Fluke 435 Logging Power Quality Analyzer The World’s Leading 3-Phase Power Quality Troubleshooter Expands its Capabilities

The Class A Fluke 435 with enhanced logging and reporting

Page 1 of 5

The Fluke 434 and 435 three-phase power quality analyzers help you locate, predict, prevent and troubleshoot problems in three and single phase power distribution systems. Troubleshooting is faster with on-screen display of trends and captured events, even while background recording continues. The new IEC standards for flicker, harmonics and power quality are built right in to take the guess work out of power quality.

• Troubleshoot real-time: Analyze the trends using the cursors and zoom tools – even while background recording continues

• Highest safety rating in the industry – 600V Cat IV / 1000V CAT III • Automatic transient mode captures 200kHz waveform data on all phases simultaneously

– up to 6kV • Measure all three phases and neutral with included 4 current probes • AutoTrend: every measurement you see is always automatically recorded, without any

setup • System-Monitor: Up to seven power quality parameters on one screen according to

EN50160 • Inrush mode for troubleshooting nuisance circuit breaker tripping • Rugged, handheld troubleshooter with Fluke 3 year warranty • Seven hours operating time per charge on NiMH battery pack • View graphs and generate reports with included analysis software

Fluke 435 Only Features

• Fully Class A Compliant - conduct tests according to the stringent international IEC 61000-4-30 Class A standard

• Logger function - Configure for any test condition with memory for over 400 parameters at user defined intervals

Key Features: Fluke 435 Only Features • Fully Class A Compliant – with 0.1% voltage accuracy, test according to the stringent

international IEC 61000-4-30 Class A standard • Logger function - Configure for any test condition with memory up to 400 parameters at

user defined intervals • New Fluke Power Log software – Easily view logged data and generate reports • Flexible current probes included – these new 3000A CAT IV flexis are instrument

powered (no more batteries) • Rugged roller carry case protects the 435 during shipping and transportation • Double the memory for expanded logging time

Fluke 434 and 435 Enhancements • Expanded voltage configurations with 2 and 2.5 element modes • Supports GPS time synchronization according to IEC61000-4-30 via optional GPS430

module • Phase angle resolution improved to 0.1º resolution and referenced to L1/A voltage • Phase rotation indicator provides clear indication of the phase rotation direction to

determine correct connections.

Page 2 of 5

• Hz resolution improved to 0.001Hz • Rapid voltage change measurement now also shows the absolute voltage change to

characterize the effects of load switching. Key Benefits

• CAT IV flexible current probes with no battery required • Long-term logging capability • Easy-to-use reporting and analysis software • Fully Class-A compliant • Flexibility to record up to 400 parameters simultaneously • GPS time synchronization

Product Selection Guide:

Fluke 434* Fluke 435 Measures voltage, current, dips, swells, interruptions, harmonics, inter-harmonics, flicker, power, energy, transients, frequency, unbalance, inrush, EN50160 overview

● ●

Logger function with multi-parameter logging, mains signaling * optional ●

Mains Signaling * optional ●Fully Class A Compliant ●

Voltage Accuracy 0.5% of nominal Class A - 0.1% of nominal

Memory 8Mb 16Mb

Current Probes 40A/400A clamp (4) 3000A flexible (4)

GPS Time Synchronization ** Optional- ** optional

Carrying Case rugged hard case water-tight hard case with rollers

Software FlukeView FlukeView and Report generation and logger analysis software Power Log * optional ●

* Optional functionality can be added with upgrade kit. ** Requires optional Accessory

Page 3 of 5

Page 4 of 5

Applications:

• Frontline Troubleshooting

quickly diagnose problems on-screen to get your operation back online

• Predictive Maintenance detect and prevent power quality issues before they cause downtime

• Quality of Service Compliance validate incoming power quality at the service entrance

• Long-term Analysis uncover hard-to-find or intermittent issues

• Load Studies verify electrical system capacity before adding loads

• Energy Assessments quantify energy consumption before and after improvements to justify energy saving devices

Included Accessories & Warranty:

FLUKE 434 FLUKE 435

Hard carrying case 4 current probes (i400s) 5 Test leads and clips Battery charger Optical USB cable Color localization set Printed getting started manual User manual CD FlukeView software

Hard carrying case with rollers 4 Flex current probes (i430-flex) 5 Test leads and clips Battery charger Optical USB cable Color localization set Printed getting started manual User manual CD FlukeView software

Power Log software

Existing Fluke-434 Customer Upgrades: Customers can choose two options:

1. Free 434 firmware update: enable compatibility with the new battery free i430s flexible CT and other enhancements - http://us.fluke.com/usen/support/software/

2. Upgrade to 435 feature set: install logger functionality, Fluke Power Log software, mains signaling and more – order FLUKE434/LOG (see Optional Accessories below)

Page 5 of 5

Optional Accessories:

• 40A/ 400A switch able current clamp (included w/434) Model : I400s • 4 pack of 3000A flexible current probes (included w/ 435) Model: i430-flexipack • Water-tight hard case with rollers (included w/435) Model : C435 • 3 pack of 5A precision current clamps Model : I5sPQ3 • GPS time synchronization module for Fluke 430 series Model: GPS430 • Upgrade kit for 434 to add Includes Power Log software and enables logger and mains

signaling function (accuracy and memory not upgradeable) Model : Fluke 434/LOG