Upload
others
View
13
Download
0
Embed Size (px)
Citation preview
Currenza Bill Recycler Operation and Service Manual
Rev. 07-2011 Part 1. Operation Manual Page 1-1
Fixed Width Bill Recycler
Operation and Service Manual
Part 1. Operation Manual
www.igrotechnics.ru
Currenza Bill Recycler Operation and Service Manual
Rev. 07-2011 Part 1. Operation Manual Page 1-2
www.igrotechnics.ru
Currenza Bill Recycler Operation and Service Manual
Rev. 07-2011 Part 1. Operation Manual Page 1-3
CONTENTS INTRODUCTION ............................................................................................................................................... 4 PRODUCT OVERVIEW..................................................................................................................................... 5 GENERAL SPECIFICATIONS........................................................................................................................... 6
Approvals....................................................................................................................................................... 8 DIMENSIONS .................................................................................................................................................... 9 GENERAL WIRING DIAGRAM ....................................................................................................................... 11 CHOOSING MB FEATURES AND PART NUMBERS .................................................................................... 12
Bill Validator................................................................................................................................................. 12 Bezel style ............................................................................................................................................... 12 Indoor or outdoor application .................................................................................................................. 12
Bill Box........................................................................................................... Error! Bookmark not defined. BlueChipTM sim card and software update options................................................................................... 13
INSTALLATION ............................................................................................................................................... 13 Bill validator installation ............................................................................................................................... 13
INTERFACE CONNECTION ........................................................................................................................... 14 INPUT/OUTPUT CIRCUITS ............................................................................................................................ 16 SWITCH SETTINGS........................................................................................................................................ 17
Bill validator ................................................................................................................................................. 17 Recycling cartridge ...................................................................................................................................... 17
FEED/UNLOAD BUTTONS ............................................................................................................................. 18 MAINTENANCE AND SERVICE ..................................................................................................................... 18
Bill Box Removal and Installation ................................................................................................................ 18 Recycling Cartridge Removal and Installation............................................................................................ 20 Scheduled Maintenance .............................................................................................................................. 22 Installation of the BlueChipTM sim card...................................................................................................... 24
SOFTWARE UPDATES..................................................................................... Error! Bookmark not defined. Download procedure for a Single-download sim card:................................................................................ 24 Download procedure for a Multi-download sim card: .................................... Error! Bookmark not defined. Download procedure via interface connector: ............................................... Error! Bookmark not defined.
SOFTWARE UPDATE DIAGNOSTICS........................................................................................................... 25 TROUBLESHOOTING..................................................................................................................................... 26
Operation Mode Diagnostics ....................................................................................................................... 26 TECHNICAL SUPPORT .................................................................................................................................. 27
www.igrotechnics.ru
Currenza Bill Recycler Operation and Service Manual
Rev. 07-2011 Part 1. Operation Manual Page 1-4
INTRODUCTION
The scope of this document is to provide complete technical information about the MB Bill Recycler. - Development of new equipment with the MB bill recycler. - Selection of the right configuration and part number. - Installation. - Maintenance and service. - Repair. The Manual consists of two parts: Operation Manual and Service/Repair Manual.
www.igrotechnics.ru
Currenza Bill Recycler Operation and Service Manual
Rev. 07-2011 Part 1. Operation Manual Page 1-5
PRODUCT OVERVIEW Bill Box
Bill Validator
Recycling Cartridge
The CashCode MB bill recycler is typically installed
on the front door (or the front panel) of a machine. Access to the recycling cartridge and the bill box is from the rear side of the validator.
A complete MB unit consists of three parts – the bill validator itse lf, the removable recycling cartridge and the removable bill box. The MB has a fixed width bill path for currencies 66 mm wide. The MB has very high acceptance rate, due to a set of advanced sensors and smart software that can precisely identify authentic bills from all known counterfeits. Six multi-color optical sensors scan both sides of the bill. Two patented inductive sensors read the magnetic properties of the bill. All sensors have auto-calibration, no adjustments Required. The validator always provides the same high acceptance level during its lifetime. The MB accepts bills in four ways and is equipped with a cross channel sensor to prevent stringing. The MB bill recycler is very reliable and efficient, including the following features: Beltless design minimizes maintenance of bill transport mechanism. The “Clamsh ell ” design for the bill recognition section provides a fast and easy access to the bill path. Special rollers prevent bill jams when poor quality bills are inserted. Software updates are fast and easy by means of BlueChipTM sim card. The update only take seconds. The procedure does not require technical personnel, tools, or disconnecting the unit. The socket for the BlueChipTM sim card is accessible from the back. No disassembly is required.
www.igrotechnics.ru
Currenza Bill Recycler Operation and Service Manual
Rev. 07-2011 Part 1. Operation Manual Page 1-6
The MB can be mounted Up-sta cker (common for vending equipment) or Down-stacker (used in amusement machines). The MB uses standard MDB pr otocol . Is available with the standard coin-proof bezel with blue running lights or Vandal-proof metal bezel with single bicolor LED e bicolor LED
The bill boxes are availa ble in 300 and 400 bill capacity sizes. The bill boxes are available in 300 and 400 bill capacity sizes. The Recycling Cartridge has 30 bills capacity, which is also programmable in case the full capacity is The Recycling Cartridge has 30 bills capacity, which is also programmable in case the full capacity is not necessary. In addition, information concerning the type of denomination being recycled and cartridge contents is stored inside the module’s internal memory. not necessary. In addition, information concerning the type of denomination being recycled and cartridge contents is stored inside the module’s internal memory. A two digit display on the back of the module shows how many bills are inside the recycler cartridge. A two digit display on the back of the module shows how many bills are inside the recycler cartridge. Bill boxes available. Bill boxes available.
Slot for sim card
Interface connector
Coin-proof bezel
Place for bezel label
Running lights
DIP switches
300 400
www.igrotechnics.ru
Currenza Bill Recycler Operation and Service Manual
Rev. 07-2011 Part 1. Operation Manual Page 1-7
GENERAL SPECIFICATIONS Validation Sensors : 3-color optical sensors ……………………………………………………………………………………...……6 Inductive sensors…………………………………………………………………………..……………………...2 Anti-stringing sensor Interface connector: 10-pin connector used with custom ribbon cable harness (compatible with SMV) Supported Protocols and Interfaces:
24V Platform…………………………………………………………………………..…………….….MDB Custom interface channel for NRI changer connection, reading of statistical data and programming
Supported bill boxes …………………………………………………..……..Drop-resistant plastic bill box Maximum stacking capacity (new bills)………………………………………………….……………300, 400 Bezels Coin-proof plastic bezel with running lights Vandal and coin-proof single-LED metal bezel Diagnostics indication …………………………………………….………………….Blinks of the bezel lights Recycling cartridge features: Capacity……………………..…………………………………………………..….30 bills max.(programmable) Status/contents indication/software level(on power up only)………………….………… 2-digit LED display Manual controls…………………………………………………………2 mode buttons (feed and unload),
recycling cartridge assignment setup switch (2 positions)
Unload level assignment………………………………………………using custom CashCode/NRI interface Memory programming CashCode BlueChipTM sim card In the service mode (via interface connector) Using handheld device via custom NRI interface channel Supported BlueChipTM sim card types …………………………….…………..Manufacturer, Multi-update Mode selection……… …………………………………………………………………..…8-position DIP switch Acceptance: Bills…………………………………………………………….lengthwise 4 ways or 1 way selectable by switch Custom coupons……………………………………………..lengthwise 4 ways or 1 way selectable by switch Bar-coded coupons……………………………………………….…………………………………..not supported Validating rate…………………………………………………………………..…96% or higher on first insertion Bill Width (mm) ………….…………………………………..…………………..……………..………………….66 Maximum length of a bill (mm) ……….………………………………………………………..………….……160 Minimum length of bill (mm) …………………………………………………………………..…….…….……120 Bill escrow………………………………………….…………………………….……………...…………....one bill
www.igrotechnics.ru
Currenza Bill Recycler Operation and Service Manual
Rev. 07-2011 Part 1. Operation Manual Page 1-8
Bill processing cycle: Bill centring and validation (before escrow position) ………………………………….less than 1.5 second Bill transport from escrow to cassette and stacking ……………….……………………less than 1 second Bill rejection (from escrow) …………………………………………………………..….less than 1.2 second Target change cycle …..………………………………1
st bill – 2 seconds, next – plus 0.7 second per bill
Power supply voltage . …………………………………………………………………............22..40 V DC Current consumption:
34 V DC, operating mode (max) ….………………………………………………………..………3 A 34 V DC, standby ….………………………………………………………………………………0.6 A
Power consumption: Idle mode ….………………………………………………………………………………………………..TBD Validation mode ……………………………………………………………………………………………TBD Environmental: Operating temperature …..…………………………………………………………………. –18 C to +60 C Storage temperature ……..…………………………………………………………………….-30C to +60C Humidity (non-condensing) …….………………………………………………………………..30%-90%RH Validation M.T.B.F ………………………………………………………………………………750000 cycles Lifetime expectation ..………………………….more than 1 000 000 processed banknotes or 10 years Approvals FCC class B UL 756 CE ROHS compliant Installation …..………………………………………………..On a machine vertical front wall from inside Two ways: drop cassette Up or Down Cabinet front panel’s thickness………………………………….1.5 to 12.7 mm (depends on a bezel type) Access to drop and recycling cartridge...……………………………………from back side of the validator Dimensions (WxHxD With 300 bill cassette…………………………………………………………………………….104x450x130 With 400 bill cassette…………………………………………………………………………….104x450x146 Weight (kg) ………………………………………………..3.2kg (with 300 bill cassette and plastic bezel)
www.igrotechnics.ru
Currenza Bill Recycler Operation and Service Manual
Rev. 07-2011 Part 1. Operation Manual Page 1-9
DIMENSIONS
28.7 [1.13"]
45
4.1
[17
.88
"]
12
0.8
[4.7
6"]
14
3.8
[5.6
6"]
21 [
0.8
3"]
22.3
[0.8
8"]
90.6 [3.57"]
16.5 [0.65"]10.6 [0.42"]
130 [5.12"]
162.1 [6.38"]
188.1 [7.40"]
18
2 [
7.1
7"]
17
4.7
50.8 [2.00"]
8 [0
.31"]
116
[4
.57
"]
68 [2.68"]
118.4 [4.66"]
37
.5 [
1.4
8"]
25°
83.6 [3.29"]
5 [0.20"]
3.2 [0.13"]
O3.1 [O0.12"]
5.6
[0
.22"]
Inte
rface C
on
necto
rs(rig
ht s
ide)
129.9 [5.11"]
300 BANKNOTES
400 BANKNOTES
600 BANKNOTES
6 [0.24"]
105
.1 [
4.1
4"]
13
.4 [0
.53
"]
Cassette
8 slots for Threaded Studs
Metal Down Bezel Metal Up Bezel
www.igrotechnics.ru
Currenza Bill Recycler Operation and Service Manual
Rev. 07-2011 Part 1. Operation Manual Page 1-10
Protective earth ground terminal must be connected to the machine electric earth. This connection must be made by cable OPT-MKSM-GND or another cooper wire cable with 14 or 12 AWG gauge. Use the shortest, practical wire length. Refer to local wiring codes and regulations for grounding requirements. Chassis grounding .
Metal be zel grounding
www.igrotechnics.ru
C
urre
nza B
ill Recycle
r
O
pe
ratio
n a
nd
Se
rvic
e M
an
ua
l
Rev. 0
7-2
011
Part 1
. Opera
tion M
anual
Page 1
-11
GE
NE
RA
L WIR
ING
DIA
GR
AM
M1
X2
123
X2
1234567
X2
123
X1
12345678
X3
123
X1
123456789
1011121314
X1
12345678
X2
12345678
M1X1
123
X2
1234567
X4
123456
X10
1234567
X1
123
X1
1234567891011121314
X1
12345678910
X2
12345678910
X1
123
X9
123
X1
123456789
10
M1
X3
12345678
X6
123456789
10
X8
123456
X2
1 2 3 4 5 6 7 8 9
X1
123456
X1
123456789101112
M1
X1
123456789101112
X7
123456789
1011121314
X4
123456789
101112
X5
123456789
101112
X1
1 2 3 4 5 6 7 8 9
123
X1
X1
1234567
X1
12345678
12345678
X2
X2
X2
X2
123456789101112
123456789101112
1234567891011121314
X1
123456789
101112
123456789
101112
X1
X1
12345678
CPU BOARDMB05
MB05
STACKER MOTOR
BOARD
0403031CABLE
TMOTOROBTURATOR
TRANSPORTMOTOR
1
2
3
4
5
6
X1MDB
MRX
DC POWER RET
GROUND
7
8
34V DC
COMMON
MTX
9
10
RECYCLINGCASSETTE
CMRX
+5V
CASSETTE
CASSETTE
GATE MOTOR
TAPE MOTORCONTROLLERBOARD
BOARDTAPE SENSORS
ENTRANCE BOARD
CMTX
MB05 OPTICAL SENSOR
MB05 MAGNETIC SENSORBOARD
FR1
0500090-02
MB05 MEMORY CARD BOARD
"MEMORY CARD"
INDICATOR BOARD
0402051
0405085
0404024
0405088
CABLE0500090-01
05001905
CABLE
CABLE0500153
05001905
CABLE
0500160
CABLE
0500101
CABLE0500109
CABLE
05001905
CABLE
CABLE0500169
0401035
0401033
0401040
0500054
0500054-01
0405012
CABLE0600018
www.igrotechnics.ru
Currenza Bill Recycler Operation and Service Manual
Rev. 07-2011 Part 1. Operation Manual Page 1-12
CHOOSING MB FEATURES AND PART NUMBERS
Bill Recycler
The information below helps to choose the appropriate MB: - Bezel style - Indoor or outdoor application (coated boards are used for outdoor application)
Bezel style Three different styles of bezel are currently available: The standard plastic bezel can be used for the STACKER UP
configurations. The bezel has a status indicator with running lights that glow BLUE when ready and RED when disabled. The running lights are also used for diagnostics (described in the troubleshooting section). The bezel has protection from inadvertent insertion of coins. The metal bez el is designed to provide more resistance to vandalism or rough environments and also includes the coin-resistant feature. A red/green light indicates status of the validator. The bezel is available in two configurations: UP STACKER or DOWN STACKER.
Metal Bezel (DOWN-STACKER) Metal Bezel (UP-STACKER)
Indoor or outdoor application The MB bill recycler can be ordered with boards coated for outdoor applications.
Bill Box The MB bill box is available in two different capacities: 300 or 400 bills.
www.igrotechnics.ru
Currenza Bill Recycler Operation and Service Manual
Rev. 07-2011 Part 1. Operation Manual Page 1-13
BlueChipTM sim card and software update options Software updates are released to accommodate new currency releases, new features and enhancements or to improve security. Software updates are offered in two options: 1) Multi-download Memory stick. The multi-download Memory stick allows for unlimited downloads.
2) Download via interface connector.
The download is done thru the NRI coinchanger by means of a Palmtop. Downloads may be done by connecting the recycler to a personal computer through a special adapter. Instructions on the software update procedure can be found in the chapter: “SOFTWARE UPDATES”.
There are two separate part numbers for the MB Bill Recycler - software part number and hardware part number.
Example hardware part number:
MB
MB series
– 2117
Hardware part number
Example software part number:
– US88-1.00MB
Software part number
MB series
INSTALLATION
Bill recycler installation The MB bill recycler is usually installed on a door or panel. The panel or door must have a rectangular cut-out, with three threaded studs (vending machines have four studs for the validator, the top right isn’t used with MB) and two additional studs at the top (per picture below, normally not necessary).
www.igrotechnics.ru
Currenza Bill Recycler Operation and Service Manual
Rev. 07-2011 Part 1. Operation Manual Page 1-14
33
1.8
[1
3.0
6"]
4.4
[0
.17
"]
86 [3.39"]
107
.1 [4
.22
"]
50.8 [2.00"]
91 [3.58"]
11
6 [
4.5
7"]
3 threaded studs#8-32hight 0.5''
2 additional pointsfor screws #8 or M4
INTERFACE CONNECTION
The validator is powered by 24 Volt DC and is suited for MDB Interface (vending applications).
www.igrotechnics.ru
Currenza Bill Recycler Operation and Service Manual
Rev. 07-2011 Part 1. Operation Manual Page 1-15
For detailed interface descriptions, please refer to Protocol Description Manuals available from the CashCode website: www.cashcode.com
Pin Assignment (cable connector):
Molex, Part #: 90142; 90119, 9 pcs
The supplied harness OPT-HS-MDB connects the validator to a regular Multi Drop Bus. Signal descriptions:
TERMINAL SIGNAL FUNCTION 1 DC/AC POWER RET POWER 2 24V DC POWER 3
4 MRX MASTER RECEIVE INPUT
5 MTX MASTER TRANSMIT OUTPUT 6 COMMON COMMUNICATION’S COMMON
7 CMTX MASTER TRANSMIT OUTPUT
(Changer)
8 CMRX MASTER RECEIVE INPUT
(Changer) 9 GROUND GROUND
10 +5V POWER
www.igrotechnics.ru
C
urre
nza B
ill Recycle
r
O
pe
ratio
n a
nd
Se
rvic
e M
an
ua
l
Rev. 0
7-2
011
Part 1
. Opera
tion M
anual
Page 1
-16
INP
UT
/OU
TP
UT
CIR
CU
ITS
C
PU
boa
rd (0
40
103
5)
GND
+3V3
GND
GND
+5V
GND
+3V3
+3V3
+5V
GND
GND
+5V
+3V3
GND
COMMON
GROUND
PWR+
PWR-
MTX
MRX
CMRXCMTX
FROMMICROCONTROLLER
TOMICROCONTROLLER
TXD0
TXD1
RXD0
RXD1
RST
R35 51K
R33
2.2K
VD5
BAS16LT1G
VE2IL208AT
56 1
27
R34 200
R37
2K
DD8E
MC74HC14ADG
1011
VD12 MBRS1100T3
R30 51K
VD4
BAS16LT1G
VE1
IL208AT
561
2 7
VT13
MMBT4401LT1
DD8F
MC74HC14ADG
1213
R29
56
X1
MOLEX 90130-3210
1 23 45 67 89 10
DD8B
MC74HC14ADG
4 3
DD8C
MC74HC14ADG
6 5
R28
10K
DD8D
MC74HC14ADG
8 9
R40
10K
VT17
MMUN2233LT1G
VT18
MMBT4403LT1GC35
560
R36 1K
R41
5.1K
VT19
MMBT4403LT1G
R42 1K
R43
4.7
VT14
MMUN2233LT1GDD8A
MC74HC14ADG
2 1
R31 1K VD3
BAS16LT1G
C15
0.1
R3
330K
7
VD6
BAV99LT1G
PWR-
PWR+
www.igrotechnics.ru
Currenza Bill Recycler Operation and Service Manual
Rev. 07-2011 Part 1. Operation Manual Page 1-17
SWITCH SETTINGS
Bill recy cler The DIP switches are on the CPU board and are accessible without removal of the bill box.
The MB operates in two basic modes: Validation and Service.
Validation Mode: The normal operation mode.
Service Mode: Used for testing purposes.
Selection between these two modes as well as denominations enable/disable, high acceptance/high security and coupon acceptance, is configured via these DIP switches DIP switches function:
Switch # Function 1 Off= $1 Enabled, On=$1 Disabled 2 Off= $2 Enabled, On=$2 Disabled 3 Off= $5 Enabled, On=$5 Disabled 4 Off= $10 Enabled, On=$10 Disabled 5 Off= $20Enabled, On=$20 Disabled 6 Off= Coupon Enabled, On= Coupon Disabled 7 Off=High Acceptance, On= High Security 8 Off= Normal operation, On= Service mode
Recycling cartridge The two buttons and two DIP switches to operate and configure the recycling cartridge are accessible from the back without the need for disassembly. The DIP switches set the denomination to be recycled and place the unit in “float” setting mode. Switch 1 Off= Recycle $1, On= Recycler $5 Switch 2 Off= Normal operation, On= Float setting, when in float setting mode, the feed and unload buttons act as up/down for float adjustment, when desired float is set, return switch 2 to Off.
www.igrotechnics.ru
Currenza Bill Recycler Operation and Service Manual
Rev. 07-2011 Part 1. Operation Manual Page 1-18
Description of the switch functions also comes in the Software User’s Guide (supplied with the unit) or at www.cashcode.com.
LCD display
DIP switches
Unload button
Feed button
FEED/UNLOAD BUTTONS The feed/unload buttons are next to the DIP switches on the back of the recycling cartridge. The feed button is used to load the cartridge with bills for the denomination being recycled. The MB will go into feed mode by pressing and holding the feed button for 3 seconds. The running lights will go from running to a steady blinking, indicating the unit is in feed mode. At this point, the operator starts inserting bills for the denomination to be recycled until the desired float of bills is reached. The amount of bills will be shown on the two digit display on the back of the cartridge. To exit the loading mode, the feed button must be pressed again or if bills are not inserted within 30 seconds, the MB will time out and exit the feed mode automatically. The running lights will indicate normal operation again. By pressing the unload b utton one bill will be unloaded from the recycling cassette out to the bezel. If the feed and unload buttons are pressed and held simultaneously for a couple of seconds, the entire recycler cartridge contents will be loaded into the bill box.
MAINTENANCE AND SERVICE
Bill Box Removal and Installation To install the bill box into the bill recycler main chassis, insert the pins on the side of the bill box into the slots in the chassis and push down until the latch on the top of the bill box is engaged.
Installing the Bill Box:
www.igrotechnics.ru
Currenza Bill Recycler Operation and Service Manual
Rev. 07-2011 Part 1. Operation Manual Page 1-19
Remov ing the Bill Box: To remove the bill box, press on the latch to release, lift the box and remove it, outwards.
www.igrotechnics.ru
Currenza Bill Recycler Operation and Service Manual
Rev. 07-2011 Part 1. Operation Manual Page 1-20
PUSH
To collect bills from the bill box, press on the door’s latch as indicated below to open door, remove bills Close door by pressing door latch until is engaged. There is no need to remove the bill box from main chassis to collect the money.
Recycling Cartridge Removal And Installation
www.igrotechnics.ru
Currenza Bill Recycler Operation and Service Manual
Rev. 07-2011 Part 1. Operation Manual Page 1-21
Removing the Recycling Cartridge: - Push the latch on the side of the recycling cartridge as shown below; - Swing cartridge open as indicated and complete removal by dislodging pins on the other side from
their slots.
Installing th e Cartridge: - Insert the two metal pins into their slots and swing the cartridge close until the latch is engaged, as
shown below.
Opening the Cartridge:
Manual Unloading: Release plastic handle. Lift the gray cover and to turn it counter clockwise.
www.igrotechnics.ru
Currenza Bill Recycler Operation and Service Manual
Rev. 07-2011 Part 1. Operation Manual Page 1-22
Gate assembly
Raise a cover
Open the gate assembly (fork shaped part at bills entrance) and rotate the plastic handle counter- clockwise. The bills are manually dispensed one bill at a time. Should a jammed bill be present in the entrance slot, this bill can be easily removed without affecting the later operation of the cassette. Please note: manual bill unloading will reduce the number of the bills in the cartridge without changing the number of bills in the flash memory. It is strongly recommended to perform a complete unloading after the cartridge is replaced (please see the “Load/Unload buttons” section). This will allow the MB to readjust the flash memory when the cartridge is back in operation.
Caution. Do not try to pull out the tape in the cassette! This can damage the cassette!
MO
DU
LE
S
Scheduled Maintenance During normal operation, dust and dirt accumulate on the optical sensors and the rollers. This could result in reduced acceptance rate. The bill path is recommended to be cleaned, as explained below, every 6 months or after acceptance of 60,000 bills, whichever comes first. Remove the cartridge. Open the clamshell by pushing the button as shown below. Make certain that: there are no scratches on the guides and optical sensors there is no dirt or cracks on the surface of the transport rollers there is no dirt on the surface of the optical sensors the entire bill path is clean of paper debris or residue
www.igrotechnics.ru
Currenza Bill Recycler Operation and Service Manual
Rev. 07-2011 Part 1. Operation Manual Page 1-23
The dirt must be removed with soft moistened cloth. Isopropyl Alcohol is recommended for cleaning rollers with excessive dirt build up.
DO NOT USE ACETONE OR PETROLEUM BASED PRODUCTS AS THEY COULD CAUSE DAMAGE PLASTIC PARTS. Inspect the cartridge chamber to make certain that there are no bill fragments or paper residue left. They may be removed with compressed air.
Maintenance of the Recycling Cartridge Maintenance is recommended approximately twice a year and includes:
- visual inspection of tapes - visual inspection of optical sensors A mechanism within the cartridge keeps the tapes tight at all times, which provides appropriate support for stored bills. Should any tape start sagging, simply rotating the plastic handle on the cartridge in any direction. This makes the cartridge mechanism retighten the tape. For reliable operation, there must be no dust or dirt on the surface of the optical sensors. There are five sensors that must be cleaned with a soft cloth and isopropyl alcohol, once the front cover is open.
Bill position sensors
Push
Optical sensors
Light pipes
Inductive sensors
Bill position sensors
www.igrotechnics.ru
Currenza Bill Recycler Operation and Service Manual
Rev. 07-2011 Part 1. Operation Manual Page 1-24
Installation of the BlueChipTM sim card Accessing the BlueChipTM sim card slot is done from the back of the unit, no disassembly is required. Simply turn power off and insert the sim card in the way shown below.
Download procedure: Step 1. Turn Power OFF. Step 2. Insert sim card in its slot with contacts facing out. Step 3. Turn power ON, running lights will blink in a special pattern, wait until the downloading is completed (@ 4 seconds). Once the download is completed, the running lights will go back to normal pattern. Should the lights stay red, this means there is no communication between the MB and the host controller. Further download attempts would have no effect.
www.igrotechnics.ru
Currenza Bill Recycler Operation and Service Manual
Rev. 07-2011 Part 1. Operation Manual Page 1-25
SOFTWARE UPDATE DIAGNOSTICS Normally, the download process will be accompanied by a blinking red-blue status light for about 5
seconds. If the download has competed successfully, the status light will turn blue. Should the download is unsuccessful, the status light will emit short blue flashes followed by a longer red flash (“blue flashes on red”).
The following table lists description of errors indicated by the flashes. STATUS OF
DIAGNOSTIC LIGHT ERROR DESCRIPTION FAULT – HANDLING
1 Blue Flash on Red
External interface 1. Verify that software is appropriate for downloading via interface.
Repeat the procedure. 2 Blue flashes on red
Memory Stick CRC ERROR 1. Turn power off, remove and insert the Memory stick again, turn power on.
Replace the Memory Stick with a new one. 3 Blue flashes on red
Incorrect data in the Memory Stick
1. Verify that the software is suitable to the Bill Validator type.
Insert correct type of CashCode Memory stick. 4 Blue flashes on red
Memory stick is not inserted Insert the Memory Stick properly.
5 Blue flashes on red
Wrong type of the Memory Stick
Insert the proper type of CashCode Memory Stick.
6 Blue flashes on red
Failure during download 1. Turn power off, remove and insert the Memory Іtick again, turn power on.
Repeat the procedure. 7 Blue flashes on red
Operation ERROR of the Memory Stick Interface
1. Turn power off, remove and insert the Memory Stick again, turn power on.
Replace the Memory Іtick with a new one.
www.igrotechnics.ru
Currenza Bill Recycler Operation and Service Manual
Rev. 07-2011 Part 1. Operation Manual Page 1-26
TROUBLESHOOTING
The MB Bill Recycler has self-diagnostic capabilities to assist in a repair or maintenance. When the power is on, the Bill Recycler starts its self-diagnostic procedure. If the self-diagnostics test has passed, then the status light will turn blue. If an error is detected, then the status light on the front will blink red. The number of times the red light flashes is an indication of a specific problem or malfunction. A detailed list of these errors and corrective actions is provided below. Every time the running lights are red, you can insert a bill in the bezel, the unit will return a blinking pattern, just count the number of flashes and look on the table below for the problem associated.
Operation Mode Diagnostics
Number of status light
flashes
Error description Fault – handling
1 Bill Box removed Check if bill box is installed correctly 2 Wrong type of sensors Check accordance type of the sensor to
software 3 Bill Box full Empty Bill Box 4 Recycling cartridge is out of position
or there is a communication failure Check if recycling cartridge is installed correctly
5 Failure of the recycling cartridge gate Open the recycling cartridge and clean the optical sensors for the gate position
6 Failure of the optical sensors Open the guides and clean the optical sensors.
7 Failure of the inductive sensors Open the guides and clean the inductive sensors.
8 Failure of the transport motor Remove bill box and recycler cartridge and clean the bill path.
9 Failure of the recycling cartridge tape Open the recycling cartridge, clean the optical sensors for the tape position
10 Communication failure between main chassis and recycling cartridge
Check comb connector
11 The bill pathway is not empty Open the sensors compartment and check the condition of the bill path
12 Bill that should have been paid out was sent to the bill box
Remove bill box and recycler cartridge and clean bill path.
13 Bill jam in the recycling cartridge Remove the recycling cartridge and pull out jammed bill
www.igrotechnics.ru
Currenza Bill Recycler Operation and Service Manual
Rev. 07-2011 Part 1. Operation Manual Page 1-27
TECHNICAL SUPPORT 2720 Steeles Ave W. Concord, Ontario Canada L4K 4S3 Phone: 1-800-584-2633 (1-905-303-8874) Fax: 1-800-593-2633 (1-905-303-8875) E-mail: [email protected] Website: support.cashcode.com
www.igrotechnics.ru