Flags Setting for VMAX February 2013

EMC Support MatrixInteroperability ResultsP/N 300-000-166Rev 43

Table of ContentsCopyright EMC Corporation 2013...................................................................................................................................................................................................1

EMC's Policies and Requirements for EMC Support Matrix........................................................................................................................................................2

Director Bit/Flag Information..........................................................................................................................................................................................................4

i

Copyright EMC Corporation 2013

Copyright 2001, 2013 EMC Corporation. All Rights Reserved.

EMC believes the information in this publication is accurate as of its publication date. The information is subject to change without notice.

THE INFORMATION IN THIS PUBLICATION IS PROVIDED "AS IS". EMC CORPORATION MAKES NO REPRESENTATIONS OR WARRANTIES OF ANYKIND WITH RESPECT TO THE INFORMATION IN THIS PUBLICATION, AND SPECIFICALLY DISCLAIMS IMPLIED WARRANTIES OF MERCHANTABILITYOR FITNESS FOR A PARTICULAR PURPOSE.

Use, copying, and distribution of any EMC software described in this publication requires an applicable software license.

Trademark Information

EMC2, EMC, EMC ControlCenter, AlphaStor, ApplicationXtender, Catalog Solution, Celerra, CentraStar, CLARalert, CLARiiON, ClientPak, Connectrix,Co-StandbyServer, Dantz, Direct Matrix Architecture, DiskXtender, Documentum, EmailXtender, EmailXtract, HighRoad, Legato, Legato NetWorker,Navisphere, OpenScale, PowerPath, RepliStor, ResourcePak, Retrospect, Smarts, SnapShotServer, SnapView/IP, SRDF, Symmetrix, TimeFinder, VisualSAN,VSAM Assist, Xtender, Xtender Solutions, and where information lives are registered trademarks and EMC Developers Program, EMC OnCourse, EMCProven, EMC Snap, EMC Storage Administrator, Access Logix, ArchiveXtender, Authentic Problems, Automated Resource Manager, AutoStart, AutoSwap,AVALONidm, C-Clip, Celerra Replicator, Centera, CLARevent, Codebook Correlation Technology, Common Information Model, CopyCross, CopyPoint,DatabaseXtender, Direct Matrix, DiskXtender 2000, EDM, E-Lab, EmailXaminer, Enginuity, eRoom, FarPoint, FLARE, FullTime, Global File Virtualization,Graphic Visualization, InfoMover, Invista, MirrorView, NetWin, NetWorker, OnAlert, Powerlink, PowerSnap, Rainfinity, RecoverPoint, RepliCare, SafeLine, SANAdvisor, SAN Copy, SAN Manager, SDMS, SnapImage, SnapSure, SnapView, StorageScope, SupportMate, SymmAPI, SymmEnabler, Symmetrix DMX,UltraPoint, Viewlets, VisualSRM, and WebXtender are trademarks of EMC Corporation. All other trademarks used herein are the property of their respectiveowners.

Copyright EMC Corporation 2013 1

EMC's Policies and Requirements for EMC Support Matrix

EMC's Support Matrix Policies and Requirements

This section describes EMC's policies and requirements for the EMC Support Matrix document.

Purpose and Limitations of this Document

This document is being provided for informational purposes only and may change at any time. This version supercedes and replaces all previous versions. Theinformation is to serve only as a guide for those configurations/products which EMC has qualified. This document identifies and lists various vendor hostsystems and integral components that have been tested and qualified by EMC for use with EMC products. Vendor components include, but are not limited to,host operating systems, HBAs (host bus adapters) and associated drivers, firmware and BIOS; Fibre Channel switches, hubs and bridges. This document alsolists various vendors, cluster software, tape hardware, storage system boot procedures, heterogeneous information storage, and configurations that EMC hastested and/or qualified for use with EMC products.

The information included in this document is intended as a guide in the configuration of systems for EMC's products. It is not intended to be the sole resourcefor system configuration. For more information or answers to questions not found in this document, please see EMC's website, other EMC documentation, suchas EMC's Host Connectivity Guides, EMC Networked Storage Topology Guide, EMC CLARiiON Open Systems Configuration Guide, relevant vendordocumentation, or contact your EMC Sales or EMC Customer Service representative.

For Symmetrix 4.x support, please look at the Symmetrix 8000 Series section and check the footnotes for model/microcode compatibility. EMC employees canobtain older revisions of ESM containing more Symmetrix 4.x information from the Symmetrix Service Readiness group.

For a complete listing of any known issues with the current support matrix content, please review the ESM Errata on E-Lab Interoperability Navigator. To reportany issues with the content contained within the support matrix, follow the steps documented on the Contacts link on E-Lab Interoperability Navigator. ForE-Lab Interoperability Navigator access through Powerlink:http://powerlink.emc.com/community/tools/index.jhtml?community_id=2&categoryId=esn_builder&categoryName=E-Lab+Navigator. For access through Avatar:http://avatar.eng.emc.com/Avatar.asp.

Policies for Qualifying Systems

Policies and procedures for support of EMC products are set forth in the customer's applicable agreements. EMC's publication of information relating to systemconfigurations covers only those outlined in this document or by approval from EMC Engineering. Other system configurations not found in this document arenot qualified without EMC Engineering approval. EMC has qualified hardware and software provided only by the vendors listed in this document, and hostsystems, hardware and software from other vendors are not qualified, and may never be. Please contact your EMC Sales or EMC Customer Servicerepresentative for updates or information not included in this document.

EMC maintains a large collection of the products listed above as well as third-party application software for qualification with EMC's storage systems and tosimulate customer environments, but you must consult the vendors for information about their system internals, such as hardware and associated drivers.

Policy for Future Qualification of Operating System Software Releases

The information in this document is maintained by EMC and EMC strives to update this document with new releases of hardware, operating systems, firmware,BIOS, switch software, etc., as they become available from the vendors. EMC works with the vendors during their development and release processes in orderto be fully informed at the time the vendors release new versions. EMC does not announce qualification prior to vendors' General Availability. In some cases,EMC may choose to perform regression testing following the vendors' GA; in these cases and in cases where advance preparation is not possible, EMC maytest and qualify vendors' products as appropriate after they have been released. For early support of such products, including vendor beta participation, contactyour EMC Sales or EMC Customer Service representative.

Policy for End-of-Life Support

EMC strives to continue support for any installed platforms, but may remove support from this host matrix for new installations within three months after thevendor has announced that this platform has reached the end of life. EMC will continue support for existing installations of hardware, operating systems, andcomponents that the vendor has officially declared to have reached end of life as long as support is available from the vendor.

Your Selections:Storage Array EMC Symmetrix VMAX

EMC's Policies and Requirements for EMC Support Matrix 2

Relevant Documentation or Links

SymmetrixVMAXe Series

Symmetrix VMAXe series delivers a multi-controller, scale-up and scale-out architecture at an affordable price. VMAXe uses the sameVirtual Matrix Architecture as the Symmetrix VMAX series, breaking through the physical boundaries of fixed backplane storagearchitectures to deliver the highest levels of reliability, availability, and serviceability. Designed to be 100 percent virtually provisioned,Symmetrix VMAXe storage is automatically configured and allocated. With Fully Automated Storage Tiering for Virtual Pools (FASTVP), Symmetrix VMAXe automatically moves data to the right place, at the right time. Symmetrix VMAXe includes bundled softwarefor intelligent and easy operation, as well as local and remote disaster recovery capabilities with EMC TimeFinder for VMAXe and anintegrated splitter for EMC RecoverPoint.

Symmetrix DMXSeries ProductInformation

Symmetrix DMX series continues to deliver innovation and advanced capabilities. It provides highly available, high-performance, fullmainframe support; and flexible connectivity options, including Fibre Channel, FICON, ESCON, Gigabit Ethernet, and iSCSI.Organizations of all sizes rely on Symmetrix for constant data access, business continuity, and massive consolidation. Available underProducts > Hardware/Platforms > Symmetrix.

SymmetrixVMAX SeriesProductInformation

Symmetrix VMAX, the world's most powerful, trusted, and intelligent storage system, is built for the virtual data center. Based on theVirtual Matrix Architecture, Symmetrix VMAX scales performance and capacity to unprecedented levels, delivers nondisruptiveoperations, and greatly simplifies and automates the management and protection of information. Fully Automated Storage Tiering forVirtual Pools (FAST VP) automatically maximizes performance and reduces costs by placing active information on Flash drives andinactive information on SATA drives. FAST VP enables organizations to use a combination of Flash, Fibre Channel, SAS, and SATAdrives together in Tier 1 environments to optimize performance and reduce costs.

E-Lab Advisor(ELA)

The E-Lab Advisor (ELA) tool has integrated the functionality of HEAT, SWAT, Celerra Health Check, SANsummary and SYMAPI LogAnalyzer tools. These standalone tools were decommissioned on September 30, 2011. Unlike those tools, E-Lab Advisor features asingle upload page. You upload the file, and it will run the corresponding report.

Storage TargetRevisions andAdoption Rates

To ensure stable and reliable environments, EMC recommends target codes for each EMC Storage Operating Environment (SOE).This report lists the target codes and customer adoption rates for SOEs: Celerra DART, Centera CentraStar, CLARiiONFLARE, Invista, and Symmetrix Enginuity. Connectrix target codes are included.

EMC Powerlink Up-to-date technical documents about EMC's products and services, including microcode release notes, product manuals, softwarerelease notes and more. See the "Quicklinks" section of the Powerlink home page.

E-Lab IssueTracker Up-to-date information on EMC product issues that could have an impact on your operations.

EMC's Policies and Requirements for EMC Support Matrix

EMC's Policies and Requirements for EMC Support Matrix 3

Director Bit/Flag InformationOperating Environments that only require Base Topologies are not listed. All the Operating Environments listed in the table require the Base Topologiesand the additional settings specified for the Operating Environment. Optional Director Bit Settings include settings for special use or to enable optionalfunctionality (refer to footnotes for uses). Optional Director Bits may also be used to identify tolerant values when an Operating System is used in aheterogeneous environment having the same Required Director Bits. In situations that require multiple combinations of director bits on the same port, thepreferred method is to utilize Solutions Enabler where supported to apply settings on an initiator WWN basis.

For FC Loop Base Topology (FC-AL), please enable the EAN (Enable Auto Negotiation) and UWN (Unique WWN) bits.

For FC Switch Base Topology (FC-SW), please enable the EAN (Enable Auto Negotiation), PP (Point-to-Point) and UWN (Unique WWN) bits.

No specific bit is required for iSCSI environment, with the following exception: VCM bit in DMX and ACLX bit in Symmetrix VMAX is required to enable theiSCSI initiator access login and, optionally, the iSCSI Challenge Handshake Authentication Protocol (CHAP) security configuration.

For Symmetrix DMX volume masking (VCM), please enable the VCM bit. For Symmetrix VMAX volume masking, please enable ACLX bit. For allSymmetrix arrays, Cluster configurations require the same underlying Operating System director bits noted here in addition to any noted in the ClusterSoftware table.

No. Operating System TopologyRequired Director Bit

SettingOptional Director

Bit SettingStorage Operating

EnvironmentStorageArray Comments

1 Asianux AX [32-Bit] 2.0: GA86, 87,SP182, 83, SP281, 84, SP352, 53;

Asianux AX [32-Bit] 3.0: SP140, 79,SP339, 40, SP45, 6;

Asianux AX [32-Bit]: 3.040, 78, 4.0SP114, 15, 4.0 SP214, 131, 4.014, 29;

Asianux AX [IA64] 2.0: GA86, 88, SP182,83;

Asianux AX [IA64]: 3.0 SP140, 79, 3.040,78;

Asianux AX [x86_64] 2.0: GA86, 87,SP182, 83, SP280, 81, SP352, 53;

Asianux AX [x86_64] 3.0: SP140, 79,SP339, 40, SP45, 6;

Asianux AX [x86_64]: 3.040, 78, 4.0SP114, 15, 4.0 SP214, 131, 4.014, 29;

Citrix Systems, Inc. XenServer [x86_64]6.1133, 134;Oracle Linux UEK [x86_64]: 5.68, 25,5.78, 23, 5.88, 10, 6.08, 24, 6.18, 22, 6.28,13, 6.38, 101;

Oracle Linux [32-Bit] 4: U4, U5, U6, U7,U848, U935;

Oracle Linux [32-Bit]: 5.08, 5.18, 5.28,5.38, 51, 5.48, 45, 5.58, 44, 5.68, 27, 5.78,21, 5.88, 9;

Oracle Linux [x86_64] 4: U4, U5, U6,U7, U848, U935;

Oracle Linux [x86_64]: 5.08, 5.18, 5.28,5.38, 51, 5.48, 45, 5.58, 44, 5.68, 27, 5.78,21, 5.88;

Red Hat RHEL [32-Bit] 4.0: U2 AS/ES85,U3 AS/ES77, U4 AS/ES76;

Red Hat RHEL [32-Bit]: 4.5 AS/ES70,4.6 AS/ES71, 4.7 AS/ES72, 4.8AS/ES49, 4.9 AS/ES37, 5.0, 5.1, 5.2,5.354, 5.447, 5.543, 5.636, 5.726, 5.812,5.9125, 6.038, 6.128, 6.216, 17, 18, 19, 20,6.3102;

Red Hat RHEL [IA64] 4.0: U2 AS/ES,U3 AS/ES, U4 AS/ES;

Red Hat RHEL [IA64]: 4.5 AS/ES, 4.6AS/ES, 4.7 AS/ES, 4.8 AS/ES49, 4.9AS/ES37, 5.0, 5.1, 5.2, 5.354, 5.447,5.543, 5.636, 5.726;

Red Hat RHEL [IBM Power]: 4.5 AS70,4.6 AS71, 4.7 AS, 4.8 AS49, 4.9 AS37,5.073, 5.174, 5.275, 5.354, 5.447, 5.543,

FC-AL3;FC-SW

(C) Common Serial Number7;(D) Disable Queue Reset onUnit Attention; (EAN) EnableAuto Negotiation; (PP)Enable Point-to-point; (SC3)SCSI-3 compliance; (SPC-2)SPC-2 compliance; (UWN)Unique World Wide Name

(ACLX) Initiator Group4;(OS2007) Host SCSICompliance 2007

EMC Enginuity 5876:.82.57, .85.59, .159.102

EMCSymmetrixVMAX1, 2

Director Bit/Flag Information 4

6.038;

Red Hat RHEL [s390-31-Bit] 4.0: U2AS66, 67, U3 AS/ES66, 68, U4 AS/ES66,69;

Red Hat RHEL [s390-31-Bit]: 4.5AS/ES70, 4.6 AS/ES66, 71, 4.7 AS/ES66,72;

Red Hat RHEL [s390x-64-Bit] 4.0: U2AS66, 67, U3 AS/ES66, 68, U4 AS/ES66,69;

Red Hat RHEL [s390x-64-Bit]: 4.5AS/ES70, 4.6 AS/ES66, 71, 4.7 AS/ES66,72, 5.0 AS/ES73, 5.1 AS/ES74, 5.275;

Red Hat RHEL [x86_64] 4.0: U2 AS/ES,U3 AS/ES, U4 AS/ES;

Red Hat RHEL [x86_64]: 4.5 AS/ES, 4.6AS/ES, 4.7 AS/ES, 4.8 AS/ES49, 4.9AS/ES37, 5.0, 5.1, 5.2, 5.354, 5.447,5.543, 5.636, 5.726, 5.812, 5.9125, 6.038,6.128, 6.216, 17, 18, 19, 20, 6.3102;

SUSE SLES [32-Bit]: 10, 10 SP131, 59,10 SP231, 60, 10 SP330, 31, 33, 46, 10SP430, 31, 32, 33, 11 SP141, 42, 11SP211, 1150, 9 SP355, 58, 9 SP455;

SUSE SLES [IA64]: 10, 10 SP1, 10SP2, 10 SP346, 10 SP432, 11 SP141,1150, 9 SP355, 9 SP455, 56;

SUSE SLES [IBM Power] 10: SP162,SP2, SP346, SP432;

SUSE SLES [IBM Power]: 1061, 11SP141, 1150, 9 SP355, 57, 9 SP455, 56;

SUSE SLES [s390-31-Bit]: 10 SP162,1061, 9 SP3 v2.6.5-7.24455, 9 SP3+v2.6.5-7.25255, 9 SP455, 56;

SUSE SLES [s390x-64-Bit] 10: SP162,63, 64, SP263, 64, 65;

SUSE SLES [s390x-64-Bit]: 1061, 63, 64,9 SP3 v2.6.5-7.24455, 9 SP3+v2.6.5-7.25255, 9 SP455, 56;

SUSE SLES [x86_64]: 10, 10 SP131, 59,10 SP231, 60, 10 SP330, 31, 33, 46, 10SP430, 31, 32, 33, 34, 11 SP141, 42, 11SP211, 1150, 9 SP355, 9 SP455

2 Asianux AX [32-Bit] 2.0: GA86, 87,SP182, 83, SP281, 84, SP352, 53;

Asianux AX [32-Bit] 3.0: SP140, 79,SP339, 40, SP45, 6;

Asianux AX [32-Bit]: 3.040, 78, 4.0SP114, 15, 4.0 SP214, 131, 4.014, 29;

Asianux AX [IA64] 2.0: GA86, 88, SP182,83;

Asianux AX [IA64]: 3.0 SP140, 79, 3.040,78;

Asianux AX [x86_64] 2.0: GA86, 87,SP182, 83, SP280, 81, SP352, 53;

Asianux AX [x86_64] 3.0: SP140, 79,SP339, 40, SP45, 6;

Asianux AX [x86_64]: 3.040, 78, 4.0SP114, 15, 4.0 SP214, 131, 4.014, 29;

Citrix Systems, Inc. XenServer [x86_64]6.1133, 134;Oracle Linux: UEK [x86_64] 5.88, 10,[32-Bit] 4 U4, [32-Bit] 4 U5, [32-Bit] 4U6, [32-Bit] 4 U7, [32-Bit] 4 U848,[32-Bit] 4 U935, [32-Bit] 5.08, [32-Bit]5.18, [32-Bit] 5.28, [32-Bit] 5.38, 51,[32-Bit] 5.48, 45, [32-Bit] 5.58, 44, [32-Bit]5.68, 27, [32-Bit] 5.78, 21, [32-Bit] 5.88, 9,[x86_64] 4 U4, [x86_64] 4 U5, [x86_64]4 U6, [x86_64] 4 U7, [x86_64] 4 U848,[x86_64] 4 U935, [x86_64] 5.08,[x86_64] 5.18, [x86_64] 5.28, [x86_64]5.38, 51, [x86_64] 5.48, 45, [x86_64] 5.58,

FC-AL3;FC-SW

(C) Common Serial Number;(D) Disable Queue Reset onUnit Attention; (EAN) EnableAuto Negotiation; (PP)Enable Point-to-point; (SC3)SCSI-3 compliance; (SPC-2)SPC-2 compliance; (UWN)Unique World Wide Name

(ACLX) Initiator Group;(OS2007) Host SCSICompliance 2007

EMC Enginuity 5874:.121.102, .122.103,.123.104, .157.129,.207.166, .210.168,.229.182, .230.183,.240.191, .241.191,.242.191, .248.194,269.204, .259.201


Director Bit/Flag Information


44, [x86_64] 5.68, 27, [x86_64] 5.78, 21,[x86_64] 5.88;


Red Hat RHEL [32-Bit]: 4.5 AS/ES70,4.6 AS/ES71, 4.7 AS/ES72, 4.8AS/ES49, 4.9 AS/ES37, 5.0, 5.1, 5.2,5.354, 5.447, 5.543, 5.636, 5.726, 5.812,5.9125, 6.038, 6.128, 6.216, 17, 18, 19, 20,6.3102;


Red Hat RHEL [IA64]: 4.5 AS/ES, 4.6AS/ES, 4.7 AS/ES, 4.8 AS/ES49, 4.9AS/ES37, 5.0, 5.1, 5.2, 5.354, 5.447,5.543, 5.636, 5.726;

Red Hat RHEL [IBM Power]: 4.5 AS70,4.6 AS71, 4.7 AS, 4.8 AS49, 4.9 AS37,5.073, 5.174, 5.275, 5.354, 5.447, 5.543,6.038;



Red Hat RHEL [s390x-64-Bit] 4.0: U2AS66, 67, U3 AS/ES66, 68, U4 AS/ES66,69;



Red Hat RHEL [x86_64]: 4.5 AS/ES, 4.6AS/ES, 4.7 AS/ES, 4.8 AS/ES49, 4.9AS/ES37, 5.0, 5.1, 5.2, 5.354, 5.447,5.543, 5.636, 5.726, 5.812, 5.9125, 6.038,6.128, 6.216, 17, 18, 19, 20, 6.3102;

SUSE SLES [32-Bit]: 10, 10 SP131, 59,10 SP231, 60, 10 SP330, 31, 33, 46, 10SP430, 31, 32, 33, 11 SP141, 42, 11SP211, 1150, 9 SP355, 58, 9 SP455;







SUSE SLES [x86_64]: 10, 10 SP131, 59,10 SP231, 60, 10 SP330, 31, 33, 46, 10SP430, 31, 32, 33, 34, 11 SP141, 42, 11SP211, 1150, 9 SP355, 9 SP455

3 Asianux AX [32-Bit] 4.0: SP114, 15,SP214, 131;

Asianux AX: [32-Bit] 4.014, 29, [x86_64]4.0 SP114, 15, [x86_64] 4.0 SP214, 131,[x86_64] 4.014, 29;

Citrix Systems, Inc. XenServer [x86_64]6.1133, 134;Oracle Linux: UEK [x86_64] 5.88, 10,[32-Bit] 5.68, 27, [32-Bit] 5.78, 21, [32-Bit]5.88, 9, [x86_64] 5.68, 27, [x86_64] 5.78,21, [x86_64] 5.88;

FC-AL3;FC-SW



EMC Enginuity 5875:.135.91, .139.93,.198.148, .231.172,.249.188, .267.201,.269.201, .286.218





Red Hat RHEL [32-Bit]: 4.5 AS/ES70,4.6 AS/ES71, 4.7 AS/ES72, 4.8AS/ES49, 4.9 AS/ES37, 5.354, 5.447,5.543, 5.636, 5.726, 5.812, 5.9125, 6.038,6.128, 6.216, 17, 18, 19, 20, 6.3102;


Red Hat RHEL [IA64]: 4.5 AS/ES, 4.6AS/ES, 4.7 AS/ES, 4.8 AS/ES49, 4.9AS/ES37;


Red Hat RHEL [x86_64]: 4.5 AS/ES, 4.6AS/ES, 4.7 AS/ES, 4.8 AS/ES49, 4.9AS/ES37, 5.354, 5.447, 5.543, 5.636,5.726, 5.812, 5.9125, 6.038, 6.128, 6.216,17, 18, 19, 20, 6.3102;

SUSE SLES [32-Bit] 10: SP231, 60,SP330, 31, 33, 46, SP430, 31, 32, 33;

SUSE SLES [32-Bit] 11: SP141, 42,SP211;

SUSE SLES [32-Bit]: 1150, 9 SP355, 58,9 SP455;

SUSE SLES [x86_64] 10: SP231, 60,SP330, 31, 33, 46, SP430, 31, 32, 33, 34;

SUSE SLES [x86_64] 11: SP141, 42,SP211;

SUSE SLES [x86_64]: 1150, 9 SP355, 9SP455

4 Egenera BladeFrame SW: 5.2, 5.2.2,5.2.3

FC-AL3;FC-SW

(ACLX) Initiator Group; (C)Common Serial Number7; (D)Disable Queue Reset on UnitAttention; (LOOP ID) LoopID107; (NP) Hard AddressingNon-participate; (OS2007)Host SCSI Compliance 2007;(OVMS) Open VMS; (PP)Enable Point-to-point; (SC3)SCSI-3 compliance; (SPC-2)SPC-2 compliance; (UWN)Unique World Wide Name;(V) Enable Volume SetAddressing

(ACLX) Initiator Group;(D) Disable QueueReset on Unit Attention;(EAN) Enable AutoNegotiation; (OS2007)Host SCSI Compliance2007; (SC3) SCSI-3compliance95; (SPC-2)SPC-2 compliance96

EMC Enginuity 5875:.135.91, .139.93,.198.148, .231.172,.249.188, .267.201,.269.201, .286.218


5 Egenera BladeFrame SW: 5.2, 5.2.2,5.2.3

FC-AL3;FC-SW

(C) Common Serial Number;(D) Disable Queue Reset onUnit Attention; (SC3) SCSI-3compliance; (SPC-2) SPC-2compliance

(OS2007) Host SCSICompliance 2007

EMC Enginuity 5874:.121.102, .122.103,.123.104, .157.129,.207.166, .210.168,.229.182, .230.183,.240.191, .241.191,.242.191, .248.194,269.204, .259.201


6 Hewlett Packard HP-UX 11i v3 (HP-UX11.31)

FC-AL (C) Common Serial Number;(LOOP ID) Loop ID; (NP)Hard AddressingNon-participate; (SPC-2)SPC-2 compliance; (UWN)Unique World Wide Name;(V) Enable Volume SetAddressing

(ACLX) Initiator Group;(EAN) Enable AutoNegotiation; (OS2007)Host SCSI Compliance2007; (SC3) SCSI-3compliance

EMC Enginuity 5876:.82.57, .85.59, .159.102

EMCSymmetrixVMAX


FC-SW (C) Common Serial Number;(LOOP ID) Loop ID; (NP)Hard AddressingNon-participate; (PP) EnablePoint-to-point; (SPC-2)SPC-2 compliance; (UWN)Unique World Wide Name;(V) Enable Volume SetAddressing

(ACLX) Initiator Group;(EAN) Enable AutoNegotiation; (OS2007)Host SCSI Compliance2007

EMC Enginuity 5874:.121.102, .122.103,.123.104, .157.129,.207.166, .210.168,.229.182, .230.183,.240.191, .241.191,.242.191, .248.194,269.204, .259.201



FC-SW (C) Common Serial Number;(PP) Enable Point-to-point;(SPC-2) SPC-2 compliance;(UWN) Unique World WideName; (V) Enable VolumeSet Addressing

(ACLX) Initiator Group;(EAN) Enable AutoNegotiation; (OS2007)Host SCSI Compliance2007; (SC3) SCSI-3compliance

EMC Enginuity 5876:.82.57, .85.59, .159.102

EMCSymmetrixVMAX


FC-SW (C) Common Serial Number;(PP) Enable Point-to-point;(SPC-2) SPC-2 compliance;(UWN) Unique World WideName; (V) Enable Volume

(ACLX) Initiator Group;(EAN) Enable AutoNegotiation; (OS2007)Host SCSI Compliance2007119; (SC3) SCSI-3

EMC Enginuity 5875:.135.91, .139.93,.198.148, .231.172,.249.188, .267.201,.269.201, .286.218




Set Addressing compliance


FCoE (ACLX) Initiator Group; (C)Common Serial Number;(SPC-2) SPC-2 compliance;(UWN) Unique World WideName; (V) Enable VolumeSet Addressing

(OS2007) Host SCSICompliance 2007;(SC3) SCSI-3compliance

EMC Enginuity 5876:.82.57, .85.59, .159.102

EMCSymmetrixVMAX

11 Hewlett Packard HP-UX 11i: v1.0(HP-UX 11.11), v2 (HP-UX 11.23)

FC-AL (C) Common Serial Number;(LOOP ID) Loop ID; (NP)Hard AddressingNon-participate; (UWN)Unique World Wide Name;(V) Enable Volume SetAddressing

(ACLX) Initiator Group;(EAN) Enable AutoNegotiation; (OS2007)Host SCSI Compliance2007; (SC3) SCSI-3compliance90; (SPC-2)SPC-2 compliance

EMC Enginuity 5876:.82.57, .85.59, .159.102

EMCSymmetrixVMAX


FC-SW (C) Common Serial Number;(LOOP ID) Loop ID; (NP)Hard AddressingNon-participate; (PP) EnablePoint-to-point; (UWN) UniqueWorld Wide Name; (V)Enable Volume SetAddressing

(ACLX) Initiator Group;(EAN) Enable AutoNegotiation; (OS2007)Host SCSI Compliance2007; (SPC-2) SPC-2compliance

EMC Enginuity 5874:.121.102, .122.103,.123.104, .157.129,.207.166, .210.168,.229.182, .230.183,.240.191, .241.191,.242.191, .248.194,269.204, .259.201



FC-SW (C) Common Serial Number;(PP) Enable Point-to-point;(UWN) Unique World WideName; (V) Enable VolumeSet Addressing

(ACLX) Initiator Group;(EAN) Enable AutoNegotiation; (OS2007)Host SCSI Compliance2007; (SC3) SCSI-3compliance90; (SPC-2)SPC-2 compliance

EMC Enginuity 5876:.82.57, .85.59, .159.102

EMCSymmetrixVMAX


FC-SW (C) Common Serial Number;(PP) Enable Point-to-point;(UWN) Unique World WideName; (V) Enable VolumeSet Addressing


EMC Enginuity 5875:.135.91, .139.93,.198.148, .231.172,.249.188, .267.201,.269.201, .286.218



FCoE (ACLX) Initiator Group; (C)Common Serial Number;(UWN) Unique World WideName; (V) Enable VolumeSet Addressing

(OS2007) Host SCSICompliance 200789;(SC3) SCSI-3compliance90; (SPC-2)SPC-2 compliance

EMC Enginuity 5876:.82.57, .85.59, .159.102

EMCSymmetrixVMAX

16 Hewlett Packard Open VMS: V7.3-2,V8.2, V8.2-1, V8.3, V8.3-1H1

FC-SW (OVMS) Open VMS; (PP)Enable Point-to-point; (SC3)SCSI-3 compliance; (UWN)Unique World Wide Name


EMC Enginuity 5874:.121.102, .122.103,.123.104, .157.129,.207.166, .210.168,.229.182, .230.183,.240.191, .241.191,.242.191, .248.194,.259.201, 269.204; EMCEnginuity 5876: .82.57,.85.59, .159.102


17 Hewlett Packard Open VMS: V7.3-2,V8.2, V8.2-1, V8.3, V8.3-1H1

FC-SW (OVMS) Open VMS; (PP)Enable Point-to-point; (SC3)SCSI-3 compliance; (UWN)Unique World Wide Name

(ACLX) Initiator Group;(EAN) Enable AutoNegotiation; (OS2007)Host SCSI Compliance2007; (SPC-2) SPC-2compliance96

EMC Enginuity 5875:.135.91, .139.93,.198.148, .231.172,.249.188, .267.201,.269.201, .286.218


18 Hewlett Packard Tru64 UNIX: V5.1B-0,V5.1B-1, V5.1B-292, V5.1B-3,V5.1B-494, V5.1B-593, V5.1B-691

FC-SW (OVMS) Open VMS; (PP)Enable Point-to-point; (UWN)Unique World Wide Name


EMC Enginuity 5874:.121.102, .122.103,.123.104, .157.129,.207.166, .210.168,.229.182, .230.183,.240.191, .241.191,.242.191, .248.194,.259.201, 269.204; EMCEnginuity 5876: .82.57,.85.59, .159.102


19 Hewlett Packard Tru64 UNIX: V5.1B-0,V5.1B-1, V5.1B-292, V5.1B-3,V5.1B-494, V5.1B-593, V5.1B-691

FC-SW (OVMS) Open VMS; (PP)Enable Point-to-point; (UWN)Unique World Wide Name

(ACLX) Initiator Group;(EAN) Enable AutoNegotiation; (OS2007)Host SCSI Compliance2007; (SPC-2) SPC-2compliance96

EMC Enginuity 5875:.135.91, .139.93,.198.148, .231.172,.249.188, .267.201,.269.201, .286.218


20 IBM AIX: 5.2, 5.3, 6.1, 7.1 FC-AL3;FC-SW

(C) Common Serial Number7;(LOOP ID) Loop ID107;(OS2007) Host SCSICompliance 2007; (PP)Enable Point-to-point; (SC3)SCSI-3 compliance; (SPC-2)SPC-2 compliance; (UWN)Unique World Wide Name

(ACLX) Initiator Group;(EAN) Enable AutoNegotiation; (SC3)SCSI-3 compliance95;(SPC-2) SPC-2compliance96

EMC Enginuity 5875:.135.91, .139.93,.198.148, .231.172,.249.188, .267.201,.269.201, .286.218


21 IBM AIX: 5.2, 5.3, 6.1, 7.1 FC-AL3;FC-SW

(EAN) Enable AutoNegotiation; (OS2007) HostSCSI Compliance 2007; (PP)Enable Point-to-point; (SC3)SCSI-3 compliance95;(SPC-2) SPC-2compliance96; (UWN) UniqueWorld Wide Name

(ACLX) Initiator Group;(C) Common SerialNumber7; (LOOP ID)Loop ID; (NP) HardAddressingNon-participate

EMC Enginuity 5876:.82.57, .85.59, .159.102

EMCSymmetrixVMAX



22 IBM AIX: 5.2, 5.3, 6.1, 7.1;

IBM VIOS: 2.1, 2.1.0.10, 2.1.1,2.1.1.10-FP21, 2.1.2.10-FP22,2.1.2.12-FP22.1, 2.1.2.13-FP22.1SP-02, 2.1.3.10-FP23, 2.2.0.10-FP24,2.2.0.11-FP24-SP01,2.2.0.12-FP24-SP02,2.2.0.13-FP24-SP03

FC-AL3;FC-SW

(C) Common Serial Number7;(FA LOOP ID) FA LoopID107; (OS2007) Host SCSICompliance 2007; (PP)Enable Point-to-point; (SC3)SCSI-3 compliance; (SPC-2)SPC-2 compliance; (UWN)Unique World Wide Name

(ACLX) Initiator Group;(EAN) Enable AutoNegotiation; (SC3)SCSI-3 compliance95;(SPC-2) SPC-2compliance96

EMC Enginuity 5874:.121.102, .122.103,.123.104, .157.129,.207.166, .210.168,.229.182, .230.183,.240.191, .241.191,.242.191, .248.194,269.204, .259.201


23 IBM IBM i: 7.1113, i6.1.1114;

IBM i5/OS [System i]: V5R4M5112,V6R1/i6.1

FC-AL (AS4) AS/400 Ports Only;(EAN) Enable AutoNegotiation; (UWN) UniqueWorld Wide Name; (V)Enable Volume SetAddressing

(ACLX) Initiator Group EMC Enginuity 5874:.121.102, .122.103,.123.104, .157.129,.207.166, .210.168,.229.182, .230.183,.240.191, .241.191,.242.191, .248.194,.259.201, 269.204; EMCEnginuity 5875: .135.91,.139.93, .198.148,.231.172, .249.188,.267.201, .269.201,.286.218


24 IBM IBM i: 7.1113, i6.1.1114;

IBM i5/OS [System i]: V5R4M5112,V6R1/i6.1

FC-SW (AS4) AS/400 Ports Only;(EAN) Enable AutoNegotiation; (PP) EnablePoint-to-point; (UWN) UniqueWorld Wide Name; (V)Enable Volume SetAddressing

(ACLX) Initiator Group EMC Enginuity 5874:.121.102, .122.103,.123.104, .157.129,.207.166, .210.168,.229.182, .230.183,.240.191, .241.191,.242.191, .248.194,.259.201, 269.204; EMCEnginuity 5875: .135.91,.139.93, .198.148,.231.172, .249.188,.267.201, .269.201,.286.218


25 IBM VIOS: 2.1, 2.1.0.10, 2.1.1,2.1.1.10-FP21, 2.1.2.10-FP22,2.1.2.12-FP22.1, 2.1.2.13-FP22.1SP-02, 2.1.3.10-FP23, 2.2.0.10-FP24,2.2.0.11-FP24-SP01,2.2.0.12-FP24-SP02,2.2.0.13-FP24-SP03

FC-AL3;FC-SW

(C) Common Serial Number7;(LOOP ID) Loop ID107;(OS2007) Host SCSICompliance 2007; (PP)Enable Point-to-point; (SC3)SCSI-3 compliance; (SPC-2)SPC-2 compliance; (UWN)Unique World Wide Name

(ACLX) Initiator Group;(EAN) Enable AutoNegotiation; (OS2007)Host SCSI Compliance2007; (SC3) SCSI-3compliance95; (SPC-2)SPC-2 compliance96

EMC Enginuity 5875:.135.91, .139.93,.198.148, .231.172,.249.188, .267.201,.269.201, .286.218


26 Microsoft Windows 2003 Unified DataStorage Server [x64]: Enterprise EditionSP2, Standard Edition SP2;

Microsoft Windows 2003 [IA64]:DataCenter SP2, Enterprise EditionSP2, Standard Edition SP2;

Microsoft Windows 2003 [x64]DataCenter: R2 SP2, SP2;

Microsoft Windows 2003 [x64]Enterprise Edition: R2 SP2, SP2;

Microsoft Windows 2003 [x64] StandardEdition: R2 SP2, SP2;

Microsoft Windows 2003 [x64] StorageServer Enterprise Edition: R2 SP2, SP2;

Microsoft Windows 2003 [x64] StorageServer Standard Edition: R2 SP2, SP2;





Microsoft Windows 2003 [x86] StorageServer: R2 SP2, SP2

FC-AL3;FC-SW

(C) Common Serial Number;(OS2007) Host SCSICompliance 2007; (SC3)SCSI-3 compliance; (SPC-2)SPC-2 compliance

EMC Enginuity 5874:.121.102, .122.103,.123.104, .157.129,.207.166, .210.168,.229.182, .230.183,.240.191, .241.191,.242.191, .248.194,269.204, .259.201






FC-AL3;FC-SW


(ACLX) Initiator Group;(EAN) Enable AutoNegotiation; (UWN)Unique World WideName

EMC Enginuity 5876:.82.57, .85.59, .159.102











Microsoft Windows 2003 [x86] StorageServer: R2 SP2, SP2;

Microsoft Windows 2008 R2 SP1 [x64]:DataCenter, Enterprise Edition,Standard Edition, Storage Server;

Microsoft Windows 2008 R2: [IA64] forItanium-Based Systems, [x64]DataCenter, [x64] Enterprise Edition,[x64] Standard Edition;

Microsoft Windows 2008 [IA64] forItanium-Based: Systems, Systems SP2;

Microsoft Windows 2008 [x64]:DataCenter, DataCenter SP2,Enterprise Edition, Enterprise EditionSP2, Standard Edition, Standard EditionSP2, Web Server;


Microsoft Windows Server 2012126, 127,128, 129, 130












Microsoft Windows 2003 [x86] StorageServer: R2 SP2, SP2;

Microsoft Windows 2008 R2 SP1 [x64]:DataCenter, Enterprise Edition,Standard Edition, Storage Server;

Microsoft Windows 2008 R2: [IA64] forItanium-Based Systems, [x64]

FC-AL3;FC-SW

(C) Common Serial Number7;(OS2007) Host SCSICompliance 2007; (SC3)SCSI-3 compliance; (SPC-2)SPC-2 compliance


EMC Enginuity 5875:.135.91, .139.93,.198.148, .231.172,.249.188, .267.201,.269.201, .286.218




DataCenter, [x64] Enterprise Edition,[x64] Standard Edition;





29 Microsoft Windows 2008 R2 SP1 [x64]:DataCenter, Enterprise Edition,Standard Edition, Storage Server;

Microsoft Windows 2008 R2: [IA64] forItanium-Based Systems, [x64]DataCenter, [x64] Enterprise Edition,[x64] Standard Edition;





FC-AL3;FC-SW



EMC Enginuity 5874:.121.102, .122.103,.123.104, .157.129,.207.166, .210.168,.229.182, .230.183,.240.191, .241.191,.242.191, .248.194,269.204, .259.201


30 Novell Netware 6.5: SP5, SP6, SP7,SP8

FC-AL3;FC-SW

(ACLX) Initiator Group; (C)Common Serial Number; (D)Disable Queue Reset on UnitAttention; (EAN) Enable AutoNegotiation; (PP) EnablePoint-to-point; (SC3) SCSI-3compliance; (SPC-2) SPC-2compliance; (UWN) UniqueWorld Wide Name


EMC Enginuity 5875:.135.91, .139.93,.198.148, .231.172,.249.188, .267.201,.269.201, .286.218


See108, 109,110, 111

31 Novell Netware 6.5: SP5, SP6, SP7,SP8

FC-AL3;FC-SW

(C) Common Serial Number;(D) Disable Queue Reset onUnit Attention132; (SC3)SCSI-3 compliance; (SPC-2)SPC-2 compliance

EMC Enginuity 5874:.121.102, .122.103,.123.104, .157.129,.207.166, .210.168,.229.182, .230.183,.240.191, .241.191,.242.191, .248.194,269.204, .259.201


See108, 109,110, 111

32 Oracle Linux [32-Bit] 4: U4, U5, U6, U7,U848, U935;

Oracle Linux [32-Bit]: 5.08, 5.18, 5.28,5.38, 51, 5.48, 45, 5.58, 44;

Oracle Linux [x86_64] 4: U4, U5, U6,U7, U848, U935;

Oracle Linux [x86_64]: 5.08, 5.18, 5.28,5.38, 51, 5.48, 45, 5.58, 44;

Red Hat RHEL [32-Bit]: 5.0, 5.1, 5.2;

Red Hat RHEL [IA64]: 5.0, 5.1, 5.2,5.354, 5.447, 5.543, 5.636, 5.726;

Red Hat RHEL [IBM Power]: 4.5 AS70,4.6 AS71, 4.7 AS, 4.8 AS49, 4.9 AS37,5.073, 5.174, 5.275, 5.354, 5.447, 5.543,6.038;



Red Hat RHEL [s390x-64-Bit] 4.0: U2

FC-AL3;FC-SW

(C) Common Serial Number7;(D) Disable Queue Reset onUnit Attention; (PP) EnablePoint-to-point; (SC3) SCSI-3compliance; (SPC-2) SPC-2compliance; (UWN) UniqueWorld Wide Name


EMC Enginuity 5875:.135.91, .139.93,.198.148, .231.172,.249.188, .267.201,.269.201, .286.218




AS66, 67, U3 AS/ES66, 68, U4 AS/ES66,69;


Red Hat RHEL [x86_64]: 5.0, 5.1, 5.2;

SUSE SLES [32-Bit]: 10, 10 SP131, 59;







SUSE SLES [x86_64]: 10, 10 SP131, 5933 Oracle Linux UEK [x86_64]: 5.68, 25,

5.78, 23, 6.08, 24, 6.18, 22, 6.28, 13, 6.38,101

FC-AL3;FC-SW

(C) Common Serial Number;(D) Disable Queue Reset onUnit Attention; (EAN) EnableAuto Negotiation; (PP)Enable Point-to-point; (SC3)SCSI-3 compliance; (SPC-2)SPC-2 compliance; (UWN)Unique World Wide Name


EMC Enginuity 5874:.121.102, .122.103,.123.104, .157.129,.207.166, .210.168,.229.182, .230.183,.240.191, .241.191,.242.191, .248.194,269.204, .259.201


34 Oracle Linux UEK [x86_64]: 5.68, 25,5.78, 23, 6.08, 24, 6.18, 22, 6.28, 13, 6.38,101

FC-AL3;FC-SW



EMC Enginuity 5875:.135.91, .139.93,.198.148, .231.172,.249.188, .267.201,.269.201, .286.218


35 Oracle Solaris 10: SPARC118, x86116,117;

Oracle Solaris 11: SPARC104, x86105;

Oracle Solaris 9 SPARC115

FC-AL3;FC-SW

(C) Common Serial Number;(UWN) Unique World WideName

(ACLX) Initiator Group;(D) Disable QueueReset on Unit Attention;(EAN) Enable AutoNegotiation; (OS2007)Host SCSI Compliance2007103; (PP) EnablePoint-to-point; (SC3)SCSI-3 compliance95;(SPC-2) SPC-2compliance96

EMC Enginuity 5874:.121.102, .122.103,.123.104, .157.129,.207.166, .210.168,.229.182, .230.183,.240.191, .241.191,.242.191, .248.194,269.204, .259.201


36 Oracle Solaris 10: SPARC118, x86116,117;

Oracle Solaris 11: SPARC104, x86105;

Oracle Solaris 9 SPARC115

FC-AL3;FC-SW

(C) Common Serial Number;(UWN) Unique World WideName

(ACLX) Initiator Group;(D) Disable QueueReset on Unit Attention;(EAN) Enable AutoNegotiation; (OS2007)Host SCSI Compliance2007103; (SC3) SCSI-3compliance95; (SPC-2)SPC-2 compliance96

EMC Enginuity 5875:.135.91, .139.93,.198.148, .231.172,.249.188, .267.201,.269.201, .286.218; EMCEnginuity 5876: .82.57,.85.59, .159.102


37 VMware ESX: 4.0 (vSphere 4)97, 99, 120,4.1 (vSphere 4)97, 99, 100, 120, 121, 122,123, 124;

VMware ESXi: 4.0 (vSphere 4)97, 99,120, 4.1 (vSphere 4)97, 99, 100, 120, 121,122, 123, 124, 5.0 (vSphere 5)97, 98, 99,100, 106, 5.1(vSphere 5.1)97, 98, 99, 100

FC-AL3;FC-SW

(C) Common Serial Number;(SC3) SCSI-3 compliance;(SPC-2) SPC-2 compliance


EMC Enginuity 5875:.135.91, .139.93,.198.148, .231.172,.249.188, .267.201,.269.201, .286.218


38 VMware ESX: 4.0 (vSphere 4)97, 99, 120,4.1 (vSphere 4)97, 99, 100, 120, 121, 122,123, 124;

VMware ESXi: 4.0 (vSphere 4)97, 99,120, 4.1 (vSphere 4)97, 99, 100, 120, 121,122, 123, 124, 5.0 (vSphere 5)97, 98, 99,100, 106, 5.1(vSphere 5.1)97, 98, 99, 100

FC-AL3;FC-SW

(C) Common Serial Number;(SC3) SCSI-3 compliance;(SPC-2) SPC-2 compliance

(ACLX) Initiator Group;(OS2007) Host SCSICompliance 2007; (PP)Enable Point-to-point

EMC Enginuity 5874:.121.102, .122.103,.123.104, .157.129,.207.166, .210.168,.229.182, .230.183,.240.191, .241.191,.242.191, .248.194,269.204, .259.201


39 VMware: ESX 3.597, ESXi 3.597 FC-AL3;FC-SW

(C) Common Serial Number;(SPC-2) SPC-2 compliance

(OS2007) Host SCSICompliance 2007;(SC3) SCSI-3compliance

EMC Enginuity 5874:.121.102, .122.103,.123.104, .157.129,.207.166, .210.168,.229.182, .230.183,.240.191, .241.191,




.242.191, .248.194,269.204, .259.201

1. Starting with 5874.249.195.7 (defined in opt 351117) configurations that require AS400 or IBM i device (2107-Axx) mapping to a Symmetrix host adapter can be mixed on the portor on the processor with open systems Gatekeeper devices. The preferred configuration method is to use the port flag ACLX with required device masking.

2. Prior to 5874.249.195.7, an RPQ is required for open systems Gatekeeper devices to be mixed on the same processor with AS400/IBM i devices.3. Direct connect only, no hubs.4. Highly recommended to be used.5. Includes HanCom Asianux Server, Red Flag Asianux Server, and Asianux Server 3 == MIRACLE LINUX V5 releases.6. Supported kernels: 2.6.18-238.2.AXS3, 2.6.18-274.1.AXS3, 2.6.18-274.2.AXS3, 2.6.18-274.3.AXS3, 2.6.18-274.5.AXS3, 2.6.18-274.6.AXS3, kernel-2.6.18-308.1.AXS3,

kernel-2.6.18-308.3.AXS3, kernel-2.6.18-308.4.AXS3, kernel-2.6.18-308.5.AXS3. Confirm kernel support with server vendor.7. C Bit required for VERITAS VxVM DMP functionality.8. When the Red Hat stock kernel is used under Oracle Linux, use the RHEL equivalent for supported configurations. Please refer to Primus emc310005 for additional detail.9. Supported kernels: 2.6.18-308.0.0.0.1.el5, 2.6.18-308.8.2.0.1.el5, 2.6.18-308.13.1.0.1.el5, 2.6.18-308.16.1.0.1.el5. Confirm kernel support with server vendor.10. Supported kernels: 2.6.32-300.10.1.el5uek, 2.6.32-300.11.1.el5uek, 2.6.32-300.20.1.el5uek, 2.6.32-300.21.1.el5uek, 2.6.32-300.24.1.el5uek, 2.6.32-300.25.1.el5uek,

2.6.32-300.27.1.el5uek, 2.6.32-300.32.1.el5uek, 2.6.32-300.32.2.el5uek, 2.6.32-300.32.3.el5uek, 2.6.32-300.37.1.el5uek, 2.6.32-300.38.1.el5uek, 2.6.32-300.39.1.el5uek.Confirm kernel support with server vendor.

11. Supported kernels:3.0.13-0.27, 3.0.26-0.7, 3.0.31-0.9, 3.0.34-0.7.9, 3.0.38-0.5.1, 3.0.42-0.7.3, 3.0.51-0.7.9.1. Confirm kernel support with server vendor.12. Supported kernels:2.6.18-308.el5, 2.6.18-308.1.1.el5, 2.6.18-308.4.1.el5, 2.6.18-308.8.1.el5, 2.6.18-308.8.2.el5, 2.6.18-308.11.1.el5, 2.6.18-308.13.1.el5, 2.6.18-308.16.1.el5,

2.6.18-308.20.1.el5, 2.6.18-308.24.1.el5. Confirm kernel support with server vendor.13. Supported kernels: 2.6.32-300.3.1.el6uek, 2.6.32-300.4.1.el6uek, 2.6.32-300.7.1.el6uek, 2.6.32-300.11.1.el6uek, 2.6.32-300.20.1.el6uek, 2.6.32-300.21.1.el6uek,

2.6.32-300.24.1.el6uek, 2.6.32-300.25.1.el6uek, 2.6.32-300.27.1.el6uek, 2.6.32-300.32.1.el6uek, 2.6.32-300.32.2.el6uek, 2.6.32-300.32.3.el6uek, 2.6.32-300.37.1.el6uek,2.6.32-300.38.1.el6uek, 2.6.32-300.38.1.el6uek, 2.6.32-300.39.1.el6uek. Confirm kernel support with server vendor.

14. Asianux includes separate releases from Redflag DC Server, Miracle Linux and HanCom Linux Server. Each individual distribution is released asynchronous of the other. Pleasereview the individual distributors release to ensure the availabilty of that desired release.

15. Supported kernels: 2.6.32-131.12.1.el6, kernel-2.6.32-131.17.1.el6, kernel-2.6.32-220.4.1.el6, kernel-2.6.32-220.7.1.el6, kernel-2.6.32-220.13.1.el6, kernel-2.6.32-220.23.1.el6,kernel-2.6.32-279.AXS4, kernel-2.6.32-279.2.1.el6, kernel-2.6.32-279.5.1.el6 Confirm kernel support with server vendor.

16. Supported kernels: 2.6.32-220.el6, 2.6.32-220.2.1.el6, 2.6.32-220.4.1.el6, 2.6.32-220.4.2.el6, 2.6.32-220.7.1.el6, 2.6.32-220.13.1.el6, 2.6.32-220.17.1.el6, 2.6.32-220.23.1.el6.Confirm kernel support with server vendor.

17. RHEL KVM is supported. Refer to the Virtualization Hosting Server (Parent) Solutions table for supported configurations. Consult the EMC Host Connectivity Guide for Linux toconfigure PowerPath with RHEL KVM.

18. The LVM included as part of this update is supported and can be used in conjunction with PowerPath emcpower pseudo device file names as well as native sd device file names.19. Native multipathing is supported on boot-from-SAN configurations. Please refer to the operating system vendor's documentation for installation instructions. Also refer to the EMC

Host Connectivity Guide for Linux found on http://powerlink.emc.com for any additional guidance.20. EMC supports the following filesystems: ext2, ext3, ext4, xfs, gfs, and gfs2 unless otherwise noted in the ESM. If there is a customer requirement for a different filesystem, please

submit an RPQ.21. Supported kernels: 2.6.18-274.0.0.0.1.el5, 2.6.18-274.12.1.0.1.el5, 2.6.18-274.17.1.0.1.el5. Confirm kernel support with server vendor.22. Supported kernels: 2.6.32-100.34.1.el6uek. Confirm kernel support with server vendor.23. Supported kernels: 2.6.32-200.13.1.el5uek, 2.6.32-200.16.1.el5uek, 2.6.32-200.19.1.el5uek, 2.6.32-200.20.1.el5uek, 2.6.32-200.23.1.el5uek. Confirm kernel support with

server vendor.24. Supported kernels: 2.6.32-100.28.1.el6, 2.6.32-100.28.9.el6, 2.6.32-100.28.11.el6, 2.6.32-100.28.15.el6, 2.6.32-100.28.17.el6, 2.6.32-100.35.1.el6uek. Confirm kernel

support with server vendor.25. Supported kernels: 2.6.32-100.28.1.el5, 2.6.32-100.28.9.el5, 2.6.32-100.28.11.el5, 2.6.32-100.28.15.el5; 2.6.32-100.28.17.el5, 2.6.32-100.35.1.el5uek. Confirm kernel support

with server vendor.26. Supported kernels: 2.6.18-274.el5, 2.6.18-274.3.1el5, 2.6.18-274.7.1.el5, 2.6.18-274.12.1.el5, 2.6.18-274.17.1.el5, 2.6.18-274.18.1.el5. Confirm kernel support with server vendor.27. Supported kernels: 2.6.18-238.0.1.el5, 2.6.18-238.1.1.0.1.el5, 2.6.18-238.5.1.0.1.el5, 2.6.18-238.9.1.0.1.el5, 2.6.18-238.12.1.0.1.el5. Confirm kernel support with server vendor.28. Supported kernels: 2.6.32-131.0.15.el6, 2.6.32-131.2.1.el6, 2.6.32-131.6.1.el6, 2.6.32-131.12.1.el6, 2.6.32-131.17.1.el6, 2.6.32-131.21.1.el6, 2.6.32-131.25.1.el6,

2.6.32-131.29.1.el6. Confirm kernel support with server vendor.29. Supported kernels: 2.6.32-71.7.1.el6, 2.6.32-71.14.1.el6, 2.6.32-71.18.1.el6, 2.6.32-71.18.2.el6. Confirm kernel support with server vendor.30. Novell OES 2 SP2 is supported with this update.31. Novell OES is only supported with Fibre channel connectivity.32. Supported kernels: 2.6.16.60-0.85.1, 2.6.16.60-0.87.1, 2.6.16.60-0.89.1, 2.6.16.60-0.91.1, 2.6.16.60-0.93.1, 2.6.16.60-0.97.1, 2.6.16.60-0.99.1. Confirm kernel support with server

vendor.33. Novell OES 2 SP3 is supported with this update.34. SLES Xen kernel supported. Refer to the Virtualiztion Hosting Server (Parent) Solutions table for supported configurations.35. Supported kernel : 2.6.9-100.0.0.0.1.EL, 2.6.9-103.0.0.0.1.EL. Confirm kernel support with server vendor.36. Supported kernels: 2.6.18-238.el5, 2.6.18-238.1.1.el5, 2.6.18-238.5.1.el5, 2.6.18-238.9.1.el5, 2.6.18-238.12.1.el5, 2.6.18-238.19.1.el5, 2.6.18-238.21.1.el5, 2.6.18-238.27.1.el5,

2.6.18-238.28.1.el5, 2.6.18-238.31.1.el5, 2.6.18-238.33.1.el5, 2.6.18-238.35.1.el5, 2.6.18-238.37.1.el5, 2.6.18-238.39.1.el5, 2.6.18-238.40.1.el5, 2.6.18-238.44.1.el5,2.6.18-238.45.1.el5. Confirm kernel support with server vendor.

37. Supported kernels: 2.6.9-100.EL; 2.6.9-101.EL, 2.6.9-103.EL. Confirm kernel support with server vendor.38. Supported kernels: 2.6.32-71.el6, 2.6.32-71.7.1.el6, 2.6.32-71.14.1.el6, 2.6.32-71.18.1.el6, 2.6.32-71.18.2.el6, 2.6.32-71.24.1.el6, 2.6.32-71.31.1.el6, 2.6.32-71.34.1.el6,

2.6.32-71.36.1.el6, 2.6.32-71.37.1.el6, 2.6.32-71.38.1.el6. Confirm kernel support with server vendor.39. Supported kernels: 2.6.18-194.1.AXS3, 2.6.18-194.2.AXS3, 2.6.18-194.3.AXS3, 2.6.18-194.4.AXS3, 2.6.18-194.5.AXS3, 2.6.18-194.7.AXS3, 2.6.18-194.8.AXS3,

2.6.18-194.9.AXS3, 2.6.18-194.10.AX3. Confirm kernel support with server vendor.40. Includes Redflag DC Server, Miracle Linux and HanCom Asianux Server.41. Supported kernels: 2.6.32.12-0.7, 2.6.32.13-0.4.1, 2.6.32.13-0.5.1, 2.6.32.19-0.2.1, 2.6.32.19-0.3.1, 2.6.32.23-0.3.1, 2.6.32.24-0.2, 2.6.32.27-0.2.2, 2.6.32.29-0.3.1,

2.6.32.36-0.5.2, 2.6.32.43-0.4.1, 2.6.32.45-0.3.2, 2.6.32.46-0.3.1, 2.6.32.49-0.3.1, 2.6.32.54-0.3, 2.6.32.59-0.3, 2.6.32.59-0.7.1. Confirm kernel support with server vendor.42. Novell OES 11 is supported with this update.43. Supported kernels: 2.6.18-194.el5, 2.6.18-194.3.1.el5, 2.6.18-194.8.1.el5, 2.6.18-194.11.1.el5, 2.6.18-194.11.3.el5, 2.6.18-194.11.4.el5, 2.6.18-194.17.1.el5, 2.6.18-194.17.4.el5,

2.6.18-194.26.1.el5, 2.6.18-194.32.1.el5 Confirm kernel support with server vendor.44. Supported kernels: 2.6.18-194.0.0.0.3.el5, 2.6.18-194.0.0.0.4.el5, 2.6.18-194.3.1.0.1.el5, 2.6.18-194.3.1.0.2.el5, 2.6.18-194.11.4.0.1.el5, 2.6.18-194.8.1.0.1.el5,

2.6.18-194.11.1.0.1.el5, 2.6.18-194.11.3.0.1.el5, 2.6.18-194.11.4.0.1.el5, 2.6.18-194.17.1.0.1.el5, 2.6.18-194.17.1.0.2.el5, 2.6.18-194.17.4.0.1.el5, 2.6.18-194.26.1.0.1.el5,2.6.18-194.32.1.0.1.el5. Confirm kernel support with server vendor.

45. Supported kernels: 2.6.18-164.0.0.0.1.el5, 2.6.18-164.2.1.0.1.el5, 2.6.18-164.6.1.0.1.el5, 2.6.18-164.9.1.0.1.el5, 2.6.18-164.10.1.0.1.el5, 2.6.18-164.11.1.0.1.el5,2.6.18-164.15.1.0.1.el5. Confirm kernel support with server vendor.

46. Supported kernels: 2.6.16.60-0.54.5, 2.6.16.60-0.57.1, 2.6.16.60-0.58.1, 2.6.16.60-0.59.1, 2.6.16.60-0.60.1, 2.6.16.60-0.62.1, 2.6.16.60-0.66.1, 2.6.16.60-0.67.1,2.6.16.60-0.68.1, 2.6.16.60-0.69.1, 2.6.16.60-0.74.7, 2.6.16.60-0.76.8, 2.6.16.60-0.77.1, 2.6.16.60-0.79.1, 2.6.16.60-0.81.2, 2.6.16.60-0.83.2. Confirm kernel support with servervendor.

47. Supported kernels: 2.6.18-164.el5, 2.6.18-164.2.1.el5, 2.6.18-164.6.1.el5, 2.6.18-164.9.1.el5, 2.6.18-164.10.1.el5, 2.6.18-164.11.1.el5, 2.6.18-164.15.1.el5, 2.6.18-164.17.1.el5,2.6.18-164.25.1.el5, 2.6.18-164.25.2.el5. Confirm kernel support with server vendor.

48. Supported kernel : 2.6.9-89.0.0.0.1.EL, 2.6.9-89.0.3.0.1.EL, 2.6.9-89.0.7.0.1.EL, 2.6.9-89.0.9.0.1.EL, 2.6.9-89.0.11.0.1.EL, 2.6.9-89.0.15.0.1.EL, 2.6.9-89.0.16.0.1.EL,2.6.9-89.0.18.0.1.EL, 2.6.9-89.0.19.0.1.EL, 2.6.9-89.0.20.0.1.EL, 2.6.9-89.0.20.0.2.EL, 2.6.9-89.0.23.0.1.EL, 2.6.9-89.0.25.0.1.EL, 2.6.9-89.0.26.0.1.EL, 2.6.9-89.0.28.0.1.EL,2.6.9-89.0.29.0.1.EL, 2.6.9-89.29.1.0.1.EL, 2.6.9-89.31.1.0.1.EL, 2.6.9-89.33.1.0.1.EL 2.6.9-89.35.1.0.1.EL. Confirm kernel support with server vendor.

49. Supported kernels: 2.6.9-89.EL, 2.6.9-89.0.3.EL, 2.6.9-89.0.7.EL, 2.6.9-89.0.9EL, 2.6.9-89.0.11.EL, 2.6.9-89.0.15.EL, 2.6.9-89.0.16.EL, 2.6.9-89.0.18.EL, 2.6.9-89.0.19.EL,2.6.9-89.0.20.EL, 2.6.9-89.0.23.EL, 2.6.9-89.0.25.EL, 2.6.9-89.0.26.EL, 2.6.9-89.0.28.EL, 2.6.9-89.0.29.EL, 2.6.9-89.29.1.EL, 2.6.9-89.31.1.EL, 2.6.9-89.33.1.EL,2.6.9-89.35.1.EL. Confirm kernel support with server vendor.

50. Supported kernels: 2.6.27.19-5.1, 2.6.27.21-0.1.2, 2.6.27.23-0.1, 2.6.27.25-0.1.1 2.6.27.29-0.1.1, 2.6.27.37-0.1.1, 2.6.27.39-0.3.1, 2.6.27.42-0.1.1, 2.6.27.45-0.1.1,2.6.27.48-0.1.1, 2.6.27.48-0.6.1, 2.6.27.48-0.12.1, 2.6.27.54-0.2.1. Confirm kernel support with server vendor.

51. Supported kernel: 2.6.18-128.0.0.0.2.el5, 2.6.18-128.1.1.0.1.el5, 2.6.18-128.1.6.0.1.el5, 2.6.18-128.1.10.0.1.el5, 2.6.18-128.1.14.0.1.el5, 2.6.18-128.1.16.0.1.el5,2.6.18-128.2.1.0.1.el5, 2.6.18-128.4.1.0.1.el5, 2.6.18-128.7.1.0.1.el5. Confirm kernel support with server vendor.

52. Support kernel: 2.6.9-78.8AXS2. Contact server vendor for support.53. Asianux 2.0 SP3 include Redflag DC Server 5.0 SP3, Miracle Linux v4.0 SP3, HanCom 2006 Server Asianux 2.0 SP3.54. Supported kernels: 2.6.18-128.el5, 2.6.18-128.1.1.el5, 2.6.18-128.1.6.el5, 2.6.18-128.1.10.el5, 2.6.18-128.1.14.el5, 2.6.18-128.1.16.el5, 2.6.18-128.2.1.el5, 2.6.18-128.4.1.el5,

2.6.18-128.7.1.el5, 2.6.18-128.17.1.el5, 2.6.18-128.23.1.el5, 2.6.18-128.23.2.el5, 2.6.18-128.26.1.el5. Confirm kernel support with server vendor.55.



In accordance with the SUSE Linux Enterprise Product Support Lifecycle Policy, the regular 7 year life-cycle of SUSE Linux Enterprise Server 9 will end on August 31, 2011. AllSLES 9 configurations in the ESM will be frozen as of the publication of the August 2011 ESM. At this time, SLES 9 will no longer be publicly supported and will require anextended support contract from Novell in order for the SLES 9 configuration in the ESM to be supported by EMC. Extended and Self-Support from Novell is planned to end August31, 2014.

56. Supported kernels: 2.6.5-7.308, 2.6.5-7.311, 2.6.5-7.312, 2.6.5-7.314, 2.6.5-7.315, 2.6.5-7.316, 2.6.5-7.317, 2.6.5-7.318, 2.6.5-7.319, 2.6.5-7.321, 2.6.5-7.322, 2.6.5-7.323,2.6.5-7.324, 2.6.5-7.325. The 32bit kernel 2.6.5-7.311 is not supported with PowerPath 5.1 SP1. Confirm kernel support with server vendor.

57. Supported kernels: 2.6.5-7.244, 2.6.5-7.252, 2.6.5-7.257, 2.6.5-7.267, 2.6.5-7.276, 2.6.5-7.282, 2.6.5-7.283, 2.6.5-7.286, 2.6.5-7.287.3.Confirm kernel support with server vendor.

58. Novell OES is supported on kernels 2.6.5-7.244, 2.6.5-7.252, 2.6.5-7.257, 2.6.5-7.267, 2.6.5-7.276, 2.6.5-7.282, 2.6.5-7.283, 2.6.5-7.286, 2.6.5-7.287.3, and 2.6.5-7.308 withEMC PowerPath only.

59. Novell OES 2 is supported with Linux native MPIO or via RPQ for EMC PowerPath.60. Novell OES 2 SP1 is supported with this update.61. Supported kernels: 2.6.16.21-0.8, 2.6.16.21-0.15, 2.6.16.21-0.25, 2.6.16.27-0.6, 2.6.16.27-0.9.

Confirm kernel support with server vendor.PowerPath 5.0 support begins with kernel 2.6.16.27-0.6.

62. Supported kernels: 2.6.16.46-0.12, 2.6.16.46-0.14, 2.6.16.53-0.8, 2.6.16.53-0.16, 2.6.16.54-0.2.3, 2.6.16.54-0.2.5, 2.6.16.54-0.2.8. Confirm kernel support with server vendor.63. PowerPath is not available or supported.64. EMC supports the following filesystems: ext2, ext3, reiserfs unless otherwise noted in the ESM. If there is a customer requirement for a different filesystem, please submit an

RPQ.65. Supported kernels: 2.6.16.60-0.21, 2.6.16.60-0.23, 2.6.16.60-0.27, 2.6.16.60-0.30, 2.6.16.60-0.31, 2.6.16.60-0.33, 2.6.16.60-0.34, 2.6.16.60-0.35, 2.6.16.60-0.37,

2.6.16.60-0.39.3, 2.6.16.60-0.42.4, 2.6.16.60-0.42.5, 2.6.16.60-0.42.7, 2.6.16.60-0.42.8, 2.6.16.60-0.42.9, 2.6.16.60-0.42.10, 2.6.16.60-0.42.11. Confirm kernel support withserver vendor.

66. Native multipathing is not supported on boot-from-SAN configurations.67. Supported kernels: 2.6.9-22.EL, 2.6.9-22.0.2.EL.

Confirm kernel support with server vendor.68. Suported kernels: 2.6.9-34.EL, 2.6.9-34.0.1.EL, 2.6.9-34.0.2.EL.

Confirm kernel support with server vendor.69. Supported kernels: 2.6.9-42.EL, 2.6.9-42.0.2.EL, 2.6.9-42.0.3.EL.

Confirm kernel support with server vendor.70. Supported kernels: 2.6.9-55.EL, 2.6.9-55.0.2.EL., 2.6.9-55.0.6.EL, 2.6.9-55.0.9.EL, 2.6.9-55.0.12.EL, 2.6.9-55.0.14.EL. Confirm kernel support with server vendor.71. Supported kernels: 2.6.9-67.EL, 2.6.9-67.0.1.EL, 2.6.9-67.0.4.EL, 2.6.9-67.0.7.EL, 2.6.9-67.0.15.EL, 2.6.9-67.0.20.EL, 2.6.9-67.0.22.EL. Confirm kernel support with server

vendor.72. Supported kernels: 2.6.9-78.EL, 2.6.9-78.0.1.EL, 2.6.9-78.0.5.EL, 2.6.9-78.0.8.EL, 2.6.9-78.0.13.EL, 2.6.9-78.0.17.EL, 2.6.9-78.0.22.EL, 2.6.9-78.0.24, 2.6.9-78.0.31.EL,

2.6.9-78.0.32.EL, 2.6.9-78.0.33.EL. Confirm kernel support with server vendor.73. Supported kernels: 2.6.18-8.EL5, 2.6.18-8.1.1.EL5, 2.6.18-8.1.3.EL5, 2.6.18-8.1.4.EL5, 2.6.18-8.1.6.EL5, 2.6.18-8.1.8.EL5, 2.6.18-8.1.10.EL5, 2.6.18-8.1.14.EL5, and

2.6.18-8.1.15.el5. Confirm kernel support with server vendor.74. Supported kernels: 2.6.18-53.el5, 2.6.18-53.1.4.el5, 2.6.18-53.1.6.el5, 2.6.18-53.1.13.el5, 2.6.18-53.1.14.el5, 2.6.18-53.1.19.el5, 2.6.18-53.1.21.el5. Confirm kernel support with

server vendor.75. Supported kernels: 2.6.18-92.el5, 2.6.18-92.1.1.el5, 2.6.18-92.1.6.el5, 2.6.18-92.1.10.el5, 2.6.18-92.1.13.el5, 2.6.18-92.1.17.el5, 2.6.18-92.1.18.el5,2.6.18-92.1.22.el5,

2.6.18-92.1.24.el5, 2.6.18-92.1.26.el5. Confirm kernel support with server vendor.76. Supported kernels: 2.6.9-42.EL, 2.6.9-42.0.2.EL, 2.6.9-42.0.3.EL, 2.6.9-42.0.8.EL, 2.6.9-42.0.10.EL. Confirm kernel support with server vendor.77. Supported kernels: 2.6.9-34.EL, 2.6.9-34.0.1.EL, 2.6.9-34.0.2.EL. Confirm kernel support with server vendor.78. Supported kernels: 2.6.18-8.10AX. Confirm kernel support with server vendor.79. Supported kernel 2.6.18-53.11AXS3, 2.6.18-53.19AXS3. Confirm kernel support with server vendor.80. Supported kernels: 2.6.9-42.7AX.

Confirm kernel support with server vendor.81. Asianux 2.0 SP2 include Redflag DC Server 5.0 SP2, Miracle Linux v4.0 SP2, HanCom 2006 Server Asianux Server 2.0 SP2.82. Kernels supported: 2.6.9-34.21AX.

Confirm kernel support with server vendor.83. Asianux 2.0 SP1 include Redflag DC Server 5.0 SP1, Miracle Linux v4.0 SP1, HanCom 2006 Server Asianux Server 2.0 SP1.84. Support kernel: 2.6.9-42.7AX. Contact server vendor for support.85. Supported kernels: 2.6.9-22.EL, 2.6.9-22.0.1.EL, 2.6.9-22.0.2.EL. Confirm kernel support with server vendor.86. Asianux 2.0 GA include Redflag DC Server 5.0 GA, Miracle Linux v4.0 GA, HanCom 2006 Server Asianux Server 2.0.87. Supported kernels: 2.6.9-11.19AX.

Confirm kernel support with server vendor.88. Supported kernels: 2.6.9-11.25AX.

Confirm kernel support with server vendor.89. Enabling os07 does not have any effect unless SP2 is also enabled.90. SC3 may be optionally enabled only if SPC is also enabled.91. 5.1B-6=5.1B PK8. (T64V51BB29AS0008-20100821.tar)92. 5.1B-2=5.1B PK4.93. 5.1B-5=5.1B PK7. (T64V51BB28AS0007-20090312.tar)94. 5.1B-4=5.1B PK6. (T64V51BB27AS0006-20061208.tar)95. SC3 flag can only be optionally set if SPC2 is also set96. Migration from SPC2 clear to SPC2 set for existing utilized volumes by VxVM may require special procedure.97. For a list of supported guest operating systems, refer to http://www.vmware.com/resources/compatibility/search.php?deviceCategory=software. For additional information refer to

the Guest Operating System Installation Guide at http://www.vmware.com/pdf/GuestOS_guide.pdf98. For information on VMware VAAI (vStorage APIs for Array Integration) or VASA (vStorage APIs for Storage Awareness) support with EMC storage please refer to the vSphere 5

Simple Support Matrix on elabnavigator.emc.com.99. EMC supports VMware's recommendations for number of nodes in native ESX cluster configurations.100. All released updates to ESX version are supported unless otherwise specified by a footnote. Please contact server vendor for the update level required for a specific server.101. Supported kernels: 2.6.39-200.24.1.el6uek, 2.6.39-200.29.3.el6uek, 2.6.39-200.31.1.el6uek, 2.6.39-200.33.1.el6uek, 2.6.39-200.34.1.el6uek. Confirm kernel support with

server vendor.102. Supported kernels: 2.6.32-279.el6, 2.6.32-279.1.1.el6, 2.6.32-279.2.1.el6, 2.6.32-279.5.1.el6, 2.6.32-279.9.1.el6, 2.6.32-279.11.1.el6, 2.6.32-279.14.1.el6. Confirm kernel support

with server vendor.103. Enable the OS2007 flag will cause Solaris host to log the Unit Attention event when LUNs on the FA port change. This behavior is expected and not harm to any applications.104. EMC recommends as a best practice that customers upgrade to the most recent Solaris 11 SPARC SRU released on the Oracle website:http://support.oracle.com105. EMC recommends as a best practice that customers upgrade to the most recent Solaris 11 x86 SRU released on the Oracle website:http://support.oracle.com106. Supports 2-node Microsoft Cluster Services (MSCS) with Windows 2003 and Windows 2008 virtual machines in CIB (Cluster in Box) and CAB (Cluster across Boxes)

configurations for Fibre Channel configurations. VMware NMP (Native Multipathing) and PowerPath/VE are supported with MSCS.107. FC-AL topology supported with direct attach only.108. Shared HBA environments between disk and tape/tape libraries are not supported for Novell.109. NetWare NSS has 256 LUN per port limitation. If NSS will not be used, 128 LUNs is supported.110. Maximum number of NWFS volumes that can be mounted is 64.111. PowerPath is not supported in conjunction with host-based mirroring.112. Requires IBM PTF MF42315.113. For IBM Performance Tools for IBM i, PTFs SI38651 & SI38842 are required.114. Requires IBM PTFs MF47831 and MF47866.115. EMC recommends as a best practice that customers upgrade to the most recent Solaris 9 SPARC patch bundle released on the Oracle website:http://support.oracle.com116. EMC supports ZFS in Solaris 10_x86 11/06 (update 3) or later. The Snapshot and Clone features of ZFS are supported only through Sun Microsystems.117. EMC recommends as a best practice that customers upgrade to the most recent Solaris 10 x86 patch bundle released on the Oracle website:http://support.oracle.com118. EMC recommends as a best practice that customers upgrade to the most recent Solaris 10 SPARC patch bundle released on the Oracle website:http://support.oracle.com119. Recommended to enable os07 for HP-UX 11iv3 (HP-UX 11.31) initiators, refer to EMC HP-UX Host Connectivity Guide.120. For information on VMware VAAI (VMware vStorage APIs for Array Integration) support with EMC storage, and details on array firmware versions that support VAAI please refer

to the Storage/SAN section of the VMware Hardware Compatibility Guide athttp://www.vmware.com/resources/compatibility/search.php.121.



Oracle Database 11g R1 is supported on VMware vSphere 4.0 Virtual Machines with Symmetrix, CLARiiON, and Celerra storage platforms. For details, refer tohttp://www.vmware.com/solutions/partners/alliances/oracle.html.

122. Supports 2-node Microsoft Cluster Services (MSCS) with Windows 2003 and Windows 2008 virtual machines in CIB (Cluster in Box) and CAB (Cluster across Boxes)configurations. VMware NMP (Native Multipathing) and PowerPath/VE are supported with MSCS.The following SCSI Controllers are supported with VMWare and MSCS:Windows 2000 Server LSI Logic Parallel, Windows Server 2003 LSI Logic Parallel, Windows Server 2008 LSI Logic Parallel.You must download the LSI Logic Parallel driver for Windows 2000 Server on the LSI Web site.

123. Oracle RAC 11g R2 is supported on Red Hat RHEL 5 and Microsoft Windows Virtual Machines running on VMware vSphere 4.1 with EMC storage platforms. For details, refer tohttp://vmware.com/support/policies/oracle-support.html

124. Supported with vMotion.125. Supported kernels: 2.6.18-345.el5. Confirm kernel support with server vendor.126. x64 support only.127. Microsoft Hyper-V for Windows Server 2012 supported.128. Windows Server Core installation option is supported by EMC. Contact your server vendor to determine their support statement for Server Core.129. Datacenter and Standard editions supported.130. Veritas File System is not supported131. Supported kernel: 2.6.32-279.2.1.el6. Confirm kernel support with server vendor.132. D Bit with Cluster133. Supported kernels: 2.6.32.43-0.4.1.xs1.6.10.734.170748xen. Confirm kernel support with server vendor.134. Citrix integrated Storage Link is currently supported using RAID5 storage repositories only. For additional limitations and guidelines please refer to the Citrix XenServer 6.1

release notes. Please note that integrated Storage Link snapshots are based on array based SANcopy; therefore, SANcopy licenses are required on the storage for snapshotsupport.

Return To Top

February 2013 ESM



Table of ContentsCopyright EMC Corporation 2013 EMC's Policies and Requirements for EMC Support Matrix Director Bit/Flag Information

Documents

Flags Setting for VMAX February 2013