Upload
lynhan
View
214
Download
1
Embed Size (px)
Citation preview
SOLID STATE AREA L IGHTINGPROJECT NAME:
D S S 1 PATENT PENDING
D S S 2 PATENT PENDING
S P E C I F I C A T I O N S
D S S S E R I E S - L E D
30"762mm
23.5"597mm
20"508mm
15"381mm
FIXTURE TYPE:
2018022
HOUSING Upper housing is heavy gauge cast aluminum (DSS1) or 0.125" thick spun aluminum with reveal (DSS2). Lower housing is 0.080" thick spun aluminum with integrated LED module seat. Lower housing is vented at top and bottom for convective cooling of LED module. Top Driver chamber is sealed from LED Module chamber. Trulevel ball coupling mount is welded to housing and facilitates quick leveling and installation.
OPTICAL MODULELow copper A356 alloy (<.2% copper) cast aluminum housing. Integrated clear tempered glass lens sealed with a continuous silicone gasket protects emitters (LED's) and emitter Reflector-Prism optics, and seals the module from water intrusion and environmental contaminants. Module is sealed to meet an IP67 rating. Each emitter is optically controlled by a Reflector-Prism injection molded from H12 acrylic (3 types per module; one from 0° - 50°; one from 50° - 65°; one from 65° - 72°). Each Reflector-Prism has indexing pins for aiming and is secured to an optical plate made of matte black anodized aluminum. The optical plate locates every Reflector-Prism over an emitter. Reflector-Prisms are secured to the optical plate with a UV curing adhesive. The Reflector-Prisms are arrayed to produce IES Type II, III, IV, and V-SQ distributions. The entire Optical Module is field rotatable in 90° increments. Both module and drivers are factory wired using water resistant, insulated cord.
LED DRIVERDrivers are UL and cUL recognized mounted on a single plate and factory prewired with quick-disconnect plugs. Constant current driver is electronic and has a power factor of >0.90 and a minimum operating temperature of -40°F. Drivers accept an input of 120-277V, 50/60Hz or 347-480V, 50/60Hz. (0 - 10V dimmable driver is standard. Driver has a minimum of 3KV internal surge protection. Luminaire supplied with 20KV surge protector for field accessible installation.)
LED EMITTERSHigh output LED's are utilized with drive currents ranging from 350mA to 1050mA. 70CRI Minimum. LED’s are available in standard Neutral White (4000K), or optional Cool White (5000K) or Warm White (3000K). Consult Factory for other LED options.
AMBER LED’sPCA (Phosphor Converted Amber) LED’s utilize phosphors to create color output similar to LPS lamps and have a slight output in the blue spectral bandwidth. TRA (True Amber) LED’s utilize material that emits light in the amber spectral bandwidth only without the use of phosphors.
FINISHElectrostatically applied TGIC Polyester Powder Coat on substrate prepared with 20 PSI power wash at 140°F. Four step iron phosphate pretreatment for protection and paint adhesion. 400°F bake for maximum hardness and durability. Texture finish is standard.
®
U.S. Architectural L ight ing660 West Avenue O, Palmdale, CA 93551Phone (661) 233-2000 Fax (661) 233-2001www.usaltg.com
S P E C I F I C A T I O N S
DSS SERIES - LED
DSS2 E.P.A.= 0.71Available in:80, 64 & 48LED Module
MODULES®
MOUNTING STYLESXPD
3" I.D.
XPS
ARM BRACKET EXTRUDED AND CAST ALUMINUM CONSTRUCTION,
WALL PLATE21.5"
(546mm)18.25"(464mm)
4.5"(114mm)
3" (89mm)
WALL MOUNT
.50" DIA. (13mm)
(4) HOLES
24"(610mm)
42"(1069mm)
42"(1069mm)
3" I.D.
24"(610mm)
42"(1041mm)
24"(610mm)
80 LED Module
DSS1 E.P.A.= 1.72Available in:120, 100, 80 & 64LED Module
120 LED Module
DSS1
DSS2
FINISH OPTIONS
DARK BRONZERAL-8019-T
GREENRAL-6005-T
WHITERAL-9003-T
GREYRAL-7004-T
BLACKRAL-9005-T
STANDARDTEXTURED FINISH
OPTICS
IES DISTRIBUTION TYPE
ARM MOUNT
VOLTAGE MOUNTING
# of LED’s
DSS1VLED - II . . . .(Type-II)
VLED - III . . . .(Type-III)
VLED - IV . . . . .(Type-IV)
VLED - VSQ . .(Type-VSQ)
DRIVE CURRENT
100LED1
120LED1
64LED
80LED
DSS2
64LED1
48LED
80LED1
®
XPD XPS
MAX INPUT WATTAGE# OF LED’s120100806448
350mA131W110W91W70W53W
525mA198W164W130W105W79W
DRIVE CURRENT
ARMS ARE HEAVY WALL EXTRUDED ALUMINUM CONSTRUCTION. FOR ADDITIONAL ARM OPTIONS SEE ARM SECTION OF USALTG.COM WEBSITE
S P E C / O R D E R I N G I N F O R M A T I O NSpec/Order Example: DSS1/VLED-II/64LED-350mA/NW/480/XPS1/RAL-7004-S/HS
MODEL
MODEL LEDOPTICS VOLTAGE MOUNTING FINISH OPTIONS
LED MODE
OTHER LED COLORSAVAILABLE
CONSULT FACTORY
COLOR
NW (4000K)*STANDARD
CW (5000K)
WW (3000K)
120
208
240
277
347
480
700mA
525mA
350mA
TWIST LOCKRECEPTACLE ONLY . . .TPR
SINGLE FUSE (120V. , 277V) . . . . . .SF
DOUBLE FUSE(208V. , 240V) . . . . . .DF
PHOTO CELL + VOLTAGE(EXAMPLE: PC120V) . .PC+V
HOUSE SIDE SHIELDEDREFLECTOR PRISMS . . HS-VLED
TWIST LOCKPHOTO CELL+VOLTAGE(EXAMPLE TPC120V) . TPC+V
7-PIN TWIST LOCKRECEPTACLE ONLY . . TPR7
REMOTE MOTION SENSORCONFIGURATOR . . . . MS-FC10
STEP DIM MOTION SENSOR (PROGRAMMED 50/100). . . . . . . . . . . . . . . . . . MS-F211
HIGH-LOW DIMMING FORHARDWIRED SWITCHING ORNONINTEGRATED MOTIONSENSOR . . . . . . . . . . . HLSW
AMBER2
PHOSPHOR CONVERTED AMBERPCA
TRUE AMBER3
TRA
NOTES:1 - NOT AVAILABLE IN 700mA
2 - NARROW BAND AMBERS HAVE NO DEFINABLE CCT EQUIVALENT
3 - AVAILABLE IN 350mA & 525mA DRIVE CURRENTS ONLY
WM . . . . . . . . . .
WALLMOUNT
4-90 . . . . . . . . . .
2-180 . . . . . . . . .
3-120 . . . . . . . . .
1 . . . . . . . . . . . . . . .
FOR SMOOTH FINISH REPLACE SUFFIX “T”
WITH SUFFIX “S”(EXAMPLE: RAL-9500-S)
SEE USALTG.COM FOR ADDITIONAL COLORS
U.S. Architectural L ight ing660 West Avenue O, Palmdale, CA 93551Phone (661) 233-2000 Fax (661) 233-2001www.usaltg.com
SEE USALTG.COM FORADDITIONAL ARM STYLES
DSS SERIES - LED
U.S. Architectural L ight ing
INITIAL LUMENS -4000K
L70 GREATER THAN (HR)
54,000+
STARTINGTEMP.
-20°F
VOLTS
120277347
SYSTEMWATTS
55
MAXINPUT AMPS
0.460.200.16
LEDCOUNT
48
SOURCETYPE
LED
SOURCE
48 Optical Module - 350mA
54,000+ -20°F 120277347
79 0.660.290.23
48 LED 48 Optical Module - 525mA
54,000+ -20°F 120277347
109 0.910.400.32
48 LED 48 Optical Module - 700mA
54,000+ -20°F 120277347
70 0.590.260.21
64 LED 64 Optical Module - 350mA
54,000+ -20°F 120277347
108 0.900.390.32
64 LED 64 Optical Module - 525mA
54,000+ -20°F 120277347
134 1.120.490.39
64 LED 64 Optical Module - 700mA
54,000+ -20°F 120277347
85 0.770.310.25
80 LED 80 Optical Module - 350mA
54,000+ -20°F 120277347
130 1.090.470.38
80 LED 80 Optical Module - 525mA
54,000+ -20°F 120277347
167 1.400.610.49
80 LED 80 Optical Module - 700mA
7,131 –7,452
9,994 –10,444
12,408 –13,005
4,241 –4,760
5,871 –6,557
7,515 –8,131
5,255 –5,898
7,393 –8,257
9,927 –10,405
INITIAL LUMENS -3000K
6,273 –6,556
8,770 –9,166
10,863 –11,386
3,731 –4,187
5,152 –5,755
6,579 –7,119
4,623 –5,189
6,488 –7,246
8,691 –9,110
INITIAL LUMENS -5000K
7,292 –7,620
10,228 –10,689
12,707 –13,318
4,337 –4,868
6,009 –6,711
7,696 –8,327
5,373 –6,031
7,566 –8,451
10,166 –10,655
L E D / E L E C T R I C A L G U I D E
®
®
®
®
®
®
®
®
®
NOTES:1.2.3.4.
5.
Max Input Amps is the highest of starting, operating, or open circuit currentsLumen values for LED Modules vary according to the distribution typeSystem Watts includes the source watts and all driver components.Fuse value should be sufficient to protect all wiring components. For electronic driver and LEDcomponent protection, use 10KV – 20KV surge suppressors.L70(9K) – TM-21 6x rule applied
WARNING: All fixtures must be installed in accordance with local codes or the National Electrical Code. Failure to do so may result in serious personal injury.
60,000+ -20°F 120277347
109 0.910.400.32
100 LED 120 Optical Module - 350mA
60,000+ -20°F 120277347
160 1.340.580.47
100 LED 120 Optical Module - 525mA
8,862 –9,620
12,261 -12,813
7,796 –8,146
10,786 –11,271
9,062 –9,469
12,537 –13,102
®
®
60,000+ -20°F 120277347
130 1.090.470.38
120 LED 120 Optical Module - 350mA
60,000+ -20°F 120277347
192 1.600.700.56
120 LED 120 Optical Module - 525mA
10,634 –11,112
14,713 –15,375
9,355 –9,776
12,911 –13,809
10,874 –11,363
15,057 –16,104
®
®
660 West Avenue O, Palmdale, CA 93551Phone (661) 233-2000 Fax (661) 233-2001www.usaltg.com