Upload
others
View
3
Download
0
Embed Size (px)
Citation preview
103
CAMLO
CKS
FITTINGS – CAMLOCKS
STANDARD
SPECIALTY
SCROLL TAIL
COMPOSITE TAILS, FERRULES & SEALS
INDUSTRIAL CRIMP FERRULES
SAFETY BUMPS
SPARE PARTS
HOSES
PNEUMATIC
SHOSE R
EELS
RUBBER
ACCE
SSORIES &
CO
NSUMABLE
SCH
ARTS &
TA
BLE
S
FITTINGS –CAMLOCKS STANDARD
104
CAMLO
CKS
HOSES
PNEUMATICS
HOSE R
EELS
RUBBER
ACC
ESSORIES &
CO
NSUMABLE
SCH
ARTS &
TABLE
S
Powell Power Facts: Camlock Information
Camlock Working Pressures
Camlock Material Descriptions
All Powell Industrial camlocks are produced to the NATO Standard, unless specified, and are interchangeable with each other.
Australian Standard and API (American Petroleum Institute) camlocks do not interchange with NATO Standard camlocks, only with themselves.
Poly camlocks while being produced to the NATO Standard may not interchange with other manufactures Poly camlocks.
Size(mm)
Material & Working Pressure
Aluminium, Stainless Steel, Bronze & Brass Polypropylene & Nyglass
15 150 psi 125 psi
20–50 150 psi 125 psi
65 150 psi 100 psi
75 125 psi 75 psi
100 100 psi 75 psi
125 & 150 75 psi N/A
Material Typical Application Description
ALUMINIUMDIE-CAST General use / Agricultural / Industrial
Manufactured using the Die-casting method.This is the most common / economical of the
Aluminium range used for general Air / Water applications.
ALUMINIUMHEAVY DUTY
Petro-chemical industry/ Military /
Heavy Duty Industrialapplications
Manufactured by the Gravity-cast method. Fully weldable. Heat treated to increase strength. The possibility of camlocks 'deforming or going oval'
when dropped regularly is greatly reduced.
BRASS Offshore / Coal Mining / Fire Brigade Manufactured using Die-cast method.
POLYPROPYLENE(BLACK)
Agricultural Spraying Equipment / Chemical Industry
Used extensively throughout the chemical and agricultural sector.
NYGLASS(YELLOW)
Agricultural Spraying Equipment / Chemical Industry Glass Filled Nylon. Alternative to Polypropylene.
STAINLESS STEEL316 Food Industry / Offshore / Chemical Industry Sand Cast Stainless Steel. Fully weldable.
INSTA-LOCK ALUMINIUM & SS 316 Transport / Chemical Industry
These have locking arms that eliminate the risk of the arms opening during times of vibration or when being dragged. Easy to open and close. Crimp shells & crimp specifications available.
Pressures to be used as a guide only. Please consult your local Powell Industrial branch where critical applications are concerned. For higher pressures use Continental Insta-Locks.
FITTINGS –CAMLOCKS STANDARD
105
CAMLO
CKS
HOSES
PNEUMATIC
SHOSE R
EELS
RUBBER
ACCE
SSORIES &
CO
NSUMABLE
SCH
ARTS &
TA
BLE
S
Type A Male Camlock x Female BSP
Size (Inches)
Material
Aluminium Stainless Steel Brass Poly Nyglass
1/2 20-000-A050 20-200-A050 - - -
3/4 20-000-A075 20-200-A075 - 20-500-A075 20-600-A075
3/4 x 1/2 20-000-A075050 - - 20-500-A075050 20-600-A075050
1 20-000-A100 20-200-A100 - 20-500-A100 20-600-A100
1¼ 20-000-A125 20-200-A125 - 20-500-A125 20-600-A125
1½ 20-000-A150 20-200-A150 20-300-A150 20-500-A150 20-600-A150
1½ x 2 20-000-A150200 - - - -
2 20-000-A200 20-200-A200 20-300-A200 20-500-A200 20-600-A200
2 x 1½ 20-000-A200150 - - - -
2 x 3 20-000-A200300 - - - -
2½ 20-000-A250 20-200-A250 20-300-A250 20-500-A250 -
2½ x 2 20-000-A250200 - - - -
3 20-000-A300 20-200-A300 20-300-A300 20-500-A300 20-600-A300
3 x 2 20-000-A300200 - - - -
3 x 2½ 20-000-A300250 - - - -
3 x 4 20-000-A300400 - - - -
4 20-000-A400 20-200-A400 20-300-A400 20-500-A400 20-600-A400
4 x 2½ 20-000-A400250 - - - -
4 x 3 20-000-A400300 - - - -
5 20-000-A500 20-200-A500 - - -
6 20-000-A600 20-200-A600 20-300-A600 - -
6 x 4 20-000-A600400 - - - -
8* 20-000-A800 - - - -
Type A Male Camlock x Female NPT also available to order. Part Number Prefix 20-010-AType A Australian Standard camlocks also available to order. Part Number Prefix 20-120-A
*Not made to NATO specification and generally will not interchange with different manufacturers ½, 5 & 8 inch camlocks. Please check with your local Powell Industrial branch for furtehr clarification.
FITTINGS –CAMLOCKS STANDARD
106
CAMLO
CKS
HOSES
PNEUMATICS
HOSE R
EELS
RUBBER
ACC
ESSORIES &
CO
NSUMABLE
SCH
ARTS &
TABLE
S
Type CFemale Camlock x Hose Tail
NB: Aluminium, Brass & Stainless Steel camlocks now have crimped collars as standard.
Size (Inches)
Material
Aluminium(Crimp Tail)
Stainless Steel(Crimp Tail)
Brass(Crimp Tail) Poly Nyglass
1/2 20-000-C050 20-200-C050 - - -
3/4 20-000-C075 20-200-C075 - 20-500-C075 20-600-C075
3/4 x 1/2 20-000-C075050 - - 20-500-C075050 20-600-C075050
1 20-000-C100 20-200-C100 - 20-500-C100 20-600-C100
1¼ 20-000-C125 20-200-C125 - 20-500-C125 20-600-C125
1½ 20-000-C150 20-200-C150 20-300-C150 20-500-C150 20-600-C150
2 20-000-C200 20-200-C200 20-300-C200 20-500-C200 20-600-C200
2 x 1½ 20-000-C200150 - - - -
2½ 20-000-C250 20-200-C250 20-300-C250 20-500-C250 -
2½ x 2 20-000-C250200 - - - -
3 20-000-C300 20-200-C300 20-300-C300 20-500-C300 20-600-C300
3 x 2 20-000-C300200 - - - -
3 x 2½ 20-000-C300250 - - - -
4 20-000-C400 20-200-C400 20-300-C400 20-500-C400 20-600-C400
4 x 3 20-000-C400300 - - - -
5 20-000-C500 20-200-C500 - - -
6 20-000-C600 20-200-C600 20-300-C600 - -
8* 20-000-C800 - - - -
Type C Female Camlock x Male NPT also available to order. Part Number Prefix 20-010-CType C Australian Standard camlocks also available to order. Part Number Prefix 20-120-C
*Not made to NATO specification and generally will not interchange with different manufacturers ½, 5 & 8 inch camlocks. Please check with your local Powell Industrial branch for further clarification.
Type BFemale Camlock x Male BSPT
Size (Inches)
Material
Aluminium Stainless Steel Brass Poly Nyglass
1/2 20-000-B050 20-200-B050 - - -
3/4 20-000-B075 20-200-B075 - 20-500-B075 20-600-B075
3/4 x 1/2 20-000-B075050 - - 20-500-B075050 20-600-B075050
1 20-000-B100 20-200-B100 - 20-500-B100 20-600-B100
1¼ 20-000-B125 20-200-B125 - 20-500-B125 20-600-B125
1½ 20-000-B150 20-200-B150 20-300-B150 20-500-B150 20-600-B150
2 20-000-B200 20-200-B200 20-300-B200 20-500-B200 20-600-B200
2 x 1½ 20-000-B200150 - - - -
2½ 20-000-B250 20-200-B250 20-300-B250 20-500-B250 -
3 20-000-B300 20-200-B300 20-300-B300 20-500-B300 20-600-B300
3 x 2 20-000-B300200 - - - -
3 x 2½ 20-000-B300250 - - - -
3 x 4 20-000-B300400
4 20-000-B400 20-200-B400 20-300-B400 20-500-B400 20-600-B400
4 x 3 20-000-B400300 - - - -
5 20-000-B500 - - - -
6 20-000-B600 20-200-B600 20-300-B600 - -
8* 20-000-B800 - - - -
Type B Female Camlock x Male NPT also available to order. Part Number Prefix 20-010-BType B Australian Standard camlocks also available to order. Part Number Prefix 20-120-B
*Not made to NATO specification and generally will not interchange with different manufacturers ½, 5 & 8 inch camlocks. Please check with your local Powell Industrial branch for further clarification.
FITTINGS –CAMLOCKS STANDARD
107
CAMLO
CKS
HOSES
PNEUMATIC
SHOSE R
EELS
RUBBER
ACCE
SSORIES &
CO
NSUMABLE
SCH
ARTS &
TA
BLE
S
Type DFemale Camlock x Female BSP
Size (Inches)
Material
Aluminium Stainless Steel Brass Poly Nyglass
1/2 20-000-D050 20-200-D050 - - -
3/4 20-000-D075 20-200-D075 - 20-500-D075 20-600-D075
3/4 x 1/2 20-000-D075050 - - - -
1 20-000-D100 20-200-D100 - 20-500-D100 20-600-D100
1¼ 20-000-D125 20-200-D125 - 20-500-D125 20-600-D125
1½ 20-000-D150 20-200-D150 20-300-D150 20-500-D150 20-600-D150
2 20-000-D200 20-200-D200 20-300-D200 20-500-D200 20-600-D200
2 x 1½ 20-000-D200150 - - - -
2½ 20-000-D250 20-200-D250 20-300-D250 20-500-D250 -
2½ x 2 20-000-D250200 - - - -
3 20-000-D300 20-200-D300 20-300-D300 20-500-D300 20-600-D300
3 x 2 20-000-D300200 - - - -
4 20-000-D400 20-200-D400 20-300-D400 20-500-D400 20-600-D400
4 x 3 20-000-D400300
5 20-000-D500 - - - -
6 20-000-D600 20-200-D600 20-300-D600 - -
8* 20-000-D800 - - - -
Type D Female Camlock x Female NPT also available to order. Part Number Prefix 20-010-DType D Australian Standard camlocks also available to order. Part Number Prefix 20-120-D
*Not made to NATO specification and generally will not interchange with different manufacturers ½, 5 & 8 inch camlocks. Please check with your local Powell Industrial branch for further clarification.
Type E Male Camlock x Hose Tail
NB: Aluminium, Brass & Stainless Steel camlocks now have crimped collars as standard.
Size (Inches)
Material
Aluminium(Crimp Tail)
Stainless Steel(Crimp Tail)
Brass(Crimp Tail) Poly Nyglass
1/2 20-000-E050 20-200-E050 - - -
3/4 20-000-E075 20-200-E075 - 20-500-E075 20-600-E075
1 20-000-E100 20-200-E100 - 20-500-E100 20-600-E100
1¼ 20-000-E125 20-200-E125 - 20-500-E125 20-600-E125
1½ 20-000-E150 20-200-E150 20-300-E150 20-500-E150 20-600-E150
2 20-000-E200 20-200-E200 20-300-E200 20-500-E200 20-600-E200
2 x 1½ 20-000-E200150 - - - -
2½ 20-000-E250 20-200-E250 20-300-E250 - -
3 20-000-E300 20-200-E300 20-300-E300 20-500-E300 20-600-E300
3 x 2 20-000-E300200 - - - -
3 x 2½ 20-000-E300250 - - - -
4 20-000-E400 20-200-E400 20-300-E400 20-500-E400 20-600-E400
4 x 3 20-000-E400300 - - - -
5 20-000-E500 - - - -
6 20-000-E600 20-200-E600 20-300-E600 -
8* 20-000-E800 - - - -
Type E Australian Standard camlocks also available to order. Part Number Prefix 20-120-E *Not made to NATO specification and generally will not interchange with different manufacturers ½, 5 & 8 inch camlocks.
Please check with your local Powell Industrial branch for further clarification.
FITTINGS –CAMLOCKS STANDARD
108
CAMLO
CKS
HOSES
PNEUMATICS
HOSE R
EELS
RUBBER
ACC
ESSORIES &
CO
NSUMABLE
SCH
ARTS &
TABLE
S
Type FMale Camlock x Male BSPT
Size (Inches)
Material
Aluminium Stainless Steel Brass Poly Nyglass
1/2 20-000-F050 20-200-F050 - - -
3/4 20-000-F075 20-200-F075 - 20-500-F075 20-600-F075
3/4 x 1/2 20-000-F075050 - - - -
1 20-000-F100 20-200-F100 - 20-500-F100 20-600-F100
1¼ 20-000-F125 20-200-F125 - 20-500-F125 20-600-F125
1½ 20-000-F150 20-200-F150 20-300-F150 20-500-F150 20-600-F150
1½ x 2 20-000-F150200 - - - -
2 20-000-F200 20-200-F200 20-300-F200 20-500-F200 20-600-F200
2 x 1½ 20-000-F200150 - - - -
2½ 20-000-F250 20-200-F250 20-300-F250 20-500-F250 -
2½ x 2 20-000-F250200 - - - -
3 20-000-F300 20-200-F300 20-300-F300 20-500-F300 20-600-F300
3 x 2 20-000-F300200 - - - -
3 x 4 20-000-F300400 - - - -
4 20-000-F400 20-200-F400 20-300-F400 20-500-F400 20-600-F400
4 x 3 20-000-F400300 - - - -
5 20-000-F500 - - - -
6 20-000-F600 20-200-F600 20-300-F600 - -
8* 20-000-F800 - - - -
Type F Male Camlock x Male NTP also available to order. Part Number Prefix 20-010-FType F Australian Standard camlocks also available to order. Part Number Prefix 20-120-F
*Not made to NATO specification and generally will not interchange with different manufacturers ½, 5 & 8 inch camlocks. Please check with your local Powell Industrial branch for further clarification.
Type DCCamlock Dust Cap
Size (Inches)
Material
Aluminium Stainless Steel Brass Poly Nyglass
1/2 20-000-DC050 20-200-DC050 - - -
3/4 20-000-DC075 20-200-DC075 - 20-500-DC075 20-600-DC075
1 20-000-DC100 20-200-DC100 - 20-500-DC100 20-600-DC100
1¼ 20-000-DC125 20-200-DC125 - 20-500-DC125 20-600-DC125
1½ 20-000-DC150 20-200-DC150 20-300-DC150 20-500-DC150 20-600-DC150
2 20-000-DC200 20-200-DC200 20-300-DC200 20-500-DC200 20-600-DC200
2½ 20-000-DC250 20-200-DC250 20-300-DC250 20-500-DC250 -
3 20-000-DC300 20-200-DC300 20-300-DC300 20-500-DC300 20-600-DC300
4 20-000-DC400 20-200-DC400 20-300-DC400 20-500-DC400 20-600-DC400
5 20-000-DC500 20-200-DC500 - - -
6 20-000-DC600 20-200-DC600 - - -
8* 20-000-DC800 - - - -
Type DC Australian Standard camlocks also available to order. Part Number Prefix 20-120-DC *Not made to NATO specification and generally will not interchange with different manufacturers ½, 5 & 8 inch camlocks.
Please check with your local Powell Industrial branch for further clarification.
FITTINGS –CAMLOCKS STANDARD
109
CAMLO
CKS
HOSES
PNEUMATIC
SHOSE R
EELS
RUBBER
ACCE
SSORIES &
CO
NSUMABLE
SCH
ARTS &
TA
BLE
S
Type DCLCamlock Dust Cap – Locking
Size (Inches)
Material & Type
Aluminium Heavy Duty
1½ 20-000-DCL150
2 20-000-DCL200
2½ 20-000-DCL250
3 20-000-DCL300
4 20-000-DCL400
6 20-000-DCL600
Type DPCamlock Dust Plug
Size (Inches)
Material
Aluminium Stainless Steel Brass Poly Nyglass
1/2 20-000-DP050 20-200-DP050 - - -
3/4 20-000-DP075 20-200-DP075 - 20-500-DP075 20-600-DP075
1 20-000-DP100 20-200-DP100 - 20-500-DP100 20-600-DP100
1¼ 20-000-DP125 20-200-DP125 - 20-500-DP125 20-600-DP125
1½ 20-000-DP150 20-200-DP150 20-300-DP150 20-500-DP150 20-600-DP150
2 20-000-DP200 20-200-DP200 20-300-DP200 20-500-DP200 20-600-DP200
2½ 20-000-DP250 20-200-DP250 20-300-DP250 20-500-DP250 -
3 20-000-DP300 20-200-DP300 20-300-DP300 20-500-DP300 20-600-DP300
4 20-000-DP400 20-200-DP400 20-300-DP400 20-500-DP400 20-600-DP400
5 20-000-DP500 20-200-DP500 - - -
6 20-000-DP600 20-200-DP600 - - -
8* 20-000-DP800 - - - -
Type DP Australian Standard camlocks also available to order. Part Number Prefix 20-120-DP *Not made to NATO specification and generally will not interchange with different manufacturers ½, 5 & 8 inch camlocks.
Please check with your local Powell Industrial branch for further clarification.
Type AAMale Camlock x Male Camlock
Size (Inches)
Material
Aluminium Heavy Duty Stainless Steel
1 20-000-AA100 20-200-AA100
1¼ 20-000-AA125 -
1½ 20-000-AA150 -
2 20-000-AA200 20-200-AA200
2 x 1½ 20-000-AA200150 -
2½ 20-000-AA250 -
2 ½ x 2 20-000-AA250200 -
3 20-000-AA300 20-200-AA300
3 x 2 20-000-AA300200 -
3 x 2½ 20-000-AA300250 -
4 20-000-AA400 20-200-AA400
4 x 2 20-000-AA400200 -
4 x 3 20-000-AA400300 -
6 20-000-AA600 -
6 x 4 20-000-AA600400 -
FITTINGS –CAMLOCKS SPECIALITY
110
CAMLO
CKS
HOSES
PNEUMATICS
HOSE R
EELS
RUBBER
ACC
ESSORIES &
CO
NSUMABLE
SCH
ARTS &
TABLE
S
Type BC (Bent C 68°)Female Camlock x Hose Tail
Size (Inches)
Material
Aluminium Heavy Duty
2 x 68° 20-000-BC68200
2½ x 68° 20-000-BC68250
3 x 68° 20-000-BC68300
4 x 68° 20-000-BC68400
Type BC (Bent C 90°)Female Camlock x Hose Tail
Size (Inches)
Material
Aluminium Heavy Duty
2 x 90° 20-000-BC90200
2½ x 90° 20-000-BC90250
3 x 90° 20-000-BC90300
4 x 90° 20-000-BC90400
Type DDFemale x Female
Size (Inches)
Material
Aluminium Heavy Duty
2 x 2 20-000-DD200
3 x 3 20-000-DD300
3 x 2 20-000-DD300200
4 x 4 20-000-DD400
4 x 3 20-000-DD400300
Male Bent C 68° x Hose Tail also available to order. Part Number Prefix 20-00-BE
FITTINGS –CAMLOCKS SPECIALITY
111
CAMLO
CKS
HOSES
PNEUMATIC
SHOSE R
EELS
RUBBER
ACCE
SSORIES &
CO
NSUMABLE
SCH
ARTS &
TA
BLE
S
Size (Inches)
Aluminium Heavy Duty Stainless Steel
Drilled Table D/E Undrilled Drilled Table D/E Undrilled
2 20-000-LAD200 20-000-LAU200 20-200-LAD200 20-200-LAU200
2½ 20-000-LAD250 20-000-LAU250 - -
3 20-000-LAD300 20-000-LAU300 20-200-LAD300 20-200-LAU300
4 20-000-LAD400 20-000-LAU400 20-200-LAD400 20-200-LAU400
6 20-000-LAD600 20-000-LAU600 20-200-LAD600 20-200-LAU600
Type LAMale Camlock with Flange
Size (Inches)
Aluminium Stainless Steel
Undrilled Drilled Table D/E
2 20-000-LCD200 20-200-LCD200
3 20-000-LCD300 20-200-LCD300
4 20-000-LCD400 20-200-LCD400
6 20-000-LCD600 20-200-LCD600Type LCFemale Camlock with Flange
Size (Inches)
Material
Aluminium
2 x 2 20-000-HA200
3 x 2 20-000-HA300200
3 x 3 20-000-HA300300
4 x 3 20-000-HA400300
Hydrant Adaptor CamlockMale x Female
Size (Inches)Female x Male
Material
Aluminium Heavy Duty Stainless Steel
2 x 1½ 20-000-CA200150 -
2 x 3 20-000-CA200300 -
2 x 4 20-000-CA200400 -
2½ x 2 20-000-CA250200 -
3 x 2 20-000-CA300200 20-200-CA300200
3 x 2½ 20-000-CA300250 -
3 x 4 20-000-CA300400 -
4 x 2 20-000-CA400200 -
4 x 2½ 20-000-CA400250 -
4 x 3 20-000-CA400300 20-200-CA400300
4 x 6 20-000-CA400600 -
6 x 4 20-100-CA600400 -
Type C/AFemale Camlock x Male Camlock
FITTINGS –CAMLOCKS SPECIALITY
112
CAMLO
CKS
HOSES
PNEUMATICS
HOSE R
EELS
RUBBER
ACC
ESSORIES &
CO
NSUMABLE
SCH
ARTS &
TABLE
S
Size (Inches) Type Part Number
1 A - Buttress Thread 20-520-A100
1½ A - Buttress Thread 20-520-A150
2 A - Buttress Thread 20-520-A200
2 A -Buttress Thread Short 20-520-AS200
IBC Tank Adaptors Poly Camlocks
American Petroleum Institute Camlocks
Size (Inches) Type & Material Part Number
6 x 3 API ADPTOR - Aluminium 20-180-CA600300
6 x 4 API ADAPTOR - Aluminium 20-180-CA600400
6 API DUST CAP - Aluminium 20-180-DC600
6 API ADPTOR GASKET 20-180-G600
Dry Disconnect Couplers (Kamvaloc's) also available on request from your local Powell Industrial Branch.
Male x Weld On Camlocks – Type AWMale Camlock x Socket Weld
Size (Inches)
Material
Aluminium NATO Aluminium Aust. Standard Stainless Steel NATO
2 - - 20-200-AW200
2½ - - 20-200-AW250
3 - - 20-200-AW300
4 20-000-AW400 20-120-AW400 20-200-AW400
FITTINGS –CAMLOCKS SPECIALITY
113
CAMLO
CKS
HOSES
PNEUMATIC
SHOSE R
EELS
RUBBER
ACCE
SSORIES &
CO
NSUMABLE
SCH
ARTS &
TA
BLE
S
FITTINGS –CAMLOCKS COMPOSITE HOSE TAILS
113
CAMLO
CKS
Dry Disconnect Couplers (Kamvaloc's) also available on request from your local Powell Industrial Branch.
Continental Insta-Lock Camlocks – Type C Female Camlock x Hose Tail
Size (Inches)
Insta-Lock
Aluminium Stainless Steel
1 20-150-C100 20-251-C100
1¼ 20-150-C125 20-251-C125
1½ 20-150-C150 20-251-C150
2 20-150-C200 20-251-C200
2½ 20-150-C250 20-251-C250
3 20-150-C300 20-251-C300
4 20-150-C400 20-251-C400
Continental Insta-Lock Camlocks – Type EMale Camlock x Hose Tail
Powell Power Facts Continental Insta-Lock™:
The innovative Insta-Lock Cam and Groove Coupling System is the culmination of years of laboratory research and in-the-field experience. The result is an amazingly durable, reliable and secure coupling system suitable for numerous industrial hose applications. Insta-Lock has 10 unique features that make it the preferred coupling system for operators looking for greater convenience, security and productivity.
Size (Inches)
Insta-Lock
Aluminium Stainless Steel
1 20-150-E100 20-251-E100
1¼ 20-150-E125 20-251-E125
1½ 20-150-E150 20-251-E150
2 20-150-E200 20-251-E200
2½ 20-150-E250 20-251-E250
3 20-150-E300 20-251-E300
4 20-150-E400 20-251-E400
For use with industrial ferrules. Part Number Prefix 19-310
For use with industrial ferrules. Part Number Prefix 19-310
FITTINGS –CAMLOCKS SPECIALITY
114
CAMLO
CKS
HOSES
PNEUMATICS
HOSE R
EELS
RUBBER
ACC
ESSORIES &
CO
NSUMABLE
SCH
ARTS &
TABLE
S
FITTINGS –CAMLOCKSCOMPOSITE HOSE TAILS
114
CAMLO
CKS
HOSES
PNEUMATICS
HOSE R
EELS
RUBBER
Continental Insta-Lock Camlocks – Type DCFemale
Size (Inches)
Insta-Lock
Aluminium Stainless Steel
1 20-150-DC100 20-251-DC100
1¼ 20-150-DC125 20-251-DC125
1½ 20-150-DC150 20-251-DC150
2 20-150-DC200 20-251-DC200
3 20-150-DC300 20-251-DC300
4 20-150-DC400 20-251-DC400
Full range of B, D & DCs are available to order.
Industrial Crimp Ferrules304 Stainless Steel for use with Camlocks, Tails or Industrial crimp tails.
(Use ferrules on page 118 for code hoses).
Can't find the size you require? Please contact your local Powell Industrial branch for assistance.
Part NumberSize
Suit Hose ID (inches) Ferrule - Internal ID (mm)
19-310-008-100 1/2 25.0
19-310-008-104 1/2 27.0
19-310-012-116 3/4 31.8
19-310-012-120 3/4 33.3
19-310-012-124 3/4 34.9
19-310-012-128 3/4 36.5
19-310-016-132 1 38.1
19-310-016-136 1 39.7
19-310-016-144 1 42.9
19-310-020-144 1¼ 42.9
19-310-020-152 1¼ 46.0
19-310-020-156 1¼ 47.6
19-310-024-160 1½ 49.2
19-310-024-200 1½ 50.8
19-310-024-204 1½ 52.4
19-310-024-216 1½ 57.2
19-310-032-232 2 63.5
19-310-032-240 2 66.7
19-310-032-244 2 68.3
19-310-032-248 2 69.8
19-310-032-252 2 71.4
19-310-040-308 2½ 79.4
19-310-040-320 2½ 84.1
19-310-048-344 3 93.7
19-310-048-350 3 96.8
19-310-048-360 3 100.0
19-310-064-444 4 119.1
19-310-064-452 4 122.2
19-310-064-460 4 125.4
19-310-096-640 6 168.3
19-310-096-656 6 174.6
19-310-096-708 6 181.0
FITTINGS –CAMLOCKS SPECIALITY
116
CAMLO
CKS
HOSES
PNEUMATICS
HOSE R
EELS
RUBBER
ACC
ESSORIES &
CO
NSUMABLE
SCH
ARTS &
TABLE
S
FITTINGS –CAMLOCKSCOMPOSITE HOSE TAILS
116
CAMLO
CKS
HOSES
PNEUMATICS
HOSE R
EELS
RUBBER
Matec Smartfit Composite Camlocks – Type CFemale Camlock x Hose Tail
Size (Inches)
Material
Aluminium 316 Stainless Steel
1 20-132-C100 20-232-C100
1½ 20-132-C150 20-232-C150
2 20-132-C200 20-232-C200
2½ 20-132-C250 20-232-C250
3 20-132-C300 20-232-C300
4 20-132-C400 20-232-C400
Matec Smartfit Composite Camlocks – Type EMale Camlock x Hose Tail
Size (Inches)
Material
Aluminium 316 Stainless Steel
1 20-132-E100 20-232-E100
1½ 20-132-E150 20-232-E150
2 20-132-E200 20-232-E200
2½ 20-132-E250 20-232-E250
3 20-132-E300 20-232-E300
4 20-132-E400 20-232-E400
Powell Power Facts Matec® Smartfit® Composite Camlocks:
Specifically designed for use with compotec composite hoses. This one piece fitting system is designed to provide a quick and highly reliable connection between the hose and the fittings - insert and crimp.
Matec Smart Fit – Hose StemsMale BSPT
Size (Inches)
Material
Aluminium 316 Stainless Steel
1 20-132-TB100 20-232-TB100
1½ 20-132-TB150 20-232-TB150
2 20-132-TB200 20-232-TB200
2½ - 20-232-TB250
3 20-132-TB300 20-232-TB300*
4 20-132-TB400 20-232-TB400
* Also available in NPT. Part number 20-232-TN300
FITTINGS –CAMLOCKS SPECIALITY
117
CAMLO
CKS
HOSES
PNEUMATIC
SHOSE R
EELS
RUBBER
ACCE
SSORIES &
CO
NSUMABLE
SCH
ARTS &
TA
BLE
S
FITTINGS –CAMLOCKS COMPOSITE HOSE TAILS
117
CAMLO
CKS
Matec Smartfit VapourLock Camlock – Type VRCFemale Camlock x Hose Tail
Matec Smartfit Buttweld Hose Stem
Size (Inches)
Material
316 Stainless Steel
2 20-232-TW200
3 20-232-TW300
4 20-232-TW400
Size (Inches)
Material
Aluminium
4 20-132-VRC400
FITTINGS –CAMLOCKS SPECIALITY
118
CAMLO
CKS
HOSES
PNEUMATICS
HOSE R
EELS
RUBBER
ACC
ESSORIES &
CO
NSUMABLE
SCH
ARTS &
TABLE
S
FITTINGS –CAMLOCKSCOMPOSITE HOSE TAILS
118
CAMLO
CKS
HOSES
PNEUMATICS
HOSE R
EELS
RUBBER
Scroll Tail Composite Camlocks – Type CFemale Camlock x Hose Tail
Optima: Standard Scroll Tail WAM: Static Lock
Size (Inches)
Type & Material
Optima Aluminium
WAM Heavy Duty Aluminium Static Lock
Optima Stainless Steel
1 - 20-131-C100 20-230-C100
1¼ - 20-131-C125 20-230-C125
1½ - 20-131-C150 20-230-C150
2 20-130-C200 20-131-C200 20-230-C200
2½ 20-130-C250 20-131-C250 20-230-C250
3 20-130-C300 20-131-C300 20-230-C300
4 20-130-C400 20-131-C400 20-230-C400
For use with Ferrules & Seals. Contact your local Powell Industrial Branch for correct parts to suit your specific application.
Powell Power Facts Scroll Tails: For use with Code Hoses, Crimp Shell and Seals.
Size (Inches)
Material & Type
Aluminium Ferrule Stainless Steel Ferrule Buna Crimp Seal Viton Crimp Seal
1 - 19-002-016 19-010-016 19-011-016
1¼ - 19-002-020 19-010-020 -
1½ 19-000-024 19-002-024 19-010-024 19-011-024
2 19-000-032 19-002-032 19-010-032 19-011-032
2½ 19-000-040 19-002-040 19-010-040 19-011-040
3 19-000-048 19-002-048 19-010-048 19-011-048
4 19-000-064 19-002-064 19-010-064 19-011-064
5 19-000-080 - - -
6 19-000-096 - - -
Composite Hose Crimp Ferrules & Seals
Scroll Tail Composite Camlocks – Vapour Recovery
Size (Inches)
Type & Material
Optima Aluminium
4 20-130-VRC400
FITTINGS –CAMLOCKS SPECIALITY
119
CAMLO
CKS
HOSES
PNEUMATIC
SHOSE R
EELS
RUBBER
ACCE
SSORIES &
CO
NSUMABLE
SCH
ARTS &
TA
BLE
S
FITTINGS –CAMLOCKS COMPOSITE HOSE TAILS
119
CAMLO
CKS
Scroll Tail Composite Camlocks – Type EMale Camlock x Hose Tail
Optima: Standard Scroll Tail WAM: Static Lock
Size (Inches)
Type & Material
Optima Aluminium
WAM Heavy Duty Aluminium Static Lock
Optima Stainless Steel
1 20-130-E100 - 20-230-E100
1½ 20-130-E150 - 20-230-E150
2 20-130-E200 20-131-E200 20-230-E200
2½ 20-130-E250 - 20-230-E250
3 20-130-E300 20-131-E300 20-230-E300
4 20-130-E400 20-131-E400 20-230-E400
For use with Ferrules & Seals. Contact your local Powell Industrial Branch for correct parts to suit your specific application.
Scroll Tail Composite Camlocks – Type TBMale Thread x Hose Tail
TB = BSPT
TW = Weld On Tail
Size (Inches)
Material
Aluminium Stainless Steel Stainless Steel TW (Weld On)
1 20-131-TB100 20-230-TB100 -
1¼ 20-131-TB125 20-230-TB125 -
1½ 20-131-TB150 20-230-TB150 -
2 20-131-TB200 20-230-TB200 20-230-TW200
2½ 20-131-TB250 20-230-TB250 -
3 20-131-TB300 20-230-TB300* 20-230-TW300
4 20-131-TB400 20-230-TB400* 20-230-TW400
* Also available with an NPT thread. Part Number prefix 20-230-TNFor use with Ferrules & Seals. Contact your local Powell Industrial Branch for correct parts to suit your specific application.
Scroll Tail Composite Camlocks – Type BC (Bent C 68°)Female Camlock x Hose Tail
Optima: Standard Scroll Tail WAM: Static Lock
Size (Inches)
Type & Material
Optima Aluminium
WAM Heavy Duty Aluminium Static Lock
2 x 68° - 20-131-BC68200
2½ x 68° - 20-131-BC68250
3 x 68° 20-130-BC68300 20-131-BC68300
4 x 68° - 20-131-BC68400
NEW IMAGE REQUIRED
FITTINGS –CAMLOCKS SAFETY BUMPS
120
CAMLO
CKS
HOSES
PNEUMATICS
HOSE R
EELS
RUBBER
ACC
ESSORIES &
CO
NSUMABLE
SCH
ARTS &
TABLE
S
Camlock Safety Bumps Female Dust Cap
Size (Inches)
Colour & Industry Type
Blue Poly Industrial
2 20-800-DC200
3 20-800-DC300
4 20-800-DC400
Camlock Safety Bumps Male Dust Plug
Size (Inches) Blue Poly
Industrial
2 20-800-DP200
3 20-800-DP300
4 20-800-DP400
Camlock Safety Locks Arm locks
Size (Inches) Blue Red Orange
2 20-803-200 - -
3 - 20-803-300 -
4 - 20-803-400
FITTINGS –CAMLOCKS
SPARE PARTS
121
CAMLO
CKS
HOSES
PNEUMATIC
SHOSE R
EELS
RUBBER
ACCE
SSORIES &
CO
NSUMABLE
SCH
ARTS &
TA
BLE
S
Camlock Handles/Arms/Pins
Size (Inches)
Material & Part
Brass Handles/Arms Stainless Steel Handles/Arms Stainless Steel/Pins
3/4 20-950-075 20-955-075 20-960-075
1 20-950-100 20-955-100 20-960-100
2 20-950-200 - -
1¼ to 2½ 20-950-250 20-955-250 20-960-250
3 to 5 20-950-400 20-955-400 20-960-400
6 to 8 20-950-600 20-955-600 20-960-600
Camlock Gaskets
Size (Inches)
Material & Temperature Rating
BUNA120°C
EPDM150°C
Viton®
200°CTeflon
Encapsulated 232°CSilicone250°C
1/2 20-900-050 20-905-050 20-910-050 - -
3/4 20-900-075 20-905-075 20-910-075 20-920-075 -
1 20-900-100 20-905-100 20-910-100 20-920-100 20-940-100
1¼ 20-900-125 20-905-125 20-910-125 20-920-125 -
1½ 20-900-150 20-905-150 20-910-150 20-920-150 -
2 20-900-200 20-905-200 20-910-200 20-920-200 20-940-200
2½ 20-900-250 20-905-250 20-910-250 20-920-250 20-940-250
3 20-900-300 20-905-300 20-910-300 20-920-300 20-940-300
4 20-900-400 20-905-400 20-910-400 20-920-400 20-940-400
5 20-900-500 - - - -
6 20-900-600 - - - 20-940-600
8 20-900-800 - - - -
Size (Inches)
Material
Stainless Steel
1¼ to 2½ 20-953-250
3 to 4 20-953-400
Camlock Dust Cap Locking Arms
FITTINGS –CAMLOCKS SPARE PARTS
122
CAMLO
CKS
HOSES
PNEUMATICS
HOSE R
EELS
RUBBER
ACC
ESSORIES &
CO
NSUMABLE
SCH
ARTS &
TABLE
S
Size (mm)
Type & Material
Stainless Sttel Chain with Rings Safety Pin
Universal - 20-972-000
3mm Chain x 300 mm long 20-975-330 -
Camlock Pins & Rings with Chain