1
Fluorescent Lighting Subject to modifications without notice Pepperl+Fuchs Group www.pepperl-fuchs.com USA: +1 330 486 0002 [email protected] [email protected] Singapore: +65 6779 9091 [email protected] Copyright Pepperl+Fuchs Germany: +49 621 776 2222 1.2 D1 148 D3 D2 D4 120 149 Ø10.3 B A All Dimensions in mm. Calstar - Ex d Fluorescent Fitting for 8 to 58 Watt Lamps Material All cast parts - light metal alloy Overtube - borosilicate glass / polycarbonate Reflector - 1.2mm galvanized mild steel Finish Cast metal parts - epoxy powder coated - RAL7032 Reflector – epoxy powder coat – white Cover Fixing M6 allen head stainless steel screws Gasket Nitrile O ring Earthing Internal Entries 1 x 20mm Ex d threaded hole at A and B. Both entries are fitted with Ex d stopping plugs Mounting 2 x Stainless Steel removable mounting brackets supplied as standard ENCLOSURE SPECIFICATION Control gear High frequency electronic ballast complying with all European standards relating to safety, operation and EMC (Immunity) Operating voltage 220 – 254 Volts 50/60Hz Operating current 0.5 Amps Power factor 0.98 Terminals 2.5mm² connection block suitable for through wiring Lamps Bi-pin Fluorescent tube, T5 for 8W, T8 for all other fittings EMC To EN55015:2000 ELECTRICAL SPECIFICATION HAZARDOUS AREA SPECIFICATION Marking to 94/9/EC II 2 GD Type of Protection 500 series Ex d IIB T* Gb Ex tb IIIC T**°C Db 600 series Ex d IIC T* Gb Ex tb IIIC T**°C Db Ambient Temp.°C Gas Temperature Class (T*C) Dust Temperature Class (T**)(°C) Min Max -20 +40 T6 85 -20 +55 T5 100 -20 +60 T4 135 Ingress Protection Glass overtube - IP67 to EN60529:1992 poylcarbonate over tube - IP6X to EN60529:1992 Area Classification Zones 1,2,21,22 Certification No. SIRA00ATEX1107X GOST-R POCC GB.Mл14.B00223 GAS GROUPS IIA AND IIB GAS GROUPS IIC Wattage Lamp Length (mm) Weight (Kg) Product Code Wattage Lamp Length (mm) Weight (Kg) Product Code 1 x 8 Watts 300 2.5 500/0211 1 x 8 Watts 300 2.5 600/0211 1 x 18 Watts 600 5.0 500/0103 1 x 18 Watts 600 5.0 600/0103 2 x 18 Watts 600 5.2 500/0121 2 x 18 Watts 600 5.2 600/0121 1 x 36 Watts 1200 7.0 500/0109 1 x 36 Watts 1200 7.0 600/0109 2 x 36 Watts 1200 7.2 500/0127 2 x 36 Watts 1200 7.2 600/0127 1 x 58 Watts 1500 8.0 500/0115 1 x 58 Watts 1500 8.0 600/0115 2 x 58 Watts 1500 8.3 500/0133 2 x 58 Watts 1500 8.3 600/0133 ORDERING INFORMATION Note: Append ‘P’ to the product code for a polycarbonate over tube e.g. 500/0133P Add /WG to part number if a wire guard is required Pepperl+Fuchs light fittings are not supplied with lamps Other mounting options available Model D1 D2 D3 D4 8 Watts 653mm 330mm 649mm 390mm 18 Watts 915mm 592mm 911mm 652mm 36 Watts 1514mm 1191mm 1510mm 1251mm 58 Watts 1820mm 1497mm 1816mm 1557mm

Fluorescent Lighting - ESI.info Lighting Subject to modifications without notice Pepperl+Fuchs Group USA: +1 330 486 0002 [email protected] [email protected]

  • Upload
    lehuong

  • View
    234

  • Download
    3

Embed Size (px)

Citation preview

Page 1: Fluorescent Lighting - ESI.info Lighting Subject to modifications without notice Pepperl+Fuchs Group USA: +1 330 486 0002 pa-info@us.pepperl-fuchs.com pa-info@de.pepperl-fuchs.com

Fluorescent Lighting

Subject to modifications without notice

Pepperl+Fuchs Groupwww.pepperl-fuchs.com

USA: +1 330 486 [email protected] [email protected]

Singapore: +65 6779 [email protected]

Copyright Pepperl+Fuchs

Germany: +49 621 776 2222

Calstar - Ex de Emergency Fluorescent Fitting for 8 to 58 Watt Lamps

GAS GROUPS IIA AND IIB GAS GROUPS IIC

Wattage Lamp Length (mm) Weight (Kg) Product Code Wattage Lamp Length (mm) Weight (Kg) Product Code

1 x 8 Watts 300 3 550/0211 1 x 8 Watts 300 3 650/0211

1 x 18 Watts 600 6.5 550/0103 1 x 18 Watts 600 6.5 650/0103

2 x 18 Watts 600 6.7 550/0121 2 x 18 Watts 600 6.7 650/0121

1 x 36 Watts 1200 8.5 550/0109 1 x 36 Watts 1200 8.5 650/0109

2 x 36 Watts 1200 8.7 550/0127 2 x 36 Watts 1200 8.7 650/0127

1 x 58 Watts 1550 9.5 550/0115 1 x 58 Watts 1550 9.5 650/0115

2 x 58 Watts 1550 9.8 550/0133 2 x 58 Watts 1550 9.8 650/0133

ORDERING INFORMATION

Note: Append ‘P’ to the product code for a polycarbonate overtube e.g. 550/0133P. Add /WG to part number if a wire guard is required. Pepperl+Fuchs light fittings are not supplied with lamps. Other mounting options available.

Material All cast parts - light metal alloyOvertube - borosilicate glass / polycarbonateReflector - 1.2mm galvanized mild steel

Finish Cast metal parts - epoxy powder coated - RAL7032 Reflector – epoxy powder coat – white

Cover Fixing M6 allen head stainless steel screws

Gasket Nitrile O ring

Earthing Internal

Entries 1 x 20mm Ex d threaded entry c/w Ex d plug

Mounting 2 x Stainless Steel removable mounting brackets supplied as standard

ENCLOSURE SPECIFICATION

Control gear High frequency electronic ballast complying with all European standards relating to safety, operation and EMC (Immunity)

Operating voltage 220 – 254 Volts 50/60Hz

Operating current 0.5 Amps

Power factor 0.98

Emergency operation Maintained or non-maintained

Emergency operating time

3 hours

Ballast lumen factor (%) 8W - 27, 18W - 12, 36W - 10, 58W - 7

Recharge time 24 Hours from fully discharged.

Battery protection Protection against deep discharge and reverse battery polarity

Terminals 2.5mm² connection block suitable for through wiring

Lamps Bi-pin Fluorescent tube, T5 for 8W, T8 for all other fittings

EMC To EN55015:2000

ELECTRICAL SPECIFICATION

HAZARDOUS AREA SPECIFICATION

Marking to 94/9/EC II 2 GD

Type of Protection550 series

Ex de IIB T* GbEx tb IIIC T**°C Db

650 seriesEx de IIC T* GbEx tb IIIC T**°C Db

Ambient Temp.°C Gas Temperature Class (T*C)

Dust Temperature Class (T**)(°C)Min Max

-20 +40 T6 85

-20 +50 T5 100

Ingress Protection Glass overtube - IP67 to EN60529:1992poylcarbonate over tube - IP6X to EN60529:1992

Area Classification Zones 1,2,21,22

Certification No. SIRA00ATEX1107XGOST-R POCC GB.Mл14.B00223

1.2

D1

148

D3

D2

D4

120

149

Ø10.3B

A

All Dimensions in mm.

Calstar - Ex d Fluorescent Fitting for 8 to 58 Watt Lamps

Material All cast parts - light metal alloyOvertube - borosilicate glass / polycarbonateReflector - 1.2mm galvanized mild steel

Finish Cast metal parts - epoxy powder coated - RAL7032 Reflector – epoxy powder coat – white

Cover Fixing M6 allen head stainless steel screws

Gasket Nitrile O ring

Earthing Internal

Entries 1 x 20mm Ex d threaded hole at A and B. Both entries are fitted with Ex d stopping plugs

Mounting 2 x Stainless Steel removable mounting brackets supplied as standard

ENCLOSURE SPECIFICATION

Control gear High frequency electronic ballast complying with all European standards relating to safety, operation and EMC (Immunity)

Operating voltage 220 – 254 Volts 50/60Hz

Operating current 0.5 Amps

Power factor 0.98

Terminals 2.5mm² connection block suitable for through wiring

Lamps Bi-pin Fluorescent tube, T5 for 8W, T8 for all other fittings

EMC To EN55015:2000

ELECTRICAL SPECIFICATION

HAZARDOUS AREA SPECIFICATION

Marking to 94/9/EC II 2 GD

Type of Protection500 series

Ex d IIB T* GbEx tb IIIC T**°C Db

600 seriesEx d IIC T* GbEx tb IIIC T**°C Db

Ambient Temp.°C Gas Temperature Class (T*C)

Dust Temperature Class (T**)(°C)Min Max

-20 +40 T6 85

-20 +55 T5 100

-20 +60 T4 135

Ingress Protection Glass overtube - IP67 to EN60529:1992poylcarbonate over tube - IP6X to EN60529:1992

Area Classification Zones 1,2,21,22

Certification No. SIRA00ATEX1107XGOST-R POCC GB.Mл14.B00223

GAS GROUPS IIA AND IIB GAS GROUPS IIC

Wattage Lamp Length (mm) Weight (Kg) Product Code Wattage Lamp Length (mm) Weight (Kg) Product Code

1 x 8 Watts 300 2.5 500/0211 1 x 8 Watts 300 2.5 600/0211

1 x 18 Watts 600 5.0 500/0103 1 x 18 Watts 600 5.0 600/0103

2 x 18 Watts 600 5.2 500/0121 2 x 18 Watts 600 5.2 600/0121

1 x 36 Watts 1200 7.0 500/0109 1 x 36 Watts 1200 7.0 600/0109

2 x 36 Watts 1200 7.2 500/0127 2 x 36 Watts 1200 7.2 600/0127

1 x 58 Watts 1500 8.0 500/0115 1 x 58 Watts 1500 8.0 600/0115

2 x 58 Watts 1500 8.3 500/0133 2 x 58 Watts 1500 8.3 600/0133

ORDERING INFORMATION

Note: Append ‘P’ to the product code for a polycarbonate over tube e.g. 500/0133PAdd /WG to part number if a wire guard is required Pepperl+Fuchs light fittings are not supplied with lampsOther mounting options available

Model D1 D2 D3 D4

8 Watts 653mm 330mm 649mm 390mm

18 Watts 915mm 592mm 911mm 652mm

36 Watts 1514mm 1191mm 1510mm 1251mm

58 Watts 1820mm 1497mm 1816mm 1557mm

Catalog_eng.indb 152 19.03.2010 10:16:16