Upload
others
View
1
Download
0
Embed Size (px)
Citation preview
Brief description
Parker Zander, high-performance FL-series fi lters, containing VL grade fi lter elements are designed as depth-fi lters for the reliable removal of 3 µm solid particulate, whilst achieving a fi ltration performance of 99.95 % in com-pressed air or compressed nitrogen gas.
The innovative fi lter housing and fi lter element design achieve optimum fl ow characteristics at minimum pressure drop resulting in considerable cost sav-ings throughout the entire operating lifetime of the fi lter element. These fi lters are equipped as standard with a manual drain.
Highly-effi cient, borosilicate nano-fi bre media with a voids volume of 96 % ensures high dirt-holding capacity at constantly low differential pres-sure. This effi ciency is supported by deep-pleating technology enabling 4.5 times more fi ltration surface area to be incorporated into the element, when compared with conventional fi lter elements.
The fi lter-housing design has been de-signed for ease of maintenance: The deep-seated service-fl ange, supported by a pivoting hinge-joint, enables ele-ment replacement to be undertaken by a single individual.
The patented “lock-in place” fi lter elements, referred to as “Sure-Fit”, provide a secure and noticeable seal to avoid any possibility of contamina-tion by-passing the element.
Ordner no. Port size1 Nominal2
FL17VLH DN80 2232
FL20VLH DN100 4464
FL30VLH DN150 6696
FL40VLH DN150 8928
FL60VLH DN200 13392
FL100VLH DN250 22320
FL140VLH DN300 31248
Flanged Filter Series FL17VL-FL140VL High effi ciency, coarse particulate for larger compressed air systems
Scope of supplyReady-to install fi lter, complete with fi lter element(s) and manual drain. Optionally available with differential pressure gauge.
1: Port size as per EN 1092-1
2: Flow rates in m³/h related to 1 bara und 20 °C, compressed to 7 bare. Where the minimum operating pressure deviates, the actual fl ow rate must be multiplied with the respective correction factor f (see the respective table) to determine the required nominal fl ow rate and the appropriately required fi lter model.
Performance overview:
mb air systems ltdmb air systems ltd
Performance data Element Removal Solid particulate
Flow direction from inside to outside
Upstream filter required no data
Particle removal size 3 µm
Filtration efficiency 99.95 %
Differential pressure, dry < 70 mbare
Diff. pressure, saturated no data
Correction factor f according to actual minimum operating pressure in bare
Min. operating pressure in bare 1 1,5 2 2,5 3 3,5 4 4,5 5 5,5 6 6,5 7 7,5 8
correction factor f 2,65 2,16 1,87 1,67 1,53 1,41 1,32 1,25 1,18 1,13 1,08 1,04 1,00 0,97 0,94
Min. operating pressure in bare 8,5 9 9,5 10 10,5 11 11,5 12 12,5 13 13,5 14 14,5 15 16
correction factor f 0,91 0,88 0,86 0,84 0,82 0,80 0,78 0,76 0,75 0,73 0,72 0,71 0,69 0,68 0,66
Example for a maximal flow rate of 3000 m³/h for a minimum operating pressure of 4,3 bare: 3000 m³/h x 1.32 = 3960 m³/h – select size FL20 (see Table Performance overview).
Product-SpecificationFlanged filter series FL - element grade VL
Area of application FilterStandard filter Compressed air and gaseous Nitrogen
Max. operating pressure 16 bare
Operating temperature 1.5 up to 80 °C with manual drain and with differential pressure gauge
1.5 up to 100 °C with manual drain, without differential pressure gauge
Scope of supply Standard filterOrder no. Port size1 Nominal2 Quantity filter elements Order no. filter element
FL17VLH DN80 2232 1 CPS4060VL
FL20VLH DN100 4464 2 CPS4060VL
FL30VLH DN150 6696 3 CPS4060VL
FL40VLH DN150 8928 4 CPS4060VL
FL60VLH DN200 13392 6 CPS4060VL
FL100VLH DN250 22320 10 CPS4060VL
FL140VLH DN300 31248 14 CPS4060VL
mb air systems ltdmb air systems ltd
Product-SpecificationFlanged filter series FL - element grade VL
Filter model A B C D Weight
FL17VLH 440 1120 230 650 71
FL20VLH 500 1215 260 650 98
FL30VLH 600 1320 310 650 149
FL40VLH 650 1395 350 650 188
FL60VLH 750 1475 390 650 242
FL100VLH 1000 1665 510 850 472
FL140VLH 1050 1770 540 920 582
Dimensions [mm] and weights [kg]
Product key
Series Size Element grade Options
FL 17 up to 140 VL D, H
Examples
FL 30 VL D, H Design with differential pressure gauge and with manual drain
FL 100 VL H Standard design with manual drain
Materials ElementFilter fleece Borosilicate nanofibre, surface coated
Support net Polypropylene
Outer sleeve Polyester fibre, surface coated
Support screens Stainless steel
End caps Glass fibre reinforced polyamide
Adhesive Epoxy resin
Sealing materials NBR
Quality assurance and warrantyR&D, Manufacturing DIN EN ISO 9001, DIN EN ISO 14001
Validation ISO 8573-1:2010 [3:-:-], ISO 8573-4
Element 12 months guaranteed filtration performance in line with filter element service life.
Housing Corrosion warranty limited to the maximum housing lifetime of 10 years.
A
B
D
C
Approvals for pressure equipmentEU Approval for fluid group 2 acc. to Pressure Equipment Directive 97/23/EC
GUS TR (previous GOST-R)
Materials HousingHousing body Steel acc. to AD2000 leaflets
Surface treatment Sandblasted RA2.5, 2-component acrylic enamel
Gaskets Aramid fibers with NBR binder
Fittings Nickel plated brass, brass, galvanized steel
mb air systems ltdmb air systems ltd
BULFL17VL-140VL-EN
Your local authorized Parker distributor
Parker Hannifin GmbH Pat-Parker-Platz 141564 Kaarst Tel.: +49 (0)2131 4016 0 Fax: +49 (0)2131 4016 [email protected]
© 2013 Parker Hannifin Corporation. All rights reserved.
Product-SpecificationFlanged filter series FL - element grade VL
Order no. Scope of supply
CPS4060VL Filter element (required quantity see Table Scope of Supply)
398H240245 Flat gasket DN200 PN16 for filter model FL17
398H240270 Flat gasket DN250 PN16 for filter model FL20
398H240292 Flat gasket DN350 PN16 for filter model FL30
398H240293 Flat gasket DN400 PN16 for filter model FL40
398H240295 Flat gasket DN450 PN16 for filter model FL60
398H240296 Flat gasket DN600 PN16 for filter model FL100
398H240297 Flat gasket DN700 PN16 for filter model FL140
Wear parts
Differential pressure gauge mounted
Order no. Function Suitable for filter Product key
ZD95FL calibrated analogue differential FL17 up to FL140 D
Accessories
Differential pressure gauge loose, incl. mounting set
Order no. Function Suitable for filter Product key
ZDE95FL calibrated analogue differential pressure gauge with Reed contact FL17 up to FL140 -
ZDE125FL electronic differential pressure gauge FL17 up to FL140 -
Other drains available as loose accessories.
Gaskets for filter combination, loose
Order no. Function Suitable for filter Product key
398H240150 Flat gasket pipe flange DN80 PN16 FL17 -
398H240170 Flat gasket pipe flange DN100 PN16 FL20 -
398H240222 Flat gasket pipe flange DN150 PN16 FL30 up to FL40 -
398H240245 Flat gasket pipe flange DN200 PN16 FL60 -
398H240270 Flat gasket pipe flange DN250 PN16 FL100 -
398H240310 Flat gasket pipe flange DN300 PN16 FL140 -
Drain mounted
Order no. Function Suitable for filter Product key
398H473471 manual drain kit G 1/2 FL17 H
398H473472 manual drain kit G 1 FL20 up to FL140 H
mb air systems ltdmb air systems ltd
Brief description
Parker Zander, high-performance FL-series fi lters, containing XL grade fi lter elements are designed as depth-fi lters for the reliable removal of 0.01 µm liquid and solid particulate, whilst achieving a fi ltration performance of 99.9999% in compressed air or compressed nitrogen gas – independently validated acc. to ISO 12500-1.
The innovative fi lter housing and fi lter element design achieve optimum fl ow characteristics at minimum pressure drop resulting in considerable cost savings throughout the entire operating lifetime of the fi lter element. These fi lters are equipped as standard with the level-sensing, electronic condensate drains from the tried and tested ED3000 series, characterized by their zero air-loss func-tion and reliable drainage of even the largest amount of oil/water condensate.
Highly-effi cient, borosilicate nano-fi bre media with a voids volume of 96 % ensures high dirt-holding capacity at constantly low differential pressure. This effi ciency is supported by deep-pleating technology enabling 4.5 times more fi ltration surface area to be incorporated into the element, when compared with conventional fi lter elements.
The fi lter-housing design has been designed for easy of maintenance: The deep-seated service-fl ange, supported by a pivoting hinge-joint, enables ele-ment replacement to be undertaken by a single individual. The dished-bottom provides ample space to drain away liquids effi ciently.
The patented “lock-in place” fi lter ele-ments, referred to as “Sure-Fit”, provide a secure and noticeable seal to avoid any possibility of contamination by-passing the element.
Ordner no. Port size1 Nominal2
FL17XLK3 DN80 2232
FL20XLK3 DN100 4464
FL30XLK3 DN150 6696
FL40XLK3 DN150 8928
FL60XLK3 DN200 13392
FL100XLK3 DN250 22320
FL140XLK3 DN300 31248
Scope of supplyReady-to-install fi lter, complete with fi lter element(s) and electronic condensate drain of ED3000 series. Optionally available with differential pressure gauge and/or manual drain.
1: Port size as per EN 1092-1
2: Flow rates in m³/h related to 1 bara und 20 °C, compressed to 7 bare. Where the minimum operating pressure deviates, the actual fl ow rate must be multiplied with the respective correction factor f (see the respective table) to determine the required nominal fl ow rate and the appropriately required fi lter model.
Performance overview:
Flanged Filter Series FL17XL-FL140XLHigh effi ciency, sub-micron fi lter for larger compressed air systems
mb air systems ltdmb air systems ltd
Product-SpecificationFlanged filter series FL - element grade XL
Performance data Element Filtration Liquid and solid particulate
Flow direction from inside to outside
Upstream filter required ZL
Particle removal size 0,01 µm
Aerosole challenging conc. 10 mg/m³ Residual aerosole concentration 0.01 mg/m³
Filtration efficiency 99,9999 %
Differential pressure, dry < 140 mbare
Diff. pressure, saturated < 200 mbare
Correction factor f according to actual minimum operating pressure in bare
Min. operating pressure in bare 1 1,5 2 2,5 3 3,5 4 4,5 5 5,5 6 6,5 7 7,5 8
correction factor f 2,65 2,16 1,87 1,67 1,53 1,41 1,32 1,25 1,18 1,13 1,08 1,04 1,00 0,97 0,94
Min. operating pressure in bare 8,5 9 9,5 10 10,5 11 11,5 12 12,5 13 13,5 14 14,5 15 16
correction factor f 0,91 0,88 0,86 0,84 0,82 0,80 0,78 0,76 0,75 0,73 0,72 0,71 0,69 0,68 0,66
Example for a maximal flow rate of 3000 m³/h for a minimum operating pressure of 4,3 bare: 3000 m³/h x 1.32 = 3960 m³/h – select size FL20 (see Table Performance overview).
Electrical data with electronic condensate drain of ED3000 seriesPower supply 230 V, 50/60 Hz
ingress protection IP 65
Area of application FilterFlow medium Compressed air and gaseous Nitrogen
Max. operating pressure 16 bare
Operating temperature 1,5 up to 60 °C with electronic condensate drain of ED3000 series
1,5 up to 80 °C with manual drain, with differential pressure gauge
1,5 up to 100 °C with manual drain, without differential pressure gauge
Scope of supply standard filter Order no. Port size1 Nominal2 Quantity filter elements Order no. filter element Order no. Condensate Drain
FL17XLK3 DN80 2232 1 CPS4060XL ED3007-G230
FL20XLK3 DN100 4464 2 CPS4060XL ED3030-G230
FL30XLK3 DN150 6696 3 CPS4060XL ED3030-G230
FL40XLK3 DN150 8928 4 CPS4060XL ED3030-G230
FL60XLK3 DN200 13392 6 CPS4060XL ED3030-G230
FL100XLK3 DN250 22320 10 CPS4060XL ED3100-G230
FL140XLK3 DN300 31248 14 CPS4060XL ED3100-G230
mb air systems ltdmb air systems ltd
Product-SpecificationFlanged filter series FL - element grade XL
A
B
D
C
Filter model A B C D Weight
FL17XLK3 440 1265 230 650 72
FL20XLK3 500 1365 260 650 99
FL30XLK3 600 1470 310 650 150
FL40XLK3 650 1545 350 650 190
FL60XLK3 750 1625 390 650 243
FL100XLK3 1000 1870 510 850 474
FL140XLK3 1050 1975 540 920 584
Dimensions [mm] and weights [kg]
Product key
Series Size Element grade Options
FL 17 up to 140 XL D, H, K3
Examples
FL 30 XL D, K3 Design with differential pressure gauge and electronic condensate drain
FL 100 XL H Design with manual drain
Approvals for pressure equipmentEU Approval for fluid group 2 acc. to Pressure Equipment Directive 97/23/EC
GUS TR (previous GOST-R)
Materials HousingHousing body Steel acc. to AD2000 leaflets
Surface treatment sandblasted RA2.5, 2-component acrylic enamel
Gaskets aramid fibers with NBR binder
Fittings nickel plated brass, brass, galvanized steel
Materials ElementFilter fleece Borosilicate nanofibre, surface coated
Support net Polypropylene
Outer sleeve Polyester fibre, surface coated
Support screens Stainless steel
End caps Glass fibre reinforced polyamide
Adhesive Epoxy resin
Sealing materials NBR
Quality assurance and warrantyR&D, Manufacturing DIN EN ISO 9001, DIN EN ISO 14001
Validation ISO 12500-1, ISO 8573-1:2010 [1:-:2]
Element 12 months guaranteed filtration performance in line with filter element service life.
Housing Corrosion warranty limited to the maximum housing lifetime of 10 years.
mb air systems ltdmb air systems ltd
Your local authorized Parker distributor
Product-SpecificationFlanged filter series FL - element grade XL
BULFL17XL-140XL-ENEMEA Product Information CentreFree phone: 00 800 27 27 5374(from AT, BE, CH, CZ, DE, DK, EE, ES, FI, FR, IE, IL, IS, IT, LU, MT, NL, NO, PL, PT, RU, SE, SK, UK, ZA)
US Product Information CentreToll-free number: 1-800-27 27 537
www.parker.com
© 2013 Parker Hannifin Corporation. All rights reserved.
Order no. Scope of supply
CPS4060XL Filter element (required quantity see Table Scope of Supply)
398H240245 Flat gasket DN200 PN16 for filter model FL17
398H240270 Flat gasket DN250 PN16 for filter model FL20
398H240292 Flat gasket DN350 PN16 for filter model FL30
398H240293 Flat gasket DN400 PN16 for filter model FL40
398H240295 Flat gasket DN450 PN16 for filter model FL60
398H240296 Flat gasket DN600 PN16 for filter model FL100
398H240297 Flat gasket DN700 PN16 for filter model FL140
SKED3000 Service kit for the yearly preventative maintenance of the electronic condensate drain
Wear parts
Differential pressure gauge mounted
Order no. Function Suitable for Product key
ZD95FL calibrated analogue differential pressure gauge incl. mounting set FL17 up to FL140 D
Accessories
Drain mounted
Order no. Function Suitable for Product key
ED3007-G230 electronic condensate drain (standard) FL17 K3
ED3030-G230 electronic condensate drain (standard) FL20 up to FL60 K3
ED3100-G230 electronic condensate drain (standard) FL100 up to FL140 K3
398H473471 manual drain kit G 1/2 FL17 H
398H473472 manual drain kit G 1 FL20 up to FL140 H
Other drains available as loose accessories.
Differential pressure gauge loose, incl. mounting set
Order no. Function Suitable for Product key
ZDE95FL calibrated analogue differential pressure gauge with Reed contact FL17 up to FL140 -
ZDE125FL electronic differential pressure gauge FL17 up to FL140 -
Mounting kits for drains, loose
Order no. Filter port Drain port Suitable for filter Suitable for drain
MK-G15-G15 G1/2o G1/2o FL17 ED3007, ED2010
MK-G25-G15 G1o G1/2o FL20 up to FL140 ED3030, ED3100 and ED2020 and ED2060
Flat gaskets for filter combination, loose
Order no. Function Suitable for Product key
398H240150 Flat gasket pipe flange DN80 PN16 FL17 -
398H240170 Flat gasket pipe flange DN100 PN16 FL20 -
398H240222 Flat gasket pipe flange DN150 PN16 FL30 up to FL40 -
398H240245 Flat gasket pipe flange DN200 PN16 FL60 -
398H240270 Flat gasket pipe flange DN250 PN16 FL100 -
398H240310 Flat gasket pipe flange DN300 PN16 FL140 -
mb air systems ltdmb air systems ltd
Brief description
Parker Zander, high-performance FL-series fi lters, containing ZL grade fi lter elements are designed as depth-fi lters for the reliable removal of 1 µm liquid and solid particulate, whilst achieving a fi ltration performance of 99.925 % in compressed air or compressed nitrogen gas – independently validated acc. to ISO 12500-1.
The innovative fi lter housing and fi lter element design achieve optimum fl ow characteristics at minimum pressure drop resulting in considerable cost sa-vings throughout the entire operating lifetime of the fi lter element. These fi lters are equipped as standard with the level-sensing, electronic conden-sate drains from the tried and tested ED3000 series, characterized by their zero air-loss function and reliable drain-age of even the largest amount of oil/water condensate.
Highly-effi cient, borosilicate nano-fi bre media with a voids volume of 96 % ensures high dirt-holding capacity at constantly low differential pres-sure. This effi ciency is supported by deep-pleating technology enabling 4.5 times more fi ltration surface area to be incorporated into the element, when compared with conventional fi lter elements.
The fi lter-housing design has been designed for easy of maintenance: The deep-seated service-fl ange, supported by a pivoting hinge-joint, enables element replacement to be undertaken by a single individual. The dished-bottom provides ample space to drain away liquids effi ciently.
The patented “lock-in place” fi lter elements, referred to as “Sure-Fit”, provide a secure and noticeable seal to avoid any possibility of contamina-tion by-passing the element.
Ordner no. Port size1 Nominal2
FL17ZLK3 DN80 2232
FL20ZLK3 DN100 4464
FL30ZLK3 DN150 6696
FL40ZLK3 DN150 8928
FL60ZLK3 DN200 13392
FL100ZLK3 DN250 22320
FL140ZLK3 DN300 31248
Flanged Filter Series FL17ZL-FL140ZL High effi ciency, micro fi lter for larger compressed air systems
Scope of supplyReady-to-install fi lter, complete with fi lter element(s) and electronic condensate drain of ED3000 series. Optionally available with differential pressure gauge and/or manual drain.
1: Port size as per EN 1092-1
2: Flow rates in m³/h related to 1 bara und 20 °C, compressed to 7 bare. Where the minimum operating pressure deviates, the actual fl ow rate must be multiplied with the respective correction factor f (see the respective table) to determine the required nominal fl ow rate and the appropriately required fi lter model.
Performance overview:
mb air systems ltdmb air systems ltd
Performance data Element Filtration Liquid and solid particulate
Flow direction from inside to outside
Upstream filter required Water separator (in case of wall flow)
Particle removal size 1 µm
Aerosole challenging conc. 40 mg/m³ Residual aerosole concentration 0.6 mg/m³
Filtration efficiency 99,925 %
Differential pressure, dry < 70 mbare
Diff. pressure, saturated < 140 mbare
Correction factor f according to actual minimum operating pressure in bare
Min. operating pressure in bare 1 1,5 2 2,5 3 3,5 4 4,5 5 5,5 6 6,5 7 7,5 8
correction factor f 2,65 2,16 1,87 1,67 1,53 1,41 1,32 1,25 1,18 1,13 1,08 1,04 1,00 0,97 0,94
Min. operating pressure in bare 8,5 9 9,5 10 10,5 11 11,5 12 12,5 13 13,5 14 14,5 15 16
correction factor f 0,91 0,88 0,86 0,84 0,82 0,80 0,78 0,76 0,75 0,73 0,72 0,71 0,69 0,68 0,66
Example for a maximal flow rate of 3000 m³/h for a minimum operating pressure of 4,3 bare: 3000 m³/h x 1.32 = 3960 m³/h – select size FL20 (see Table Performance overview).
Product-SpecificationFlanged filter series FL - element grade ZL
Electrical data with electronic condensate drain of ED3000 seriesPower supply 230 V, 50/60 Hz
ingress protection IP 65
Area of application FilterFlow medium Compressed air and gaseous Nitrogen
Max. operating pressure 16 bare
Operating temperature 1,5 up to 60 °C with electronic condensate drain of ED3000 series
1,5 up to 80 °C with manual drain, with differential pressure gauge
1,5 up to 100 °C with manual drain, without differential pressure gauge
Scope of supply standard filterOrder no. Port size1 Nominal2 Quantity filter elements Order no. filter element Order no. Condensate Drain
FL17ZLK3 DN80 2232 1 CPS4060ZL ED3007-G230
FL20ZLK3 DN100 4464 2 CPS4060ZL ED3030-G230
FL30ZLK3 DN150 6696 3 CPS4060ZL ED3030-G230
FL40ZLK3 DN150 8928 4 CPS4060ZL ED3030-G230
FL60ZLK3 DN200 13392 6 CPS4060ZL ED3030-G230
FL100ZLK3 DN250 22320 10 CPS4060ZL ED3100-G230
FL140ZLK3 DN300 31248 14 CPS4060ZL ED3100-G230
mb air systems ltdmb air systems ltd
Product-SpecificationFlanged filter series FL - element grade ZL
Filter model A B C D Weight
FL17ZLK3 440 1265 230 650 72
FL20ZLK3 500 1365 260 650 99
FL30ZLK3 600 1470 310 650 150
FL40ZLK3 650 1545 350 650 190
FL60ZLK3 750 1625 390 650 243
FL100ZLK3 1000 1870 510 850 474
FL140ZLK3 1050 1975 540 920 584
Dimensions [mm] and weights [kg]
Product key
Approvals for pressure equipmentEU Approval for fluid group 2 acc. to Pressure Equipment Directive 97/23/EC
GUS TR (previous GOST-R)
Materials HousingHousing body Steel acc. to AD2000 leaflets
Surface treatment sandblasted RA2.5, 2-component acrylic enamel
Gaskets aramid fibers with NBR binder
Fittings nickel plated brass, brass, galvanized steel
Materials ElementFilter fleece Borosilicate nanofibre, surface coated
Support net Polypropylene
Outer sleeve Polyester fibre, surface coated
Support screens Stainless steel
End caps Glass fibre reinforced polyamide
Adhesive Epoxy resin
Sealing materials NBR
Quality assurance and warrantyR&D, Manufacturing DIN EN ISO 9001, DIN EN ISO 14001
Validation ISO 12500-1, ISO 8573-1:2010 [2:-:3]
Element 12 months guaranteed filtration performance in line with filter element service life.
Housing Corrosion warranty limited to the maximum housing lifetime of 10 years.
A
B
D
C
Series Size Element grade Options
FL 17 up to 140 ZL D, H, K3
Examples
FL 30 ZL D, K3 Design with differential pressure gauge and electronic condensate drain
FL 100 ZL H Design with manual drain
mb air systems ltdmb air systems ltd
BULFL17ZL-140ZL-EN
Your local authorized Parker distributor
EMEA Product Information CentreFree phone: 00 800 27 27 5374(from AT, BE, CH, CZ, DE, DK, EE, ES, FI, FR, IE, IL, IS, IT, LU, MT, NL, NO, PL, PT, RU, SE, SK, UK, ZA)
US Product Information CentreToll-free number: 1-800-27 27 537
www.parker.com
© 2013 Parker Hannifin Corporation. All rights reserved.
Product-SpecificationFlanged filter series FL - element grade ZL
Order no. Scope of supply
CPS4060ZL Filter element (required quantity see Table Scope of Supply)
398H240245 Flat gasket DN200 PN16 for filter model FL17
398H240270 Flat gasket DN250 PN16 for filter model FL20
398H240292 Flat gasket DN350 PN16 for filter model FL30
398H240293 Flat gasket DN400 PN16 for filter model FL40
398H240295 Flat gasket DN450 PN16 for filter model FL60
398H240296 Flat gasket DN600 PN16 for filter model FL100
398H240297 Flat gasket DN700 PN16 for filter model FL140
SKED3000 Service kit for the yearly preventative maintenance of the electronic condensate drain
Wear parts
Differential pressure gauge mounted
Order no. Function Suitable for Product key
ZD95FL calibrated analogue differential pressure gauge incl. mounting set FL17 up to FL140 D
Accessories
Drain mounted
Order no. Function Suitable for Product key
ED3007-G230 electronic condensate drain (standard) FL17 K3
ED3030-G230 electronic condensate drain (standard) FL20 up to FL60 K3
ED3100-G230 electronic condensate drain (standard) FL100 up to FL140 K3
398H473471 manual drain kit G 1/2 FL17 H
398H473472 manual drain kit G 1 FL20 up to FL140 H
Other drains available as loose accessories.
Differential pressure gauge loose, incl. mounting set
Order no. Function Suitable for Product key
ZDE95FL calibrated analogue differential pressure gauge with Reed contact FL17 up to FL140 -
ZDE125FL electronic differential pressure gauge FL17 up to FL140 -
Mounting kits for drains, loose
Order no. Filter port Drain port Suitable for filter Suitable for drain
MK-G15-G15 G1/2o G1/2o FL17 ED3007, ED2010
MK-G25-G15 G1o G1/2o FL20 up to FL140 ED3030, ED3100,ED2020, ED2060
Flat gaskets for filter combination, loose
Order no. Function Suitable for Product key
398H240150 Flat gasket pipe flange DN80 PN16 FL17 -
398H240170 Flat gasket pipe flange DN100 PN16 FL20 -
398H240222 Flat gasket pipe flange DN150 PN16 FL30 up to FL40 -
398H240245 Flat gasket pipe flange DN200 PN16 FL60 -
398H240270 Flat gasket pipe flange DN250 PN16 FL100 -
398H240310 Flat gasket pipe flange DN300 PN16 FL140 -
mb air systems ltdmb air systems ltd
mb air systems ltdCompany Directory:
149 Glasgow Road Wellheads Road Wishaw Farburn Industrial Estate Lanarkshire Dyce, Aberdeen ML2 7QJ AB21 7HG Tel 01698 355711 Tel 01224 723434 Fax 01698 359299 Fax 01224 723545 Fleming Close 8 Burford Way Segensworth East Boldon Business Park Fareham Boldon Hampshire Tyne & Wear PO15 5SB NE35 9PZ Tel 01489 588398 Tel 0191 519 5500 Fax 01489 588381 Fax 0191 537 1105
E-mail [email protected]
www.airwinch.co.uk
engineering solutions
com
pres
sed
airde
sign
pneu
mat
ics
& to
ols
prod
uct fi
nish
ing
serv
ice
offs
hore
lifti
ng
mb air systems ltd