Flashcards 02 70-680

Embed Size (px)

Citation preview

  • 8/12/2019 Flashcards 02 70-680

    1/24

    Answer:In Device Manager, choose Update Driver on the Driver tab inthe Properties window of the driver

    Objective:Configuring Hardware and Applications

    Item: 106

    Which VPN tunnel type uses machine authentication viaAnswer:VPN ReconnectIKEv2?

    Objective:Configuring Mobile Computing

    Item: 107How can you ensure certain PXE-enabled computers retrieveimages only from a particular WDS server?

    Answer:Prestage the client

    Objective:

    Deploying Windows 7Item: 108What are the three default power plans included with Windows7?

    Answer:Balanced, Power Saver, and High Performance

    Objective:Configuring Mobile Computing

    Item: 109Which ImageX switch will add a volume image to an existingimage file?

    Answer:/append

    Objective:Deploying Windows 7

    Item: 110What is the problem with using an APIPA address tocommunicate with stations on a different subnet?

    Answer:An APIPA address does not give the computer a defaultgateway

    Objective:Configuring Network Connectivity

    Item: 111What file can you use to have Windows scripts make

    modifications after Windows Setup completes?Answer:the %WINDIR%\Setup\Scripts\SetupComplete.cmd file

    Objective:Deploying Windows 7

    Item: 112Besides update history in Windows Updates, where else canyou find a record of Windows updates applied to yourcomputer?

  • 8/12/2019 Flashcards 02 70-680

    2/24

    Answer:In the system log, in the ReportingEvents.log file and in theWindowsUpdate.log file.

    Objective:Monitoring and Maintaining Systems that Run Windows 7

    Item: 113

    How would you apply an application control rule only tocomputers in an Organizational Unit?

    Answer:Create an application control rule in a GPO and link the GPOto the OU.

    Objective:Configuring Hardware and Applications

    Item: 114What service provides Windows backup and restorecapabilities?

    Answer:Windows Backup

    Objective:Configuring Backup and Recovery OptionsItem: 115What can you configure in Internet Explorer 8 to preventhistory, cookies, and temporary Internet files from being storedfrom your recent session?

    Answer:Turn on InPrivate Browsing

    Objective:Configuring Hardware and Applications

    Item: 116What file system types are supported on Windows 7?

    Answer:FAT, FAT32, ExFAT, and NTFS

    Objective:Deploying Windows 7

    Item: 117How do you save credentials that are stored on your computerto different media?

    Answer:Use the Back up Vault option in Credential Manager to storecredentials to another disk or location.

    Objective:Configuring Access to Resources

    Item: 118What should you install on a Windows 7 computer so that youcan manage a Windows Server 2008 or Core Edition server?

    Answer:Remote Server Administration Tools (RSAT) for Windows 7

    Objective:Configuring Access to Resources

    Item: 119VPN reconnect uses which two types of authentication viaIKEv2?

  • 8/12/2019 Flashcards 02 70-680

    3/24

    Answer:User authentication or machine authentication

    Objective:Configuring Mobile Computing

    Item: 120What utility can you use to troubleshoot device drivers on a

    Windows 7 computer?Answer:The Driver Verifier tool, verifier.exe

    Objective:Configuring Hardware and Applications

    Item: 121What User Account Control (UAC) setting will allow a user toset the most secure desktop?

    Answer:the Always notify me when: option.

    Objective:Configuring Access to Resources

    Item: 122What command can you run at your computer to request anIPv6 address from a DHCP server?

    Answer:Issue ipconfig /renew6

    Objective:Configuring Network Connectivity

    Item: 123What utility can be used to add updates to a Windows ImageOffline such as device drivers, language packs, and softwareupdates?

    Answer:Windows System Image Manager (SIM)

    Objective:Deploying Windows 7

    Item: 124Who has the ability to change the Windows Update settingslocally on a Windows 7 computer?

    Answer:a user in the Administrators group

    Objective:Monitoring and Maintaining Systems that Run Windows 7

    Item: 125Which option with ImageX allows you to specify a path otherthan the %TEMP% variable to store temporary files?

    Answer:/temp

    Objective:Installing, Upgrading, and Migrating to Windows 7

    Item: 126How can you prevent users from copying network informationto a writeable CD/DVD?

    Answer:

  • 8/12/2019 Flashcards 02 70-680

    4/24

  • 8/12/2019 Flashcards 02 70-680

    5/24

    Objective:Configuring Hardware and Applications

    Item: 133How do you ensure that a program has a screen resolution of640 x 480 every time a user runs the program?

    Answer:

    Set the Run in 640 x 480 screen resolution option on theCompatibility tab of the program's Properties window

    Objective:Configuring Hardware and Applications

    Item: 134Which DISM switch can you use to install the RemoteAdministration Tools on an offline Windows 7 image?

    Answer:/Enable-Feature

    Objective:Deploying Windows 7

    Item: 135

    Which wireless security type will use the encryption type ofAES without a user key?

    Answer:WPA2-Enterprise

    Objective:Configuring Network Connectivity

    Item: 136What installation option should you choose if you want yourWindows Vista laptop to keep its settings and files when youinstall Windows 7?

    Answer:Upgrade

    Objective:Installing, Upgrading, and Migrating to Windows 7

    Item: 137How should you specify a Windows 7 computer to pullWindows updates from a specific WSUS server?

    Answer:Set the\Computer Configuration\AdministrativeTemplates\Windows Components\WindowsUpdate\Specify intranet Microsoft Update service locationsetting in a local security policy or group policy object.

    Objective:Monitoring and Maintaining Systems that Run Windows 7

    Item: 138

    How do you delete all but the most recent system restorepoint?

    Answer:Open the System applet in Control Panel. Choose the SystemProtection tab, find System Restore and ShadowCopies, select Clean Up.

    Objective:Configuring Backup and Recovery Options

    Item: 139

  • 8/12/2019 Flashcards 02 70-680

    6/24

    What must you have enabled in the network properties of anadapter on a Windows 7 client computer to use DirectAccess?

    Answer:IPv6 must be enabled and configured

    Objective:Configuring Mobile Computing

    Item: 140Which option with ImageX allows you to log all events so youcan diagnose problems?

    Answer:/logfile

    Objective:Installing, Upgrading, and Migrating to Windows 7

    Item: 141Which file is called by ScanState to control which applicationsettings are migrated?

    Answer:MigApp.xml

    Objective:Installing, Upgrading, and Migrating to Windows 7Item: 142To create media that contains the discover image to be usedby non-PXE computers to receive an image from a WDSserver, what must you install?

    Answer:install the Windows Automated Installation Toolkit (AIK) tocreate media that contains the discover image.

    Objective:Deploying Windows 7

    Item: 143What utilities can you use to shrink a volume?

    Answer:DiskPart issued from the command line and Disk Managementissued from the GUI

    Objective:Monitoring and Maintaining Systems that Run Windows 7

    Item: 144Which file should you copy to a USB device to automate theinstallation of Windows 7 by booting the Windows 7 DVD?

    Answer:Autounattend.xml

    Objective:Installing, Upgrading, and Migrating to Windows 7

    Item: 145How do you run a Windows Memory Diagnostic test on yourcomputer?

    Answer:Boot a Windows Installation disk or System Repair disk,access the System Recovery options, and choose WindowsMemory Diagnostic

    Objective:Configuring Backup and Recovery Options

  • 8/12/2019 Flashcards 02 70-680

    7/24

    Item: 146What ports have to open on a BranchCache client's firewall if itis configured in Distributed Cache mode?

    Answer:TCP Port 80 and UDP port 3072

    Objective:

    Configuring Access to ResourcesItem: 147What is the executable file that you can use to manage aWSUS server?

    Answer:WSUSutil.exe

    Objective:Configuring Access to Resources

    Item: 148What folder does the User State Migration Tool (USMT) use asa source for existing documents and accounts that will betransferred over to a new Windows 7 installation?

    Answer:\WINDOWS.OLDObjective:Installing, Upgrading, and Migrating to Windows 7

    Item: 149What command can you type on a BranchCache client todisplay the status of the client?

    Answer:netsh branchcache show status all

    Objective:Configuring Access to Resources

    Item: 150How do you allow only certain users to have a secureconnection with an application that uses TCP port 9999?

    Answer:Create a rule in Windows Firewall with Advanced Security

    Objective:Configuring Network Connectivity

    Item: 151What are three reasons why you cannot find previous versionsof a file?

    Answer:_ The file may not have changed_ A backup or restore point may not have been madesince the file was changed

    _ System protection might not be turned on for the drivethat contains the files

    Objective:Configuring Backup and Recovery Options

    Item: 152How can you add a data recovery agent to your Windows 7computer?

    Answer:Add the data recovery agent in Group Policy

  • 8/12/2019 Flashcards 02 70-680

    8/24

    Objective:Configuring Access to Resources

    Item: 153When booting from a Windows 7 DVD, where will the WindowsSetup process search for a file named Autounattend.xml?

    Answer:

    in the root directory of all removable media, such as a USBdrive or floppy drive

    Objective:Installing, Upgrading, and Migrating to Windows 7

    Item: 154What utility is used to create a Windows 7 image from areference computer?

    Answer:ImageX

    Objective:Installing, Upgrading, and Migrating to Windows 7

    Item: 155

    What switch is used with slmgr.vbs to retrieve licenseinformation and the current KMS activation count from the KMShost?

    Answer:slmgr.vbs /dlv

    Objective:Deploying Windows 7

    Item: 156How can a user run command-line utilities such as Defrag,Chkdsk, and IPConfig in Windows 7 with the securitycredentials of a specific administrative user?

    Answer:use the RUNAS command

    Objective:Configuring Access to Resources

    Item: 157Where do you turn on presentation settings on a Windows 7laptop?

    Answer:Open Windows Mobility Center. On the PresentationSettings tile, click Turn on.

    Objective:Configuring Hardware and Applications

    Item: 158What type of VPN tunnel can allow an application to stay

    connected to an application server even if the client's IPaddress changes?

    Answer:IKEv2

    Objective:Configuring Mobile Computing

    Item: 159On which tab on the System Configuration utility should youprevent programs from starting when you log in to your

  • 8/12/2019 Flashcards 02 70-680

    9/24

    Windows 7 computer?

    Answer:Startup

    Objective:Configuring Hardware and Applications

    Item: 160

    What printer permission allows a user to manage other user'sprint jobs?

    Answer:Manage Documents

    Objective:Configuring Access to Resources

    Item: 161How can you revert to a previous version of a device driver inWindows 7?

    Answer:Choose Roll Back Driver in Device Manager

    Objective:

    Configuring Backup and Recovery OptionsItem: 162How many partitions do you need on a portable computerrunning Windows 7 to support BitLocker encryption of the

    Answer:at least two partitionsvolume that contains the Windows operating system?

    Objective:Configuring Mobile Computing

    Item: 163What should you do to get a program to work in Windows 7 ifthe program worked in a previous version of the Windowsoperating system?

    Answer:Set the compatibility mode for the appropriate operatingsystem for the program on the Compatibility tab of theprogram's Properties window.

    Objective:Configuring Hardware and Applications

    Item: 164If your computer is running Windows XP, then what operatingsystem should you upgrade to before upgrading to Windows 7?

    Answer:Windows Vista SP1

    Objective:

    Installing, Upgrading, and Migrating to Windows 7Item: 165What BCDedit command sets the maximum time to 5 secondsfor a user to select an operating system from the boot menulist?

    Answer:bcdedit /timeout 5

    Objective:Installing, Upgrading, and Migrating to Windows 7

  • 8/12/2019 Flashcards 02 70-680

    10/24

    Item: 166How can Windows 7 computers be added to a homegroup?

    Answer:Open HomeGroup in Control Panel and type in the passwordfor the homegroup

    Objective:

    Configuring Access to ResourcesItem: 167Why should you not back up files to another volume on thesame physical disk?

    Answer:If the disk fails, you lose the volume that contains your backup

    Objective:Configuring Backup and Recovery Options

    Item: 168Which power plan has the Turn the display off settingconfigured for 10 minutes?

    Answer:

    BalancedObjective:Configuring Mobile Computing

    Item: 169What BCDedit command will display a legacy operating systemsuch as Windows XP as the default option on the boot menulist?

    Answer:bcdedit /displayorder {ntldr} /addfirst

    Objective:Installing, Upgrading, and Migrating to Windows 7

    Item: 170What two utilities can you use to export IPSec settings andfirewall rules to another computer?

    Answer:Windows Advanced Firewall and the Netsh AdvFirewallcommand

    Objective:Configuring Network Connectivity

    Item: 171What policy should you enable in a GPO to audit each instanceof a user exercising a user right?

    Answer:Enable Audit privilege use access under Audit Policy

    Objective:Monitoring and Maintaining Systems that Run Windows 7Item: 172What feature in Windows 7 automatically changes your defaultprinter when you change networks?

    Answer:Location-aware printing

    Objective:Configuring Network Connectivity

  • 8/12/2019 Flashcards 02 70-680

    11/24

    Item: 173What is the benefit of using Windows Anytime Upgrade?

    Answer:You can upgrade from a Windows 7 edition to anotherWindows 7 edition in a few minutes by purchasing an upgradekey because the software that you need is preinstalled with

    Windows 7.Objective:Deploying Windows 7

    Item: 174How can you prevent users from copying network informationto a USB device that is not encrypted?

    Answer:Enable the Deny write access to drives not protected byBitLocker setting located in ComputerConfiguration\Administrative Templates\WindowsComponents\BitLocker Drive Encryption\Removable DataDrives in the local security policy or a group policy object.

    Objective:Monitoring and Maintaining Systems that Run Windows 7

    Item: 175What feature of Windows 7 Enterprise and Ultimate editionsallows you to encrypt a USB device?

    Answer:BitLocker to Go

    Objective:Configuring Mobile Computing

    Item: 176What command-line utility can you use to create a VHD?

    Answer:DiskPart

    Objective:Deploying Windows 7

    Item: 177What type of migration is used run ScanState on a sourcecomputer and LoadState on a destination computer?

    Answer:Side-by-Side Migration

    Objective:Installing, Upgrading, and Migrating to Windows 7

    Item: 178 Answer:Where can you remove a recent program that has beeninstalled on a Windows 7 computer?

    Control Panel > Programs and FeaturesObjective:Monitoring and Maintaining Systems that Run Windows 7

    Item: 179What prefix is used by IPv6 for a global unicast address?

    Answer:2000::/3

    Objective:Configuring Network Connectivity

  • 8/12/2019 Flashcards 02 70-680

    12/24

    Item: 180What script from the Windows Automated Installation Kit isused to split Setup files, including Windows image (.wim) files,into individual parts that you can later burn onto multiple CDROMsfor installation on a computer that lacks a DVD drive?

    Answer:

    createspannedshares.cmdObjective:Deploying Windows 7

    Item: 181What type of AppLocker rule would you apply to restrict usersto running a specific version of a program?

    Answer:File Hash rule

    Objective:Configuring Hardware and Applications

    Item: 182When performing an upgrade, why would you use the User

    State Migration Tool (USMT) instead of the Easy TransferWizard to transfer files?

    Answer:You would use USMT to transfer accounts and files from the\WINDOWS.OLD directory after you have installed Windows 7on the computer.

    Objective:Installing, Upgrading, and Migrating to Windows 7

    Item: 183Why would you get an access denied message when you try toopen an encrypted file?

    Answer:the key that was used to encrypt the file is probably not on your

    computerObjective:Configuring Access to Resources

    Item: 184What sequence of commands in DiskPart will allow you toremove an existing .vhd file as a disk in Windows 7?

    Answer:SELECT VDISK FILE="FILE NAME"

    DETACH VDISK

    Objective:Deploying Windows 7

    Item: 185

    How do you know if your web browser is using InPrivateBrowsing?

    Answer:It will display InPrivate on the address bar.

    Objective:Configuring Hardware and Applications

    Item: 186 Answer:What must you specify in an inbound rule in Windows Firewallwith Advanced Security to set Only allow connections from

  • 8/12/2019 Flashcards 02 70-680

    13/24

    these users?You must set Allow only secure connections.

    Objective:Configuring Network Connectivity

    Item: 187What service pack must be installed on a Windows Vista

    computer before upgrading to Windows 7?Answer:at least Service Pack 1

    Objective:Installing, Upgrading, and Migrating to Windows 7

    Item: 188What is the path in a GPO to the Windows Support AdvancedAudit Policy Configuration?

    Answer:Computer Configuration\Windows Settings\SecuritySettings\Advanced Audit Policy Configuration

    Objective:

    Configuring Mobile ComputingItem: 189What possible IP address will a Windows 7 computer have ifyou install it on a network with no DHCP server?

    Answer:169.254.0.1 to 169.254.255.254

    Objective:Configuring Network Connectivity

    Item: 190Which Sysprep switch would you use to prepare the computerfor delivery to the customer?

    Answer:/oobe

    Objective:Deploying Windows 7

    Item: 191What must you do to allow single sign-on (SSO) for a Web sitein Credential Manager?

    Answer:Add the URL of the Web site with your username andpassword

    Objective:Configuring Access to Resources

    Item: 192What utility can you use to enable a feature on an offline

    image?Answer:DISM

    Objective:Deploying Windows 7

    Item: 193How can you prevent users from copying network informationto a USB device?

    Answer:

  • 8/12/2019 Flashcards 02 70-680

    14/24

  • 8/12/2019 Flashcards 02 70-680

    15/24

    What netsh command can be used to allow a Windows 7computer that uses DirectAccess as a client to a Teredoserver?

    Answer:netsh interface ipv6 set teredo

    enterpriseclient Objective:Configuring Mobile Computing

    Item: 201How should you fix the error Bootmgr is missing pressCTRL-ALT-DEL?

    Answer:Boot a Windows Installation disk or System Repair disk,access the System Recovery options, and choose StartupRepair

    Objective:Configuring Backup and Recovery Options

    Item: 202Which ScanState parameter should you use to copy encryptedfiles?

    Answer:/efs:copyraw

    Objective:Installing, Upgrading, and Migrating to Windows 7

    Item: 203What should you do to move a certificate from one computer toa new computer running Windows 7?

    Answer:Export the certificate from the source computer and import thecertificate to the computer running Windows 7.

    Objective:Configuring Hardware and Applications

    Item: 204What command-line command will defrag all volumes on yourcomputer and show defragmentation statistics?

    Answer:Defrag /C /V

    Objective:Monitoring and Maintaining Systems that Run Windows 7

    Item: 205Where should you store credentials that you have backed upfrom Credential Manager?

    Answer:on removable mediaObjective:Configuring Access to Resources

    Item: 206What should you use to remove a credential for a user namedPat after you used the RUNAS command with Pat's account?

    Answer:Use Credential Manager

  • 8/12/2019 Flashcards 02 70-680

    16/24

    Objective:Configuring Access to Resources

    Item: 207How do you delete all system restore points?

    Answer:On the System Protection tab of the system Properties menu

    choose Configure and then choose DeleteObjective:Configuring Backup and Recovery Options

    Item: 208How do you revert to the last known good configuration of yourcomputer with Windows 7?

    Answer:Press [F8] on start up.

    Objective:Configuring Backup and Recovery Options

    Item: 209What three things must you do to enable BranchCache on

    client computers?Answer:1. Turn on BranchCache2. Enable either Hosted Cache mode or Distributed Cachemode3. Configure the client firewall to enable BranchCacheprotocols

    Objective:Configuring Access to Resources

    Item: 210When BitLocker is used with data drives, which file systemscan the drive be formatted with?

    Answer:exFAT, FAT16, FAT32, or NTFS file systems

    Objective:Configuring Mobile Computing

    Item: 211What service must be started before attempting a backup inWindows 7?

    Answer:Task Scheduler service

    Objective:Configuring Backup and Recovery Options

    Item: 212To which drive should you back up files and directories from a

    Windows 7 computer?Answer:On a separate external drive

    Objective:Configuring Backup and Recovery Options

    Item: 213Which RAID level provides fault tolerance and improves readaccess?

    Answer:

  • 8/12/2019 Flashcards 02 70-680

    17/24

    RAID-5

    Objective:Monitoring and Maintaining Systems that Run Windows 7

    Item: 214What directory contains a previous version of a Windowsoperating system after a custom installation?

    Answer:the\Windows.old directory

    Objective:Deploying Windows 7

    Item: 215How can you prevent web content providers from collectinginformation from your web browser on a Windows 7 computer?

    Answer:Configure InPrivate Filtering

    Objective:Configuring Hardware and Applications

    Item: 216

    In a wipe-and-load migration, at what point do you installMicrosoft Office 2007 or any proprietary applications on thedestination computer?

    Answer:After you have installed the Windows operating system andbefore you run LoadState.

    Objective:Installing, Upgrading, and Migrating to Windows 7

    Item: 217What utility would you use to apply an image to a VHD?

    Answer:ImageX

    Objective:Deploying Windows 7

    Item: 218Why does voice application stay connected when you changeaccess points using an IKEv2 tunnel with VPN Reconnect?

    Answer:VPN Reconnect maintains the client internal IP address so thatit stays the same even if the Origin address changes

    Objective:Configuring Mobile Computing

    Item: 219How do you block Windows Media Player Network SharingService on employees' portable computers while used in

    the office and allow the Service when the computers areused outside of the office?

    Answer:Use Windows Firewall to block the Windows Media PlayerNetwork Sharing Service on the Home/Work network profile,and allow the service on the Public network profile.

    Objective:Configuring Network Connectivity

    Item: 220

  • 8/12/2019 Flashcards 02 70-680

    18/24

    What command can be used to run command line commandremotely on another computer from your Windows 7 computer?

    Answer:winrm

    Objective:Configuring Access to Resources

    Item: 221What utility can be used to update an answer file and validatethe settings of the file against the .wim file?

    Answer:Windows System Image Manager (SIM)

    Objective:Deploying Windows 7

    Item: 222In order to use the WinRM listener on a Windows Vista,Windows 7, or Windows Server 2008 computer, what must beconfigured on the computer?

    Answer:

    An exception for the WinRM service on the appropriatenetwork connection type

    Objective:Configuring Network Connectivity

    Item: 223What PowerShell command is used to copy a file?

    Answer:Copy-Item

    Objective:Configuring Network Connectivity

    Item: 224Which operating systems support Windows Support AdvancedAudit Policy Configuration?

    Answer:Windows 7 and Windows Server 2008 R2

    Objective:Configuring Mobile Computing

    Item: 225What hotkey sequence will open task manager?

    Answer:Ctrl+Shift+Esc

    Objective:Deploying Windows 7

    Item: 226How do you delete a VHD in the Disk Management snap-in?

    Answer:Right-click the disk and choose Detach VHD.

    Objective:Deploying Windows 7

    Item: 227How can you easily create an IPsec tunneling rule between twoWindows 7 computers?

    Answer:

  • 8/12/2019 Flashcards 02 70-680

    19/24

    Create a Connection Security Rule in Windows Firewall withAdvanced Security

    Objective:Configuring Network Connectivity

    Item: 228What command-line utility can you use to reduce the space

    that shadow copies take up on a disk?Answer:VSSAdmin

    Objective:Configuring Backup and Recovery Options

    Item: 229What utility would you use to add a driver to an offline WindowsPE image?

    Answer:PEImg.exe

    Objective:Deploying Windows 7

    Item: 230Before you can synchronize information between a WindowsMobile 6.1 device and your computer, what must you establishbetween the device and the computer?

    Answer:Windows Mobile partnership

    Objective:Configuring Mobile Computing

    Item: 231How do you give an individual user the ability to back up files,but not to restore them?

    Answer:Give the user the right to Back up files and directories in a

    local security policy or Group Policy

    Objective:Configuring Backup and Recovery Options

    Item: 232When should you choose Custom in the Installation optionswhen performing a Windows 7 installation?

    Answer:When you do not want to keep your existing files, settings, andprograms

    Objective:Installing, Upgrading, and Migrating to Windows 7

    Item: 233

    What option should you select in the System RecoveryAnswer:System Image Recoveryoptions to restore personal data after booting with a systemrepair disc?

    Objective:Configuring Backup and Recovery Options

    Item: 234Why would you receive the following error when attempting to

  • 8/12/2019 Flashcards 02 70-680

    20/24

    edit the HOSTS file?Access to C:\Windows\System32\drivers\etc\

    hosts was denied

    Answer:You must open the Notepad application with the permissions ofan administrator

    Objective:Configuring Access to ResourcesItem: 235What GPO policy setting can be used to allow a Windows 7computer that uses DirectAccess as a client to a Teredoserver?

    Answer:Computer Configuration| Policies\ AdministrativeTemplates\ Network\ TCPIP Settings\ Ipv6 transitionTechnologies\ Teredo State=Enterprise Client

    Objective:Configuring Mobile Computing

    Item: 236What type of client boots to the network to connect to aWindows Deployment Services (WDS) server and install aWindows 7 image?

    Answer:PXE-enabled clients

    Objective:Installing, Upgrading, and Migrating to Windows 7

    Item: 237How do you allow a computer running Windows 7 tocommunicate with another server on the same subnet after youhave changed the IP address of the server?

    Answer:

    run ipconfig /flushdns on the computerObjective:Configuring Network Connectivity

    Item: 238What command is used to produce the Power EfficiencyDiagnostic Report report?

    Answer:PowerCfg -Energy

    Objective:Configuring Mobile Computing

    Item: 239How can you create another volume on a partition on a disk

    that contains volumes and no leftover space?Answer:Shrink a volume to free up space and create a partition.

    Objective:Monitoring and Maintaining Systems that Run Windows 7

    Item: 240What utility would you use to add a driver to a booted WindowsPE image?

    Answer:

  • 8/12/2019 Flashcards 02 70-680

    21/24

    Drvload.exe

    Objective:Deploying Windows 7

    Item: 241Besides the Administrators group, what local group on aWindows 7 computer has the ability to restore files?

    Answer:the Backup Operators group

    Objective:Configuring Backup and Recovery Options

    Item: 242What must you do to open an encrypted file that wastransferred from another computer?

    Answer:Export the EFS certificate from the source computer and importthe EFS certificate to the target computer

    Objective:Configuring Access to Resources

    Item: 243To have the highest data transfer performance possible, whatshould you configure on the properties of the device?

    Answer:Configure Enable write caching on the device and Turn offWindows write-cache buffer flushing on the device

    Objective:Monitoring and Maintaining Systems that Run Windows 7

    Item: 244What file on the Windows 7 DVD is used to start the EasyTransfer Wizard?

    Answer:The migsetup.exe file in the\Support\Migwiz directory DVD

    Objective:Installing, Upgrading, and Migrating to Windows 7

    Item: 245What must you configure on a client to allow the client to useapplications on a Remote Desktop Web Access server in aremote location?

    Answer:The connection URL in the RemoteApp and DesktopConnections applet in Control Panel

    Objective:Configuring Mobile Computing

    Item: 246

    Which Sysprep switch enables you to automate the mini-setupwizard so the computer name and other information canautomatically be prepared?

    Answer:/unattend

    Objective:Deploying Windows 7

    Item: 247What switch is used with the PING command to allow you to

  • 8/12/2019 Flashcards 02 70-680

    22/24

    ping a computer by its IPv6 address?

    Answer:ping -6

    Objective:Configuring Network Connectivity

    Item: 248

    What must be turned on to view, copy, or restore previousversions of files?

    Answer:System Protection must be turned on

    Objective:Configuring Backup and Recovery Options

    Item: 249What must you do if you want to install Windows 7 from a VHDon a new disk installed in a computer?

    Answer:Set the disk partition to Active

    Objective:

    Deploying Windows 7Item: 250What should you use to validate an answer file for a Windows7 installation that you have manually authored?

    Answer:Windows System Image Manager (SIM)

    Objective:Deploying Windows 7

    Item: 251How can you connect from the command line to a wirelessnetwork with the SSID verigon and a profile named profile1?

    Answer:netsh wlan connect ssid="Verigon"

    name=Profile1 interface="Wireless Network

    Connection"

    Objective:Configuring Network Connectivity

    Item: 252What Deployment Image Servicing and Management (DISM)switch can be used to add a product key to a Windows 7image?

    Answer:/Set-ProductKey

    Objective:Deploying Windows 7

    Item: 253What are the four VPN tunnel types supported by Windows 7?

    Answer:PPTP, L2TP/IPSec, SSTP, and IKEv2

    Objective:Configuring Mobile Computing

    Item: 254Which ScanState parameter should you use to ensure that themigration store is encrypted?

  • 8/12/2019 Flashcards 02 70-680

    23/24

    Answer:/encrypt

    Objective:Installing, Upgrading, and Migrating to Windows 7

    Item: 255How would you run an executable as another user through

    Windows Explorer?Answer:Hold the [Shift] key down, right-click the mouse and chooseRun As Different User

    Objective:Configuring Access to Resources

    Item: 256To ensure that your default printer changes when you changenetworks, what should you configure in Devices and Printers?

    Answer:set Change my default printer when I change networks

    Objective:

    Configuring Network ConnectivityItem: 257What type of IPv6 address is used to send packets in the localsubnet?

    Answer:Link-local addresses

    Objective:Configuring Network Connectivity

    Item: 258What must you have on your computer to use BitLocker toencrypt the volume that contains the Windows operatingsystem files?

    Answer:Support for a bootable USB device or Trusted Platform Moduleversion 1.2, or later

    Objective:Configuring Mobile Computing

    Item: 259How can you have additional people view, execute, or modifyan encrypted file on a computer?

    Answer:Add an encryption certificate and key to the file.

    Objective:Configuring Access to Resources

    Item: 260Which wireless security type will use the encryption type ofAES but must use a user key?

    Answer:WPA2-Personal

    Objective:Configuring Network Connectivity

    Item: 261What sequence of commands in DiskPart will allow you to addan existing .vhd file as a disk in Windows 7?

  • 8/12/2019 Flashcards 02 70-680

    24/24

    Answer:SELECT VDISK FILE="FILE NAME"

    ATTACH VDISK

    Objective:Deploying Windows 7

    Item: 262

    Which Windows 7 edition will allow to you to switch the userinterface between any of 35 languages?

    Answer:Windows 7 Ultimate

    Objective:Configuring Hardware and Applications

    Item: 263What operating systems can support BranchCache?

    Answer:The Enterprise edition and Ultimate edition of Windows 7 andWindows Server 2008 R2

    Objective:

    Configuring Access to Resources