Embed Size (px)
Citation preview
FUGRO MIDDLE EAST
COMPANY PROFILE
Fugro Middle East Company Profile
Page 2 of 13
FUGRO WORLD WIDE Fugro NV group of companies, based in The Netherlands, is an international group of professional, highly specialized engineers and earth scientists, who use the most advanced technologies to provide unique technical studies and professional consultancy in the area of Earth Sciences, with an objective “to lead the field in technological development and quality” Fugro, founded back in 1962 in Amsterdam-The Netherlands, now operates around the globe, with over 275 offices in 60 countries, and more than 14,600 employees. Fugro is listed on Euronext NV in Amsterdam, since 1992 and in Amsterdam Midkap index since 2002. Fugro provides the “widest spectrum” of engineering services in the fields of earth sciences, with operations on land, at sea and from the air, in three main areas: Geotechnical, Survey and Geoscience.
• Onshore and Offshore Geotechnical investigation • Onshore and Offshore Geophysical Surveys • Land Survey and Aerial/Satellite Imaging Services • Environmental Services
FUGRO MIDDLE EAST Fugro Middle East BV (FME), established in the United Arab Emirates in 1975, initially started as a geotechnical and foundation engineering organization. Today, FME provides a complete range of geotechnical engineering investigations and consultancy services, surveying and mapping services throughout the Gulf area, India and Pakistan. The core of the company’s activities since the year of establishment has been in the Emirates of Abu Dhabi and Dubai. Numerous projects in the United Arab Emirates, particularly in Abu Dhabi, were carried out for major clients both in the oil and gas industry and the public sector. Major clients of FME include major national and international Oil Companies as well as national and international contracting and development companies. In the public sector direct or indirect projects were carried out for Municipalities, Public Works Departments and Water and Electricity Departments. A list of major projects carried out by FME is included in this company profile. FME has operating offices in Dubai, Abu Dhabi, Qatar and Oman, whilst project offices operate through agency and joint venture organizations in other Middle East countries, i.e. Kuwait, Bahrain and Yemen.
Fugro Middle East Company Profile
Page 3 of 13
Fugro Middle East specialises in five core activities, summarized as follows:
• Onshore geotechnical services - exploration borehole drilling
(vertical, horizontal and inclined) - ground investigations - foundation engineering consultancy - specialist testing/instrumentation/pile testing - soil and construction materials testing - geotechnical contracting - probing and grouting of cavernous sites
• Nearshore geotechnical services
- Sub-sea investigations - Marine exploration drilling - Marine Cone Penetration Testing - Marine foundation engineering - jack-up penetration analysis
• Geophysical Surveying and Testing
- borehole geophysical logging - cross-hole seismic tomography - cross-hole and down-hole seismic - surface geophysical surveying
• GPR • Seismic Refraction • MASW • Electrical Resistivity Tomography • Magnetic • Electromagnetic • Gravity & Microgravity
• Construction materials testing, specialist testing and instrumentation - construction materials testing - pile testing & instrumentation - geotechnical instrumentation & monitoring
• Survey and positioning services
- topographic surveys - engineering surveys - bathymetric and geophysical surveys - aerial imaging - image control and processing - digital terrain modelling - vector mapping - geographic information systems (GIS) - CAD production
Services in the above areas are provided by locally-based staff and equipment, while for larger or more complex projects cooperation from experienced and specialist resources of the Fugro Group world-wide are called upon.
Fugro Middle East Company Profile
Page 4 of 13
FME operates a comprehensive quality and safety system with a detailed quality policy to ensure a high standard of service and safety at all times. Certificates are included in this company profile.
Engineering and Consultancy Design and consultancy studies for foundations, on and offshore, slope stability material selection and other geotechnical problems.
Onshore site investigation Using conventional cable tool boring and rotary core drilling rigs
and static cone penetration testing equipment. Conventional exploration techniques are supplemented by specialist down-hole and surface, geotechnical and geophysical testing.
Nearshore site investigation With onshore equipment mounted on either small floating craft or
self elevating platforms. Offshore site investigation Using specialist drilling, testing and sampling equipment
mounted on specialist drill ships or jack-up barges. HSE AND QUALITY MANAGEMENT FME performs all its operations in accordance to its accredited HSE manuals and HSE Management System, as certified by OHSAS 18001; 2007. The company is firmly committed to full compliance with all industry standards and local laws as may be applicable. It is the responsibility of Managing Director to implement the company’s policies, fully within the Company organization. FME also carries out its geotechnical investigation projects in accordance with its Quality Management System and accredited Manuals, as certified by ISO 9001: 2008. Both HSE and Quality Management systems are subject to constant improvement to cope with the increasing stringent requirements of the market.
Fugro Middle East Company Profile
Page 5 of 13
GEOTECHNICAL ENGINEERING CONSULTANCY
Over the past years of remarkable growth in the region, and during the sharp increase in construction works both in the private and public sectors, FME has noticed a lack of expertise in optimizing engineering ground solutions. The market developed an unjustifiable conservative approach in geotechnical design as an attempt to minimize risk and safely bypass any uncertainty in ground behavior and soil-structure interaction. Consequently, a substantial increase in cost has been added to budgets of numerous Civil Engineering projects.
As a countermeasure to waken up value engineering, we at FME decided to familiarize the market with an unusual and uncommon practice in tackling geotechnical engineering exercises.
Fundamentally, our practice is based on exploiting the data collected from our own state-of-the-art geotechnical investigation, combine it with engineering and geological expertise, carry out computational analysis, frequently involving finite element modeling, to come up with a robust conclusion. We work collaboratively with our clients to meet the objective: “Deliver Innovative & Economical solutions.” The objectives are achieved through the knowledge and experience of engineers coming from different backgrounds across the world.
At Fugro, consultancy services and design assignments are related to foundations for buildings, infrastructure projects, industrial complexes, marine structures and oil platforms and land reclamation, as well as hydrological studies. Moreover, Fugro has centers of expertise for earthquake engineering and water retaining structures.
In the Middle East, Fugro was among the first, if not the first, geotechnical specialist to lay high rise structures up to 40 floors on shallow foundations instead of originally designed deep large diameter piles.
We grasp the geology, explore the ground, hand-craft computational models and hit our goal: “Innovative & Economical Solutions”.
Fugro Middle East Company Profile
Page 6 of 13
SPECIALIST TESTING AND INSTRUMENTATION FME has developed numerous specialist testing methods to determine geotechnical parameters and to observe soil/structure interaction. Fugro Middle East has the equipment and personnel readily available in the U.A.E. to carry out the above testing services on a day to day basis. These techniques include:
GEOTECHNICAL / STRUCTURAL INSTRUMENTATION & MONITORING
Ground-water-level measurement Vibrating wire piezometers for measurement of pore water pressure Settlement and Heave of groundwork’s (settlement markers, magnetic extensometers) Inclinometer systems to measure lateral deformation Tilt meter and Tilt plate systems Strain gauge installation and measurement Displacement and distortion Edge joint monitoring Tunnel convergence Monitoring of cracks Earth-pressure cells Tie-back anchor loads Compressive and tensile forces Temperature measurement (groundwater, ambient air, structures, mass concrete pours) Vibration monitoring Noise monitoring Real time data collection and analysis systems
PILE TESTING
Pile integrity testing Pile load testing Pile foundation inspection Strain gauge installation and measurement
SOIL & CONSTRUCTION MATERIALS TESTING FME Laboratories offer a wide range of routine and specialist tests for geotechnical applications and construction materials control. With Laboratories located in the United Arab Emirates in Dubai and Abu Dhabi, in Doha-Qatar, and Muscat-Oman, we are also able to draw on the services and expertise of Fugro Laboratories in the Netherlands, United Kingdom, France, Germany, Hong Kong, Singapore and the United States of America. Together with our Survey and Engineering Consultancy services we are able to cater to a broad range of industry needs, whether they be geotechnical site investigations, environmental surveys, pile monitoring, structural instrumentation or quality control of construction materials. The laboratory division functions under strict quality control procedures using regularly maintained and calibrated equipment operated by experienced and trained technicians. The company’s quality manual is modelled on ISO 9001 and ISO/IEC 17025 guidelines and conforms to local authority regulations. All routine tests are conducted in accordance with internationally recognised British, American or European Standards. The laboratory testing division is Certified to ISO 9001: 2008, is Accredited by the Dubai and Doha Municipalities and is an approved laboratory for the ASHGAL, Abu Dhabi Municipality, Abu Dhabi Public Works Department, ADWEA, TAKREER, BOUROUGE, ADCO, ADNOC, ADMA-OPCO and GASCO.
Fugro Middle East Company Profile
Page 7 of 13
FME range of laboratory, field and specialist testing services include (generally) the following activities: Field Testing
• Zone load testing • Plate load testing (30,50 and 60mm plates) • In-situ density • Field CBR • Dynamic Macintosh probe
Laboratory Test
SOILS CEMENTS Durability Classification/Index Property Setting Time Porosity & Water Absorption Chemical Analysis Compressive Strength ISAT Density and Compaction Control Fineness Water Permeability Permeability/Infiltration/Percolation Soundness Rapid Chloride Permeability Settlement/Consolidation Properties Heat of Hydration Chloride Migration Coefficient Plate and Zone loading Chemical Analysis Electrical Resistivity Shear strength Total / Effective Stress Triaxial ARCHITECTURAL PRODUCTS Building Condition Surveys Electrical / Thermal Conductivity Natural Stone On-site Sampling Ceramic Tiles Non Destructive Testing ROCK Glass Fiber Reinforced Cement (GFRC) Laboratory Analysis Index Property Tests Glass Fiber Reinforced Gypsum (GFRG) Compressive Strength Polystyrene ASPHALT / BITUMEN Indirect Tensile Strength Marshall Stability/Mix Design Deformability CONCRETE Aggregate Properties Triaxial Strength Fresh Concrete In-situ Sampling/Quality Control Rock Joint Shear Tests Slump, Temp, Density, Air Content,
Bleeding
Porosity / Water Absorption Mix Designs STEEL Durability & Wearing Chemical Analysis Tensile Strength Rock Armour Site Evaluation Bend / Rebend Petrographic Examination Hardened Concrete 7-Wire Strand Testing Chemical Analysis Compressive Strength Steel Bolts Tensile Strength Reinforcement Coupler AGGREGATES Flexural Strength Manhole Cover Loading Physical Property Chemical Analysis Epoxy Coating Thickness Chemical Analysis Cement Type/Content Chemical Analysis Particle Shape Petrographic Examination Scaffold Component/System Crushing / Impact Values Terrazo Tiles Resistance to Degradation / Wear Precast Concrete Masonry Units Soundness Precast Concrete Paving Blocks Aggregate Reactivity Precast Concrete Kerbstone Petrographic Examination
Fugro Middle East Company Profile
Page 8 of 13
ONSHORE GEOPHYSICS The onshore geophysics is well establish within the Fugro Group with specialist based in several offices in Austria, Australia, France, Germany, Holland, UAE, USA and UK with more than 80 qualified geophysicists, geologists, and geophysical technicians and a wide range of geophysical instrumentation. The group undertakes geophysical projects throughout the world through projects managed by Fugro where onshore geophysics is part of the investigation. The onshore geophysics group of FME offers a wide selection of surface geophysical techniques that involve the measurement and interpretation of physical properties of the earth in order to be able to determine subsurface conditions for engineering, geotechnical and environmental investigations. Applications of these techniques are numerous and can be applied on scales ranging from geological variations through to structural investigations within buildings. We have many years of experience and expertise in the acquisition, processing and interpretation of a wide variety of geophysical techniques, including Ground Probing Radar, Magnetic Surveying, Electromagnetic Methods, Resistivity Surveying, MASW, Seismic Reflection and Refraction techniques, and Gravity and Microgravity Surveys. As well as the surface based techniques, Fugro offers a wide selection of borehole geophysical logging techniques. These techniques use borehole tools are lowered down drilled holes before completing (closing) the hole, and as quality control checks. Available tools include:
• Resistivity and induction sondes • Fluid resistivity (conductivity) logging • Temperature logging for identifying
vertical flow • Acoustic borehole images to identify
fissures and fractures in soil and rock • Gamma logging for lithology detail
and detection of radioactive contaminants
Fugro Middle East Company Profile
Page 9 of 13
LAND SURVEY AND POSITIONING SERVICES Our sister Company Fugro Maps, based in Sharjah, are specialized in the following actives and services: Pipeline / Corridor Route Surveys : Topographical and longitudinal profile surveys for pipeline,
road & power line construction. Topographic Surveys : Detail surveys at all specifications, ranging in size from
land parcel boundary establishment for Municipality approvals, to proposed port and refinery developments. Detection of underground services available as optional extras.
Geodetic Control Surveys : Establishment of precision geodetic control networks
ranging in size from site specific local systems to national control networks.
Positioning Services : Omnistar DGPS positioning available for setting out well
heads, general reconnaissance surveys, or provision of satellite image 3D control. Precision GPS positioning available for provision of aerial photography 3D image control.
Engineering Surveys : Including settlement monitoring, site set-out and bridge
construction, and dimensional control for oil storage tanks. Aerial Imaging : Fugro MAPS owns two survey aircrafts, a pressurised twin-
turboprop Piper Comanchero PA-31p with a service ceiling of 11,000 m and a range of 3.000 km and a single-engine turbo-charged CESSNA TU206G that can operate out of small airstrips.
The aircrafts are equipped with either VEXCEL UCX large format digital Aerial Camera System with Applanix IMU, or ZEISS RMK TOP film cameras (15 or 30cm focal length). In the case of the ZEISS film cameras, apart from the development of the original films in our own laboratory and the subsequent scanning operation, all follow-up procedures are digital.
Satellite Imagery Fugro MAPS supplies and integrates a range of satellite
images at various resolutions for mapping, GIS and commercial applications. As a DigitalGlobe Master Reseller of QuickBird satellite imagery, Fugro MAPS can provide the highest resolution satellite imagery presently available.
Image control and processing Fugro MAPS is specialized in fast and effective production
of digital data for computerized mapping and analysis in GIS systems. Image processing section is a high-tech production facility with the capacity to handle image data projects in the multi-terabyte range. It includes full capability to process ortho images from aerial photography as well as satellite images. This combination opens possibilities to provide the needed image map data in the fastest and most economic way and has made Fugro MAPS a leading producer of Digital Ortho Image (DOI) products.
Fugro Middle East Company Profile
Page 10 of 13
Digital terrain modelling Precision DTMs are required for a range of engineering
applications and a prerequisite for accurate Digital Ortho Images. The advanced terrain analysis and display options of the latest GIS software permit the exploitation of the terrain data for a great variety of applications. Fugro MAPS has developed extensive experience in the automated creation of high precision DTMs covering larger areas and the different terrain types of the region.
Vector mapping The demand for digital building models of cities has been
steadily rising. Fugro MAPS has developed and utilized a range of procedures for the extraction of city models, including buildings and road networks, from a variety of remote sensing and terrestrial data sources. The resulting datasets are used in a range of modeling systems and commercial applications.
Spatial Data Integration Fugro MAPS Spatial Data Integration Service assists
clients, many of them in the Cadastral, Municipal, Environmental, Mining and other fields to integrate their spatial data into GIS or other systems/databases. Fugro MAPS data integration concepts are designed to channel relevant information to all levels of an organization with minimum effort and an emphasis on virtually no training requirements.
System Engineering Fugro MAPS provide tools for production, processing and
visualization of geographic data. Fugro MAPS System Engineering can rely on more than 250 man-years of software development experience in geographic data acquisition, processing and integration for its customers. Fugro MAPS develops advanced production procedures as well as efficient end-user interfaces for:
• Photogrammetric data capture. • Mapping automation processes. • GIS implementation. • Image management, processing and display.
Interfaces based on a range of CAD & GIS applications or standard web browsers allow users to easily access geographical information within a very short time and without training requirements.
Fugro Middle East Company Profile
Page 11 of 13
MAJOR EQUIPMENT FOR SITE INVESTIGATION Onshore Drilling Rigs
- Boart Longyear DeltaBase520 rotary coring rigs - Edeco T-30 rotary coring rigs - Pilcon Wayfarer Shell and Auger Rigs - PQ-wireline coring equipment spreads
Piezo-Cone Penetration Testing (CPTu)
- 6 CPT trucks - 3 CPT Crawlers - 2 nearshore CPT frames
Nearshore
Five (5) Hydraulic Self-Elevating-Platforms (jack-ups) of various sizes capable of working in water depths ranging from 0.5 meter to 25.0m.
Fugro Middle East Company Profile
Page 12 of 13
Materials Testing
- 50kN loading frames - 100kN loading frames - 38mm triaxial cells and pressure panel - Shearbox frame - Marshall frame - Consolidation frames - 100t universal testing machines - 2500kN concrete cube testing machines - 100kN concrete flexural frame - Concrete mixer and ancillary equipment - Ultrasonic concrete tester - Dyna concrete pull-off tester - Spectrophotometer - Flame photometer - Concrete core drilling equipment - Cover meter - Half cell corrosion tester - Rapid chloride permeability apparatus (AASHTO) - Water permeability apparatus (DIN)
Specialist Testing
- Sonic pile integrity testers - AB soil resistivity equipment - Thermal resistivity probe - Vibrating wire strain gauge equipment - Multi-position strain gauge - Oyo Elastmeter / Pressuremeter - Down-hole packers (double and single) - Seismic down-hole and cross-hole testing - P-S Suspension Logging - Borehole geophysics - televiewing, imaging, sonic, others
Fugro Middle East Company Profile
Page 13 of 13
The network offices of Fugro Middle East exist in the form of a Head Office in Dubai and associate offices with agents and joint ventures: Dubai Fugro Middle East (Regional Office) P.O. Box 2863 Dubai, United Arab Emirates. Tel. No. : + 971-4-347-4060 Fax No. : + 971-4-347-4069
E-mail : [email protected] Contact Person : Christiaan Vermeijden, Managing Director
Abu Dhabi Fugro Middle East P.O. Box 4447 Abu Dhabi, United Arab Emirates Tel. No. : + 971-2-554 2891 Fax : + 971-2-554 2098 E-mail : [email protected] Contact Person : Sajid Amin, Branch Manager Qatar Fugro Peninsular P.O. Box 47167 Doha, State of Qatar Tel. No. : + 974-4460-1075 Fax No. : + 974-4460-1076 E-mail : [email protected] Contact Person : Peter Brooke, Branch Manager Oman Fugro Middle East & Partners P.O. Box 1334 Ruwi PC 112, Muscat, Sultanate of Oman Tel. No. : + 968-2459-6593 Fax No. : + 966-2459-6769 E-mail : [email protected] Contact Person : Tim Lyle, Manager Geotechnical Division Bahrain Fugro Middle East - Bahrain P.O. Box 70138 Sitra, Manama, Kingdom of Bahrain Tel. No. : + 966-3-857-4200 Fax No. : + 966-3-857-2035 E-mail : [email protected] Contact Person : Erik Hordijk, General Manager Sharjah Fugro Maps P.O. Box 5232 Sharjah, United Arab Emirates. Tel. No. : +971-6-5725411 Fax No. : +971-6-5724057 E-mail : [email protected] Contact Person : Paul Seaton, General Manager Websites: Fugro NV : www.fugro.nl
Fugro Middle East BV : www.fugrome.com
FUGRO MIDDLE EAST
Organization Chart
ICT
Engineer
QatarPROs
FUGRO MIDDLE EAST July 2010
Managing Director
Finance Controller
Regional Laboratory
Manager
Human Resources &
Administration Manager
Regional Operations
Manager
Human Resources
HSE Admin
QA Dubai
Abu Dhabi
QA / HSE
ManagerEngineering
Manager
General Manager
Personal Assistant to Managing Director
Dubai
Abu Dhabi
Qatar
Oman
Dubai
Abu Dhabi
Qatar
Oman
Dubai
Abu Dhabi
Oman
Qatar
Oman
Iraq
Commercial Manager
ISSUED BY APPROVED BY DATE REVISION PAGEHR Manager Managing Director 1/07/2010 0 1
FME – ORGANIZATIONAL STRUCTURE 2010
Geophysics Iraq Branch
Bahrain Branch
Qatar Branch
OmanBranch
Abu Dhabi BranchLoad Test
Pavement Management
Services
FUGRO MIDDLE EAST
Major Project List
Fugro Middle East SELECTION OF NOTABLE PROJECTS
Project Name Client Type of Work Value (k) EUR
Completion Date
Additional Berth Jebel Ali – Terminal 2 and Terminal 3 DP World
• Nearshore Geotechnical • Onshore Geotechnical • Marine geophysical Survey
375 May-12
Jizan Refinery and Terminal KBR
• Nearshore Geotechnical • Onshore Geotechnical • Bathymetric Survey • Marine geophysical Survey
860 Mar-12
Moon Island and Palm Jebel Ali Island Nakheel
• Onshore Geotechnical
602 Dec-11
Geotechnical Investigation Service Contract X0114 for Etihad Rail Etihad Rail • Onshore Geotechnical 922 Ongoing
Jazan Economic City Port Jazan Economic City Co. Ltd.
• Nearshore Geotechnical • Onshore Geotechnical • Bathymetric Survey • Marine geophysical Survey
2,300 Dec-11
Development of 16 offshore locations, Abu Dhabi CNIA - Abu Dhabi Government
• Nearshore Geotechnical • Onshore Geotechnical
1,200 ongoing
Majnoon Oil Field Development, South Iraq
Shell Iraq Petroleum Development
• Onshore Geotechnical • Topographic Survey 1,400 Nov-11
U.A.E. Nuclear Power Plant - Silla, Abu Dhabi
Fugro William Lettis & Associates c/o KEPCO and ENEC
• Nearshore Geotechnical • Onshore Geotechnical 1,800 Feb-12
Masdar Wide City, Abu Dhabi Abu Dhabi Future Energy Company
• Onshore Geotechnical • Surface Geophysics 1,000 Nov-11
Port of Aden Extension Works, Yemen DP World
• Nearshore Geotechnical • Onshore Geotechnical • Bathymetric Survey
393 Mar-11
Ruwais Refinery Expansion Project - Pack 7, Abu Dhabi Daewoo • Onshore Geotechnical 785 Dec-10
Integrated Gas Development (IGD), Das Island, UAE Hyundai Heavy Industries
• Nearshore Geotechnical • Onshore Geotechnical • Bathymetric Survey
2,300 Nov-10
Ruwais NGL 4th Train, Abu Dhabi Petrofac • Onshore Geotechnical • Surface Geophysics 761 Jun-10
Zirku Island Sarb Development, Abu Dhabi ADMA-OPCO • Onshore Geotechnical
• Borehole Geophysics 376 May-10
Oman Barka III - IPP GS Engineering and Construction
• Nearshore Geotechnical • Onshore Geotechnical 210 Apr-10
Jebel Hafeet Glacier Development - Al Ain, Abu Dhabi Tamouh Investments • Onshore Geotechnical
• Surface Geophysics 407 Mar-10
Ruwais Refinery Expansion Project - Pack 2, Abu Dhabi
GS Engineering and Construction • Onshore Geotechnical 611 Feb-10
Fugro Middle East SELECTION OF NOTABLE PROJECTS
Habshan - Shah - Ruwais Sulphur Transport, Abu Dhabi Worley Parsons • Onshore Geotechnical 870 Jan-10
Borouge 3 Site Preparation/Reclamation, Abu Dhabi
Al Asab Contracting • Onshore Geotechnical • Topographic Survey 726 Dec-09
Ras Tanura Refinery Expansion, Saudi Arabia Worley Parsons c/o ARAMCO • Nearshore Geotechnical 631 Sep-09
GCS Expansion and Additional Pipelines, Dubai Dubai Supply Authority • Onshore Geotechnical 323 Jul-09
Mina Al Ahmadi Solid Sulphur Handling Terminal, Kuwait
ThyssenKrupp C/O Kuwait National Petroleum Company
• Nearshore Geotechnical • Bathymetric survey 738 Jun-09
Jordan Railway Tunnels along Aqaba Dar Al Handasah Consultants • Onshore Geotechnical 575 May-09
Installation of Monitoring Wells, Abu Dhabi Worley Parsons • Onshore Geotechnical 240 May-09
Abu Dhabi, Taweelah-Fujairah Pipeline STG • Onshore Geotechnical 394 Apr-09
Saadiyat Island Cultural District, Abu Dhabi AECOM • Onshore Geotechnical 540 Feb-09
Additional Tanks at Qurun, Oman Target Engineering • Onshore Geotechnical 856 Jan-09
Shah Gas Development, Abu Dhabi GASCO • Onshore Geotechnical
• Aerial Survey 2,600 Nov-08
Noor Al Ain Development, Abu Dhabi Cebarco (Bahrain) • Onshore Geotechnical 660 Sep-08
Dubai Water Front – Jebel Ali Nakheel/Mouchel • Nearshore Geotechnical • Onshore Geotechnical 380 Aug-08
The World Islands, Dubai Nakheel • Nearshore Geotechnical • Onshore Geotechnical 391 Jun-08
Expansion of Abu Dhabi International Airport SCADIA • Onshore Geotechnical
• Geophysical Survey 3,500 Apr-08
The Lagoons Sama Dubai • Onshore Geotechnical 1,120 Mar-08
Qatar – Bahrain Causeway QBC Committee c/o Middle East Dredging Company • Nearshore Geotechnical 5,600 Feb-08
The Burj, Dubai, UAE Nakheel • Onshore Geotechnical 1,400 Jan-08
Abu Dhabi Crude Oil Export Pipeline IPIC • Onshore Geotechnical 534 Oct-07
Borouge 2 at Ruwais, Abu Dhabi Al Jaber Contracting • Onshore Geotechnical 388 Aug-07
Dubai Metro (Red and Green line) JT Metro JV • Onshore Geotechnical 2,600 Apr-07
South Pars Phase 17&18, Iran Iranian offshore Eng & Const. • Nearshore Geotechnical 418 Nov-06
New Oil Refinery at Al Zour, Shuaiba Port, Kuwait
Flour C/O Kuwait National Petroleum Company
• Nearshore Geotechnical • Bathymetric Survey 1,500 Jul-06
FUGRO MIDDLE EAST
Company Registration &
Accreditation Certificates
Mhblry or TridcCorpcobs RcShtr.alon Otf eForcign Comp|nic! S{ai,oncD | 2900
ttarc: 4 tl la0ll
iJ,+31iJrjJ
ir.t+i isJ,r(p; 9rr..g*: ;.;r-y'Rcsistnaion licensc OfA for€ipn ComDrnv,s rcprcacnt.tion OmcG
o"!i, e-'$ r. \ I /r/rd ar,.rt r ( . . /o! I &.i rrfi b lfr',&.,_
9r ei cE t d+ JJ+J!
Frgro Mirldle nrrt B.V
ciJt tt q-----l L*id
lr&r ajr-. rr ri. r,./$lr Jrri.! ,r4.$ JiFr cD ti'r"x .:.J"t ca.ilr .$* en(.) dr i;6! i+r..tu cr*J.tu Eatr' er3., er' /E !. (tdtr-.)rrrdrrrfl
.rAi9"l tUA 'i3l-sJ-n d+-+., .
r.r1/i/ F_
..!lr-,ll .--+rJ*.:tjL:jll tjlJJ
.i+qy / c,lr.}Jr J+.J
t ' '/t i (: a:)Lrr
( r.i+.;riL!.!d!!,..,, iilr ir, i-lrtL s:r,ri )\i\r lnJs \r. \xhf l\\crlLl, rdls(o|{ca.h
i+"iJr +rrl.tr ; o, r,.+l J+. JJ5Ji rlJ- Jijjj ,ri!./Jt\ 1rl i I r r.4.i ,Lrlr / JlrL / 1l d,ll
sj\! dl-_.rl /r
'.'. ! ! j6.r.r 'c.. rri.gl J,+-i-;js --!,!-.3u&J-ti!., rxFr ll.tfu r rJ! ,ixj ,sr- iilr iJj, !Lij' ,:l.JJ_.lr ern 3'' r, Ji 2.j!:_rrr J#r!l j. #ie rJ !!1,11 "*! i+ri c. ' c
^ t i-ir A l) i:;rr
,+ctt
!i!i.!!r;...,4!r'{+{,r, _rrr+}u':rF j J,!!ui!
.alAr!)rP'u t* +) jP
.!tt a. 4-
FUGRO MIDDLE EAST
Major Equipment Profiles
NEARSHORE EQUIPMENT – SELF ELEVATING PLATFORMS GEO GIANT
Type: Hydraulic Self-Elevating Platform Dimensions: 7.0 x 6.4 meters Leg Configuration: 4 x 13 meters Weight: 17 tonnes Operational water depth: up 10 meters (conditional to leg penetration and tide levels)
GULF GIANT
Type: Hydraulic Self-Elevating-Platform Dimensions: 9.2 x 7.4 meters Leg Configuration: 4 x 18 meters Weight: 40 tonnes Operational water depth: up to 15 meters (conditional to leg penetration and tide levels)
CORAL GIANT
Type: Hydraulic Self-Elevating-Platform Dimensions: 9.2 x 7.4 meters Leg Configuration: 4 x 22 meters Weight: 40 tonnes Operational water depth: up to 18 meters (conditional to leg penetration and tide levels)
ROCK GIANT Type: Hydraulic Self-Elevating-Platform Dimensions: 9.2 x 7.4 meters Leg Configuration: 4 x 22 meters Weight: 40 tonnes Operational water depth: up to 20 meters (conditional to leg penetration and tide levels)
SEA GIANT Type: Hydraulic Self-Elevating-Platform Dimensions: 12.5 x 10.0 meters Leg Configuration: 4 x 30.0 meters Weight: 86 tonnes Operational water depth: up to 25 meters (conditional to leg penetrations and tide levels)
EDECO – TRAVELLER T30 Drill Size Rated Capacity NQ 500m HQ 350m PQ 150m NW 480m 6” Auger 40m Subject to suitable ground conditions Mast of fabricated steel section lattice construction, with carriage guidance angles on the front face. Incorporates a long stroke hydraulic ram and wire rope reefing system for rotary head travel. Capacity: 7.500 kg Pull out: 5,300 kg Pull down: 3,250 kg Drilling stroke: 3.8 m Drill feed: 0 – 6.3 m/min (fully variable) Rapid traverse of approx 34 m/min Control: Hydraulic Control Console conveniently situated at the Driller Stand, with all necessary controls and gauges. Rower Unit: Deutz BF4L1011 air-cooled turbo charged Diesel Engine (47 kW at 2600 rpm). Complete with Heavy-duty air cleaner and filtration.
Piezo-Cone Penetration Testing
FUGRO’s electric Piezo-CPT probe equipped with
pressure sensors
20-tonne truck
16-tonne crawler unit
12-tonne crawler unit (for sites with
limited access).
Pore water pressure
Tip Resistance
Sleeve Friction Resistance
