Fluoropolymers are some of themost versatile engineeringmaterials known and, since theirdiscovery over 70 years ago, havebeen used in nearly every field ofmodern industry, technology, and

science. Their non-stick proper-ties became commonly

recog-nized by theconsuming public when

E. I. DuPont beganmarketing his Teflon™brand product for useon cookware, as a fibertreatment for stainresistance, and in otherhousehold applications.

Fluoropolymer materialis recognized for its

excellent resistance toheat — up to 500°F

continuously. Lesserknown is its usefulness in

Fluoropolymer Tubing PTFE, FEP, & PFA . . . . . . . . . . . . . . . . . 2

Coiltef™ Coiled FEP tubing . . . . . . . . . . . . . . . 5

Contef™ Convoluted PTFE tubing . . . . . . . . .6

Corrtef™ Corrugated FEP tubing . . . . . . . . . . 8

Pureloc®

PFA compression fittings . . . . . . . . 9

extremely cold temperatures.Fluoropolymer will remainreasonably flexible to -100°F.

Because fluoropolymers arealmost universally inert toindustrial chemicals and solvents,their use for corrosion protectionhas become one of their largestgrowth areas. With few exceptions,fluoropolymer tubing can handlevirtually any corrosive chemical inuse today.

NewAge® Industries a wideassortment of tubing productsmade of fluoropolymers. We canmeet most any need for straighttubing, corrugated (for increasedbend radii), convoluted (for easierflush cleaning), or retractablecoiled fluoropolymer tubing,along with injection-molded PFAcompression fittings. ■

■ Adhesives & Hot Glue Delivery ■ Automotive ■ Cable Bundling ■Chemical Transfer ■ Connector Sleeves ■ Corrosives ■ Cryogenics ■Deionized Water Transfer ■ Environmental Sampling ■ Flame RetardantCovering ■ Food & Beverage Processing ■ Internal Sheathing ■ Laboratory& Medical Uses ■ Lighting Covers ■ Paint Spray Systems ■ PetrochemicalTransfer ■ Pharmaceutical Processing and Packaging ■ Pure Air Systems■ Pure Water & Fluid Systems ■ Push-Pull Cable Jacketing ■ Robotics ■Sight Glass (FEP) ■ Solvent Transfer ■ Wire Insulation ■ More

Applications

Sign up for our eNewsletter at www.newageindustries.com/extrusionsFluid Transfer Specialists ®

Fluoropolymer123c

What’s the difference?

PTFE (Polytetrafluoroethylene) a fluorocarbon-based polymer, is a resinsupplied in powdered form, which is mixed, preformed, and extruded into apaste, and then finally tubing. PTFE tubing can be used in a large variety ofapplications due to its high chemical resistance, high and low temperaturecapability, resistance to weathering, electrical and thermal insulation, andlowest coefficient of friction of any solid material. The tubing is translucentwhite in color.

FEP (Fluorinated Ethylene Propylene) resin is pelletized for its hot-meltextrusion process. FEP tubing is known for its gas and vapor permeabilityproperties and excellent UV transmission ratings. While very similar incomposition to PTFE, there are a few notable differences. FEP has a lower heatshrink temperature and is clearer and more flexible than PTFE.

PFA (Perfluoroalkoxy) resin, like FEP, belongs to a class of melt-processiblefluoroplastics. PFA tubing is also known for its gas and vapor permeabilityproperties and excellent UV transmission ratings. It is similar in composition toFEP but has better heat resistance and a smoother surface. It, too, is clearer andmore flexible than PTFE.

2 www.newageindustries.com

123cFluoropolymer Tubing P T F E , F E P , & P F A F o r m u l a t i o n s

■ Chemically inert; low permeability

■ Lowest coefficient of friction of any solid material

■ Excellent electrical and weathering properties; non-flammable

■ Made without plasticizer which can leach into critical streams

■ Free of animal derived components

■ Raw materials are FDA and USP Class VI compliant

■ REACH and RoHS compliant

■ PTFE is free of BPA, phthalates and latex

■ FEP and PFA are free of conflict minerals

■ Ultra-high-purity grades available for the semiconductor industry(FEP and PFA only)

Notes

Almost totally inert, FLUOROPOLYMERtubing can be used with virtually allindustrial solvents, chemicals, and corrosivematerials, even at elevated temperatures. Itdoes, however, react with fluorine, moltensodium hydroxide, and molten alkali metals.

FLUOROPOLYMER tubing can be steamor chemically sterilized in-line with anyindustrial cleaner, solvent, or sterilizingmethod.

FLUOROPOLYMER’s non-stick propertyallows transport of viscous, sticky materialswithout line clogging. It also offersoutstanding aging resistance.

PTFE’s translucent white color will varynaturally from lot to lot, however the qualityand physical properties do not change. FEPand PFA are clearer and can be heat sealedand heat bonded.

Permanent color striping, etching, andlonger-than-listed lengths are availablethrough minimum order. Polyethylene-jacketed, thin-wall fluoropolymer tubing, forlow-cost purity, is also available throughminimum order — call for details.

Physical Properties** PTFE FEP PFAHardness, Shore D 50-65 57-60 60Tensile Strength, psi 2000-3000 4000 4200Elongation at Break, % 200-450 400 400Brittle Temperature, °F <-450 <-450 <-450Max. Continuous Operating Temp., °F 500 400 500

**Values listed are typical for the material used in manufacture, except wherenoted, and are meant only as a guide to aid in design. Field testing should beperformed to find the actual values for your application.

Custom Services■ Cut■ Size

■ Color■ Overbraid

Call for more information: 800-506-3924 or 215-526-2300

Made in U.S.A.

■ Heat-Form**FEP & PFA only

3www.newageindustries.com

123c Fluoropolymer Tubing P T F E , F E P , & P F A F o r m u l a t i o n s

BEND RADIUS

(IN.)1/21/21/25/83/41/21

7/82-1/4

12-3/4

42-1/4

453

5-1/26

WORKINGPSI AT 73°F4123902902201802901302221001808070

1306055

1005080

FLUOROPOLYMER TUBING – PTFE, Inch Sizes

NOMINALOD (IN.)

1/163/321/8

5/323/161/41/4

5/165/163/83/8

7/161/21/2

9/165/85/83/4

NOMINALID (IN.)

1/321/321/163/321/81/8

3/163/161/41/4

5/163/83/8

7/161/21/2

9/165/8

REF.WALL(IN.).015.030.030.030.030.062.030.063.030.063.030.030.063.030.030.063.030.063

STANDARDLENGTH

(FT.)†100100

50, 10050, 10050, 10050, 10050, 10050, 10050, 100

25, 50, 10025, 50, 10025, 50, 10025, 50, 10025, 50, 10025, 50, 10025, 50, 10025, 50, 10025, 50, 100

PART NO.

300 0074300 0151300 0228300 0382300 0459300 0536300 0690300 0767300 0844300 0921300 0998300 1152300 1229300 1306300 1460300 1537300 1614300 1845

LBS. PERFT.

0.0020.0060.0090.0110.0140.0340.0200.0460.0260.0570.0320.0370.0800.0430.0490.1030.0540.126

†Sold by standard coil length only. Working pressures are calculated from burst testing using a 4:1 safety factor. Application testing is recommended.Add length suffix to part number when ordering. Example: 100 ft. of 1/32” I.D. x 1/16” O.D. tubing is part number 300 0074-100.NOTE: Orders for 50 ft. lengths of PTFE tubing may be filled with a maximum of two lengths of product totaling 50 ft.Orders for 100 ft. lengths of PTFE tubing may be filled with a maximum of three lengths of product totaling 100 ft. BOLD indicates the critical dimension for fittings application.

FLUOROPOLYMER TUBING – FEP, Inch Sizes

OD (IN.)

1/83/165/323/161/41/4

5/165/163/83/8

7/161/21/2

9/165/83/43/4

.8307/81

1.1001 1/81 3/81- 5/8

REF. ID(IN.)

1/161/163/321/81/8

3/163/161/41/4

5/163/83/8

7/161/21/25/8

11/163/43/47/811

1-1/41-1/2

WALL(IN.)

.030

.062

.030

.030

.062

.030

.062

.030

.062

.030

.030

.062

.030

.030

.062

.062

.030

.040

.062

.062

.050

.062

.062

.062

STANDARDLENGTH

(FT.)†50, 10050, 10050, 10050, 10050, 10050, 10050, 10050, 100

25, 50, 10025, 50, 100

50, 10025, 50, 10025, 50, 10025, 50, 10025, 50, 10025, 50, 100

2510 Straight

5, 10 Straight5, 10 Straight5, 10 Straight5, 10 Straight5, 10 Straight

5 Straight

PART NO.

310 0090 310 0167 310 0244 310 0321 310 0398 310 0552 310 0629 310 0706 310 0783 310 0860 310 1014 310 1091 310 1168 310 1322 310 1399 310 1707 310 1784* 310 1938* 310 2015 310 2169 310 2246* 310 2323 310 2477* 310 2631*

BEND RADIUS

(IN.)1/21/21/23/41

1-1/21-1/21-3/4

12-1/23-1/2

26

123688

122226243036

WORKINGPSI AT 73°F44561235729646022336817830714812723011189

1841537474

13211575757064

LBS. PERFT.

0.0090.0230.0110.0140.0340.0200.0460.0260.0570.0310.0370.0800.0430.0480.1030.1260.0650.0650.1490.1720.1540.1940.2400.286

*Limited stock item; lead times and minimums may apply — call for details.†Sold by standard coil length only. Working pressures are calculated from burst testing using a 3:1 safety factor. Application testing is recommended.Add length suffix to part number when ordering. Example: 50 ft. of 1/16” I.D. x 1/8” O.D. tubing is part number 310 0090-50.All FEP and PFA lengths are supplied in single-section packages. BOLD indicates the critical dimension for fittings application.

4 www.newageindustries.com

BEND RADIUS

(IN.)1/21/23/41/21

1-3/41

2-1/21

1236

WORKINGPSI AT 73°F44936029946422517931015031075

186155

FLUOROPOLYMER TUBING – PFA, Inch Sizes

OD(IN.)

1/85/323/161/41/4

5/163/83/81/2

9/165/83/4

REF. ID(IN.)

1/163/321/81/8

3/161/41/4

5/163/81/21/25/8

WALL(IN.)

.030

.030

.030

.062

.030

.030

.062

.030

.062

.030

.062

.062

STANDARDLENGTH

(FT.)†50, 10050, 10050, 10050, 10050, 10050, 100

25, 50, 10050, 100

25, 50, 10025, 100

25, 50, 10025, 50, 100

PART NO.

320 0176 320 0330 320 0407 320 0484 320 0561 320 0715 320 0792 320 0869 320 1100 320 1331 320 1408 320 1716

LBS. PERFT.

0.0090.0110.0140.0340.0200.0260.0570.0310.0800.0480.1030.126

†Sold by standard coil length only. Working pressures are calculated from burst testing using a 3:1 safety factor. Application testing is recommended.Add length suffix to part number when ordering. Example: 25 ft. of 5/8” I.D. x 3/4” O.D. tubing is part number 320 1716-25.All FEP and PFA lengths are supplied in single-section packages. BOLD indicates the critical dimension for fittings application.

FLUOROPOLYMER TUBING – PTFE, Metric Sizes

NOMINALOD (MM)

468

101214

NOMINALID (MM)

2468

1012

REF.WALL(MM)

111111

STANDARDLENGTH

(FT.)†50, 10050, 10050, 100

25, 50, 10050, 10050, 100

PART NO.

301 0175 301 0350 301 0525 301 0700 301 0875 301 1050*

BEND RADIUS

(MM)132551647689

WORKINGPSI AT 73°F2901801301008060

LBS. PERFT.

0.0200.0340.0480.0610.0750.089

123cFluoropolymer Tubing P T F E , F E P , & P F A F o r m u l a t i o n s

FLUOROPOLYMER TUBING – FEP, Metric Sizes

OD(MM)

468

101214

REF. ID(MM)

2468

1012

WALL(MM)

111111

STANDARDLENGTH

(FT.)†50, 10050, 10050, 100

25, 50, 10050, 10050, 100

PART NO.

311 0177 311 0352 311 0527 311 0702 311 0877 311 1052

BEND RADIUS

(MM)38446470

102305

WORKINGPSI AT 73°F464309232186155119

LBS. PERFT.

0.0130.0230.0320.0410.0490.059

FLUOROPOLYMER TUBING – PFA, Metric Sizes

OD(MM)

68

1012

REF. ID(MM)

468

10

WALL(MM)

1111

STANDARDLENGTH

(FT.)†50, 10050, 100

25, 50, 10050, 100

PART NO.

321 0354 321 0529 321 0704 321 0879

BEND RADIUS

(MM)446470

102

WORKINGPSI AT 73°F312234187156

LBS. PERFT.

0.0230.0320.0410.049

†Sold by standard coil length only. Working pressures are calculated from burst testing using a 3:1 safety factor. Application testing is recommended.Add length suffix to part number when ordering. Example: 100 ft. of 6mm I.D. x 8mm O.D. tubing is part number 321 0529-100.All FEP and PFA lengths are supplied in single-section packages. BOLD indicates the critical dimension for fittings application.

†Sold by standard coil length only. Working pressures are calculated from burst testing using a 3:1 safety factor. Application testing is recommended.Add length suffix to part number when ordering. Example: 50 ft. of 2mm I.D. x 4mm O.D. tubing is part number 311 0177-50.All FEP and PFA lengths are supplied in single-section packages. BOLD indicates the critical dimension for fittings application.

*Limited stock item; lead times and minimums may apply — call for details.†Sold by standard coil length only. Working pressures are calculated from burst testing using a 4:1 safety factor. Application testing is recommended.Add length suffix to part number when ordering. Example: 50 ft. of 2mm I.D. x 4mm O.D. tubing is part number 301 0175-50.NOTE: Orders for 50 ft. lengths of PTFE tubing may be filled with a maximum of two lengths of product totaling 50 ft.Orders for 100 ft. lengths of PTFE tubing may be filled with a maximum of three lengths of product totaling 100 ft. BOLD indicates the critical dimension for fittings application.

5www.newageindustries.com

123c

C o i l e d F E P T u b i n g

Coiltef ™

■ Made of chemically inert clear FEP

■ Manufactured from FDA compliant materials

■ Heat set into a retractable coil; excellent recoil memory

■ Offers all the chemical and electrical insulation properties of standard FEP fluoropolymer tubing

■ Allows flexibility to otherwise semi-rigid fluoropolymer tubing

Notes

Almost totally inert, COILTEF can be used withall industrial solvents, chemicals, and corrosivematerials even at elevated temperatures. It does,however, react with fluorine, molten sodiumhydroxide, and molten alkali metals.

Fluoropolymer’s non-stick property allowstransport of viscous, sticky material without lineclogging. It also offers outstanding agingresistance.

COILTEF is manufactured through afabrication process which heat sets the coils. Thecoils should remain stable up to 200°F. At highertemperatures the coils will begin to relax and losetheir set. If the application involves elevatedtemperatures, in-house testing is recommended.

COILTEF may be steam or chemically sterilizedin-line with any industrial cleaner, solvent, orsterilizing method. Care should be taken withsteam sterilization to prevent coil relaxation.Testing is recommended.

COILTEF can be manufactured from .085" to1/2" tubing I.D. The coil diameter can beproduced from 3/4" O.D. to 4" O.D.

PFA-formulated COILTEF is available by specialorder.

Physical Properties**

Hardness, Shore D 55-60Tensile Strength, psi 2800-5000Elongation at Break, % 250-330Brittle Temperature, °F -450Min. Operating Temp. for Tubing, °F†† -100Max. Operating Temp. for Tubing, °F†† 200

**Values listed are typical for the material used inmanufacture, except where noted, and are meant only asa guide to aid in design. Field testing should beperformed to find the actual values for your application.††Temperatures are for standard extruded (non-coiled)tubing. See “Notes” for additional information.

C

A

E

BD

C

AID

(IN.)

1/161/8

3/161/43/8

BOD(IN.)

3/161/4

5/163/81/2

D^O.D. OF

COIL(IN.)

1-1/81-1/22-1/42-3/8

4

E^MAXIMUM AVAILABLE EXPANDEDLENGTH; NOT INCLUDING TAILS

(IN.)

12, 24, 4812, 24, 48, 72

1212, 24, 48, 72

24, 48

PARTNO.

360 0072*360 0149*360 0226*360 0303*360 0457*

*Non-stock item; lead times and minimums apply — call for details.^These dimensions are nominal. Add length suffix to part number when ordering. Example: 12 inches of 1/16” I.D. x 3/16”O.D. tubing is part number 360 0072-12.The retracted length is approximately 1/4 of the maximum expanded length excludingtails.Wall thickness for all standard sizes is 1/16. Tail length (item C) is 6” for all listed sizes.

Custom Services■ Cut ■ And More

Made in U.S.A.

All Coiltef is made to order — call for details

■ SizeCall for more information

800-506-3924

Through an EmployeeStock Ownership Plan(ESOP), we’re partowners in the company,and that makes yoursatisfaction an invest-ment in our future.

Chanthou VoeurnPlastic Manu-facturing/Owner7 years

Lori StiversonMaterialsManager/Owner1 year

Brian KatchurEngineeringProcess Manager/Owner / 15 years

Meet Some of NewAge Industries’ Owners

6 www.newageindustries.com

123cContef ™

C o n v o l u t e d P T F E T u b i n g

■ Translucent PTFE tubing offers excellent chemical and electrical properties■ Available from stock with or without a stainless steel wire encircling the O.D.

■ Wire coil provides increased pressure capability and aids in electrical grounding■ Easily flexed — spiral construction allows far greater flexibility than

straight wall tubing■ Spiral construction also allows for easier cleaning■ Made from FDA compliant materials

Notes

CONTEF’s helical construction aidsin self cleaning when flushed withstandard cleaning fluids.

The cuffs (straight ends) are madeto accept standard barbed fittings. Hoseassemblies made to your specificationsare available.

PTFE’s color will vary naturally fromlot to lot, but the quality and physicalproperties do not change.

FEP CONTEF for longer continuouslengths is available through customorder.

CONTEF Without Wire:Vacuum Service: 27 in./Hg at 72°F.Convolutions are molded into the

tubing and will not cold flow into astraight wall under normal conditions.

CONTEF With Wire:Vacuum Service: 27 in./Hg at 72°F.For high vacuum applications,

CONTEF can be produced with wire onthe I.D. — call for details.

*See Terms and Conditions Agreement forLimitations

Custom Services■ Overbraid■ And More

Call for more information800-506-3924

■ Cut■ Size

E

BC

DF

(Cuff Length)

(Length Including Cuffs)

(Convolution OD)(Convolution ID)

(Wall)

†

(ID)A

Made in U.S.A.

Physical Properties**

Hardness, Shore D 50-65Tensile Strength at Break, psi 3500Elongation at Break, % 200-400Embrittlement Temperature, °F -450Min. Operating Temp. for Tubing, °F†† -100Max. Operating Temp. for Tubing, °F†† 500

**Values listed are typical for the material used inmanufacture, except where noted, and are meant only asa guide to aid in design. Field testing should beperformed to find the actual values for your application.††Temperatures are for standard extruded (non-convoluted) tubing.

Recommended Fittings & Clamps ■ Thermobarb® barbed fittings ■Oetiker® ear type clamps ■Kwik Clamp™ nylon double bond hose clamps ■Worm gear clamps

Abraham CooperWarehouse/Owner1 year

Kimly OurnSilicone MoldingSupervisor/Owner5 years

Steve MidgetteDirector of Finance &Human Resources/Owner25 years

More NewAge Industries’ Owners

Did you know . . . ?We haven’t had aproduct liability claimsince we beganmanufacturing tubing20 years ago.

123c

CONTEF Without WireBEND

RADIUS(IN.)1/23/4

1-3/41-1/41-1/21-3/42.2302-3/4

34-1/4

AID

(IN.)

1/45/163/81/25/83/41

1-1/41-1/2

2

BNOM.(IN.)3/4111

1-1/41-1/2

22-1/22-1/22-1/2

CNOM.(IN.)

.015 .020 .020 .020 .023 .025 .030 .035 .040 .043

DREF.(IN.)

.320 .414 .450 .590 .660 .7801.1001.5601.9102.450

FNOM.(IN.)

.181 .273 .303 .425 .485 .608 .8491.1501.4101.955

MAXLENGTH

(FT.) 125 125 125 100 75 75 50 40 40 40

WORKINGPSI AT72°F45484030302522212016

PART NO.

350 0070350 0147350 0224350 0301350 0378350 0455350 0532350 0609350 0686350 0763

BURSTPSI AT72°F180192160120120100

90858065

† ‘E’ dimension to be specified at time of order. All lengths will be supplied with ‘B’ dimension cuffs.All pressures are calculated and not based on actual testing.BOLD indicates the critical dimension for fittings application.

AID

(IN.)

1/4 5/16 3/81/23/41

BNOM.(IN.)3/4111

1-1/22

CNOM.(IN.)

.015 .020 .020 .020 .023 .030

DREF.(IN.).320.414.450.590.780

1.100

FNOM.(IN.)

.181 .273 .303 .425 .608 .849

BENDRADIUS

(IN.)1/23/4

1-3/41-1/41-3/42-1/4

MAXLENGTH

(FT.)121212202020

WORKINGPSI AT72°F

58 62 52 39 32 29

CONTEF With Wire

PART NO.

352 0076352 0153352 0230352 0307352 0461352 0538

BURSTPSI AT72°F234250208156130117

† ‘E’ dimension to be specified at time of order. All lengths will be supplied with ‘B’ dimension cuffs.All pressures are calculated and not based on actual testing.BOLD indicates the critical dimension for fittings application.

Contef ™

C o n v o l u t e d P T F E T u b i n g

7

Chelsea CoultonManufacturingAssistant/Owner1 year

Robert VolkExecutive Directorof Operations/Owner / 5 years

Joshua MercadoSilicone Manu-facturing/Owner1 year

Nick ScarpillTechnical SalesRep./Owner1 year

Anthony SchmidtInventory Coordi-nator/Owner9 years

Be ThachSilicone Molding/Owner1 year

www.newageindustries.comMore NewAge Industries’ Owners

Did you know . . . ?We’ve been in businessfor over 60 years.

8 www.newageindustries.com

123cCorrtef ™

C o r r u g a t e d F E P T u b i n g

■ Made from FEP fluoropolymer tubing

■ Corrugations allow a nearly zero bend radius — easily flexed

■ Can be extended or compressed without affecting the tube’s I.D.

■ Made without plasticizers which can leach into critical streams

■ Made from FDA compliant materials

■ Has all the chemical and electrical properties ofstraight-walled FEP tubing

■ May be overbraided with Kevlar® for higher pressures^

Notes

Vacuum Service at 72°F: 29.9 in./Hg.Bend Diameter at 72°F: 1/2 of tubing I.D.

Optimal flow is achieved and turbu lenceminimized by passing fluids through CORRTEF inthe direction of the corrugation angles (asillustrated).

CORRTEF is heat sealable, and the cuffs(straight ends) are made to accept standardbarbed fittings. The end may be flared orexpanded to permit shrink-tight connections.

CORRTEF is manufactured in an industrialatmosphere and should be properly sterilized forclean-flow applications. For optimal cleaning ofCORRTEF, the tube should be stretched to itsmaximum length and held vertically (direction offlow: down). Due to the annular corrugations, itmay not be possible to remove all traces ofparticulate from CORRTEF, even under optimalcleaning conditions.

^Overbraiding with Kevlar will permit aminimum increase of six times the listed pressures.Kevlar overbraiding is available for sizes up to7/8” I.D. – call for details.

Physical Properties**

Hardness, Shore D 55-60Tensile Strength, psi 2800-5000Elongation at Break, % 250-330Brittle Temperature, °F -450Min. Operating Temp. for Tubing, °F†† -100Max. Cont. Svc. Temp. for Tubing,

zero pressure, °F†† 200

**Values listed are typical for the material used inmanufacture, except where noted, and are meant only asa guide to aid in design. Field testing should beperformed to find the actual values for your application.††Temperatures are for standard extruded (non-corrugated) tubing.

Made in U.S.A.

Recommended Fittings & Clamps ■ Thermobarb® barbed fittings ■ Oetiker® ear type clamps ■ Kwik Clamp™ nylon double bond hose clamps ■ Worm gear clamps

E

BC

DA

Preferred direction of flow

†

AMAX.

ID (IN.)

1/43/81/25/83/47/81

1-1/22

BCUFF

LENGTHNOM. (IN.)*

3/4111

1-1/21-1/2

222

CWALLNOM.(IN.).015.020.025.025.030.030.035.035.040

DCORRUGA-

TION ODREF. (IN.)

3/85/83/4

15/161-1/161-1/4

1-7/161-13/16

2-5/8

PARTNO.

340 0075340 0152340 0229340 0306340 0383340 0460340 0537340 0691340 0768

WORKINGPSI

AT 72°F

625042373025201512

BURSTPSI

AT 72°F

248200168148120100

806048

† Specify ‘E’ dimension at order time. Maximum overall available length: 12 ft. (including cuffs).*Workable I.D. length of the cuff (straight ends). All lengths supplied with ‘B’ dimension cuffs.All pressures are calculated and not based on actual testing.BOLD indicates the critical dimension for fittings application.

➞

Custom Services■ Overbraid■ And More

Call for more information800-506-3924

■ Cut■ Size

(Length Including Cuffs)

Chou TeaSilicone Manufac-turing/Owner2 years

Steve KuhnsNatl. Sales Mgr. -Plastics/Owner5 years

Josh ReamSilicone Manufac-turing Supv./Owner18 years

More NewAge Industries’ Owners

Did you know . . . ?We offer drop shipmentand blind dropshipment capabilities.

9www.newageindustries.com

123c Pureloc®

P F A C o m p r e s s i o n F i t t i n g s

continued on next page

A↓

C D↓

E↓

B↓ ↓

Installation Instructions:

1. Cut tubing (A) cleanly at 90°.2. Push tubing through small end of nut (B), small end of gripper (C), large end

of ferrule (D), and seat tubing end into fitting body as far as it will go (E).3. Thread nut onto body and finger tighten while assuring that tubing

remains seated in bottom of fitting. To complete the installation, tightennut with a wrench at least one additional turn. Avoid overtightening.

1/8”1/4”3/8”1/2”3/4”

Fitting Size Recommended Tubing Size

1/8” O.D. x 1/16” I.D.1/4” O.D. x 5/32” I.D.3/8” O.D. x 1/4” I.D.1/2” O.D. x 3/8” I.D.3/4” O.D. x 5/8” I.D.

Size Recommendations:See chart below; these sizesrepresent the only fluoropolymertubing dimensions recommendedfor use with Pureloc fittings.

■ PFA body made from virgin, high purity materials

■ Ideally suited for corrosive environments and chemical applications

■ Less surface particulate resulting in cleaner operation

■ Easy to disconnect and reuse

■ Excellent lock and seal ability

■ Numerous configurations available

Shaleem ChohanSilicone Manu-facturing/Owner1 year

Mabory TavSilicone Molding/Owner6 years

Vi Sal ThachSilicone Manu-facturing/Owner1 year

More NewAge Industries’ Owners

Did you know . . . ?We acknowledge andconfirm every order toensure accuracy.

NotesWith a fitting body made from virgin, high

purity PFA fluoropolymer, PURELOC is ideal forultra-pure fluid applications where contamination-free systems are used. This includes semiconductormanufacturing, food and beverage processing,medical and biomedical, laboratory, chroma-tography equipment, and the chemical industries.

The gripper coupled with the precision-madeferrule provides excellent leak-tight connectionsand prevents tubing blow-out.

Materials of Construction:Wetted: PFA body, PTFE ferruleNon-wetted: PFA nut, titanate filled ETFE gripper

Pressure Ranges: 125 PSIG (8.6 bar); see chart below

The values above are typical for the material used in manufacture, except where noted, and are meant only asa guide to aid in design. Field testing should be performed to find the actual values for your application.

150

100

50

050 100 150 200 250 300 350

Fluid Temperature (°F)

Pre

ssur

e (p

siG

)

Pre

ssur

e (b

ar)

Fluid Temperature (°C)10 38 66 93 121 149 177

10.3

6.9

3.4

0

1/8”, 1/4”, & 3/8” 1/2” 3/4”Pressure vs. Temperature

10

123cPureloc®

P F A C o m p r e s s i o n F i t t i n g s

Male Adapter

TUBE OD(IN.) x NPT

1/8 x 1/81/8 x 1/41/4 x 1/81/4 x 1/41/4 x 3/81/4 x 1/23/8 x 1/83/8 x 1/43/8 x 3/83/8 x 1/21/2 x 1/41/2 x 3/81/2 x 1/21/2 x 3/43/4 x 1/23/4 x 3/4

PARTNO.

532 0644532 0672532 0700532 0728532 0756532 0784532 0812532 0833532 0868532 0896532 0924532 0952532 0980532 1008532 1036532 1064

Female Adapter

TUBE OD(IN.) x FNPT

1/8 x 1/81/8 x 1/41/4 x 1/81/4 x 1/41/4 x 3/81/4 x 1/23/8 x 1/43/8 x 3/83/8 x 1/21/2 x 1/41/2 x 3/81/2 x 1/21/2 x 3/43/4 x 1/23/4 x 3/4

PARTNO.

532 0028532 0056532 0084532 0112532 0140532 0168532 0224532 0252532 0280532 0308532 0336532 0364532 0392532 0420532 0448

Male 90° Elbow

TUBE OD (IN.) x NPT

1/4 x 1/81/4 x 1/43/8 x 1/83/8 x 1/43/8 x 3/83/8 x 1/21/2 x 1/41/2 x 3/81/2 x 1/21/2 x 3/43/4 x 1/23/4 x 3/4

PARTNO.

532 3080532 3108532 3192532 3220532 3248532 3276532 3304532 3332532 3360532 3388532 3416532 3444

TUBE OD(IN.) x FNPT

1/8 x 1/81/4 x 1/43/8 x 1/43/8 x 3/83/8 x 1/21/2 x 1/41/2 x 1/2

PARTNO.

532 2604532 2660532 2688532 2716532 2744532 2772532 2828

Female 90° Elbow

PARTNO.

532 4004

Reducing 90° Elbow

TUBEOD (IN.)

1/81/43/81/23/4

PARTNO.

532 3621532 3640532 3696532 3724532 3752

Union 90° Elbow

TUBE OD xTUBE OD (IN.)

3/8 x 1/2

TUBEOD (IN.)

1/81/43/81/23/4

PARTNO.

532 6860532 7056532 7252532 7448532 7644

Nut Replacement Kit

Contains one nut, one gripper, and one ferrule

Jalisa GonzalezSilicone Molding/Owner1 year

Marty GolinTerritory SalesRep./Owner14 years

Anthony NghiemQuality Inspector/Owner1 year

More NewAge Industries’ Owners

Did you know . . . ?90% of RFQ’s (Requestsfor Quotation) areformally quoted thesame day.

11

123c

TUBEOD (IN.)

1/81/43/81/23/4

PARTNO.

532 6132532 6160532 6188532 6216532 6244

Union Tee

Reducing Union Connector

TUBE OD xTUBE OD (IN.)

1/8 x 1/41/4 x 3/81/4 x 1/23/8 x 1/21/2 x 3/4

PARTNO.

532 1764532 1820532 1848532 1876532 1904

Union Connector

TUBEOD (IN.)

1/81/43/81/23/4

PARTNO.

532 1484532 1512532 1540532 1568532 1596

TUBE OD(IN.) x NPT

1/4 x 1/81/4 x 1/43/8 x 1/83/8 x 1/43/8 x 3/83/8 x 1/21/2 x 1/41/2 x 3/81/2 x 1/23/4 x 3/4

PARTNO.

532 4697532 4732532 4760532 4788532 4816532 4844532 4872532 4900532 4928532 4956

Male Branch Tee

TUBE OD(IN.) x NPT

1/4 x 1/81/4 x 1/43/8 x 1/41/2 x 1/41/2 x 1/23/4 x 3/4

PARTNO.

532 5656532 5684532 5796532 5880532 5936532 5964

Male Run Tee

Bulkhead Union

TUBEOD (IN.)

1/81/43/81/23/4

PARTNO.

532 2072532 2100532 2128532 2156532 2184

Pureloc®

P F A C o m p r e s s i o n F i t t i n g s

Khoeuth SomFabrication/Manu-facturing/Owner13 years

Alex KakadProduct MarketingManager/Owner1 year

Lauren MunyonSilicone Molding/Owner1 year

Craig ZelinBuyer/Planner/Owner1 year

Evan FryeQuality Technician/Owner6 years

Sopha PenSilicone Molding/Owner1 year

Lawrence MoranoGlobal SalesManager/Owner3 years

Lena LiepSilicone Molding/Owner5 years

MichaelArmstrongQuality Inspector/Owner1 year

Thea SemWarehouse/Owner1 year

Petro PhengSilicone Manu-facturing/Owner1 year

Tom SlovikQuality ControlInspector/Owner9 years

www.newageindustries.comMore NewAge Industries’ Owners

Did you know . . . ?We’re solar powered.4,000 solar panels on our building’s rooftopprovide one megawatt of electricity annually.

DISTRIBUTOR PARTNER 800-50-NEWAGE(800-506-3924)

215-526-2300Fax: 800-837-1856

215-526-2190info@newageindustries.com

145 James WaySouthampton, PA 18966www.newageindustries.com

Coiltef, Contef, Corrtef, Hot Bond, Kwik Clamp, Pureloc, Thermobarb, NewAge, “Fluid Transfer Specialists,” The "N" Logo, and AdvantaPure are trademarks of NewAge® Industries, Inc. • Oetiker reg. TM Oetiker, Inc. • Hytrel reg. TM E. I. du Pont de Nemours and Company • Teflon and Viton trademarks The Chemours Company

NOTICE: NewAge Industries, Inc. has been a privately owned corporation since 1954. Neither the corporation nor its principals are affiliated, in any way, with any other group or entity either representing themselves as or being referred to by the term New-Age.

WARRANTY: NewAge Industries’ products are warranted to be free from defects in material and workmanship. Any product found to carry such defects will be replaced without charge. This warranty is limited only to the replacement of NewAge Industries' products, item for item, which after examinationby NewAge Industries are deemed defective. NewAge Industries specifically disclaims any other liability. The data supplied is provided as a helpful guideline and is believed to be reliable; however, nothing stated shall constitute a guarantee, recommendation, or warranty for any application.

8/4/17© NewAge Industries, Inc. 2017 Specifications are subject to change without notice.

More NewAge Industries Products

123c

Custom ServicesCut

SizeColorCoilOver-

braidHeat Form

Hot Bond®Assemblies

HardnessMore

Tubing & HosePVCPolyurethaneSiliconeFluoropolymerNylonPolyethylenePolypropyleneTPRViton™LatexHytrel®

High Purity Tubing & HoseSanitary tubing, hose, fittings,assemblies, and molded componentsfrom our AdvantaPure division meetthe needs of the pharmaceutical,biotech, food and beverage, dairy,cosmetics and fragrances, and chemicalindustries, as well as other sanitaryapplications. AdvantaPure products areavailable through a network of selectdistributors. www.advantapure.com

Fittings & Clamps for FluoropolymerPureloc® - PFA compression fittings. Stock sizes for 1/8” to 3/4” O.D. in 13 styles. Made from chemically inert fluoropolymer.Thermobarb® Plastic - Precision molded barbed fittings in nylon-6, high density polyethylene, PVDF, polypropylene, reinforced nylon, or reinforced poly- propylene. Sizes for 1/8” to 1” I.D. tubing in 15 styles.

Thermobarb® Brass - Durable brass barbed fittings. Sizes for 1/8” to 1” I.D. tubing in 10 styles.

Oetiker® Ear Type Clamps - Stainless steel or zinc- plated carbon steel clamps with a unique breathable design. 35 sizes from 5/32” to 1-9/16” in 3 styles.

Kwik Clamp™ - Nylon double-bond hose clamps. 31 sizes from 1/4” to 4-1/4” nominal O.D.

Worm Gear Clamps - Stainless steel worm screw clamps. 28 sizes from 3/8” to 6” in 6 styles.

Tubing & Hose Cutting Tools