Farval ®

Farval® Fittings, Accessories, Filters, Regulators, and Lubricators

Farval® Whatever your automaticlube requirement…

We have the solution!

Let 75+ Years Of Experience Design Your Next Lube System

Farval has been a manufacturer of automatic lubricating systems for over 75 years. We offer a complete line of pumps,valves, controllers, and accessories. Our pump line includes manual, air, electric, and hydraulic actuated models. Farval’svalve offering is the most comprehensive in the industry. We manufacture oil and grease Dualine valves, series progres-sive modular valves, and injectors. Farval also offers air/oil mixing modules, oil flow meters, and single point lubricators.

For additional information, please contact your nearest distributor or call Farval at 1-800-227-1063, ext. 25.

SINGLINE®INJECTORS

FLOW METERS

AIR/OIL SYSTEMSRECIRC-OIL PACKAGES

DUALINE®

PRO GREAZER®

Farval® Lubrication Systems, Inc.A SUBSIDIARY OF VESPER CORPORATION

2685 Airport Road • Kinston, NC 28504 • Tel. 800-227-1063 • Fax: 252-527-9232website: www.farval.com • e-mail: farval@icomnet.com

Delimon®

BULLETIN 1800G12/03 2M

ADVANTAGE PRINTING CO. • 252-523-8133

1

TUBING - STEEL, NYLON . . . . . . . . . . . . . . . . . . . . . .2

TUBE CLAMPS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2

STEEL CONNECTORS FOR STEEL TUBINGU-81 One Piece Nut & Sleeve . . . . . . . . . . . .3U-83 Straight Connector, Tube-to-Male Pipe 3U-84 Tube Union . . . . . . . . . . . . . . . . . . . . . .3U-87 90º Elbow, tube-to-Male Pipe . . . . . . .3

STEEL PIPE AND PIPE FITTINGPipe Specifications . . . . . . . . . . . . . . . . . . . . . . . .4U-104 Pipe Bushing, Standard Hex . . . . . . . . .4U-119 Pipe Plug, Hex Socket . . . . . . . . . . . . . .4U-1103 Street Elbow, 45º . . . . . . . . . . . . . . . . .4U-1104 Street Elbow, 90º . . . . . . . . . . . . . . . . .4U-1105 Street Elbow, 90º Reducing . . . . . . . . .4U-1106 Bushing, Inverted . . . . . . . . . . . . . . . . .427718 90º angle Adapter . . . . . . . . . . . . . . . .427717 Straight Adapter . . . . . . . . . . . . . . . . .4

BRASS CONNECTORS FOR STEEL AND NYLON TUBINGU-81 One Piece Nut & Sleeve . . . . . . . . . . . .5U-83 Connector, Straight Tube-to-Male Pipe 5U-84 Tube Union . . . . . . . . . . . . . . . . . . . . . .5U-87 Elbow, Tube-to-Male Pipe . . . . . . . . . .5U-151 Pipe Nipple . . . . . . . . . . . . . . . . . . . . . .5U-152 Street Elbow . . . . . . . . . . . . . . . . . . . . .5

LOW PRESSURE HOSE AND FITTINGSHose . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6U-404 Couplings . . . . . . . . . . . . . . . . . . . . . . .6U-407 Unions for U-702 Hose . . . . . . . . . . . . .6

HOSE ASSEMBLIESLow Pressure . . . . . . . . . . . . . . . . . . . . . . . . . . . .7Feed Line . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7High Pressure Hose . . . . . . . . . . . . . . . . . . . . . . .7

HOSE ADAPTERS, QUICK COUPLINGS & SWIVELSU-431 Adapter . . . . . . . . . . . . . . . . . . . . . . . .8U-997 Anti-Friction Swivel . . . . . . . . . . . . . . .8U-421/U-422 Coupling . . . . . . . . . . . . . . . . . . . . . . . .8

TABLE OF CONTENTS

ANCHOR TEES AND ELLSU-1008 Dual Line Tube Tee . . . . . . . . . . . . . . . .9U-1022C Anchor Tee . . . . . . . . . . . . . . . . . . . . . .9U-1927 Anchor Ell . . . . . . . . . . . . . . . . . . . . . . .9Straight Anchor Block . . . . . . . . . . . . . . . . . . . . .9

VALVESU-972D Shut-Off Needle Valve . . . . . . . . . . . .10U-129 Air Vent . . . . . . . . . . . . . . . . . . . . . . .10LB 9425 Adjustable Flow Restrictor . . . . . . . .1020311-3 3-Way Pneumatic . . . . . . . . . . . . . . .10U-10626 3-Way Pneumatic Oil &MCZ Oil & Grease Electric Shut-Off/Zone . . . . . .11

CHECK VALVES & MISCELLANEOUS ACCESSORIESU-109301 check Valve . . . . . . . . . . . . . . . . . . . .12U-1975 Check Valve for Discharge Ports . . . .12U-1972B Check Valves . . . . . . . . . . . . . . . . . . .12U-922C Spray Nozzle Assemblies . . . . . . . . . .12U-987 Spray Nozzle Adapter . . . . . . . . . . . .12U-1732 Indicator Cover for Dualine Valves . .12

RELIEF VALVES & STRAINERSU-962 Relief Fitting . . . . . . . . . . . . . . . . . . .13U-10903 Direct Spring Relief Valve . . . . . . . . .13LS Line Strainer . . . . . . . . . . . . . . . . . . . . . . . . .13

ELECTRONIC SWITCHES & HORNSU-620 Pressure Switch, S.P.D.T. . . . . . . . . . . .14U-623 Pressure Switch, S.P.D.T. -- Pneumatic . .14U-663-6 Pressure Switch (S.P.D.T.) . . . . . . . . . . . .14U-625 Explosion-Proof Switch . . . . . . . . . . . . .14U-10623 Switch, S.P.D.T. (NEMA 1) . . . . . . . . . . . .15U-914A Horn . . . . . . . . . . . . . . . . . . . . . . . . . . . .15

AIR CONTROL PANELS/GAUGES/MISCELLANEOUSLD7767C Air Control Panel - Remote . . . . . . .16U-902 Pressure Gauge . . . . . . . . . . . . . . . . .16Pump Hoist . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16Barrel Pump Low Level Switch . . . . . . . . . . . . . .16Air Filters/Regulators/Lubricators . . . . . . . . . . . .16Brushes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17

NOTE:ALL DIMENSIONS ARE SUBJECT TO CHANGEBASED ON VENDOR AVAILABILITY.

TUBE SIZE PART NO.NO.

TUBES

1

2

3

4

5

1

2

3

1

2

3

1

2

1

1

B CFIG.NO.

880 (60)

880 (60)

1,000 (68)

1,000 (68)

1,000 (68)

1,000 (68)

STEEL AND NYLON TUBING

2

STEEL TUBING

PART NO. TUBE O.D. TUBE WALLMAX. WORKING

PRESSUREpsig (bar)

HOW SOLD

27720

27388

27721

U424E6

1/8

1/8

1/4

3/8

.020

.020

.028

.049

4,700 (320)

4,700 (320)

3,300 (224)

3000 (204)

100’ coil

25’ coil

25’ coil

16-24’

*NYLON TUBING

COLOR PART NO. TUBE O.D. TUBE WALLMAX. WORKING

**PRESSUREpsig (bar)

HOW SOLD

BLACK

NATURAL

27722

27389

21672

U-428A

U-428B

U-428D

1/8

1/8

1/4

3/16

1/4

3/8

.022

.022

.050

.038

.050

.075

25’ coil

100’ coil

100’ coil

BYTHEINCH

27821-1

27821-2

27821-3

27821-5

3/16

3/16

3/16

303 S.S. TUBE CLAMPS

TUBE SIZE PART NO.NO.

TUBESDIMENSIONS

1/8*

OD

1

2

3

5

5/16

7/16

11/16

A B

SEE 27820-1

FIG.NO.

1

3

3

3

27820-1

27820-2

27820-3

27820-4

27820-5

U-301A1

U-301A2

U-301A3

U-301B1

U-301B2

U-301B3

U-301D1

U-301D2

U-301E1

U-301F1

1/8

3/16

3/16

3/16

3/16

1/4

1/4

1/4

5/16

5/16

5/16

7/16

7/16

9/16

11/16

DIMENSIONS

1/8*

OD

3/16

5/16

7/16

9/16

11/16

5/16

1/2

11/16

3/8

5/8

7/8

1/2

7/8

5/8

3/4

A

3/8

-

-

-

-

3/4

3/4

3/4

3/4

3/4

3/4

3/4

3/4

5/8

11/16

3/16

-

-

-

-

3/8

3/8

3/8

3/8

3/8

3/8

3/8

3/8

5/16

3/8

D

1

3

3

3

3

1

2

2

1

2

2

1

2

1

1

3/16

3/16

3/16

1/4

1/4

1/4

3/8

3/8

1/2

5/8

U-1301A4

U-1301A6

U-1301B4

U-1301B6

U-1301D3

U-1301D4

U-1301D6

U-1301E2

1/4

1/4

5/16

5/16

7/16

7/16

7/16

9/16

TUBE SIZE PART NO.NO.

TUBESDIMENSIONS

3/16

3/16

1/4

1/4

3/8

3/8

3/8

1/2

4

6

4

6

3

4

6

2

7/8

11⁄4

11⁄8

15⁄8

11⁄4

15⁄8

23⁄8

11⁄8

A BFIG.NO.

3

3

3

3

3

3

3

3

* Nylon tubing is not suitable where it mightcontact the following chemicals:Hydrachloric Acid, Hydrafluoric Acid, Hydrogen Peroxide, Hydrogen Sulfide,Nitric Acid, Oxalic Acid, Pepchloric Acid, Phenol,

Phosphoric Acid.Temperature Range is 50-180ºF

** STATED WORKING PRESSURE IS AT 75ºF.PRESSURE AT 180ºF IS APPROXIMATELY HALF.

Furnished with 1/4”-20 x 3/8” lg. self tapping screw U-240G2.* Screws not supplied for 1/8 tube clamps.

TUBE CLAMPS

NOTE:5/32 MOUNTING HOLE FOR 1/8 TUBE CLIPSALL OTHER STYLES/MODELS HAVE A 9/32 HOLE.

Furnished with 1/4”-20 x 3/8” lg. self tappingscrew U-240G2.

TUBE CLAMPS

TUBE CLAMPSFIGURE 1

FIGURE 2

FIGURE 3

STEEL CONNECTORS FOR STEEL TUBING

3

ASSEMBLY PROCEDURE FOR U-81 ONE PIECENUT & SLEEVE

U-81 ONE PIECE NUT AND SLEEVE TUBE TOMALE PIPE

U-83 STRAIGHT CONNECTOR, TUBE TOMALE PIPE

U-84 TUBE UNION

U-87 90º ELBOW, TUBE TO MALE PIPE

STEEL PIPE AND PIPE FITTINGS

4

2771890º ANGLE ADAPTER1/4�-28 MALE THD. TO 1/8� NPT FEMALE

27717STRAIGHT ADAPTER1/4�-28 MALE THD. TO 1/8� NPT FEMALE

This section describes all of Farval’s standard pipe fittingsexcept anchor tees which are described on page 9.

U-1105STEEL REDUCING STREET ELBOW (CAD.PLATED)

U-1106INVERTED STEEL BUSHING (ZINC PLATED)

U-119HEXAGON-SOCKET PIPE PLUG (ZINC PLATED)

U-104STD. HEX.PIPE BUSHINGS(NOT PLATED)

U-110345º STEEL STREET ELBOW (ZINC PLATED)

U-1104STEEL STREET ELBOW (ZINC PLATED)

.433

.505

.577

.577

.721

.865

.865

.865

.865

.577

.649

.938

F15⁄64

7⁄32

1⁄41⁄4

3⁄16

1⁄41/4

3/8

27728

27725

U-87-A1B

U-87-A2B

U-87-B1B

U-87-B2B

U-87-B3B

U-87-D1B

U-87-D2B

U-87-D3B

33⁄64

21⁄32

7⁄87⁄87⁄87⁄8

31⁄32

31⁄32

31⁄32

31⁄32

TUBE SIZE PART NO.Male Pipe

Thread(NPTF)

DIMENSIONS

1⁄81⁄8

3/16

3/16

1⁄41⁄41⁄43⁄83⁄83⁄8

1⁄4 -281⁄81⁄81/4

1⁄81⁄43⁄81⁄81⁄43⁄8

13⁄32

7⁄16

17⁄32

19⁄32

19⁄32

19⁄32

13⁄16

13⁄16

13⁄16

13⁄16

A B3⁄43⁄4

1

11⁄8

11⁄8

11⁄8

11⁄4

17⁄16

17⁄16

17⁄16

C

27727

27726

U-83-A1B

U-83-B1B

U-83-B2B

U-83-B3B

U-83-D1B

U-83-D2B

U-83-D3B

3⁄87⁄16

1⁄21⁄25⁄83⁄43⁄43⁄43⁄4

TUBE SIZE PART NO.Male Pipe

Thread(NPTF)

DIMENSIONS

1⁄81⁄83⁄16

1⁄41⁄41⁄43⁄83⁄83⁄8

1⁄4 -281⁄81⁄81⁄81⁄43⁄81/8

1⁄43⁄8

A B3⁄43⁄4

11⁄16

11⁄8

11⁄8

11⁄8

13⁄4

13⁄4

19⁄16

C

U-81 ONE PIECE NUT AND SLEEVETUBE TO MALE PIPE

This fitting permits connection of tubing with female pipethreads. But the female connection is special.

The seat for the tube ferrule is of a special design which isobtainable by drilling with a form tool.

This fitting is of one piece construc-tion.It is made of brass. It is tested towithstand pressures beyond burststrength of tubing with which it isused.

Tube Fittings With One Piece Compression Sleeve and Nut

U-81-AA1B

U-81-B1B

U-81-B2B

U-81-D3B

7⁄16

7⁄16

9⁄16

11⁄16

TUBE SIZEA

PART NO.Pipe Size

BNPSF

DIMENSIONS

1⁄81⁄81⁄43/8

C Hex. D27⁄32

3⁄415⁄16

1

E

.505

.505

.649

.793

27⁄64

11⁄32

1⁄27⁄16

G

CONNECTOR, STRAIGHTTUBE TO MALE PIPE

U-84 TUBE UNION

U-84-AB

U-84-BB

U-84-DB

1⁄29⁄16

13⁄16

TUBE SIZE PART NO.DIMENSIONS

3⁄16

1⁄43/8

13⁄4

17⁄8

21⁄2

B C

1

11⁄16

11⁄2

DA

BRASS CONNECTORS FOR STEEL AND NYLON TUBING

ELBOW, TUBE TO MALE PIPE

U-151 PIPE NIPPLES

c9⁄16

9⁄16

11⁄16

U-151-21

U-151-22

U-151-32

13⁄16

13⁄8

113⁄32

PART NO.NOMENCLATURE

1⁄41⁄43⁄8

NPT #2 A1⁄81⁄41⁄4

B7⁄32

5⁄16

5⁄16

NPT #1

Maximum Working Pressure - 1200 PSI

U-152 STREET ELBOW

.188

.266

U-152-A

U-152-B

PART NO.

1⁄81⁄4

1⁄211⁄16

B

.56

.78

CAMale Pipe(NPTF)

1⁄81⁄4

Fem. Pipe(NPTF)

Maximum Working Pressure - 1200 PSI

5

LOW PRESSURE BULK HOSE AND FITTINGS

1. Hose can be ordered in bulk. Specify desired length in feet. Hose is supplied in 50’ coils.

2. Loose Couplings and Unions. Order by part number and state desired quantity.

3. Hose Assemblies. See page 7.

6

HOSE ASSEMBLIES

7

1/8 OD tube x

1/4-28 male

1/8 NPT male

x 1/4-28 male

1/8 NPT male

x 1/4-28 male

Feed line hoseBulk feed line hose and fittings

Model 27729

27740

27741

27742

27743

27733

27734

27735

27736

27737

27738

27739

12

18

24

30

6

8

12

18

24

30

36

1/8� NPT male endconnections

1/8� NPT male at oneend and swivel adapterunion 1/8� NPT male atother end.

Part No. Hose Description�A�(In.)

27712

27713

27714

27715

27716

Steel

1/4-28 female

1/4-28 female

Coupling Nut

Coupling Nut

Hose

Stud

Hose

Stud

Part No. Const. Size(In.)

Description

Stainless

Steel

Designed to easily fabricate any length flex-ible feed line. Hose end connections areassembled with standard tools.

25 ft. coil; 3/16” I.D. x 3/8” O.D. workingpressure = 500 psig. Burst pressure = 2000psig. Minimum bend radius = 2-1/2”.(Bulk Hose 27730 is available. Order anylength in feet.)

Hose End Fittings

1-23/32”

27712

27713

27714

7/8”

7/16”

7/16”HEX

11/16”7/16”

17/32”

Series 27740-27743

27730 Type HoseA

1/8” N.P.T. 1/8” N.P.T.

1/8” N.P.T.

Adapter Union

Series 27733-27739

27730 Type Hose

1/8” N.P.T.

A

FEED LINE HOSE AND FITTINGS

For Complete Hose Assemblies, Order by Hose Assembly Part Number from Following Tables. Specify Length in Inches.

HOSEASSEMBLYNUMBER

COUPLING OR UNION

2nd END1st END

PARTNO.

THREAD(NPTF)

PARTNO.

THREAD(NPTF)

I.D.

MAXIMUMWORKINGPRESSURE

(PSI)

FABRIC BRAID LOW PRESSURE CONSTRUCTION(Temp. Range -40ºF to +200ºF)

U404B1U404B2

1/81/4

U407B1U407B2

UX702C01UX702C02

1/41/4

500500

1/81/4

HOSEASSEMBLYNUMBER

COUPLING OR UNION

2nd END1st END

PARTNO.

THREADSIZE

PARTNO.

THREADSIZE

I.D.

MAXIMUMWORKINGPRESSURE

(PSI)

HIGH PRESSURE CONSTRUCTION(Temp. Range -40ºF to +200ºF)

U43744U43766U43888

1/43/83/4

U43744U43766U43888

UX718402UX718602UX718805

1/43/81/2

500040003500

1/4-183/8-183/4-16

**ASSEMBLY LENGTH ORDER CODE IN INCHES - ADD INCH CODE BELOW TO HOSE ASSEMBLY NUMBER ABOVE - EXAMPLE: UX718402-048036 048 060 072 084 096 108 120

**The code numbers indicate overall length of assembled hose to outside end of fittings in inches and is to be added as a dash-number to the hose assembly.

HOSE ASSEMBLIES FOR BARREL PUMPS

200306 - LUBE SUPPLY HOSE ASSEMBLY FOR ALL STANDARD DUTY PUMPS HOSE SPECS1. WORKING PRESSURE - 5,000 PSI MAXIMUM2. SIZE 1/2” I.D.3. HOSE ASSEMBLY SUPPLIED COMPLETE AS SHOWN

200325 - AIR SUPPLY HOSE ASSEMBLY FOR ALL STANDARD DUTY PUMPS HOSE SPECS1. WORKING PRESSURE - 250 PSI MAXIMUM2. OUTER COVER COLOR YELLOW3. SIZE 1/2” I.D.

72.0

3/8�-18N.P.T.EACHEND 3/4� x JIC 37º (SWIVEL END)

PERMANENTLY ATTACHED -REF

JIC 37º ADAPTER - EACH END

72.0

1/2� N.P.T.REP. 1/4� N.P.T. REP

HOSE ADAPTERS, QUICK COUPLINGS, SWIVELS

8

U-431 ADAPTER,PIPE TO JIC U-997 ANTI-FRICTION

SWIVEL

U-421 PLUG (With or without Check Valve)U-422 SNAP-ON SOCKET COUPLING (With or Without Check Valve)

ANCHOR TEES AND ELLS

9

*MAXIMUM WORKING PRESSURE FOR PIPE ONLY IS 6000 PSI

U-1008DUALINE TUBE TEE

U-1022C ANCHOR TEE PIPE

U-1927ANCHOR ELL(PIPE TO PIPE OR TUBE TO PIPE)

STRAIGHT ANCHOR BLOCK

VALVES

10

U-106263-WAY, NC, SOLENOID VALVE (PNEUMATIC)(NEMA 4 enclosure)

1/15(29.2)

0.41 (10.4)

4.35 (110.6)

2 MTG. HOLES0.026 (6.6) DIA.

1.72 (43.7)1.50

(38.0)

1.75(44.5)2.20

(56.0)

1/2”

NPT

CON

DU

IT C

ON

NEC

TIO

N3/

8” P

IPE

EXH

AU

ST P

ORT INLET AND

OUTLET PORT

1.0226.0

0.93(23.5)

1.16(29.5)

1.81(46.0)

FLOW

PART NO. VOLTAGE HERTZ CV FACTOR.

U-10626-A1

U-10626-C1

U-10626-A5

110/120 VAC

110/120 VAC

24 VDC

50/60

50/60

-

1.4

1.6

1.4

ActionPortSize

(NPTF)NC

NC

NC

1/4

3/8

1/4

Holding Current(AMPS)

IN RUSH (AMPS)

MAXIMUM OPERATINGPRESSURE - 150 PSI

.09

.12

Operating Data� Fluids Air or inert gas� Ambient Temp. Range 0° to 140°F

(-18° to 60°C)� Flow Rating, Cv (avg) 0.18� Orifice 2.0mm� Pressure Range 150 psi max.� Inlet Connection Port 1/8� NPTF� Exhaust Port 1/8� NPTF� Outlet Connection Port 1/8� NPTF

Note: Valve body may be rotated 180° toreverse outlet port orientation.

Electrical Specs� Voltage (V/Hz) 120/60; 110/50, ±10%� Coil Continuous duty,

encapsulated Class F� Current

Inrush 14.8 Volt - amps (0.12 amps)Holding 10.9 Volt - amps (0.09 amps)

� Connection Connector pin assignmentaccording to DIN 43650Form A

� Operation Mode 3 way, 2 position, normally closed

OUTLETPORT 2

OUTLETPORT 2

INLETPORT 1

8

55

60

DIMENSIONIN MM

EXHAUSTPORT 3

OUTLETPORT 2

48

Part No. 20311-33-WAY, NC, SOLENOID VALVE (PNEUMATIC)(NEMA 1 enclosure) 120 VOLT/60 HZ

U-972DSHUT-OFF NEEDLE VALVE

U-129AIR VENT

LB9425ADJUSTABLE FLOW RESTRICTOR

MAXIMUM WORKING PRESSURE: 10,000 PSI @ 70º

MAXIMUM OPERATING TEMPERATURE: 500ºF

USE REDUCER BUSHING U-104D1 FOR 1/8” PIPE;U-104D2 FOR 1/4” PIPE; OR U-104D3 FOR 3/8” PIPE.

NOTE: VAL-13117A IS SIMILAR TO ABOVE EXCEPT 1/4” NPT

SHUT-OFF / ZONE CONTROL VALVES

11

Zone Control Valves are typically used to isolate certain sections on amachine to receive more/less frequent lube cycles. Farval offers a fullrange of zone control valves to satisfy a variety of requirements.

STYLE:• MCZ2501F series for oil systems operating up to 1500 psi• MCZ2501A series for oil systems operating between 1500 and 3000 psi• MCZ2503B series for all grease systems operating up to 3000 psi

Inrush Current .21 amp .21 amp .17 ampPower 20 watts 20 watts 20 wattsLead Length 24 in. 24 in. 18 in.

Series MCZ2501F

ELECTRICAL SPECIFICATIONS

MCZ2501A MCZ2503B

ZONE CONTROL VALVE SELECTION CHART

For oil systems below 1500 psi: *MCZ2501FFor oil systems above 1500 psi: *MCZ2501AFor all grease systems: *MCZ2503B*Note: Above are normally closed. If required, normally open can be supplied. Contact factory.

1. - Seal material: 2 - Electrical connector: 3. - Voltage: 4 - Port size:00-nitrile DL-conduit 11-115 VAC 50/60 hz N - 1/4-18 NPTF inlet and dischargeV0-viton HC-Hirschmann 24-24 VDC S - #6 SAE (3/8 OD tube) inlet and discharge

BH-Automotive

1 2 3 4

NOTES:1. Inrush current rating at 115 VAC 60 hertz.2. All AC coils contain full wave rectifiers.

EXAMPLES:• For a remote zone control in a grease system, nitrile seals, a Hirschmann connector, 24 volt DC current, and with NPTF ports,

order MCZ2503B00HC24N.

MCZ2503B - Grease

2.50”

5.60”

3.32”

2.00”

MCZ2501 - Oil

CROUSE HINDS/BRAD HARRISON AUTOMOTIVE-TYPE ELECTRICAL CONNECTORSWITH MOLDED CABLEThese feature molded 3 pin automotive connectors and are used with Farval typeBH zone control valves. The 3-conductor cables are yellow PVC insulated STOrated at 10 amps and 300 volts. The plugs have NEMA 6P, IP68 protection.

MCC2505A - 6 feetMCC2505B - 12 feet

Available with indicator lamps for 115 volt systems.To be used with customer P.L.C. or DCS controllers only.

MCC506A - 6 feetMCC2506B - 12 feet

HIRSCHMAN-TYPE ELECTRICAL CONNECTORSThese connectors, made to DIN 43650 specifications, are used with Farval type HC zone controlvalves. They include all hardware including gaskets. They are rated at 250 VAC and 16 amperes.

MCC2509A: For Farval MCZ2501 series control valves. DIN 43650 Form B 11 mm blades. 1.12”by .82”.

MCC2510A: For Farval MCZ2503 series zone control valves. DIN 43650 Form A. 1.08” square.

MCC2505

MCC2509A

MCC2510A

ELECTRICAL ACCESSORIES FOR ZONE CONTROL VALVES AND CYCLE SWITCHES

CHECK VALVES AND MISCELLANEOUS ACCESSORIES

12

U-10930-1 CHECK VALVE U-1732 INDICATOR COVER FOR DUALINE VALVES

U-1975 CHECK VALVES FOR DISCHARGE PORTSOF DUALINE MEASURING VALVESAND SINGLELINE VALVE MANIFOLDS

U-1972BLINE CHECK VALVE - BRASS BODYOIL & GREASE APPLICATIONS

U-987SPRAY NOZZLE ADAPTER(FOR WALL MOUNTING U922C)

U-922CSPRAY NOZZLE ASSEMBLIES

1.19”

.77”

1/8” PIPE THREAD

1/8” PIPE TAP

RELIEF VALVES AND STRAINERS

13

*BasicLetter

Identification

PipeTapSize

Dirty ScreenIndicatorOption

Dirty Screen(Usage at

Minimum OperatingTemperature

**MicroSwitchOption

*LS - �LineStrainer�

02 - 1Ú4�03 - 3Ú8�

1 - withoutindicator2 - with

indicator

03 - 25 micron screen(oil only up to

500 SSU)06 - 150 micron screen

(oil only up to2000 SSU)

20 - 500 micron screen(oil over 2000 SSU & all

grease

No Number-

No microswitch

5 - microswitch

TYPICAL ORDERING CODELS - 02 2 03 5

*This must appear in all orders for strainer assemblies.**Micro Switch available ONLY with Dirty Screen Indicator (2 Option).Example: LS-03-120 is the order code for a 3/8� P.T. Strainer without

indicator and with a 500 micron screen.

REPLACEMENT SCREENS

Part No. DESCRIPTION

LS-02-05-103

LS-02-05-106

LS-02-05-120

25 MICRON SCREEN (OIL ONLY UP TO 500 SSU)

150 MICRON SCREEN (OIL ONLY UP TO 2000 SSU)

500 MIICRON SCREEN (OIL OVER 2000 SSU & ALL GREASE)

U-962 RELIEF FITTING U-10903 RELIEF VALVERIGHT ANGLE (EXTERNALLY ADJUSTABLE)

STRAINERS

14

ELECTRIC SWITCHES

U-620 PRESSURE SWITCHSINGLE POLE DOUBLE THROW(OIL OR GREASE) (NEMA 3 enclosure)

ALL VALUES P.S.I.G.

Electrical rating (continuous inductive):10 amps. 125, 250 or 460 V. AC., 15 amps. 6 V. DC.

Contact symbol:

U-623 PRESSURE SWITCHSINGLE POLE DOUBLE THROW (PNEUMATIC)

U-663-6 PRESSURE SWITCHSINGLE POLE DOUBLE THROW(OIL OR GREASE)

PURPLERED

BLUEWire Coding: Red = N.O., Blue = N.C., Purple = Common

Electrical rating (continuous inductive):15 amps. 110 V. AC., 10 amps. 220 V. AC., 6 amps.440 V. AC., 0.25 amps. 115 V. DC.

Contact Symbol:

1/4”-28 N.F.ADJUSTMENTSCREW

1/4” NPT INLET

NEMA 3ENCLOSURE(WEATHER-PROOF)

PartNumber

ProofPressure

Adjustable Range

Decreasing Increasing

ActuationValue

(Differential)Approx.

U-620-DI 7000 250 2775 280 3000 30-225

Min. Max. Min. Max.

1/2” -14 NPTF

3/8” NPTF

NEMA 4 & 13ENCLOSURE-OILTIGHT

MaximumSurge

Pressure

ActuationDifferential

Operating Pressure(Adjustable)

Min. Max.

10,000 210 - 400

Adjustable Range

Decreasing IncreasingActuation Value

(Differential)Approx.

1.5 144.8 1.5

Min. Max. Min. Max.

150 2.2 - 5.2

1/2” N.P.S. CONDUIT CONNECTION

PRESSURE PORT1/4” N.P.T.

PROOF PRESSURE - 300

3-31/32

NEMA 4 ENCLOSURE (WATERTIGHT) MOUNTING BRACKETMAY BE ROTATED 90º OR 180ºFROM POSITION SHOWN.SET AT FACTORY SO THAT NCCONTACTS CLOSE AT 60 PSI ONDECREASING PRESSURE

400 3000

4-9/16”

6-3/

4”M

AX

3-1/

16”4-3/8”

2”

3-1/2”

2-23/32”

2-23/32”

7”

ALL VALUES P.S.I.G.

Electrical Rating (continuous inductive):10 amps. 125 or 250 V. AC., 3 amps. 460 V. AC., 5 amps. 28 V. DC.

Contact Symbol:

U-625 EXPLOSION-PROOF SWITCH(NEMA 7 and 9 enclosure)

NOTE: ALL MOUNTING SCREW HOLESNO. 10-32 UNF-2B THREAD.

7/32” MIN. DEPTH.

U.L. CONTACT RATING 15A AT 125,250, OR 450 VOLTS, AC.

SWITCH FURNISHED WITHOUTMOUNTING PLATE AND SCREWS.

ROLLER LEVER MAY BE POSITIVELYLOCKED AT INTERVALS OF APPROX. 0.2º(1980 POSITIONS) ADJUSTABLE 360º.

15

ELECTRIC SWITCHES AND HORNS

U-10623 SWITCH S.P.D.T. (NEMA 1 enclosure)

U-914A SIGNAL HORN (NEMA 1 enclosure)

16

AIR CONTROL PANELS - GAUGES - F.R.L. - MISCELLANEOUS

LD-7767C AIR CONTROL PANEL - REMOTE U-902 PRESSURE GAUGE

Air regulators and gauges—Mounting brackets

Filters

Filter, regulator, lubricator combo

Lubricators

Model F9761/2” Regulator with 0-250 psi rangeand 2”, 0-160 pressure gauge.

Model F973Same as F976 except 3/8”.

Model F9781/2” FilterModel F9753/8” Filter

Model F9851/2” Filter, regulator (0-250 psi)gauge (2”, 0-160 psi), lubricator.Model F984Same as F985 except 3/8”.Model F989Mount kit for combo units.

Model F9771/2” LubricatorModel F9743/8” Lubricator

Low level switch kit for 120/400 lb drums

Model LC10243 - for 120 lb drum

Model LC11036 - for 400 lb drum

Notes:(1) Requires cover and follower plate - order separately.(2) Customer/user to provide 15/16” hole in cover.(3) Can be used with any style/make pump.

Mini filter, regulator, lubricator

Model F9951/4” FRL combo.Model F9911/4” Mini regulator and gauge.Model F9921/4” Mini lubricator.Model F9931/4” Mini filter.Model F996Mini wall mount bracket.

Part Number F-111

For HD Series Pumps. Air-operatedhoist lifts and lowers pumps for fastand easy drum changes. Hoist armadjusts for different pump heights andswings a full 360º. Push/pull air valvecontrols hoist. 11-1/2” base bolts tofloor.

Unit height is 62-1/8” (lowered) and 98-5/8” (raised).

Air inlet is 1/4” NPTF (m).

Maximum air pressure is 150 psi.

PUMP HOIST

OperationBrush Assemblies are suitable for lubricating various movingmachine components such as: chains, gears, cams, etc. Meteredoil flow to each brush may be governed by an injector, dividervalve, or Dualine® valve.

Technical Data• Bristle Material .012” diameter black nylon• Temperature Range -30ºF to +200ºF

InstallationBristle end of brush must be below inlet connection. Mount se-curely to avoid vibration.

Bulkhead Mounted Brush Assembly Part No.

1/8” Pipe Tap Female . . . . . . . . . . . . . . . B7492

Brush Assembly, Part No. B7490

Brush Assembly, Part No. B7488

2 1/4”

1/8” NPT 3/4”

2 7/8”

3/4”1/2” sq.

2 3/4”

3/4”

BRUSHES

9/16-18“ Male Thread

17

1/8” N.P.T. Male 1/8” N.P.T. Male

1“ dia

1-7/8“ 1-7/8“

1-3/4“ x 3/8“

803-11 BRUSH 803-10 BRUSH

1/8” NPT

Farval ®

Hose Reels

Grease Fittings

Grease GunsOil and Grease Barrel Pumps

GENERAL LUBRICATION SOLUTIONS!Farval offers a complete line of air operated barrel pumps, hose reels, grease guns, and grease fittingsfor maintenance areas or production equipment.

Barrel pumps for oil and grease are available in ratios from 1:1 to 55:1. Container sizes include: 5-gallon,120, 400 pound and stub pumps in standard and stainless steel. All barrel pumps include a built in air exhaust muffler. All grease pumps have an integral grease strainerat the lube inlet.

Hose reels are offered in standard and heavy duty models. They are sold as bare units or supplied withup to 60 feet of 1/2” hose. Control valve, swivel and miscellaneous hose reel accessories are also avail-able.

Grease guns are available in standard lever, pistol grip and air operated versions.

Grease Fittings are available in every standard configuration in either NPT or metric (mm) sizes.

For additional information, please contact your nearest distributor or call Farval at 1-800-227-1063, ext. 25.

Farval® Lubrication Systems, Inc.A SUBSIDIARY OF VESPER CORPORATION

2685 Airport Road • Kinston, NC 28504 • Tel. 800-227-1063 • Fax: 252-527-9232website: www.farval.com • e-mail: farval@icomnet.com

Delimon®