Click here to load reader
Upload
suhail-ahmed-khan
View
4
Download
0
Embed Size (px)
DESCRIPTION
Frequency Modulation
Citation preview
COMSATS Institute of Information Technology
Park Road, Islamabad
Department of Electrical Engineering
Course Title: Analog Communications
Course code: EE 352
Semester: 5th.
Course Instructor: Arooj Mubashara
Lab 8
Frequency Modulator and Demodulator in MATLAB
Marks(10,10) Students Name: Reg. No
( , ) _________________ ____________________
( , ) _________________ ____________________
_________________
Date
____________________
Signed By
Description:-
FM means variation in the frequency of the carrier according to the amplitude of the message signal.The FM can be done by simply multiplying he message signal with carrier .At the demodulation again carrier will be multipliedwith the modulated signal.In frequency modulation the instantaneous frequency is linearly proportional to the magnitude of the modulating wave. Louder tones with AM mean greater changes in amplitude. Louder tones with FM mean greater changes in frequency.
Tasks:-1. Generate the waveform message signal. (Sinusoidal, square
or triangular) code diagram
2. Generate a sinusoidal waveform as carrier which should be of much higher frequency as compared to the message signal.
code diagram
3. Modulate the message and again observe its spectral components.
code diagram
4. Demodulate the message signal and again observe its spectral components.
code diagram
Note:-Briefly explain your understanding of FM with its mathematical theory. Perform both Frequency modulation and demodulation and observe their spectral components. After demodulations observe that the signal is re-translated to original spectral components.The report should contain the block diagram of the system with both time domain and frequency domain plots.
COMSATS Institute of Information Technology
Park Road, Islamabad
Department of Electrical Engineering
Course Title: Analog Communications
Course code: EE 352
Semester: 5th.
Course Instructor: Arooj Mubashara
Lab 8
Frequency Modulator and Demodulator in MATLAB
Marks(10,10)
Students Name:
Reg. No
( , )
_________________
____________________
( , )
_________________
____________________
_________________
Date
____________________
Signed By
Description:-
FM means variation in the frequency of the carrier according to the amplitude of the message signal.
The FM can be done by simply multiplying he message signal with carrier .At the demodulation again carrier will be multiplied with the modulated signal.
In frequency modulation the instantaneous frequency is linearly proportional to the magnitude of the modulating wave. Louder tones with AM mean greater changes in amplitude. Louder tones with FM mean greater changes in frequency.
Tasks:-
1. Generate the waveform message signal. (Sinusoidal, square or triangular)
code
diagram
2. Generate a sinusoidal waveform as carrier which should be of much higher frequency as compared to the message signal.
code
diagram
3. Modulate the message and again observe its spectral components.
code
diagram
4. Demodulate the message signal and again observe its spectral components.
code
diagram
Note:-Briefly explain your understanding of FM with its mathematical theory. Perform both Frequency modulation and demodulation and observe their spectral components. After demodulations observe that the signal is re-translated to original spectral components.The report should contain the block diagram of the system with both time domain and frequency domain plots.