B E N E F I T S A N D C U S T O M E R V A L U E

Benefits • 3o angle on each coupling

• Quicker to assemble than alternative fittings

Customer value • Cost efficient curving of the pipeline• Minimized construction & design work

Areas of use • Commonly used for water, irrigation, pressure sewer, penstocks and many other applications.

Other couplings from Flowtite

• Pressure Coupling• Biaxial Lockjoint• Sewer Coupling

T E C H N I C A L D ATA

Operating pressure Up to 16 bar

Main Materials Glassfibre Reinforced Plastic (GRP)

Estimated lifetime More than 150 years

Operating temperature -50 oC - +50 oC

Gasket design Reka

Gasket material EPDM

Estimated gasket lifetime 150 years

Diameter range (DN) Up to 4000 mm

Assesment of conformity CEN TS 14632

International Pipe Standards ASTM D3262, ASTM D3754, ASTM D3517 AWWA C950ISO 10639, ISO 10467EN 1796, EN 14634

FLOWTITEANGLED COUPLINGCOUPLING FOR INCREASED ANGULAR DEFLECTIONS UP TO 3ο, WITHOUT THE USE OF THRUSTBLOCKS.

The Angled Coupling is designed for pressure mains up to 16 bar. It is based on the design of the trusted Flowtite Pressure Coupling, a design that have been used on all five continents of the world for more than 40 years. The expected lifetime of Flowtite Angled Couplings is more than 150 years.

www.flowtite.com

F L O W T I T E A N G L E D C O U P L I N G

2 0 1 5 - 0 8 - 1 9 R e v 3

Reduces amount of bends and thrustblocks•

Reduced cost on fittings and bends• Fits the following pipes Pressure pipe and sewer pipe

Note! DN 1300 upwards requires adjustment of the pipe spigots.

Minimum radius of curvature 57 m at 3 m pipe lengths

Radius of Curvature at Standard Pipe Lengths

Pipe Length

Radius of curvature

3 m 6 m 12 m

57 m 115 m 229 m