R.indd 1 10/03/16 15:52

IBIE è il più grande e più completo evento dell’emisfero occidentale dedicato alla panificazione. È un’occasione imperdibile per scoprire le ultime tendenze e innovazioni, incontrare e prendere contatto con i colleghi di tutto il mondo e imparare dai professionisti di successo del settore della panificazione. Il salone è organizzato solo una volta ogni tre anni, non perdere l’opportunità di partecipare già quest’anno! Mettilo in agenda, dall’8 all’11 ottobre 2016, e unisciti ai leader di settore a Las Vegas.

IBIE è orgoglioso di partecipare all’International Buyer Program della Camera di Commercio USA

REGISTRATI OGGI STESSO ONLINE: WWW.IBIE2016.COM

IL T

UO M

ONDO

, UN UNIVERSO DI OPPORTUNITÀ

it reaches:40.000+ food and beverage producers

20.000+ oeMs and technology suppliers

24 exhibitions worldwide

12 chaMbers of coMMerce worldwide

150.000+ last edition certified readingsDISTRIBUTED

WORLDWIDE

OFFICIAL MEDIA PARTNER OF:

technologyTHE MOST IMPORTANT CATALOGUE AbOUT

technology, machines, packaging and automation

2016 ExHIbITIONS

for the food&beverage industry

the 10 languages web portal

since1981

PAGINA PRESENTAZIONE_INGLESE.indd 1 21/10/16 10:40

technology technology

contents

editorial managementand registered office:Via Ballerini, 66 20831 SEREGNO (MB) - ITALYTel. +39 0362 244182

+39 0362 244186web site: www.editricezeus.come-mail: [email protected]: www.itfoodonline.come-mail: [email protected]: editricezeus

Machineries, plants and equipment for food and beverage industry year II - CATALOGUE 2016

managing editorEnrico [email protected]

FO

OD

&B

EVER

AG

E T

ECH

NO

LOG

Y C

ATA

LOG

UE

2016

edi

tion

cataloGUE 2016 EDITION

Alba & Teknoservice Srl • Am Technology Srl • Esmach Spa • Lawer Spa • Tecnopool Spa • TpS Srl • Tubini Forni • Zmatik pastry Machines

confectionery

preserving

Asc Automatic System Control • Bertuzzi Food processing Srl • Chiaravalli Group Spa Socio Unico • Crsi - Centro Ricerche Sviluppo Impianti S.A. • FBF Italia Srl • Gea Niro Soavi - Mechanical Equipment Italia Spa • Icf & Welko Spa • Industrie De Nora Spa • MFT Srl • Navatta Group Food processing Srl • pieralisi Spa • pigo Srl • pND Srl • pompe Cucchi • Tecninox di A. Namaziano Srl • Zanotti Spa

packaging

Altech Srl • Amd Electronic Srl • Bbm packaging • Beumer Maschinenfabrik Gmbh & Co. Kg • Bizerba Spa • Bondani Srl • Eurosicma Spa • Fiorini International Spa • General System pack Srl - Gsp • I.M.A. Industria Macchine Automatiche Spa • Ifp packaging Srl • Linpac packaging Srl • Leybold Italia Srl • Makro Labelling Srl • Microline Srl • Ocme Srl • pfm Spa • Tecno pack Spa • Tmg Impianti Spa • Zambelli Srl

automation

Aventics Srl • Contrinex Italia Srl • Evo Services Srl • Igus Srl • Mini Motor Srl • pamoco S.p.A. • Rotronic Italia Srl • Telmotor Spa

energy

C&G Depurazione Industriale Srl • Ivar Industry Srl • Spk power Generation Srl

1-43

44-75

76-91

92-107

108-113

1a rist

ampa

SOMMARIO_CAT2016_1ristampa.indd 4 02/12/16 12:32

technology CATALOGO 2016fooD&Beverage tecHnoLogy

Machineries, plants and equipment for food and beverage industry year II - CATALOGUE 2016

managing editorEnrico [email protected]

editorial manager S.V. [email protected]

editorial production Sonia [email protected]

account dep. managerElena [email protected]

project and layout design creative dep. ZEUS [email protected]

translations Leomilla TranslationMuller Worldwide Links Srl

printing Faenza Industrie Grafiche

FOOD&BEVERAGE TECHNOLOGYcontents

HanDLing

Cidiesse Engineering Srl • M.H. Material Handling Spa • penta Srl • proxaut Srl

114-121

Dairy tecHnoLogies

Cad project Srl • Sordi Impianti Srl

122-125

Orved SpaHoreca

126-127

4G Ghidini Srl • Akomag Srl • Bolondi Ivano off. Mecc. • Framax Srl • Smi Spa - Smi Group • TS Italia Srl • Velo Acciai Srl

BottLing128-141

SpS IpC Drives italia

services - eXHiBitions142-143

SOMMARIO_CAT2016_1ristampa.indd 5 02/12/16 12:32

4

fo

oD

&B

ever

ag

e te

cHn

oLo

gy

ca

taLo

gU

e20

16 e

ditio

n

www.itfoodonline.com

PacKaging fooD&Beverage tecHnoLogy

t ecno Pack is synonymous with technology, skill and service in the primary and secondary � ow and pillow pack packaging industry.

A market leader company, Tecno Pack o� ers solutions that are always speci� c and designed for every � eld of applica-tion, with special focus on the food sector.Tecno Pack provides the packaging technology that your company requires: from the small manual loading elec-tronic � ow pack packaging machine to the complete sys-tem that removes products from the production line, stores them in single or multiple packs and then transports them to be palletised. A sales team of highly skilled technicians, a knowledgeable and � exible technical department, in-house production of all mechanical parts, careful selection of trade materials, top class production team and timely after-sales services, which is present worldwide, enable Tecno Pack to o� er its customers machines and systems that are designed as “tailor-made clothing” and recognised as the ultimate ex-pression of current technological innovation by companies

as Barilla, Nestlé, Pavesi, Kraft, Baxter, Chipita, PepsiCo and many others. High-speed, � exibility, modi� ed atmosphere, product shelf life and global packaging integration in the company system are some of the issues that Tecno Pack tackles daily with enthusiasm and determination and which, together with its customers, provide it with new evolution-ary impetus.Tecno Pack is totally con� dent in being able to conceive its “tailor made clothing” also for your product and is commit-ted from the outset in designing it, using the same care with which it is manufactured.Tecno Pack’s goal is to achieve only technological excel-lence, conforming it to the requirements and developments of your company and therefore gain, over the years, your total satisfaction.Tecno Pack’s o� er is to work with you, so it can be decisive in the success of your company.

www.tecnopackspa.it

PRIMARy AnD SeconDARy FloW AnD PIlloW PAcK PAcKAgIng InDUStRy

T ecno Pack è sinonimo di tecnologia, esperienza e servizio nel settore del confezionamento fl ow pack e pillow pack, primario e secondario.

Azienda leader di mercato, Tecno Pack si presenta con so-luzioni sempre specifi che e dedicate ad ogni settore appli-cativo, ma sempre con una particolare dedizione verso il food. Tecno Pack fornisce tutta la tecnologia di confezio-namento che serve alla tua azienda. Dalla piccola mac-china confezionatrice fl ow pack elettronica a caricamen-to manuale, fi no all’impianto completo che preleva dalla produzione il prodotto e lo preserva in confezioni singole o multiple poi trasportate fi no alla paletizzazione.Una squadra commerciale di tecnici specializzati, un uf-fi cio tecnico potente ed elastico, la produzione interna di tutti i particolari meccanici, la rigorosa selezione dei ma-teriali da commercio, un team produttivo di assoluta ec-cellenza e un servizio post vendita puntuale e presente in tutto il mondo, consentono a Tecno Pack di proporre alla sua utenza macchine e impianti sempre progettati come “vestiti su misura” e riconosciuti come massima espressio-

ne dell’attuale innovazione tecnologica da aziende come Gruppo Barilla, Nestlé, Pavesi, Kraft, Baxter, Chipita, Pep-siCo e molti altri. Alta velocità, fl essibilità, atmosfera mo-difi cata, shelf life del prodotto, integrazione globale del packaging nel sistema azienda, sono alcune delle temati-che che tutti i giorni Tecno Pack affronta con entusiasmo e determinazione e che, insieme ai suoi clienti, le forniscono nuova linfa evolutiva.In Tecno Pack sono assolutamente certi di poter concepi-re un loro “abito su misura” anche per il tuo prodotto e si impegnano fi n d’ora a vestirlo usando la stessa cura con la quale viene realizzato. L’obiettivo di Tecno Pack è quello di realizzare solo l’eccellenza tecnologica conformando-la alle esigenze ed evoluzioni della tua azienda ed avere quindi, negli anni, il tuo pieno consenso.

La proposta Tecno Pack è quella di collaborare con te per po-ter essere determinante al successo della tua società.

www.tecnopackspa.it

CONFEZIONAMENTO FLOW PACK E PILLOW PACK, PRIMARIO E SECONDARIO

TECNO PACK - CAT 2016 packaging.indd 1 19/01/16 13:26

6

fo

oD

&B

ever

ag

e te

cHn

oLo

gy

ca

taLo

gU

e20

16 e

ditio

n



B izerba Italy was established in Trento in 1928, and then moved to Milan where it operated until the end of 1982. The year after that, we opened our sales and technical ser-

vices facility in the refurbished, expanded site of Desio, where we now employ 190 people - 60% technical sta� and 40% in the sales-administration area. Certi� ed: ISO 9001:2008 - TÜV SUD Quality assurance system certi� cate - Baden Württemberg regio-nal organisation - Metrology O� ce. Our innovative technology can be integrated into any production line ensuring our recogni-tion by major retailers and industry operators as a reliable partner that delivers solutions for the widest range of process problems. We are backed by a retail sales structure that covers four areas:• Northwest: for the regions of Lombardy, Piedmont, Liguria and

the Aosta Valley• Northeast: for the regions of Veneto, Trentino Alto Adige, Friuli,

Emilia, Marche and Abruzzo• Centre: for the regions of Tuscany, Lazio, Umbria and Sardinia• South: for the regions of Campania, Molise, Apulia, Basilicata, Ca-

labria and Sicily

We bene� t from the speci� c skills of two separate Divisions:• The Retail Division is responsible for organised distribution of

weigh systems, meat processing machines and wrap-labelling sy-stems, developing and manufacturing state-of-the-art products.

• The Industry Division covers weighing and labelling systems for the industrial sector (food, chemical, mechanical, logistics): pre-cision scales, bases and platforms, electronic weighing terminals with dedicated programmes for counting and dosing, which can be integrated with IT management systems; we also have checkweighers, automatic and manual pricing machines, inspec-tion systems with metal detectors, X-rays and display systems.

Lastly, at Bizerba Italia we have a Global Software Development Team to design and engineer integrated management systems and customised applications. Our sales sta� is supported by the Service Division formed of experts that can assist customers in all types of operations. In 2008, Flexongraf was acquired for Italian production of paper and labels. Bizerba has plenty of dealers lo-cated throughout Italy and they handle sales as well as being the go-to facilities for after-sales service.

SOLUTIONS FOR THE WIDEST RANGE OF PROCESS PROBLEMS

B izerba Italia viene fondata a Trento nel 1928 e successi-vamente si trasferisce a Milano dove opera fi no al 1982 . Dall’anno seguente svolge attività commerciale ed assisten-

za tecnica nella rinnovata ed ampliata sede di Desio con un totale attuale di 190 dipendenti di cui 60% staff tecnico e 40 % Staff com-merciale-amministrativo. Certi� cata: ISO 9001:2008 - TÜV SUD Attestazione del Sistema di Garanzia della Qualità - Ente Regionale Baden Württemberg - Direzione Metrica. Grazie ad una tecnologia innovativa e integrabile in qualunque linea della produzione , Bi-zerba è riconosciuta dagli operatori della Grande Distribuzione e dell’Industria come un partner affi dabile nella risoluzione delle più svariate problematiche di processo.Supportata da un’effi ciente struttura commerciale diretta che co-pre quattro aree:• Nord Ovest - per le regioni Lombardia, Piemonte, Liguria, Valle

d’Aosta• Nord Est - per le regioni Veneto, Trentino Alto Adige, Friuli, Emilia

Marche, Abruzzo• Centro - per le regioni Toscana , Lazio, Umbria, Sardegna• Sud - per le regioni Campania, Molise, Puglia, Basilicata, Calabria,

Sicilia

Si avvale della specifi ca competenza di due distinte Divisioni :• La Divisione Retail segue tutta la distribuzione organizzata per

quanto attiene i sistemi di pesatura, le macchine lavorazioni car-ne e la carta-etichette, sviluppando e producendo prodotti all’a-vanguardia.

• La Divisione Industria si occupa dei sistemi di pesatura ed etichet-tatura per il settore industriale (alimentare, chimico, meccanico, logistico): bilance di precisione, basamenti e piattaforme, termi-nali di pesatura elettronici con programmi specifi ci per conteggio e dosaggio integrabili a sistemi informativi gestionali ed ancora selezionatrici ponderali, prezzatrici automatiche e manuali, siste-mi di ispezione Metal Detector X RAY e sistemi di visione.

Attraverso il suo Global Team di Sviluppo Software , infi ne, Bizerba Italia progetta e realizza sistemi di gestione integrati ed applicazio-ni customizzate. Lo staff commerciale è affi ancato dalla Divisione Service costituita da esperti in grado di assistere i clienti in tutte le tipologie di interventi. Nel 2008 è stata acquisita la Società Flexon-graf per la produzione italiana di Carta ed Etichette. Bizerba è presente in modo capillare su tutto il territorio nazionale anche grazie alla fi tta Rete di Concessionari, che oltre alla vendita , costituiscono un valido supporto per l’assistenza tecnica.

RISOLUZIONE DELLE PIÙ SVARIATE PROBLEMATICHE DI PROCESSO

BIZERBA - CAT 2016.indd 1 10/12/15 16:33

www.bizerba.com

Gamma Industria:Massime prestazionie ampia gamma dimodelli ed esecuzioni.

GARANZIA ASSOLUTAI sistemi di controllo qualità e le più avanzate

tecnologie di ispezione Bizerba assicurano la qualità dei vostri alimenti

Vision SystemInspection

8

fo

oD

&B

ever

ag

e te

cHn

oLo

gy

ca

taLo

gU

e20

16 e

ditio

n



Z ambelli Packaging Machinery was founded in 1969 as a company to manufacture packaging equip-

ment. Based in the mechanical deep-rooted tradition of the city of Bologna in a few years the success of the technological solutions adopted has crossed the Italian borders and created a customer base of international renown. Zambelli today range of machines is composed by shrink-wrappers, tray-packers, cartoners, case packers also equipped with ro-botic pick & place. Suppliers are challenged by end-user for more � exible, e� cient and less energy demanding equipment. Zambelli took up eagerly such challenge since its machine design was developed to measure up to such expectations.

The challenge has driven Zambelli to widen its portfolio of solutions by introducing on its well reputed range of shrink-wrapping and tray-packer machines robotic pick and place systems to handle unstable and/or irregular shaped containers, as well as to get a smooth operation for any products.

Some examples are the plastic cups for yogurt, jelly or des-sert, or even the cups for warm soup wrapped with insu-lating thermal cardboard sleeve or the glass bulb shaped jars for spices or candles or any other products. But not only containers for food or beverages also objects such as special caps with straw shaped as the cartoons characters to be inserted among the containers inside the packs as a gadget for kids. This actually is a project for which Zambelli has recently developed and supplied a machine for a US based customer who was looking for an automatic solution to handle the yogurt jars (standard container) and the caps (special objects, all di� erent). Zambelli was able to equip one of its shrink-wrapping machine with a robot with a spe-cial picking tool that from a conveyor belt running parallel to the shrinkwrapper is capable of picking the caps and � t one cap in a bundle of 6 before the � lm wrapping, all ori-ented and at a speed of 500bpm.

Other cases of robotic pick and place are bulb shaped glass jars with spice product for which Zambelli has re-cently supplied the second line to a multinational com-pany leader of the market. For handling these containers it must be avoided bu� ering and backpressure and it is necessary to adopt pick and place devices that based on picking directly the product are able to sort the con-tainer without the negative e� ect of the mass � ow. With our robotic system the containers can be easily grouped in the pattern required and packed in plastic tray or tray

with � lm or wrap-around. Once the ro-botic system has completed the grouping cycles the pattern obtained can be then wrapped with heat-shrink � lm to protect it and ensure its integrity. The � nal bun-

dle will result in a robust and economic package as the Zambelli technology o� ered by its series of shrink wrap-ping machines allows to reduce the costs of the package using thinner � lm. The � exibility o� ered by the robotic pick and place is perfectly combined with the Zambelli well known e� ciency-seeking approach with its LFT se-ries of Tray-Packers/Shrink-wrappers and WR wraparound case-packers starting from the engineering of the frame, featuring a cantilever design that allows the operator to-tal control of and accessibility to all areas of the machine. The frame is also designed so that all the parts that need lubrication are gathered in the back side. This hygienic de-sign maintains separation between lubricated parts and parts in contact with the products.

Other bene� ts o� ered by the Zambelli approach and avail-able on all range of equipment are the following: reduced change over time, “user friendly” operation, reduced foot-print, reduced maintenance costs, higher production ef-� ciency, better quality and attention to the aesthetic of the packs. These advantages have been obtained through up-to-date technological solutions to operate and con-trol the machine and thanks to the Zambelli design with less moving parts hence less wear and adjustments, an extensive � eld testing and the standardization of func-tional groups on several machine models to extend to the all the equipment the bene� ts listed above. On the shrink-wrappers Zambelli’s research has also tackled energy consumption for � lm shrinking and aesthetic improvement of the shrink pack. Zambelli unique energy saving heating tunnel design has obtained perfectly shaped packs with-out wrinkles by a tunnel of minimal length hence reducing thermal waste and machine footprint .

Zambelli “user friendly” technology with less moving parts in the machine has a dramatic impact on reducing time needed for installation and commissioning, training customer’s personnel and carry out scheduled mainte-nance. All together these features reduce the machine’s total cost of ownership that is the ultimate customer’s goal.With thousands of machines installed Zambelli is active worldwide through its network of sale agents, pre-sents in the USA with Zambelli USA LLC and in UK with Zambelli LTD.

www.zambelli.it

ZAMBellI, FleXIBIlIty FoR the FooD AnD BeVeRAge InDUStRy

ZAMBELLI-CAT 2016_tecnInter.indd 1 29/01/16 15:05

TECHNICAL DATA:

Control logic: PLC Siemens / Allen Bradley

Carton blank: pre-glued

Sealing type: hot melt / adhesive tape

Speed: up to 12 case/min depending on product type

Carton magazine: high capacity with easy loading

Compressed air: 15Nmc/h @ 5÷6 bar

Installed power: 14 Kw

C

A

B

A150 400

B120 350

C230 600

MIN MAX

SIDE LOADING

EQUIPMENTS AND COMPONENTS:

PLC: Omron / Siemens / Allen Bradley

Motorgearboxes: Bonfiglioli / SEW

Pneumatics: Festo

Inverters: Danfoss

Servocontrols: Omron / Control Tecnique

Servomotors: Omron / Lafert

Hot Melt: Melton / Nordson / Preo

www.zambelli.it

shrinkwrappers

case packers

robot loaded

Via Ferrara 35-41, 40018 San Pietro in Casale, Bologna, Italy- Tel. +39 051.66.617.82

INGOMBRO ADV.indd 3 28/01/16 11:24

10

fo

oD

&B

ever

ag

e te

cHn

oLo

gy

ca

taLo

gU

e20

16 e

ditio

n



F ounded in 1965, according to a study conducted by the Politec-nico Insitute of Milan, comparing

rankings of pro� tability, liquidity and � -nancial stability of the main companies active in the food packaging sector, Eu-rosicma results to be among the top 5 most competitive Italian companies. This study has been published on the 16th Feb 2015 on the “Il Sole 24 Ore”, an Italian national daily newspaper owned by Con� ndustria, the Italian employers’ Federation.Eurosicma’s machinery portfolio includes moving, feed-ing and horizontal packaging machines and turn-key so-lutions for the confectionery, bakery and care industries.

Eurosicma is present in over than 85 countries worldwide with more than 4000 machines installed. From the begin-ning, Eurosicma is able to grant full support during all the production phases: from the designing, manufacturing, quality control and throughout the after-sales assistance. To be as closest as possible to the customers, Eurosicma invests a lot in the after sales service, creating dedicated Local Technical Centres in Italy, Turkey, North and South America, India, Philippines, Indonesia and Middle East with skilled technicians periodically trained at Eurosicma Head O� ce.

The Candy Division is dedicated to the � ow wrapper solu-tions for small confectionery items such as candies, jellies, lollipops, chewing gums, bubble gums, chewy-candies, to� ees and many other more. The � ow wrapper EURO 77 is available in a wide range of con� gurations and able to handle and pack all kinds of candies, pectin and gelatin jellies, laminated and coated gums, extruded products.

The Lines Division is entirely dedicated to the wrapping solutions and integrated packaging lines for bakery and chocolate products, such as any kinds of biscuits, wafers, cakes, rusks and rice cakes, bars, moulded chocolate and many more. The � ow wrapper EURO 88 is Eurosicma’s proposal for wrapping a wide range of confectionery and bakery prod-ucts in a variety of con� gurations.

Flow pack solutions are available for any kind of biscuits –dry, enrobed, sandwich- in stacks, on edge or single piece. Speci� cally for sandwich biscuits Eurosicma can supply also the Sandwiching machine that can be directly con-nected to the � ow wrapper. According to the production needs, the sandwiching machine is available with two lanes to produce 1200/1500 sandwich biscuits/min and

with four lanes to produce 2600/2800 bis-cuits/min. For biscuits on edge a fully elec-tronic fold wrapper is available in the port-folio, able to reach a mechanical speed up to 100 packs/min. For biscuits, small cakes, irregular and sticky products, enrobed, cereal and thin bars a patented high-per-

formance and pressure-less Feeding and Timing System composed of 8 belts independently servo driven. This ap-plication is able to grant a gentle handling of products at an extremely low and monitored pressure. If required or needed, it can also avoid any contact between the prod-ucts. Special feeding system for wafers have been spe-ci� cally designed to reach high-speed requirements and satisfy di� erent pack sizes.

Noodle cakes � ow wrapping systems equipped with Sa-chets Feeding and Cutting Units are included in the port-folio and widely developed and supplied in the last 10 years. Extreme � exibility in pack con� gurations allows to have single cake pack, 1 pile of 2 cakes, 2 piles of 2 cakes, family pack composed of 3 piles of 2 cakes.

Customized rows distribution and aligning systems for products coming in � at position both in rows and ran-domly can be supplied. Bu� ering systems, stacking sys-tems and automatic portion feeders complete the o� er in the handling and feeding systems. Many optionals can be added to the standard applications such as Carton Feed-ers Applications, Tear tape, Gusseting, Strip packs, Gus Flush.

Multipack overwrapping with single � ow pack placed in stacks or on edge it is also available. Latest developments for a fully automated multipack wrapping system include the feeding system MPF (MultiPack Feeder). It is a fully au-tomated feeding system that can be combined with the � ow wrapper EURO 88 for primary wrapping. Such system is able to orientate the � ow packs, grouping them in the desired quantity and � nally, by means of a 2 axis driven Pick & Place system, transfer the created portions directly on the secondary � ow wrapper’s feeding chain.

The third product-focused Care Division develops form-ing and packaging machines for plasters and cotton swabs in a wide range of shapes and sizes. Fully automat-ed forming and packaging lines for cream coated gauzes are included in the o� er serving the pharmaceutical in-dustry.

www.eurosicma.it

eURoSIcMA: 50 yeARS oF PAcKAgIng AnD conStAnt InnoVAtIon

EUROSICMA-CAT 2016_tecnInter.indd 1 18/01/16 10:46

12

FO

OD

&B

EVER

AG

E TE

CHN

OLO

GY

CA

TALO

GU

E20

16 e

ditio

n


packaging FOOD&BEVERagE TEcHnOLOgY

D ryvac dry screw pumps, energy savers and maintein-ance reducers: the new line of Dryvac pumps in the 650 m3/h and 450 m3/h models allow to reduce the consump-

tions up to 5kW and in some cases to substitute the primary pump + roots pump group with only one pump. The energy saving features are possible thanks to the final vacuum level of the Dryvac pump which can reach a vacuum level even better (0,005 mbar) than the couple traditional pump + accelerator (vacuum level in the field 0,01 mbar measured at the pump flange).

An innovative experience on the thermoforming machine For a traditional installation in some thermoforming machines it is fore-seen the installation of a pump with a 600 m3 /h pumping speed in a technical cabinet outside of the production line. To reach the technical cabinet the solution includes a 3 inches thick and 70 mt long piping. In-side the packaging machine it would be installed an accelerator pump of 1500m3\h pumping speed. It has been proposed to exchange the 2 pumps system (600m3/h + 1500 m3/h accelerator) with only one Dryvac DV650, eliminating for each machine: • the oil sealed pump of

630m3/h pumping speed in the technical cabinet • the 3 inches 70mt long piping • the roots accelerator of 1500m3/h.

This solution allows the customer to disconnect the 1500m3 roots pump saving on the initial investment, on the energy consump-tion and the maintenance, using only a primary pump which can be installed directly underneath the packaging machine thanks to its dimensions. The machine cycle has decreased passing from 13 to 8 seconds. The noise inside the white chamber decreases plus the dry pump DV 650 is ISO 6 certified. Our customers who have tried this solution have taken into consideration the installations after the first one so that it will be possible to save on: 1) The roots pump with a pumping speed of 1500 m3\h value € 7.000,00.2) The construction and installation of a 3 inches diameter and 70 mt

long piping value € 6.000,00.3) Handling costs are much lower than an oil sealed pump.4) High increase of production with the new solution.5) Using the Dryvac pump also increases significantly the food safety

due since there is no chance to contaminate the food with oil.

Forget About the pumps, DeDicAte your time only to the process

L e pompe a secco a vite Dryvac, ottimizzano i consumi e ridu-cono le manutenzioni: la nuova linea di pompe Dryvac, nei ta-gli di portata 650 m3/h e 450 m3/h, permette di ridurre i consu-

mi fino a 5kW ed in alcuni casi sostituire un gruppo costituito da pompa primaria e pompa roots, sostituendo il gruppo con un’unica pompa. Tali prestazioni e risparmio energetico sono possibili grazie al vuoto finale della sola pompa Dryvac, che può raggiungere un vuoto di 0,005 mbar, risutato migliore persino di quanto si possa ottenere dall’accoppiamen-to di una pompa rotativa a palette tradizionale, con un acceleratore a lobi (vuoto nel campo 0,01 mbar misurati sulla flangia della pompa).

Un’esperienza innovativa sulla macchina termoformatricePer l’installazione di alcune macchine termo-formatrici si sarebbe previ-sta l’installazione di una pompa tradizionale, di portata 600 m3/h in un vano tecnico fuori dall’ambiente di produzione. Per raggiungere il vano tecnico, la soluzione tradizionale prevedeva una tubazione da 3 pollici lunga 70 metri. All’interno della confezionatrice sarebbe stata installata una pompa acceleratore a lobi da 1500m3\h. È stato proposto di sosti-tuire il sistema di due pompe (Primaria a palette 600m3/h + Accelerato-re a lobi 1500 m3/h), con una sola pompa Dryvac DV650, eliminando così per ogni macchina:

• la pompa a bagno d’olio da 630m3/h nel vano tecnico;• la tubazione da 3 pollici lunga 70 metri;• la pompa acceleratore roots da 1500m3/h.

Questa soluzione ha permesso al cliente di scollegare la pompa acce-leratore roots da 1500m3 risparmiando, oltre alla spesa iniziale per la stessa, il consumo energetico e la manutenzione successivi, utilizzando una sola pompa primaria, che grazie alle ridotte dimensioni, è instal-labile direttamente sotto la confezionatrice. Il ciclo della macchina è diminuito, passando da 13 secondi a 8 secondi. Il rumore all’interno della camera bianca è diminuito, inoltre la pompa a secco DV 650 è cer-tificata ISO 6. Il cliente applicando questa innovativa soluzione potrà risparmiare:1) Una pompa roots da 1500 m3\h dal valore di € 7.000,00.2) La costruzione e l’installazione di una tubazione da 3 pollici in acciaio

inox lunga 70 metri, il cui costo è € 6.000,00.3) Costi di gestione molto inferiori rispetto alla pompa a bagno d’olio.4) Maggiore sicurezza nei processi alimentari, in quanto non esiste la

possibilità di contaminazione del prodotto da parte dell’olio. Contestualmente a questi vantaggi, si è potuto avere un quantificabile aumento della produttività della macchina stessa.

DIMENTICARSI DELLE POMPE, PER DEDICARSI AL PROCESSO

OERLIKON - CAT 2016 packaging.indd 1 30/03/16 15:18

©B

ICO

M_1

3155

.06

0.02

.201

5

La tecnologia del vuoto è diventata un elemento fondamentale per molte attività del settore della trasformazione e del confezionamento degli alimenti. Affidatevi alle soluzioni per il vuoto di Oerlikon Leybold Vacuum, troverete il prodotto adeguato per ogni vostro tipo di esigenza, dalle pompe per il vuoto a bagno d’olio a secco con tecnologia a vite, centrali da vuoto e sistemi complessi con un ventaglio di prodotti unico. I nostri prodotti vi convinceranno grazie alla propria soli-dità, ad un design compatto e ad un processo di controllo combinato con emissioni di rumore minime e costi di gestione contenuti. Informazioni dettagliate sono disponibili su: http://www.leybold-foodandpack.com.

Performance e affidabilità!

Oerlikon Leybold Vacuum GmbHBonner Strasse 498D-50968 KölnT +49 (0)221 347-0F +49 (0)221 [email protected]/leyboldvacuum

Tecnologia Innovativa del Vuoto per il Food and Packaging

Oerlikon Leybold Vacuum Italia S.r.l.Via Trasimeno 820128 MilanoT +39 02 2722 31F +39 02 2720 [email protected]

Anz_FoodPack_Verpackung_Lemon_IT_2014.indd 1 27.03.15 16:46

14

FO

OD

&B

EVER

AG

E TE

CHN

OLO

GY

CA

TALO

GU

E20

16 e

ditio

n



General System Pack is a consolidated and in-ternationally renowned company which pro-duces different types of packaging machines.

Technology is unquestionably its strength, together with the high quality standard of its machines.

General System Pack packaging lines are all electron-ically managed, extremely solid, enduring and easy to manage. They adopt solutions that comply with the most demanding ergonomic shapes and saniti-zation.

General System Pack offers a vast selection of models which guarantee excellent solutions for every stage of the flow pack packaging, including automated feeding and line ending.

General System Pack gives every product its tailored suite; the company provides a vast range of solutions including controlled atmosphere, high speed and highly automated lines, always guaranteeing the best possible outcome. General System Pack is unmatched.

General System Pack packaging machines treat the prod-uct with the same care that the customer uses during the production phase. The packaging lines that General Sys-tem Pack proposes are best suited for middle and small companies that want to give and industrial slant to their products.General System Pack is a versatile and solid partner, which contributes significantly to the success of their clients.

www.gsp.it

General SyStem Pack, aUtOmatIc PackaGInG lIneS

G eneral System Pack è un’azienda di consolidata fama internazionale e produce differenti tipologie di macchine confezionatrici.

La tecnologia è indiscutibilmente il suo maggior punto di forza, oltre all’elevatissimo standard qualitativo delle pro-prie macchine.

Le linee di confezionamento prodotte da General System Pack sono tutte a gestione elettronica, estremamente ro-buste, longeve e semplici da gestire, realizzate adottando soluzioni mirate a risolvere le più severe richieste di ergo-nomicità e sanitizzazione. La vasta gamma dei modelli che General System Pack pro-pone, offre risposte sempre eccellenti per tutti i settori del packaging in flow pack, comprese le alimentazioni auto-matiche ed il fine linea. Qualsiasi tipo di prodotto con General System Pack trova il giusto “vestito su misura”; le molteplici soluzioni proposte

dall’azienda, spaziano dall’atmosfera controllata all’alta velocità, fino all’automatismo più esasperato, garantendo sempre il massimo ottenibile.

General System Pack non teme confronti. Le confezionatrici e gli impianti General System Pack trat-tano sempre il prodotto del cliente con la stessa cura ed attenzione impiegate dal cliente stesso nel proprio proces-so produttivo. Le linee di confezionamento proposte sono la migliore soluzione per le aziende medie e piccole che si apprestano a fornire un packaging di taglio industriale al proprio prodotto. General System Pack si candida ad essere un partner au-tenticamente solido e versatile, in grado di contribuire in modo sostanziale al successo della propria utenza.

www.gsp.it

GENERAL SYSTEM PACK, LINEE AUTOMATICHE DI CONFEZIONAMENTO

GSP - CAT 2016 packaging.indd 1 04/03/16 10:12

16

FO

OD

&B

EVER

AG

E TE

CHN

OLO

GY

CA

TALO

GU

E20

16 e

ditio

n



E stablished in 1961, IMA is world leader in the design and manufacture of automatic machines for the processing and packaging of

pharmaceuticals, cosmetics, food, tea and coffee.

Its position of leadership is the result of significant investments in R&D, regular and constructive dialogue with the end-users in its sectors and the Group’s ability to expand internationally, conquering new markets.

Its history features a constant growth that has enabled the Group to close the year 2015 with consolidated revenues of over one billion euros (1,109.5 million euros), an increase of 29.8% over the previous year. Exports accounted for about 90%.

The Group, whose Chairman is Alberto Vacchi, has more than 5,000 employees, more than 2,600 of whom overseas, and is present in about 80 countries, supported by a sales network made up of 29 branches

(Italy, France, Switzerland, the United Kingdom, Germany, Austria, Spain, Poland, Israel, Russia, the United States, India, China, Malaysia, Thailand and Brazil), representative offices in central-eastern Europe and more than 50 agencies.

The Group has 38 production plants in Italy, Germany, France, Switzerland, Spain, the UK, the USA, India, Malaysia and China.

IMA S.p.A. has been listed on the Milan Stock Exchange since 1995 and in 2001 joined the STAR segment.

The IMA Group owns more than 1,400 patents and patent applications in the world; over 500 designers are committed to product innovation. IMA has launched many new machine models over the last years.

For further information, please visit our website: www.ima.it

IMA: InnovAtIon, AwArEnEss, AbIlIty

F ondata nel 1961, IMA è leader mondiale nella progettazione e produzione di macchine automatiche per il processo e il confezionamento

di prodotti farmaceutici, cosmetici, alimentari, tè e caffè.

Una leadership acquisita grazie a investimenti significativi nella ricerca e sviluppo, a un dialogo costante e costruttivo con gli end-user dei settori di riferimento, alla capacità del Gruppo di internazionalizzarsi e conquistare nuovi mercati. La sua storia è infatti caratterizzata da una crescita costante. Il Gruppo ha chiuso l’esercizio 2015 con ricavi consolidati superiori al miliardo, pari a 1.109,5 milioni di euro (+29,8% rispetto al 2014) e una quota export pari a circa il 90%.

Il Gruppo presieduto da Alberto Vacchi conta oltre 5.000 dipendenti, di cui oltre 2.600 all’estero, ed è presente in circa 80 paesi, sostenuto da una rete commerciale composta di 29 filiali con servizi di vendita e assistenza in

Italia, Francia, Svizzera, Regno Unito, Germania, Austria, Spagna, Polonia, Israele, Russia, Stati Uniti, India, Cina, Malesia, Thailandia e Brasile, uffici di rappresentanza in Europa centro-orientale e più di 50 agenzie.

Il Gruppo si avvale di 38 stabilimenti di produzione tra Italia, Germania, Francia, Svizzera, Spagna, Regno Unito, Stati Uniti, India, Malesia e Cina.

IMA S.p.A. è quotata alla Borsa di Milano dal 1995 ed è entrata nel segmento STAR nel 2001.

Il Gruppo IMA è titolare di oltre 1.400 tra brevetti e domande di brevetto attivi nel mondo, conta oltre 500 progettisti impegnati nell’innovazione di prodotto e ha lanciato numerosi nuovi modelli di macchine negli ultimi anni.

Per ulteriori informazioni, visitate il sito: www.ima.it

IMA: InnovAtIon, AwAreness, AbIlIty

IMA - CAT 2016 packaging_1RISTAMPA.indd 1 21/10/16 12:35

www.ima.it

More than custom made. More than well made.

More than hand made. More than home made.

MADE IN IMA

ME

DIA

MO

RP

HO

SIS

.it

- P

h.

Fab

io M

anto

van

i

18

FO

OD

&B

EVER

ag

E TE

cHn

OLO

gY

ca

TaLO

gU

E20

16 e

ditio

n



B ondani srl - Packing Systems, was founded in 1994 by its sole director, Bruno Bondani. His experien-ce and technical expertise, acquired in decades

of manufacturing of machines for the agro-food sector, combining with his son Alessio, general manager of the Company, have enabled to hit remarkable targets in terms of food handling and and-of-line process.

High quality combining with absolute project customi-zation and competitive prices, have made Bondani s.r.l. a sound partner for producers of the food industries.

Its presence in domestic marketplace evidences hoe a small sized family-run company, can outstandingly com-pete with bigger realities without ever compromise af-ter-sales-service and the quality of products.

Reliability of the projects, realization of new solutions in order to optimize e� ciency and cheapness according o quality standard, are the principles who support new ideas or customer enquiries.

www.bondani.it

BONDANI, MACHINES FOR THE AGRO-FOOD SECTOR

b ondani srl-Packing Systems, è stata fondata nel 1994 dall’attuale amministratore unico, Bruno Bondani. La sua esperienza e competenza tecnica,

acquisita in decenni di attività nel comparto della costru-zione di macchine per l’industria agroalimentare, unita a quella del fi glio, Alessio, direttore generale dell’azienda, hanno permesso di raggiungere nuovi traguardi nel set-tore della movimentazione e del fi ne linea degli alimenti.

L’elevata qualità, legata alla massima personalizzazio-ne dei progetti il tutto unito a prezzi competitivi, fanno di Bondani un valido partner per le industrie produttive nell’industria alimentare.

La presenza sul mercato nazionale, testimonia come un’a-zienda familiare, di piccole dimensioni, può egregiamente competere con realtà più strutturate, senza mai mettere in secondo piano l’assistenza post-vendita e la qualità dei prodotti.

Flessibilità nella progettazione, elaborazione di nuove soluzioni tese ad ottimizzare il rapporto effi cienza ed eco-nomicità, all’interno di rigidi standard qualitativi, sono i criteri che sostengono ogni nuova idea o richiesta del cliente.

www.bondani.it

bonDAnI, MACCHIne Per l’InDUstrIAAGroAlIMentAre

BONDANI - CAT 2016.indd 1 08/01/16 10:03

Zeus

Adv

ertis

ing

ADV BONDANI_2016_coor.indd 1 29/02/16 15:38

20

FO

OD

&B

EVER

AG

E TE

CHN

OLO

GY

CA

TALO

GU

E20

16 e

ditio

n



IFP Packaging has been a solid reference point in the technology of packaging with heat-shrinkable film for over 25 years. In late 2011, it joined the group Tecno

Pack S.p.A., thus beginning a new journey of even greater technological, commercial and industrial development.Electronic continuous packaging machines, built on fully cantilevered structures, high performance, top opera-tional reliability, simplified sanitisation, versatility of use and project customisation are just some of the strong points of the IFP Packaging offer.Automatic loading systems, bundling machines of all sizes and complete end-of-line machines are totally customised by our knowledgeable and flexible techni-cal department. The primary goal of IFP Packaging is to conform the maximum state of the art according to the special requirements of customers. At the same time, the company offers the market strong and versatile mass-produced packaging machines, with an extremely in-

teresting price/quality ratio. With IFP Packaging, you will find the perfect tailor-made solution for any type of for-mat: ranging from controlled atmosphere to high-speed, up to top automation levels, always ensuring the best achievable result.Packaging, storing and protecting all food products, wrapping technical items (even large items as mattresses or radiators), creating and containing units of bottles or jars, presenting boxes in a shiny and invisible film, guar-anteeing the correct number, weight and quantity in each pack: IFP Packaging machines have no limits in their scope of application.

Currently industry leader, IFP offers a partnership that is useful and decisive for the success of each of its cus-tomers.

www.ifppackaging.it

IFP PACKAGING, SHRINK PACKAGING MACHINES

D a oltre 25 anni IFP Packaging rappresenta un sal-do punto di riferimento nella tecnologia di con-fezionamento in film termoretraibile.

A fine del 2011 entra a far parte del gruppo Tecno Pack S.p.A. iniziando così un nuovo percorso di ancora mag-giore sviluppo tecnologico, commerciale ed industriale.Macchine confezionatrici continue elettroniche realizza-te su strutture integralmente a sbalzo, alte prestazioni, grande affidabilità operativa, sanificabilità, versatilità d’uso e personalizzazione di progetto sono solo alcuni dei punti forti della proposta IFP Packaging.Sistemi di caricamento automatici, affardellatrici di ogni dimensione, fine linea completi, vengono completamen-te personalizzati dal nostro potente ed elastico ufficio tecnico. Conformare il massimo stato dell’arte secondo le peculiari esigenze dell’utenza, è l’obiettivo primario di IFP Packaging. Nel contempo, l’azienda propone al mercato anche confezionatrici robuste e versatili, realizzate in se-

rie, con un rapporto qualità prezzo di assoluto interesse.Qualsiasi tipo di formato trova con IFP Packaging il giu-sto abito su misura: le molteplici soluzioni ci vedono spa-ziare dall’atmosfera controllata, all’alta velocità, fino all’automatismo più esasperato, garantendo sempre il massimo risultato ottenibile.Confezionare, conservare e proteggere tutti i prodotti alimentari, avvolgere articoli tecnici (anche di grande formato come i materassi o i termosifoni) creare e con-tenere gruppi di bottiglie o vasetti, presentare scatole in una lucida ed invisibile pelle, garantire il giusto numero, peso, quantità all’interno di ogni confezione: non ci sono limiti all’applicazione delle macchine IFP Packaging.

Attualmente Leader di settore IFP propone una collabora-zione utile e determinante al successo di ogni suo utente.

www.ifppackaging.it

IFP PACKAGING, lINee DI CoNFezIoNAmeNtoIN FIlm termoretrAIbIle

IFP - CAT 2016 packaging.indd 1 01/03/16 16:48

22

FO

OD

&B

EVER

AG

E TE

CHN

OLO

GY

CA

TALO

GU

E20

16 e

ditio

n


PACKAGING FOOD&BEVERAGE TECHNOLOGY

B enefiting from 62 years of experience, OCME is known worldwide as one of the most trusted lead-ers and innovators in the sectors of packaging ma-

chinery and automatic materials handling. Based in Parma, OCME manufactures primary and sec-ondary packaging machines including fillers, end-of-line and logistic machines for the Beverage, Food, Detergent, Petro-chemical and Tissue sectors. In addition to being a supplier of machines, OCME provides ‘turn-key’ lines, offering complete solutions (also integrat-ing third-party machines). OCME pays particular attention to ecological and economic implications and its machines have been designed to optimize the use of space, energy, materials and time. This attention to environment and shareholder engagement has been certified ISO 9001.

With 7 subsidiaries in the world (UK, Mexico, China, France, USA, South Africa and Thailand) and over 40 agents,

OCME is present in over 50 countries in the 5 continents. Over 650 employees make up our global team, happy to work in a pleasant atmosphere and with a strong sense of corporate identity. OCME growing worldwide presence ensures answers and solutions to your commercial needs, as well as access to local aftercare support. These first 62 years of history are just the starting point for many other challenges that the future holds. Thanks to an advanced structure and, above all, to the people who are part of our team, OCME has created an environment that allows ideas to grow.

Today, as in 1954, the industries around the world know that if they want to realize an ambitious project or solve a problem, there is only one partner they can turn to OCME - Moving Ideas.

www.ocme.com

OCME ManufaCturEs priMary and sECOndary paCkaging MaChinEs

B eneficiando di 62 anni di esperienza, OCME è co-nosciuta in tutto il mondo come uno dei leader più affidabili e innovatori nel settore di macchine per

imballaggio e materiali automatici di movimentazione.Con sede a Parma OCME produce macchine per il confezio-namento primario e secondario, tra cui riempitrici, macchi-ne per il fine-linea e per la logistica nel settore delle bevande, prodotti alimentari, detergenti, settori del tessuto e petro-chimico. Oltre ad essere un fornitore di macchine, OCME fornisce linee complete ‘chiavi in mano’, offrendo soluzioni complete (anche con macchine di terze parti in dotazione). OCME, inoltre, presta particolare attenzione alla salvaguar-dia dell’ambiente e, per questo, le sue macchine sono state progettate per ottimizzare l’uso dello spazio, energia, ma-teriali e tempo. Questa attenzione per l’ambiente e per il miglioramento dei prodotti, dei processi e della qualità del servizio è stata certificata ISO 9001.Con 7 filiali nel mondo (UK, Messico, Cina, Francia, USA, Sud Africa, Tailandia) e oltre 40 agenti, OCME è presente in più

di 50 paesi in 5 continenti dove più di 650 dipendenti com-pongono il team globale felice di lavorare in un buon clima lavorativo e con un forte senso di appartenenza all’identità aziendale. La crescente presenza a livello mondiale significa che le ri-sposte e le soluzioni della OCME alle esigenze commercia-li, nonché l’accesso al supporto post-vendita, è capillare in tutto il mondo.Questi primi 62 anni di storia OCME sono solo il punto di partenza per tante altre sfide che riserva il futuro. Grazie a una struttura avanzata e, soprattutto, alle persone che fanno parte del team. È proprio grazie a loro che OCME ha creato un ambiente che permette alle idee di crescere. Oggi, come nel 1954, le industrie di tutto il mondo sanno che, se vogliono realizzare un progetto ambizioso o risolvere un problema, c’ è solo un partner a cui possono rivolgersi, OCME - Moving Ideas.

www.ocme.com

OCME prOduCE MaCChinE pEr il COnfEziOnaMEntO priMariO E sECOndariO

OCME - CAT 2016.indd 1 22/02/16 11:39

www.ocme.itwww.ocme.it

AntaresHigh and low level depalletiser for cartons and crates

PegasusRobot palletiser

PerseusHigh and low level palletisers

AltairLynxIn-line and rotary

Libra

GeminiCombined wrap-around and shrink-wrap packer

B

AlbatrosComputerised control system

P H&PB EO

PB EO

P H&PB EOP H&P EOP EOP

EO

H&PB

T

P H&PB EOT

P H&PB EOT

P H&PB EOT

P H&PB EOT

P H&PB EOT P H&PB EOT

A revolutionary innovation that increases pack aesthetics in an incredible way, whilst D

e/Pa

lletis

ing

Pack

agin

g

Filli

ng

Supe

rvis

ing

EOP H&PB

Auriga

Automated guided vehicles

Pyxis MizarConveyorsRotating Divider for loose containers

The compact versatile cross sector solution

P

H&P

B

T

P

H&P

B

EOT

Han

dlin

g

Inte

grat

ed s

olut

ions

Beverage Petrochemical

Home&Personal Care Tissue Edible Oil

In-line and rotary weight

Innovative packaging solutions achieved by our Vega

Wrap-around packers

High and low level depalletiser for loose bottles, cans and jerry cans

Dorado

Shrink wrapping machine

VegaB

OrionIn-line high and low level palletisers

Touchless conveyors for bundles, multipacks and cartons

Manipulating device

C

M

Y

CM

MY

CY

CMY

K

Ocme_Solutions.pdf 1 18/02/2016 12:05:36

24

FO

OD

&B

EVER

AG

E TE

CHN

OLO

GY

CA

TALO

GU

E20

16 e

ditio

n


PACKAGING FOOD&BEVERAGE TECHNOLOGY

n ew brand identity: from the origins to the future January 2016. PFM Packaging Machinery, the in-dustrial group that manufactures � exible packag-

ing machines and technology, presents its new logo.Created by Heinz Weibl, an internationally renowned de-signer, the logo not only represents the company graphical-ly, but also tells its story. Starting from the origins, it recalls the historical design of the � rst logo created by the founder of the company, Pietro Fioravanti, and leads up to today, ex-pressing the main values of the company and projecting it into the future.

Stability, power, balance, essentialism, and clearness are all communicated by Helvetica, a clean, simple font without frills or virtuosity, conveying a timeless clarity that is further enhanced by Weibl’s colour choice of midnight blue.“After our � rst 50 years, and along with the process of con-

tinual transformation,” said Andrea Fioravanti, “we strongly felt the need to con� rm our deep identity to international markets. Only a decisive action, such as the radical change of corporate branding, can express what we feel ourselves to be, and above all can give an idea of how we want to ap-proach the future. I believe this update fully re� ects what PFM does for its clients: it o� ers reliability that comes from half a century of work in the packaging sector; it maintains transparency in all relations; it simpli� es complexity by de-signing truly technological solutions. This is not all, how-ever. Our industrial group looks towards the future without distractions, intent on anticipating the request for � exible packaging. It is a concept that Heinz Weibl majestically rep-resents with the F of our acronym that stands erect, like a lighthouse showing the way.”

www.pfm.it

pfM paCkaging MaChinEryBaCk tO thE futurE

n ova brand identity: dalle origini al futuro Gennaio 2016, PFM Packaging Machinery, gruppo industriale che produce macchine e

tecnologie per il confezionamento fl essibile, presenta il suo nuovo logo. Creato da Heinz Weibl, designer di fama internazionale, il marchio non si limita a rappresentare l’azienda grafi camente, ma la racconta: partendo dalle origini, rievocando il disegno storico del logo dei primor-di, ideato dallo stesso fondatore, Pietro Fioravanti, per giungere ad oggi, esprimendo i valori portanti dell’a-zienda, e proiettarsi sugli scenari futuri.Solidità, forza, equilibrio, essenzialità e chiarezza sono i contenuti comunicati da un carattere tipografi co pulito, semplice, privo di fronzoli e virtuosismi: l’ Helvetica, la cui intramontabile chiarezza viene confermata dalla scelta cromatica effettuata da Weibl, il blu notte. “Dopo i nostri primi 50 anni, e un processo di trasforma-zione continua - racconta Andrea Fioravanti - abbiamo

sentito forte l’esigenza di confermare ai mercati interna-zionali la nostra identità profonda. Solo un’azione deci-sa come il cambiamento radicale di corporate branding può esprimere quello che sentiamo di essere e, soprat-tutto può dare un’idea di come vogliamo approcciarci al futuro. Credo che questo aggiornamento rifl etta piena-mente ciò che PFM fa per i suoi clienti: offre l’affi dabili-tà che fonda le sue radici in mezzo secolo di lavoro nel settore del packaging, opera con chiarezza nelle relazio-ni, semplifi ca la complessità progettando vere soluzioni tecnologiche. Ma non basta, il nostro gruppo industria-le guarda al futuro senza distrazioni teso ad anticipare la domanda in materia di packaging fl essibile, proprio come Heinz Weibl ha magistralmente rappresentato con quella F del nostro acronimo che si erge a mo’ di faro, a tracciare la rotta ”.

www.pfm.it

pfM paCKaGinG MaChinErYBaCK tO thE futurE

PFM GROUP - CAT 2016 packaging.indd 1 27/01/16 14:01

26

FO

OD

&B

EVER

AG

E TE

CHN

OLO

GY

CA

TALO

GU

E20

16 e

ditio

n



F iorini International produce a wide range of paper bags and printed paper rolls for packaging a big variety of products such as flour, sugar, salt, pasta, cakes, chocolates, sweets,

vegetables, pet-food, coal, litters, glue, soap, plaster, cigarettes and reams. A quality packaging guarantees a good food preservation and hygiene. Fiorini International provide a reliable and practical product as well as attractive and eco-friendly.. It is very important to choose the packaging that best suits each client considering the selection of the materials, the shape and garnish. One of the compa-ny’s main assets is to be flexible and thus able to satisfy a vast array of requests. Fiorini International’s products are best suited for the food sector: they only use high-quality raw materials, coming from certi-fied forests, which are then accurately selected for food packaging. The BRC certification guarantees high hygiene standards of both the package and the manufacturing department. The integrity of the seal is always guaranteed as well as the possibility to process the product with filling machines without further customisation. Fiorini International distribute worldwide and on-time. For the food sector the company provides bags with transparent or net windows, using

water-based ink which does not transfer to the product, and only natural adhesive - all this at a very convenient price.

“Our customers find plenty of advantages using our products”, ex-plained a Production Manager. “Thanks to us, our customers are now able to use a product which allows them to operate their filling machines at high-level performances. The bag does not bend, the notches are well-placed, the filling process runs smoothly. This is es-sential from a manufacturing point of view. Also, our bags are stylish and this alone contributes to promote the product. This is crucial for marketing.”

Fiorini International is based in Central Italy, in the Marche region, and from 2001 a new manufacturing plant has opened in Prague, Czech Republic, in order to better reach the European markets. The company says: “Having said all this, being a guarantee for our clients, we can confidently consider ourselves as a leader company in the flexible packaging sector. We export all over the world and we in-tend to keep improving our work”.

Fiorini international and the excellence in Flexible packaging

F iorini International produce sacchi e sacchetti di carta di tutti i tipi, e bobine di carta stampata per contenere prodotti ali-mentari quali farina, zucchero, sale, pasta, dolci, cioccolotini,

caramelle, ortaggi, pet-food, carbone, lettiere, collanti, detersivi, stuc-co, sigarette, risme di carta. Un packaging di qualità garantisce una buona conservazione e per l’igiene; Fiorini si impegna anche per for-nire un prodotto pratico e affidabile, proveniente da fonti rinnovabili, e con una forte valenza estetica. Infatti è importante saper seleziona-re il packaging più adatto per ogni cliente: cominciando dalla selezio-ne dei materiali che lo compongono, fino ad arrivare alla forma e alla decorazione. Uno dei punti di forza dell’azienda è la flessibilità, che le permette di essere in grado di soddisfare un’ampia gamma di richie-ste. I prodotti di Fiorini International son particolarmente indicati per il settore alimentare: le materie prime utilizzate sono di primissima qualità e provenienti da foreste certificate, sono poi selezionate spe-cificamente per contenere prodotti alimentari, e la certificazione BRC garantisce l’igiene dell’imballo e del reparto in cui viene prodotto.È inoltre garantita la tenuta dell’imballo, la macchinabilità sulle mac-chine insaccatrici senza il bisogno di particolari personalizzazioni, e la puntualità delle consegne in ogni parte del mondo. Per il settore ali-mentare l’azienda è in grado di produrre anche sacchetti con finestre

trasparenti o di rete, utilizzando inchiostri ad acqua, con zero trasmi-grazione, e unicamente colle alimentari, il tutto a prezzo di mercato. “I nostri clienti hanno molti vantaggi a utilizzare i nostri prodotti” ci spiega un Responsabile di produzione. “Grazie a noi i clienti utilizzano un prodotto che risponde alle esigenze dei loro macchinari insacca-tori, garantendo elevate prestazioni: il sacchetto non si piega, ha le tacche al posto giusto, il lavoro di riempimento scorre con regolari-tà. Questo dal punto di vista della produzione è essenziale. Inoltre il sacchetto che forniamo è bello, e promuove da solo la vendita del prodotto contenuto. Questo è fondamentale dal punto di vista del marketing.”

La Fiorini International ha la propria produzione storicamente in Ita-lia, nelle Marche, in pieno centro Italia. Un nuovo sito di produzione è attivo poi dal 2001 a Praga in Repubblica Ceca, per raggiungere più comodamente i mercati Europei. “Con queste premesse possiamo affermare” ci dicono dall’azienda “a garanzia dei nostri clienti, di es-sere un’azienda all’avanguardia nel settore degli imballaggi flessibili. Esportiamo in tutto il mondo, e vogliamo continuare a percorrere la strada del miglioramento continuo.”

Fiorini international e l’eccellenza nel packaging Flessibile

FIORINI - CAT 2016 packaging.indd 1 21/03/16 13:33

The NaTural Wayto Dress Your Products

FioriNi iNTerNaTioNal S.p.a. Via Maestri del Lavoro, 13 - Z.I. Pontelucerta - 60012 Trecastelli (An) - Italy

Tel +39 071 791171 - Fax +39 071 [email protected] - www.fiorinint.it

FIORNINI ADV anno2016.indd 3 03/03/16 10:50

28

FO

OD

&B

EVER

AG

E TE

CHN

OLO

GY

CA

TALO

GU

E20

16 e

ditio

n



F rom preliminary analysis of the business opportunity through engineering and design of the production plant, then supply of recognized European quality brand new or

used-refurbished machines with over 50 highly specialized engi-neers on the different machines and processes: many and several services offered by BBM Packaging Solutions, company specialized in the packaging and in the supply of “turn-key” plants for water and soft drinks, with headquarter in San Pellegrino Terme (BG).

Analysis & consults The long-term and widely renowned experience in the beverage market has allowed the company to provide a 360° advice, based on the understanding of local market trends and consumer’s de-mand, thus provide cost-effective and flexible solutions able to suit your business plans within the timeline you foreseen. • Study and design of containers for your Brand identity. • Engineering and line modification to fit into your facilities. • Reliable budgets for line dismantling and reassembling; modifi-

cation, upgrades, conversion. • Maintenance package. • Relocation of existing lines.

• Improvement opportunities for cost saving and productivity en-hancing.

Turnkey supplies, with no comprimiseWhether you go for a brand new or refurbished line, BBM makes available an unique contractor able to offer and manage a turnkey package: starting from line and process engineering, then machines and subordinates equipment supply, till service activities on field.

The value-addes technical services you need to run your plant effectively BBM can assist during the life cycle of the machines. • Hotline support to help you to rapidly identify the malfunctioning

driving your skilled engineers step by step for immediately fix it. • On-site field technical service to solve the emergency making

your machines run again in the shortest possible time. • Spare parts supply genuine and/or alternative. • Peak season on-site assistance assuring a round-the-clock pres-

ence while the line are running at the most. • Full-service maintenance to keep the performance at the top for

the whole lifecycle of your machines.

BBM, supply oF “Turn-key” plAnTs

D all’analisi preliminare del business all’ingegnerizza-zione del plant produttivo, dalla fornitura di macchi-nari nuovi o usati-revisionati al servizio di assistenza

tecnica con oltre 50 tecnici specializzati su diversi macchinari e processi: sono tanti i servizi offerti da BBM Packaging Solutions, società specializzata nel confezionamento, imballaggio automa-tizzato e fornitura di impianti «chiavi in mano» con sede a San Pellegrino Terme (BG). Analisi & consulenza La lunga e rinomata esperienza nel mercato del beverage ha por-tato l’azienda a fornire una consulenza a 360°, basata sullo studio dei trend del mercato locale e della domanda del consumatore, fornendo soluzioni flessibili ed economicamente vantaggiose in grado di adattarsi ai singoli business plan nelle tempistiche pro-grammate. • Studio e disegno delle bottiglie per migliorare l’identità del Vo-

stro brand. • Engineering e modifica di linee adatte alle Vostre strutture. • Budget affidabili per smontaggio e rimontaggio di linee; modi-

fiche; upgrade e conversioni. • Pacchetti manutenzione. • Rilocazione di linee esistenti.

• Opportunità di miglioramento per un risparmio di costi e un aumento della produttività.

Forniture chiavi in mano, senza compromessi Sia per le linee nuove o revisionate, BBM mette a disposizione del cliente un unico referente in grado di gestire un pacchetto chiavi in mano: un supporto che va dall’engineering della linea e di pro-cesso alla fornitura di macchinari e attrezzatura subordinata, fino all’attività di service on-site.

Il valore aggiunto dell’assistenza tecnica per far funzionare il vostro impianto efficacemente BBM può assistervi durante l’intero ciclo di vita delle macchine. • Supporto hotline individuando rapidamente il malfunziona-

mento e guidando i vostri tecnici step-by-step nella riparazione. • Assistenza tecnica on-site per risolvere le emergenze facendo

ripartire le vostre macchine nel minor tempo possibile. • Fornitura di ricambi originali e/o alternativi. • Assistenza durante i picchi di stagione, assicurando una pre-

senza a 360° mentre la linea sta funzionando al massimo. • Accordi full-service per mantenere le performance al top du-

rante il ciclo di vita delle Vostre macchine.

BBM, FornIturA DI IMpIAntI «chIAvI In MAno»Pantone®

2758 CPantone®

877 C

BBM PACKAGING - CAT 2016 packaging.indd 1 02/02/16 11:16

TURNKEY SOLUTIONS FOR WATER AND BEVERAGE PLANTS

VALUE - ADDED TECHNICAL SERVICES

SPARE PARTS

RETROFIT, UPGRADES & LINE CONVERSIONS

San Pellegrino Terme · 24016 ∙ Bergamo (BG) Italy · Tel +39 0345.23642

www.bbmpackaging.com


30

FO

OD

&B

EVER

AG

E TE

CHN

OLO

GY

CA

TALO

GU

E20

16 e

ditio

n



Established in the 1976, TMG has been successful on several global markets, thanks to a continuous re-search and a professional experience that allowed

to gain a qualified technological know-how, to apply in the end of line systems all over the world. The direct con-tact with the customer is a chance of constant innovation of our packing machineries range, resulting progressive-ly suitable for any needs and different applications. The products range comprises carton erector, carton packer, carton sealer, palettisers, depalettisers and robot. These machines are often combined together to supply com-plete turnkey solutions of automated packing systems end-of-line. In the latest years, TMG has realized many pal-letizing and packaging systems of different products, es-pecially in Beverage sector, in which it has satisfied many international customer’s needs. Nowadays TMG produces around 200 palletisers per year and has installed almost 7000 palletising systems all over the world since 39 years.

Production range: Palletisers - Carton erectors - Case Packers and unpackers - Tape and Glue sealers - Robots - Stretch wrappers - Conveyors and transports - Pallet han-dling systems.

Market sectors: TMG Impianti is specialized in handling bottles and containers, both glass and plastic (like PVC and PET) for the food sector, beverage (wine, juices, beer etc.), chemical and home and care industry (shampoo, detergents, washing powders) and special applications like mineral oil and edible oil. Another important industry where TMG Impianti is present is the “big bags and sacks”. The company is one of European leading company in the sacks - big bags palletisation with several applications around the world in this industry.

www.tmgimpianti.com

TMG IMPIanTI, PackInG and PallETIzInG soluTIons

F ondata nel 1976, TMG Impianti ha saputo imporsi nei mercati mondiali attraverso la continua applicazione delle esperienze maturate sul campo, riuscendo così

a sviluppare una qualificata conoscenza tecnologica, gra-zie ad innumerevoli installazioni di proprie linee in tutto il mondo. Il contatto diretto con i clienti permette una costan-te innovazione dei macchinari, risultanti, quindi, sempre più adatti alle molteplici esigenze in continua evoluzione. La linea di prodotti comprende formatori di cartoni, incar-tonatrici, chiudi cartoni, palettizzatori, depalettizzatori e ro-bot. Queste macchine sono poi combinate assieme in modo da fornire complete soluzioni chiavi in mano di impianti di confezionamento nel fine linea. Negli anni TMG ha realizza-to molteplici impianti per la palettizzazione e confeziona-mento di svariati prodotti soprattutto nel settore Beverage, dove, applicando come sempre passione ed entusiasmo, si è assicurata la fiducia di prestigiose organizzazioni multina-zionali. Oggigiorno TMG progetta e realizza, in una prospet-tiva annuale, circa 200 linee di incartonamento e di palettiz-zazione. In quasi 40 anni di attività, TMG ha installato circa

7000 macchine in tutto il mondo, un traguardo importante che rispecchia l’elevata professionalità dell’azienda.

Gamma di prodotti: Palettizzatori - Formatori di cartoni - Incartonatrici incassettatrici - Chiudi cartoni - Robots - Av-volgitori - Trasporti e dispositivi - Sistemi di movimentazio-ne pallet.

Settori di mercato: TMG Impianti è specializzata nella mo-vimentazione di bottiglie e contenitori, di vetro e di plastica (come PVC e PET), nei settori del food, beverage (vino, succhi, birra ecc), chimico e dei prodotti di cura personale e di casa (shampoo, detergenti, detersivi ecc) e alcune applicazioni specifiche come gli olii alimentari. Un altro settore impor-tante per TMG è quello dei sacchi e dei contenitori. TMG è una delle realtà leader in Europa nel settore del winery, of-frendo soluzioni personalizzate per l’incartonamento, la pa-lettizzazione e la movimentazione interna dei prodotti.

www.tmgimpianti.com

TMG IMPIANTI, SOLUZIONI dI INcArTONAMeNTO e PALLeTTIZZAZIONe

TMG - CAT 2016 packaging.indd 1 04/03/16 16:16


32

FO

OD

&B

EVER

ag

E TE

cHn

OLO

gY

ca

TaLO

gU

E20

16 e

ditio

n



T he Rfresh Elite® tray from LINPAC is the ultimate solution for meat and poultry packers in search of a sustainable tray packaging option. The tray uses a unique, patented

sealant on the tray � ange to create a secure seal with the lidding � lm, removing the need for the industry standard laminated PE base � lm. The ingenious sealing system is food contact appro-ved and can be removed in the hot wash processes employed by Europe’s PET recycling companies, meaning a recycled Elite tray will yield 100 per cent crystal clear PET - a breakthrough in tray packaging design. On the packers’ production line, the sealing system requires a reduced seal temperature and dwell time, delivering an estimated 15 per cent reduction in energy use per line and higher packing speeds, boosting capacity. For retailers, the improved seal strength, which Elite o� ers, mini-mises the number of leaking packs helping to reduce in-store food waste. Elite trays are manufactured from up to 95 per cent post consumer recyclate and are low weight; yet retain pro-duct performance thanks to process and product innovation

at LINPAC. rPET is a popular packaging material choice due to its versatility, recyclability, lightweight nature, on-shelf appeal, barrier and food safe properties. LINPAC has invested heavily in its in-house super cleaning technology, which is EFSA appro-ved, to ensure its rPET meets stringent safety and hygiene rules for food packaging. Suppliers of post-consumer � ake to LINPAC undergo a rigorous approval process to meet EFSA standards and LINPAC carries out extraction and migration testing regu-larly to ensure processes are exceeding European food safety standards. Ricardo Cabeza, managing director for southern Europe at LINPAC, said: “The challenge for plastics processors supplying the industry is ensuring that the recycled plastic is suitable for food use and free from contamination. Our custo-mers can have complete peace of mind when choosing LINPAC rPET that this is the case. The entire structure is food safe, visi-ble, controlled and challenged.”

www.linpacpackaging.com

a susTaInaBlY ElITE Pack soluTIon FRoM lInPac

I l vassoio Rfresh Elite® di LINPAC è la soluzione defi nitiva per i confezionatori di carni e pollame alla ricerca di una soluzione di packaging in vassoio che sia sostenibile. Il vassoio utilizza

un inimitabile sigillante brevettato sulla fl angia del vassoio per creare un sigillo sicuro con la pellicola di copertura, eliminando in tal modo la necessità della pellicola di base in PE laminato che rap-presenta uno standard nel settore. Questo intelligente sistema di sigillatura è stato approvato per il contatto alimentare e può essere rimosso tramite i processi di lavaggio a caldo impiegati dalle azien-de di riciclaggio PET europee, di modo che un vassoio Elite riciclato possa offrire il 100% di PET assolutamente trasparente, un’innova-zione straordinaria nel design del packaging per i vassoi. Sulla linea di produzione dei confezionatori, il sistema di sigillatura richiede una temperatura di sigillo e un tempo di riposo inferiori e offre una riduzione stimata del 15% per quanto riguarda l’utilizzo energetico per linea e maggiori velocità di confezionamento, in modo da au-mentare la capacità. Per i rivenditori al dettaglio, la migliore forza della chiusura offerta da Elite minimizza il numero di confezioni che presentano perdite ed aiuta a ridurre gli sprechi alimentari in negozio. I vassoi Elite sono prodotti utilizzando fi no al 95% di mate-riali riciclati post-consumo e presentano un peso ridotto. Tuttavia,

conservano le prestazioni del prodotto grazie al processo e all’in-novazione del prodotto di LINPAC. L’rPET è una scelta di packaging popolare grazie alla sua versatilità, riciclabilità, leggerezza, aspet-to in esposizione e proprietà di barriera e di sicurezza alimentare. LINPAC ha investito molto nella sua tecnologia di pulizia interna, approvata da EFSA, allo scopo di assicurare che il suo rPET risponda alle rigide normative in materia di sicurezza e igiene per il settore del packaging alimentare. I fornitori di materiali post-consumo a LINPAC vengono sottoposti ad un rigoroso processo di approva-zione in modo da rispondere agli standard EFSA e LINPAC esegue test di estrazione e migrazione in maniera regolare per assicurare che i processi superino gli standard di sicurezza alimentare europei. Ricardo Cabeza, Direttore generale per l’Europa meridionale presso LINPAC, ha dichiarato: “La sfi da per i trasformatori di plastica che riforniscono l’industria sta nell’assicurare che la plastica riciclata sia idonea per l’utilizzo alimentare e priva di contaminazioni. I nostri clienti possono stare certi che le cose stanno proprio così quando scelgono l’rPET di LINPAC. L’intera struttura è sicura dal punto di vi-sta alimentare, visibile, controllata e sempre messa alla prova”.

www.linpacpackaging.com

UNA SOLUZIONe dI PAcKAGING d’eLITe SOSTeNIBILe dA LINPAc

LINPAC - CAT 2016.indd 1 15/12/15 11:27

LINPAC Packaging Verona s.r.l., Via Monte Pastello 40, San Giovanni Lupatoto, 37057 VR, Italy

t: +39 045 92 16 411 e: [email protected]

fresh thinking | linpac.com

fresh thinking...

Rfresh Elite®

the next generation in MAP packaging

Rfresh Elite delivers weight reductions below the industry PET/PE standard

Save up to 15% in line energy consumption and increase output by up to 10%

Fresh, crystal clear presentation

Improve your tray seal strength by up to 60% reducing wase and returns

Improved visual inspection pre and post sealing


34

FO

OD

&B

EVER

ag

E TE

cHn

OLO

gY

ca

TaLO

gU

E20

16 e

ditio

n


LaBELLing FOOD&BEVERagE TEcHnOLOgY

M odularity, fl exibility and prac-ticality are the three key con-cepts expressing the philoso-

phy of a company whose strong point is technological innovation. This is what the market wants and this is what customers get from the Italian based Makro Labelling, international stand-ard setter for industrial labellers in the Beverage, Food, Personal & Home Care and Pharmaceutical sectors.

The thirty years’ experience of its founders, extensive international sales network (the Italian branch, plus Makro UK (distributor for Great Britain), agents and representatives) and rapid and precise before and after sales service, together with operational fl exibility and the ability to anticipate the market’s needs, all enable the company to satisfy every labelling need and ex-pand constantly on markets in Europe, America, Russia, the ex-Soviet Union countries and the Middle East.

a range of labellers for production speeds of 1,500 to 50,000 b/hThe Makro Labelling range includes labellers able to process from 1,500 to 50,000 bottles per hour, applying up to fi ve labels per bottle and available in wet glue, hot melt, self-adhesive and combined versions. For companies not requiring high production speeds, the MAK 01, MAK 02 and MAK1 labellers provide speeds of up to 12,000 b/h with mechanical or electronic rotation of the bottle plates.

With special applications and able to cope with pro-duction speeds of up to 50,000 b/h, the MAK 2, 3, 4, 5, 6, 7 and 8 labellers, on the other hand, satisfy the needs of medium to large companies. The range includes a high speed self-adhesive labeller with reel winders and non-stop system enabling pro-duction to continue at maximum speed even during reel changes and a combined labeller to apply the fi s-cal guarantee seal.

For the high-volume PET labelling mar-ket (water and soft drinks sectors in par-ticular), Makro Labelling has developed the new MAK Roll Feed line of rotary la-bellers with production speeds of 6,000

to 40,000 b/h. The use of wrap-round plastic labels on a reel with hot melt application has maximum economic benefi ts for production with respect to traditional OPP or pre-cut paper labels. The modularity of the MAK Roll Feed also allows the roll feed unit to be replaced with a hot melt unit for pre-cut, wet glue or self-adhesive la-bels, satisfying the need for maximum operational and confi guration fl exibility.

MAKLINE is a linear self-adhesive labeller designed to package blocks of phials and ampoules with a volume of 5 to 25 ml. Designed for the Pharmaceutical and Per-sonal & Home Care industries, these labellers can print technical data on the label and adapt to the format of the ampoule on which the labels are applied. In com-mon with the entire Makro range, the MAKLINE is fi tted with the Vision Control system to verify the precision of the packaging and manage rejects.

Introduced onto the market in 2014, the Follower opti-cal guide system (an exclusive Makro patent) enables the bottles to be aligned for application of labels in pre-cise positions with respect to a reference on the bottle and reduces format change times. It is available in car-bon fi bre and fi tted with a line scan camera.

The Makro Labelling technical and R&D departments work incessantly to develop pioneering products with an unlimited working life and able to satisfy all produc-tion needs - a constant and systematic commitment which over the years has led the company to deposit numerous patents giving its labellers maximum func-tionality and ease of use.

www.makrolabelling.it

MakRo laBEllInG: TEcHnoloGY In EVoluTIon on a sMall and laRGE scalE

MAKRO LABELLING - CAT 2016.indd 1 22/01/16 15:16

MODULARITY, FLEXIBILITY, PRACTICALITY

Technology for great numbers

Makro Labelling srl • Via S. Giovanna d’Arco, 9 • 46044 Goito (MN) • ItalyTel.: +39 0376 1872203 • Fax: +39 0376 1872197 • [email protected] • www.makrolabelling.it

Labelling in the Beverage, Food, Home & Personal Care and Pharma-ceutical industries has always been our passion and our primary activity. Innovative technologies, an interna-tional sales and after-sales network and configuration flexibility are our strong points.Satisfying all labelling needs from 1,500 to 50,000 b/h is our result, ap-preciated by companies of every size. The more than 400 success stories throughout the world during six years of activity is our greatest confirmation.

36

FO

OD

&B

EVER

ag

E TE

cHn

OLO

gY

ca

TaLO

gU

E20

16 e

ditio

n


LaBELLing FOOD&BEVERagE TEcHnOLOgY

a LTECH - Advanced Labelling Technologies - engi-neers, manufactures and distributes systems for labelling and material identi� cation, by means of

self-adhesive labels. Its range encompasses the following products: the self-adhesive ALstep (low-cost) and ALritma (hi-tech) labelling heads, the ALline in-line labelling systems suitable for front/back and wrap-around labelling of jars, cans and bottles, the ALcode real time printing/application units for labelling boxes, pallets and bundles; besides the trading of SATO barcodes printers sold in Thermal label printers family with their software and ribbons. Latest development is the advanced range ALpharma for the labelling of pharmaceutical products. ALTECH machines are used in every industry � eld, from food to cosmetics, from pharmaceutics to chemistry.

Today, the company distributes its systems all over the Ita-lian territory through a network of direct sales , while the commercial distribution for Europe and overseas takes place in more than 50 countries through a network of 80

quali� ed resellers and 3 subsidiary companies in the Uni-ted Kingdom, the United States and Argentina.

our strengths• Expert personnel with a true passion for engineering.• Machines and systems designed to be modular and expan-

dable; all components are accessible and interchangeable.• Use of high-strength alloys, high-reliability electronic

and pneumatic components.• Compliance with safety requirements and good manu-

facturing practices.

consulting and servicesOur expert knowledge of logistics, packaging and mate-rials issues allows us to con� gure our labellers to solve any labelling problems and to create customized solutions for our customers.

www.altech.it

alTEcH, sYsTEMs FoR laBEllInG

A LTECH - Advanced Labelling Technologies - progetta, costruisce e distribuisce macchine etichettatrici indu-striali e sistemi di identifi cazione dei materiali median-

te etichette autoadesive. La gamma di sua produzione compren-de: applicatori di etichette autoadesive ALstep (low-cost), testate etichettatrici ALritma (hi-tech), sistemi di etichettatura lineari ALline per l’etichettatura fronte/retro e avvolgente di fl aconi, barattoli, bottiglie, sistemi di Stampa Applicazione di etichette in tempo reale ALcode per l’etichettatura di scatole, fardelli e pal-let; oltre alla commercializzazione di stampanti SATO per codi-ci a barre, unitamente a relativo software e gamma di nastri di stampa. Negli ultimi anni ALTECH ha integrato tra i suoi prodotti i sistemi di etichettatura per prodotti farmaceutici ALpharma. Le etichettatrici ALTECH vengono utilizzate in tutti i settori indu-striali, per l’etichettatura dei prodotti alimentari, l’etichettatura di cosmetici ed etichettatura di prodotti chimici e farmaceutici. Oggi l’azienda distribuisce i suoi sistemi su tutto il territorio italia-no attraverso una rete di vendita diretta, mentre la distribuzione commerciale per l’Europa e d’oltreoceano avviene in più di 50

paesi tramite una rete di 80 distributori qualifi cati e 3 sussidiarie nel Regno Unito, USA e Argentina.

Punti di forza:• Personale esperto con una grande passione per l’ingegneria.• Macchine e sistemi concepiti in modo modulare ed

espandibile, tutti gli elementi sono accessibili e inter-cambiabili.

• Utilizzo leghe ad alta resistenza, componenti elettronici e pneumatici di elevata affi dabilità.

• Rispetto normative sulla sicurezza e la buona fabbricazione.

consulenza e servizi:L’approfondita conoscenza delle problematiche logistiche, di packaging e dei materiali ci consentono di confi gurare le macchine etichettatrici per qualsiasi problema di etichettatu-ra e di defi nire soluzioni personalizzate per i nostri clienti.

www.altech.it

ALTecH, MAccHINe eTIcHeTTATrIcI INdUSTrIALI

CAT 2016-ALTECH.indd 1 10/12/15 11:19


38

FO

OD

&B

EVER

AG

E TE

CHN

OLO

GY

CA

TALO

GU

E20

16 e

ditio

n


LabeLLing FOOD&beVeRage TeCHnOLOgY

A .M.D. ELECTRONIC, a reliable partner for the quality control of your products starting from

the artwork printed on to the packag-ing to the detection of contaminants in food.

Since 1989, when it was founded, A.M.D. Electronic has shown particular interest in the feedback of those who work directly in the food, pharmaceutical, cos-metics and graphic domain in order to be able to bet-ter respond to customer needs with a wide range of solutions.

The Vision Systems for the detection of contaminants in the products are based on the innovative technol-ogy NIR (infrared), which allows working in the shad-ow area that is not covered by the Metal Detector and X-Ray systems, i.e. when the contaminant’s spe-cific weight is similar or even lower than that of the product itself. This technology allows you to intercept foreign bodies such as insects, wood, plastic, paper, non-calcified bones, etc.

The Electronic Proofreading Systems for the inspec-tion of text documents and artwork, as well as the inspection of printed materials, guaranteeing the quality, the integrity and the total absence of errors on your packaging. Automating the proofreading process to control your materials is crucial for all those companies who realize how errors could adversely af-fect one’s image in the market and what economical damage could result from a mistake that escapes the human eye.

The Italian and European regulations are increasingly strict on labeling and packaging and are becoming an additional incentive for automation of inspections.

Our partners have developed specific software sys-tems able to operate with extreme efficiency and speed, removing the risk of human error. With these solutions, you can verify both graphics and text, as-suring the conformity of the documentation under in-spection to the reference document or approved art-work, during the development of the artworks as well as during the final production of printed material.

The Artwork management Systems provide optimi-zation of the artwork creation process, reducing the time of the various steps and removing redundancies.

Artwork creation involves several spe-cific functions: graphic studios, legal dept., translations, marketing, etc. until you get to the Printer. Each department must contribute to the final appearance

of the package in order to have a compliant yet at-tractive appearance for the consumer whilst at the same time, containing all the required information for which accuracy is crucial.

The exchange of information among the various op-erators requires several steps.

The Kallik solution provides a “package of functions” which are developed expressly to handle all the nec-essary information - both graphic and text - for the artwork creation process. The system also integrates with the customer’s own existing database, organ-izing it and placing it in the appropriate packaging space, and then prepares a complete artwork, ready for approval.

It is important to highlight that the system is “scal-able”, meaning that it can be “assembled” from the simplest solutions, asset management and approval, to a fully integrated end-to-end artwork work man-agement solution.

Among the systems for anti-counterfeiting, it is note-worthy the revolutionary HD BARCODE system. It looks like a Datamatrix, but able to contain about 170 times more information, or 50,000 times more infor-mation than a traditional EAN bar code system. HD barcode can hold up to 700kb!

At “Track & Trace” level, HD Barcode become a very ef-fective tool, since it allows full traceability of a prod-uct. In the food domain, it can become an important tool to control and guarantee the originality of a pro-duction. As for the consumer, HD Barcode becomes a very useful tool to have information about the prod-uct since, differently to a normal QR Code, it can be read through a normal Smartphone without needing an Internet connection. In this way, a buyer in a supermarket may be able to make an informed choice on the purchase of prod-ucts if equipped with HD Barcode, because for each of them, has at disposal information on the entire pro-duction chain.

www.amdelectronic.com

A.M.D. ElEctronic, coMplEtE SolutionS for Error-frEE lAbElS & pAckAging

AMD ELECTRONIC - CAT 2016.indd 1 09/02/16 11:06


40

FO

OD

&b

eVeR

ag

e Te

CHn

OLO

gY

Ca

TaLO

gU

e20

16 e

ditio

n


enD-OF-Line SYSTeMS FOOD&beVeRage TeCHnOLOgY

Automatic packaging the Microline wayA leading light in the Emilia Romagna packaging valley, Microline’s team of experts can boast more

than thirty years experience in automated packaging ma-chinery manufacturing, in particular end-of-line systems, such as bundlers, top- or side-load case packers, conveyor belts and palletisers. Our machinery modular design al-lows its engineers to tailor each packaging system to suit the requirements of customers from a wide range of sec-tors, including food, tissue and cosmetics.

Indeed, the company o� ers highly specialised, custom-ised and � exible solutions:• turnkey conveyor, orientation and (top- or side-loading)

case packing and palletising lines;• turnkey complete conveyor, orientation, bundling (sec-

ondary packaging) and palletising lines.

Microline can also improve an existing system’s e� ciency and productivity by integrating a single piece of machinery into the production line and reorganising the entire system to meet changing needs. Our turnkey services also include design, layout, transportation, assembly, maintenance, commissioning, sta� training and supply of spare parts. En-vironmental issues have always been a matter of paramount importance to the Bologna-based company, which develops its systems according to a sustainable development approach that guarantees both economic advantages and a low impact on the ecosystem. All Microline bundlers use the entire � lm roll, without generating trimmings or scraps, thereby allow-ing savings of around 25/30% in wrapping material and con-sequent energy savings for shrink-wrapping devices, as well as cutting the disposal costs for wrapping material scrap.

www.microlinesrl.it

MicrolinE, QuAlitY, rEliAbilitY AnD AftEr-SAlES Support

I l confezionamento automatico secondo MicrolineFiore all’occhiello della packaging valley emiliana, i professionisti Microline hanno un’esperienza ultra-

trentennale nella produzione di macchine automatiche per imballaggio di fi ne linea come fardellatrici, incartona-trici a riempimento orizzontale o verticale, nastri traspor-tatori e pallettizzatori.

La concezione modulare delle macchine permette ai tec-nici di personalizzare ciascun sistema di confezionamento in base alle esigenze dei clienti provenienti dai settori più diversi, dal food, al tissue, alla cosmetica.

L’azienda offre infatti soluzioni altamente specializzate, personalizzate e versatili:• linee complete di trasporto, orientamento ed incartona-

mento a riempimento orizzontale/verticale e palletiz-zazione “turn key”;

• linee complete di trasporto, orientamento, fardellamen-to (packaging secondario) e palletizzazione “turn key” .

Microline è inoltre in grado di migliorare l’effi cienza e la pro-duttività di un impianto preesistente, inserendo nella linea produttiva un singolo macchinario e riorganizzando l’inte-ro impianto alle nuove esigenze. Al fi ne di dare un servizio “chiavi in mano”, l’azienda offre anche servizi di progetta-zione, realizzazione lay-out, organizzazione del trasporto, montaggio, manutenzione, avviamento, formazione del personale e ricambistica. Sul fronte del rispetto ambienta-le l’azienda bolognese ha sempre prestato una particolare attenzione; ha infatti sviluppato sistemi improntati sullo sviluppo sostenibile in grado di garantire sia vantaggi eco-nomici sia un basso impatto sull’ecosistema. Tutte le confe-zionatrici Microline infatti utilizzano la bobina di fi lm al 100 %, senza creare rifi li o scarti di materiale, garantendo così un risparmio del materiale dell’ordine del 25/30 %, oltre a una conseguente riduzione del consumo elettrico per i di-spositivi di termo retrazione e all’eliminazione degli ulteriori costi di smaltimento dei materiale di scarto.

www.microlinesrl.it

MIcrOLINe, QUALITÀ, AFFIdABILITÀ e ASSISTeNZA POST VeNdITA

MICROLINE - CAT 2016 packaging.indd 1 20/01/16 17:42

High speed, great flexibility, excellent productivity.Our machines simply devour tins, jars, bottles and bags.

They will not stop until their task is complete, are reliable and efficient.

Whilst young, we are already expert players.We love to work side-by-side with our customers.

We thrive on challenges.

Play alongside us, together we can win the game.

conveyors - shrink-wraPPing machines - case-Packers - Palletisers

Microline s.r.l. Via Emilia 33/C - 40011 Anzola dell’Emilia (BO) Italy - ph. +39 051 6166696 - fax +39 051 6188252 - www.microlinesrl.it - [email protected]

Pack-MEN

WWW.MICROLINESRL.IT

Play with Us


42

FO

OD

&b

eVeR

ag

e Te

CHn

OLO

gY

Ca

TaLO

gU

e20

16 e

ditio

n


inTRaLOgiSTiC SYSTeMS FOOD&beVeRage TeCHnOLOgY

For companies in the construction material, chemical or food and beverage industries, the topic of

safety when transporting and storing palletised products has been beco-ming more important. This is what prompted BEU-MER to develop a new machine in its proven BEUMER stretch hood model range that o� ers even more prac-tical and safer handling for the user, compared with other machines in this model range.

To facilitate work for maintenance sta� , and thus en-sure higher machine availability, the new BEUMER stretch hood A is accessable without a platform and steps. Maintenance work, such as changing the bla-des, or the sealing bars, are now handled at � oor level.

The operator opens a drawer for these activities, pro-viding free access to blades and sealing bars. The machine is automatically brought to a standstill to protect the operator. This removes the need to move subassemblies to maintenance position. Due to this rapid access capability, maintenance work is accele-rated, and the risk of accidents and malfunctions mi-nimised.

The machine’s ergonomics have also been consisten-tly advanced. With just a few actions, and completely without tools, the operator can feed in the � lm. This means substantial reductions to tooling and conver-sion times.

Additional bene� ts include the compact design of the BEUMER stretch hood and the resulting low height and small footprint.

An innovative, material friendly � lm transport system feeds the previously created � lm hood into the sy-stem. On its way to the crimping and stretching unit, the sealing seam on the � lm hood cools down so that it can be crimped without loosing time.

This removes the need for an energy-intensive coo-ling unit and time-consuming cooling. The pallets can be packed in a shorter cycle time thus reducing idle times, while at the same time ensuring impro-ved packaging performance and less energy con-sumption.

The developers have also improved the human-machine interface to o� er an even more ergonomic

work� ow to the user. For this, the intra-logistics specialist has introduced the BEUMER Group Human Machine Inter-face (HMI), a newly-developed operator panel with an optimised user interface

and graphical navigation. This easily understandable and intuitive interaction concept helps to de� ne ef-� cient working sequences. The operator can control the machine safely with only a little training saving time and money, which ensures high economic e� -ciency.

The soft-touch panel uses pictograms to guide the user through the machine control menus. The panel also gives the operator access to all required training programs. The system is controlled by a Siemens SI-MATIC S7-300.

Energy-saving motors and low compressed air re-quirements ensure a favourable energy balance. The compressed air requirements have been signi� cantly reduced compared with the previous model.

With its U-shaped frame design, the BEUMER stretch hood can be easily connected to existing conveying systems. Removing the need to interrupt the con-veying system also guarantees smooth conveying performance for the pallets and stability of the palle-tised goods.

The BEUMER stretch hood can be equipped with the BEUMER OptiStretch system. The crimping bow, made of high-quality steel, swivels in even closer to the package, thus substantially improving the controlled application of � lm to the package.

This improves system availability and enhances the visual appearance. The palletised goods are clearly vi-sible through the smooth surface of the transparent, highly � exible � lm.

Film packaging protects the goods against atmo-spheric in� uences, water, dust and insects and tran-sport safety is substantially improved.

To be able to process various � lms, and implement a variety of packaging processes, such as understretch or high-rack stretch, the new system can be equipped with the BEUMER multistretch system.

www.beumergroup.com

BEuMER sTRETcH Hood a:sMallER, FasTER, MoRE PRacTIcal

BEUMER - CAT 2016.indd 1 10/12/15 11:36

SOME THINKPACKAGINGSYSTEMS TAKEA LOT OF SPACE.WE THINKDIFFERENT. At BEUMER, we like to start with something good andmake it better and better. Take our new transport packagingsystem BEUMER stretch hood® A. It’s surprisingly compact –only 13.7 m² – and combines our proven stretch hood processwith energy-saving motors. You get top performance from theimproved process technology and save on power costs, too. Fora new dimension in machine safety, operation and maintenance,switch to the innovation of BEUMER stretch hood® A.

For more information: www.beumergroup.com

StretchhoodA_steelplate_FoodProcessingKatalog_105x297mm_EN.indd 1 30.11.15 10:21

tech

no

log

yte

chn

olo

gy

tech

no

log

y

ADV 1/2 beumer.indd 3 01/03/16 17:23

44

FO

OD

&b

eVeR

ag

e Te

CHn

OLO

gY

Ca

TaLO

gU

e20

16 e

ditio

n


PReSeRVing FOOD&beVeRage TeCHnOLOgY

B ertuzzi Food Processing (Bertuzzi) was founded in 1936. The core activity of Bertuzzi has always been focussed on developing innovative techno-

logies for fruit and vegetable processing. Bertuzzi designs and supplies equipment, machines and complete plants to transform any type of vegetable and fruit into juices, concentrates, baby food, jams, ready made drinks and, in general, any fruit/vegetables base products.In particular Bertuzzi has developed a number of dedica-ted juice extractors for fruits like Citrus, Pineapple, Mango, Passion Fruit, Pomegranate in order to maximize the qua-lity of the product and the yield.Bertuzzi has supplied more than 1000 plants in over 100 countries.In 2010, Bertuzzi has been integrated into the Mazzoni LB Group moving its o� ce and workshop to the Mazzoni headquarters in Busto Arsizio.Mazzoni lB, founded in 1946, is the world leading com-pany in the design and supply of complete plants and ma-

chineries for the production of soap and glycerine with a market share exceeding 60%. Mazzoni LB is also active in Confectionery industry: mi-xers and extruders for chewing gum and equipment for liquorice industry. Mazzoni LB has supplied more than 2400 plants in over 130 countries.

Mazzoni lB acquired in 2012 a 40% share in Axor, the fa-stest growing Italian company in the design and supply of dry pasta and snacks.The Mazzoni LB Group has together with Axor and Ber-tuzzi an average turnover exceeding 70 million US$ with more than 130 employees with strong R&D, engineering and manufacturing capabilities and with a sales and tech-nical assistance network present in all the main world markets.

www.bertuzzi.it

BeRtUZZI, InnoVAtIVe technologIeS FoR FRUIt AnD VegetABle PRoceSSIng

B ertuzzi Food Processing è stata fondata nel 1936. L’attività principale di Bertuzzi è sempre stata foca-lizzata sulle tecnologie innovative per la lavorazione

di frutta e verdura. Bertuzzi progetta e fornisce attrezzature, macchine e impianti completi per trasformare qualsiasi tipo di verdura e frutta in succhi, concentrati, baby foods, marmel-late, bevande ready to drink e, in generale, qualsiasi tipo di prodotto base frutta/verdura. Bertuzzi ha sviluppato macchi-ne dedicate per l’estrazione di succo da frutti come gli Agru-mi, l’Ananas, il Mango, il Frutto della Passione, la Melagrana, al fi ne di massimizzare la qualità del prodotto e la resa. Ber-tuzzi ha fornito più di 1000 impianti in più di 100 paesi.Bertuzzi Food Processing è parte della Mazzoni LB Group. La sede e l’offi cina sono integrate nella sede moderna e fun-zionale Mazzoni a Busto Arsizio. Questa acquisizione ha rafforzato le attività di entrambe le società nella industria alimentare con il potenziamento della R & S, ingegnerizza-zione, produzione e le capacità commerciali con una rete di vendita presente in tutti i principali mercati mondiali.

Mazzoni LB, fondata nel 1946, è l’azienda leader nella pro-gettazione e fornitura di impianti completi e macchinari per la produzione di sapone e glicerina, con una quota di mercato superiore al 60% e un turnover di oltre 50 Milio-ni di US$. Mazzoni LB è attiva anche nel settore Dolciario: mescolatori ed estrusori per gomma da masticare e linee per la produzione di liquirizia . Mazzoni LB ha fornito oltre 2400 impianti in oltre 130 paesi.Mazzoni LB ha acquisito nel 2012 una quota del 40% in Axor, l’azienda italiana in più rapida crescita nella proget-tazione e fornitura di macchinari e impianti per la produ-zione di pasta secca e snack.Il Gruppo Mazzoni LB insieme ad Axor e Bertuzzi ha un fat-turato medio superiore a 70 milioni di dollari con oltre 130 dipendenti con una forte R & D, progettazione e capacità di produzione e con una rete di vendita e assistenza tecni-ca presente in tutti i principali mercati mondiali.

www.bertuzzi.it

BerTUZZI, TecNOLOGIe INNOVATIVe Per LA LAVOrAZIONe dI FrUTTA e VerdUrA

BERTUZZI - CAT 2016 tecnologie.indd 1 10/12/15 11:10

www.bertuzzi.it

BERTUZZI FOOD PROCESSING Srl, foundedin 1936, is one of the major world players in thedesign and supply of machines and completeplants to transform any type of vegetable and fruitinto juices, concentrates, baby food, jams, ready-made drinks etc.

BERTUZZI FOOD PROCESSING Srl, fondée en1936, est l'un des principaux acteurs mondiaux dans laconception et la fourniture de machines et d'installa-tions complètes pour la transformation de tout type devégétales et de fruits en jus, concentrés, aliments pourbébé, confitures, boissons prêtes à l'emploi, etc.

a company of MAZZONI LB


46

FO

OD

&b

eVeR

ag

e Te

CHn

OLO

gY

Ca

TaLO

gU

e20

16 e

ditio

n


PReSeRVing FOOD&beVeRage TeCHnOLOgY

o ur vision, our mission and phi-losophy of excellence. In a coun-try with food manufacturing

potentials, food manufacturing has to be set as one of the pillars of technological and economical progress. PIGO set a goal to become an initiating force in technological and consequently eco-nomical progress in food processing industry, a leader in country and in the world in manufacturing of food pro-cessing machines from its program.

Today, PIGO has established itself as a world-class leader in the design and manufacture of high technology freez-ing equipment and freeze dryers, as well as fruit and veg-etable processing equipment, with an extensive experi-ence in both freezing and fruit and vegetables processing.

PIGO machines are the result of many years of experience, research and development. PIGO can proudly say that its machines achieve excellent operating characteristics and energy e� ciency, while being user friendly, thus guaran-teeing many advantages and privileges to the company’s buyers.

PIGO has specialized in building � uidised bed freezers, EASY Freeze, the most suitable for IQF freezing variety of fruits, vegetables and numerous sea, meat and cheese products, rede� ning IQF Technology With Adaptable Air Flow.

Our EASY Freeze technology is providing perfect shape of IQF product and no clumps - Full controlled � uidisation method keeps the product constantly suspended above the belt in a cushion of air. The result is the immediate crust freezing and e� cient core freezing of individual pieces, regardless of type, variety or condition of product.Maximized freezing e� ciency for each unique product, whether the product is heavy, light, soft, sticky or fragile, thanks to Variable speed control of all fans and belts, al-lowing on-the-� y optimization of air � ow conditions.Internal video monitoring allows for real-time supervising of operating conditions, allowing the complete control and adjustments of the entire process from outside, with-

out necessity to entering into the freezer.EASY Freeze is considered as the freezer with the most superior sanitation, giving the possibility to user to freeze di� erent products one after the other without risk

of cross - contamination. EASY Freeze is ENERGY SAVING and TROUBLE FREE solution for all your freezing needs. Within the freezing equipment product line, PIGO also manufactures the innovative

EASY Freeze SPYRO, the latest generation of spiral freezers giving utmost advantages to the users in terms of energy e� ciency, hygienic conditions and advanced technologi-cal caracteristics. PIGO freezers are built in modular sizes and all compo-nents are made entirely of stainless steel, capable to pro-vide perfectly frozen product even for delicate products like cooked rice, raspberries, etc.PIGO also designs, fabricates and assembles sophisticated freeze dryers,

EASY Freeze DRYER – LYOPHILIZER .The freeze drying - dehydration technology allows to save delicate aromas while drying the frozen product under vacuum, producing premium quality product. Premium sensorial properties for � nished product, absolutely su-perimposable to those of the fresh product.

Machine execution is entirely in stainless steel (Chamber, doors, hinges, shelf modules, trays etc). Shelf modules and vapour condenser are contained inside chamber.Each unit is equipped with complete refrigeration plant.Besides EASY Freeze, EASY Freeze SPYRO, and EASY Freeze DRYER – LYOPHILIZER, one of the company’s main machines is automatic Pitting machine PG103 having at least 50-100% higher capacity than any other pitting ma-chine on the market.Experience of all PIGO’s clients con� rms work with 0,00% of remained stones when adequate quality and prepara-tion of the fruit (clean, calibrated product with adequate ripeness) is provided.

www.pigo.it

PIgo, oUR VISIon, oUR MISSIon AnD PhIloSoPhy oF eXcellence

PIGO - CAT 2016 tecnologie.indd 1 19/01/16 17:30

PIGO ADV FP 6-15.indd 3 18/11/15 14:24

48

FO

OD

&B

EVER

AG

E TE

CHN

OLO

GY

CA

TALO

GU

E20

16 e

ditio

n


PRESERVING FOOD&BEVERAGE TECHNOLOGY

T ecninox has been building machines for the food and beverage industry, as well as the pasteuriser for beer, and is willing to examine any customer’s

enquiry and request of supply. Tecninox plants and pas-teurisers for beer are built according to the latest manu-facturing technologies and are used for the beer heating processing and the pasteurisation lines in full bottles or cans. The strength of Tecninox is in heat treatment.

Tecninox builds single machines and complete lines. The Tecninox machines are built entirely of stainless steel and are made to the customers’ requirements. At the basis of the Tecninox work is the great production flexibility, com-bined with a high degree of professionalism in order to offer the most advanced technology in realising pasteur-isers for beer.

Information: main production range: Machines for food and beverage industry. Additional production range: Ma-chineries for tomato processing; machines for fruit pro-cessing; machines for jam processing; machine to process vegetables, mushrooms, vegetables with oil or vinegar pickle; pasteurisers for beer cooling tunnels for any type of container and product; pasteurisers tunnel coolers for beer and beverage; static sterilizers for any type of con-tainer and product; batch evaporators; cooking vessels; autoclaves; cutters; cooker for snails and other food prod-ucts, autoclaves, linear filling stations, linear filling stations by water rain, circular and volumetric fillers; Electrical and gas roasters for vegetables; Steamy and electrical concen-tration boule

www.tecninoximpiantialimentari.it

TecnInox, machInes for The food and beverage IndusTry

T ecninox costruisce macchine per l’industria alimen-tare e delle bevande, ed è disponibile a esaminare le necessità del cliente per preventivi ed eventuali

forniture. La forza di Tecninox è nel trattamento termico. Tecninox produce singole macchine e anche linee comple-te per la trasformazione della frutta e dei prodotti agricoli.

Le macchine di Tecninox sono completamente costruite in acciaio inox e vengono realizzate a seconda delle esigen-ze del cliente. Alla base del lavoro di Tecninox c’è senz’al-tro la grande flessibilità della produzione unita ad un alto grado di professionalità.

Gli impianti di Tecninox sono realizzati con l’utilizzo delle più moderne tecnologie di produzione e possono essere impiegati per le seguenti lavorazioni:- macchinari per la lavorazione del pomodoro;

- per la lavorazione della frutta;- per la produzione di marmellate;- per la lavorazione di verdure, funghi, sottolio, sottaceto;- pastorizzatori - raffreddatori a tunnel per ogni tipo di

contenitore e prodotto;- pastorizzatori - raffreddatori birra e bevande;- sterilizzatori statici per qualsiasi tipo di contenitore e

prodotto;- evaporatori a batch;- bacinelle di cottura;- autoclavi;- cutter;- pentola di cottura lumache e altri prodotti alimentari;- bolla di concentrazione a vapore e elettriche;- arrostitori elettrici e a gas per verdure.

www.tecninoximpiantialimentari.it

TECNINOX, MACCHINE su MIsurA PEr L’INDusTrIA ALIMENTArE E DELLE BEVANDE

TECNINOX - CAT 2016 tecnologie.indd 1 04/02/16 18:25

TECNINOX DI A.NAMAZIANO S.R.L. Via Costa ,27 - 43035 Felino, Parma - Italy - Tel: +39 0521804286

www.tecninoximpiantialimentari.it/ - [email protected]

Machineries to process tomato, fruit, jam, vegetables, mushrooms, vegetables with oil or vinegar pickle; pasteurisers - tunnel coolers for any type of container and product; pasteurisers - tunnel coolers for beer and beverage; static sterilizers for any type of containers and product; batch evaporators; cooking vessels.

GREAT FLEXIBILITY, HIGH PROFESSIONALISM

TECNINOX ADV A4_2016.indd 1 22/02/16 11:07

50

FO

OD

&B

EVER

AG

E TE

CHN

OLO

GY

CA

TALO

GU

E20

16 e

ditio

n


FRUIT PROCESSING MACHINERY FOOD&BEVERAGE TECHNOLOGY

T he roots of MORRONE FOOD TECH (M.F.T. srl) date back to 1946 when Mr Giulio Raiola, Maurizio Morrone’s grand-father, started manufacturing food-processing machin-

ery. During his first 40 years of activity, Giulio Raiola’s company establishes itself as leader manufacturer of processing equipment for the canning industry, namely tomato and peach processing. In the early 90’s Mr Raiola develops the first models of his peeler for apples, pears, citrus and kiwis, besides fruit cutters and other pieces of equipment that allow him to expand the company’s core business to the whole fruit-processing industry, including the then-emerging sector of fresh-cut fruit products.In 2009, Maurizio Morrone takes over his grandfather’s business and, besides developing the existing production range, he en-hances research and designing activities with the aim of applying his own and his staff’s know-how to vegetable processing as well. In so doing, the company won a large number of major customers in the vegetable canning industry: “From small concerns, which we support in achieving their growing aims by designing versatile and multipurpose solutions, to large companies, which challenge

us to keep developing equipment with ever-increasing productiv-ity”. THE RANGE: Always forwarding the fruit peelers and cutters flagship production range, M.F.T. is today a full range supplier of complete lines for fruit and vegetable processing, from infeed to packaging, with special expertise in the following sectors:• Fruit fresh-cut products• Fruit preserves• Jams and marmalades• Candied fruit• Fruit processing and preparation for freezing• Citrus essential oil extraction• Limoncello• Dried and dehydrated fruit• Vegetable preserves• Fruit juices and purees• Citrus juices• Tomato processing and canning.

www.mftitalia.com

MFT: Three generaTions oF experience in Food-processing

L a MORRONE FOOD TECH (M.F.T. srl) affonda le proprie radici nel 1946 quando Giulio Raiola, nonno materno di Maurizio Morrone, cominciò a costruire le prime macchi-

ne per la trasformazione di prodotti alimentari. Nei primi 40 anni di attività, Giulio Raiola si afferma come leader nella produzione di macchinari per l’industria conserviera ed in particolare per la trasformazione del pomodoro e per la produzione di pesche sciroppate. All’inizio degli anni ’90 sviluppa il primo modello di pelatrice per mele, pere, agrumi, kiwi, e successivamente taglie-rine e altre macchine che consentono di allargare il business aziendale a tutto il settore della trasformazione della frutta in ge-nerale, compreso il settore emergente della IV gamma. Nel 2009 Maurizio Morrone diventa titolare dell’attività iniziata dal nonno e, oltre a sviluppare le linee produttive già affermate, intensifica l’attività di ricerca e progettazione per applicare il know-how per-sonale e aziendale al settore della trasformazione della verdura allargando così la gamma di produzione e portando all’acquisi-zione di nuovi importanti clienti nel settore delle conserve vege-tali: “Dalle aziende più piccole, che supportiamo nel raggiungi-mento dei loro obiettivi di crescita progettando soluzioni versatili e polifunzionali, a quelle più grandi, insieme alle quali cogliamo

la sfida di sviluppare macchinari sempre più veloci e performanti”.LA GAMMA: Sempre privilegiando la linea di produzione delle pelatrici e taglierine per la frutta, che rappresenta il fiore all’oc-chiello della gamma aziendale, la M.F.T. è oggi in grado di for-nire una gamma completa di soluzioni per la trasformazione di frutta e verdura dalla ricezione al confezionamento con par-ticolare applicazione ai seguenti settori:• IV gamma di frutta• Conserve di frutta• Marmellate• Frutta candita• Preparazione di frutta per la surgelazione• Estrazione di essenze di agrumi• Limoncello• Frutta essiccata• Conserve vegetali• Puree e succhi di frutta • Succhi di agrumi• Trasformazione del pomodoro.

www.mftitalia.com

MFT: Tre generazioni di esperienza neL Food-processing

MFT - CAT 2016 tecnologie.indd 1 05/02/16 12:06

food technologies

to to to

to to to

for

pasteurize

to to to

to

and

to

MACHINES AND PROCESSING PLANTS FOR:

www.mftitalia.com

52

FO

OD

&B

EVER

AG

E TE

CHN

OLO

GY

CA

TALO

GU

E20

16 e

ditio

n


INDUSTRIAL DRYER FOOD&BEVERAGE TECHNOLOGY

D rying is the oldest system to pre-serve food. Open air drying using sun and wind has been practiced

since ancient times. Industrial equip-ments can ensure more consistent results speeding the process, improving quality and reducing costs. In addition to this dryers are used for the treatment of ad-ditives, essences, dyes, and in general all industrial products utilized in food pro-cessing. Given the breadth of the � eld of application, the type of machines is very variable and ranges from the little tunnel used by the farmer for local production of high quality dried food up to the big belt conveyor dryer or � uidized bed for the large scale food industry.

Tunnel dryers model LIBECCIO and GHIBLIThe process performed in the tunnel dryer is the closest system to the natural sun drying. Material to be dried is placed on trays and closed into an insulated “room” with controlled air � ow and temperature. Trays can be � xed or, usually, resting on wheeled carts. The drying time ranges from 6 to 48 hours according to the product. Size of the machine is de� ned by the useful drying surface and varies from 10 to 860 m2. Capacity depends on the product that can be loaded at a rate of 5-20 Kg per square meter.Substances to eliminate pests and melds can be added to the air � ow.This kind of dryers is used for fruit and vegetables.

Belt conveyor dryers model ETLThey are single or multiple belts dryers having from 5 up to 500 sq\m. useful surface, � tted with high e� ciency ventilation system and intermediate reheating of the dry-ing air if required. The dryer ETL is continuous, fully automatic equipment suitable for medium and large productions. It consists of one or more perforated strips on witch the product, load-ed with continuity, moves at a constant speed. The drying is produced by a stream of air passing through tape and product. Part of the circulating air is extracted by a fan and replaced by an equally amount of hot air. The entire system is divided into standard “zones” that di� er in the direction of the air � ow. Temperature, air � ow and relative

moisture of air are controlled by the auto-matic control system.

Fluidized bed dryers model TS, TS PULSE, and TSA The dryer consist of a cylindrical body (the diameter range from 0,4 to 5 meters and even more) that is divided in two parts by a special tray provided with patented shaped blades. They produce a lot of fast air’s blades such to hold in suspension the product alternated to as many zones of relative calm. The air � ow accelerated by

the drying tray blades surround and lifts the drying mate-rial creating the so called “� uidized bed”. A slow blender moves the whole mass in such a way that is homogene-ously invested by the air.

Filter bags are placed over the drying chamber to avoid dust pollution. The working principle is simple and is based on the exposition of the product to a direct hot air stream. The air in contact with the product gives it part of its internal energy. This causes the water evaporation and, at the same time, the reduction of air temperature.Material can be loaded batch wise (TS type) or continu-ously, and discharged batch wise (TS, TS PULSE) or con-tinuously.

Fast drying type Flash and Turbo� ash Some materials are sensible to the temperature. Such kind of materials can be dried with hot air but reducing the time of treatment to few minutes or seconds. In the “� ash” technique the air � ow carries and dries the product in a single and quick passage. In particular the turbo� ash realizes a swirl of hot air that lift and dry the product (usu-ally dust or little crystals, like � our or sugar, but in some circumstances also liquids).Constructively the TSF looks similar to TS family using the same patented drying tray to separate the inlet air cham-ber to the drying chamber.Di� erence is the speed of the process and the extraction system of exhaust air that allow adjusting the residence time of dust inside the dryer.

www.crsich.net

THE C.R.S.I. DRYERFOR FOOD INDUSTRY

SIE SWISS Service SA

TEL. : 0041 91 960 10 90

FAX : 0041 91 960 10 99

CRSI - CAT 2016 tecnologie.indd 1 18/01/16 16:24

Oso

C.R.S.I

Centro Ricerche Sviluppo Impianti SA SIE SWISS SA

SWISS RESEARCH & EGIEERIG Via Comunale 10 6807 Torricella-Taverne - Svizzera Tel.: +41 91 960 10 90 – Fax: +41 91 960 10 99 E-mail [email protected] - Sito: http://www.crsi.ch Sede legale: Via Industria, 7 - Cadempino (CH)

Località Signu – 6537 Grono - Svizzera Tel.: +41 91 210 36 77 – Fax: +41 91 960 10 99 E-mail: [email protected] Sito: http://www.sieswissservice.ch Sede legale: via la Cascata – 6547 Augio (CH) SIE: Società Italiana Essiccatoi dal 1896

ESSICCAZIONE DELLE TREBBIE DI BIRRA

Lo smaltimento degli scarti da lavorazioni agroindustriali costituisce un problema sia dal punto di vista economico che ecologico. Una soluzione alternativa allo smaltimento del prodotto fresco o essiccato suggerisce di usare gli scarti per generare energia. Il malto esausto ha, infatti, un potere calorifico di tutto rispetto, simile a quello del truciolo di legno di buona qualità (per dare un ordine di grandezza: 16700 Kj/Kg). Nell'impianto recentemente realizzato il combustibile alternativo serve per produrre vapore e, con i fumi esausti uscenti dalla caldaia, si realizza l'essiccazione del materiale umido, il quale, una volta essiccato, viene riciclato in caldaia. Il vapore serve allo stabilimento per il suo ciclo produttivo quindi dovrebbe comunque essere generato bruciando metano o gasolio.

Dal punto di vista del ciclo del carbonio il processo è largamente positivo. Infatti l'essiccazione avviene tutta attraverso fonti rinnovabili, e, se è vero che si richiede potenza elettrica, questa è largamente compensata dal risparmio di combustibile per la generazione del vapore, oltre che dall'eliminazione del trasporto su strada dei cascami.

MODELLO ALFA Quest'ultimo aspetto ha ovviamente un suo impatto ambientale per niente trascurabile, per tacere delle complicazioni economiche e logistiche che comporta. Naturalmente per ottenere questo risultato è necessario un impianto di essiccazione fatto apposta per ridurre al minimo i consumi energetici e gli oneri di manutenzione.

MODELLO TS MODELLO TSF LETTO FLUIDO LETTO TURBOLENTO CONTINUO


54

FO

OD

&B

EVER

AG

E TE

CHN

OLO

GY

CA

TALO

GU

E20

16 e

ditio

n


FOOD TECHNOLOGY FOOD&BEVERAGE TECHNOLOGY

s ince 1961, I.C.F. & Welko S.p.A., an Italian company based in the mechanical-engineering district of Maranello, has been planning, manufacturing and

installing plants, machines and equipment worldwide for food, chemical, pharmaceutical and agro industries. I.C.F. & Welko S.p.A. provides cutting-edge solutions for spray dry-ing, � uidized bed drying, freezedrying, evaporation, extrac-tion, aroma recovery, agglomeration; hundreds of our cus-tomers successfully process a wide range of products with I.C.F. & Welko S.p.A. complete “turn-key” plants, such as dairy products, co� ee, breakfast and beverages (chocolate bever-ages, co� ee extracts and surrogates, instant co� ee, cappuc-cino, tea, herb teas, broths, soups, etc.).

Each plant is tailormade to the customer’s requirements and provides outstanding performance, high automation levels, great � exibility and energy saving, in total compliance with the highest safety, security and environmental standards. I.C.F. & Welko S.p.A. has always been strongly committed to Researching and developing new technological solutions to

cater to constantly-changing industry needs; our company knows that challenges are strategic opportunities and of-fers itself as the partner for your innovation, meaning a key partner for your success. Our company has an innovated and fully equipped research-testing laboratory, which allows our customers to:• simulate and test product behavior under processing con-

ditions,• make the proper plant, machine and equipment choices,• fully understand product treatment characteristics,• identify process variables and necessary dimensioning

and planning elements,• provide technological assistance for new solutions.

Our R&D lab is sta� ed by the most experienced and trained personnel available, whose work consists in ongoing re-search aimed at continuous upgrading and the increasingly better satisfaction of customers and stakeholders.

www.icfwplants.com

Icf&WeLKo, ParTner for InnovaTIonfor food IndusTrIes

I.C.F. & Welko S.p.A., azienda italiana nel distretto mecca-nico di Maranello, dal 1961 pianifi ca, produce ed instal-la impianti, macchine e attrezzature in tutto il mondo

per l’industria alimentare, chimica, farmaceutica ed agroali-mentare. I.C.F. & Welko S.p.A. fornisce soluzioni avanzate per l’essiccazione a spruzzo, essiccazione a letto fl uido, liofi lizza-zione, evaporazione, estrazione, recupero aroma, l’agglome-razione; centinaia di nostri clienti lavorano con successo una vasta gamma di prodotti grazie ad impianti completi chiavi in mano ICF & Welko SpA, quali lattiero caseari, caffè, cola-zione e bevande (bevande al cioccolato, estratti di caffè e sur-rogati, caffè solubile, cappuccino, tè, tisane, brodi, minestre, ecc.). Ogni impianto è progettato su misura delle esigenze del cliente e garantisce prestazioni eccellenti, elevato livello di automazione, grande fl essibilità, risparmio energetico, nel pieno rispetto dei più elevati requisiti di sicurezza, sicurezza e ambiente. I.C.F. & Welko S.p.A. è da sempre seriamente im-pegnata nella ricerca di soluzioni tecnologiche nuove e in via di sviluppo per le continue esigenze dell’industria; la nostra

società è consapevole che le sfi de sono opportunità strate-giche e si propone come partner per la vostra innovazione, che signifi ca partner chiave per il vostro successo. La nostra azienda dispone di un innovato e completamente attrezzato laboratorio di ricerca-test, che permette ai nostri clienti di:• simulare e testare il comportamento del prodotto in condi-

zioni di lavorazione• fare la scelta corretta per impianti, macchine e attrezzature,• comprendere a fondo le caratteristiche di trattamento del prodotto,• individuare le variabili di processo e gli elementi necessari

per il dimensionamento e la pianifi cazione,• fornire assistenza tecnologica per nuove soluzioni.

Il nostro laboratorio R&D è composto dal personale più esperto e addestrato a disposizione, il cui lavoro è la ricerca continua per il miglioramento continuo e la soddisfazione di clienti e stakeholders.

www.icfwplants.com

ICF & WELKO, PArTNEr PEr L’INNOVAZIONE NELL’INDusTrIA ALIMENTArE

ICF & WELCO CAT 2016.indd 1 21/01/16 09:56

210X297_ICF.indd 2 17/07/12 10.54INGOMBRO ADV.indd 3 03/04/15 16:54

56

FO

OD

&B

EVER

AG

E TE

CHN

OLO

GY

CA

TALO

GU

E20

16 e

ditio

n


BLADES FOOD&BEVERAGE TECHNOLOGY

C hiaravalli Group S.p.A. is a leading company in the production of blades for slicing machines, with state of the art technology and a warehouse with over 250,000

finished parts, in order to satisfy immediately the needs of the customers. Our company is the result of great passion and con-sistent investment of energies on entrepreneurial projects, for the creation of a wide range of extremely high quality products, 100% made in Italy, able to meet the requirements of a more and more demanding market, in constant evolution. Chiaraval-li Group S.p.A. brings together the great level of know-how of the historic German trademark RASSPE, consistently the most important manufacturer of blades for slicing machines for over a century, and the thirty year experience of their own person-nel, together with the advanced technological features of the machines used to complete each production stage. With our historic trademarks: RASSPE BLADES and KLINGER, we have been able to secure a strong presence in all the world markets.

The winning solution for every cutSlicing machines are used to cut an incredible range of prod-ucts nowadays, the following optionals will always lead you

to perfection: THIRD GENERATION patented technologyThanks to a profile structured on two different levels, the blade’s surface in contact with the product is reduced to the minimum preventing pointless frictions, infact: • avoids the waste that is normal with traditional blades; • enables to obtain extremely thin and perfect slices; • the flavour of the product is unchanged because does not

become hot.

Especially recommended to cut: cheese, boiled meats, soft ham and vegetables.

SAW TOOTHING: Particularly suited for bread cutting, but most of all for frozen meat and fish. These blades can be sharpened as normal, using the sharpening tool provided with the slicing machine.

TEFLON COATING: ensure the blade better sliding properties when in contact with the product, very useful for cheese cutting.

www.rasspe.it - www.chiaravalli.com

CHIARAVALLI GROUP, STATE OF THE ART CUTTING TECHNOLOGY

C HIARAVALLI GROUP SpA è una realtà industriale lea-der nella produzione di lame per affettatrici con un’u-nità produttiva tecnologicamente all’avanguardia e un

magazzino di oltre 250.000 pezzi finiti, disponibili per soddisfare immediatamente le richieste della clientela. La nostra azienda è il risultato di grande passione ed energie investite in termini di inventiva imprenditoriale nella creazione di una vasta gamma di prodotti di altissima qualità, 100% made in Italy, finalizzati a soddisfare le richieste di un mercato sempre più esigente ed in perenne movimento. CHIARAVALLI GROUP SpA fonde il gran-de know-how dello storico marchio tedesco RASSPE BLADES, primo costruttore in assoluto di lame per affettatrici da oltre un secolo con l’esperienza trentennale del proprio personale e l’avanzata tecnologia dei macchinari impiegati in ogni pro-cesso produttivo. CHIARAVALLI GROUP SpA è presente in tutti i mercati mondiali con i propri marchi storici: RASSPE BLADES e KLINGER.

La soluzione vincente per ogni taglioLe affettatrici vengono oggi impiegate nel taglio di una notevo-

le varietà di prodotti, le seguenti finiture, applicabili alle nostre lame Vi condurranno sempre al risultato perfetto: TERZA GE-NERAZIONE tecnologia brevettata.Grazie ad un profilo di taglio strutturato su due livelli, la porzio-ne di lama in contatto con il prodotto viene ridotta al minimo prevenendo inutili attriti, infatti:• evita i consueti sprechi delle lame tradizionali;• permette il taglio di fette sottilissime e perfette;• il sapore del prodotto rimane inalterato perché non si riscalda.

Specialmente raccomandata per affettare: formaggio, carne bollita, salumi morbidi e verdure.

SEGHETTATURA: Particolarmente adatta al taglio del pane, ma soprattutto della carne e del pesce surgelati;

TEFLONATURA: Rivestimento che conferisce alla lama notevoli proprietà antiaderenti, consigliato per il taglio dei formaggi.

www.rasspe.it - www.chiaravalli.com

ChIARAvAllI GROup, l’AlTA TECNOlOGIA DEl TAGlIO

CHIARAVALLI - CAT 2016 tecnologie.indd 1 04/03/16 15:55


58

P ND’s ambitious goals for the fu-ture foresee constant growth, thanks to new products and to

new markets. PND srl, founded in 2000, in its 15 years of activity has become an international reference for fruit processing, delivering innovative solutions to serve Fresh Cut companies, in addition to the established preserved, frozen and dehy-drated ones.

In PND range of product you can fi nd peeling, coring and cutting machines for apples, pears, kiwi, oranges, pineapples, melons, strawberry, mangos with manual or automatic feeder, prewashing tank and treatment tank.

The presence in the main world markets has brought the Italian company to export 90% of its production, with more than 500 units between machinery at manu-al feeding and automatic plants, thanks also to the an-nual presence in over 10 fi eld exhibitions.

PND exports its machines all around the world thanks to a commercial network that has spread out worldwide.

The plant is located close to Salerno, in the green vil-lage of Scafati; its south geographical position did not stop to develop a partnership with diff erent suppliers specialized in machinery components, gaining a Made in Italy “High Quality”.

The aim for the next years is ambitious with a previ-sion of constant growth, thanks to new products and to new markets on which the company is working with care. Thanks to the constant research, that allows a con-tinuous technological evolution, and to the high coop-eration with its own clients, PND srl develops each year new ideas and solutions.

The newborn in the family PND is the strawberry deca-lyx machine Mod. DF12, upgraded on fi eld during all the 2015 and ready for processing in 2016. Not missing a shot, the decalyx machine reaches a production of high standard: up to 300 strawberries per minutes. According

to client’s request, the machine is able to cut in half and in four pieces as well. Proud of achieving a high performance of this new creation, being under the minimum of waste and giving a quality

product with the guarantee of always, with the sim-plicity that distinguishes them for years. Best seller in Mexico, much requested in the States and checked in the European walls, it will be the most manufactured machine in this next 2016.

Side by side of this jewel, you can fi nd the performing mango line, composed of three machines able to peel, de-stone and cut in wedges and chunks. Also well sold and easy to use, it is already for two years on the market and responds well to customer’s needs, as it is the only machine that allows to fully manage fruit in its diff erent sizes, varieties, and ripeness.

Always interesting for many advantages is melon and pineapple line, for many years in the markets and still the fi rst choice for many companies that expect the maximum in simplicity and versatility by processing. Extremely safe even if its feeding room is opened, it is available in two models according to the capacity re-quested.

These industrial machines, all manufactured in stainless steel and easy for maintenance, strike for its robustness, compactness, reliability, and simplicity in the same time. Designed for prolonged processing, up to 24H no stop, PND machinery like especially to technicians that notice immediately minimum service to do on them.

The most appreciated skill of PND team is the smart and quick answer to all needs of the market, a complete at-titude to welcome the customer before and after sale, a transparency and openness also in technical advice for tailored solutions. The customer feels comfortable, wel-comed, understood and satisfi ed.

For more info we invite you to visit our website www.pndsrl.it or to write at [email protected].

FO

OD

&B

EVER

AG

E TE

CHN

OLO

GY

CA

TALO

GU

E20

16 e

ditio

n


FRUIT PROCESSING MACHINERY FOOD&BEVERAGE TECHNOLOGY

CONTINUOUS TECHNOLOGICAL EVOLUTION

PND - CAT 2016 tecnologie.indd 1 15/12/15 14:39

Linea Melone/AnanasPineapple/Melon Line

Linea MeleApple Line

Depicciolatrice per fragoleStrawberry decalyx machine

Linea MangoMango Line

60

FO

OD

&B

EVER

AG

E TE

CHN

OLO

GY

CA

TALO

GU

E20

16 e

ditio

n


TOMATO LINES FOOD&BEVERAGE TECHNOLOGY

T he company Navatta, founded by Mr. Giuseppe Navatta in 1983, produces and installs fruit and

vegetable processing lines and boasts references across the globe.

Navatta Group is also centre of excellence for the pro-duction and installation of processing machines and plants for peeled tomato and tomato by-products; it counts many references all over the world, with capaci-ty ranging from 20 to 120 t/h of incoming fresh product.

Navatta Group is today a well - established and technologically efficient reality, also thanks to the numerous companies’ acquisitions over the years, such as Dall’Argine e Ghiretti in 2001, a 40-year-old company world famous for rotary can pasteurizers and tomato pulping lines; Mova, in 2010, with exten-sive experience in bins handling, bins and drums emptying, palletizers and de-palletizers, washing systems; Metro International, in 2012, leader in fruit and vegetables processing, boasting international patents for juice and puree extraction, concentra-tion plants and thermal treatment; Ghizzoni Etto-re, in 2012, specialized in special batch plants for ketchup, sauces and jams.

Manufacturing rangeNAVATTA GROUP manufactures and commissions Pro-cessing Lines, Systems, Equipment for Fruit, Tomato, Ve-getables for:

• peeled/diced/crushed tomatoes, tomato sauces and purees, tomato paste, all � lled into any kind of packa-ge or in aseptic;

• diced, puree, juices (single strength or concentrated) from Mediterranean/tropical fruit, all � lled into any kind of package or in aseptic;

• fruit de-frozing lines from IQF, blocks and drums;

• high yield PATENTED fruit puree cold extraction, fruit purees/juices equalized in aseptic;

• wide range of evaporators to produce tomato paste Mediterranean and tropical fruit con-centrate;

• evaporators for coff ee and milk: evaporation before spray atomizers, freeze dryers or other dryers;

• evaporators for cogeneration industry (waste treatment);

• aseptic sterilizers;

• aseptic fi llers for spout bags/ spout-less Bag-in-Box 3 - 20 liters, Bag-in-Drum 220 liters, Bin-in-Box/IBCs 1.000 - 1.500 liters;

• formulated products productions (jam, ketchup, sau-ces, drinks) starting from components unloading to dosing, mixing, mechanical/ thermal stabilizing, to � lling into any kind of package or into aseptic mini-tanks;

• processing pilot plants;• vegetable processing as receiving, rehydration, coo-

king, grilling and freezing.

Navatta Group’s headquarter and the two production units are located in Pilastro di Langhirano, Parma, with a total production area of 10,000 square meters.

Vision Passion is the factor that drives us to higher targets, in terms of technology, products and services.

MissionTo constantly increase Customers’ satisfaction and fi delity.

www.navattagroup.com

NAVATTA GROUP, FRUIT AND VEGETABLE PROCESSING LINES

NAVATTA CAT 2016.indd 1 10/12/15 11:28

JUICE ASEPTIC STERILIZER ROTARY CANS STERILIZER - COOLER

DOUBLE HEAD ASEPTIC FILLER FOR PALLETIZED DRUMS 220 LT AND BAG IN BIN 1000-1500 LT

WEB-DRUM AUTOMATIC FILLER & CASE PACKERWEB:3-20 LT/DRUM: 220 LT

HOT BREAK AND EVAPORATOR

CONSTANTLY INCREASING CLIENTS’LEVEL OF SATISFACTION AND FIDELITY

AUTOMATIC SAUCE-JAM-CONFITURE PREPARATION LINE

CONSTANTLY INCREASING CLIENTS’LEVEL OF SATISFACTION AND FIDELITY

Navatta Group applies state-of-the-art technology to the manufacturing of machinery for the food processing industries, achieving simple effective results. It guarantees a highly professional pre-and post-sales services, thanks to the expertise of its people: human face technology.

NAVATTA GROUP food processing srlVia Sandro Pertini, 7 • 43010 Pilastro di Langhirano • Parma (PR)

tel 0521 630322 • fax 0521 639093

www.navattagroup.com

Proge

tto g

rafic

o:

NAVATTA ADV CAT 2016.indd 3 09/12/15 11:30

62

FO

OD

&B

EVER

AG

E TE

CHN

OLO

GY

CA

TALO

GU

E20

16 e

ditio

n


OIL TECHNOLOGIES FOOD&BEVERAGE TECHNOLOGY

T he passion for innovation has always been the driv-ing force behind the Pieralisi Group. This is just as true today as at the outset when Adeodato Pieralisi

set up his fi rst workshop in the small town of Monsano in 1888, the start of this family-run manufacturing business.From the post-war period onwards, the Group’s main plant in Jesi has specialized in olive oil machinery and what was once a family-run manufacturing business be-came an industrial enterprise with a solid organization.

In the 1960’s, Pieralisi revolutionized traditional olive oil extraction systems, conquering domestic and interna-tional markets with the fi rst decanter for olive-oil continu-ous processing. Starting in the 1970’s, Pieralisi moved into new sectors of the market.The Group’s large experience and know-how in the olive oil sector led Pieralisi to off er centrifugal force as a rational solution to production processes in a wide range of food-processing and industrial sectors. The Group’s success

was so rapid that, in just a few years, it established itself as the world’s leader company in centrifugation. The key to Pieralisi’s success in the olive oil sector is the continual testing of innovative high-tech solutions aimed at increas-ing customers’ olive oil yield and quality. This commitment dates back to Pieralisi’s introduction of the fi rst continu-ous-processing decanter that revolutionized the olive oil extraction process. Still today the Group provides the olive oil extraction industry with modern plants that are auto-matically able to handle all processing stages and to keep track of all data for complete traceability of the product.In 2012 Pieralisi revolutions once again olive oil sector by introducing LEOPARD, the only centrifugal extractor with DMF technology (Multiphase Decanter) which represents the solution of the third era for olive oil extraction, turn-ing a by-product to be disposed of into added value for the miller.

www.pieralisi.com

PIERALISI GROUP

l a passione per l’innovazione guida il cammino del Gruppo Pieralisi fi n dalle sue origini, quando Adeoda-to Pieralisi, nel 1888, fonda nel piccolo borgo di Mon-

sano la prima offi cina dando vita ad una realtà produttiva a carattere familiare. Dal secondo dopoguerra, nella sede principale di Jesi, l’atti-vità si indirizza e specializza verso la produzione delle prime macchine olearie, e quello che era sistema produttivo a ca-rattere familiare diviene una solida organizzazione di tipo industriale su ampia scala. Negli anni ’60 la Pieralisi rivoluziona i sistemi tradizionali di estrazione dell’olio d’oliva e conquista i mercati nazionali e internazionali introducendo il primo decanter per la lavora-zione in continuo delle olive. A partire dagli anni ‘70 la Pieralisi individua nuovi mercati. L’esperienza e l’elevato know-how acquisiti nel settore olea-rio spingono il Gruppo ad offrire la forza centrifuga come so-luzione razionale ai processi produttivi dei più diversi settori agro-alimentari e industriali, tanto da divenire in pochi anni

leader mondiale nella centrifugazione. Alla base del succes-so della Pieralisi nel mercato oleario sta la sperimentazione di soluzioni tecnologiche sempre nuove che consentono ai clienti di migliorare costantemente il rendimento dell’oliva e la qualità del proprio olio. Un impegno che inizia quando la Pieralisi introduce il primo decanter per la lavorazione in continuo delle olive, rivoluzionando il processo dell’estrazio-ne dell’olio, e che porta avanti ancora oggi offrendo ai fran-toiani di tutto il mondo impianti evoluti, capaci di governare automaticamente le varie fasi di lavorazione e di gestire i dati ai fi ni della tracciabilità del prodotto.Nel 2012 il Gruppo Pieralisi rivoluziona ancora una volta il settore oleario introducendo LEOPARD, l’unico estrattore centrifugo con tecnologia DMF (Decanter Multifase) che rappresenta la soluzione tecnologica della terza era per l’e-strazione dell’olio d’oliva, trasformando quello che era uno scarto da smaltire in valore aggiunto per il frantoiano.

www.pieralisi.com

GRuppO pIERAlISI

PIERALISI - CAT 2016 tecnologie.indd 1 13/01/16 12:48

ABBIAMO L’ULIVO NEL CUORE.DA SEMPRE

Via Don Battistoni, 1 60035 JESI An Tel. +39.0731.2311 Fax +39.0731.231239 [email protected] www.pieralisi.com

I N N O V A T O R I P E R P A S S I O N E

comun

icazione.it

comun

icazione.it

comun

icazione.it

GP OIL I/GB/F/ES A4.indd 1 21/11/11 12.42

64

FO

OD

&B

EVER

AG

E TE

CHN

OLO

GY

CA

TALO

GU

E20

16 e

ditio

n


HOMOGENIZERS FOOD&BEVERAGE TECHNOLOGY

O n-going innovation, exacting ex-perimentation of special materials and strict quality controls allow

FBF ITALIA to guarantee maximum perfor-mance, durability, reliability and safety

FBF Italia has designed and manufactured since 1987, high pressure homogenizers, positive displacement pumps, laboratory homogenizers, dosing systems and, thanks to the wide experience gained in this fi eld, is now a key point-of-reference for plants manufacturers, suppliers of turn-key equipment and end-users in the food, chemi-cal and pharmaceutical sectors.

On-going innovation, exacting experimentation of spe-cial materials, strict quality controls and endurance tests allow FBF Italia to guarantee maximum performance, durability, reliability and safety; its mission is to off er to all its customers not only excellent sale services but also continuous relationship with constant, direct post- sale technical assistance; the target is to keep friendly relation-ship built on mutual evolution and innovation. FBF Italia’s machines are suitable to process a lot of products and can be inserted into complete process/ production, both in sanitary and aseptic design.

The main utilization fi elds of the company machineries are:• dairy industries (milk, cream, cheese, yoghurt, casein-

ates, proteins, soya milk, etc.);• ice-cream industries;• food, processing, preserving and beverage industries

(fruit juices, tomato sauces, oil, ketchup, eggs, vegeta-ble greases, emulsions, concentrates, baby food, etc.);

• cosmetic, pharmaceutical, chemical and petrol-chemi-cal industries (starch, cellulose, wax, colorants, beauty creams, tooth paste, detergents, disinfectants, emul-sions, inks, latex, lotions, emulsifi ers oils, pigments, pro-teins, resins, vitamins, etc.).

But what about the homogenizing principle? In order to permanently mix one or more substances in a liquid, a ho-mogenizer must be used in such a way as to make it pos-sible to micronize and disperse the suspended particles in the fl uid, rendering it highly stable even during succes-sive treatments and storage.

The product reaches the homogenizing valve at a low speed and at high pressure. As it passes through the valve, it is subject to various forces that cause the micronization of the particles: violent acceleration followed by immedi-ate deceleration causes cavitation with explosion of the

globules, intense turbulence together with high-frequency vibrations, impact deriv-ing from the laminar passage between the homogenizing valve surfaces and conse-quent collision with impact ring.

Homogenization can occur with the use of a single stage homogenizing valve (suitable for dispersion treatment), or double stage homogenizing valve (recommended for use with emulsions and for viscosity control when re-quested).

FBF Italia’s range of machines can be commonly classifi ed as follows:• high pressure homogenizers: The homogenizer is of-

ten necessary to mix one or more substances within a liquid. This machine allows micronizing and scat-tering the particles suspended in the fl uid, so that the product becomes highly stable, no matter the followings treatments and storage the product may undergo.

The “Buff alo Series” homogenizers are manufac-tured according to the UE directives and are avail-able with capacity ranging from 50 up to 50.000 litres/hour; according to the products to be pro-cessed, the requested pressure may vary up to 2.000 bars (29.000 psi),

• positive displacement pumps: these pumps are used to transfer the products from a storage system or process one to a further part of the plant at a high pressure. These machines are commonly used for feeding of spray driers, tomato paste plants, osmosis plants, etc.

• laboratory homogenizers: manufactured to replicate the same homogenization conditions that can be ex-pected in a real production process these machines off er the possibility to execute tests up to very high pressure (1500 bar) and do not need of any other device to work. Easy to use and to move, with the highest reliability, is the best choice for keeping the production always under control,

• positive displacement pumps for product containing particles: these pumps are mainly used for product containing particles with a max. sizes of 15x15x15 mm such as tomato cubes, vegetable or fruit piec-es. The construction of such a machine is much the same as the homogenizers, except for the compres-sion head which is equipped with special pneumati-cally controlled valve groups.

www.fb� talia.it/website

FBF ITALIA’S QUALITY IN THE WORLD

FBF CAT 2016.indd 1 28/01/16 10:25

mmmmmmmooooooogggggeeeeeenniizzeeeerrss

A complete range to suit a wide variety of applications and products

We will be present at the We will be present at the We will be present at the We will be present at the We will be present at the We will be present at the We will be present at the We will be present at the We will be present at the following exhibitions:following exhibitions:following exhibitions:following exhibitions:following exhibitions:

FBF Italia S.r.l.Via Are, 2 43038 Sala Baganza (Parma) ItalyPhone: + 39 0521 548200Fax: +39 0521 835179www.fbfitalia.it - [email protected]

www.fbfitalia.it

INSTALLEDMACHINES1987 - 2015

OVER

HHHHHHH.PPPPP.P.PP.PHHHHHHooommmmm

A complete range to suit A complete range to suit A complete range to suit a wide variety of a wide variety of A complete range to suit a wide variety of A complete range to suit

applications and productsapplications and productsa wide variety of applications and productsa wide variety of a wide variety of applications and productsa wide variety of

We will be present at the following exhibitions:following exhibitions:

WHAT WE DO BEST ARE HIGH PRESSURE HOMOGENISERS & PISTON PUMPS. We’ve already done it more than 3500 times and we will continue to do it better and better.

BTABarcelona, 21-24 April 2015Barcelona, 21-24 April 2015Barcelona, 21-24 April 2015Barcelona, 21-24 April 2015Barcelona, 21-24 April 2015Barcelona, 21-24 April 2015Barcelona, 21-24 April 2015STAND P5 C124STAND P5 C124STAND P5 C124STAND P5 C124STAND P5 C124STAND P5 C124STAND P5 C124

PROPAK ASIA 2015Bangkok, 17-20 June 2015Bangkok, 17-20 June 2015

Pagina fiere 22x29cm_002.indd 1Pagina fiere 22x29cm_002.indd 1Pagina fiere 22x29cm_002.indd 1Pagina fiere 22x29cm_002.indd 1Pagina fiere 22x29cm_002.indd 1Pagina fiere 22x29cm_002.indd 1Pagina fiere 22x29cm_002.indd 1Pagina fiere 22x29cm_002.indd 1Pagina fiere 22x29cm_002.indd 1Pagina fiere 22x29cm_002.indd 1Pagina fiere 22x29cm_002.indd 1Pagina fiere 22x29cm_002.indd 1Pagina fiere 22x29cm_002.indd 1Pagina fiere 22x29cm_002.indd 1Pagina fiere 22x29cm_002.indd 1Pagina fiere 22x29cm_002.indd 1Pagina fiere 22x29cm_002.indd 1Pagina fiere 22x29cm_002.indd 1Pagina fiere 22x29cm_002.indd 1Pagina fiere 22x29cm_002.indd 1Pagina fiere 22x29cm_002.indd 1Pagina fiere 22x29cm_002.indd 1Pagina fiere 22x29cm_002.indd 1Pagina fiere 22x29cm_002.indd 1Pagina fiere 22x29cm_002.indd 1Pagina fiere 22x29cm_002.indd 1Pagina fiere 22x29cm_002.indd 1Pagina fiere 22x29cm_002.indd 1Pagina fiere 22x29cm_002.indd 1Pagina fiere 22x29cm_002.indd 1 08/04/15 15:3708/04/15 15:3708/04/15 15:3708/04/15 15:3708/04/15 15:3708/04/15 15:3708/04/15 15:3708/04/15 15:3708/04/15 15:3708/04/15 15:3708/04/15 15:3708/04/15 15:3708/04/15 15:3708/04/15 15:3708/04/15 15:37

Adv A4 FBF - FP 6-15.indd 3 22/12/15 17:01

66

FO

OD

&B

EVER

AG

E TE

CHN

OLO

GY

CA

TALO

GU

E20

16 e

ditio

n


Homogenizers FooD&BeVerAge TeCHnoLogY

G EA is the technological leader for dynamic high pressure homoge-nizers and plungers pump for all

industries and applications. This is the re-sult of specific know-how and a spirit of innovation that is constantly focused on innovation and process performances. Thanks to a strategy of develop-ment of both established and potential applications of-ten based on cooperation with our customers’ Research and Development Centers, GEA can offer highly specific and customized process solutions to always meet, ensure and repeat over time product quality excellence.

The latest set-up and continuous improvements on pro-duction technologies allow the company to offer a com-plete range of homogenizers from laboratory up to mass industrial sizes. The most important key of success consists in the close collaboration with customers to implement innovative and tailor-made solutions to maintain continu-ous product development and to guarantee efficient op-erations and excellent results on the final products.

The Laboratory and Innovation Centre, based in Parma (Italy) next to the production plant, is a unique resource available to test homogenization technology, refine re-ceipts, develop high efficiency homogenizing valves and evaluate the performance of installed machines. Highly qualified staff can support customers in the de-velopment of new products, to test maximum process efficiency conditions and product scalability to industrial production processes.

The benefit of high pressure homogenization is well known in dairy, food & beverage, to subdivide parti-cles or droplets present in fluids to reduce them to the smallest possible size, down to nanometer range. Thus, the process creates a stable emulsion, which improves the product shelf life, viscosity, colour, taste and conse-quently its performance. In addition, the use of high dy-namic pressure and homogenizing valves designed and sized based on different applications allows particles to be subdivided at the required micronization and ingre-dients to be well mixed at the lowest possible pressure.

The company is a highly respected supplier of homog-enizers meeting stringent hygienic requirements and quality control systems. All machines are CIP and SIP’able

and are available with cGMP documenta-tion. GEA offers its clients a full range of homogenizers with an unmatched scope of supply. Ariete Series homogenizers are the state-of-the-art technology for power-

ful, reliability and customized solutions. Each machine is internal manufacturing of all core components, for total quality control and in order to guarantee an high number of customized solutions and full traceability of parts, us-ing the best materials and premium brand components.The homogenizing pressure can reach 1500 bar depend-ing on specific liquid end design and configuration.

The main features are the following:• Easy to use.• Highest reliability on continuous production (24/7).• Reduced operational costs (water, lubrication oil, en-

ergy).• Low environmental impact.• Fully automated and remote controlled.• High capacity at ultra-high pressure.

One Series is an ideal homogenizer for dairy products and beverages, such as: pasteurized flavoured milk, cream, milk for yogurt, cheese, yogurt drinks, dressings, fruit juice and drinks.

One homogenizers combine convenience and absolute quality to deliver unmatched benefits: 1. Simple: One offers a simple design construction, com-

plete with all the options needed to be easily integrat-ed into the system, as ready-to-use and low mainte-nance units.

2. Versatile: available in five versions, One homogeniz-ers can meet any production need (from 300 l/h up to 10.000 l/h - 250 bar).

3. Reliable: constant engineering improvement, excel-lent quality standard of production and the compe-tence of personnel are the winning drivers to guaran-tee long lasting machine.

GEA is able to offer customized solutions for all applica-tions field and the optimized design of the homogeniz-ing valve can guarantee energy and cost savings.Please, see more information here. (www.gea.com)

GEA, complEtE rAnGE of homoGEnizErs

GEA CAT 2016.indd 1 03/03/16 13:15

GEA High pressurehomogenization

Choose all the advantages of a leading process:Longer shelf-life, better overall product performance, improved taste and nutritional values


68

FO

OD

&B

EVER

AG

E TE

CHN

OLO

GY

CA

TALO

GU

E20

16 e

ditio

n


OZONE GENERATOR TECHNOLOGIES FOOD&BEVERAGE TECHNOLOGY

T hanks to the growing need to protect our ecosys-tem and environment, the Food & Beverage indus-try is always more interested in low impact tech-

nologies. That’s why De Nora proposes to Food&Beverage industry its ozone systems for the sanitization of environ-ments and equipment and to for process water and waste water treatments.

With its De Nora Next ozone systems, De Nora fulfill these needs, promoting the usage of ozone as a complement or as a green alternative to chemical products that are com-monly used in the sanitization and in the protection from pathogens in F&B applications such as: • drinking water bottling;• sanitization of barriques and tonneau• process water and waste water treatment • post-harvest and storage sanitization• storage cells sanitization• air treatment

Main advantages of ozone application include:• Reduction of bacteria contamination along the whole

production chain• No residuals on surfaces• Increase shelf life and life extension in storage• Reuse of process water (+ 50% water saving)• Reduction of usage, transport and storage of chemicals• Less sludge produced in the biological treatment

De Nora NEXT ozone generators (MCP1-2-4-7-14, TPF, DTPF) are available in various sizes and capacities. They are able to generate ozone, on site and on-demand, start-ing from air or oxygen and with low power consumption (a few kW / h). In case of accidental leakages, the ozone generators auto-matically switch off thanks to an accurate ozone measure-ment performed by safety sensors.

www.denora.com

de nora, oZone SYSTeMS For THe SanITIZaTIon

D a alcuni anni l’industria alimentare si sta interes-sando sempre di più a tecnologie a basso impat-to inquinante, vista anche la sempre più sentita

necessità di salvaguardare l’ecosistema e l’ambiente che ci circonda. De Nora è in grado di rispondere a queste esi-genze con i propri sistemi ad ozono per la sanitizzazione di ambienti ed attrezzature e per il trattamento di acque di processo e reflue.

La linea di ozonizzatori De Nora NEXT, promuovendo l’utiliz-zo dell’ozono, come un complemento o una valida alterna-tiva green ai prodotti chimici utilizzati oggi per la sanitizza-zione e la difesa da patogeni, in ambito F&B per applicazioni quali: • imbottigliamento acque potabili;• sanitizzazione di barrique e tonneau • trattamento delle acque di processo e reflue• sanitizzazione in post raccolta e stoccaggio• sanitizzazione celle di conservazione• trattamento dell’aria

Tra i vantaggi derivanti dall’utilizzo dell’ozono abbiamo:• Riduzione della contaminazione da batteri, muffe lungo

tutta la lavorazione• Assenza di residui sulle superfici con cui entra a contatto• Aumento dei tempi di conservazione in cella e shelflife• Riciclo delle acque di processo con risparmio del consu-

mo d’acqua del 50%• Riduzione dell’utilizzo , trasporto e stoccaggio di prodotti chimici• Riduzione della quantità di fanghi prodotti dagli im-

pianti di depurazione

I generatori De Nora NEXT (MCP1-2-4-7-14, TPF, DTPF) sono disponibili in varie dimensioni e portate, e in grado di produrre ozono, on site e on demand, partendo da aria e con ridotti consumi energetici (pochi kW/h). In caso di negligenza o perdite accidentali, i sensori di sicurezza, di cui sono dotati tutti i generatori di ozono De Nora NEXT, interrompono automaticamente la produzione.

www.denora.com

DE NORA, SISTEMI AD OZONO PER LA SANITIZZAZIONE

our research - your future

INDUSTRIE DE NORA- CAT 2016 tecnologie.indd 1 26/02/16 12:38

Air, oxygen, electricityThe puritythat comes from Nature

www.denora.com [email protected]

+39 02 21292830

Ozone is a gas with high oxidising power,

active against bad odours, flavours and germs.

It decomposes after use and leaves no residues.

De Nora, with the line De Nora NEXT ozone

systems, uses the properties of ozone to ensure

higher quality of agro-food products, extend

shelf life and, at the same time, ensure healthier

products for the end consumers.

De Nora assists the Food & Beverage industry

in the design, supply and installation of ozone

plants, used with increasing success for:

•extending products conservation in the

storage, transport and distribution phases

• ensuring safer foods reducing bacteria,

moulds, yeasts, fungi and mycotoxins

•improving the efficiency process water

treatment

•wastewater treatment

•sanitising tanks, surfaces and equipment

In the oenological field De Nora NEXT ozone

plants are used for the sanitisation of steel,

resin and cement tanks and/or oak barrels

and casks in a safe, effective and economical

manner.

Ozone, pure strength.All the goodness of taste, without unpleasant surprises.

our research - your future

ozono210x297_food_ENG.indd 1 24/02/16 15.51


70

FO

OD

&B

EVER

AG

E TE

CHN

OLO

GY

CA

TALO

GU

E20

16 e

ditio

n


PUMPS FOOD&BEVERAGE TECHNOLOGY

P ompe Cucchi is a Company of design and production of gear transfer pumps, gear metering

pumps, piston and diaphragm meter-ing pumps and has been present since 1948 in metering and fluid transfer fields. Pompe Cuc-chi works in accordance with Quality System ISO 9001 ( 2008). The pumps are conformed to the Machinery Di-rectory 2006/42/EC, 93/68/EC, 2006/95/EC, 2004/108/EC and UNI EN ISO 14847, 809. On request we can supply pumps conformed to the di-rectory 94/9/EC ( ATEX), API 676, NACE MR 0175. All our pumps are certified EAC (old GOST-R) and RTN. In addi-tion to its production, Pompe Cucchi is Italian distribu-tor of the Jabsco industrial line pumps, GRACO pneu-matic diaphragm pumps and Grun-Pumpen drum pumps. Engineering, experience, expertise, passion and dedication, this is the formula for Pompe Cucchi works every day to offer the best product and service. See the production range in www.pompecucchi.com

MissionOur mission is to design and produce gear pumps and metering pumps with engineering criteria of product that meets the needs of our customers: quality, reli-ability, ease of inspection, maintenance and cleaning and also provide technical assistance based on a com-petent team of experts in order to find solutions for multiple applications in many areas through the use of innovative materials to meet the specific technical customers’ requirements and new industrial processes.

Back groundPompe Cucchi is present in the pumps field since 1948. Founded as a manufacturer of standard gear pumps for viscous and lubricants liquid and today, thanks to the realization of innovative projects, and the continue research of new materials and surface treatment, of-fers products that allow to pump and dosing non-lu-bricating fluids with extremely low viscosity with high pressures. Our products are marketed by a network of national agents and a number of dealer around the world. The project is managed by a team of engineers using last generation CAD stations.

DesignThe project is managed by a team of engineers using last generation CAD stations.

ProductionPompe Cucchi has installed a new con-trol numerically controlled machining centre with 18 pallets that can work 24 hours/day also not witnessed (without

operator) equipped with supervising software for the management, control and integration of MCM’s pro-duction systems. This machine has a robotized tool magazine (of 400 tools).

Special executionThe ongoing development of our pumps project and new materials research allowed us to produce pumps in TITANIUM and in HASTELLOY C. Executions can be differentiated with the installation of single mechanical seals, double in tandem, double back to back or magnetic coupling also ATEX certified. We have also developed the insertion of bushings and wear plates made of tungsten carbide and chromium oxide-covered shafts in some size of dosing pumps se-ries N used for metering of slightly abrasive products. On food sector, we have also the option to fit all com-ponents FDA certified.

Surface heat treatmentsThe new thermochemical treatments have given to gears and shafts, of some pumps range, surface hard-ness up to 4000 Vickers allowing new applications until a few years ago thought impossible.

TestAll pumps are hydraulically tested. The workshop is equipped with a pump test bench with a proper soft-ware for measuring, displaying and printing of various hydraulic and electrical parameters.

TrainingThe training of the sales engineers of our distributors or customers who wish to apply for this service is pro-vided by a 3D configurator visible in stereoscopy with passive glasses that allows the display of all the pumps exploded and entire assembly and disassembly of all the families of pumps of our production. This configurator also shows explanatory modules re-lated to pump cavitation and layout examples of a me-tering plant.

www.pompecucchi.com

POMPE CUCCHI, PUMPS FOR FOOD INDUSTRY

POMPE CUCCHI CATALOGO 2016.indd 1 08/02/16 16:19

CERTIFICATION UNI EN ISO 9001: 2008

ATEX EAC(old GOST-R) RTN(ROSTEKHNADZOR) API676 NACE MR0175

www.pompecucchi.com

Pompe Cucchi Srl - Via dei Pioppi, 39 Opera (MI) - Italy - Phone: +39 02 57606287 - Mail: [email protected]

Gear metering pumps “N” for food plant.

Piston and diaphragm metering pumps set “CP” - “CM”

Gear metering pumps “N” for Braskem plant.

Gear pumps range“B”

Gear metering pumps range“WP” Gear pumps range“MX”Gear metering pumps range“N”

Gear metering pumps “N” for Borouge 3 plant.

Gear flanged and monoblocelectropumps set “F” - “FM”

72

FO

OD

&B

EVER

AG

E TE

CHN

OLO

GY

CA

TALO

GU

E20

16 e

ditio

n


REFRIGERATION FOOD&BEVERAGE TECHNOLOGY

Z anotti Spa is an Italian excellence that designs and manufactures systems for food refrigeration

for over 50 years. Founded in 1962, the company evolved over time by impro-ving the series of products that curren-tly has become the most complete o� er on the market. Under the name of King of Cold, Zanotti o� ers products that are speci� cally designed for food refrigeration and more to fully meet the needs of the whole cold chain. Refrigerating units from the storage of raw materials, their processing, storage and distri-bution in supermarkets, to dedicated shops or restau-rants. Its units for refrigerated transport complete the range and ensure food handling safely.

The industrial division designs and makes installations for large-volume refrigeration needs and it has a spe-cial department that is devoted to the design and im-plementation of installations for ice rinks. Amongst the ones made in Italy, there are the ice rinks of Courma-yeur and Turin, but also the Arena of Minsk, which is the biggest one in Europe.

A leader in the � eld, Zanotti bases its professionalism on the constant search for technological innovations to apply to the products. As for green solutions for food refrigeration, for many years Zanotti has o� ered units for small- and medium-capacity cells that operate on gas with a very low environmental impact (GWP=3), such as Propane R290 or Propylene R1270. Lately, the range of NATURAL GAS products has expanded to be-come the most comprehensive range available on the market.

Condensing and CO2 monobloc (R744) units for indu-stry use are the latest in the � eld of ready-to-use ap-pliances. They are optimal solutions for quick and safe installation in medium- and large-capacity cells.

The latest regulations in terms of eco-sustainability and energy savings are encouraging energy-e� cient pro-ducts. The new condensing units designed by Zanotti have less refrigerant charge due to new technologies related to the mini-channel, low noise and increased accessibility to components during maintenance. For the new R407F condensing units, Zanotti has recently

obtained certi� cation in accordance with the program developed by ASERCOM in compliance with the Ecodesign directive, which, with respect to condensing units, will come into force on 7/1/2016. Only a few companies have had their units certi-� ed. Zanotti o� ers a very broad range of

products for applications ranging from small, medium to large capacities. For supermarkets and large logistics centers, it o� ers CO2 multicompressor systems in both subcritical and transcritical cycles, providing therefore a totally green product. The new generation of indu-strial systems with green solutions provides high per-formance by using screw compressors with speed con-trol and a variable compression ratio for high e� ciency. Still in the � eld of natural gas, ammonia (NH3) is used in the construction of industrial refrigeration plants for its historically recognized thermodynamic power. For many years Zanotti has worked with Eco-design proto-cols that involve the total recyclability of the machines at their end-of-life.

Zanotti Spa today is an international Group, formed by production units located in Spain, England, Brazil, and has a dense network of certi� ed distributors that provi-de expertise and assistance in all over the world.Recently Zanotti was chosen by large companies of the United Emirates for manufacturing refrigerating sy-stems for catering in two important local airports. The contract of approximately 30 Ml Euros requires systems of the greatest reliability, � rst class � nishes and rigo-rous hygienic conditions.Other successes ensure the reliability of Zanotti’s sy-stems, which are manufactured throughout the world, such as that in the Republic of Kabardino-Balkaria for the design and provision of a facility for the storage of apples in a controlled atmosphere for extended periods, up to 7 months. Here Zanotti has outclassed the German competition by submitting projects with advanced technologies that use non-toxic intermedia-te � uid from the foodstu� point of view.

Innovation, energy saving, quality and competence are the key words for the activities that Zanotti has carried out to date and the promises for the future.

www.zanotti.com

ZANOTTI, GREEN SYSTEMS FOR FOOD REFRIGERATION

ZANOTTI - CAT 2016 tecnConser_corr.indd 1 18/01/16 14:45

Zanotti Spa | M.L.King, 30 | Pegognaga - MN | T +39 0376 5551 | F +39 0376 536554 | [email protected] | www.zanotti.com

A complete range of refrigerating units working with NATURAL GAS for small, medium and big cold rooms

Zanotti_is working.1.indd 1 15/01/16 11:02

74

FO

OD

&B

EVER

AG

E TE

CHN

OLO

GY

CA

TALO

GU

E20

16 e

ditio

n


Meat processing technology FooD&BeVerage technology

A fter a 2012 marked by the event of the deadly earth quake in Emilia (6 months closed with very large economic losses), the Automatic Sys-

tem Control (ASC) was back on its feet with great dif-ficulty and in 2014 recorded a slight recovery and the placement of Automatic System Control in this cata-logue circulated at EXPO 2015, means that, despite Au-tomatic System Control is a small company, it is always able to serve even big ham factories.

Laser technology made by ASC-Mark, in fact, is of great in-terest to all: “This is the marking or laser marking for fresh

hams, cooked, seasoned, and half carcasses presented in 2012, who then got the Italian and European patent.”

Laser marking, in addition to fighting counterfeiting, enables to fulfill the European rules became operation-al from 01.04.2015, which requires permanent marking of stamps and lots up for sale at supermarkets.

Automatic System Control is at disposal for any info or requirements.

www.asc-mo.com

AutomAtic SyStem control (A.S.c.), mArking or lASer mArking

D opo un 2012 segnato dall’evento funesto del terremoto in Emilia (6 mesi di chiusura con danni economici molto grandi), la Automatic

System Control (A.S.C.) si è rimessa in piedi con grande fatica e nel 2014 ha fatto registrare una leggera ripresa e con la propria presenza in questo catalogo distribuito a EXPO 2015, desidera comunicare che, pur essendo una piccola realtà, è comunque in grado di servire anche i salumifici più grandi”.

La tecnologia Laser-Mark presentata da Automatic Sy-stem Control infatti è di forte interesse per tutti: “Si tratta della marcatura o bollatura laser per prosciutti freschi,

cotti, stagionati, e mezzene presentata nel 2012, che ha poi ottenuto il brevetto italiano ed europeo.”

La marcatura laser, oltre a combattere la contraffazio-ne, consente di assolvere alla normativa Europea diven-tata operativa dal 01-04-2015, che richiede una marca-tura indelebile dei bolli e dei lotti fino alla vendita presso la grande distribuzione.

Automatic System Control è a disposizione degli opera-tori per ogni eventuale esigenza o informazione..

www.asc-mo.com

AutomAtic SyStem control (A.S.c.), mArcAturA o bollAturA lASer

ASC - CAT 2016 tecnologie.indd 1 23/02/16 11:49

SISTEMA DI MARCATURA

CON TECNOLOGIA LASER – MARK

PER LA MARCATURA DI PROSCIUTTI

FRESCHI, COTTI, STAGIONATI

LA MARCATURA LASER SIGNIFICA

TRACCIABILTà COMPLETA DEL PRODOTTO MARCHIO INCANCELLABILE

DURANTE I PROCESSI DELLE LAVORAZIONI

MARKING SYSTEM

WITH LASER TECHNOLOGY - MARK LASER

FOR THE MARKING OF HAMS

FRESH, COOKED SEASONED

LASER MARKING MEANS

TRACCIABILTà COMPLETA PRODUCT

MARK INDELIBLE DURING THE PROCESS OF WORKING

Via della Locanda, 9 - 41036 Medolla - Modena (MO)Tel: +39 053553025 - Fax: +39 0535651929 - Mobile: [email protected] - www.asc-mo.com

ASC ADV EXPO.indd 3 05/06/15 16:56

76

Fo

oD

&B

eVer

ag

e te

chn

olo

gy

ca

talo

gU

e20

16 e

ditio

n


conFectionery FooD&BeVerage technology

COMPANYLawer is a solid and very Italian Company. The concentration of

the design department and production in the same plant provides control over the entire manufacturing chain. The company operates in Biella area, the largest district in the national production of high quality yarns and fabrics. The know-how gained since 1970 has provided the company with the right cre-dentials to present itself in many di� erent industrial � elds.Lawer today is a landmark for advanced dispensing sy-stems and � exible to adapt the same to the di� erent needs of each customer and holds a substantial number of international patents registered in many countries around the world .Besides the Italian headquarters, where Lawer produces 100% of its systems, Lawer actually has 4 foreign commer-cial/assistance units:TURKEY (Lawer Teknik Servis)CHINA (Lawer Shanghai Dispensing Systems)BRAZIL (Lawer do Brasil)UNITED KINGDOM (Lawer UK).

MISSIONQUALITY. A quality designed to last. This is the mission of Lawer, excellence expressed since the preliminary analysis to the commissioning of the equipment, to ensure safe and automated systems operated by high-class software, able to adapt themselves to the changing needs of manu-facturing companies. Quality is also the ability to provide the best service and maintenance, e� cient, worldwide available to be in every time close to its customers.ACCURACY. It is in every small detail that is measures the great value of a Company. Lawer has made a hallmark of accuracy. Only components of very high quality are se-lected for the installations, which are able to fully satisfy the requirements of current regulations.RESEARCH AND DEVELOPMENT. Since the beginning Lawer has always implemented the strategic decision to invest substantially in men, in research and new techno-logies. The task of � nding the most innovative technical solutions for the continuous improvement of systems.SAFETY. Lawer meant to be a security for their customers and to ensure a total reliability of its systems and an excel-lent (a long term) availability of spare parts. AFTER SALE ASSISTANCE. Flexibility, professionalism, ca-pillarity of the international network with highly quali� ed Agents. A timeliness after-sales service, able to respond to every request and problem-solving, with quali� ed technicians, 4 Service Centres, a Web on-line remote assistance.

ENVIRONMENTAL FRIENDLY. Lawer is one of the � rst companies in Italy to have joined “Sustainable Technologies”, for equipment and technologies that target to the centre of the manufacturer cycle the reduction of

power, water and chemical materials for a more responsible production process and careful to consumption. The com-pany is equipped with photovoltaic panels to self-produce and use renewable energy , and go on in the research of productive solutions addressed to environmental respect.

PRODUCTSLawer’s production is specialized in automatic weighing/dosing systems for powder and liquid ingredients.All Lawer’s systems can automatically weight powders being parts of the recipes or batches in the food industry preparations where ingredients micro dosage is required. All Lawer’s systems are the result of 40 years of Lawer ex-perience and know-how in the design and manufacturing of dosing systems for many di� erent applications in dif-ferent type of industrial production. With the automatic powder dosing systems it is possible to grant: • Highest quality of the fi nished product• Highest weighing precision• Replicability of the recipes• Right balance of raw materials• Production management, effi ciency and cost reduction• Complete confi dentiality of Know-how• Optimisation of production, less production time

MORE TIME/LESS COSTS, the automatic dosage system usage reduces the production time with consequently re-covering of e� ciency and marginality. CONFIDENTIALITY, it is possible to keep secret the composition of the recipe and protect your creativity and your know-how. CON-TROL, accessing a protected area, it is possible to monitor and verify the daily production, monthly production, the consumption of each single raw material or each single recipe. REPLICABILITY, in a fully automatic way, the system repeats countless times the error free weighing of the micro-ingredients of the recipes, guaranteeing a constant quality at all times. Less errors, less cost, higher quality of the � nished product. TRACEABILITY, all weight operations carried out are saved and made available for a perfect tra-ceability. SAVING, the systems contribute to reduce errors and time in the recipe preparation, thus reducing costs of production and personnel.Lawer is the ideal partner for the automation of the powder micro-ingredients dosing.

www.lawer.com/index.php/it/

LAWER, AUTOMATIC WEIGHING SYSTEMS FOR POWDERS

LAWER CAT 2016.indd 1 10/12/15 11:23

®

dosing & dispensing systems

LAWER S.p.A. - Via Amendola 12/14 - 13836 Cossato (Bi) ITALY @ [email protected]

A well-established Italian company since 1970, a worldwide excellence in industrial dispensing systems, providing state-of-the-art technology in automatic dispensing systems for powder products, single and multiple weighing systems, granting dosing accuracy, repeatability, errors reduction, traceability, safety and know-how protection. Lawer, a flexible and trustable partner for every powder automatic dosing.

Automatic Powder Dosing

www.lawer.com

www.lawerunica.com

78

Fo

oD

&B

eVer

ag

e te

chn

olo

gy

ca

talo

gU

e20

16 e

ditio

n


silicone iteMs FooD&BeVerage technology

T .P.S. Srl is a young and dynamic Company spe-cialized in the production of silicone items 100% platinic for the food industry, to meet the needs

of bakers, pastry cooks , ice-cream makers, chocolate ma-kers and restaurateurs. Our company aim is quality, the-refore we’ve choosen to have a plant with technologically advanced production lines, selecting the best raw mate-rials. We only use 100% platinic silicone that not only has an excellent temperature range from -40° C to 260 °C (-40 to 500 °F) but is also totally atoxic, inodorous and taste-less, complying with the various international legislations that specify the use of products meant for use/contact with food, ensuring the maximum health safety. Further-more, to optimize the food properties, every single pro-duct undergoes a heat-treatment in special ovens. TPS has a skilled design and mould production workshop that enables the creation and manufacturing of own design as well as customers’ ideas. Our experience and professio-nalism make it possible to create from the most simple

to the most complex shapes in order to match the needs of even the most di� cult customer. All production cycles are done within our plant in order to guarantee our custo-mers the maximum discretion concerning those products especially done according to their design / demand.The main source of T.P.S. Srl is consolidated in the range of products MADE IN ITALY created on speci� c customer requests and manufactured with the use of silicone 100% platinic. Experience and professionalism have made TPS to become preferred partner of the most important com-panies in the food, medical and industrial sectors.To ensure the quality of our products, daily visual inspec-tions and tests on � nished items are done according to:D.M. n° 104 del 21-03-1973 (Italy), Arreté du 25-11-1992 (France),BfR (Germany), FDA (USA).Our commitment i s to satisfy our customers’ requests ensuring the best quality, pricing, experience and professionality.

www.tpssiliconici.it

TPS, SILICONE ITEMS FOR FOOD INDUSTRY

L a T.P.S. Srl è un’azienda giovane e dinamica special-izzata nella produzione di articoli in silicone 100% platinico per l’industria alimentare, per soddisfare le

esigenze di panifi catori, pasticcieri, gelatieri, cioccolatieri e ristoratori.La nostra azienda punta principalmente alla qualità del prodotto, per questo abbiamo dotato le nostre linee di produzione con le più moderne attrezzature ad alta tecnologia ed effettuato una scelta accurata della materia prima.Utilizziamo esclusivamente Silicone 100% platinico, che oltre ad avere un’ottima escursione termica da -40° C a + 260° C, è completamente atossico, inodore ed insapore in conformità alle Leggi internazionali che regolano l’utilizzo dei materiali destinati al contatto ed/o uso alimentare assi-curando la massima sicurezza per la salute. Per migliorarne ulteriormente le caratteristiche di alimentarietà ogni singo-lo prodotto subisce un trattamento termico in forni speciali. Disponiamo di un’offi cina per la progettazione e realizzazi-one degli stampi che grazie all’esperienza ed alla profes-sionalità dei nostri esperti ci permette di realizzare prodotti a campione o su disegno, dalle forme semplici a quelle più

complesse, con dimensioni massime di cm 60 x 40, e sod-disfare così le richieste dei clienti più esigenti. L’intero ciclo di lavorazione si compie all’interno dell’azienda in modo da garantire ai clienti la massima riservatezza dei prodotti es-eguiti su loro specifi ca richiesta.La ricchezza di T.P.S. SRL si consolida quindi nella gamma dei prodotti rigorosamente MADE IN ITALY realizzati su specifi che richieste della clien-tela ed ottenuti con l’impiego di Silicone 100% platinico.La nostra esperienza e professionalità ha fatto si che T.P.S. SRL sia stata scelta come fornitore di primarie aziende setto-riali.Per garantire la qualità del prodotto vengono eseguiti quotidianamente controlli visivi e test sul prodotto fi nito, formulati secondo le normative: D.M. n° 104 del 21-03-1973 (legislazione italiana), Arreté du 25-11-1992 (legislazione francese), BfR (legislazione tedesca), FDA (legislazione USA). L’impegno e la serietà di T.P.S. SRL sono totalmente dedicati a soddisfare le richieste del cliente assicurando qualità, prezzo, esperienza e professionalità.

www.tpssiliconici.it

TPS, ARTICOLI IN SILICONE PER L’INDUSTRIA ALIMENTARE

TPS - CAT 2016.indd 1 10/12/15 11:30

TPS adv expo.indd 3 08/04/15 11:46

80

Fo

oD

&B

eVer

ag

e te

chn

olo

gy

ca

talo

gU

e20

16 e

ditio

n


BaKery anD pastry eQUipMent FooD&BeVerage technology

T he story of Tecnopool is one born out from a big idea: design, ma-nufacture and installation of ma-

chinery for the treatment and processing of food products.

A story that began in 1980 with the patenting of Anacon-da: the � rst conveyor belt conceived by the company’s founder, Leopoldo Lago.

A winning and above all versatile product, suitable for all manufacturing processes where food products need to be thermally treated.

It was the beginning of a success story that has never stopped, as the results achieved in the last 35 years have been testifying: growth of sales, an increasingly wide-spread presence on foreign markets, and an ongoing evolution of the products. The story of Tecnopool be-gan in Padua, but today that story has crossed domestic boundaries to be told all over the world.

From deep-freezing to cooling, from pasteurizing to pro-o� ng, from product handling all the way to baking and frying, the term � exibility goes hand in hand with all Tec-nopool solutions.

Before developing a plant, Tecnopool thinks of those who will use it, because � exibility for it is not only a men-tal factor, it’s above all a work approach.

This is precisely the purpose of its design o� ce: it helps to establish an exclusive relationship with the customers, based on straightforwardness, clarity and competence. A relationship built on the meeting and exchanging of ideas that starts early in the planning phase and ends with the construction of the system.

This is how Tecnopool develops plants that are truly cu-stomized for each customer and for every type of space, plants that guarantee the maximum in terms of producti-vity and the minimum in terms of maintenance.

The versatility of Tecnopool plants is proven by the sec-tors in which it is applied: it’s no coincidence that its technology is often behind the processing of a food pro-duct.

FreezingThe know-how Tecnopool has acquired allows it to gua-rantee a method that is absolutely avant-garde for the

treatment of packaged or bulk food pro-ducts, which are conveyed on belt and de-ep-frozen in cabinets that have insulated walls with variable thickness.

CoolingA system designed for two types of cooling: Ambient and with forced air in room. It is precisely this � exibility that makes it suitable for any manufacturing line and any kind of packaged or bulk food product.

Proo� ngSuch a delicate process deserves all attention. This is why Tecnopool has always developed plants that are per-fectly calibrated that do not alter the properties of the food products and which therefore respect both the end product and the consumer.

PasteurizingTo make the treated products reach the right tempera-ture within the required time, it is essential to carefully cover every detail: it is no coincidence Tecnopool designs complex plants that use insulated rooms to treat the food products in accordance with parameters that are con-stantly monitored.

Diathermic Oil Spiral Oven Tecnopool, faithful to its philosophy of simplifying pro-duction lines for mechanical and economic reasons, has completed its range of plants with a spiral cooking sy-stem which, thanks to its con� guration, allows for space saving and a smooth production process.Tecnopool spiral oven makes it possible to save space, simplify the � ow of the production line and save energy.

Thermal Oil FryerTecnopool increases its product range with another pro-cessing machine that allows it to complete new produc-tion lines that meet customer requirements in the areas of meat, � sh, bread and sweets, snacks, peanuts and even pet food: Tecnopool fryer.

Tecnopool provides its customers of a test facility com-plete with makeup line, proo� ng chamber, spiral oven and deep-freezing room; by appointment, the facility is at the customers’ complete disposal to test the functio-nality and the quality of Tecnopool systems, as well as to evaluate the results of each step of the production on their own product. Everyone is invited.

www.tecnopool.it

TECNOPOOL, THE BEST CHOICE

TECNOPOOL CAT 2016.indd 1 30/12/15 10:56

82

FO

OD

&B

EVER

AG

E TE

CHN

OLO

GY

CA

TALO

GU

E20

16 e

ditio

n


BAKERY AND PASTRY EQUIPMENT FOOD&BEVERAGE TECHNOLOGY

AM TECHNOLOGY, AvANT-GArdE ANd CusTOMizEd HANdLiNG sYsTEMs

AM Technology Srl, is a modern and dy-namic Italian company working in the field of industrial technology, which

originated from the deep technical skills and experience recognized by the entire operative team.AM Technology designs and realizes avant-garde han-dling systems, offering complete and customized solu-tions to the specific needs.The quality of the products, the reliability of the technolo-gies, and innovative solutions are the main objectives that the company aims to provide, alongside the best ser-vice to its customers.AM Technology’s portfolio includes several industrial pro-cess and handling systems for the food industry, which entail the exclusive use of materials that comply with in-

ternational standards of food compatibility, with specific designs for the best cleaning and sanitation solutions, and in full compliance with International and European safety standards.Proofing - Cooling - Freezing - Pasteurization and Han-dling system are the processes that AM Technology faces daily, offering highly flexible solutions, customizing pro-jects and proposing solutions tailored to customer needs.The professional know-how accrued by AM Technology during its experience has made it one of the most quali-fied actors in the food processing industry.Should you require additional information, do not hesitate to consult AM Technology’s website or contact us directly.

www.am-technology.it

AM Technology Srl, azienda italiana ope-rante nell’ambito della tecnologia in-dustriale, è una realtà moderna e di-

namica, che nasce dalle profonde competenze tecniche e dalla riconosciuta esperienza dell’intero team operativo.AM Technology progetta e realizza impianti di movimen-tazione all’avanguardia offrendo soluzioni complete e personalizzate alle specifiche esigenze.La qualità dei prodotti, l’affidabilità delle tecnologie, e le soluzioni innovative, sono i principali obbiettivi che l’a-zienda si prefigge per poter fornire il miglior servizio alla propria clientela.Il portafoglio prodotti offerti da AM Technology include una vasta gamma di sistemi industriali di processo e mo-vimentazione per l’industria alimentare, che prevedono l’impiego esclusivo di materiali che rispettano le norma-

tive internazionali di compatibilità alimentare, con design specifici per ottenere la migliore pulizia e sanificazione, e nel pieno rispetto degli standard di sicurezza europei ed internazionali.Lievitazione - Raffreddamento - Surgelazione - Pastorizza-zione e Movimentazione sono i processi che AM Techno-logy affronta quotidianamente, offrendo soluzioni alta-mente flessibili, personalizzando i progetti e proponendo soluzione adeguate alle esigenze del cliente.Il Know-how professionale maturato da AM Technology du-rante la sua esperienza, l’ha resa una degli attori più quali-ficati nell’industria della lavorazione dei generi alimentari.Per ulteriori informazioni, non esitate a consultare il sito web di AM Technology, o a contattarci direttamente.

www.am-technology.it

AM technology, iMpiAnti di MoviMentAzioneAll’AvAnguArdiA e personAlizzAti

AM TECHNOLOGY CAT 2016.indd 1 22/02/16 18:10

AM Technology S.r.l.Via della Tecnica, 66 - 36043 Camisano Vicentino (VI) - Italy

PROOFING

COOLING

DEEP FREEZING

PASTEURIZING

HANDLINGS

Tel: +39 0444 1323156 Fax: +39 0444 1835493 E-mail: [email protected] Website: www.am-technology.it


84

FO

OD

&B

EVER

AG

E TE

CHN

OLO

GY

CA

TALO

GU

E20

16 e

ditio

n



E SMACH SPA is a company from Vi-cenza that has been producing dou-gh processing equipment for almost

� fty years, with the perfect mix of cutting-edge technology, sensitivity towards the en-vironment, respect for tradition and enthusiasm for the future boundaries of fragrance. Esmach unites the past and the fu-ture in this spirit, re-inventing baking and revolutionising the ancient work of bakers. It simpli� es the production process, maintaining the naturalness and quality of bread made as it used to be made, with mother yeast added to authentic � our, and forges a new model of baker who mixes dough by day, not by night any more, giving the advantage of a more “normal”, and undoubtedly sunnier, lifestyle. Through EsmachLab, the innovative bread, pizza and pastry laboratory that makes ba-king competitive and whose simplicity guarantees excellent � nished product quality, the company addresses those who want to undertake a new business or model their own format while respecting the environment and energy saving, aiming for extremely high quality products. Created with the idea that the quality of life is important, and that the genuineness of the � nished product is fundamental for business success, Even though EsmachLab shortens preparation and baking times, its products are fresh, healthy and delicious. It is a dynamic place, 32 sq.mt. or less, that transforms during the day. It produces naturally leavened oven-baked products when consumed most: breakfast, lunch, aperitif, and pizza. These multi-purpo-se environments of the “oven-pizzeria-restaurant-bar-pastry shop” type are extremely popular in today’s hard times, and they o� er amazing business opportunities.

Esmach is the ideal partner for making your business a suc-cess because it blends equipment supply with consultancy and initial technical support, all of which are essential for starting and developing a business. Esmach is a reference point that can supply the most suitable solution for doughs, mother yeast, leavening (even for dough and pizza), yeast storage and lots more. The company’s extraordinary know how and its unique experience that has consolidated over years of study, research and innovation, means that Esmach can perfect cutting-edge technology suitable for a winning and competitive business.

“In People and Mother Dough we trust” is Esmach’s philoso-phy, which includes continuous product, quality and service innovation while remaining faithful to the healthy princi-ples of artisan savoir faire, made of people and passion. Our symbol is ancient and evocative: it takes its inspiration from the oriental Yin and Yang symbols, and in a modern key it dynamically represents the solution to problems, symboli-sed by the circling and “global” movement of the two po-

wers. Esmach harmoniously blends hot and cold, rotation, completeness, balance and life. The reference to the circular movement of a mixer is immediate, recalling also the movement of the � uids and solids that are

inside our machines. At the same time, it also communicates our values and objectives, expressing the e� ciency of our machines and their ability to preserve the characteristics of the products that are mixed and worked, the diligence and responsiveness of our men.

One of our new generation products is the SPI range of spiral mixers, which unites the technological development of each individual component with the cultural and traditional qua-lity of the processed bread, pizza and pastry doughs. Esmach has placed its attention on controlling various parameters for managing and developing doughs; these parameters consider new tendency products, the rheology properties of the mixes, their duration, their end temperature and their versatility of use, with reference to minimum and maximum dough quantities. Even the aspect that protects the health of professionals has not been forgotten. The mixer tank is equipped with a double lid that acts as a guard to keep the � our inside, eliminating the dispersion of sensitising agents which can cause progressive breathing disturbances.

The quality of the dough and the futuristic design make these mixers a unique product, without counterparts. They project from past to future and have colours that evoke what they process: intense olive green, like the wheat in spring and sun yellow, like the ripe wheat which is tran-sformed into bread. The structural solidity of the SPI mixers, their external coatings, which are powder painted with an anti-corrosion treatment, their extreme versatility, reliability and excellent safety, their high working accuracy, ergono-mics (in particular the control panel with control console that can be rotated both left and right), and captivating design exalt the best tradition of dough, projecting it into the future. The balanced ratio between bowl and spiral arm rotation, the geometry of the spiral arm which follows the bowl walls and the spiral arm and bowl speed are perfect for obtaining uniform, soft and re� ned mixtures, even with mi-nimum quantities of dough, and greatly reduce the working time and dough heating content.

The SPI range is available in 10 models, either electromecha-nical or electronic, that can be equipped with optional to-ols such as the built-in water dosing system and the dough temperature detector with infrared sensor.

www.esmach.com

ESMACH SPA, UNITES THE PAST AND THE FUTURE

ESMACH CAT 2016.indd 1 29/01/16 14:24

Passione, tecnologia e tradizione. Tutto questo è il mondo delle attrezzature Esmach: le nostre apparecchiature e impastatrici racchiudono infatti cinquant’anni di esperienzanel settore della pani�cazione e sono costruite pensando alle esigenze e alle attività dei maestri della farina.

Perché l’aria è così buona in uno spazio di lavoro�rmato Esmach? Perchè utilizziamo nella progettazione delle nostre macchine le migliori tecnologie e materiali e perché abbiamo fatto

nostre le norme europee atte a tutelare la salute dei professionisti del pane.

Come l’impastatrice SPI F, che nei suoi 10 modelli unisce robustezza, design e versatilità, il tuttonella massima af�dabilità e sicurezza grazie alla protezione a doppio coperchio che permette alla polvere di farina di rimanere al suo interno, eliminando le dispersione di agenti sensibilizzanti che, a tendere, possono causare disturbi respiratori.i

Dai spazio alla tua creatività, Esmach è nell’aria!

ESMACH È NELL’ARIA

Scopri la potenza di SPI F su www.esmach.com/impasto/spi-f Vieni a conoscere Esmach e la tecnologia delle sue impastatrici: visita www.esmach.com/contatti per maggiori informazioni.

86

FO

OD

&B

EVER

AG

E TE

CHN

OLO

GY

CA

TALO

GU

E20

16 e

ditio

n



“T he company Z.matik has 30 years of expe-rience in the production of pastry and bake-ry machinery, especially manual dough she-

eters, croissant groups, working tables, planetary mixers, mixers and cutting rollers in AISI 304 steel. By choosing the most appropriate materials, Z.matik ensures sturdi-ness and user-friendliness for every machine.

The Z.matik dough sheeters are designed to be functional, sturdy and easy to use, and thanks to their versatility, they can be used in small and medium-sized laboratories. The materials used and the minimum maintenance required to ensure good results make the Z.matik dough sheeter an e� ective and pro� table asset. The Z.matik dough sheeters are supplied in various models: counter SF500BN, SF500BL (500x500, 500x750), with base SF500N, SF500L (500x750, 500x1000), SF600N, SF600L (600x1000, 600x1400) and SF600LT (600x1400 with cutting station). The SF600L mo-del, the company’s � agship product, now features an in-

novative design. All Z.matik dough sheeters are equipped with pull-out shelves, dual control (foot pedal and rocker arm) cylinders, with 80mm diameter and 47mm opening. Upon request, the Z.matik dough sheeters can be supplied in AISI 304 stainless steel and a 2-speed motor or inverter can also be applied according to customer needs.

The company’s latest innovation is the automatic dough sheeter, available in three versions: SF6514A (650x1400 mm), SF6516A (650x1600 mm), SF6520A (650x2000 mm). This type of machine allows the customer to choose the mode of operation (manual, semi-automatic or automa-tic). It also includes several optional features, such as a cutting station, a winder and a � our duster, in AISI 304 stainless steel. Thanks to a convenient 5.7” colour touch-screen panel, the customer can select the most suitable processing system and save 50 recipes.”

www.zmatik.com

THE Z.MATIK DOUGH SHEETERS

“l ’azienda Z.matik vanta un’esperienza trenten-nale nella produzione di macchine per panifi ci e pasticcerie, in particolare di sfogliatrici ma-

nuali, gruppi per croissant, tavoli da lavoro, planetarie, impastatrici e rulli di taglio in acciaio Aisi 304.

Grazie alla scelta dei materiali più appropriati Z. matik garantisce robustezza e semplicità d’uso in ogni tipo di macchina. La funzionalità, la robustezza, la semplicità d’uso sono elementi essenziali delle Macchine Sfogliatrici Z.matik, la cui versatilità permette l’impiego in piccoli e medi laboratori. I materiali impiegati e la minima manu-tenzione necessaria per un buon risultato fanno della sfo-gliatrice Z.matik un valido ed economico collaboratore. Le sfogliatici Z.matik possono essere fornite in vari modelli: da banco SF500BN, SF500BL (500x500, 500x750), con ba-samento SF500N, SF500L (500x750, 500x1000), SF600N, SF600L (600x1000, 600x1400) e SF600LT (600x1400 con stazione di taglio). Il modello SF600L, prodotto simbolo

dell’azienda, gode ora di un design innovativo. Tutte le sfogliatici Z.matik sono disposte di piani estraibili, dop-pio comando (pedale e bilanciere) cilindri diametro 80 mm e apertura 47 mm. A richiesta le sfogliatici Z.matik possono essere fornite in acciaio inox 304 ed inoltre si può applicare il motore a 2 velocità o inverter ad esigenza del cliente. L’ultima innovazione dell’azienda è la sfogliatrice automatica disponibile in tre versioni: SF6514A (650x1400 mm), SF6516A (650x1600 mm), SF6520A (650x2000 mm).

Questa tipologia di macchina permette al cliente di sce-gliere la modalità di utilizzo (manuale, semiautomatico, automatico); essa conta anche la presenza di alcuni optio-nal, tra cui la stazione di taglio, arrotolatore, sfarinatore, versione inox AISI 304. Il comodo pannello da 5.7” touch screen a colori consente di scegliere il sistema più adatto di lavorazione e memorizzare 50 ricette.”

www.zmatik.com

MAcchine sFogliAtrici z.MAtiK

ZMATIK -CAT 2016-MEZZAtecnologie.indd 1 22/12/15 17:12

Italian Quality

SZ 507 BL

SZ 507

SF 6514A

SF 600 L

TL300-I

GC 200

The best quality for pastry machines

Z.Matik Pastry Machines - Via Fiesso, 4 - 35020 Z.I. Arre (PD) Italy - Tel. (+39) 049 9599935 - Fax (+39) 049 9501482Web site: www.zmatik.com - E-mail: [email protected] - Skype: z.matik.pastry.machines

88

FO

OD

&B

EVER

AG

E TE

CHN

OLO

GY

CA

TALO

GU

E20

16 e

ditio

n



EXPERIENCE AND PASSION IN THE MARKET OF MACHINERY FOR PASTRY AND BAKERY

Alba & Teknoservice srl designs and produces equipments for bakery and pastry industry as:

croissant machines, make-up tables, dou-gh billets preparing systems, laminating lines, ciabatta bread lines, multisize bread lines, pita, num bread, lavash lines, cracker lines, special lines and custom design machines. The high quality of these equipments is due to the great passion developed in over 30 years of experience.

The founders of the company begin in 1982 their expe-rience at renowned company in the industry and in 1992 open Teknoservice Snc, which begin dealing with servi-cing, repairs and interventions on their own or on behalf of major manufacturers.

The founders’s experience gained as CIM and Teckno-ma-tik technicians, a long-time leader companies in the fi eld of machinery for pastry and bakery, leads them to deve-lop projects increasingly complex and technologically advanced, and thanks to continued collaboration with their customers, they realize the fi rst automatic groups for croissants, make-up tables, ciabatta, bread lines and crackers lines and a variety of customized automations.

This ongoing attention to the needs of the customer and assistance in the development of its automations brings Teknoservice to grow more and more, until making the decision in 2005 to transform the company, originally founded as service / intervention, in a leading company in the market of machinery for pastry and bakery: so ALBA & Teknoservice Srl is founded.

ALBA & Teknoservice is present in all continents through its machinery, accessories and spare parts. Our technicians provide direct or phone assistance all over the world.

ATTENTION AND PROFESSIONALITY to evaluate the best intervention.ALBA & Teknoservice S.r.l. is careful to understand the needs of customers, to fi nd the best way to meet them in their interests and to solve problems by careful analysis

of its technicians to assess the best type of intervention according to the production. The company’s strength is based on many years of experience serving our customers, off ering advice, projects and technology to

companies of global signifi cance, both manufacturers of machinery that manufacturers of pastry and bakery. ALBA & Teknoservice develops customized solutions and provi-des a service of great experience and readiness. It is also able to develop new recipes and new products with the aid of expert technologists.

The sales department is assisted by an organization ai-med at customization for the customer and an adequate technical development, able to process the data on time for both making the off er and to realizing the product.

Last innovation in the market: ARTISAN PIZZA LINE Albaequipment introduces a new Artisan Pizza Line!As all its innovations the Line is highly customizable and allows to produce pizzas of diff erent sizes, weights and with diff erent topping.

Who but an Italian company can achieve the most Italian product? Experience, passion, innovation and satisfaction are the cornerstones on which the philosophy of ALBA & Teno-service is focused.All these factors have led Albaequipment to produce ex-tremely performing and customizable Artisan Pizza Lines, which are enjoying great success worldwide.

From a simple table to a complete line, Albaequipment can compose and draw with you the most suitable ma-chine.

Artisan Pizza Lines provide synchronized devices that en-sure accuracy and consistency in the processing, as well as really innovative systems of pressing the balls, with the possibility of collecting the product by hand or feed pan-ning systems, proofers, freezers.

Artisan Pizza Line can be equipped with tomato distributors, spreading systems, cheese topping units and much more...

www.albaequipment.it

ALBA&TEKNOSERVICE-CAT 2016-MEZZAtecnologie.indd 1 23/12/15 16:38

AlbA & Teknoservice s.r.l. - Via delle Industrie, 26 - 35010 VIllAFRANCA P.NA. (PD) ITAlYTel. +39 049.9070380 - Fax +39 049.9074042 - www.albaequipment.it - e-mail: [email protected]

DOUGH BILLETS PREPARING SYSTEM

NO BETTER WAY TO MAKE CROISSANTS


AlbA & Teknoservice s.r.l. - Via delle Industrie, 26 - 35010 VIllAFRANCA P.NA. (PD) ITAlYTel. +39 049.9070380 - Fax +39 049.9074042 - www.albaequipment.it - e-mail: [email protected]

DOUGH BILLETS PREPARING SYSTEM

NO BETTER WAY TO MAKE CROISSANTS

INGOMBRO ADV.indd 3 26/06/15 09:49INGOMBRO ADV.indd 3 26/06/15 13:07

90

FO

OD

&B

EVER

AG

E TE

CHN

OLO

GY

CA

TALO

GU

E20

16 e

ditio

n


OVENS FOOD&BEVERAGE TECHNOLOGY

TUBINI FORNI, TUNNel OveNs “cUsTOm-made”

T UBINI FORNI is located in province of Verona (Italy) to 1 km from the airport of Verona .We operate in the sector of tunnel ovens for over

50 years; so we have acquired a considerable experience in this specific sector.

Our strong point is the realization and supplying of goods which accede to client needs and preferences; as we de-sign and build “custom-made”, both from a functional and aesthetic point of view.

Being a small business, we embody the utmost flexibility and reliability in all stages of production.The materials used are of the highest quality and reliable source.Over the years TUBINI FORNI has built a solid reputation on the territory, in Italy and abroad, maintaining its arti-san characteristics of hard work, professionalism and hon-esty.

www.tubiniforni.it

T UBINI FORNI è situata in provincia di Verona (Italia) ad 1 km dall’ aeroporto di Villafranca di Verona.Operiamo nel settore dei forni a tunnel da oltre 50

anni, abbiamo perciò acquisito una cospicua esperienza in questo specifico campo.Il nostro punto forte è la realizzazione e la fornitura di un bene che aderisca alle esigenze ed alle preferenze del cliente, dato che lo progettiamo e lo costruiamo “su misu-ra”, sia dal punto di vista funzionale , sia dal punto di vista estetico.

Essendo un’azienda di piccole dimensioni incarniamo la massima flessibilità e affidabilità in tutte le fasi di produ-zione.I materiali impiegati sono di primissima qualità e di pro-venienza sicura .Tubini Forni si è costruita negli anni una solida reputazio-ne sul territorio, italiano ed estero, mantenendo le sue ca-ratteristiche artigianali di operosità, serietà ed onestà.

www.tubiniforni.it

TUBINI FORNI, FORNI a TUNNel “sU mIsURa”

TUBINI FORNI CAT 2016.indd 1 02/03/16 12:17

TUBINI FORNI s.r.l.Via Staffali, 38 - Zona Artigianale - 37062 - DOSSOBUONO di VILLAFRANCA di VERONA - ITALIA

Tel. (0039) 045 8600220 - Fax 045 8618259E-mail: [email protected] - www.tubiniforni.it

FORNI AUTOMATICI A TUNNEL

92

FO

OD

&B

EVER

AG

E TE

CHN

OLO

GY

CA

TALO

GU

E20

16 e

ditio

n


AUTOMATION FOOD&BEVERAGE TECHNOLOGY

AVENTICS is a globally active manufacturer of pneumatic components and systems. The brand values “passion”, “agile”, and “focused” reinforce

AVENTICS’ brand essence and express the company’s mind-set towards work, customers and partners. Char-acteristics that made AVENTICS a big player in industrial pneumatics sector, offering customized services and so-lutions.

AVENTICS, formerly known as Rexroth Pneumatics, can count on 2.100 employees worldwide and has manufac-turing sites in Laatzen (Germany), Bonneville (France), Eger (Hungary), Lexington (USA) and Changzhou (China) and sales offices in more than 40 countries around the world.

AVENTICS products are used in the industrial automation sector, life science products, trucks, railway technology,

and the food & beverage and energy industries. For the food & beverage sector, AVENTICS is specialized in solu-tions for food processing and packaging.

“Machine builders value easy to use, robust and reliable pneumatic components from AVENTICS. They require en-ergy efficiency and safe solutions that comply with regu-lations” - explains Luigi Locatelli, Sales Manager of AVEN-TICS Italia. “This is the strength of AVENTICS: we focus on these requirements. By endorsing the use of modified polymers, the integration of electronics in pneumatics, and focusing on Industry 4.0, we give designers what they need. In this way we become advisors for clients, meaning that we offer customers the best product for their specific needs, giving a complete service, not just a component, but a solution”.

www.aventics.it

AVENTICS: THE NEXT GENERATION PNEUMATICS

A VENTICS è un’azienda produttrice di componenti e sistemi pneumatici che opera a livello mondia-le. Passione, agilità e focus sono i valori AVEN-

TICS che esprimono dinamismo, competenza nel setto-re, dedizione e orientamento al cliente. Caratteristiche che hanno fatto di AVENTICS un big player del business pneumatico che offre soluzioni e servizi personalizzati.

AVENTICS, precedentemente conosciuta come Rexroth Pneumatics, può contare su 2.100 collaboratori in tutto il mondo e vanta stabilimenti di produzione a Laatzen (Germania), Bonneville (Francia), Eger (Ungheria), Le-xington (USA) e Changzhou (Cina) e filiali commerciali in oltre 40 Paesi nel mondo.

I prodotti AVENTICS trovano applicazione nei settori dell’automazione industriale, delle attrezzature me-dicali, veicoli mobili, tecnologia dei mezzi ferroviari e nell’industria alimentare ed energetica. Per il settore del food&beverage AVENTICS è specializzata in soluzioni

per la lavorazione e il confezionamento dei generi ali-mentari.

“I costruttori di macchine richiedono ad AVENTICS com-ponenti pneumatici affidabili, robusti e facili da usare. Inoltre, cercano soluzioni ad alta efficienza energetica, che siano nel contempo sicure e conformi alle normative” - spiega Luigi Locatelli, Sales Manager di AVENTICS Italia.

“È questo il punto di forza di AVENTICS: ci concentriamo proprio su queste richieste. Promuovendo l’impiego di polimeri modificati e l’integrazione dell’elettronica nel-la pneumatica in ottica Industry 4.0, diamo ai progetti-sti ciò di cui hanno bisogno. In questo modo diventia-mo consulenti per i clienti, nel senso che offriamo loro i prodotti migliori per specifiche esigenze, garantendo un servizio completo: non solo un componente, ma una soluzione”.

www.aventics.it

AVENTICS: THE NEXT GENERATION PNEUMATICS

AVENTICS - CAT 2016.indd 1 29/01/16 16:04

216_150-ADV-AVENTICS-210x297-soggPNEUMATICS-senzastrillo-NM_0-conv.indd 1 18/04/16 09:21

94

FO

OD

&B

EVER

AG

E TE

CHN

OLO

GY

CA

TALO

GU

E20

16 e

ditio

n



C ontrinex is a leading manufacturer of sensors for factory automation. The Swiss company, headquar-tered in Givisiez near Fribourg (CH), has a unique and

innovative range of products whose features far surpass tho-se of standard sensors. Since its foundation in 1972 by Peter Heimlicher, Dipl Ing ETH, Contrinex has grown from a one-man operation to a multinational group with over 500 em-ployees worldwide. More than 15 subsidiaries cover the core markets in Europe, Asia, North and South America. Contri-nex manufactures its own sensors, safety and RFID systems in 4 production locations: Switzerland (since 1972), Hungary (since 1995), China (since 2003) and Brazil (since 2009).

At a glance • Technology leading manufacturer of inductive and pho-

toelectric sensors as well as safety and RFID systems• World market leader for miniature sensors, sensors with

long operating distances and devices for particularly de-manding operating conditions (allmetal, high-pressure and high-temperature resistant sensors)

• Represented in over 60 countries worldwide, headquar-ters in Switzerland

• 8000 products

INTELLIGENT SENSORS FOR THE 4TH INDUSTRIAL REVOLUTION: INDUSTRY 4.0 Fit for the future with IO-LinkIntelligent sensors are the fundamental building blocks of modern smart factories. They enable sensor-supported production resources (machines, robots, etc.) to confi gure, control, manage and optimize themselves. Precise, reliable sensor data is now more essential than ever. Sensors from Contrinex, the leader in intelligent sensor technology, en-sure excellent data quality. To communicate that data, all Contrinex inductive and photoelectric ASIC sensors will be equipped with IO-Link as standard. Customers use either the sensor’s binary PNP output or its intelligent IO-Link in-terface. Both are available in one and the same device.

www.contrinex.com

CONTRINEX, SENSORS FOR FACTORY AUTOMATION

C ontrinex occupa un posto di primo piano tra le azien-de produttrici di sensori per l’automazione industriale. Questa azienda svizzera, con sede principale a Givi-

siez, vicino a Friburgo (CH), può contare su un catalogo pro-dotti unico e innovativo, le cui caratteristiche superano am-piamente quelle dei sensori standard. Dal 1972, anno della sua fondazione da parte dell’ingegnere Peter Heimlicher, laureato al politecnico di Zurigo, Contrinex si è trasformata da ditta individuale a multinazionale, con più di 500 dipendenti nel mondo. Più di 15 fi liali coprono i mercati principali di Europa, Asia, Nord e Sud America. Contrinex produce i sensori e sistemi di sicurezza e RFID in quattro stabilimenti: Svizzera (dal 1972), Ungheria (dal 1995), Cina (dal 2003) e Brasile (dal 2009).

Panoramica• Azienda leader nel settore dei sensori induttivi e fotoelettrici,

nonché nei sistemi di sicurezza e RFID• Leader mondiale nel campo dei sensori miniaturizzati, dei sen-

sori con distanza di intervento elevata e dei dispositivi per con-dizioni di esercizio particolarmente complesse (sensori tutto-

metallo, resistenti alle alte pressioni e alle alte temperature)• Rappresentanze in oltre 60 paesi in tutto il mondo, casa madre

in Svizzera• 8000 prodotti

SENSORI INTELLIGENTI PER LA 4° RIVOLUZIONE INDUSTRIALE: INDUSTRIA 4.0Pronti per il futuro con IO-LinkI sensori intelligenti sono i mattoni fondamentali delle mo-derne fabbriche intelligenti. Essi sono un valido supporto alla produzione (macchine, robot, ecc) per confi gurare, controlla-re, gestire e ottimizzare gli stessi. Avere informazioni precise e sicure dai sensori è oggi più che mai essenziale. I sensori della Contrinex, leader nella tecnologia dei sensori intelligenti, as-sicurano eccellenti qualità di dati. Per trasmettere i dati, tutti i sensori Contrinex induttivi e optoelettronici ASIC saranno equi-paggiati con IO-Link di serie. I clienti possono utilizzare l’uscita PNP del sensore o la sua interfaccia intelligente IO-Link.

www.contrinex.com

CONTRINEX, SENSORI PER L’AUTOMAZIONE INDUSTRIALE

CONTRINEX - CAT 2016.indd 1 07/01/16 17:45

Inverno 2014/2015

SENSORI FOTOELETTRICI

ü SERIE C12: SUBMINIATURIZZATI CUBICI

ü SERIE C23: CUBICI CON IO-LINK

ü DISTANZA C23: TRIANGOLAZIONE

ü DISTANZA C55: TIME-OF-FLIGHT

SENSORI INDUTTIVI

ü C23 FULL INOX: CUBICO CON IO-LINK

ü ALTA TEMPERATURA: 230°C

ü ECO: CON IO-LINK

ü WELD-IMMUNE: CLASSICS

RFID

ü MODULI R/W LF + HF CONTRINET

LANCIO WEBSHOP CONTRINEX

SENSORI PER L’INDUSTRIA 4.0

HUB LOGISTICA A DALLAS

C23 SENSORI INDUTTIVI E FOTOELETTRICISensori induttivi e fotoelettrici miniaturizzati con elevate caratteristiche

NEWS

Inverno 2015 / 2016

ü SENSORI INDUTTIVI HIGH TEMPERATURE

ü SENSORI INDUTTIVI CLASSICS WASHDOWN

ü SENSORI INDUTTIVI FULL INOX MINIATURE

ü SENSORI FOTOELETTRICI SERIE M18

ü SAFETINEX IN CUSTODIA SOTTILE

ü MODULI RWM RFID AD ALTA FREQUENZA + IO-LINK

ü TESTER PER SENSORI

SITO DI PRODUZIONE, CINA

SITO DI PRODUZIONE, SRI LANKA

NUOVA SERIE HIGH TEMPERATUREA LUNGHISSIMA DURATA, SENZA SILICONEAffidabilità eccezionale e durata molto estesa in cicli di temperatura da -25°C a +180°C

NEWS

Advert _Two_News _It.indd 1 07.01.2016 14:26:33

96

FO

OD

&B

EVER

AG

E TE

CHN

OLO

GY

CA

TALO

GU

E20

16 e

ditio

n



Company Specialized in the production of clean-room it searces Innovations and devolpments al-ways to improve its products. As the time this ex-

traordinary event EXPO, collaborates launching your new and innovative Program, certainly from the Character and From Tradition of EVOserviceS, INNOVATORS with products and solutions which improve always the quality of work and the food produced from the most important italian companies, which since forever with honor and tradition maintain the highest levels QUALITY of Italian products in the World. Ghibli DOOR presents an innovative system latches for cleanroom patented, juntion free and therefore without a possible settlement of bacteria. Made of SOLID SURFACES with continue weld joints and a constant den-sity. It’s a Panel which exceeds every minimal cracks due from aluminum outline and silicone joints, which charac-terize door and walls of the controlled contamination ar-eas. The panel of the door is completely smooth and with

rounded edges, without INTERSTICES and extremely easy to clean. The raw material, with which it’s made, resists of Detergents, at high temperatures, it presents no alteration with water and is resistant of immersion Without any ex-pansion.The panel is highly resistant of shock, and regenerated in case of scratches, marks or tears. Available in variation shutter or sliding, manual or automatic and at the option of realize panels in large sizes, moreover you can equip it with all typical accessories like perfectly planar glass, locks and access control.

This new system of closures expandes significantly the technologic contained of closures cleanroom it’s the first system of doors which removes totally the aluminum out-line resulting a monolithic impenetrable block.

www.evoservices.net

EVO SERVICES, InnOVatIVE ClOSuRES ClEanROOm

A zienda specializzata nella realizzazione di ca-mere a contaminazione controllata che ricerca sempre innovazioni ed evoluzioni per migliorarsi.

Contemporaneamente a questa straordinaria manifesta-zione EXPO, collabora lanciando il suo nuovo e RIVOLU-ZIONARIO programma, certamente dal carattere e dalla tradizione di EVOserviceS, INNOVATORI con prodotti e soluzioni che migliorano sempre la qualità del lavoro e del cibo prodotto dalle più importante aziende Italiane, che da sempre con lustro e tradizione mantengono ad al-tissimi livelli la QUALITA’ dei prodotti italiani nel mondo. GHIBLI DOOR presenta un innovativo sistema di chiusure per camere bianche brevettato, privo di giunzioni e perciò di possibili punti di deposito ed insediamento batterico. Realizzato in SOLID SURFACES con saldature continue e a densità costante. È un pannello che supera tutte le seppur minime fessurazioni dovute dai profili di alluminio e giun-zioni siliconate, tipiche delle porte e delle pannellature di aree a contaminazione controllata.

Il pannello è completamente liscio e dai bordi arrotondati, senza interstizi ed estremamente facile da pulire. La ma-teria prima con la quale è realizzato resiste ai detergenti, alle alte temperature, non presenta nessuna alterazione con l’acqua e resiste all’immersione senza alcuna dilata-zione. Il panello risulta fortemente resistente agli urti, e rigenerabile in caso di graffi, segni o rotture. Disponibile nelle versioni battente o scorrevole, manuali o automati-che e con la possibilità di realizzare pannelli di ampie di-mensioni, sono inoltre dotabili di tutti gli accessori tipici come visive perfettamente planari, serrature e controllo accessi.

Questo nuovo sistema di chiusure amplia sensibilmente il contenuto tecnologico delle chiusure di camere biancheed è il primo sistema di porte che elimina totalmente i pro-fili perimetrali risultando un monolitico impenetrabile.

www.evoservices.net

EVO SERVICES, SIStEmA INNOVAtI VO dI ChIuSuRE pER CAmERE bIANChE

EVO SERVICES - CAT 2016.indd 1 16/02/16 15:43


98

FO

OD

&B

EVER

AG

E TE

CHN

OLO

GY

CA

TALO

GU

E20

16 e

ditio

n



For over half a century, Rotronic has manufactured and supplied measuring systems. Founded in 1965 by the Schroff family in Switzerland, the company

rapidly grew to become an important player in its industry; the precision of its products brought it to a prominent role in the humidity and temperature measurement segment. Over time, Rotronic’s solutions evolved, remaining always on the cutting edge of technology, while the quality and reliability of its products, that led the Rotronic brand to its present worldwide notoriety, remained unaltered.The vast range of systems provided by Rotronic ensures extremely accurate performances; the company pays great attention to researching solutions that are increas-ingly responsive to the market’s demands, and recently enriched its offer with instruments for the measurement of carbon dioxide and differential pressure. From portable instruments to data loggers, from trans-mitters to laboratory solutions, Rotronic products are

idea for all industries where precise humidity and tem-perature measurements are required, such as, the food industry, pharma, drying processes and many other ap-plications.Rotronic’s headquarters are near Zurich, in Switzerland, where the production units may also be found. The main elements of all Rotronic solutions are manufactured in plants owned by the company. This allows a very strict and constant quality control; the headquarters also host the quality control department and gauging laboratory.In such a specialised sector, the sales personnel’s technical skills are essential. From this standpoint, Rotronic experts stand out for their professional capabilities and their flex-ibility: they can suggest the most appropriate solutions for every situation and work along with the clients so as to define and implement the ideal solution.

www.rotronic.it

RotRonic italia SRl, MEaSUREMEnt SolUtionS

D a oltre mezzo secolo, Rotronic produce e distribui-sce sistemi di misura. Fondata nel 1965 dalla fami-glia Schroff in Svizzera, l’azienda ha rapidamente

conquistato una notevole importanza nel suo settore gra-zie alla precisione dei suoi prodotti, diventando una delle più importanti realtà del segmento della misurazione di umidità e temperatura. Nel tempo le soluzioni Rotronic si sono evolute mantenendosi sempre all’avanguardia, ma è rimasta inalterata l’indiscussa qualità e affidabilità dei prodotti, che hanno portato il marchio Rotronic a diffon-dersi in tutto il mondo.La vasta gamma di strumenti offerta da Rotronic assicu-ra prestazioni di estrema accuratezza; l’azienda pone una grande attenzione alla ricerca di soluzioni sempre più ri-spondenti alle esigenze di mercato, e ha recentemente ar-ricchito la propria offerta con strumenti per la misurazione dell’anidride carbonica e della pressione differenziale. Dagli strumenti portatili ai data logger, dai trasmettitori alle soluzioni per il laboratorio, le soluzioni Rotronic sono

adatte a tutti i settori in cui sono richieste misurazioni pre-cise di umidità e temperatura: in particolare l’industria ali-mentare, farmaceutica, i processi di essiccazione e molte altre applicazioni. La Casa madre di Rotronic ha sede nei pressi di Zurigo, in Svizzera, dove si trovano anche gli stabilimenti. Gli ele-menti centrali di tutte le soluzioni Rotronic sono realizzati in unità produttive di proprietà dell’azienda. Questo con-sente un controllo di qualità stringente e costante; presso la sede si trovano anche il reparto di controllo qualità e il laboratorio di calibrazione e taratura. In un settore così specializzato la competenza tecnica del personale commerciale è centrale. Da questo punto di vi-sta gli esperti di Rotronic si distinguono per professionali-tà e flessibilità, proponendo le applicazioni più adatte per ogni situazione in modo da arrivare, collaborando con il cliente, alla definizione di soluzioni ottimali.

www.rotronic.it

RotRonic italia SRl, SiStemi Di miSuRa

ROTRONIC - CAT 2016.indd 1 04/03/16 17:16

Precisione svizzera ai massimi livelli

Rotronic Italia srlVia Repubblica di San Marino 1, 20157 Milano - Tel 02 [email protected] - www.rotronic.it

Soluzioni di misuraper vari parametri

ATTIVITÀ DELL'ACQUA

PUNTO DI RUGIADA

PRESSIONEDIFFERENZIALE

PRESSIONEDI PROCESSO

CO2

TEMPERATURA

UMIDITÀ

FLUSSO

RIT Inserat_MV KatalogV17_A4.indd 1 1/28/2016 4:00:32 PM

100

FO

OD

&B

EVER

AG

E TE

CHN

OLO

GY

CA

TALO

GU

E20

16 e

ditio

n



T elmotor SpA was founded in Bergamo in 1973 as a company specialized in electrical supplies and distribution of industrial automation products and

brands. Telmotor gradually expanded its skills to the sec-tors of energy distribution, lighting, building & home tech-nology and renewable energy, with a broad spectrum of integrated solutions for industry, infrastructures and ter-tiary areas.

Divided among three major business units – Industry Au-tomation, Energy Solutions and Light Consulting – today Telmotor has seven different branches and 280 employees, with a sales volume of more than 110 million euros.

The company’s exceptional technical profile, highly profes-sional technicians and constant updating staff, the problem solving philosophy, careful selection of hi-tech brands and products, its distribution philosophy, all-inclusive technical

advice and assistance and focus on market development are distinctive features that make Telmotor SpA the ideal part-ner to find the best possible solution in the shortest time.

Telmotor is the only Siemens Distributor Solution Partner for the Industry Automation and Drive Technologies sector. The company’s philosophy is also recognized by other in-ternational partners, such as Rittal who gave Telmotor the Industry Solution Advanced Certification.

Not just a simple supplier for its customers, Telmotor devel-ops on-demand solutions in order to guarantee its partners highly specialized service and consultancy. A solid and suc-cessful company, committed to grow, who is planning two new openings in 2017 and a huge investment on a brand new warehouse to extend Bergamo headquarters.

www.telmotor.it

TELMOTOR, TAILOR-MADE SOLUTIONS FOR INDUSTRIAL AUTOMATION

T elmotor SpA nasce a Bergamo nel 1973 come azien-da specializzata nelle forniture elettriche e nella distribuzione di prodotti e marchi di qualità per

l’automazione industriale. Negli anni Telmotor ha progres-sivamente ampliato le proprie competenze al settore della distribuzione di energia, all’illuminazione, alla building & home technology e alle energie rinnovabili, gestendo solu-zioni integrate ad ampio raggio per il mondo dell’industria, delle infrastrutture e del terziario.

Costituita da tre grandi Business Unit - Industry Automa-tion, Energy Solutions e Light Consulting – Telmotor oggi conta ben sette diverse sedi aziendali e 280 collaboratori, raggiungendo un volume di affari superiore ai 110 milioni di euro.

L’alto profilo tecnico dell’azienda, il personale qualificato e in costante aggiornamento, l’attitudine al problem sol-ving, l’accurata e attenta selezione dei marchi e dei prodot-ti gestiti, la rapidità del servizio, la consulenza al cliente e

l’attenzione alle evoluzioni del settore sono i tratti distintivi della filosofia aziendale che hanno reso Telmotor un punto di riferimento del settore a livello internazionale.

Telmotor è l’unico Distributore Solution Partner di Siemens nel settore Industry Automation e Drive Technologies. La professionalità dell’azienda è inoltre riconosciuta da altri prestigiosi partner, come Rittal che ha assegnato a Telmo-tor la Certificazione Industry Solution Advanced.

Telmotor non si pone quindi come semplice fornitore di prodotti, bensì come sviluppatore di soluzioni, capace di garantire ai propri interlocutori servizio e consulenza al-tamente specializzati. Un’azienda solida, costantemente orientata alla crescita, con in programma due nuove inau-gurazioni entro il 2017 e un imminente investimento per l’apertura di un nuovo capannone per ampliare la sede di Bergamo.

www.telmotor.it

TELMOTOR, SOLUZIONI SU MISURA PER L’AUTOMAZIONE INDUSTRIALE

TELMOTOR - CAT 2016.indd 1 04/03/16 11:24

102

FO

OD

&B

EVER

AG

E TE

CHN

OLO

GY

CA

TALO

GU

E20

16 e

ditio

n


components FooD&BeVeRAGe tecHnoLoGY

T he story of igus began over 50 years ago in Colo-gne, Germany, with Günter Blase and his wife, who started an activity of supplier for plastic moulded

components. Observing his machines and those of his cu-stomers, Günter Blase realized that two areas in which he could do much to improve quality and functionality, were energy chains and self-lubricating bearings in high-tech plastic. Next to the quality, a fundamental point was the ability to produce standard products, put them on stock, making them available quickly to customers. A winning idea, since it was not so common to have quickly products of this kind.

The first product has been energy chains, then specific ca-bles for dynamic applications followed, so that the classi-cal problem of poor reliability and durability of the whole system could be overcome. And so, in 25 years, igus has specialized in the development of specific cables for fle-xible use, also with connectors. The complete kit “ready-

chain” including chain, cables, connectors (and warranty), ready for installation, is now one of the strengths of igus.Next to chains and cables, another segment on which igus has worked over these years, is the one of self-lubri-cating bearings.

They have been developed over forty five different types of materials and now there are on stock bearings with dia-meters from 3 to 150 mm. The same for linear bearings, suitable for industrial applications where the quality of movement and noise are important points, especially where it is not be possible to use grease or lubrication.

The food industry is one example, but there is no indu-strial sector where igus can not offer a solution with its products and the quick availability.

Quality products, with immediate availability even in small amounts, even online on website www.igus.eu

Igus, specIalIzed In The developmenT of lubrIcaTIon free componenTs

L a storia di igus inizia oltre 50 anni fa a Colonia in Germania per volere dei coniugi Blase che iniziaro-no un’attività di contoterzisti per lo stampaggio di

materie plastiche. Osservando le sue macchine e quelle dei suoi clienti Günter Blase si rese conto che due aree in cui si poteva fare molto per migliorare qualità e funzionalità erano legate alle catene portacavi e ai cuscinetti autolu-brificanti in materiale plastico ad alta tecnologia. Accan-to alla qualità, un punto fondamentale era la possibilità di produrre prodotti standard, metterli a magazzino ren-dendoli disponibili velocemente alla clientela. Un’idea vin-cente, visto che non sempre si riuscivano ad avere in tempi rapidi prodotti di questo genere.

I primi prodotti furono le catene portacavi seguite poi dai cavi specifici per posa mobile, affinché i problemi classici di scarsa affidabilità e durata dell’insieme potessero es-sere superati. è così che da 25 anni, igus si è specializzata nello sviluppo di cavi specifici per posa mobile, anche già

connettorati. Il kit completo “readychain” comprendente catena, cavi, connettori (con garanzia), pronto per l’instal-lazione, è oggi uno dei punti di forza di igus.

Accanto a catene portacavi e cavi, un altro segmento su cui igus si è mossa nel corso degli anni è quello dei cusci-netti autolubrificanti. Sono state sviluppate oltre quaran-tacinque differenti tipologie di materiali e sono oggi dispo-nibili a magazzino cuscinetti con diametri dai 3 ai 150 mm. Medesimo discorso vale per i cuscinetti lineari, indicati per le applicazioni industriali in cui la qualità del movimento e la silenziosità sono particolarmente importanti e soprat-tutto dove non sarebbe possibile immaginare di utilizzare cuscinetti o guide ingrassate. L’industria alimentare ne è un esempio, ma comunque non c’è comparto industriale e non in cui igus non possa esser presente con i propri arti-coli e soprattutto con la loro grande disponibilità in tempi rapidi. Prodotti di qualità, con disponibilità immediata di piccole quantità, anche online sul sito www.igus.it

igus, speciaLizzata neLLo sviLuppo di componenti senza Lubrificazione

IGUS - CAT 2016.indd 1 29/02/16 12:23

Senza lubrificazione ...Cuscinetti in polimeri iglidur®

dry-tech® cuscinetti autolubrificanti ... the-chain semplicemente energia in movimento

-foodtech.it

Senza corrosione ...Sistemi lineari drylin® in acciaio inox

Senza usura ...Cuscinetti a sfere xiros® e snodi sferici igubal®

igus® S.r.l. Tel. 039 59061 [email protected] plastics for longer life®

Senza manutenzione ...Sistemi per catene portacavi e cavi chainflex®

IT-1053-foodtech 210x297_IT-1053-foodtech 210x297 17.05.15 20:25 Seite 1

104

Fo

oD

&B

eVeR

AG

e te

cHn

oLo

GY

cA

tALo

GU

e20

16 e

ditio

n


GeAR motoRs FooD&BeVeRAGe tecHnoLoGY

mini motor four big categories combine to crea-te a comprehensive and extended product ca-talogue. Mini Motor production consists in some

ten thousands of products, considering numerous versions of equipment requested, capacities, reduction gear, connection type, protection level and optional (such as encoder and elec-tromagnetic brake). Product versions are also made according to the applications they are meant for, upon which further va-riants such as particular paints, increased power, to name some but few, are proposed. All these versions combine to create a comprehensive and extended catalogue that is being constan-tly updated. That is further reason why Mini Motor has decided to group its production into macro categories, as follows: • Motors and Coaxial Gear Motors: Asynchronous three-phase

and single phase motors with 2 or 4 poles from 9 to 740 W. Available in two sizes: 55 mm and 80 mm.

• Worm screw gear motors. Worm screw gear motors, available in four sizes: with c/c distance 20, 26, 32, 38. Reduction ratios up to 475, torque up to 90 Nm (XCE 150 Nm).

• Brushless gear motors and motors. Brushless 4-pole sinusoi-

dal motors from 32 to 880 W, with torque from 0.085 to 2.4 Nm. Planetary reduction units with reduction ratios up to 49 and torque up to 95 Nm. Worm screw reduction units with reduction ratios up to 80 and torque up to 9 Nm.

• BLDC and Drivers. 230 Vac drives for brushless and asynchro-nous motors, with and without feedback for power ratings up to 750 W. 24/48 Vdc brushless motors and gear motors with integrated drive with absolute, multiturn encoder and range bus; power ratings up to 500 W.

customization: the added value. Mini Motor added value can be seen in its capacity of going beyond standard off er and provide ad-hoc products that can truly meet peculiar require-ments such as size, challenging application, extreme tempera-ture conditions, etc. Owing to a potentially endless application fi eld and market asking for increasingly customized and diff e-rentiated products, this skill turns out quite strategic as to be able to meet any requirement in real time and keep unchanged all the privileges of Mini Motor “absolute quality”. www.minimotor.com

mInI moTor: a caTalogue “eXTended” To Thousands of applIcaTIons

Q uattro categorie per migliaia di articoli. Ad oggi la produzione Mini Motor conta alcune decine di migliaia di referenze, in considerazione di numerose

varianti che non riguardano soltanto il tipo di apparecchia-tura richiesta ma anche la gamma di potenze disponibili, i rapporti di riduzione, i tipi di connessione, il grado di prote-zione e gli optional (come encoder e freno elettromagnetico). Naturalmente le varianti del prodotto sono anche in funzione delle applicazioni a cui è destinato, in base alle quali interven-gono altre variabili come vernici particolari, maggiorazioni di potenza, ecc. In questa moltiplicazione di articoli è quindi più appropriato parlare di “catalogo esteso” in continuo aggior-namento. Anche per questo motivo, Mini Motor ha opportu-namente scelto di raggruppare la propria produzione in quat-tro grandi categorie:• Motoriduttori coassiali: Motori asincroni trifase e monofase

2 e 4 poli da 9 a 740 W. Motoriduttori coassiali ad ingranaggi, disponibili in due taglie: 55 mm e 80 mm.

• Motoriduttori a vite senza fi ne: Motoriduttori a vite senza fi ne, disponibili in quattro taglie: interasse 20, 26, 32, 38. Rapporti di riduzione fi no a 475, coppia fi no a 90 Nm ( XCE 150 Nm).

• Servomotori brushless: Motori brushless sinusoidali 4 poli da 32 a 880 W, con coppia da 0,085 a 2,4 Nm. Riduttori epicicloi-dali con rapporti fi no a 49 e coppia fi no a 95 Nm. Riduttori vite senza fi ne con rapporti fi no a 80 e coppia fi no a 9 Nm.

• BLDC e Drivers Azionamenti 230 Vac per motori brushless e asincroni, con e senza retroazione per potenze fi no a 750 W. Motori e motoriduttori brushless con azionamento integrato a 24/48 Vdc con encoder assoluto multigiro e bus di campo; potenze fi no a 500 W.

mini motor: il valore aggiunto. Da sempre, il valore aggiunto di Mini Motor si riconosce nella sua capacità di andare oltre all’offerta standard di mercato per fornire prodotti ad hoc in grado di soddisfare richieste peculiari riguardo a dimensioni, gravosità di applicazioni, condizioni di temperatura estreme, ecc. Con un campo di applicazioni potenzialmente infi nito e un mercato che chiede forniture sempre più personalizzate e differenziate, questa capacità si rivela strategica per poter ri-spondere in tempo reale ad ogni richiesta mantenendo intatte tutte le prerogative della “qualità assoluta” Mini Motor. www.minimotor.com

mini motor: un cataLogo “esteso” per migLiaia di appLicazioni

MINIMOTOR CAT 2016-MEZZAtecnologie.indd 1 10/12/15 11:26

www.minimotor.com - [email protected]

Min

i Motor ap

p

• for iPad •

IP67 smallgearmotors for the

packaging industry.

106

Fo

oD

&B

eVeR

AG

e te

cHn

oLo

GY

cA

tALo

GU

e20

16 e

ditio

n


sYstems FoR InDUstRIAL AUtomAtIon FooD&BeVeRAGe tecHnoLoGY

T he linear and the rotary movements, and the complete capping process can be completely de-coupled from carousel movement, thus guaran-

teeing constant process quality.

LinMot linear rotary motors, distributed in Italy by Pamoco, can realize any arbitrarily combined linear androtational movements. Motion profi les, linear or rotary speeds, press forces or tightening torques can be con-trolled completely independent from each other. In ad-dition, the cap position can be monitored at the end of capping procedure in order to detect caps that did not reach their fi nal position or slanted sitting caps. For this reason, linear-rotary motors are used in fl exible cappers where the capping process is fully programmable.Together with the modular drive series M8050 the linear rotary motors allow easy and simple implementation of compact carousel multi head capping machines. Only motor, logic supply and communication bus have to be

supplied through slip rings on the carousel, to be wired to the individual multi head modules. As the motor ca-bles are mounted fi x, no moving cables or cable tracks are needed on the carousel, resulting in long live and long service intervals.

The linear and the rotary movements and therefore the complete capping process can be completely decoupled from carousel movement. This guarantees a constant process quality also at diff er-ent speeds or startup and shutdown of a machine. With strokes up to 300mm it is now also possible to use Lin-Mot’s linear rotary motors in cappers for voluminous bot-tles or aerosols with pump or spray closure in which the long suction tube is inserted vertically together with the cap.

For more details please visit the following website: www.linmot.com

neW lInmoT, consTanT QualITY In servo cappers

i movimenti lineari e rotativi, e tutti processi di tappa-tura possono essere totalmente disaccoppiati dal movimento della giostra, garantendo un processo

con qualità costante

I motori lineari rotativi di LinMot, distribuiti in Italia da Pamoco, permettono di combinare movimenti lineari e rotativi. I profi li di moto, le velocità lineari o rotative, le forze di spinta e le coppie di serraggio possono essere completamente controllate in maniera indipendente una dall’altra. In aggiunta la posizione del tappo può essere ri-levata alla termine della procedura di tappatura al fi ne di capire se il tappo non ha raggiunto la sua posizione fi nale oppure se si è inclinato. Per questi motivi il motore lineare-rotativo viene utiliz-zato per tappatrici fl essibili ove il processo di tappatura è totalmente programmabile.Insieme all’azionamento modulare serie M8050 il motore lineare-rotativo permette una semplice implementazione di giostre multi testa di tappatura. Soltanto l’alimenta-

zione del motore, l’alimentazione delle logiche ed il bus di comunicazione devono essere forniti i attraverso i “contatti rotanti” della “giostra” collegandoli direttamen-te ad ogni singolo modulo multi testa. Grazie al fatto che il cavo motore è fi sso non ci sono cavi o catene portacavi in movimento sulla giostra, con il risultato di una elevata durata di vita e lunghi intervalli di manutenzione.

I movimenti lineari e rotativi e tutti processi di tappatura possono essere totalmente disaccoppiati dal movimento della giostra; questo garantisce un processo con qualità costante anche a differenti velocità od in fase di parten-za o di arresto della macchina. Con corse sino a 300 mm è ora possibile utilizzare il moto-re lineare rotativo in tappatrici per bottiglie di grandi di-mensioni, aerosols o spray nei quali il lungo tubo di aspi-razione è inserito verticalmente insieme al tappo.

Per ulteriori informazioni consultare il sito Internet: www.linmot.com

Linmot, QuaLitÀ costanteneLLa servotappatura

PAMOCO CAT 2016-MEZZAtecnologie.indd 1 17/12/15 13:57

108

FO

OD

&B

EVER

AG

E TE

CHN

OLO

GY

CA

TALO

GU

E20

16 e

ditio

n


BOILERS FOOD&BEVERAGE TECHNOLOGY

I. VAR. Industry Srl world leader as a manufacturer of industrial boilers, member of Zucchelli Group com-pany, present on the market since 1956, designs

and manufactures steam generators, diathermic fluid heaters and hot water boilers for residential, industrial and food use with high efficiency > 95 % and low NOx, constructing them with full respect of environment and energy saving.Our mission is to satisfy every need, creating customiza-tion based on the requests of each customer maintaining national and international regulatory standards. In fact all the proposed range has the required certificates and quality standards to enable us to offer our products in any EC country and outside the EC.A wide range of solutions with high level of technology both in design and production. Thanks to the use of the best materials and technologically advanced machines, we are able to manage internally all the processing stages

from laser cutting of sheets, to shaping, automatic weld-ing by numerical control machines. We are also able to of-fer the “rental” service and the construction of “turnkey” plants.Our production covers most of capacities required by market keeping the energy saving as one of the main objectives. The range is divided into: hot water - super-heated water - direct and indirect steam generators - dia-thermic fluid heaters - “special” engineering and construc-tion (combustion air heat recovery, steam accumulators, steam producers, steam generator whit fluegas recovery, economizers).The offer is finally completed offering our customers a maintenance of boilers/generators, thanks to the know-how of our highly specialized technicians, to ensure the extension of the useful life.

www.ivarindustry.it

IVAR, BOILERS AND STEAM GENERATORS FOR FOOD AND INDUSTRIAL PROCESSES

I. VAR. Industry Srl è leader mondiale come costrut-tore di caldaie industriali, Azienda del Gruppo Zucchelli presente sul mercato dal 1956 progetta e

costruisce generatori di vapore e caldaie per fluido diater-mico fino alle caldaie di acqua calda per uso residenziale, industriale e alimentare con alti rendimenti >95% e basso NOx, realizzandole nel pieno rispetto dell’ambiente e del risparmio energetico. La nostra missione è quella di sod-disfare qualsiasi esigenza, realizzando personalizzazioni sulla base delle richieste di ogni singolo cliente pur man-tenendo gli standard normativi sia nazionali che interna-zionali. Infatti tutta la gamma proposta possiede le certifi-cazioni e gli standard qualitativi necessari per poter offrire i nostri prodotti in qualsiasi paese comunitario ed extra comunitario.Un’ampia offerta di soluzioni ad alto livello tecnologico sia nella progettazione che nella produzione. Grazie all’impiego dei migliori materiali e di macchine tec-nologicamente all’avanguardia, siamo in grado di gestire

internamente tutte le fasi di lavorazione, dal taglio lamiere al laser, alla sagomatura, saldatura robotizzata con mac-chine a controllo numerico. Siamo inoltre in grado di pro-porre il servizio di “noleggio” e la realizzazione di impianti “chiavi in mano”.La nostra produzione copre le maggiori potenzialità che il mercato richiede mantenendo tra gli obbiettivi principali il risparmio energetico. La gamma si suddivide in: acqua cal-da - acqua surriscaldata - generatori di vapore diretti e indi-retti - caldaie a fluido diatermico - progettazioni e costruzio-ni “speciali” (recuperatori aria comburente, accumulatori di vapore, evaporatori, generatori di vapore a recupero fumi, economizzatori). L’offerta infine si completa proponendo ai nostri clienti la manutenzione delle caldaie/generatori, gra-zie al know-how dei nostri tecnici altamente specializzati, per garantirne il prolungamento della vita utile.

www.ivarindustry.it

IVAR, CALDAIE E GENERATORI DI VAPORE PER PROCESSI ALIMENTARI E INDUSTRIALI

IVAR_energiaTec.indd 1 29/01/16 17:03

THE RIGHT INGREDIENT FOR YOUR QUALITY

I.VAR. Industry Srl, La qualità di una vasta gamma di prodotti che comprende caldaie acqua calda, acqua surriscaldata, generatori di vapore e caldaie a olio diatermico al servizio di tutti i processi industriali alimentari.

“La migliore qualità per una migliore efficienza”

The quality of a big range of products including hot water boilers, superheated water boilers, steam boilers, diathermic oil heaters for any food industrial process. “The best quality for the best efficiency”

I.VAR. Industry Srl http://www.ivarindustry.it/ - [email protected] tel. +39 045 66 800 82


110

FO

OD

&B

EVER

AG

E TE

CHN

OLO

GY

CA

TALO

GU

E20

16 e

ditio

n


CO-GENERATION - BIOGAS FOOD&BEVERAGE TECHNOLOGY

S PK Power Generation designs, sets up, supplies and manages Generation Power Station through endo-dermic motors. SPK PG proposes a complete range

of co-generation motors fed by fossil or sustainable fuel such as natural gas, biogas from anaerobic digestion or from land� ll and diesel, able to produce electric, thermic, freezing and steaming energy in generative, co-genera-tive and tri-generative assets.One of the most important aspect is the mechanical de-sign activity is to integrate standard endothermic motors with thermos-technical parts creating compact systems easy to maintain and very e� cient.

Through electric and electro-technical abilities, SPK devel-ops switchboards (control and distribution), emergency or parallel connections and the electricity grid as well. In

Possagno (TV) warehouse, activities such as production, assembling and test of generation and co-generation, switchboards assembling and equipment take place.SPK supplies multi-years maintenance services supported by modern and high-technological tele-control systems which allow best results for e� ciency and continuity in plants production.

SPK Power Generation is part of AUSTEP Group, leader in designing and building of biogas, bio-methane and wastewater treatment plants. SPK and Austep Group competences are able to guarantee a customized 360° so-lution really trustable and well known as well as a highly skilled H24 service.

www.spkpg.com

SPK POWER GENERATION, COMPLETE RANGE OF CO-GENERATION

S PK Power Generation, progetta, realizza, fornisce e gestisce centrali di Generazione di Energia Distribu-ita con motori endotermici. Propone una gamma

completa di macchine di cogenerazione, alimentate da fonti di tipo fossile o rinnovabile, quali gas naturale, bio-gas da digestione anaerobica o da discarica e diesel, in grado di produrre nei vari assetti generativi, cogenerativi e trigenerativi energia elettrica, termica, frigorifera e vapore. Particolarmente signifi cativa è l’attività di progettazione meccanica, che consente di integrare i motori endotermici standard con la componente termotecnica realizzando si-stemi compatti, semplici da manutenere ed effi cienti.

Grazie alle consolidate competenze in ambito elettrico ed elettrotecnico, SPK sviluppa sia la quadristica (comando, controllo e distribuzione) che il collegamento in emergen-za o in parallelo tra gruppi, così come con la rete elettrica.

Presso il centro produttivo di Possagno (TV) vengono svol-te le attività di produzione, assemblaggio e test delle mac-chine di generazione e cogenerazione, dei relativi quadri elettrici e componenti accessori.SPK Power Generation eroga servizi di manutenzione plu-riennali con l’impiego di moderni ed avanzati sistemi di telecontrollo che garantiscono i migliori risultati in termini di effi cienza e continuità di servizio degli impiantiSPK Power Generation appartiene al Gruppo AUSTEP, le-ader nella progettazione e realizzazione di impianti di produzione di biogas, biometano e trattamento acque in-dustriali. Le competenze di SPK e del Gruppo a cui appar-tiene, sono in grado di garantire una soluzione a 360° “su misura” affi dabile, referenziata e riconosciuta nonché un effi cace servizio di assistenza post vendita H24.

www.spkpg.com

SPK POWER GENERATION, GAMMA COMPLETA DI MACCHINE DI COGENERAZIONE

SPK POWER_energiaTec.indd 1 20/01/16 12:23

4TH GENERATION: LE A DING INNOVATION

CO-GENERATION

SPK POWER GENERATION SRL

Via Mecenate, 76/4520138 Milano

spkpg.comaustep.com

SPK is a multinational company based in Italy, recognized as one of the major players in the Distributed Power Generation Market. SPK Power Generation designs, manufactures and maintain Power Plants based on the technology of internal combustion engines. We offer a complete range of machines of the latest generation fuelled by natural gas, anaerobic digestion gas, landfill gas and diesel able to produce electricity, heat, cooling and steam in generative, cogenerative and trigenerative mode.

SPK è un’azienda multinazionale con sede in Italia, riconosciuta come uno dei principali operatori nel mercato della Generazione di Energia Distribuita. SPK progetta, realizza e mantiene centrali di Generazione di Energia Distribuita basate sulla tecnologia di motori endotermici.SPK Power Generation propone una gamma completa di macchine di ultima generazione, alimentate da fonti di tipo fossile o rinnovabile, quali gas naturale, biogas da digestione anaerobica o da discarica e diesel, in grado di produrre nei vari assetti generativi, cogenerativi e trigenerativi energia elettrica, termica, frigorifera e vapore.

112

FO

OD

&B

EVER

AG

E TE

CHN

OLO

GY

CA

TALO

GU

E20

16 e

ditio

n


WASTEWATER TREATMENT FOOD&BEVERAGE TECHNOLOGY

C &G Depurazione Industriale Srl in an Italian com-pany which has been designing and manufactur-ing plants for the treatment of industrial waste-

water around the world for over 40 years, with the aim of providing clients with a complete, personalised service which fully respects the environment around us.The company has a team of engineers and highly special-ised personnel that follows each client from the design to the construction and installation of the machine, includ-ing assistance and post-sales maintenance.C&G supplies machinery and support technologies to a wide variety of production sectors with one common objective: to treat and improve the quality of a particu-lar liquid. The main sectors where our products are ap-plied include galvanic industries, where it is possible to recover Chrome VI, Nickel, Brass, Copper and precious metals, while treating the wastewater produced by these industries. Other fi elds of application include graphic arts,

mechanical, chemical and petrochemical industries, phar-maceutical, cosmetic and food industries.

C&G is a pioneer in vacuum evaporation technology, and off ers a wide range of evaporator models all of which are characterised by low electrical consumption, the use of electricity or alternative energy sources, automatic 24 hour functioning, compact, robust design, constancy and quality in the results obtained, and absence of smell or va-pours. The principal objectives of the C&G are: to reduce the disposal costs and water consumption costs of a com-pany up to 90%, to recycle the water used in an industrial line; to recover precious metals, to eliminate any possible risk of sanctions by environmental control authorities, to modernise production and to improve the image of a company.

www.cgdepur.it

C&G, PLANTS FOR THE TREATMENTOF INDUSTRIAL WASTEWATER

C &G DEPURAZIONE INDUSTRIALE da 40 anni costru-isce impianti per il trattamento di refl ui industriali con lo scopo di fornire ai propri clienti un servizio

integrale e personalizzato nella tutela e nel rispetto del pa-trimonio ambientale, considerando l’acqua come risorsa preziosa e indirizzando il suo lavoro verso la realizzazioni di progetti che ne prevedano il recupero e il successivo im-piego.La ditta dispone di un team di ingegneri e di personale al-tamente specializzato che segue ogni cliente dal progetto e dalla costruzione della macchina, all’installazione (im-pianti chiavi in mano), fi no all’assistenza e alla manuten-zione post-vendita.C&G fornisce apparecchi e tecnologie di supporto a settori produttivi molto distanti tra loro, ma per raggiungere un obiettivo in comune: trattare e migliorare le condizioni di un determinato liquido. Pioniere nella tecnologia di eva-

porazione sotto vuoto, la C&G mette a disposizione dei suoi clienti una vasta gamma di modelli di Evaporatori, tutti caratterizzati da un basso consumo energetico, ali-mentazione con corrente elettrica di rete o energia alter-nativa, funzionamento automatico in continuo sulle 24 ore, robustezza e compattezza, affi dabilità e costanza nei risultati, e assenza di fumi e odori.

Gli obiettivi primari che C&G si propone sono: ridurre il costo di smaltimento ed il consumo di acqua della vostra azienda, riciclare l’acqua usata nella linea industriale, re-cuperare materie prime, eliminare ogni rischio di incorrere in costose sanzioni da parte delle Autorità preposte alla tutela dell’ambiente, modernizzare la produzione, e mi-gliorare l’immagine pubblica della vostra azienda.

www.cgdepur.it

C&G, IMPIANTI PER IL TRATTAMENTO DI REFLUI INDUSTRIALI

C&G DEPUR_energiaTec.indd 1 26/01/16 17:03

C&G Depurazione inDustriale srlVia i° Maggio, 53 - 50067 rignano s.arno - Firenze - toscana - italia

[email protected] - www.cgdepur.it - tel. +39 0558303450 - +39 0558303454 - Fax +39 0558303368

Proge

tto g

rafic

o:

C&G DEPURA ADV.indd 3 04/05/15 13:28

114

FO

OD

&B

EVER

AG

E TE

CHN

OLO

GY

CA

TALO

GU

E20

16 e

ditio

n


handling FOOd&BEVERagE TEChnOlOgY

M .H. Material Handling Spa is an Italian company founded in 1986, its mission is to engineer and produce turnkey solutions for material han-

dling of goods inside factories. In the first years of activ-ity it has consolidated its experience in the automotive and electromechanical markets, building free pallet lines to service work centers, machine tools and assembly sta-tions. After a few years it has shifted its attention to the food and pharmaceutical packaging markets that require higher throughput speeds and a greater number of devic-es and accessories to complete the conveyor system sup-plied. Buffering systems, mergers, sorters, elevators and lowerators, rotation groups and handling of the product, trays densters are just some of the special devices that M.H. has developed in the course of its activities.M.H. has a competent engineering department with ex-tensive experience that allows to support the demands of customers since the bidding stage by providing active

counseling for any need from the single application up to the complete turnkey plant, with the aim of improv-ing production efficiency and get faster return on invest-ment. It has also developed a comprehensive network of partners, working with the most important OEM manu-facturers of automatic and packaging machines both Italian and foreign, to offer fully integrated solutions that take into account the operational needs of each item of plant.M.H. also offers a complete range of conveyor systems in assembly kit, designed with modular design easily modi-fiable and that can be integrated with existing lines. The M.H. transport systems are compatible with most of the commercial components available on the market, offer-ing all the advantages of flexibility of an open construc-tion standards.

www.mhmaterialhandling.com

M.H. Material Handling Spa, Material Handling of goodS inSide factorieS

M .H. Material Handling Spa è un’azienda Italiana fondata nel 1986 con la missione di progettare e costruire impianti chiavi in mano di movimen-

tazione interna agli stabilimenti. Nei primi anni di attività ha consolidato la propria esperienza nel settore automo-tive ed elettromeccanico, con linee a pallet liberi per as-servimento a centri di lavoro, macchine utensili e stazioni di assemblaggio. Dopo pochi anni ha spostato la propria attenzione al mercato del confezionamento alimentare e farmaceutico che richiedono velocità produttive più eleva-te e un maggior numero di dispositivi ed accessori a corre-do dell’impianto di trasporto. Sistemi di accumulo, unifi-catori, smistatori, elevatori e discesori, gruppi di rotazione e manipolazione del prodotto, disimpilatori di vaschette sono solo alcuni dei dispositivi speciali che M.H. ha svilup-pato nel corso della sua attività.M.H. dispone di un reparto di progettazione competente e con vasta esperienza che le consente di supportare le richieste dei clienti fin dalla fase di offerta, fornendo con-

sulenza attiva per qualsiasi esigenza dalla singola appli-cazione fino all’impianto completo chiavi in mano, con l’obiettivo di migliorare l’efficienza produttiva e ottenere il più rapido ritorno dell’investimento. Ha inoltre svilup-pato una completa rete di partner, collaborando con i più importanti costruttori di macchine automatiche e di con-fezionamento Italiani ed esteri per poter offrire soluzioni perfettamente integrate e che tengano conto delle speci-fiche esigenze di funzionamento di ogni elemento degli impianti.M.H. propone inoltre una completa gamma di nastri trasportatori in kit di montaggio, progettati con design modulare facilmente modificabili e integrabili con linee esistenti. I sistemi di trasporto M.H. risultano compatibili con la maggior parte della componentistica commerciale disponibile sul mercato, offrendo tutti i vantaggi di flessibi-lità di uno standard di costruzione aperto.

www.mhmaterialhandling.com

M.H. Material Handling Spa , iMpianti di MoviMentazione interna

M.H HANDLING CAT 2016.indd 1 01/03/16 12:17


116

FO

OD

&B

EVER

AG

E TE

CHN

OLO

GY

CA

TALO

GU

E20

16 e

ditio

n


handling FOOd&BEVERagE TEChnOlOgY

PROXAUT was established in 1996 since the beginning developed software for automatic system,

software dedicated to management, contr ol and supervision in the plant focusing on the handling and later on warehousing.

PROXAUT answered to the growing up needs of the market, started to including the production of auto-matic guided vehicle with different type of navigation systems, laser, floor wire, magnetic spot.

During nearly 20 years of activity in logistics and expe-rience in the implementation of automated systems for factories producing consumer goods, they have given Proxaut the awareness of being a global provider of in-novative solutions for intra-logistics and material han-dling to optimize the supply chain of warehouses, and production facilities worldwide.

Strengths of Proxaut are modular solutions that can be installed step by step and this allows to implement the system without stoppage of production in existing plants, allowing you to improve efficiency both for the management of consumables for the activities of pro-duction and dispatch improving safety in the factory.

The technologies used in our solutions are fully de-signed, engineered, manufactured and installed by Proxaut. This means that we have a complete mastery of the system. We produce a wide range of AGV models, we have extended engineering capabilities in studying and simulating automatic systems we provide effective systems of groundbreaking technology, in efficiency, reliability and safety. We design customized systems for our customer refer-ence list and also for other industrial sectors where prod-ucts must be handled and transferred in automatic.

Today the changing market is increasingly demand-ing, for this reason we believe that integration, flex-ibility and security are key elements that respond to

the needs of today but can adapt to fol-low the growth and changing customer needs in the future.

PROXAUT draws of experience, expertise and know-how in automating handling systems and offers a comprehensive technical study with the scope of determining the appropriate integrated solution ac-cording to the customer’s needs.

CASE HISTORYPrevious situationWarehousing activities of picking up of the pallets through forklift drivers to operate in cold room at tem-peratures of -28° C. Operators, wearing protective work clothing to work at low temperatures, with the obliga-tion to stay at least 30 min. at pleasant temperature af-ter 90 min. permanent work in cold room.

Customer’ needs• Eliminate the thermal stress to operators.• Improve the efficiency of the work cycle.• Reduce operating costs.• Increasing security and quality.

Benefits• Efficiency. • Eliminating human mistakes origin,of damages to

the products and the enviroment.• Space and internal logistics optimization (work

flows).• Company’s innovative and technological growth. • Retun on investment (R.O.I.) in the medium / short

term.

Current situationThe customer with the installation of an automatic han-dling system with AGV, performs all the operations of wharehousing and picking up of the pallets inside the cold room with racks 6 meters high at -28 ° C.

www.proxaut.it

PROXAUT, SOLUTIONS FOR INTRALOGISTICSAND MATERIAL HANDLING

PROXAUT CAT 2016.indd 1 02/03/16 11:46

Proxaut srl: Via Caduti sul lavoro, 841013 Piumazzo - Castelfranco Emilia - Modena (Italy)Tel. +39 059 934939 - Fax +39 059 935527 - www.proxaut.com

automatic Guided Vehicle

Proge

tto g

rafic

o:

PROXAUT ADV CAT 2016.indd 3 01/03/16 15:16

118

FO

OD

&B

EVER

AG

E TE

CHN

OLO

GY

CA

TALO

GU

E20

16 e

ditio

n


handling systems FOOd&BeVeRage teChnOlOgy

T he quality of the project, a passion for innovation, attention paid to the client. Since 1976, these are the traits that distinguish Cidiesse Engineering, a

dynamic industry in the sector of internal handling and conveyor systems.With a consolidated presence both in Italy and abroad, Cidiesse is a model of a business that has grown through experience, evolving one step at a time thanks to con-stant investment in technical capacities and technological equipment, all with a view to offering the best in creative engineering and quality construction.Now we celebrate forty years in the business, Cidiesse in combining artisanal spirit with an industrial view for a range of high-profile solutions that include bucket elevators, con-veyor belts, rotating tables, and continuous loading eleva-tors for transporting raw materials and bulk products, such as, for example: pasta, dried fruit, flours and cereals, snacks, pet food, dairy products, seeds and feeds, mineral materi-als, chemical substances and pharmaceutical preparations.

The transport of the product without breakage or contami-nation also implies total safety for the operators. This has always been Cidiesse’s objective in seeking innovative and versatile solutions: an objective that has been reached re-peatedly through the perfecting of advanced systems that can be applied to many sectors, including food, beverage, and others. Paying attention to the client’s needs is a cor-nerstone of Cidiesse philosophy when engineering prod-ucts made-to-measure: every construction, functional, and performance detail is studied to meet individual and spe-cific client requirements.This is why Cidiesse is a strategic, reliable, and competent partner: an extraordinary capacity for standing by their clients through personalised technical-commercial consul-tations, the proposal of bespoken projects, high-level pro-duction, and punctual installation, auditing, and after-sales services.

www.cidiesse.com

CIDIESSE, WE CARE ABOUT YOUR PRODUCT

L a qualità del progetto, la passione per l’innovazio-ne, l’attenzione al cliente. Sono questi i tratti distinti-vi che contraddistinguono Cidiesse Engineering, di-

namica realtà industriale attiva dal 1976 nel settore degli impianti per la movimentazione interna.Con una presenza affermata in Italia e all’estero, Cidiesse è un modello d’azienda cresciuta attraverso l’esperienza, evo-luta a piccoli passi grazie a costanti investimenti in compe-tenze tecniche e dotazioni tecnologiche, finalizzati ad offrire la migliore creatività progettuale unita a qualità costruttiva.Quest’anno CIDIESSE ENGINEERING festeggia i quarant’anni d’attività, coniugando spirito artigianale e ottica industriale in una gamma di soluzioni d’alto profilo, che comprende ele-vatori a tazze, nastri trasportatori, tavoli rotanti ed elevatori a carico continuo, per il trasporto di materie prime e prodotti sfusi: ad esempio, pasta, frutta secca, semole e cereali, snack, latticini ed inoltre pet food, sementi e mangimi, materiali minerari, sostanze chimiche e preparazioni farmaceutiche.Il trasporto del prodotto senza rotture o contaminazioni

durante i passaggi, ovvero in totale sicurezza anche per gli operatori, è da sempre l’obiettivo che orienta Cidiesse nella ricerca di soluzioni innovative e versatili: un obietti-vo raggiunto più volte, attraverso la messa a punto di im-pianti evoluti che trovano applicazione in molteplici setto-ri, food, beverage e no food.L’attenzione alle esigenze del cliente è un caposaldo di Cidiesse nella progettazione su misura: ogni dettaglio costruttivo, funzionale e prestazionale viene studiato per rispondere a singole e specifiche richieste da parte dell’in-dustria cliente.Per questo Cidiesse è un partner strategico affidabile e competente: per la spiccata capacità di affiancare il cliente attraverso consulenze tecnico-commerciali personalizza-te, proposte progettuali su misura, produzioni ai massimi livelli ed un servizio puntuale di montaggio, collaudo e as-sistenza post-vendita.

www.cidiesse.com

cidiesse, ci PReNdiAMO cURA deL VOsTRO PROdOTTO

CIDIESSE CAT 2016.indd 1 01/03/16 14:29

CIDIESSE_Pagina 2016 esec.indd 1 28/10/15 09:23

120

FO

OD

&B

EVER

AG

E TE

CHN

OLO

GY

CA

TALO

GU

E20

16 e

ditio

n


handling systems FOOd&BeVeRage teChnOlOgy

Penta supplies:• off-loading systems for rawmaterials and additives supplied

by bags, jumbo bags and tankers;• aluminium and stainless steel silos and

tanks;• extraction aids for silos and hoppers;• pneumatic and mechanic conveying systems;• automatic de-dusting filters;• electronically controlled metering and dosing units;• batch and loss-in-weight electronic automatic process

scales;• devices for hazardous area, ATEX approved equip-

ments;• automatic feeding of mixers, kneader and dissolver;• fully computerized PLC/PC electric panel and manage-

ment systems supplied with dedicated software for driving and controlling the whole installations.

Expert in handling of:• crystal and milled sugar;• whole and skimmed milk powder;• wheat flour;• cocoa powder.

penta.piovan.com

Penta, solutions for advanced turnkey raw materials automation systems

PENTA CAT 2016.indd 1 05/02/16 17:47

Penta is a worldwide one-stop supplier of solutions for advanced turnkey raw materials automation systems.

Penta supplies:• off-loading systems for raw

materials and additives supplied by bags, jumbo bags and tankers;

• aluminium and stainless steel silos and tanks;

• extraction aids for silos and hoppers;• pneumatic and mechanic conveying

systems;• automatic de-dusting filters;• electronically controlled metering

and dosing units; • batch and loss-in-weight electronic

automatic process scales;• devices for hazardous area, ATEX

approved equipments;• automatic feeding of mixers,

kneader and dissolver;• fully computerized PLC/PC electric

panel and management systems supplied with dedicated software for driving and controlling the whole installations.

Expert in handling of:• crystal and milled sugar• whole and skimmed milk powder• wheat flour• cocoa powder

Debagging area

Silos filling systems

Centrifugal sifter

Engineering

Dosing systems

Turnkey plant

Penta_AvvisoA3_OK.indd 2-3 24/07/15 14:35

Via Uccellino, 75/7744028 Poggio Renatico (FE) - Italy

penta.piovan.com

PENTA ADV CAT 2016.indd 3 05/02/16 17:46

122

FO

Od

&B

eVeR

ag

e te

Chn

OlO

gy

Ca

talO

gU

e20

16 e

ditio

n


daiRy teChnOlOgies FOOd&BeVeRage teChnOlOgy

c ad Project Srl projects, manufactures and installs machines and plants for dairy and food industry. It is a dynamic company that works closely with

the client as to meet every requirement. Every project is a perfect tailor made!

It has a trained staff and qualifi ed collaborators who are always ready to face new challenges, adapting to evolv-ing technology and market. Machines and plants are modern, engineered and manufactured with practicality mind and limited maintenance. Thanks to use innovative and technological tools, Cad Project can grant tailored solutions.

The entire production cycle is done at the factory in San Pietro Mosezzo, allowing a 360° control of all the work phases.

Today Cad Project, leader in ultrasonic cutting and fi xed weight, boasts a wide range of machines and plants. For the portioning it produces manual machines, semi-auto-matic machines and fully automatic lines. Depending on the type of cheese to be cut, can be used diff erent types of blades; from traditional blades in stainless steel to the innovative and increasingly used ultrasonic blades, which allow a precise and clean cut. It is also possible to cut at fi xed or variable weight, placing the slices into plastic containers and the connecting with packaging lines. For the seasoning diff erent machines are manufactured such as brining and brushing machines, dry salting machines, punching machines and peelers machines.

To fi nd out in detail all machines and plants of Cad Pro-ject log in the web site www.cadproject.it, or to follow them on the youtube channel.

cad ProJect, a Perfect tailor made service!

c ad Project Srl progetta, realizza e installa macchi-ne e impianti per l’industria casearia e alimentare. È un’azienda dinamica che lavora a stretto contat-

to con il cliente, in modo da soddisfare ogni sua esigen-za. Ogni progetto è studiato su misura. Un perfetto tailor made! Cad Project si avvale di uno staff qualifi cato e di collabo-ratori scelti che sono sempre pronti ad affrontare nuove sfi de, adeguandosi alla continua evoluzione della tecnolo-gia e del mercato. Le macchine e gli impianti sono moder-ni, progettati e costruiti con criteri di praticità, di limitata manutenzione e di riduzioni dei costi produttivi. L’uso di strumenti tecnologici per la progettazione e la costruzione hanno permesso a Cad Project di affermarsi nel settore ali-mentare, specializzandosi nel settore caseario.

L’intero ciclo di produzione avviene nello stabilimento di San Pietro Mosezzo, permettendo un controllo a 360° di tutte le fasi.

Oggi Cad Project, leader nel taglio a ultrasuoni e a peso fi sso, vanta una vasta gamma di macchine e impianti. Per quanto riguarda la porzionatura, Cad Project realiz-za macchine manuali, semi-automatiche e linee comple-tamente automatiche. A seconda della tipologia di for-maggio da tagliare possono essere utilizzate diversi tipi di lame; dalle lame tradizionali in acciaio inox alle innovative e sempre più utilizzate lame a ultrasuoni, che permettono un taglio preciso e pulito. È inoltre possibile il taglio a peso fi sso o variabile, se si preferisce o meno l’inserimento in va-schetta e l’allineamento con le linee di packaging.

Per la stagionatura vengono prodotte invece diverse mac-chine come spazzolatrici, salinatrici, salatrici a secco, fora-trici e pelatrici.

Per scoprire dettagliatamente tutti gli impianti rea-lizzati da Cad Project Vi invitiamo a collegarVi al sito www.cadproject.it, o al canale YouTube.

cAd PROJecT, A PeRFecT TAiLOR MAde seRVice!

CAD PROJECT - CAT 2016 tecnLATTIERO.indd 1 14/12/15 17:42

124

FO

Od

&B

eVeR

ag

e te

Chn

OlO

gy

Ca

talO

gU

e20

16 e

ditio

n


daiRy teChnOlOgies FOOd&BeVeRage teChnOlOgy

e stablished in 1881, SORDI has played up since then a leading role in the milk fi eld, position still held thanks to the continuous search for innovative solu-

tions. SORDI was one of the fi rst companies in the world to off er the indirect heat exchange at high temperature for the UHT milk treatment, developed and realized perfected innovative lines for the production of cheese, mascarpone, ricotta, butter and margarine. Sordi used its experience and knowledge to make vanguard plants in related areas, such as the production and heat treatment of juices, ice cream mix, bakery and pastry products. During the last years Sor-di a special attention was paid to the industry of vegeta-ble milks (soy, rice and other cereals) designing and real-izing effi cient and fl exible lines for the extraction of milk, for UHT milk processing (white or fl avored milk), for the production of tofu and yoghurt. Sordi production range therefore includes: Milk reception and recombining units,

Indirect type, HTST, ESL pasteurizing lines, Indirect type UHT sterilizing lines, Sweetened, condensed milk lines, Sweetened and condensed milk production lines, Prepara-tion and processing lines for creams, puddings, ice-cream mixes, Fermented milk production lines (set and stirred yo-ghurt, Kefi r, Labneh, Laban etc.), Vegetable cream produc-tion lines, Preparation lines for fruit juices and drinks, Con-centration lines by membranes (MF, UF, RO), Production lines for soft cheese, Production lines for pressed and hard cheese, Production lines for pasta fi lata cheese, Production lines for fresh cheese, Production lines for ricotta, Lines for “analogue cheese” (cheese from proteic concentrates), Ex-traction and production line for vegetable milks (soy, rice, oats etc.), Production lines for Tofu (soy cheese), CIP chemi-cal cleaning lines for single units and plants.

www.sordi.com

sordi, comPany’s caPaBility and vitality

F ondata nel 1881, la Sordi ha giocato fi n dalla sua nascita un ruolo di primo piano nel mondo del lat-te, posizione mantenuta fi no a oggi grazie alla ri-

cerca continua di soluzioni innovative.SORDI è stata una tra le prime società nel mondo ad offri-re lo scambio termico indiretto ad alta temperatura per il trattamento UHT del latte, ha sviluppato e messo a punto linee innovative per la produzione di formaggi, di mascar-pone e di ricotta, di burro e di margarina. Ha utilizzato la sua esperienza e la sua conoscenza per realizzare impianti all’avanguardia in settori affi ni, quale la produzione e il trattamento termico di succhi di frutta, di gelati, di prodot-ti da forno e pasticceria.

Negli ultimi anni Sordi si è dedicata con particolar impe-gno all’industria del latte di soia, di riso e di altri cereali, progettando e realizzando linee effi cienti e fl essibili per l’e-strazione del latte, per il trattamento UHT di latte bianco o aromatizzato, per la produzione di tofu e per la produzio-ne di yogurt.

Pertanto la gamma di produzione Sordi prevede: Unità di ricevimento e ricostituzione del latte, Unità di pastorizzazione HTST, ESL di tipo indiretto, Linee di steri-lizzazione UHT di tipo indiretto, Linee di produzione latte zuccherato e condensato, Linee di preparazione e produ-zione panne, budini, miscele da gelato, Linee di produzio-ne latte fermentato (yogurt cremoso e compatto, Kefi r, Labneh, Laban ecc.), Linee di produzione panna vegetale, Linee di preparazione succhi di frutta e bevande, Linee di concentrazione mediante membrane (MF, UF, RO), Linee di produzione formaggi molli, Linee di produzione formaggi pressati, Linee di produzione formaggi a pasta fi lata, Linee di produzione formaggi freschi, Linee di produzione ricot-ta, Linee di produzione di “analogue cheese” (formaggio da concentrati proteici), Linee di estrazione e produzione latte vegetale (latte di soia, riso, avena, ecc.), Impianti di produzione Tofu (formaggio di soia), Impianti di lavaggio chimico CIP per singole macchine e per impianti.

www.sordi.com

sORdi, cOMPeTeNZA e diNAMiciTÀ

SORDI - CAT 2016 tecnLATTIERO.indd 1 15/01/16 18:12


126

FO

Od

&B

eVeR

ag

e te

Chn

OlO

gy

Ca

talO

gU

e20

16 e

ditio

n


hOReCa FOOd&BeVeRage teChnOlOgy

o rved S.p.A. is a leading company in the design, manufacturing and distribution of state-of-the-

art, high-quality vacuum packing ma-chines that are entirely Made in Italy. The company has been off ering for many years a line of external vacuum packing machines, a vast range of vacu-um chamber packing machines, trays thermosealing ma-chines, vacuum bags, as well as sous-vide accessories and systems.

Orved’s products stand out for their very high quality lev-els and cutting-edge technological solutions. The reliabil-ity and robustness of its machines have been recognized and confi rmed by a thirty-year presence in world markets.Each and every one of Orved’s machine complies with the strictest international standards and is CE-ETL-ETL Sanita-tion certifi ed. Orved’s entire internal quality management system, both of its packing machines as well as of its vac-uum bags, is ISO 9001:2008 certifi ed.

All of its machines enjoy warranties combined with a fast and professional assistance, which is also ensured at an international level. Innovation is one of the most impor-tant value that distinguishes the company from the oth-ers present in the vacuum packing sector.

Recently Orved has designed and developed the fi rst vac-uum packing machine able to vacuum pack products for the space. Orved is proud to have designed “Orved Argo-vac”, the packing machine that vacuum packs foodstuff s for astronauts. This machine was also used for vacuum packing foods sent into space for the “Futura Mission”, to which, among others, the Italian astronaut Samantha Cristoforetti took part.

Orved, for this mission, produced both the Orved Argovac vacuum packer as well as the special vacuum bags suit-able for the packaging of the astronauts’ food.

For 2016 Orved has developed a lot of product innova-tions that cast new light on the preservation, sealing and cooking fi eld.

The latest product is the new Bright Line characterized by a refi ned and innovative design, stainless steel bodywork and an exclusive Wi-Fi device present within the machine. The Wi-Fi allows the vacuum packing machine to commu-nicate directly with the user.

Thanks to the Wi-Fi technology the user can benefi t of

many advantages such as: remote pro-gramming by means of Pc, Tablet and Smartphone - fast technical assistance - automatic update of the machine software and analysis of all machine functions. The

new Bright line has been enriched with two new vacuum packing machines: Cuisson 31 and Cuisson 41. These two brand new machines represent the real innovation in the vacuum packing of liquid products thanks to the pat-ented vertical chamber and the 9 deaeration programs and 11 preset programs, such as sauces, cream, ice-cream bases and pastry bases.

These new programs make the vacuum packing of liquid products easier than ever and all people can be able to vacuum pack products even without the Chef supervi-sion, thanks to the automatism of the programs.

Orved is well known for satisfying all people’s needs, even the most diffi cult. Evox 25 is the new challenge that Orved has won with its new machine, Evox, the smallest vacuum packing machine with maximum vacuum performance. Fit for any space even in the smallest kitchen, Evox 25 is ideal for small restaurants, delicatessens, bars and all small shops.

Orved is once again pleased to present an end result of absolute excellence and it is proud to launch in the mar-ket both the Evox 25 stainless steel built and its limited edition Evox 25 F1, characterized by an exclusive red col-our. Evox 25 F1 is the ideal vacuum packing machine for all those people looking for a fast machine yet with a dis-tinguishing avant-garde design.

In the thermosealing fi eld, Orved presents a new trays thermosealing machine, VGP 60n Skin. Vgp 60n Skin, is the new machine which renovates the concept of vacuum packing and sealing thanks to its exclusive “Skin Eff ect”: a particular system of vacuum packaging which enables a specifi c fi lm fi t for food contact to perfectly adhere to the product like a “second skin”.

With VGP 60n Skin any product can be packed and their freshness, quality and above all aesthetic aspect better preserved.

Nowadays Orved is growing day by day and has increased its presence in the world in 121 countries with 1248 deal-ers and importers.

www.orved.it

orved, costant Professionalism and innovation

ORVED CAT 2016_interaHoreca.indd 1 14/01/16 15:40

Evox 25

VGP 60n SKIN

SKIN Effect

With VGP 60n SKIN any product can be vacuum packed and their

freshness, quality and above all aesthetic aspect better preserved!

The new vacuum packing machine can be fit for any space, even in the smallest kitchen.Evox 25 is solid, ergonomic and represents Orved’s answer to all those people looking for a simple and fast machine yet with a distinguishing avant-garde design.

The new Bright line is equipped with an innovative Wi-Fi device which allows the machine to communicate directly with the user by means of PC, Tablet and Smartphone.

ORVED S.P.A.Via dell’Artigianato, 30 - 30024 Musile di Piave (VE)ITALIA - tel: +39.0421.54387 - fax: +39.0421.332295www.orved.it - e-mail: [email protected]

facebook.com/Orved.Macchine.Sottovuoto

The machine is provided with NEW DEAERATION PROGRAMS for pastry and ice-cream bases and the NEW PRESET VACUUM PROGRAMS which are capable of increasing the quality of vacuum packaging of liquid and soft products.

Evox 25F1

Cuisson 31

Be SMARTwith ORVED!

Cuisson 41hCuisson 41


128

FO

Od

&B

eVeR

ag

e te

Chn

OlO

gy

Ca

talO

gU

e20

16 e

ditio

n


BeVeRage FOOd&BeVeRage teChnOlOgy

t he automatic washing of returnable bottles has to-day reached a level of high specialization. AKOMAG is a young, � exible and dynamic company that bas-

es its organizational strategy on Customer Satisfaction, the quality of its systems, its assistance services and techno-logical innovation.

The company has been working in the bottling sector for many years, and boasts a long construction experience, which allows it to guarantee maximum yields for the client, together with the highest level of operational practicality, minimum working costs and long lasting equipment, due mainly to the fact that the machines are built using certi-� ed, top quality materials.

This experience and the company research are made avail-able to the clients who demand only the best. The simple, modular structure of the company’s production range has allowed for the progressive increase in the functions and level of sophistication, including special washing and sanitization sections, automatic process parameter control,

system security devices, energy saving devices, the reduc-tion of exhaust waste and automatic sanitization of the most important parts in terms of hygiene.

During the design the utmost attention has been paid to ensuring the adoption of all details for health protection and operator accident prevention, along with all the nec-essary protective devices for noise reduction. Great e� orts have also been made to reduce the size of these tradition-ally large and awkward machines, in order facilitate space optimization in bottling plants.

The AKOMAG production range includes bottle washers, rinsers and sterilizers for glass and PET bottles and for large 3-4 and 5 gallon bottles, crate washers and various comple-mentary machine accessories. The company’s operational site is in Soragna (PR), and has a covered surface area of more than 1,500 m2 for production, plus a spare parts ware-house and technical, administrative and sales o� ces.

www.akomag.com

akomaG, Bottle wasHinG

i l lavaggio automatico delle bottiglie di recupero, ha raggiunto ormai un livello di alta specializzazione.AKOMAG è un azienda giovane, fl essibile e dinamica

che basa la sua strategia organizzativa sulla soddisfazio-ne dei Clienti, sulla qualità degli impianti, del servizio assi-stenza e delle innovazioni tecnologiche.

Opera da diversi anni nel settore dell’imbottigliamento e vanta una lunga esperienza costruttiva, tale da ottenere e garantire al cliente il massimo rendimento, un’ottima pra-ticità di conduzione, costi d’esercizio minimi ed una lunga durata dovuta principalmente al fatto che le macchine sono costruite con materiali di prima qualità, certifi cati.Tali esperienze e ricerche sono così a disposizione per clien-ti che vogliono il meglio.

La struttura semplice e modulare della sua produzione, ha consentito di aumentare proggressivamente le funzioni e il li-vello di sofi sticazione, inserendo sezioni di lavaggio speciali e di sanifi cazione, il controllo automatico dei parametri di pro-cesso, sistemi di sicurezza per l’impianto, il recupero energe-

tico, la riduzione degli scarichi e la sanifi cazione automatica delle parti più importanti dal punto di vista igenico. Durante la fase di progettazione, non si è minimamente sottova-lutato la necessità di adottare tutti gli accorgimenti atti alla salvaguardia della salute e alla prevenzione dei rischi dell’operatore, adottando tutte le protezioni necessarie anche in riguardo della riduzione del rumore. Notevole impegno è stato rivolto alla riduzione delle dimensioni delle macchine, tradizionalmente piuttosto grandi ed in-gombranti, per risolvere i problemi di ottimizzazione degli spazi negli impianti di imbottigliamento.

La produzione AKOMAG comprende lavabottiglie, sciac-quatrici e sterilizzatrici per bottiglie in vetro, PET e per boc-cioni da 3-4 e 5 galloni, lavacasse ed accessori vari com-plementari alle macchine. La sede operativa è situata nel comune di Soragna (PR) con una superfi cie coperta di oltre 1.500 m2 adibita a produzione più un magazzino ricambi, uffi cio tecnico, amministrativo e commerciale.

www.akomag.com

AKOMAG, LAVAGGiO BOTTiGLie

AKOMAG - CAT 2016.indd 1 28/01/16 17:00

ITALIAN FOOD MACHINES

Новостикраткие новости

AKOMAG ADV IFM 2-14.indd 1 26/02/15 17:49

130

FO

OD

&B

EVER

AG

E TE

CHN

OLO

GY

CA

TALO

GU

E20

16 e

ditio

n


bottling FooD&bEVERAgE tECHnologY

T he role of producers of bottling and packaging technology, such as SMI, is particularly important

for the success of companies operating in the food & beverage sector. Success that can only be achieved through an optimal combination of competitiveness, cost-effectiveness, effi-ciency and environment-friendliness of the manufacturing process. Creating systems and machinery that allow the achievement of that ideal “blend” is the main goal of SMI since the very beginning of its activity, dating back to 1987.

With over 5,600 packaging machines installed worldwide, Italy-based SMI ranks among the top manufacturers of bottling & packaging machines as well as of systems for food & beverage, household cleaning and personal hy-giene, chemical and pharmaceutical products, able to meet production needs up to 36,000 bottles per hour. SMI is a leading manufacturer of automatic packers for the secondary packaging in shrink film and corrugated cardboard and one of the top makers of rotary stretch-blow moulders for the production of PET bottles. 97% of SMI systems, that are entirely produced in Italy, is exported to over 130 foreign countries.

In almost 30 years of business, SMI has always distin-guished itself on the market for the high level of tech-nological innovation and operating flexibility of its range of machines and systems, that is constantly up-graded and expanded thanks to an intensive activity of Research & Development.These are the principles on which SMI most innovative studies are based and that came into effect in the reali-zation of the new ERGON series of primary and second-ary packaging machines.Ergonomics, technology, robustness and modular-ity are only some of the elements featuring the new ERGON series.

SMI S.p.A., with its product divisions for blowing/filling and capping system and end of line packaging ma-chines, is the flagship brand of the cluster of companies belonging to SMIGROUP S.p.A.

SMI and the importance of R&D invest-ments Investments in advanced technology and breakthrough innovation are the main driving force for the success of SMI in the world. In order to maintain and further

develop its technical expertise, SMI annually invest a significant share of its turnover in projects of Research & Development. In more than 25 years, those foregoing investments have enabled SMI to market a wide array of innovative bottling and packaging machines and systems whose high tech features and solutions have led in many cases to set new industrial standards in this sector.

The commitment of SMI to the environmental protec-tion is also proved by the fact that the company is UNI EN ISO 14001:2004 certified and that, therefore, an machine-manufacturing industry can be run in perfect harmony with the nature and the needs of an ever-changing market.

Complete solutions for any bottling & packaging needSMI designs and manufactures complete bottling & packaging systems for output needs from 3,600 to 36,000 bottles per hour requiring high efficiency, broad operating flexibility, low energy consumption and a good quality/price ratio.

After careful analysis of the customer’s needs and the generation of feasibility study, a team of experts draws up a customized proposal in collaboration with the customer’s staff in order to fine tune the scope of supply. The range of turnkey systems proposed by SMI includes entry-level and compact lines as well as full optional and complex solutions, with a wide array of interme-diate products that can satisfy customers’ current and future requirement in terms of output rate, product to be packaged, process automation and facility size.

www.smigroup.it

SMI: hIgh TeChnology, ConSTanT InnovaTIon anD Top flexIbIlITy

SMI GROUP CAT2016.indd 1 03/02/16 16:13

132

Fo

oD

&b

EVER

Ag

E tE

CHn

olo

gY

CA

tAlo

gU

E20

16 e

ditio

n


bEVERAgE FooD&bEVERAgE tECHnologY

W ith the knowledge and the production plant in San Zenone degli Ezzelini (TV), as well as an established worldwide network of agents,

distributors and assistance, VLS Technologies is able to provide a wide range of technical solutions for liquid pro-cessing.

From consulting and designing, to testing and post- ‐sa-les service spare and spare management, VLS Tech. is an reliable partner for all sectors of liquid processing.

The core business of the VLS Tech. is developing techno-logical solutions for liquid � ltration.

This is our area of expertise. We customize � ltration solu-tions for each customers’ individual needs.

Oenological, brewing, food and beverage, and chemi-cal sectors are constantly evolving. Solutions for liquid

� ltration require constant research, development and innovation.

VLS Tech. is a leader in providing solutions for liquid � l-tration. Not only do we provide � ltration technologies for these sectors, but we are also able to design and develop ad hoc solutions based on speci� c needs, new products and new markets.

Historically, the oenological sector has always been our target. For that reason, VLS Technologies is able to design and supply the solution for the entire line, from vineyard to bottle.

Thanks to familiarity with the world of wine and to the wide net of technological partners, we know how to pro-pose the best solution for any wine processing need.

www.velo-technologies.com

velo aCCIaI, WIDe Range of TeChnICal SolUTIonS foR lIQUID pRoCeSSIng

c on le competenze e gli impianti della sede produt-tiva di San Zenone degli Ezzelini, nella Provincia di Treviso, e grazie a un network internazionale di

agenti, rivenditori autorizzati e assistenza, VLS Technolo-gies è in grado di offrire un servizio a 360 gradi nelle solu-zioni tecnologiche per i processi di lavorazione dei liquidi.

Dalla consulenza e progettazione attenta alle esigenze dei diversi settori serviti, fi no al collaudo, all’assistenza post- vendita e alla gestione dei ricambi, VLS Technologies si propone come referente unico e partner tecnologico esperto, affi dabile e completo.

Il settore d’eccellenza di VLS Technologies è quello dello sviluppo di soluzioni tecnologiche per la fi ltrazione dei liquidi: in quest’ambito sappiamo esprimere al massimo tutte le nostre competenze e il nostro know- how. Realiz-ziamo soluzioni personalizzate per la fi ltrazione generate dalle reali esigenze del cliente.

I settori dell’enologia, del brewery, del food & beverage e dell’industria chimica sono in continua evoluzione, e le solu-zioni tecnologiche adottate per la fi ltrazione dei liquidi richie-dono costanti processi di ricerca, sviluppo e innovazione.

VLS Technologies è azienda leader nel settore delle soluzio-ni per la fi ltrazione, in grado non solo di fornire tecnologie di fi ltrazione per questi settori, ma anche di progettare e sviluppare soluzioni ad hoc basate su esigenze specifi che, nuovi prodotti, nuovi mercati.

Il settore enologico è il target principale di VLS Technolo-gies, infatti siamo in grado di progettare e realizzare la fi -liera dalla vigna alla bottiglia. Grazie alla familiarità con il mondo del vino e all’ampio network di partner tecnolo-gici, sappiamo proporre sempre la miglior soluzione per qualsiasi esigenza di wine processing.

www.velo-technologies.com

VeLO AcciAi, sOLUZiONi TecNOLOGicHe PeR i PROcessi di LAVORAZiONe dei LiQUidi

VELO ACCIAI- CAT 2016.indd 1 10/12/15 11:32

VELO ACCIAI S.r.l. Via S. Lorenzo, 42 Loc. Ca’ Rainati | S. Zenone degli Ezzelini (TV) Italia T+39 0423968966 | [email protected] | www.velo-technologies.com

w w w. ve l o - te c h n o l o g i e s . co m

FROM NOW ON YOU’LLHAVE ONE PROBLEM LESS

Thanks to our fully automatic crossflow filtration plants you will be able to treat all kinds of products: wine, beer and juices with polymeric membranes; products with an high concentration of suspended solids -like lees- with our plants with stainless steel membranes.

134

FO

OD

&B

EVER

AG

E TE

CHN

OLO

GY

CA

TALO

GU

E20

16 e

ditio

n


filling fOOD&BEVERAgE TECHnOlOgY

F RAMAX specializes in the supply of machinery and complete “Turn Key” production lines for the bot-

tling and packaging industry, covering primarily the beverage field but also ca-tering for special needs in the food and chemical sectors.

Our main objective is to provideCustomers promptly with a custom-made solution, spe-cifically designed to protect and guarantee the quality of the finished product with the use of the highest and most up-to date technology.

Framax can supplying lines to suit a wide range of prod-ucts such as mineral water, carbonated soft drinks, wine, beer, edible oils, mixed alcoholic beverages, liqueurs, fruit juices, sauces etc., into traditional or modern packaging, such as bottles made of Pet, Pen, Glass, HDPE, cans, bag-in box-etc.

The key to our success is the “know how” gained in over 30 years of experience in this industry and the ability to supply equipment performance, competitive pricing and efficiency of after sales service and support.

Framax can supply the following:• Depallettising systems suitable for glass bottles, PET

bottles, cans, jars etc.• Synthetic bottle production (PET, PEN, PVC, etc.), sin-

gle or double stage Pet blow-moulding and extrusion moulding.

• Unscramblers for plastic bottles complete with silo stor-age systems and automatic extraction conveying to the bottling line.

• Bottle washing machines for returnable glass bottles.• Liquid rinsing/sterilizing machines with one or more treatments.• Filling machines using various technologies according to the products to be processed.

• Capping machines for all types of closures and seals.• Labelling machines suitable for all kinds of modern

packaging.• Can filling and packaging lines.• Packaging and palletizing machines.• Wrap around pallet wrapping.• Factory automation technologies.• Water treatment plants.• Beer brewing plants.• Q.C. Inspection equipment.• Premixes, ozone generators, carbonators, syrup plants,

cap elevators, date coding, pasteurizing machines, con-veying and handling systems.

• Project planning and Engineering of complete plants.

Project planning & engineering The main key to our success is the capability to offer cus-tomers a complete tailor-made solution according to specific technical requirements, starting from the initial budgetary proposal to the final project plan designed to fit within the space availability but also to fit the required budget, always keeping in mind the importance of look-ing after the product to be packaged.

Primary objective is in fact to care about “THE PRODUCT”, making sure that its original characteristics are not altered throughout the bottling & packaging process.

www.framax.com

FRAMAX, yOuR PARtneR in the wORld

FRAMAX CAT2016.indd 1 26/05/16 16:22

Bott

ling P

ack

agin

g

Tecn

olo

gie

s

Fully automatic electronic canning machineRinsing, isobaric filling and seamingBeer, Cider, Soft Drinks, Wine, etc.

Sturdy, Compact, Electronic, Reliable

R I N S I N G

S E A M I N G

FRAMAX srl - Via Marlianese, 31 51030 Serravalle Pistoiese (PT) ItalyPh./Fax +39 0573 51435 - Fax +39 0573 079907email: [email protected]

For additional information visit: www.framax.com

Output: up to 1.500 cans hour

SMALL CANNING

FILLIN

G M

ACH

INE

FOR K

EYKEGS

Beer, W

ine, Ci

der, S

oft

drinks

System

cam

pb

ella

dv.

com

118

16


136

FO

OD

&B

EVER

AG

E TE

CHN

OLO

GY

CA

TALO

GU

E20

16 e

ditio

n


Dosing system FooD&BeVeRAge teCHnoLogy

TS arises from the desire of some professionals to give quality answers to the problems of its clients. TS designs, manufactures and installs complete

pipelines for the storage and transfer of cryogenic liquids and for the production and distribution of the relative gas, such as Nitro-gen, Oxygen and Argon, and other gases such as Carbon Diox-ide, Nitrogen Oxide, Methane. Based on innovative and flexible concept, combined with design criteria focused on standardiza-tion and modularization, but that does not rule out the customi-zation required by the context, TS supports in a distinctive man-ner and identifies the most viable solutions for every Customer.Our product lines:• Transfer and Delivery of Cryogenic Liquids.• Distribution of Industrial, Medicinal and Special Gases.• Gas mixing systems.• Equipment: for cryogenic applications in the food industry,

in different production lines: cryogenically grinding - cheese pasta processing - ice cream / frozen desserts production - Cooling / freezing foods - Bottling.

TS has therefore created a series of equipments for the dosage of liquid nitrogen in drops, characterized by:• Small size and easy to use.• Metering valves and reserve accumulation liquid nitrogen

and framework.• Simple Installation even on existing systems.

They are based on a simple chemical principle:• Nitrogen is the main component of atmospheric air (78%).• 1 gram of LIQUID NITROGEN = 0.8 liters normal NITROGEN

GAS (gas volume 700 times).

The generated positive effects are many:• Elimination of oxygen, preserving over time the organoleptic

characteristics of the product.• Increased product shelf life.• Increased mechanical strength of the vessel.• Cost Savings. For any information visit our website: www.tsitalia.it

TS, equipmenTS for The doSage of liquid niTrogen in dropS

TS nasce dalla volontà di alcuni professionisti di dare risposte di qualità ai problemi dei propri Clienti. TS progetta, realizza ed installa impianti completi per

lo stoccaggio e il trasferimento dei liquidi criogenici e per la pro-duzione e distribuzione dei relativi gas, quali Azoto, Ossigeno e Argon, e di altri gas come Anidride Carbonica, Protossido di Azo-to, Metano. Logica innovativa e flessibile, unite a criteri di proget-tazione in cui sono privilegiati i concetti di standardizzazione e modularizzazione, ma che non escludono la personalizzazione richiesta dal contesto, consentono di supportare in modo distin-tivo i Clienti e di individuare le soluzioni più vantaggiose.Le nostre linee di prodotto:• Trasferimento ed Erogazione dei Liquidi Criogenici.• Distribuzione dei Gas Industriali, Medicinali e Speciali.• Sistemi di miscelazione gas.• Apparecchiature: per applicazioni criogeniche nel settore

alimentare, in diverse linee di produzione: - Criomacinazione - Lavorazione paste - Produzione gelati/semifreddi - Raffred-damento/surgelazione alimenti - Imbottigliamento.

TS ha perciò creato una serie di attrezzature per il dosaggio di azoto liquido in gocce, caratterizzati da:• Dimensioni ridotte e facile da utilizzare.• Valvola dosatrice e riserva di accumulo azoto liquido e quadro.• Istallazione semplice anche su impianti già esistenti.

Si basano su un principio chimico semplice:• L’Azoto è il principale componente dell’aria atmosferica (78%). • 1 grammo di AZOTO LIQUIDO = 0,8 litri normali di AZOTO

GAS (volume di gas 700 volte superiore).

Gli effetti positivi generati sono molti:• Eliminazione dell’ossigeno, preservando nel tempo le caratte-

ristiche organolettiche del prodotto.• Aumento della vita commerciale del prodotto.• Aumento della resistenza meccanica del recipiente • Risparmio di costo sui recipienti.

Per qualsiasi informazione visita il nostro sito: www.tsitalia.it

TS, aTTrezzaTure per il doSaggio di azoTo liquido in gocce

TS ITALIA - CAT 2016.indd 1 22/02/16 17:40

TS ITALIA ADV adattata.indd 3 08/10/15 14:21

TECHNOLOGY FOR BOTTLING INDUSTRY

...eliminates Oxigen ...reduces the plastic amount...with benefits ..for the environment

...increases the resistance



...removes jams and deformations

LIQUID NITROGEN DRIPPERTSV. DG. 2.2.5L



TS ITALIA ADV DT 4-15.indd 3 23/11/15 11:26

138

FO

OD

&B

EVER

AG

E TE

CHN

OLO

GY

CA

TALO

GU

E20

16 e

ditio

n


CLEANING HEADS FOOD&BEVERAGE TECHNOLOGY

T hanks to a programme of product optimisation, resulting from a careful and meticulous client feedback process, the 1980s and 1990s witnessed

the development, by the Officina Meccanica Bolondi lva-no, of a large number of technical innovations in the wa-shing head production sector.A comprehensive range of low and highpressure products designed to meet the needs of firms looking for products that are perfectly suited for sanitising and cleaning, from the smallest of containers to the largest of spaces.

Particular care and attention has been devoted to the

aspects of integration with industrial systems and machi-nes, above all in the food, pharmaceutical, chemical, wine producing, transportation sectors, and in the urban and building cleaning industry, by using materials that are compatible with a large variety of products.

It is impossible to overlook the detailed finishing touches that are applied to each and every aspect, hallmarks of truly innovative designs, and that are veritable technolo-gical treasures in each of the individual components.

www.bolondi.com

HEADS FOR INDUSTRIAL WASHING OF CONTAINERS

L’ Officina Meccanica Bolondi lvano sviluppa negli anni ‘80 e ‘90, grazie ad un processo di ottimizza-zione della produzione nato da un attento e pun-

tiglioso feed-back con i loro maggiori clienti, una grande quantità di innovazioni tecnologiche nel settore della pro-duzione di testine di lavaggio.

Una completa gamma di prodotti per bassa ed alta pres-sione in grado di soddisfare la richiesta di tutte le aziende che necessitano di un prodotto ideale alla sanificazione e alla pulizia, dal piccolo contenitore fino ad arrivare al grande ambiente.

Particolarmente curato è stato anche l’aspetto dell’inte-grazione con macchine e impianti industriali soprattutto nel settore alimentare, farmaceutico, chimico, enologico, dei trasporti, della nettezza urbana ed edile, con un impie-go di materiali compatibili con i più svariati prodotti.

Non può essere tralasciata la particolare rifinitura di ogni singolo aspetto, che caratterizzati da un vero e proprio de-sign innovativo sono veri e propri gioielli, tecnologicamen-te avanzati in tutti i singoli componenti.

www.bolondi.com

MACCHINE PER LAVAGGIO INDUSTRIALE DI INTERNI

BOLONDI IVANO- CAT 2016.indd 1 16/02/16 14:55


140

FO

OD

&B

EVER

AG

E TE

CHN

OLO

GY

CA

TALO

GU

E20

16 e

ditio

n


VALVES FOOD&BEVERAGE TECHNOLOGY

4G GHIDINI was set up in 1978 and soon started its escalation in the production of stainless steel ball valves and fi ttings, striv-

ing to achieve key objectives such as product and service quality, in order to meet the ever more demanding needs of the domestic and global markets.

Technological innovation and on-going research have helped the company to gain a leading position in the industry by off ering their own line of certifi ed products able to fully cater for all types of applications they were designed and manufactured for. Thirty years of experi-ence have allowed us to off er added value in terms of of-fer, product range, prompt delivery. All these benefi ts, to-gether with our 100% made in Italy quality, make sure we can fully meet the expectations and requirements of our customers. The entire product range is designed and man-

ufactured in our factory located in Lumezzane (Brescia).4G GHIDINI has been awarded certifi cation to UNI EN ISO 9001:2008 standard. Our ball valves are compliant with directive 97/23/CE “PED”, introduced to standardise the legislation enforced in the Members States on pressure equipment, and can be supplied on request in compli-ance with directive 94/9/CE “ATEX” for approximation of the legislation enforced in the Member States covering safety systems and equipment to be used in potentially explosive environments (II 2 G-D).

All our products are designed, manufactured and, before being sold, fully tested by following the correct testing practice with cutting edge equipment, in order to ensure total quality and safety to all our fi nal user.

www.4gghidini.it

4G, STAINLESS STEEL BALL VALVESAND FITTINGS INDUSTRY

4G GHIDINI, fondata nel 1978, ha da subito ini-ziato la sua escalation nella produzione di valvole a sfera e raccorderia in acciaio inox

prefi ggendosi come obiettivo principale la qualità del pro-dotto e del servizio per soddisfare le sempre più esigenti domande del mercato nazionale e internazionale.Ad oggi è punto di riferimento nel settore per qualità ed affi dabilità, grazie ai costanti investimenti in ricerca e svi-luppo e alla propria linea di prodotti certifi cati in grado di soddisfare pienamente ogni singola applicazione per i quali sono stati progettati e realizzati. La trentennale esperienza garantisce un valore aggiunto in termini di of-ferta, con disponibilità dei prodotti e conseguente tempe-stività nelle consegne che, unitamente alla qualità 100% made in Italy, consentono di soddisfare appieno le aspet-tative e le esigenze dei clienti. L’intera gamma di prodotti è progettata e costruita interamente presso lo stabilimento

di Lumezzane (Brescia) 4G GHIDINI è certifi cata secondo la normativa UNI EN ISO 9001:2008.Le valvole a sfera sono conformi alla direttiva 97/23/CE “PED” per il riavvicinamento delle legislazioni degli Stati membri in materia di attrezzature a pressione e a richiesta possono essere fornite in conformità alla direttiva 94/9/CE “ATEX” per il riavvicinamento delle legislazioni degli Stati membri relative agli apparecchi e sistemi di protezione destinati ad essere utilizzati in atmosfera potenzialmente esplosiva (II 2 G-D).Tutti i prodotti sono progettati, realizzati e, prima di essere commercializzati, collaudati al 100% seguendo una cor-retta prassi costruttiva mediante l’ausilio di strumentazio-ne all’avanguardia, per garantire agli utilizzatori fi nali la totale qualità e sicurezza.

www.4gghidini.it

4G, VALVOLE A SFERA E RACCORDERIA INOX

4G - CAT 2016.indd 1 27/01/16 10:13

25065 LUMEZZANE S.S. BRESCIA (ITALY) Via Ruca, 400 (Z. I.)Tel. 0039 030 8925953 - Fax. 0039 030 8922167

[email protected] - www.4gghidini.it

4G GHIDINI SRL VALVOLE A SFERA

E RACCORDERIA INOX

4G GHIDINI SRL STAINLESS

STEEL BALL VALVES AND FITTINGS

ESPERIENZA - EXPERIENCE

QUALITÀ - QUALITY

ECCELLENZA - EXELLENCE

PASSIONE - PASSION

AFFIDABILTÀ - RELIABILITY

142

FO

OD

&B

EVER

AG

E TE

CHN

OLO

GY

CA

TALO

GU

E20

16 e

ditio

n


EXHIBITIONS FOOD&BEVERAGE TECHNOLOGY

S PS IPC Drives Italia confirms to be the Italian refe-rence point of Industrial automation, becoming the messenger of this sector development, grown by

9,5% in the first semester 2015 according the data shown by ANIE Automazione, with a reassuring seasonal +7%.

From 24 to 26 may in Parma, SPS Italia enriches with con-tents and brand new events. Two exhibition pavilions, number 2 and 3, where to find the whole offer and the leading players of the market, and an entry pavilion, num-ber 4, hosting a new demonstration area, the Know How 4.0, Industrial Software project and a spacious conference room for workshops and seminars. The external area, set up between the exhibition pavilions, will host the initia-tives for visitors offered by some of the exhibitors. The admission ticket will display these initiatives in specific boxes. System Integrators will be located in a new area of pavilion 3. The most appealing news of the sixth edition is the Know How 4.0 area, a demonstrative space that wants

to turn the concepts of Industrie 4.0 and Smart Factory into reality by displaying real and virtual prototypes sup-ported by media contents. Under the very eyes of visitors concepts such as process/product innovation, computeri-zation, enabled technologies use, electronics and IT in ge-neral will be conjugated and proved practically, in a spirit of knowledge sharing aimed at putting forth a new cor-porate mentality and new relation and business models. This area meets the need for innovation knowledge and comprehension as well as the need for putting industry in contact with the opportunities provided by the latest technologies. This area will also host the Industrial sof-tware exhibitors, the young engineers coming from the Academic world and from Start-Up. In this perspective, the most interesting projects presented by students and fresh graduated engineers will turn into as prototypes, applications and products.

www.spsitalia.it/en

SPS IPC DrIveS ItalIa, ItalIan referenCe PoInt of InDuStrIal automatIon

S PS IPC Drives Italia si conferma il punto di riferimento a livello nazionale per l’automazione industriale facen-dosi portavoce della crescita del comparto, cresciuto,

nel primo semestre 2015, del 9,5% secondo i dati presentati da ANIE Automazione; con un confortante +7% complessivo.

Dal 24 al 26 maggio 2016, a Parma, SPS Italia si arricchisce di contenuti e di nuovi eventi. Due padiglioni espositivi, il 2 e il 3, dove trovare tutta l’offerta e i principali player e in-terlocutori del mercato, e un padiglione di ingresso, il 4, che ospiterà la nuova area dimostrativa Know How 4.0, il pro-getto Industrial Software e una spaziosa sala convegno per le Tavole Rotonde e i convegni. L’area esterna, allestita tra i padiglioni espositivi, ospiterà le iniziative di alcune aziende pensate per i visitatori e indicate nel biglietto di ingresso. Confermato anche il progetto dedicato ai System Integra-tor che si collocherà in una nuova area del padiglione 3. La più attrattiva delle novità della sesta edizione della fiera è lo spazio Know How 4.0, un’area dimostrativa che intende

dare sostanza ai concetti di Industrie 4.0 e Smart Factory con isole di lavoro reali e virtuali affiancate da contenuti multimediali. Concetti quali l’innovazione di processo / pro-dotto, la computerizzazione, l’uso di tecnologie abilitanti, l’elettronica e l’IT, saranno coniugati e dimostrati pratica-mente sotto gli occhi dei visitatori, in un clima di condivisio-ne delle conoscenze teso a far circolare una nuova cultura di impresa e nuovi modelli di business e di relazione. Una risposta all’esigenza di conoscere e comprendere le inno-vazioni di settore e avvicinare il mondo dell’industria alle nuove opportunità messe a disposizione dalle tecnologie più moderne. Nello stesso luogo saranno presenti anche gli espositori del settore Industrial software, i giovani ingegneri del mondo universitario e le startup. In quest’ottica, i pro-getti più interessanti realizzati da studenti, laureandi e neo-ingegneri, potranno essere concretamente mostrati sotto forma di prototipi, applicazioni e prodotti.

www.spsitalia.it/en

SPS IPC DrIveS ItalIa , Punto DI rIferImento Per l’automazIone InDuStrIale

SPS FIERA - CAT 2016.indd 1 04/02/16 18:02

technology CATALOGO 2016FOOD&BEVERAGE TECHNOLOGYF

OO

D&

BEV

ERA

GE

TEC

HN

OLO

GY

CA

TALO

GU

E20

16 e

ditio

ncataloGUE 2016 EDITION

CONTENTs4G GHiDiNi sRL 140-141 Via Ruca 400 25065 Lumezzane - BsItaly

AkOmAG sRL 128-129 Frazione Diolo, 15/D 43019 soragna Parma - PRItaly

ALBA & TEkNOsERViCE sRL 88-89 Via Delle Industrie, 26 35010 Villafranca Padovana - PD - Italy

ALTECH sRL 36-37 V.Le A. De Gasperi, 72 20010 Bareggio - MI - Italy

Am TECHNOLOGY sRL 82-83 Via Della Tecnica, 66 36043 Camisano Vicentino - VI Italy

AmD ELECTRONiC sRL 38-39 Piazzale Martesana, 10 20128 Milano - Italy

AsC AuTOmATiC sYsTEm CONTROL 74-75 Via Della Locanda, 9 41036 Medolla - MoItaly

AVENTiCs sRL 92-93 Piazza Maestri Del Lavoro, 7 20063 Cernusco s/N - MIItaly

BBm PACkAGiNG 28-29 Via Pregalleno, 24 24016 BergamoItaly

BERTuzzi FOOD PROCEssiNG sRL 44-45 Corso sempione, 212 Bis 21052 Busto Arsizio - VA - Italy

BEumER mAsCHiNENFABRik GmBH & CO. kG 42-43 oelder strasse 40 59269 BeckumGermany

BizERBA sPA 6-7 Via G. Agnesi, 172 20832 Desio - MB - Italy

BOLONDi iVANO OFF. mECC. 138-139 Via A. Volta, 4 42027 Montecchio Emilia - REItaly

BONDANi sRL 18-19 Via Romanina, 3 43015 Noceto - PR - Italy

C&G DEPuRAziONE iNDusTRiALE sRL 112-113 Via I° Maggio, 53 50067 Rignano s.Arno - FI - Italy

CAD PROjECT sRL 122-123 Via Leopardi, 19/E 28060 san Pietro Mosezzo - No - Italy

CHiARAVALLi GROuP sPA sOCiO uNiCO 56-57 Via Dante, 40 21040 Jerago Con orago - VA - Italy

CiDiEssE ENGiNEERiNG sRL 118-119 Via Dell’artigianato, 3 36013 Piovene Rocchette - VI - Italy

CONTRiNEx iTALiA sRL 94-95 Viale Gandhi, 7 10051 Avigliana - To - Italy

CRsi - CENTRO RiCERCHE sViLuPPO imPiANTi s.A. 52-53 Via Industria, 7 - stabile Talea Ch-6807 Cadempino - Lugano switzerland

EsmACH sPA 84-85 Via V. Veneto 143 36040 Grisignano Di Zocco - VIItaly

EuROsiCmA sPA 10-11 Via Michelangelo Buonarroti, 4/6 20090 segrate - MI - Italy

EVO sERViCEs sRL 96-97 Via Costituzione, 25 42015 Correggio - RE - Italy

FBF iTALiA sRL 64-65 Via Are, 2 43038 sala Baganza - PRItaly

INDICE CAT 2016_CORR.indd 1 02/12/16 12:18


OO

D&

BEV

ERA

GE

TEC

HN

OLO

GY

CA

TALO

GU

E20

16 e

ditio


FiORiNi iNTERNATiONAL sPA 26-27 Via Maestri Del Lavoro,13Zi Ponte Lucerta 60012 Trecastelli - ANItaly

FRAmAx sRL 134-135 Via Marlianese, 31 51030 serravalle Pistoiese - PT Italy

GEA NiRO sOAVi - mECHANiCAL EquiPmENT iTALiA sPA 66-67 Via Mario Da Erba Edoari, 29/A 43123 ParmaItaly

GENERAL sYsTEm PACk sRL GsP 14-15 Via Lago Di Albano, 82 36015 schio - VI - Italy

i.m.A. iNDusTRiA mACCHiNE AuTOmATiCHE s.P.A. 16-17 Via Emilia, 428/442 40064 ozzano Dell’emilia - Bo Italy

iCF & WELkO sPA 54-55 Via sicilia ,10 41053 Maranello - Mo - Italy

iFP PACkAGiNG sRL 20-21 Via Lago Di Alleghe, 19 36015 schio - VI - Italy

iGus sRL 102-103 Via Delle Rovedine, 4 23899 Robbiate - LC - Italy

iNDusTRiE DE NORA s.P.A. 68-69 Via Bistolfi, 35 20134 Milano - Italy

iVAR iNDusTRY sRL 108-109 Via san Pierino, 4 Zai 37060 Trevenzuolo - VRItaly

LAWER sPA 76-77 Via Amendola, 12/14 13836 Cossato - BIItaly

LEYBOLD iTALiA sRL 12-13 Via Trasimeno, 8 20128 Milano - Italy

LiNPAC PACkAGiNG sRL 32-33 Via Monte Pastello, 40 37057 s. Giovanni Lupatoto - VR Italy

m.H. mATERiAL HANDLiNG s.P.A. 114-115 Via G. Di Vittorio, 3 20826 Misinto - MB - Italy

mAkRO LABELLiNG sRL 34-35 Via Don Doride Bertoldi, 91 46045 Marmirolo Mantova - MN Italy

mEssE FRANkFuRT iTALiA sRL 142-143 Via Quintino sella, 5 20121 Milano - Italy

mFT sRL 50-51 Via Madonna Di Fatima, 35 84016 Pagani - sA - Italy

miCROLiNE sRL 40-41 Via Emilia, 33/C 40011 Anzola Dell’emilia - Bo Italy

miNi mOTOR sRL 104-105 Via E. Fermi, 5 42011 Bagnolo In Piano - RE Italy

NAVATTA GROuP FOOD PROCEssiNG sRL 60-61 Via sandro Pertini, 7 43013 Pilastro Di Langhirano - PR Italy

OCmE sRL 22-23 Via Del Popolo, 20/A 43122 ParmaItaly

ORVED sPA 126-127 Via Dell’artigianato, 30 30024 Musile Di Piave - VEItaly

PAmOCO s.P.A. 106-107 Via Riccardo Lombardi, 19/6 20153 Milano - Italy

PENTA sRL 120-121 Via Uccellino, 75/77 44028 Poggio Renatico - FE Italy

CONTENTs



OO

D&

BEV

ERA

GE

TEC

HN

OLO

GY

CA

TALO

GU

E20

16 e

ditio


PFm sPA 24-25 Via Pasubio, 49 36036 Torrebelvicino - VI Italy

PiERALisi sPA 62-63 Via Don Battistoni, 1 60035 Jesi - ANItaly

PiGO sRL 46-47 Via Pontaron, 30 36030 Caldogno - VIItaly

PND sRL 58-59 Via Brancaccio, 1184018 scafati - sA - Italy

POmPE CuCCHi 70-71 Via Dei Pioppi, 39 20090 opera - MI - Italy

PROxAuT sRL 116-117 Via Caduti sul Lavoro, 8 41013 Piumazzo Castelfranco Emilia Mo - Italy

ROTRONiC iTALiA sRL 98-99Via Repubblica Di san Marino, 1 20157 Milano Italy

smi sPAsmi GROuP 130-131 Via Carlo Ceresa, 10 24015 san Giovanni Bianco - BG - Italy

sORDi imPiANTi sRL 124-125 Via Paolo Gorini, 9 26836 Montanaso Lombardo - Lo - Italy

sPk POWER GENERATiON sRL 110-111 Viale Verdi, 94 20831 seregno - MBItaly

TECNiNOx Di A. NAmAziANO sRL 48-49 Via Costa, 27 43035 Felino - PRItaly

TECNO PACk sPA 4-5Via Lago Di Albano, 76 36015 schio - VI - Italy

TECNOPOOL sPA 80-81 Via M. Buonarroti, 81 35010 s. Giorgio In Bosco - PDItaly

TELmOTOR sPA 100-101 Via Zanica, 91 24126 Bergamo - Italy

TmG imPiANTi sPA 30-31 Via Regia, 5 35018 s.Martino Lupari - PD - Italy

TPs sRL 78-79 Via Dei Videtti, 36/38 24064 Grumello Del Monte - BG - Italy

Ts iTALiA sRL 136-137 Via Dei Gelsi 41/43 20853 Biassono - MBItaly

TuBiNi FORNi 90-91 Via staffali, 38 Za 37062 Dossobuono - VRItaly

VELO ACCiAi sRL 132-133 Via s. Lorenzo, 42Cà Rainati 31020 s. Zenone Degli Ezzelini - TV Italy

zAmBELLi sRL 8-9 Via Ferrara, 35/41 40018 san Pietro In Casale - Bo Italy

zANOTTi sPA 72-73 Via Martin Luther King, 30 46020 Pegognaga - MNItaly

zmATik PAsTRY mACHiNEs 86-87 Via Fiesso, 4 35020 Arre - PDItaly

CONTENTs


EDITRICE ZEUS Via P. Ballerini, 66 20831 Seregno - MB, Italy tel. +39 0362 244.182 - 0362 244.186 - www.editricezeus.com

www.allfoodonline.com

Do you want to support your proDucts all over the worlD? Get on:

MAGAZINES

AND wEb portAl

Do you neeD new technoloGies for your proDucts?click on: www.itfoodonline.com

in 10 languages

in italian and english

ADV ONDE ZEUS CAT2016.indd 1 10/03/16 15:48

www.editricezeus.com

CATALOGO2016-COVER_F+R.indd 2 10/03/16 15:52

Documents

FOOD & BEVERAGE TECHNOLOGY CATALOGUE 2016 EDITION