FLOW LIMITER VALVEsprayers.com/2020Catalog/ace-hydraulic-pump.pdf · PUMPS ACE PUMPS HYDRAULIC DRIVEN CENTRIFUGAL PUMPS. GEMINI DUAL PUMP KIT. PART NUMBER. DPK DPK-EXT. DESCRIPTION

PUMPSA

CE

PU

MP

S

HYDRAULIC DRIVEN CENTRIFUGAL PUMPSGEMINI DUAL PUMP KIT

PART NUMBERDPK

DPK-EXT

DESCRIPTIONGemini dual pump kit allows two 204 and/or 206 hydraulic motor driven pumps to be controlled from a single remote

22’ Extension cable (optional)

LIST PRICE$2,374.10

$125.43

Gemini Dual Pump Kit

Features:• Operate two pumps independently• Supply oil from one tractor remote or power beyond circuit• Use on tractors with Load Sensing (LS) or Pressure Compensated (PC) hydraulic systems• Two modes of operation: • Manual mode - independent on/off operation from the cab with independent manual flow adjustment at the hydraulic manifold • PWM mode - independent pump regulation with PWM signal from controller (not included)• Operates any combination of Ace Pumps equipped with the 204 or 206 motorIncludes:

• Switch Box Assembly (15’)• Implement Wire Harness (12’)• Valve Manifold• Hydraulic return tee & adapter for Load Sense (LS) port

FLOW LIMITER VALVEFOR USE ON LOAD SENSING OR PRESSURE-FLOW COMPENSATING CLOSED CENTER SYSTEM

PART NUMBERLS-204LS-204NLS-206LS-206NLS-210LS-210NLS-304LS-304N

FOR HYDRAULIC MOTORBAC-75-HYD-204

BAC-75-HYD-204N / BAC-75-HYD-204RBAC-75-HYD-206

BAC-75-HYD-206N / BAC-75-HYD-206RBAC-75-HYD-210

BAC-75-HYD-210NBAC-75-HYD-304

BAC-75-HYD-304N

LIST PRICE$97.56$110.23$97.56 $110.23 $97.56 $110.23 $110.23 $110.23

Flow Limiter Valve

Features:• Installs in Ace hydraulic motor inlet port• Protects motor from overspeeding• Shuts off all hydraulic flow when the motor’s capacity is exceeded• Automatically resets when hydraulic pressure is released• Available for all Ace Pump models recommended for use on Load Sensing Hydraulic Systems

The flow limiter is a hydraulic device designed to shut off the flow of hydraulic oil when a specified flow is exceeded. On tractors with LOAD SENSING (LS) Closed Center hydraulic systems, this device limits the flow of oil to the Ace motor and prevents failures due to misapplication.Newer tractors with Load Sensing Systems present a great potential to turn the motors beyond their rated speeds. Flows out of the hydraulic valves can exceed 30 GPM while the motors are rated at 4-11 GPM. The flow limiter protects the Ace motor by shutting off when hydraulic flows exceed the motors capacity.The flow limiter should not be used on OPEN Center or PRESSURE COMPENSATING Closed Center hydraulic systems. The flow limiter should not be used with a restrictor orifice.

Polypropylene25 GPM100 PSI

Cast Iron85 GPM100 PSI

Cast Iron135 GPM120 PSI

Cast Iron or Stainless145 GPM120 PSI

MaterialMax FlowMax Pressure

Pump ModelsChoose any two depending on

application requirements

FMC-75-HYD-204FMC-75-HYD-206

FMC-HYD-204FMC-HYD-206

FMC-150-HYD-206 FMC-150F-HYD-206FMC-150FS-HYD-206

Operates any combination of

Ace Pumps equipped with the 204 or 206 motor

MAKE SURE TO REMOVE MOTOR ADAPTER BEFORE INSTALLING

LIST PRICE CATALOG

PLEAS E A P P LY D I S C OUNT

SPRAYER

SPECIALTIES

Grimes, IA 800-351-1587 • Gardner, KS 877-829-8502 • Brimfield, IL 855-778-8500

202

202

PUMPS AC

E PU

MP

S

HYDRAULIC DRIVEN CENTRIFUGAL PUMPSFMC-75-HYDFeatures:

• Polypropylene Corrosion Resistant Construction• Stainless Steel Shaft and Hardware• Port Sizes: 1” NPT inlet, 3/4” NPT Outlet • Weight: 17 lbs.• Max. fluid temperature: 140˚F / 60˚ C• Integral needle valve bypasses up to 9 GPM on Open Center Systems - 204 motor requires 4 GPM hydraulic flow on PC Closed and Open Center Systems - 206 motor requires 7 GPM hydraulic flow on LS Closed and Open Center Systems• Pump seals: Standard Viton® / ceramic standard or Optional Severe Duty Silicon Carbide • Do Not Run Dry - Seal damage will result from running dry. Impeller damage may also occur if run dry for an extended period.• Do Not Run With Flow Shutoff For Extended Periods - Running the pump with no flow for extended periods of time will result in excessive heat and pump failure. A continuous bypass is recommended for low flow applications.

PART NUMBERFMC-75-HYD-204FMCSC-75-HYD-204FMC-75-HYD-206FMCSC-75-HYD-206FMC-75-HYD-LM

MAXGPM

25252727

MAXPSI100100100100

MAX HYDGPM

4477

PORT SIZES1” FPT Inlet x 3/4” FPT Outlet1” FPT Inlet x 3/4” FPT Outlet1” FPT Inlet x 3/4” FPT Outlet1” FPT Inlet x 3/4” FPT Outlet

PUMP SEALSViton® / Ceramic

Severe Duty Silicon CarbideViton® / Ceramic

Sever Duty Silicon Carbide

LIST PRICE$1,145.55$1,250.69$1,145.55 $1,250.69$841.17

Polypropylene Hydraulically-Driven Pumps

Polypropylene Centrifugal Pump Less Motor

PART NUMBERRK-GE-75RK-GESC-75RK-BAC-75-HYD-L

DESCRIPTIONRepair kit for FMC-75-HYD series

Repair kit for FMC-75-HYD series with silicon carbide shaft sealRepair kit for 200 series hydraulic motor

LIST PRICE$89.01

$232.17$81.28

Repair Kits

REF#12345

6•*789•9*

9A•*10•*1112131415161718192021222223232425262728282929•*

PART#BAC-53-P

8025042701

GE-12-754224030028

GE-26-7542238

BAC-7-75VBAC-7SC-75V

4015940017

GE-14-75BAC-45

BAC-14-75-HYDBAC-54BAC-33BAC-37BAC-32

BAC-32-S41082

BAC-6-75-HYD-SSS200

BAC-75-HYD-204RBAC-75-HYD-206R

412534125541875

BAC-78-8SAEBAC-80-8SAE

41448BAC-79-5BAC-79-7LS-204NLS-206N

RK-GE-75RK-GESC-75

RK-BAC-75-HYD-L

DESCRIPTIONPipe plug, 1/8” NPT, plastic

Cap screw, 3/8”-16 x 7/8”, hex headWasher, 3/8” flat

Volute, 3/4” x 1”, polypropyleneCap screw, 1/4”-28 x 1”, hex, stainless steel

Washer, sealingImpeller, with keyway, polypropylene

Cap screw, 5/16”NF x 2-1/4”Seal, 5/8”, Viton®/carbon/ceramic

Seal, 5/8”, Viton®/silicon carbide (optional)O Ring, seal seat

O Ring, volute seatBracket, polypropylene

Nut, hex, 3/8”Mounting frame (for BAC-75-HYD-204R/206R)

SlingerSnap ring, internal, BAC-14 mounting frame

Bearing, BAC-6 driven shaftSnap ring, external, BAC-6 driven shaft

Spacer for BAC-6 shaftKey, 3/16” x 3/16” x 15/16”

Shaft, 5/8” driven shaft with tank slot, Stainless SteelSeal support spacer for 200 series hydraulic lip seal

Hydraulic motor, 4 GPMHydraulic motor, 7 GPM

Cap screw, 5/16”NC x 3 1/2” socket head (204 motor)Cap screw, 5/16”NC x 3 3/4” socket head (206 motor)

O ring, #8 SAE fittingReverse check assembly, #8 SAE male x 1/2” FPT

Body, restrictor orifice, #8 SAE male x 1/2” FPTO ring, orifice insert

Orifice, restrictor insert, .078 (204)Orifice, restrictor insert, .109 (206)

Flow limiting valve (204), #8 SAE male x 1/2” FPTFlow limiting valve (206), #8 SAE male x 1/2” FPT

Repair kit for FMC-75-HYD seriesRepair kit for FMC-75-HYD with silicon carbide seal

Repair kit for 200 series motor

LIST PRICE$1.33$2.60$.70

$162.17 $3.86 $2.60 $76.02 $3.55

$62.08 $200.18

$1.27 $17.74 $168.51

$.63 $329.41

$1.96 $2.60 $25.34

$.70 $7.73 $1.33

$154.57 $12.67 $851.41 $832.40

$2.60 $2.60 $1.27 $36.24 $28.51 $1.27 $14.32 $14.32 $110.23 $110.23 $89.01 $232.17 $81.28

PARTS BREAKDOWN FMC-75-HYD

QTY18811514111118112221111114421111111---

LIST PRICE CATALOG


SPRAYER

SPECIALTIES

FMC-75SP-HYD-204FMC-75SP-HYD-206FMC-75SP-HYD-LM

2527

100100

47

1” FPT Inlet x 3/4” FPT Outlet1” FPT Inlet x 3/4” FPT Outlet

Viton® / CeramicViton® / Ceramic

$1,200.89$1,200.89$896.51

Self-Priming Polypropylene Hydraulically-Driven Pumps

Self-Priming Polypropylene Centrifugal Pump Less Motor


203

203

HYDRAULIC DRIVEN CENTRIFUGAL PUMPSFMC-HYDFeatures:

• Cast Iron Construction• Stainless Steel Shaft and Wear Ring• Port Sizes: 1-1/4” NPT inlet, 1” NPT Outlet• Integral needle valve bypasses up to 9 GPM on Open Center Systems - 202 motor requires 2GPM hydraulic flow on LS Closed and Open Center Systems - 203 motor requires 3GPM hydraulic flow on LS Closed and Open Center Systems - 204 motor requires 4GPM hydraulic flow on LS Closed and Open Center Systems - 210 motor requires 10GPM hydraulic flow on LS Closed and Open Center Systems - 310 motor requires 16GPM hydraulic flow on LS Closed and Open Center Systems• Pump seals: Standard Viton® / ceramic standard or Optional Severe Duty Silicon Carbide• Chemical Resistant Valox® or Optional Cast Iron Impeller

PART NUMBERFMC-HYD-202FMC-HYD-202-CIFMC-HYD-202-SSFMCSC-HYD-202FMCSC-HYD-202-CIFMC-HYD-203FMC-HYD-203-CIFMC-HYD-203-SSFMCSC-HYD-203FMCSC-HYD-203-CIFMC-HYD-204FMC-HYD-204-CIFMC-HYD-204-SSFMC-HYD-204-SS-CIFMCSC-HYD-204FMCSC-HYD-204-CIFMCSC-HYD-204-SSFMC-HYD-206FMC-HYD-206-CIFMC-HYD-206-SSFMCSC-HYD-206FMCSC-HYD-206-CIFMC-HYD-210FMC-HYD-210-CIFMC-HYD-210-SSFMC-HYD-210-SS-CIFMCSC-HYD-210FMCSC-HYD-210-CIFMC-HYD-310FMC-HYD-310-CIFMC-HYD-310-SSFMCSC-HYD-310FMCSC-HYD-310-CI

MAXGPM

7070707070808080808085858585858585

100100100100100100100100100100100100100100100100

MAXPSI100100100100100100100100100100100100100100100100100120120120120120120120120120120120120120120120120

MAX HYDGPM

2222233333444444477777

1010101010102525252525

PORT SIZES1-1/4” FPT Inlet x 1” FPT Outlet1-1/4” FPT Inlet x 1” FPT Outlet1-1/4” FPT Inlet x 1” FPT Outlet1-1/4” FPT Inlet x 1” FPT Outlet1-1/4” FPT Inlet x 1” FPT Outlet1-1/4” FPT Inlet x 1” FPT Outlet1-1/4” FPT Inlet x 1” FPT Outlet1-1/4” FPT Inlet x 1” FPT Outlet1-1/4” FPT Inlet x 1” FPT Outlet1-1/4” FPT Inlet x 1” FPT Outlet1-1/4” FPT Inlet x 1” FPT Outlet1-1/4” FPT Inlet x 1” FPT Outlet1-1/4” FPT Inlet x 1” FPT Outlet1-1/4” FPT Inlet x 1” FPT Outlet1-1/4” FPT Inlet x 1” FPT Outlet1-1/4” FPT Inlet x 1” FPT Outlet1-1/4” FPT Inlet x 1” FPT Outlet1-1/4” FPT Inlet x 1” FPT Outlet1-1/4” FPT Inlet x 1” FPT Outlet1-1/4” FPT Inlet x 1” FPT Outlet1-1/4” FPT Inlet x 1” FPT Outlet1-1/4” FPT Inlet x 1” FPT Outlet1-1/4” FPT Inlet x 1” FPT Outlet1-1/4” FPT Inlet x 1” FPT Outlet1-1/4” FPT Inlet x 1” FPT Outlet1-1/4” FPT Inlet x 1” FPT Outlet1-1/4” FPT Inlet x 1” FPT Outlet1-1/4” FPT Inlet x 1” FPT Outlet1-1/4” FPT Inlet x 1” FPT Outlet1-1/4” FPT Inlet x 1” FPT Outlet1-1/4” FPT Inlet x 1” FPT Outlet1-1/4” FPT Inlet x 1” FPT Outlet1-1/4” FPT Inlet x 1” FPT Outlet

PUMP SEALSViton® / CeramicViton® / CeramicViton® / Ceramic

Sever Duty Silicon CarbideSever Duty Silicon Carbide

Viton® / CeramicViton® / CeramicViton® / Ceramic


Viton® / CeramicViton® / CeramicViton® / CeramicViton® / Ceramic

Sever Duty Silicon CarbideSever Duty Silicon CarbideSever Duty Silicon Carbide



Viton® / CeramicViton® / CeramicViton® / CeramicViton® / Ceramic




LIST PRICE$1,405.65$1,496.40$1,427.78 $1,510.79 $1,601.55 $1,405.65 $1,496.40 $1,427.78 $1,510.79 $1,601.55 $1,389.04 $1,479.80 $1,446.60 $1,501.94 $1,494.19 $1,584.95 $1,516.33 $1,389.04 $1,479.80 $1,411.18 $1,494.19 $1,584.95 $1,389.04 $1,479.80 $1,411.18 $1,501.94 $1,494.19 $1,584.95 $1,416.71 $1,507.47 $1,438.85 $1,521.86 $1,612.62

Cast Iron Hydraulically-Driven Pumps

PART NUMBERFMC-HYD-LMFMC-HYD-310-LMRK-FMCRK-FMCSCRK-BAC-75-HYD-LRK-BAC-75-HYD-300-L

DESCRIPTIONPump less motor for FMC-HYD-2XX modelsPump less motor for FMC-HYD-310 model

Repair kit for FMC series pumpRepair kit for FMC-75-HYD series with silicon carbide shaft seal

Repair kit for 200 series hydraulic motor with high pressure lip sealRepair kit for 310 hydraulic motor with high pressure lip seal

LIST PRICE$1,084.67$1,106.81

$76.91 $231.48 $81.28

$128.22

Pump Head & Repair Kits

OPTION DISCRIPTIONFMCSC Silicon carbide shaft seal for abrasives-CI Cast iron impeller-SS Stainless steel fitted package including impeller nut, capscrews, and pipe plugs

PUMPS PUMPSA

CE

PU

MP

S

LIST PRICE CATALOG


SPRAYER

SPECIALTIES


204

204

PUMPS AC

E PU

MP

SREF#

11234556*6

6A7*7*899

10111213141516161718191920*##

PART#BAC-5341120

BAC-12BAC-23-A

BAC-24-HYD-SSBAC-26-HYD-VALOX

BAC-26-HYD-CIBAC-7V

BAC-7SC40160BAC-4

BAC-4ABAC-14-HYD

4095040930

BAC-54BAC-33BAC-37BAC-32

BAC-32-SBACH-25

BAC-6-HYDBAC-6-HYD-SS

S200BAC-76-HYD

BAC-75-HYD-202BAC-75-HYD-203

41250RK-FMC

RK-BAC-75-HYDRK-BAC-75-HYD-L

DESCRIPTIONPipe plug

Pipe plug, stainless steel (optional)Volute, 1 1/4” x 1”

Nut, 3/8” NF, cad platedWasher, 3/8” star, stainless steel

Impeller, Valox, keywayImpeller, cast iron, keyway (optional)

Seal, mechanical, Viton® (includes 40160)Seal, mechanical, silicon carbide (includes 40160) opt.

O ring, shaft sealGasket, 4 hole, (obsolete 1996)

O ring, body sealMounting frame (for -200 Series hydraulic motors)

Cap screw, 3/8” NC x 3/4” hex headCap screw, 3/8” NC x 3/4” hex head, stainless steel, opt.

SlingerSnap ring, internal, BAC-14 mounting frame

Ball bearing, sealed, BAC-6 shaftSnap ring, external, BAC-6 shaft


Shaft, 5/8” diameter, keyway and tang slot (optional)Shaft, 5/8”diameter, keyway and tang slot, stainless steel

Seal support spacer, 200 Series motor lip sealCoupling for hydraulic motor

Hydraulic motor, 2 GPMHydraulic motor, 3 GPM

Cap screw, 5/16” NC x 3 1/4” hex head (for 202 motor)Repair kit for FMC series pump

Repair kit for 202, 203, 204, 206 and 210 motorRepair kit for 200 series HYD motors with Teflon lip seal

LIST PRICE$.65

$6.46$323.08

$3.23 $1.96

$116.56 $264.80 $64.62

$219.19 $1.27 $5.19

$10.33 $413.03

$.70 $3.23 $1.96 $2.60

$25.34 $.70

$7.73 $1.33 N/A

$162.17$12.67 $36.74

$872.95 $872.95

$2.60 $76.91

$128.22 $81.28

PARTS BREAKDOWN FMC-HYD-202 / -203

Pumps Located on Page 204

PARTS BREAKDOWN FMC-HYD


REF#11233

4•*556•6*

6A•*7•*8899

10111213141516

PART#BAC-5341120

BAC-12BAC-23-A

BAC-23-A-SSBAC-24-HYD-SS

BAC-26-HYD-VALOXBAC-26-HYD-CI

BAC-7VBAC-7SC

40160BAC-4A

BAC-14-HYDBAC-14-HYD-300A

4095040930


BAC-32-SBACH-25

BAC-6-HYD-SS


Pipe plug, stainless steel (optional)Volute, 1 1/4” x 1”, cast iron

Nut, 3/8” NF, cad platedNut, 3/8” NF, stainless steel (optional)

Washer, 3/8” star, stainless steelImpeller, Valox, keyway

Impeller, cast iron, keyway (optional)Seal, carbon/ceramic/Viton® (includes 40160)

Seal, silicon carbide/Viton® (includes 40160) optionalO ring, shaft sealO ring, body seal

Mounting frame, cast iron(for 200 series hyd. motor)Mounting frame, cast iron(for 300A series hyd. motor)

Cap screw, 3/8” NC x 3/4” hex headCap screw, 3/8” NC x 3/8” hex head, stainless

steel (optional)Slinger

Snap ring, internal, BAC-14 mounting frameBall bearing, sealed, BAC-6 shaftSnap ring, external, BAC-6 shaft


Shaft, 5/8” diameter, keyway and tank slot,stainless

LIST PRICE$.65

$6.46$323.08 $3.23 $11.66 $1.96

$116.56 $264.80 $64.62

$219.19 $1.27

$10.33 $413.03 $452.31

$.70 $3.23

$1.96 $2.60

$25.34 $.70

$7.73 $1.33

$162.17

QTY441111111

111144

1222111

REF#171718181919192020202122232425252626•*

PART#BAC-75-HYD-204BAC-75-HYD-210

S200S300

BAC-75-HYD-204NBAC-75-HYD-210NBAC-75-HYD-310

41253412544133041875


41448BAC-79-5BAC-79-7LS-204NLS-210NRK-FMC

RK-FMCSC

RK-BAC-75-HYD-LRK-BAC-75-HYD-300-L

DESCRIPTIONHydraulic motor, 4 GPM (includes part 18-25)

Hydraulic motor, 10 GPM (includes parts 18 -25)Seal support spacer for 200 series hydraulic motorSeal support spacer for 300 series hydraulic motorHydraulic motor, 4 GPM (motor only-no external fittings)

Hydraulic motor, 10 GPM (motor only-no external fittings)Hydraulic motor, 16 GPM (310A motor effective 03/06)Cap screw, 5/16”NC x 3 1/2” socket head (for 204N motor)Cap screw, 5/16”NC x 4” socket head (for 210N motor)Cap screw, 5/16” NC x 3/4” hex head (for 310 motor)

O ring, #8 SAE fittingReverse check valve, #8 SAE male x 1/2” FPT

Adapter, restrictor body, #8 SAE male x 1/2” FPTO ring, orifice insert

Orifice, restrictor insert, .078 (204N)Orifice, restrictor insert, .109 (210N)

Flow limiting valve (204N), #8 SAE male x 1/2” FPTFlow limiting valve (210N), #8 SAE male x 1/2” FPT

Repair kit for FMC series pumpRepair kit for FMC series pump with silicon

carbide sealRepair kit for 200 series motor with lip seal

Repair kit for 310 motor with lip seal

LIST PRICE$800.73$846.34$12.67 $12.67

$780.46 $824.80

$1,266.98 $2.60 $2.60 $.70

$1.27 $36.24 $28.51 $1.27

$14.32 $14.32 $110.23 $110.23 $76.91

$231.48

$81.28 $128.22

QTY111111144421111111--

--

QTY3311111111111441222111111114111

LIST PRICE CATALOG


SPRAYER

SPECIALTIES


205

205

PUMPS PUMPSA

CE

PU

MP

S


• Port Sizes: 1-1/2” NPT inlet, 1-1/4” NPT Outlet; 150F Models: 220 flange (1-1/2” FPT), 200 flange (1-1/4” FPT)• Recommended for use on the following Hydraulic Systems: - Pressure Compensating Close Center - Load Sensing or Pressure Flow Compensating Closed Center - Open Center up to 16 GPM• Integral needle valve bypasses up to 9 GPM on Open Center Systems• Pump seals: Standard Viton®/Carbon/Ceramic standard or Optional Severe Duty Silicon Carbide Mechanical Seal• Chemical Resistant Valox® or Optional Cast Iron or Polypropylene Impeller• Stainless Steel Shaft and Wear Ring

PART NUMBERFMC-150-HYD-206FMC-150-HYD-206-CIFMC-150-HYD-206-SSFMC-150-HYD-206-CI-SSFMC-150-HYD-210FMC-150-HYD-304FMC-150-HYD-305FMC-150-HYD-306FMC-150-HYD-310FMC-150F-HYD-206FMC-150F-HYD-206-CIFMC-150F-HYD-206-SSFMC-150F-HYD-304FMC-150F-HYD-310FMC-150FS-HYD-206FMC-150FS-HYD-206-CIFMC-150FS-HYD-310FMCSC-150-HYD-206FMCSC-150-HYD-206-CIFMCSC-150-HYD-206-SSFMCSC-150-HYD-206-SS-CIFMCSC-150-HYD-304FMCSC-150-HYD-305FMCSC-150-HYD-310FMCSC-150F-HYD-206FMCSC-150F-HYD-206-SSFMCSC-150F-HYD-304FMCSC-150FS-HYD-206FMCSC-150FS-HYD-206-CIFMCSC-150FS-HYD-306

MAXGPM135135135135135135135135135135135135135135135135135135135135135135135135135135135135135135

MAXPSI120120120120120120120120120120120120120120120120120120120120120120120120120120120120120120

MAX HYDGPM

7777

1011--

25777112577

25777711-

25771177-

PORT SIZES1-1/2” FPT Inlet x 1-1/4” FPT Outlet1-1/2” FPT Inlet x 1-1/4” FPT Outlet1-1/2” FPT Inlet x 1-1/4” FPT Outlet1-1/2” FPT Inlet x 1-1/4” FPT Outlet1-1/2” FPT Inlet x 1-1/4” FPT Outlet1-1/2” FPT Inlet x 1-1/4” FPT Outlet1-1/2” FPT Inlet x 1-1/4” FPT Outlet1-1/2” FPT Inlet x 1-1/4” FPT Outlet1-1/2” FPT Inlet x 1-1/4” FPT Outlet

220 x 200 Universal Flange220 x 200 Universal Flange220 x 200 Universal Flange220 x 200 Universal Flange220 x 200 Universal Flange220 x 200 Universal Flange220 x 200 Universal Flange220 x 200 Universal Flange

1-1/2” FPT Inlet x 1-1/4” FPT Outlet1-1/2” FPT Inlet x 1-1/4” FPT Outlet1-1/2” FPT Inlet x 1-1/4” FPT Outlet1-1/2” FPT Inlet x 1-1/4” FPT Outlet1-1/2” FPT Inlet x 1-1/4” FPT Outlet1-1/2” FPT Inlet x 1-1/4” FPT Outlet1-1/2” FPT Inlet x 1-1/4” FPT Outlet

220 x 200 Universal Flange220 x 200 Universal Flange220 x 200 Universal Flange220 x 200 Universal Flange220 x 200 Universal Flange220 x 200 Universal Flange

PUMP SEALSViton® / CeramicViton® / CeramicViton® / CeramicViton® / CeramicViton® / CeramicViton® / CeramicViton® / CeramicViton® / CeramicViton® / CeramicViton® / CeramicViton® / CeramicViton® / CeramicViton® / CeramicViton® / CeramicViton® / CeramicViton® / CeramicViton® / Ceramic

Severe Duty Silicon CarbideSevere Duty Silicon CarbideSevere Duty Silicon CarbideSevere Duty Silicon CarbideSevere Duty Silicon CarbideSevere Duty Silicon CarbideSevere Duty Silicon CarbideSevere Duty Silicon CarbideSevere Duty Silicon CarbideSevere Duty Silicon CarbideSevere Duty Silicon CarbideSevere Duty Silicon CarbideSevere Duty Silicon Carbide

LIST PRICE$1,422.25$1,513.01$1,444.38 $1,535.14 $1,422.25 $1,627.01 $1,848.37 $1,848.37 $1,804.10 $1,488.66 $1,579.41 $1,510.79 $1,693.41 $1,870.50 $2,506.92 $2,597.68 $2,888.77 $1,527.39 $1,618.15 $1,549.53 $1,640.29 $1,732.15 $1,953.51 $1,909.24 $1,593.80 $1,615.94 $1,778.64 $2,612.06 $2,702.82 $3,038.19


PART NUMBERFMC-150-HYD-LMFMC-150-HYD-CI-LMFMC-150-HYD-SS-LMFMC-150F-HYD-LMFMC-150F-HYD-CI-LMFMC-150F-HYD-300-LMFMC-150FS-HYD-LMFMCSC-150-HYD-LMFMCSC-150-HYD-LM-CIFMCSC-150-HYD-300-LMFMCSC-150F-HYD-LMFMCSC-150FS-HYD-LM-CI

DESCRIPTIONPump less motor for FMC-150-HYD-206 model

Pump less motor for FMC-150-HYD-206-CI modelPump less motor for FMC-150-HYD-206-SS modelPump less motor for FMC-150F-HYD-206 model

Pump less motor for FMC-150F-HYD-206-CI modelPump less motor for FMC-150F-HYD-3## modelPump less motor for FMC-150FS-HYD models

Pump less motor for FMCSC-150-HYD-206 modelPump less motor for FMCSC-150-HYD-206-CI model

Pump less motor for FMCSC-150-HYD-3## modelPump less motor for FMCSC-150F-HYD-206 model

Pump less motor for FMCSC-150FS-HYD-206-CI model

LIST PRICE$1,117.88$1,208.63$1,140.01 $1,184.28 $1,275.04 $1,206.42 $2,202.55 $1,223.02 $1,313.78 $1,289.43 $1,289.43 $2,398.45

Pump Less Motor OPTION DISCRIPTIONFMCSC Silicone carbide shaft seal for abrasives-CI Cast iron impeller-SS Stainless steel fitted package including impeller nut, capscrews, and pipe plugs-FS Flanged ports & Stainless Steel

LIST PRICE CATALOG


SPRAYER

SPECIALTIES


206

206

PUMPS AC

E PU

MP

S

REF#112233

4•*45556•6*

6A•*7•*8991011121314151617181920212223242526•*#

PART#BAC-5341120

BAC-12-150BAC-12-150-FLG

BAC-23-ABAC-23-B-SS

BAC-24-HYD-SSBAC-24-B-SSBAC-26-150-PBAC-26-150-CIBAC-26-150-PI

BAC-7VBAC-7SC

40160BAC-4-150

BAC-14-150-HYD4095040930


BAC-32-SBACH-25

BAC-6-HYD-SSBAC-75-HYD-206

S200BAC-75-HYD-206N

4125541875


41448BAC-79-7LS-206N

RK-FMC-150RK-FMCSC-150

RK-BAC-75-HYD-L


Pipe plug, stainless steel (optional)Volute, 1 1/2” x 1 1/4”

Volute, 220 x 200 FlangedNut, 3/8” NF, cad plated

Nut, 3/8” NF, stainless steel (standard on -SS models)Washer, 3/8” star, stainless steel

Washer, 3/8” stainless steel, vibration proof (standard on -SS models)Impeller, Valox, keyway

Impeller, cast iron, keyway (optional)Impeller, polypropylene, keyway (optional)

Seal, carbon/ceramic/Viton® (includes 40610 o-ring)Seal, silicon carbide/Viton® (includes 40610 o-ring)(optional)

O ring, shaft sealO ring, body seal

Mounting frame (for 200 series hydraulic motor)Cap screw, 3/8” NC x 3/4” hex head

Cap screw, 3/8” NC x 3/4” hex head, stainless steel (optional)Slinger

Snap ring, internal, BAC-14 mounting frameBall Bearing, sealed, BAC-6 shaftSnap ring, external, BAC-6 shaft


Shaft, 5/8” diameter, keyway and tang slot, stainless steelHydraulic motor, 7 GPM (includes parts 18 - 25)

Seal support spacer for 200 series hydraulic motorHydraulic motor, 7 GPM (motor only - no external fittings)

Cap screw, 5/16” NC x 3 3/4” socket head (for 206N motor)O ring, #8 SAE fitting

Reverse check valve, #8 SAE male x 1/2” FPTAdapter, restrictor body, #8 SAE male x 1/2” FPT

O ring, orifice insertOrifice, restrictor insert, .109 (206N)

Flow limiting valve (206N), #8 SAE male x 1/2” FPTRepair kit for FMC-150 series pump

Repair kit for FMC-150 series pump with silicon carbide shaft sealRepair kit for 200-L series motor

LIST PRICE$.65

$6.46$400.36 $477.65

$3.23 $1.33 $1.96 $9.06

$116.56 $278.73 $120.36 $64.62

$219.19 $1.27

$10.33 $497.92

$.70 $3.23 $1.96 $2.60

$25.34 $.70

$7.73 $1.33

$162.77 $800.73 $12.67

$780.46 $2.60 $1.27

$36.24 $28.51 $1.27

$14.32 $110.23 $76.91

$231.48 $81.28

QTY441111111111111114412221111114211111

PARTS BREAKDOWN FMC-150-HYD-206Pumps Located on Page 206

LIST PRICE CATALOG


SPRAYER

SPECIALTIES


207

207

PUMPS PUMPSA

CE

PU

MP

S


• Port Sizes: 2” NPT inlet, 1-1/2” NPT Outlet; 200F Models: 300 flange inlet x 220 flange outlet• Recommended for use on the following Hydraulic Systems: - 210 • Pressure Compensating Closed Center Systems; Load Sensing Closed Center Systems, Open Center Systems up to 17 GPM using internal needle valve bypass - 304 • Pressure Compensating Closed Center Systems; Load Sensing Closed Center Systems, Open Center Systems up to 20 GPM using internal needle valve bypass - 310 • Large Open Center Systems up to 34.7 GPM using internal needle valve bypass• Pump seals: Standard Viton®/Carbon/Ceramic standard or Optional Severe Duty Silicon Carbide Mechanical Seal• Chemical Resistant Valox® or Optional Cast Iron or Polypropylene Impeller• Stainless Steel Shaft and Wear Ring

PART NUMBERFMC-200-HYD-210FMC-200-HYD-304FMC-200-HYD-307FMC-200-HYD-310FMC-200-HYD-210-CIFMC-200-HYD-304-CIFMC-200-HYD-310-CIFMC-200-HYD-210-SSFMC-200-HYD-304-SSFMC-200-HYD-310-SSFMC-200-HYD-304-SIFMC-200-HYD-310-SIFMC-200F-HYD-304FMC-200F-HYD-307FMC-200F-HYD-310FMC-200F-HYD-304-CIFMC-200F-HYD-304-SSFMC-200F-HYD-310-SSFMCSC-200-HYD-210FMCSC-200-HYD-304FMCSC-200-HYD-307FMCSC-200-HYD-310FMCSC-200-HYD-210-CIFMCSC-200-HYD-304-CIFMCSC-200-HYD-307-CIFMCSC-200-HYD-310-CIFMCSC-200-HYD-210-SSFMCSC-200-HYD-304-SSFMCSC-200F-HYD-210FMCSC-200F-HYD-304FMCSC-200F-HYD-307FMCSC-200F-HYD-210-CIFMCSC-200F-HYD-304-CIFMCSC-200F-HYD-304-SS

MAXGPM180200180200180200200180200200200200200180200200200200180200180200180200180200180200180200180180200200

MAXPSI80

12010512080

12012080

12012012012012010512012012012080

12010512080

12010512080

12080

12010580

120120

MAX HYDGPM

10111725101125101125112511172511112510111725101117251011101117101111

PORT SIZES2” FPT Inlet x 1-1/2” FPT Outlet2” FPT Inlet x 1-1/2” FPT Outlet2” FPT Inlet x 1-1/2” FPT Outlet2” FPT Inlet x 1-1/2” FPT Outlet2” FPT Inlet x 1-1/2” FPT Outlet2” FPT Inlet x 1-1/2” FPT Outlet2” FPT Inlet x 1-1/2” FPT Outlet2” FPT Inlet x 1-1/2” FPT Outlet2” FPT Inlet x 1-1/2” FPT Outlet2” FPT Inlet x 1-1/2” FPT Outlet2” FPT Inlet x 1-1/2” FPT Outlet2” FPT Inlet x 1-1/2” FPT Outlet


2” FPT Inlet x 1-1/2” FPT Outlet2” FPT Inlet x 1-1/2” FPT Outlet2” FPT Inlet x 1-1/2” FPT Outlet2” FPT Inlet x 1-1/2” FPT Outlet2” FPT Inlet x 1-1/2” FPT Outlet2” FPT Inlet x 1-1/2” FPT Outlet2” FPT Inlet x 1-1/2” FPT Outlet2” FPT Inlet x 1-1/2” FPT Outlet2” FPT Inlet x 1-1/2” FPT Outlet2” FPT Inlet x 1-1/2” FPT Outlet


PUMP SEALSViton® / CeramicViton® / CeramicViton® / CeramicViton® / CeramicViton® / CeramicViton® / CeramicViton® / CeramicViton® / CeramicViton® / CeramicViton® / CeramicViton® / CeramicViton® / CeramicViton® / CeramicViton® / CeramicViton® / CeramicViton® / CeramicViton® / CeramicViton® / Ceramic

Severe Duty Silicon CarbideSevere Duty Silicon CarbideSevere Duty Silicon CarbideSevere Duty Silicon CarbideSevere Duty Silicon CarbideSevere Duty Silicon CarbideSevere Duty Silicon CarbideSevere Duty Silicon CarbideSevere Duty Silicon CarbideSevere Duty Silicon CarbideSevere Duty Silicon CarbideSevere Duty Silicon CarbideSevere Duty Silicon CarbideSevere Duty Silicon CarbideSevere Duty Silicon CarbideSevere Duty Silicon Carbide

LIST PRICE$1,671.28$1,676.81$1,698.95 $1,770.89 $1,762.04 $1,767.57 $1,861.65 $1,693.41 $1,698.95 $1,793.03 $1,925.84 $2,019.92 $1,831.77 $1,853.90 $1,925.84 $1,922.52 $1,853.90 $1,947.98 $1,776.43 $1,781.96 $1,804.10 $1,876.04 $1,867.18 $1,872.72 $1,894.85 $1,966.80 $1,798.56 $1,804.10 $1,931.38 $1,936.31 $1,959.05 $2,022.14 $2,027.67 $1,959.05


PART NUMBERFMC-200-HYD-LMFMC-200-HYD-300-LMFMC-200F-HYD-300-LMFMCSC-200-HYD-LMFMCSC-200-HYD-300-LMFMCSC-200F-HYD-LMFMCSC-200F-HYD-300-LM

PORT SIZESPump less motor for FMC-200-HYD-210 model

Pump less motor for FMC-200-HYD-3XX modelsPump less motor for FMC-200F-HYD-3XX modelsPump less motor for FMCSC-200-HYD-210 model

Pump less motor for FMCSC-200-HYD-3XX modelsPump less motor for FMCSC-200F-HYD-210 modelPump less motor for FMCSC-200F-HYD-3XX model

LIST PRICE$1,195.35$1,217.49$1,372.44 $1,300.50 $1,300.50 $1,455.45 $1,455.45

Pump Less Motor OPTION DISCRIPTIONFMCSC Silicone carbide shaft seal for abrasives200F Flanged pump ports for 200 series models: Inlet 300 series flange x Outlet 220 full port flange-CI Cast iron impeller-SI 316 Stainless steel impeller for 200 series models (standard on 200SS models)-SS Stainless steel fitted package including impeller nut, capscrews, and pipe plugs

PERFORMANCE CHARTSON PAGE 209

LIST PRICE CATALOG


SPRAYER

SPECIALTIES


208

208

PUMPS AC

E PU

MP

S

REF#11222345556*6*7*7

7A899

10111213141515161617171819192020*####

PART#BAC-5341120

7AC-14-CCW7AC-14-FLG

7AC-14-FLG-ABAC-23-A

BAC-24-HYD-SSBAC-26-200-CIBAC-26-200-P

BAC-26-HYD-200-CIBAC-4

BAC-4ABAC-7V

BAC-7SC40160

BAC-14-HYD-3004095040930


BAC-32-SBAC-25

BACH-25BAC-6-HYD-200-SS

BAC-6-HYD-SSS200S300

BAC-76-HYDBAC-75-HYD-210BAC-75-HYD-304BAC-75-HYD-310

41330RK-FMC

RK-BAC-75-HYDRK-BAC-75-HYD-L

RK-BAC-75-HYD-300RK-BAC-75-HYD-300-L


Pipe plug, stainless steel (optional)Volute, 2” NPT x 1 1/2” NPT

Volute, 300 standard port flange x 220 full port flangeVolute, 300 Standard port flange x 200 Standard port flange

Nut, 3/8” NF, cad platedWasher, 3/8” star, stainless steel

Impeller, with extended keyway, cast iron (optional)Impeller, with extended keyway, thermoplastic

Impeller, cast iron, keyway (obsolete 6/99)Gasket, 4 hole

O ring, body seal, effective April 1996Seal, mechanical, Viton® (includes 40160 o ring)

Seal, mechanical, silicon carbide (includes 40160 o ring)(optional)O ring, shaft seal

Mounting frame (for -300 series hydraulic motor)Cap screw, 3/8” NC x 3/4” hex head

Cap screw, 3/8” NC x 3/4” hex head, stainless steel (optional)Slinger

Snap ring, internal, BAC-14 mounting frameBall bearing, sealed, BAC-6 shaftSnap ring, external, BAC-6 shaft

Spacer for BAC-6 shaftKey, 1/8” x 1/8” x 13/16”, extended keyway

Key, 1/8” x 1/8” x 1/2” (obsolete 6/99)Shaft, extended keyway, tang, stainless steel

Shaft, 5/8” diameter, keyway and tang slot, stainless steel (optional)Seal support spacer for 200 series hydraulic motor, effective 6/00Seal support spacer for 300 series hydraulic motor, effective 6/00

Coupling for hydraulic motorHydraulic motor, 8 GPMHydraulic motor, 11 GPM

Hydraulic motor, 16-25 GPM Cap screw, 5/16” NC x 3/4” hex head, motor to pump

Repair kit for FMC series pumpRepair kit for 200 series hydraulic motor

Repair kit for 200 series -L hydraulic motor (effective 10/1/99)Repair kit for 304 hydraulic motor

Repair kit for 304 series -L hydraulic motor

LIST PRICE$.65$6.46

$439.64 $549.87 $614.48

$3.23 $1.96

$342.08 $168.51 $342.08

$5.19 $10.33 $64.62

$219.19 $1.27

$439.64 $.70 $3.23 $1.96 $2.60

$25.34 $.70 $7.73 $1.33 $1.33

$162.17 $162.17 $12.67 $12.67 $36.74

$846.34 $1,202.36 $1,266.98

$.70 $76.91

$128.22 $81.28

$128.22 $128.22

QTY4411111111111111441222111111111114

PARTS BREAKDOWN FMC-200-HYD


PERFORMANCE CHART - FMC-200-HYD-210 PERFORMANCE CHART - FMC-200-HYD-304 PERFORMANCE CHART - FMC-200-HYD-310

LIST PRICE CATALOG


SPRAYER

SPECIALTIES


209

209

PUMPSA

CE

PU

MP

S

HYDRAULIC DRIVEN CENTRIFUGAL PUMPSFMCSC-155FS-HYD

Features:• Port Sizes: 220 series full port flange & 1-1/2” NPT inlet 200 series standard port flange & 1-1/4” NPT outlet• 316 Stainless Steel Housing• Recommended for use on the following Hydraulic Systems: - Pressure Compensating Closed Center - Load Sensing or Pressure Flow Compensating Closed Center - Open Center up to 16 GPM• Integral Needle Valve bypasses up to 9 GPM on Open Center Systems• Severe Duty Silicon Carbide/Viton® Mechanical Seal with O-ring Seat for Improved Survivability• Chemical Resistant Valox® Impeller and Optional Cast Iron or Polypropylene available• Stainless Steel Shaft

PART NUMBERFMCSC-155FS-HYD-206FMCSC-155FS-HYD-206-PI

MAXGPM145145

MAXPSI120120

MAX HYDGPM

77

PORT SIZES220 x 200 Universal Flange220 x 200 Universal Flange

PUMP SEALSSevere Duty Silicon CarbideSevere Duty Silicon Carbide

LIST PRICE$2,612.06$2,612.06


REF#12345556*7*89

101112131415161718192021222324*#

PART#41120

BAC-12-150-SSBAC-23-B-SSBAC-24-B-SSBAC-26-150-PBAC-26-150-CIBAC-26-150-PI

BAC-4-150BAC-7SC-205V

BAC-14-155-HYD-SS40930

BAC-54BACH-32-HD

BACH-3340880

BACH-25BAC-6-155-HYD-SS

S255BAC-75-HYD-206N5

4125541875


41448BAC-79-7LS-206N

RK-FMCSC-155RK-BAC-75-HYD-L

DESCRIPTIONPipe plug, stainless steel

Volute, 316 stainless steel, NPT & flangedNut, 3/8” NF, stainless steel

Washer, 3/8”, stainless steel, vibration proofImpeller, Valox, keyway


O-ring, body sealSeal, silicon carbide/Viton®

Mounting frame, 316 stainless steelCap screw, 3/8” NC x 3/4” hex head, stainless steel

SlingerSnap ring, external, shaft

Snap ring, internal, mounting frameBall bearing, sealed

Key, 1/8” x 1/8” x 1/2”Shaft, 5/8” diameter, keyway and tang slot, stainless steel

Seal support spacer for 200 series hydraulic motorHydraulic motor, 7 GPM (motor only - no external fittings)

Cap screw, 5/16” NC x 3-3/4” socket head (for 206N motor)O-ring, #8 SAE fitting

Reverse check valve #8 SAE male x 1/2” NPT femaleAdapter, restrictor body, #8 SAE male x 1/2” NPT female

O-ring, orifice insertOrifice, restrictor insert, .109 (206N)

Flow limiting valve (206N), #8 SAE male x 1/2” NPT female (optional)Repair kit for FMC-155 series with silicon carbide shaft seal

Repair kit for 200 series motor

LIST PRICE$6.46

$1,046.52$1.33 $9.06

$116.56 $278.73 $120.36 $10.33

$219.19 $1,098.47

$3.23 $1.96 $3.86 $1.96

$31.67 $1.33

$271.13 $15.20

$864.08 $2.60 $1.27

$36.24 $28.51 $1.27

$14.32 $110.23 $231.48 $81.28

QTY4111111111413221111421111

PARTS BREAKDOWN FMCSC-155FS-HYD

LIST PRICE CATALOG


SPRAYER

SPECIALTIES


210

210

PUMPS PUMPS AC

E PU

MP

S

HYDRAULIC DRIVEN CENTRIFUGAL PUMPSFMCSC-205FS-HYDFeatures:

• Port Sizes: 300 series flange inlet 220 series full port flange• -FS Model - 316 Stainless Steel Housing• Recommended for use on the following Hydraulic Systems: - Pressure Compensating Closed Center - Load Sensing or Pressure Flow Compensating Closed Center - Open Center from 10 to 20 GPM • Integral Needle Valve bypasses up to 9 GPM on Open Center Systems• Severe Duty Silicon Carbide/Viton® Mechanical Seal with O-ring Seat for Improved Survivability• Larger 203 Bearings for Longer Life• Chemical Resistant Valox® Impeller and Optional Cast Iron or 316 Stainless Steel available

PART NUMBERFMCSC-205F-HYD-304FMCSC-205F-HYD-304-CIFMCSC-205FS-HYD-304FMCSC-205F-HYD-300-LMFMCSC-205FS-HYD-300-LM

MAXGPM240240240

MAXPSI120120120

MAX HYDGPM

131313

PORT SIZES300 x 220 Universal Flange300 x 220 Universal Flange300 x 220 Universal Flange

PUMP SEALSSevere Duty Silicon CarbideSevere Duty Silicon CarbideSevere Duty Silicon Carbide

LIST PRICE$1,936.91$2,027.67$3,043.72 $1,455.45 $2,562.26


Pump less motor for FMCSC-205F-HYD-304Pump less motor for FMCSC-205FS-HYD-304 (stainless)

REF#1122345556*7*8899

10111213141516171819202122232425*#

PART#BAC-5341120

7AC-14-FLG7AC-14-FLG-SS

BAC-23-B-SSBAC-24-B-SSBAC-26-200-PBAC-26-200-CIBAC-26-200-SS

BAC-4ABAC-7SC-205V

BAC-14-205-HYDBAC-14-205-HYD-SS

409504093041330

BAC-54BACH-33

BACH-32-HD40880

BAC-6-205-HYD-SSBAC-25

S305BAC-75-HYD-304N

4187541445

BAC-80-8SAE41448

BAC-79-8BAC-78-10SAE

LS-304NRK-FMCSC-205

RK-BAC-75-HYD-300-L


Pipe plug, stainless steel (-FS model)Volute, 300 flange x 220 flange, cast iron

Volute, 300 flange x 220 flange, 316 stainless steel (-FS model)Nut, 3/8” NF, stainless steel

Washer, 3/8”, stainless steel, self-lockingImpeller, Valox, keyway

Impeller, cast iron, keyway (optional)Impeller, 316 stainless steel (-FS model) (optional)


Mounting frame for 205 pumpMounting frame for 205 pump, stainless steel (-FS model)

Cap screw, 3/8” NC x 3/4” hex headCap screw, 3/8” NC x 3/4” hex head, stainless steel (-FS model)

Cap screw, 5/16” NC x 3/4” hex head, motor to pumpSlinger

Snap ring, internal, BAC-14-205 mounting frameSnap ring, external, BAC-6-205 shaftBall bearing, sealed, BAC-6-205 shaft

Shaft, extended keyway, tang, stainless steelKey, 1/8” x 1/8” x 13/16”, extended keywaySeal support spacer for 205 series pump

Hydraulic motor, 11 GPMO-ring, #8 SAE fitting

O-ring, #10 SAE fittingBody, restrictor orifice, #8 SAE x 1/2” NPT

O-ring, orifice insertOrifice insert, restrictor insert, 0.125

Reverse check assembly, #10 SAE x 1/2” NPTFlow limiter (optional)

Repair kit for FMC-205 pump with silicon carbide shaft sealRepair kit for 300 series hydraulic motor

LIST PRICE$.65$6.46

$549.87 $1,052.86

$1.33 $9.06

$168.51 $342.08 $458.65 $10.33

$219.19 $471.32

$1,111.14 $.70 $3.23 $.70 $1.96 $1.96 $3.86

$31.67 $245.79

$1.33 $20.27

$1,189.69 $1.27 $1.27

$28.51 $1.27

$14.32 $36.74 $110.23 $231.48 $128.22

QTY4411111111111444123211111111111

PARTS BREAKDOWN FMCSC-205F-HYD

LIST PRICE CATALOG


SPRAYER

SPECIALTIES


211

211

HYDRAULIC DRIVEN CENTRIFUGAL PUMPSFMCSC-150F-HYD-PWMFeatures:

• Port Sizes: 220 series full port flange & 1-1/2” NPT inlet 200 series standard port flange & 1-1/4” NPT outlet• Cast Iron or 316 Stainless Steel Housing (FS)• Integrated Proportional 12V Control Valve for Precision Ag applications using Pulse width Modulated (PWM) control signals• Recommended for use on the following Hydraulic Systems: - Pressure Compensating Closed Center - Load Sensing or Pressure Flow Compensating Closed Center• Severe Duty Silicon Carbide/Viton® Mechanical Seal with O-ring Seat for Improved Survivability• Chemical Resistant Thermoplastic Impeller and Optional Cast Iron or Polypropylene available• Stainless Steel Shaft

PART NUMBERFMCSC-150F-HYD-206-PWMFMCSC-150FS-HYD-206-PWMFMCSC-150F-HYD-304-PWMFMCSC-155FS-HYD-304-PWM

MAXGPM145145155155

MAXPSI120120130130

MAX HYDGPM

771111

PORT SIZES220 x 200 Universal Flange220 x 200 Universal Flange 220 x 200 Universal Flange220 x 200 Universal Flange

PUMP SEALSSevere Duty Silicon CarbideSevere Duty Silicon CarbideSevere Duty Silicon CarbideSevere Duty Silicon Carbide

LIST PRICE$2,767.02$3,758.28$2,971.78 $3,990.04


PUMPS PUMPSA

CE

PU

MP

S

REF#112234555

6•*#7•7*7#889

10111212131314141516161717181920•*#

PART#BAC-5341120

BAC-12-150-FLGBAC-12-150-SSBAC-23-B-SSBAC-24-B-SSBAC-26-150-PBAC-26-150-CIBAC-26-150-PI

BAC-4-150BAC-7V

BAC-7SCBAC-7SC-205V

BAC-14-150-HYD-300ABAC-14-155-HYD-SS

4093041330

BAC-54BAC-32

BACH-32-HDBAC-33

BACH-33BAC-3740880

BACH-25BAC-6-HYD-SS

BAC-6-155-HYD-SSS300S305

BAC-75-HYD-304-PWM41445

BAC-78-10X10SAERK-FMC-150

RK-FMCSC-150RK-FMCSC-155

RK-BAC-75-HYD-300-L


Pipe plug, stainless steel (155FS model)Volute, 1-1/2” NPT & 220 flange x 1-1/4” NPT & 200 flange, cast iron

Volute, 1-1/2” NPT & 220 flange x 1-1/4” NPT & 200 flange, 316 stainless steel (155FS model)Nut, 3/8” NF, stainless steel

Washer, 3/8”, stainless steel, vibration proofImpeller, thermoplastic, keyway


O-ring, body sealSeal, mechanical, carbon/ceramic/Viton® (includes 40160 o-ring) (150F model)Seal, mechanical, silicon carbide (includes 40160 o-ring)(optional)(150F model)

Seal, silicon carbide (155FS model)Mounting frame (for 300N series hydraulic motor) (150F model)

Mounting frame, 316 stainless steel (155FS model)Cap screw, 3/8” NC x 3/4” hex head, stainless steel

Cap screw, 5/16” NC x 3/4” hex headSlinger

Snap ring, external, BAC-6 shaft (150F model)Snap ring, external, shaft (155FS model)

Snap ring, internal, BAC-14 mounting frame (150F model)Snap ring, internal, mounting frame (155FS model)

Ball bearing, sealed, BAC-6 shaft (150F model)Ball bearing, sealed (155FS model)

Key, 1/8” x 1/8” x 1/2”Shaft, 5/8” diameter, keyway and tang slot, stainless steel (150F model)

Shaft, 5/8” diameter, keyway and tang slot, stainless steel (155FS model)Seal support spacer for 300 series hydraulic motor (150F model)

Seal support spacer for 305 series hydraulic motor (155FS model)Hydraulic motor, 11 GPM, PWM

O-ring, #10 SAE fittingReverse check valve, #10 SAE male x #10 SAE female

Repair kit for FMC-150F series pumpRepair kit for FMCSC-150F series pump with silicon carbide shaft seal

Repair kit for FMCSC-155FS series pump with silicon carbide shaft sealRepair kit for 300 series hydraulic motor

LIST PRICE$.65$6.46

$477.65 $1,046.52

$1.33 $9.06

$116.56 $278.73 $120.36 $10.33 $64.62 $219.19 $219.19 $542.27

$1,098.47 $3.23 $.70 $1.96 $.70 $3.86 $2.60 $1.96

$25.34 $31.67 $1.33

$162.17 $271.13 $12.67 $20.27

$2,482.01 $1.27

$45.23 $76.91

$231.48 $231.48 $128.22

QTY44111111111111144123222211111111

150F 155FS

PARTS BREAKDOWN FMCSC-150F/155FS-HYD-304-PWM


212

212

PUMPS AC

E PU

MP

S

HYDRAULIC DRIVEN CENTRIFUGAL PUMPSFMCSC-205F-HYD-PWMFeatures:

• Port Sizes: 300 series flange inlet 220 series full port flange• Cast Iron (-F model) or 316 Stainless Steel Housing (-FS model)• Integrated Proportional 12V Control Valve for Precision Ag applications using Pulse width Modulated (PWM) control signals• Integrated Pressure Relief Valve prevents overspeeding• Recommended for use on the following Hydraulic Systems: - Pressure Compensating Closed Center - Load Sensing or Pressure and Flow Compensating Closed Center• Severe Duty Silicon Carbide/Viton® Mechanical Seal with O-ring Seat for Improved Survivability• Chemical Resistant Thermoplastic Impeller and Optional Cast Iron or 316 Stainless Steel (-FS models) available• Stainless Steel Shaft

PART NUMBERFMCSC-205F-HYD-304-PWMFMCSC-205FS-HYD-304-PWM

MAXGPM240240

MAXPSI120120

MAX HYDGPM

1313

PORT SIZES300 x 220 Universal Flange300 x 220 Universal Flange

PUMP SEALSSevere Duty Silicon CarbideSevere Duty Silicon Carbide

LIST PRICE$3,110.13$4,216.94


REF#1122345556*7*8899

1011121314151617181920*#

PART#BAC-5341120

7AC-14-FLG7AC-14-FLG-SS

BAC-23-B-SSBAC-24-B-SSBAC-26-200-PBAC-26-200-CIBAC-26-200-SS

BAC-4ABAC-7SC-205V

BAC-14-205-HYDBAC-14-205-HYD-SS

409504093041330

BAC-54BACH-33

BACH-32-HD40880

BAC-25BAC-6-205-HYD-SS

S305BAC-75-HYD-304-PWM

41445BAC-78-10X10SAE

RK-FMCSC-205RK-BAC-75-HYD-300-L


Pipe plug, stainless steel (-FS model)Volute, 300 flange x 220 flange, cast iron

Volute, 300 flange x 220 flange, 316 stainless steel (-FS model)Nut, 3/8” NF, stainless steel

Washer, 3/8”, stainless steel, self-lockingImpeller, thermoplastic

Impeller, cast iron, keyway (optional)Impeller, 316 stainless steel (-FS model) (optional)


Mounting frame for 205 pumpMounting frame for 205 pump, 316 stainless steel (-FS model)

Cap screw, 3/8” NC x 3/4” hex headCap screw, 3/8” NC x 3/4” hex head, stainless steel (-FS model)

Cap screw, 5/16” NC x 3/4” hex head, motor to pumpSlinger

Snap ring, internal, BAC-14-205 mounting frameSnap ring, external, BAC-6-205 shaftBall bearing, sealed, BAC-6-205 shaft

Key, 1/8” x 1/8” x 13/16”, extended keywayShaft, extended keyway, tang, stainless steel

Seal support spacer for 205 series pumpHydraulic motor, 11 GPM, PWM

O-ring, #10 SAE fittingReverse check assembly, #10 SAE x #10 SAE

Repair kit for FMC-205 pump with silicon carbide shaft sealRepair kit for 300 series hydraulic motor

LIST PRICE$.65$6.46

$549.87 $1,052.86

$1.33 $9.06

$168.51 $342.08 $458.65 $10.33

$219.19 $471.32

$1,111.14 $.70 $3.23 $.70 $1.96 $1.96 $3.86

$31.67 $1.33

$245.79 $20.27

$2,482.01 $1.27

$45.23 $231.48 $128.22

QTY44111111111114441232111111

PARTS BREAKDOWN FMCSC-205F(S)-HYD-304-PWM

LIST PRICE CATALOG


SPRAYER

SPECIALTIES


213

213

PUMPS PUMPSA

CE

PU

MP

S

HYDRAULIC DRIVEN CENTRIFUGAL PUMPS650 MAX SERIESFeatures:

• Port Sizes: 1-1/2” NPT inlet, 1-1/4” NPT Outlet; 650F Models: 220 flange (1-1/2” FPT), 200 flange (1-1/4” FPT)• High Performance Pump - Maximum Flow 140 GPM (650 models/threaded ports) 170 GPM (650F models/flanged ports) - Maxium Pressure 160 PSI - Modified Impeller Design for Higher Pressure at Lower RPM• Maximum Reliability - -FS Model - 316 Stainless Steel - Operates at Lower RPM for Longer Life - Oversized Bearings - E-coat Corrosion Protection - High Efficiency 4000 PSI Pressure Plated Gear Motor

PART NUMBERFMC-650-HYDFMC-650-HYD-SIFMC-650F-HYDFMC-650FS-HYDFMCSC-650-HYDFMCSC-650-HYD-SSFMCSC-650F-HYDFMCSC-650FS-HYDFMC-650-HYD-LMFMC-650F-HYD-LMFMC-650FS-HYD-LMFMCSC-650-HYD-LMFMCSC-650F-HYD-LMFMCSC-650FS-HYD-LM

MAXGPM140140170170140140170170

MAXPSI160160160160160160160160

MAX HYDGPM14.514.514.514.514.514.514.514.5

PORT SIZES1-1/2” FPT Inlet x 1-1/4” FPT Outlet1-1/2” FPT Inlet x 1-1/4” FPT Outlet

220 x 200 Universal Flange220 x 200 Universal Flange

1-1/2” FPT Inlet x 1-1/4” FPT Outlet1-1/2” FPT Inlet x 1-1/4” FPT Outlet

220 x 200 Universal Flange220 x 200 Universal Flange

PUMP SEALSCarbon / Ceramic / Viton®Carbon / Ceramic / Viton®Carbon / Ceramic / Viton®Carbon / Ceramic / Viton®Silicon Carbide / Viton®Silicon Carbide / Viton®Silicon Carbide / Viton®Silicon Carbide / Viton®

LIST PRICE$2,019.92$2,268.95$2,174.88 $3,126.73 $2,147.21 $2,169.34 $2,302.16 $3,254.01 $1,505.26 $1,660.21 $2,612.06 $1,632.54 $1,787.49 $2,894.30

650 Max Series Hydraulically-Driven Pumps

Pump less motor for FMC-650-HYD modelPump less motor for FMC-650F-HYD model

Pump less motor for FMC-650FS-HYD modelPump less motor for FMCSC-650-HYD model

Pump less motor for FMCSC-650F-HYD modelPump less motor for FMCSC-650FS-HYD model

REF#1122

2

34•*556•6*6

7•*88

8a

PART#BAC-5341120

BAC-12-650BAC-12-650-FLG

BAC-12-650-FLG-SS

4093030029

BAC-26-650BAC-26-650-SS

BAC-7-650BAC-7SC-650BAC-7-650BBAC-4-150

BAC-14-650-HYDBAC-14-650-HYD-LIN

BAC-16-650-LIN


Pipe plug, stainless steel (optional)Volute, 1-1/2” x 1-1/4”, cast iron, e-coated

Volute, NPT & 220 flange x NPT & 200 flange, cast iron

Volute, 220 flange x 200 flange, 316 stainless steel (FS model)

Cap screw, 3/8” NC x 3/4” hex head,stainless steelWasher, 3/8” OD, sealing, stainless steel

Impeller, cast iron, e-coatedImpeller, stainless steel (optional)Seal, carbon/ceramic/Viton®, 3/4”

Seal, silicon carbide/Viton®, 3/4” (optional)Seal, carbon/ceramic/Buna N, 3/4” (for aqua ammonia)

O-ring, volute sealMounting frame, cast iron, e-coated Mounting frame, cast iron, e-coated,

for liner (for FS model)Liner, 316 stainless steel (FS model)

LIST PRICE$.65

$6.46$491.59 $595.48

$1,111.14

$3.23 $2.60

$335.75 $575.21 $121.63 $258.46 $110.23 $10.33

$275.39 $827.34

$445.98

QTY3311

1

1111111111

1

REF#99

10 1112131415161717

18192021222324•*

PART#4095040930

BAC-54-6504194340875

BAC-6-650-HYD-SS410854341943414

BAC-75-HYD-M16BAC-75-HYD-M16-CD

427014190741445


41448BAC-79-8

RK-FMC-650RK-FMCSC-650

DESCRIPTIONCap screw, 3/8”NC x 3/4” hex head

Cap screw, 3/8”NC x 3/4” hex head SS (optional)Slinger, 1.5” OD x 7/8” ID

Snap ring, internal, mounting frameBearing, FMC-650-models

Shaft, 1.13” dia, 11T female spline, stainless steelKey, .188 x .188 x .875, FMC-650 models O-ring, flange, M series (effective 6/15)

Pad, absorbent, M Series (effective 6/15)Hydraulic motor, pressure plated gear, 14.5 GPM

Hydraulic motor, pressure plated gear, 14.5 GPM, case drain (optional)

Washer, 3/8”Cap screw, 3/8” NC x 1”, socket head

O-ring, #10 SAE fittingReverse check, #10 SAE male x 1/2” FNPT

Body adapter/restrictor, #10 SAE male x 1/2” FNPTO-ring, restrictor insert

Restrictor orifice insert, .125Repair kit, carbon/ceramic/Viton® sealRepair kit, silicon carbide/Viton® seal

LIST PRICE$.70

$3.23$5.19 $5.19

$57.01 $411.77 $1.33 $1.90 $6.46

$1,273.31 $1,247.97

$.70$3.86 $1.27

$36.74 $28.51 $1.27

$14.32 $134.55$271.39

QTY88122111111

2221111--

PARTS BREAKDOWN FMC-650(F)(FS)-HYD

LIST PRICE CATALOG


SPRAYER

SPECIALTIES


214

214

650 MAX SERIES • OASIS WETSEAL TECHNOLOGYFeatures:• Port Sizes: 220 flange (1-1/2” FPT) Inlet, 200 flange (1-1/4” FPT) Outlet• High Performance Pump - Maximum Flow 170 GPM - Maxium Pressure 160 PSI • WetSeal Technology - Prevents Run Dry Failure - Isolates Seals from Chemicals and Fertilizers• Maximum Reliability - -FS Model - 316 Stainless Steel - Oversized Bearings - E-coat Corrosion Protection - High Efficiency 4000 PSI Pressure Plated Gear Motor

WetSeal Technology OASIS

WetSeal Technology OASIS PART NUMBERFMCWS-650F-HYDFMCWS-650F-HYD-SIFMCWS-650FS-HYDFMCWS-650F-HYD-LM

MAXGPM170170170

MAXPSI160160160

MAX HYDGPM14.514.514.5


PUMP SEALSOasis WetSeal TechnologyOasis WetSeal TechnologyOasis WetSeal Technology

LIST PRICE$3,082.46$3,331.49$3,929.17 $2,567.79

650 Max Series Hydraulically-Driven Pumps with Oasis WetSeal Technology

Pump less motor for FMCWS-650F-HYD model

PUMPS AC

E PU

MP

S

HYDRAULIC DRIVEN CENTRIFUGAL PUMPS

REF#112

2

3*4

5*6677

8

910*11121213141415

15

PART#BAC-5341120

BAC-12-650-FLG

BAC-12-650-FLG-SS

BAC-4-15040930

30029BAC-26-650-WS

BAC-26-650-WS-SSBAC-16-650-A

BAC-16-650-SS

41107

41316BAC-7-650-WS

411084403944038501505585155850

BAC-14-650-HYD-WS

BAC-14-650-HYD


Pipe plug, stainless steel (-FS model)Volute, NPT & 220 flange x NPT & 200 flange, cast iron

Volute, 220 flange x 200 flange, 316 stainless steel (FS model)

O-ring, volute sealCap screw, 3/8” NC x 3/4” hex head,

stainless steelWasher, 3/8” ID, sealing, stainless steel

Impeller, cast iron, e-coated, wetsealImpeller, stainless steel, wetseal (FS model)

Seal plate, cast iron, e-coatedSeal plate, cast iron, 316 stainless

steel (FS model)Bushing, #8 SAE x 1/4” FNPT, hex,

with o-ringAir valve, 1/4” NPT

Seal, dual seal assembly, Type 21, .750 shaftPlug, #8 SAE, hex head, with o-ring

Bushing, #8 SAE x 1/8” NPTBushing, 1/2” MNPT x 1/8” FNPT (prior to 11/11)

Gauge, pressure, 0-60 PSI, 1/8” NPTGauge, sight, #8 SAE, with float

Gauge, sight, brass, 1/2” NPT (prior to 11/11)Mounting frame, cast iron, e-coated

(effective 3/17 for F models)Mounting frame, cast iron, e-coated (for FS models)

LIST PRICE$.65

$6.46$595.48

$1,111.14

$10.33 $3.23

$2.60 $394.03 $620.82 $542.27 $879.28

$15.52

$19.38 $245.79 $11.02 $37.50 $7.79

$33.57 $60.81

N/A $898.29

$775.39

QTY331

1

21

11111

1

111111111

1

REF#16

171819202122232425262727

2829

303132333435*

*

PART#41907

BAC-42GE-54-660

41943ACAL-32

4087541085

BAC-6-650-HYD-SS-WSBAC-32-650-WS

4341943414

BAC-75-HYD-M16BAC-75-HYD-M16-CD

4270141907

41445BAC-78-10SAEBAC-80-10SAE

41448BAC-79-8

55032RK-FMCWS-650

DESCRIPTIONCap screw, 3/8” NC x 1”, socket head,

stainless steel (seal plated)Cap screw, 3/8” NC x 2” hex head (volute)

Slinger, 1.25” OD x .75” IDSnap ring, internal, mounting frame

Snap ring, external, shaftBearing, FMC-650-models

Key, .188 x .188 x .875Shaft, 11T female spline, stainless steel

Spacer, shaftO-ring, flange, M Series (effective 6/15)

Pad, absorbent, M Series (effective 6/15)Hydraulic motor, pressure plated gear, 14.5 GPM

Hydraulic motor, pressure plated gear, 14.5 GPM, case drain (optional)

Washer, 3/8”, stainless steelCap screw, 3/8” NC x 1”, socket head,

stainless steelO-ring, #10 SAE fitting

Reverse check, #10 SAE male x 1/2” FNPTBody adapter/restrictor, #10 SAE male x 1/2” FNPT

O-ring, restrictor insertRestrictor orifice insert, .125

Barrier fluid, quartRepair kit, includes intems 3 (qty 2), 5, 10

and 35 (1 quart)

LIST PRICE$3.86

$1.90 $7.73 $5.19 $2.60

$57.01 $1.33

$475.12 $51.95 $1.90 $6.46

$1,273.31 $1,247.97

$.70 $3.86

$1.27$36.74 $28.51 $1.27

$14.32 $66.52

$335.56

QTY4

412221111111

22

21111

0.6-

PARTS BREAKDOWN FMCWS-650F(S)-HYD

LIST PRICE CATALOG


SPRAYER

SPECIALTIES


215

215

PUMPS PUMPSA

CE

PU

MP

S

HYDRAULIC DRIVEN CENTRIFUGAL PUMPS750 MAX SERIESFeatures:

• Port Sizes: 300 Series Flange x 220 Series Flange• High Performance Pump - Maximum Flow 290 GPM - Maxium Pressure 150 PSI • WetSeal Technology - Prevents Run Dry Failures - Isolates Seals for Chemicals and Fertilizers• Maximum Reliability - Operates at Lower RPM for Longer Life - Oversized Bearings - E-coat Corrosion Protection - High Efficiency 4000 PSI Pressure Plated Gear Motor

PART NUMBERFMC-750F-HYD-M22FMC-750F-HYD-M25FMC-750F-HYD-M30FMC-750F-HYD-LM

MAXGPM290290290

MAXPSI150150150

MAX HYDGPM

182023


PUMP SEALSOasis WetSeal TechnologyOasis WetSeal TechnologyOasis WetSeal Technology

LIST PRICE$3,962.37$3,962.37$3,962.37 $2,855.56


Pump less motor for FMC-750F-HYD model

REF#1234*556789*10111112131314

PART#BAC-53

BAC-12-750-FLG40397

ACAL-4BAC-26-750-CIBAC-26-750-SS

BAC-16-7504110741316

BAC-7-750V41108440394403850150558515585045267

DESCRIPTIONPipe plug, 1/8” NPT

Volute, 300 X 220 flange, cast iron, e-coatedAcorn nut, 5/8”-11 stainless steel

O-ring, volute sealImpeller, cast iron, e-coated

Impeller, 316 stainless steel (optional)Seal plate, cast iron, e-coated

Plug, #8 SAE X 1/4” FNPT, hex, with o-ringAir valve, 1/4” NPT

Dual seal assembly, Type 21, .875 shaftPlug, #8 SAE, hex head, with o-ring

Bushing, #8 SAE x 1/8” FNPTBushing, 1/2” MNPT x 1/8” FNPT (prior to 11/11)

Pressure gauge, 0-60 PSI, 1/8” NPTSite gauge, #8 SAE, steel

Site gauge, 1/2” NPT, brass (prior to 11/11)Spacer, seal plate

LIST PRICE$.65

$769.06$19.00 $15.52

$595.48 $652.49 $581.54 $15.52 $19.38

$283.80 $11.02 $37.50 $7.79

$33.57 $60.81

N/A$37.50

QTY41121111111111114

REF#15161718

1920212223242526272828293031

32**

PART#42701

BAC-14-750-HYD4095241907

BAC-54-65041943

ACAL-324087541085

BAC-6-750-HYD-SS-WSBAC-32-750

4341943414

BAC-75-HYD-M22BAC-75-HYD-M25

41445BAC-78-10-SAEBAC-80-10SAE

55032RK-FMC-750

DESCRIPTIONWasher, 3/8”, motor mount (2) & volute

Mounting frame, cast iron, e-coatedCap screw, 3/8” NC x 2-1/2”, hex head (volute)

Cap screw, 3/8” NC x 1, socket head, stainless steel (seal plate, motor)

Slinger, 7/8” shaftSnap ring, internal, frameSnap ring, external, shaft

Ball bearing, sealedKey, .188 x .188 x .875

Shaft, 11T female spline, stainless steelSpacer, shaft

O-ring, flange, M series motor (effective 6/15)Pad, absorbent, M series motor (effective 6/15)

Hydraulic motor, pressure plated gear type, 18GPMHydraulic motor, pressure plated gear type, 20GPM

O-ring, #10 SAE fittingReverse check, #10 SAE male x 1/2” NPT female

Body, adapter/restrictor, #10 SAE male x 1/2” NPT female

Barrier fluid, quartRepair kit, includes items 4 (qty 2), 9 and 27 (2 qts.)

LIST PRICE$.70

$969.24 $2.60 $3.86

$5.19$5.19 $2.60

$57.01 $1.33

$570.14 $60.18 $1.90 $6.46

$1,292.32 $1,317.66

$1.27 $36.74 $28.51

$66.52 $447.88

QTY3146

12221111111211

1.32-

PARTS BREAKDOWN FMC-750F-HYD



LIST PRICE CATALOG


SPRAYER

SPECIALTIES


216

216

855 MAX SERIESFeatures:• Port Sizes: 300 Series Flange Inlet and Outlet• High Performance Pump - Maximum Flow 345 GPM - Maxium Pressure 150 PSI • WetSeal Technology - Prevents Run Dry Failure - Isolates Seals from Chemicals and Fertilizers• Maximum Reliability - Operates at Lower RPM - Oversized Bearings - E-coat Corrosion Protection - High Efficiency 4000 PSI Pressure Plated Gear Motor

PUMPS AC

E PU

MP

S

HYDRAULIC DRIVEN CENTRIFUGAL PUMPS

PART NUMBERFMC-855F-HYD

MAXGPM345

MAXPSI150

MAX HYDGPM

23PORT SIZES

300 x 300 Universal FlangePUMP SEALS

Oasis WetSeal TechnologyLIST PRICE$7,520.75


REF#123*456789*

10*11121314151617181920212223242526272829*

*

PART#20750

BAC-12-855F4001840397

BAC-26-855-CIBAC-16-855

4110741316

BAC-4-150BAC-7-850V

BAC-14-855-HYD409534190841108440395015055851GE-54419454087641085

BAC-6-850-HYD-SS408774341943414

BAC-75-HYD-M30427014190755032

RK-FMC-855

DESCRIPTIONPipe plug, 1/4” NPT

Volute, 300 X 300 flange, cast iron, e-coatedO-ring, volute seal

Nut, acorn, 5/8”-11, stainless steelImpeller, cast iron, e-coated

Seal plate, cast iron, e-coatedBushing, #8 SAE x 1/4” FNPT, with o-ring

Air valve, 1/4” NPTO-ring; seal plate to frame

Seal assembly, 1-1/4” type 21 double, carbon/ceramic/Viton®Mounting frame, cast iron, e-coated

Cap screw, 3/8” NC x 2-1/4” hex headCap screw, seal plate, 3/8” NC x 3/4” socket head, stainless steel

Plug, #8 SAE, hex headBushing, #8 SAE x 1/8” FNPT, with o-ring

Pressure gauge, 0-60 PSI, 1/8” NPTSight gauge

SlingerSnap ring, external

Bearing, frontKey, 3/16” x 3/16” x 7/8”, impeller

Shaft, female 11T spline, stainless steelBearing, rear

O-ring, flange, M series motor (effective 6/15)Pad, absorbent, M series motor (effective 6/15)

Hydraulic motor, pressure plated gear type, case drainWasher, 3/8” stainless steel

Cap screw, motor, 3/8” NC x 1” socket headBarrier fluid, quart

Repair kit, includes item 3, 9, 10, and 29 (2 quarts)

LIST PRICE$7.60

$2,502.28$19.00$19.00

$1,133.94 $1,144.08

$15.52 $19.38 $10.33

$400.36 $1,970.15

$2.60 $3.86 $11.02 $37.50 $33.57 $60.81 $5.19 $5.19 $57.01 $1.33

$658.83 $70.95 $1.90 $6.46

$1,344.26 $.70 $3.86 $66.52

$581.73

QTY41111111111841111141111111222-

PARTS BREAKDOWN FMC-855F-HYD



LIST PRICE CATALOG


SPRAYER

SPECIALTIES


217

217

Documents

FLOW LIMITER VALVEsprayers.com/2020Catalog/ace-hydraulic-pump.pdf · PUMPS ACE PUMPS HYDRAULIC DRIVEN CENTRIFUGAL PUMPS. GEMINI DUAL PUMP KIT. PART NUMBER. DPK DPK-EXT. DESCRIPTION