Upload
others
View
0
Download
0
Embed Size (px)
Citation preview
Flow Wallby
patent pending [email protected] turf.design 844 TURF [email protected] turf.design 844 TURF OMG
Flow
VERSATILE & FLEXIBLEThe Flow Wall is the industry's best wall partition system with original patterns, standardized sizes, and an NRC Rating of .85. Easy to order, inexpensive to ship, and quick to install, Flow wall will have you enjoying acoustic perfection and aesthetic genius by the time you finish reading this cut sheet.
[email protected] turf.design 844 TURF OMG patent pending
What's in the Box:
HANGER x10
MOUNTING BRACKETS **
CHANNEL TRACK MENDING PLATE ***
5 CHANNEL SLIDING TRACK *
5 FLOW WALL PANELSW/ EMBEDDED HANGER TRACK
TRACK END CAPS(LEFT AND RIGHT)
* ** ***
LENGTH VARIES AND IS SPECIFIED IN ORDERMOUNTING BRACKETS ARE SUPPLIED IN QUANTITIES OF 1 PER 2 LINEAR FT OF CHANNEL TRACKINCLUDED ONLY IF CHANNEL TRACK EXCEEDS 8’
SIZE PER SPECIFICATION
94.8
5"
FULL SYSTEM HEIGHT IS .85” TALLERTHAN SPECIFIED PANELS
STRUCTURAL HEADER REQUIREDTO MOUNT FLOW WALL TRACK
COLOR AND PATTERN WILL REFLECTPRODUCT SPECIFICATION
94”
23”
STANDARD PANEL DIMENSIONS
3.58"
When it's done:
HANGER x10
MOUNTING BRACKETS **
CHANNEL TRACK MENDING PLATE ***
5 CHANNEL SLIDING TRACK *
5 FLOW WALL PANELSW/ EMBEDDED HANGER TRACK
TRACK END CAPS(LEFT AND RIGHT)
* ** ***
LENGTH VARIES AND IS SPECIFIED IN ORDERMOUNTING BRACKETS ARE SUPPLIED IN QUANTITIES OF 1 PER 2 LINEAR FT OF CHANNEL TRACKINCLUDED ONLY IF CHANNEL TRACK EXCEEDS 8’
SIZE PER SPECIFICATION
94.8
5"
FULL SYSTEM HEIGHT IS .85” TALLERTHAN SPECIFIED PANELS
STRUCTURAL HEADER REQUIREDTO MOUNT FLOW WALL TRACK
COLOR AND PATTERN WILL REFLECTPRODUCT SPECIFICATION
94”
23”
STANDARD PANEL DIMENSIONS
3.58"
[email protected] turf.design 844 TURF OMG patent pending
Assembly
MOUNT THE BRACKETSMount the brackets in l ine along the header (recommend using a laser). Hardware to mount the bracket is to be specif ied by instal ler.
If mending plates are required, check location of mounting hardware relative to splicing locations.
UNLOCKED POSITION
ROTATE IN TRACKTO LOCK
LOCKED POSITION
NOTE THAT BRACKET ISFLUSH WITH FRONT EDGE OF TRACKWHEN LOCKED
MOUNTING SCREW / BOLT TO BE SIZED AND SUPPLIED BY INSTALLER BASED ONFIELD CONDITIONS
MOUNTING BRACKETASSEMBLY
HEADER
APPROX 2’ APART PLUS A BRACKET ON EITHER END TO SUPPORT OUTSIDE EDGE
5 CHANNEL TRACK
TYPICAL ASSEMBLY SHOWN (2 PER PANEL)IF PANELS ARE NON-STANDARD THEN
MORE HANGERS WILL BE REQUIRED ANDSUPPLIED
NOTE ORIENTATION OF HANGERS IN TRACK
HANGERS
1
2
3
SLIDE HANGERS ON TRACKHangers need to be sl id onto the track prior to track instal lation. If panels exceed stanard width additional hangers wil l be supplied.
MENDING PLATEI f the required track exceeds 8' , mending plates wil l be supplied. Insert mending plates between track sections.
[email protected] turf.design 844 TURF OMG patent pending
UNLOCKED POSITION
ROTATE IN TRACKTO LOCK
LOCKED POSITION
NOTE THAT BRACKET ISFLUSH WITH FRONT EDGE OF TRACKWHEN LOCKED
MOUNTING SCREW / BOLT TO BE SIZED AND SUPPLIED BY INSTALLER BASED ONFIELD CONDITIONS
MOUNTING BRACKETASSEMBLY
HEADER
APPROX 2’ APART PLUS A BRACKET ON EITHER END TO SUPPORT OUTSIDE EDGE
4 MOUNTING THE TRACKMount the track by rotating the mounting brackets into position to lock the track.
23"
11" 6"6"
COMPRESS FELT AND SLIDE TRACK HANGER INTO POSITION
CLIPS CAN ALSO BE ROTATED AND LOCKED INTO PLACEBY REGISTERING THE BOTTOM EDGE AND PUSHING INTO PLACE
5 HANG THE PANELSSlide or cl ip the hangers along the hanger track.
Assembly (Continued)
6 ADD END CAPSA left and right side end cap are provided with the product. Use a hand screwdriver to tighten.
[email protected] turf.design 844 TURF OMG patent pending
How to Specify1 SET TRACK LENGTH
What's the opening size you want to cover? Note that multple panels can be placed on the same track section.
2 PICK COLOR Select colors from the 9mm or 3mm color guides. No mixing material thicknesses please.
3 PICK YOUR PATTERNSelect the pattern or specif ic panels from the cutsheet.
* IS THIS CUSTOM?What's shown is the standard assembly. If there are custom needs, we do thattoo, there is just a bit longer lead time.
Are the panels that you need different from our standard size? Do you need adifferent number of tracks (5 is the max per system)?
No problem, this does shift our lead time from 4 weeks to 6 weeks though andwil l require a custom quote and approval drawings.
4 MARK UP THE CUTSHEETAll you need to do is f i l l in the above blanks or mark up the Cutsheet with your selections and send it in to your local rep or directly to Turf with a signed quote.*
Flow Wallby
Pattern F6
F6A F6B F6C F6D F6E9
4"
23"
[email protected] turf.design 844 TURF OMG
9MM Felt Colors
COLOR DISCLAIMERPanels exceeding 95" x 47.5" only come in 5 White, 4 Light Grey, 38 Matte Grey, 6 Charcoal, 7 Black, 48 Light Brown, 47 Lime and 42 Orange.
01 CREAM 04 LIGHT GREY 05 WHITE 06 CHARCOAL 07 BLACK
14 GREEN
16 RED 20 MANGO 25 LIGHT BLUE 29 DARK BLUE 32 BROWN
38 MATTE GREY
39 LAVENDER 42 ORANGE 45 YELLOW 47 LIME 48 LIGHT BROWN
patent pending [email protected] turf.design 844 TURF OMG
Pattern F1
1FRONT ELEVATIONPattern F1 includes [5] 23" x 94" panels.
94
"
23"
Pattern shown will be modified to fit the size of the panels ordered. Pattern will fill pattern area.
[email protected] turf.design 844 TURF OMG patent pending
Pattern F2
2FRONT ELEVATIONPattern F2 includes [5] 23" x 94" panels.
23"
94
"
Pattern shown will be modified to fit the size of the panels ordered. Pattern will fill pattern area.
[email protected] turf.design 844 TURF OMG patent pending
Pattern F3
3FRONT ELEVATIONPattern F3 includes [5] 23" x 94" panels.
94
"
23"
Pattern shown will be modified to fit the size of the panels ordered. Pattern will fill pattern area.
[email protected] turf.design 844 TURF OMG patent pending
Pattern F4
4FRONT ELEVATIONPattern F4 includes [5] 23" x 94" panels.
94
"
23"
Pattern shown will be modified to fit the size of the panels ordered. Pattern will fill pattern area.
[email protected] turf.design 844 TURF OMG patent pending
Pattern F5
5FRONT ELEVATIONPattern F5 includes [5] 23" x 94" panels.
23"
94
"
Pattern shown will be modified to fit the size of the panels ordered. Pattern will fill pattern area.
[email protected] turf.design 844 TURF OMG patent pending
Pattern F6
F6A F6B F6C F6D F6E
6FRONT ELEVATIONPattern F6 includes [5] 23" x 94" panels. Choose any combination of the 5 versions of this pattern.
94
"
23"
Pattern shown will be modified to fit the size of the panels ordered. Pattern will fill pattern area.
[email protected] turf.design 844 TURF OMG patent pending
Pattern F7
7FRONT ELEVATIONPattern F7 includes [5] 23" x 94" panels. Choose any combination of the 5 versions of this pattern.
94
"
23"
F7A F7B F7C F7D F7E
Pattern shown will be modified to fit the size of the panels ordered. Pattern will fill pattern area.
[email protected] turf.design 844 TURF OMG
PRODUCT NAME
CONTENT Up to 60% Pre-Consumer Recycled Content Polyester Felt
FELT THICKNESS 9mm OR 3mm
PANEL THICKNESS
INDIVIDUAL PANEL SIZE
Varies
23” x 94” x 9mm
OPENING SIZE 95” X Varies X 3 1/2”
EDGE OPTIONS Exposed Felt
COMPONENTS Aluminum Roll Track 5 Panel System (supplied by TURF)
DURABILITY Contract
MAINTENANCE
Vacuum occasionally to remove any particulate matter and
air-borne debris or dust. Compressed air can be used to dust
the material in di�cult to reach areas for large assemblies.
LEAD TIME Shipped in 4 weeks (6 weeks if custom).
ENVIRONMENTAL
9mm PET felt board is made from up to 60% pre-consumer recycled polyester
plastic. TURF has a Declare Label for this product. TURF is pursuing product
transparency for LEED V4 MR Credit 4 Option 1, and MR Credit 3 Option 2 for
recycled content.
VARIATION
PET Felt uses a traditional ‘felting’ process to create its panels.
This often results in a pleasing heathered e�ect, where multiple tones are present
in the fiber. Slight and consistent variations in color should be expected when
using this sustainable material.
ACOUSTICS ASTM C423-17: NRC = 0.75 (Material)
VOC ASTM D 5116 Compliant
FIRE RATING Product made from Class A PET felt material tested under AS TM E-84.
Flow Wall
[email protected] turf.design 844 TURF OMG PATENT PEND ING
07 BLACK
01 CREAM
78 WHEAT
70 AQUA
20 MANGO
94 CORAL
06 CHARCOAL
50 IVORY
82 BARLEY
90 SKY
62 SUNFLOWER
42 ORANGE
38 MATTE GREY
05 WHITE
54 LATTE
25 LIGHT BLUE
45 YELLOW
16 RED
86 SLATE
66 PEWTER
48 LIGHT BROWN
74 DENIM
47 LIME
58 RASPBERRY
98 STORM
04 LIGHT GREY
32 BROWN
29 DARK BLUE
14 GREEN
39 LAVENDER
9MM FELTTURF’s Flow carved wall tile is made with 9mm PET felt board.
The process used to create PET felt often results in a heathered effect where multiple tones are present. Slight variations in color should be expected when using this sustain-able material.
Felt thickness is 9mm +/- 0.5 mm.
Monitors and printers vary. Please request a material sample to verify felt colors.
[email protected] turf.design 844 TURF OMG patent pending
3MM FELTIn addition to the 9mm boards we can also integrate 3mm PET fabric into the products through lamination. The layered material enhances not only the acoustic performance, but allows for color combinations and color reveals.
Monitors and printers vary. Please request a material sample to verify felt colors.
R03 LIGHT GREY
R07 MARIGOLDR09 BISQUE
R28 MIDNIGHT
R19 BLUE
R11 BLACK
R22 TEAL
R01 WHITE
R02 DARK GREY
R13 PARCHMENT
R25 FLINT
R20 TAN
[email protected] turf.design 844 TURF OMG patent pending
patent pending [email protected] turf.design 844 TURF OMG
TEST ARRANGEMENTType J Mounting: The specimen is an array of spaced sound absorbing baffles suspended from a cable approximately 1206.5mm (47.5 in.) above the horizontal test surface. This approximates the mounting method of a typical ceiling baffle installation. The baffles were evenly distributed in four rows four units each. Baffles were spaced 305 mm (12 in.) apart. Rows were spaced 762mm (30 in.) apart.
Acoustic Testing (ASTM C 423-17)
FREQUENCY (Hz)S
OU
ND
AB
SO
RP
TIO
N C
OE
FF
ICIE
NT
125 250 500 1,000 2,000 4,000
0
0.1
0.2
0.4
0.5
0.6
0.7
0.8
0.9
1
1.1
NRC=0.85
SAA=0.76
FREQUENCY (Hz)SOUND
ABSORPTIONCOEFFICIENT
32 .03
40 .-01
50 -.02
63 -.07
80 .06
100 .09
125 .12
160 .20
200 .24
250 .33
315 .45
400 .59
500 .76
630 .85
800 .89
1,000 1.00
1,250 1.06
1,600 1.06
2,000 .99
2,500 .89
3,150 .83
4,000 .94
5,000 1.04
6,300 1.00
8,000 1.05
10,000 1.07
12,500 1.07