Upload
others
View
0
Download
0
Embed Size (px)
Citation preview
FO-4BRI
4 ISDN BRI fiber optic
Extension of 4 BRI from PBX or Network
BRI set up as NT or TE
Set up as T0 or S0
Operate also with an E1 fiber modem FO-E1T1
Fiber optic multimode or singlemode up to 117 km
OTHER EQUIPMENT FOR BRI DISTRIBUTION
MD444B
4 ISDN BRI G.SHDSL modem over 4 wire up to 8km
CV24BR
4 ISDN BRI converter to E1 G703/G704
Interface converter to PDH/SDH or MW links
Distribution of BRI over TDM Network
DISTRIBUTION and EXTENSION of ISDN BRI
CXR, offers a global portfolio if Telecom equipment including a range of ISDN
Terminal Adapters and extenders over Fiber Optic link, copper cables and TDM
multiplexers.
The FO-4BRI is a fiber optic modem, this is carrying 4 independent BRI with
2B and 1D channels. This modem is available as multi-mode or single-mode
fiber with a complete choice of distances.
The FO-4BRI is supporting the point to point connection (T0) or bus connection (S0). In
the pair of modem one equipment must be set as TE in order to be connected to the
Network or the PBX while at the other end the other modem is set as NT to connect to
the ISDN terminal.
The FO-4BRI-C is supporting the
power feeding of the BRI to use
a ISDN phone without power.
This Modem is intended to:
Extend in the customer premise the BRI line through an industrial campus
from the Public termination with a full immunity to electric noise
Interconnect 2 PBX in a campus or over several stairs in a large building
despite to the electric/elevator/air conditioning installation
Extend the BRI line in large infrastructure campus to connect PBX/phone
set/Visio up to 60 km
This fiber optic modem is a secure communication link to transport voice
communication for military, airport between central site and isolated users.
FO-4BRI ISDN BRI to BRI modem over fiber optic
ISDN extension over f iber opt ic
The FO-4BRI can work together
with a E1 converter CV24BR or
SHDSL extender MD444B if
they are connected through E1
interface over an E1 network.
2
The information contained in this document are provided without warranty and do not constitute a contractual document.
In order to improve its products, CXR reserves its right to modify without notice any part of this document.
SPECIFICATIONS
Fiber Optic Line
ST or SC connectors
Type of multi-mode fiber (NM) with diameter 62,5/125µm or single-mode (SM) 9/125 µm
ISDN extension over f iber opt ic
MXCFG
Graphical management
software
ISDN
• 4 Basic Access Rate BRI interfaces 2B+D
• Line 4W
• Use to carry a Bus S0 or a point to point T0
• One device of the pair must be set up as NT (network) and the other as TE (terminal)
• In version DC FO-4BRI-xxxC only , one BRI is power source to power feed an ISDN telephone set
Presentation
• Desktop in metal box, all connections on front except power
• Rack card for AMS4/AMS16, uses 2 slots
Management
• Local console, RS232 port
• Intuitive menus and Windows GUI—MXCFG
• Management card in the AMS16 chassis : SNMP
• V54 loop test : B2, B3 loop
Signalling : standalone or rack card
• LED : Power, DTE, SYNC, ERR, DATA and test
• Push button CLR to delete the ERR mode
General Characteristics of desktop
• Dimensions : 287 x 175 x 41 mm
• Power supply : version AC : 110—230 Vac version DC : 48 Vdc (40 - 68 Vdc)
• Power consumption < 10 W
• Weight : 1,5 kg
• Operating temperature : -5 to +50 °C
• Hygrometry : 90%, non condensing
• MTBF = 120,000 H
ORDERING REFERENCES
CXR Anderson Jacobson
Rue de l'Ornette
28410 Abondant - France
T +33 (0) 237 62 87 90
F +33 (0) 237 62 88 01
email: [email protected]
Smart Solutions for
Smart Networks
www.cxr.com
Reference Description Fiber Optic Modem with 4x ISDN BRI S0/T0 TE / NT interfaces
FO-4BRI-SFP-I With SFP slot (but no module), stand alone, 110-230 Vac power supply
FO-4BRI-SFP-C With SFP slot (but no module), stand alone, 24-48 Vdc power supply
FO-4BRI-SFP-R With SFP slot (but no module), rack mount card for AMS4 or AMS16 chassis (2x slots)
FO-4BRI-M8TI With Multimode 820nm ST interface for 4 km, stand alone, 110-230 Vac power supply
FO-4BRI-SLTI With Single-mode 1310nm ST interface for 30 km, stand alone, 110-230 Vac power supply
FO-4BRI-SLCI With Single-mode 1310nm SC interface for 30 km, stand alone, 110-230 Vac power supply
FO-4BRI-SLCC With Single-mode 1310nm SC interface for 30 km, stand alone, 24-48 Vdc power supply
FO-4BRI-M8TR With Multimode 820nm ST interface for 4 km, takes 2x slots in a AMS4 or AMS16 chassis
FO-4BRI-SLCR With Single-mode 1310nm SC interface for 30 km, takes 2x slots in a AMS4 or AMS16 chassis