Floor stand assembly w/handwheel operator - Kennedy Valve … · 2013-07-12 · KENNEDY VALVE Kennedy Valve/Floorstands 12-1 Floor stand assembly w/handwheel operator The F-5500-T

KENNEDY VALVE

Kennedy Valve/Floorstands 12-1

Floor stand assemblyw/handwheel operator

The F-5500-T Floor stand is for use on non-rising stem valves. Floor stands are of high strength ductile iron and may be provided with extension arms of steel, stainless steel or bronze as specified.

Updated 02/03/12

daniel.burczynski

Floor Stand

KENNEDY VALVE

12-2 Kennedy Valve/Floorstands

non-rising uniVersalindicating Floor stand

The F-5500-T indicating floor stand is for use on non-rising stem valves where open/close valve indication is needed. Floor stands are of high strength ductile iron and may be provided with extension arms of steel, stainless steel or bronze as specified.

item description req'd. mat'l.

1 FLOOR STAND 1 D.I. 2 STEM 1 ST'L 3 COUPLING 1 C.I. 4 BOLT 1 ST'L 5 NUT 1 ST'L 6 BUSHING 1 BRZ 7 INDICATOR NUT 1 BRZ 8 CLOSED TAG 1 ALUM 9 DRIVE SCREW 1 ST'L

Updated 02/03/12

KENNEDY VALVE






Updated 02/03/12

KENNEDY VALVE






Updated 02/03/12

KENNEDY VALVE


extension stem assembly2 " sq. socKet coupling

extension stemsValve extension stems are available in steel, or bronze and are provided with a 2" square nut or handwheel as specified.

Extension stems are available for use with Mud valves, gate valves, Butterfly valves, etc.

All components are jig drilled for interchangeability.

When ordering extenstion stem state length and give distance from bottom face of flange to top of handwheel or nut, or to base of floor stand.

Updated 02/03/12

daniel.burczynski

Ext Stem

KENNEDY VALVE


size 3, 5 & 6 stem guidegeneral dimensions

dimensions

siZe 3 5 6

A 2 1/2 15 24 B 17 24 35

Updated 02/03/12

daniel.burczynski

Stem Guide

KENNEDY VALVE


size 3, 5 & 6 stem guidesparts list

the F-5660-t stem guidesStem Guides are installed as wall brackets to support extension arms. They are fully adjustable and are made of high strength ductile iron. The guide is bronze bushed where the extension stem passes through. They should be installed at a height which does not permit the stem to be unsupported through a length or more that 10 feet.

Stem Guides are available in three sizes. When ordering state distance from center line of operating stem to face of wall, or give the size as shown

item description qty. material

1 BRACKET 1 DUCTILE IRON 65.45.12 MIN. 2 GUIDE 1 DUCTILE IRON 65.45.12 MIN. 3 BUSHING 1 BRASS CDA 360 ASSEMBLY BOLTS & NUTS 4 EA. PLATED STEEL

Updated 02/03/12

KENNEDY VALVE


Floor box - parts listand dimensions

F5695-t Floor boxFloor boxes are designed for use with non-rising stem valves. Installed in concrete floors or slabs they provide support for the extension stem and a cover for the operating nut on the stem. Available in 8", 10", and 12" lengths.

item description qty. material

1 BODY 1 CAST IRON A126B 2 COVER 1 CAST IRON A126B 3 BUSHING 1 BRASS CDA 360

Updated 02/03/12

KENNEDY VALVE


chain wheeldimensions

F-5680 chain wheelsChain wheels are normally used for operation of valves located overhead. They are provided with chain guides to prevent the chain from slipping off the wheel. Chains can be furnished rust proof if specified. Chain wheels are mounted directly on the handwheel, and are of approximately the same diameter.

In ordering please state the distance from floor to center line of wheel, or give the exact number of feet of chain required.

Sprocket Size 1 1/2 2 2 1/2 3 3 1/2 4 4 1/2 5

A - Overall height 8 10 1/2 12 1/2 15 1/2 18 1/2 21 1/2 25 1/2 30

b - Inner Bolt Circle 3 1/2 4 1/2 5 1/2 8 1/2 12 12 16 19

c - Outer Bolt Circle 5 6 5/8 9 1/4 12 3/8 15 1/2 18 22 25 1/2

d - Hub Opening (dia.) 1 2 1/8 2 1/8 2 1/8 3 3 3 3

E - Slot Size (width) 3/8 3/8 7/16 7/16 7/16 5/8 5/8 5/8

F - Rear Opening 1 7/8 3 1/8 3 1/2 3 1/2 4 7/8 4 7/8 4 3/4 4 3/7

G - Hub Depth (shoulder to rear) 1 7/16 1 3/8 1 7/8 1 7/8 1 7/8 1 7/8 1 7/8 2

H - Rim Thickness 1 1/8 1 1/8 1 1/4 1 1/4 1 1/4 1 1/2 1 1/2 1 5/8

J - Overall Depth 2 3/8 2 3/8 2 5/8 2 5/8 3 1/8 3 1/8 318 3 1/8

specifications

Diameter Chain of sprocket Diameter of weight Size wheel Weight valve wheels per 100' No. in inches in lbs. rim will fit in lbs.

1 1/2 7 1/2 5 6 to 7 1/2 17 1/2

2 9 8 7 1/2 to 9 17 1/2

2 1/2 12 1/2 14 9 1/4 to 12 1/2 30

3 15 1/2 19 12 3/4 to 15 1/2 30

3 1/2 19 28 15 3/4 to 19 30

4 22 37 19 1/4 to 22 35

4 1/2 26 47 22 1/4 to 26 35

5 30 58 26 1/4 to 30 35

Note: Furnished with Rust-Proof Lock Link Steel Chain

Updated 02/03/12

Returning Home withTHe Kennedy K81V VinTage HydRanT

Kennedy Valve

Kennedy Valve

PROUDLY

MADE IN THE USA

4

A Division of McWAne, inc.www.kennedyvalve.com

1021 e. Water street • elmira, new York 14901P.o. Box 981

Phone: (607) 734-2211 • fAx: 1-800-952-4771

➤ The 5¼ Main Valve Opening Kennedy Vintage Hydrant is a modernized replica of the original Kennedy “Cage” Hydrant.

➤ Shares all the same components as the current K81D Guardian Fire Hydrant. Existing Guardian Hydrants can be retrofitted with Vintage Upper and Bonnet Castings.

➤ Vintage Hydrants are manufactured with standard Guardian K-81D internal parts: no need for special tools. The Vintage hydrant can be maintained with parts and kits already in your inventory.

➤ Durable Heat Fused Polyester Coating. Red Upper and White Caps as a standard. Color variations available.

➤ Nostalgic look. Great for locations where you want your hydrants to have Pizzazz!

Sometimes things are better left alone. If you long for the nostalgic style of past eras with modernized funcionality, the VINTAGE hydrant is just what you are looking for.

The vinTAGe hydrant meets or exceeds all requirements

of AWWA c-502.

20 10

Updated 02/03/12

Documents

Floor stand assembly w/handwheel operator - Kennedy Valve … · 2013-07-12 · KENNEDY VALVE Kennedy Valve/Floorstands 12-1 Floor stand assembly w/handwheel operator The F-5500-T