FIST -CORRECTED-27.05.2015.doc

PRESCRIBED FORMAT for PG Colleges

FIST - 2015

Application for PG Colleges at Level - 0

1. a) Name of the College & Year of Establishment Sri Venkateswara College of Engineering and Technology, Chittoor (Autonomous) & 1998

b) Name of the post-graduate Departments & Year of Commencement of PG Program

Course Name of PG DepartmentYear of

Commencement

CAD/CAM Dept. of Mechanical Engineering 2008

Machine Design Dept. of Mechanical Engineering 2014

PE&EDDept. of Electrical &Electronics Engineering

2009

EPSDept. of Electrical &Electronics Engineering

2014

VLSI DesignDept. of Electronics & Communication Engg.

2008

VLSI DesignDept. of Electronics & Communication Engg.

2012

DECSDept. of Electronics & Communication Engg.

2010

Embedded SystemsDept. of Electronics &Communication Engg.

2010

Software Engineering Dept. of Computer Science & Engg. 2011

Computer Science and Engineering-I shift

Dept. of Computer Science & Engg. 2009

Computer Science and Engineering-II shift

Dept. of Computer Science & Engg. 2012

Computer Science Dept. of Computer Science & Engg. 2012

Structural Engineering Dept. of Civil Engg. 2012

MCA Dept. of MCA 2004

MBA Dept. of MBA 2009

1

c) Address for correspondence including

Telephone, Telegram, FAX, e-mail etc.

R.V.S. Nagar, Murukumbut (P.o)

Chittoor-517 127,Andhrapradesh

Ph: 08572-246339, 245044,

0 9581 99 33 99, 0 9581 99 33 56

Fax : 08572-245211

Email: [email protected]

d) Year of Commencement of PG Program in the Department & its Financial Status (General/ Self-financed)

2009-2010 - Self Financed

2. Status of the College (attach supporting documents)

a) Academic Status [Affiliated College/ Autonomous College/ Constituent College]

Autonomous Institute

b) Financial Status [Central Govt./ State Govt./ Grant-in-Aid/ Private (self-financed)]

(Please attach copy of 2f and 12B Certificate issued by UGC)

Private (self- financed)

3. Whether the College is accredited by NAAC/ NBA or any other relevant agency. If so, please specify the Grading or Rating by those Agencies:

Name of Department

NAAC NBA

Grading or Rating

Year Grade Year

ME B Grade 2011 3 Years 2011

EEE B Grade 2011 - Applied for Renewal

ECE B Grade 2011 3 Years 2011

CSE B Grade 2011 3 Years 2011

CE ‘B’ Grade 2011 -Inspection completed

waiting for Result

2

mailto:[email protected]

4. Department-wise Number of Faculty Members with Qualifications:

Department Name of UG and PG Departments

Number of Faculty Members

Qualifications

Mechanical Engineering

B.Tech : Mechanical Engineering M.Tech (CAD/CAM) M.Tech (Machine Design)

UG -41

PG - 6

Post-graduate –39

Doctoral - 08

Electrical and Electronics Engineering (EEE)

B.Tech: Electrical Engineering EngineeringM.Tech:1.Power Electronics & Electrical Drives (PE&ED)2.Electrical Power Systems (EPS)

UG -24

PG -06

Post-graduate –28

Doctoral - 02

Electronics and Communications Engineering (ECE)

B.Tech : Electronics and Communication Engineering M.Tech :1. VLSI Design.2. Digital Electronics & Communication Systems.3. Embedded Systems

UG -33

PG - 09

Post-graduate - 38

Doctoral - 04

Department of Computer Science Engineering

B.Tech : Computer Science and Engineering

M.Tech (CSE(I and II Shift))

M.Tech (CS)

UG -25

PG – 09

Under graduate -02

Post-graduate – 30

Doctoral – 02

Civil Engineering and Structural Engineering

B.Tech :Civil Engineering

M.Tech (Structural Engineering)

UG -27

PG -3

Under graduate-06

Post-graduate –20

Doctoral – 04

Total Post-graduate –155

Doctoral –20

3

Department of Mechanical Engineering:

S.No Name of the faculty Designation Qualification Specialization

1 Dr. K.L. Narayana Prof Ph.D.Manufacturing

Engineering

2 Dr. O.V.K. Chetty Prof Ph.D.Manufacturing

Engineering

3 Dr. U. Harinath Prof Ph.D.Manufacturing

Engineering4 Dr. K. Ravindranath Prof Ph.D. Industrial Engineering

5 Prof. D. Krishna Mohan Raju Vice Principal M.Tech.Manufacturing

Engineering

6 Dr. C. Vijaya Bhaskar ReddyProfessor &

HoDPh.D.

Thermal Engineering

7 Dr. A. Mahamani Prof Ph.D.Manufacturing

Engineering

8 Dr. G. Naga Malleswara Rao Prof Ph.D.Heat Power

Engineering (R & A/c)9 Mr. A.R. Babu Assoc M.Tech (Ph.D) Thermal Engineering

10 Dr. Y. Santhosh Kumar Reddy Assoc Ph.D. CAD/CAM

11 Mr. G. Sudarsana Reddy Assoc M.Tech. Thermal Engineering

12 Mr. S. Ramarao Assoc M.Tech.Design & Production Engineering (Machine

Tools)13 Mr. R. Somraj Assoc M.E. CAD/CAM

14 Mr. R. Mariannan Assoc M.E. Thermal Engineering

15 Mr. C.S. Balasubramanyam Asst. Prof. M.Tech. Thermal Engineering

16 Mr. M. Siva Rama Krishnaiah Asst. Prof.M.Tech., (Ph.D.)

Thermal Engineering

17 Mrs. C. Uma Maheswari Asst. Prof. M.Tech. CAD/CAM

18 Mr. K. Mahesh Naidu Asst. Prof. M.Tech. CAD/CAM

19 Mr. M. Balakrishna Asst. Prof. M.Tech. Thermal Engineering

20 Mrs. B. Haritha Asst. Prof. M.Tech.Industrial

Engineering21 Mr. K. Reddi Prasad Asst. Prof. M.E. (Ph.D.) Engineering Design

22 Mr. N. Sakthivelan Asst. Prof. M.E.Manufacturing

Engineering

23 Mr. M. Muthuvel Asst. Prof. M.E.Manufacturing

Engineering24 Ms. A. Jayasree Asst. Prof. M.Tech. CAD/CAM

25 Mr. P. Sreenivasulu Asst. Prof. M.Tech. CAD/CAM

26 Ms. K. Mounika Asst. Prof. M.Tech. CAD/CAM

27 Mr. M.A. Chakravarthy Asst. Prof. M.Tech Industrial

4

Engineering

28 Mr. S. Ramesh Babu Asst. Prof. M.TechIndustrial

Engineering

29 Mr. S.Md. Khadeer Ahamed Asst. Prof. M.TechIndustrial

Engineering30 Mr. D. Mallikarjun Rao Asst. Prof. M.Tech Thermal Engineering

31 Mr. N. Haranath Asst. Prof. M.Tech Thermal Engineering

32 Mr. A. Rukesh Reddy Asst. Prof. M.Tech CAD/CAM

33 Mr. R. Syam Sudhakar Rao Asst. Prof. M.Tech Machine Design

34 Mr. R. Rajesh Asst. Prof. M.Tech Machine Design

35 Mr. R. Suresh Asst. Prof. M.Tech Machine Design

36 Mr. P.Mohammad muneer Asst. Prof. M.Tech CAD/CAM

37 Ms. S.Preethi Asst. Prof. M.Tech CAD/CAM

38 Mr. R.Prasanna srinivas Asst. Prof. M.Tech CAD/CAM

39 Mr. S.Anburose Asst. Prof. M.Tech CAD/CAM

40 Mr. R.Rama gopal reddy Asst. Prof. M.Tech CAD/CAM

41 Mr. E.Lokesh kumar Asst. Prof. M.Tech CAD/CAM

42 Mr. H.Sumitra Asst. Prof. M.Tech CAD/CAM

43 Ms. P.Harish Asst. Prof. M.Tech CAD/CAM

44 Mr. D.Venkatakrishna Asst. Prof. M.Tech Thermal Engineering

45 Mr. R. Raghunadha reddy Asst. Prof. M.Tech Engineering Design

46 Ms. Rekha kiranmai Asst. Prof. M.Tech CAD/CAM

47 Mr.K.V.L.Narasimhababu Asst. Prof. M.Tech CAD/CAM

Department of Electrical and Electronics Engineering (EEE):


1 Dr.M.Muralidhar Principal Ph.D.High Voltage Engineering

2 Prof. K.Eswaramma Prof. & Head M.Tech. Power Electronics

3 Mr.K.R.Vadivelu Professor M.Tech, (Ph.D.) Power Systems

4 Mr.Y.N.Vijaya Kumar Assoc. Professor M.Tech, (Ph.D.) Power Electronics

5 Mr.S.Senthil Assoc. ProfessorM.E, MBA,

(Ph.D.)Power Electronics

6 Mr. G. Balasundaram Assoc. Professor M.E, (Ph.D.) Power Systems

7 Mr. H.Balamurgan Assoc. Professor M.E, MBA Applied Electronics

8 Mr.C.B.Saravanan Assoc. Professor M.Tech. Power Systems

9 Mr. K.Lokanadham Assoc. Professor M.Tech. Power Systems

5

10 Mr.P.R.Murali Mohan Assoc. Professor M.Tech. Energy Systems

11 Dr.M.Vishnu Vardhan Assoc. Professor M.Tech, Ph.D. Power Electronics

12 Mr.G.Venkat Pradeep Asst. Professor M.Tech.High Voltage Engineering

13 Mr. K.Janardhan Asst. Professor M.Tech. Electrical Power Engineering

14 Mr.S.Vijaya Bhaskar Asst. Professor M.Tech. Space Technology

15 Ms.K.Dharanisree Asst. Professor M.Tech. Power Systems

16 Mr.C.Sreehari babu Asst. Professor M.Tech. Electrical Power Engineering

17 Ms.C.L.Sravanthi Asst. Professor M.Tech. Electrical Power Engineering

18 Ms.K.Bhavani Asst. Professor M.Tech. Power Electronics & Electrical Drives

19 Mr. K.Ramaraju Asst. Professor M.Tech. Power Electronics & Electrical Drives

20Mr.Showkath Ali Sayeed

Asst. Professor M.Tech. Power Electronics & Electrical Drives

21 Mr.B.Kiran Asst. Professor M.Tech. Power Electronics & Electrical Drives

22Mr.B.Madhusudana Reddy

Asst. Professor M.Tech, (Ph.D.) Power Electronics & Industrial Drives

23 Mr.C.P.Sai Kiran Asst. Professor M.Tech. Power Electronics & Electrical Drives

24 Mr.K.Shafi Asst. Professor M.Tech. Power Electronics & Electrical Drives

25 Mr.C.Dinakaran Asst. Professor M.Tech. Power Electronics & Electrical Drives

26 Mr.G.Chandrakala Asst. Professor M.Tech. Power Electronics & Electrical Drives

27 Mr.M.Subramanyam Asst. Professor M.Tech. Power Electronics & Electrical Drives

28 Mr.G.Devanatha Reddy Asst. Professor M.Tech. Power Electronics & Electrical Drives

29 Mr.J.Gowri Sankar Asst. Professor M.Tech. Power Electronics

30 Mr.C.Vinay Sagar Asst. Professor M.Tech. Control Systems

Electronics and Communications Engineering (ECE):

6


1 Dr. M.Sudhakara Reddy Professor M.E., Ph.D Digital Signal Processing

2 Prof.A.S.N.Murthy Professor M.E. Control Systems

3Dr.G.Suryanarayana Reddy

ProfessorPh.D. Solid state Physics

4 Dr.C. Chandra Sekar Professor M.Tech, Ph.D Digital Image Processing

5 Dr. M.A. Raja Professor M.E.,Ph.D. Digital Signal Processing

6Mr.Y. Murali Mohan Babu

ProfessorM.Tech, (Ph.D) Microwave & Radar

Engineering

7 Mr. K. Lokesh Krishna Assoc.Prof. M.E., (Ph.D) Microelectronics

8 Mr. S. Murali Mohan Assoc.Prof. M.Tech (Ph.D) Digital Image Processing

9Mr. V. Jayachandra Naidu

Assoc.Prof.M.Tech Digital Signal Processing

10 Ms. M.Sharmila Assoc.Prof. M.Tech VLSI

11 Mr. S.Nagaraj Assoc.Prof. M.Tech VLSI

12 Ms. M.Chithra Assoc.Prof. M.Tech VLSI

13 Mr. B.Shoban Babu Assoc.Prof. M.Tech Digital Image Processing

14 Ms. D. Devisasikala Assoc.Prof. M.Tech Digital Signal Processing

15 Mr. J. Madhan Kumar Asst.Prof M.Tech Applied Electronics

16Mr. M. Krishna Chaitanya

Asst.ProfM.Tech VLSI

17Mr. K. Venkataramana Reddy

Asst.ProfM.Tech VLSI

18 Mr. P. Prathap Asst.Prof M.Tech Digital Communications

19 Mr. S. Manesseh Asst.Prof M.Tech Digital Signal Processing

20 Mr. Mohammad Sadiq Ali Asst.Prof M.Tech Digital Communications

21 Ms. M. Ameena Begum Asst.Prof M.Tech Digital Communications

7

22 Ms. P. Uma Devi Asst.Prof M.Tech VLSI

23 Ms. A. Yasoda Asst.Prof M.Tech Digital Signal Processing

24 Mr. L.Narayana Rao Asst.Prof M.Tech Digital Signal Processing

25Mr. T. Jaya Prakash Reddy

Asst.ProfM.Tech Digital Signal Processing

26 Mr. S.Shajahan Asst.Prof M.Tech Digital Signal Processing

27 Mr. Kaustubh Kumar Shukla

Asst.Prof M.E VLSI Design

28 Mr. A. Balaji Asst.Prof B.Tech VLSI

29 Ms. C. Chandrakala Asst.Prof M.Tech Digital Communications

30 Ms. K. Vishnu Chaitnya Asst.Prof M.Tech Digital Communications

31 Ms. C. H. Madhu Priya Asst.Prof B.Tech VLSI

32 Ms. N. Srinivasulu Asst.Prof M.Tech VLSI

33 Ms. K. Yamuna Asst.Prof M.Tech VLSI

34 Ms. R.Deepika Chand Asst.Prof B.Tech VLSI

35 Ms. K S Revathi Asst.Prof M.Tech Digital Signal Processing

36 Ms. B. Silpa Asst.Prof M.Tech VLSI

37 Mr. G. Durga Prakash Asst.Prof M.Tech DE&CS

38 Mr. G. Prathap Reddy Asst.Prof M.Tech VLSI

39 Ms. K J Hymavathi Asst.Prof M.Tech Embedded System

40 Mr. P. Subramanyam Asst.Prof M.Tech Embedded System

41 Ms. G Omkareswari Asst.Prof M.Tech VLSI

42 Mr. N. Vinodh Kumar Asst.Prof M.Tech DE&CS

43 Mr B. Rajasekhar Asst.Prof M.Tech DE&CS

44 K.Sudheer Babu Asst.Prof M.Tech DE&CS

Department of Computer Science and Engineering:

8

S.No. Name Designation Qualification Specialization

1 Dr J Janet Professor Ph.D.Computer Science and

Engineering

2 Dr Shaik Naseera Professor & Head Ph.D.Computer Science and

Engineering

3 Mr. K Thyagarajan Associate Professor M.Tech.Computer Science and

Engineering

4 Mrs. P Jyotheeswari Associate Professor M.Tech.Computer Science and

Engineering

5 Mr. S Vasu Associate Professor M.Tech.Computer Science and

Engineering

6Mr. T. Sunil Kumar Reddy

Associate Professor M.TechComputer Science and

Engineering

7 Mr. B Kanakadurga Associate Professor M.TechComputer Science and

Engineering

8 Mr. J Velmurugan Associate Professor M.TechComputer Science and

Engineering

9 Mr. A Subash Assistant Professor M.TechComputer Science and

Engineering

10 Ms. AM Vedhagrani Assistant Professor M.TechComputer Science and

Engineering

11 Mr. B Palguna Kumar Assistant Professor M.TechComputer Science and

Engineering

12 Mr. B Theja Assistant Professor B.TechComputer Science and

Engineering

13 Mr. G DilliBabu Assistant Professor M.TechComputer Science and

Engineering

14 Ms. G Sangeetha Assistant Professor M.TechComputer Science and

Engineering

15 Mr. G.Gurumurthy Assistant Professor M.TechComputer Science and

Engineering

16Mr. K Dasaradharami Reddy

Assistant Professor M.TechComputer Science and

Engineering

17 Mr. K Pavan Kumar Assistant Professor M.TechComputer Science and

Engineering

18 Mr. K Vinod Kumar Assistant Professor M.TechComputer Science and

Engineering

19 Ms. M Revathi Assistant Professor M.TechComputer Science and

Engineering

20 Mr. M Jagdeesh Babu Assistant Professor M.TechComputer Science and

Engineering

21 Mr. N Sarvanan Assistant Professor B.E.Computer Science and

Engineering

22 Mr. R Kumaran Assistant Professor M.E.Computer Science and

Engineering

23 Mr. K.Ravi Assistant Professor M.E.Computer Science and

Engineering

9

24 Mr. Ravi Kumar Poluru Assistant Professor M.TechComputer Science and

Engineering

25 Ms. S Laasiya Priya Assistant Professor B.TechComputer Science and

Engineering

26 Mr. S Suresh Kumar Assistant Professor M.E.Computer Science and

Engineering

27 Ms. S Hima Bindu Assistant Professor M.TechComputer Science and

Engineering

28 Mr. Bhanu Prakash Ande Assistant Professor M.TechComputer Science and

Engineering

29 Mr. G Sateesh Assistant Professor M.TechComputer Science and

Engineering

30 Mr. K Ramesh Assistant Professor M.TechComputer Science and

Engineering

31 Mr. N Vikram Assistant Professor M.TechComputer Science and

Engineering

32 Mr. M Mahesh Kumar Assistant Professor M.TechComputer Science and

Engineering

33 Mr. Penumuru Nihar Assistant Professor M.TechComputer Science and

Engineering

34 Mr. S Mohan Raju Assistant Professor M.TechComputer Science and

Engineering

Civil Engineering / Structural Engineering:


1 Dr.B.Kotaiah Professor &Dean Ph.D.Environmental Engg.

2 Dr.A.V.Narasimha Rao Professor &Dean Ph.D.Geotechnical Engg.

3 Prof. M.Mohan Babu Professor

M.Tech.,(P.h.D)(Submitted

Thesis)Water Resources Engineering

4 Dr.S.Venkateswara Rao Professor Ph.D.Engineering Geology

5 Dr.B.Damodhara Reddy Associate Professor Ph.D. Structural Engg.

6 Mr.U.Vamsi Mohan Associate Professor M.Tech.(Ph.D) Structural Engg.

7 Mr. B.Raja Sekhar Associate Professor M.Tech.(Ph.D) Structural Engg.

8 Mr. Th.Jagat Singh Associate Professor M.Tech. Structural Engg.

9 Mr.N.Cheeralaiah Assistant Professor M.Tech.Water Resources Engineering

10 Mr.A.Venkataramana Assistant Professor M.Tech.Environmental Engg.

11 Mr.K.P.Bhargav Kumar Assistant Professor M.Tech. Geotechnical

10

Engg.

12Mr.C.Nagendra Venkata Sai

Assistant Professor M.Tech. Structural Engg.

13 Mr.Mr.O.Gajendra Prasad Assistant Professor M.Tech.Geotechnical Engg.

14 Mr.N.Kiran Kumar Assistant Professor M.Tech. Structural Engg.

15 Mr.P.Narashima Rao Assistant Professor M.Tech. Structural Engg.

16 Mr.K.Lokesh Assistant Professor M.Tech. Structural Engg.

17Mr.S.Praveen Kumar Reddy

Assistant Professor M.Tech. Structural Engg.

18 Mr.G.Vinod Kumar Balaji Assistant Professor M.Tech. Structural Engg.

19 Mr.U.Anil Kumar Assistant Professor M.Tech. Structural Engg.

20 Ms.K.Aruna Kumari Assistant Professor M.Tech.Geotechnical Engg.

21 Ms.K.Venkata Lavanya Assistant Professor B.Tech. Civil Engineering

22 Mr.Y.Guru Prasad Assistant Professor M.Tech.Geotechnical Engg.

23 Ms.V.R.Sai Devayani Assistant Professor M.Tech.Geotechnical Engg.

24 Ms.R.Harshitha Assistant Professor B.Tech. Civil Engineering

25 Ms.K.N.Ruknimi Florence Assistant Professor M.Tech.Water Resources Engg.

26 Mr.C. Anil Kumar Reddy Assistant Professor B.Tech.Environmental Engg.

27 Ms.D.S.Sudheera Assistant Professor B.Tech.Environmental Engg.

28 Ms.K.Sri lakshmi Assistant Professor M.Tech.Geotechnical Engg.

29 Mr. C. Surya prakash Assistant Professor M.Tech. Structural Engg.

30 Ms. M. Harika Assistant Professor M.Tech.Water Resources Engg.

5. Department-wise Number of Students during last three years admitted and passed:

DepartmentName of PGDepartment

Admitted Passed2012 2013 2014 2012 2013 2014

Mechanical EngineeringM.Tech (CAD/CAM)

20 10 0319

In II Year In I Year

Mechanical EngineeringM.Tech (Machine Design)

- - 07 - - In I Year

EEE M.Tech (PE& ED) 19 10 7 13 In II Year In I Year

EEE M.Tech (Electrical - - 11 - - In I Year

11

Power Systems)

ECEM.Tech: VLSI Design

13 14 20 13 14 20

ECE

M.Tech: Digital Electronics & Communication Systems.

14 13 14 14 11 14

ECEM.Tech: Embedded Systems

16 18 18 15 17 18

CSEM.Tech (CSE-I Shift)

16 13 8 14 10 14

CSEM.Tech (CSE-II Shift)

14 10 0 - - 12

CSE M.Tech (CS) 12 4 3 - - 08

CE M.Tech (Structural Engineering)

13 12 15 12 In II Year In I Year

6. Department-wise percentage Cut-off Marks of students admitted during last three years:

Name of PG

Department

%-Cut-off Marks in UG Level Admission

%-Cut-off Marks in PG Level Admission

2012 2013 2014 2012 2013 2014

M.Tech (CAD/CAM) 50 % 50% 50% 59% 57% 50%

M.Tech (Machine Design) - - 50% - - 50%

M.Tech (PE&ED) 50 % 50% 50% 59% 57% 50%

M.Tech (Electrical Power Systems) - - 50% - - 50%

M.Tech: VLSI Design 50% 50% 50% 57% 58% 56%


50% 50% 50% 54% 53% 62%

M.Tech: Embedded Systems 50% 50% 50% 65% 64% 61%

M.Tech (CSE-I Shift) 50% 50% 55% 57% 55% 56%

M.Tech (CSE-II Shift) 50% 50% 50% 50% 50% 50%

12

M.Tech (CS) 50% 50% 50% 50% 50% 50%

M.Tech (Structural Engineering)50 % 50% 50% 60% 60% 60%

7. University Rank of Students at UG and PG Level University Examinations:

UG and PG Programs University Ranks during last 3 years

2012 2013 2014

M.Tech (CAD/CAM) Nil Nil Nil

M.Tech (Machine Design) - - -

M.Tech (PE&ED) Nil Nil Nil

M.Tech (Electrical Power Systems) - - -

B.Tech : Electronics and Communication Engineering Nil Nil Nil

M.Tech: VLSI Design Nil Nil Nil

M.Tech: Digital Electronics & Communication Systems. Nil Nil Nil

M.Tech: Embedded Systems Nil Nil Nil

B.Tech ( Computer Science and Engineering) Nil Nil Nil

M.Tech (CSE) Nil Nil Nil

M.Tech (Structural Engineering) Nil Nil Nil

Total Nil Nil Nil

8. Number of Students qualified NET/GATE/INSPIRE or any other qualifying examination during last 3 years.

PG Programs

No. of Students qualify NET/GATE/INSPIRE/PGECT etc. during last 3 years

2012 2013 2014

13

CAD/CAM7 7 3

Machine DesignNil Nil 6

PE&ED 13 10 07

EPS - - 11

M.Tech: VLSI Design 13 10 10


10 7 4

M.Tech: Embedded Systems 11 10 8

M.Tech (CSE-I Shift) 9 10 8

M.Tech (CSE-II Shift) 10 10 0

M.Tech (CS) 10 4 3

M.Tech (Structural Engineering)

7 7 3

Total 90 75 63

9. Name of the Departments supported already in the College under FIST Program:

Nil

10. Indicate the development grant received from UGC/AICTE during the Ninth and Tenth Plan.

S.No. Description of EquipmentCost

(Rs.)

Name of

Agency/SchemeYear

1

Research Promotion Scheme (RPS) (Ref.No.8023/RID/RPS-9696/2011-12)(i) Chemical Fume Hood(ii) Hydraulic Press(iii) Desktop Computer(iv) Lock in Amplifier with LABVIEW

5,50,000 AICTE 2011-12

14

2Dr.G.Surya Narayana Reddy High – Tc Superconductivity and its applications

5,50,000Research Promotion

Scheme (RPS), AICTE

2011-13

11. Has the Department received any major infrastructure research grant during the last five years from S&T agencies including UGC/AICTE? If yes, details.

S.No. Description of EquipmentCost (Rs.)

Name of Agency/Scheme

Year

1 CNC Milling machine 13,80,000 AICTE/MODROBS2012-

2013

2TIG Welding & Plasma Welding

Machines8,00,000 AICTE/MODROBS

2011-

2012

3Computer Based VCR Diesel

Engine 11,10,000 AICTE/MODROBS2008-

20094 Computer Base A/C Test

5Thermal Conductivity of given

metal rod

2,24,000AICTE/

MODOROBS

2007-

2008

6 Critical Heat Flux Apparatus

7Study and Heat pipe and its

demonstration

8Heat Transfer in Drop & Film wise

condensation

9Heat transfer through concentric

Spheres

10Experiment on Transient Heat

conduction

11 Study of Two phase flow

12 MATLAB (10 users Node Lock) 7.25 AICTE/MODROBS 2009-

201013

MULTISIM -10 (10 users Node

Lock)

14 Central Sales Tax

15 HP COMPACS DX 2480 Desk 15

Top

16 SONY VPL EX 5 LCD Projector

17 10 KVA UPS DELTA MAKE

18 Load test on dc shunt generator

8.00AICTE/

MODROBS

2011-

2012

19 Dynamic load test on dc series

motor

20 Fields test on dc series machines

21 Dynamic load test on dc

compound motor

22 Dynamic load test on dc shunt

motor

23 Scoot connection of two single

phase transformers.

24 V and inverted v curves of a three

phase synchronous motor

25 Regulation of three phase

alternator by ZPF and ASA

methods

26 Dynamic load test on three phase

induction motor.

27 Analysis of performance

characteristics of synchronous

motor

28 Analysis of slip characteristics of

an induction motor.

29 Analysis of speed characteristics of

stepper and servo motor

30 Electrical items

31 Experimental tables with steel

frame & wood finishing

32 Advanced Digital Signal

Processing and Application lab

AICTE/MODROBS 2007-08

16

(8024/RID/BOR/MOD/087/9/10)

MATLAB-Academic Version

(i) Statistics Tool Box

(ii) Control System Tool

Box

(iii) Signal Processing Tool

Box

(iv) Filter Design Tool Box

(v) SIMULINK

(vi) Signal Processing

Block Set

DSP Starter kit(DSK)

1500000

33

Advanced Communication Lab (Ref. No:12 / AICTE / RIFD / MOD (policy-4) Pvt-96/2012-13)

(i) Erbium Doped Fiber Amplifier Module

(ii) DWDM & BRAGG Grating Module

(iii) Advanced Microstrip Component Training System

(iv) 1.3GHz Vector Network Analyzer

(v) System Bus and Protocol Analyzer System

(vi) Microstrip and Antenna Trainer System

17,80,000AICTE/

MODOROBS

2012-

2013

12. Details of research grant received from different agencies during the last five years:

Name of the Investigator

Title of the project and duration

Amount sanctioned

Funding Agency

Ms. C. Uma MaheswariModeling and analysis of solar desalination unit- 3 years (2012-2015)

Rs.20,20,000

Women Scientist scheme(WOS-A),

Department of Science and Technology

17

Prof .D.Krishna Mohan

RajuDesign and Developmentof efficient cooking stove

Rs.1,00,000UGC-Minor Research

Project

Dr.A.Mahamani Grindability studies on AA6061-TiB2 /ZrB2

Rs.27,25,000DST-SERB-Fast Track

Prof.K.EswarammaModernization of Simulation of Electrical Systems Lab (2009-2010)

Rs. 7,25,000 AICTE

Prof.K.EswarammaSeminar Grant on DSP Controlled Power Electronics Systems and Applications

Rs.1,50,000 AICTE

Prof.K.Eswaramma Modernization of Electrical Machines (2011-2012)

Rs. 8,00,000 AICTE

Ms.Dharani Sree

Enhancement of Real-Time Power Analysis and Control for Distributed Generation Interface using FPGA3 years

Rs.23,00,000 Women Scientist scheme (WOS-A), Department of Science and Technology

Mr.C.B.SaravananSeminar Grant on Advances in Power and Energy Systems (2015)

Rs.1,00,000 DST – SERB

Dr J.Janet Optimizing Data Movement in Cloud

Rs.22,70,000DST-Young Scientist Fast Track Engineering Scheme

Ms. P.Jyotheeswari

Enabling Geographically Distributed Cloud Applications- 3 years (2013-2016)

Rs.23,69,000

Women Scientist scheme(WOS-A), Department of Science and Technology

13. Indicate the research activities of the faculty members as per the following pro-forma

Name and Designation of Faculty

Major areas of ResearchNumber of

Ph. Ds produced (in last 5 years)

Dr. O. Venkata Krishnaiah Chetty,Production Technology,

Industrial Engineering and Management 12

Dr. K.L. Narayana, Production Technology 0218

Dr. U. Harinath, Production Technology ---

Dr.C. Vijya Baskar Reddy Thermal Engineering ---

Dr. A. Mahamani Manufacturing Technology 02 (Pursuing)

Dr. G. Naga Malleswara Rao Thermal engineering ---

Dr.Y.Santhosh Kumar Reddy Industrial Engineering ---

Dr.K.Ravindranath Industrial Engineering ---

Dr.M.MuralidharH.V Engineering and Instrumentation &

Control

1) Awarded 02

2) In progress 04

Dr.M.Vishnu Vardhan

Power System Stability and Control, Applications of power electronics in power systems, Applications of Soft Computing Techniques in Power distribution Systems, Utilizations of Renewable Energy Sources in Electrical Power Generation System

---

Mr.K.R.VadiveluPower System Optimization, Optimal Reactive

Power Planning in Power Systems---

Mr.Y.N.Vijaya Kumar Power system stability and FACTS

controllers---

Mr.S.SenthilPower Electronic control of AC and DC

Drives using Intelligence Techniques,

Non-conventional Energy sources

---

Mr.G.BalasundaramEnergy conservation and management

Power Electronics applications in

Renewable Sources

---

Mr.B.Madhusudana Reddy

Power Electronics and Industrial Drives,Multi-

Level Inverters, Power Electronic Control of AC

Drives

---

Dr. M.Sudhakara Reddy Digital Signal Processing ---

Dr. G. Surya Narayana Reddy,High – Tc Superconductivity and its applications ---

Dr. J.JanetKnowledge Based Systems, Medical Image Processing, Cloud Computing 04

19

Dr Shaik Naseera Grid Computing -

Dr. B. Kotaiah Environmental Engineering 01

Dr. A.V.Narasimha Rao Geotechnical Engineering 05

14. a) List of Research Publications in SCI Journals coming from the Department during the last five years (Authors Names, Title of Paper, Name of the Journal, Volume, Page nos., Year).

S.No. Name of Faculty Title of the paperTitle of the paper Journal Volume Page Year

1 Dr.O.V.K.Chetty A Two-Phase Metaheuristic approach for solving economic lot scheduling problems

International Journal of Operations Research

Vol 4(3):

pp. 296-322

2009

2 Dr.O.V.K.ChettySustainable Production Management – A case study of a Mauritius Company’

RVIM Journal of Management Research

Vol.2(1):

pp. 40-48

2010

3 D. Krishna Mohan Raju“A conceptual design of collapsible wind friction reduction attachments to truck for better fuel economy ”

International Journal of Engineering Research and Technology (IJERT)

Vol.5, No. 03,

pp.251-259.

2012

4 D. Krishna Mohan Raju“A conceptual design of collapsible wind friction reduction attachments to bike for better fuel economy”

International Journal of Multidisciplinary Research and Advances in Engineering (IJMRAE)

Vol.4, No. III

pp.239-252.

2012

5 D. Krishna Mohan Raju

“A conceptual design of wind friction reduction attachments to the rear portion of a car for better fuel economy at high speeds”

International Journal of Engineering Science and Technology (IJEST)

Vol.4, No. 05

pp.2367-2373

2012

6 D. Krishna Mohan Raju”A conceptual design of collapsible wind friction reduction attachments to bus for better fuel economy”

International Journal of Advanced Mechanical Engineering

Vo 2, NO. 1

Pp.25-34. 2012

7.Dr .C. Vijaya Baskar Reddy

Piezoresistive SU-8 Cantilever With Fe(III) Porphyrin Coating for CO Sensing

IEEE Transactions on Nanotechnology

VOL. 11, NO. 4,

Pp 701-706

2012


Static Analysis Of Tractor Trolley Axle

Journal of Engineering Trends and Technology(IJETT),

Volume 4 Issue 9,

pp-4183-4187

2013


Modeling and Analysis of Two Wheeler Connecting Rod by Using Ansys,

IOSR Journal of Mechanical and Civil Engineering

Volume 6, Issue 5

PP 83 -87 2013


Modeling and Analysis of Tractor Trolley Axle Using Ansys,

IOSR Journal of Mechanical and Civil Engineering

Volume 6, Issue 5

Pp 88-92

2013

11 Dr.A.Mahamani

Development of spread sheet based vendor managed inventory model for a single echelon supply chain-a case study,

Serbian Journal of Management –An International Journal of Management Theory and Practice

5 (2)

Pp 199-211.

2010

20

12 Dr.A.Mahamani

Investigations of flank wear, cutting force and surface roughness in the machining of Al-6061–TiB2 in-situ metal matrix composites produced by flex-assisted synthesis”

International Journal of Advanced Manufacturing Technology,

Volume 55, No1-4,

pp 65-73.

2010

13 Dr.A.Mahamani

Multi-response optimization of turning parameters of Al-6061–TiB2

in-situ metal matrix composite using Grey-Taguchi method

International e Journal of Mathematics and Engineering,

Vol 1, No. 1I,

pp 246 – 255

2010

14 Dr.A.Mahamani

Optimization of turning parameters of in-situ metal matrix composite for surface roughness using Taguchi method,

Journal of Manufacturing Engineering,

Vol.6, No 1,

pp5-92010

15 Dr.A.Mahamani

Determination of Optimum Parameters for Multi-Performance Characteristic in Turning of Al 6061-6% ZrB2 In-situ Metal Matrix Composite by Using Grey Relational Analysis,

International Journal of Manufacturing, Materials and Mechanical Engineering,

2(1) 11-29 2011

16 Dr.A.MahamaniMachinability Study of Al-5Cu-TiB2 In-situ Metal Matrix Composites Fabricated by Flux-assisted Synthesis,

Journal of Minerals &Materials Characterization & Engineering,

Vol .10,No.13

pp.1243-1254

2011

17 Dr.A.Mahamani

Synthesis, Quantitative Elemental Analysis, Microstructure Characteristics and Micro Hardness Analysis of AA2219 Aluminum Alloy Matrix Composite Reinforced by In-Situ TiB2 and Sub-Micron ZrB2 Particles

http://ieeexplore.ieee.org

pp 50 - 53

2010

18 Dr.A.MahamaniFabrication and characterization of in-situ Al-TiC Composite,

International Journal of Mechanical Engineering and Technology,

Volume 4, Issue 1,

pp. 109-114

2013

19 Dr.A.MahamaniExperimental Investigation on Drilling of AA2219-TiB2/ZrB2 In-situ Metal Matrix Composites,

Accepted in Procidia Material science, 2014(Science Direct)

2014

20 Dr.A.Mahamani

Influence of Process Parameters on Cutting Force and Surface Roughness During Turning of AA2219-TiB2/ZrB2 In-situ Metal Matrix Composites


2014

21 Dr.A.Mahamani

Investigation of cutting force, surface roughness and flank wear in turning of In-situ Al6061-TiC metal matrix composite


2014

22 Dr.A.Mahamani

Influence of electrical discharge machining parameters on surface roughness in machining of Al 6061-TiB2/ZrB2 in-situ metal matrix composite

accepted in Applied Mechanics and Materials

23 Dr.A.MahamaniDevelopment of AHP model for selecting higher education in abroad,

The observer of management education journal,

Volume 4, issue 4,

pp 89-91

2009

21

24 Dr.A.Mahamani

Synthesis and Characterization of Al 6061 -5 % Cu Composite Reinforced with In-Situ TiB2 and ZrB2 Particles,

Indian foundry journal,

Vol. 56, No.7,

pp 23-30

2010

25 Dr.A.MahamaniMechanism of in-situ reinforcement formation in fabrication of AA6061-TiB2 metal matrix composite, \

Indian foundry journal,

Vol. 57, No. 3,

Pp 27-30

2011

26 S.RamaRaoFuzzy logic-based forward modeling of Electro Chemical Machining process

ieeexplore.ieee.org2009

27 S.RamaRaoEffect of process variables on metal removal rate in electrochemical machining of Al-B4C composites.

Archives of Applied Science Research.

Vol.4 Issue 4,

Pp 1844-1849

2012

28 S.RamaRaoFabrication and mechanical properties of aluminum boron carbide composites,

International Journal of Materials and Biomaterials Applications,

2(3)Pp 15-18

2012

29 S.RamaRaoOptimization of Machining Parameters in ECM of Al/B4C Composites,

Journal for Manufacturing Science and Production,

Volume 13, Issue 3,

Pages 145–153

2012

30 S.RamaRao

Modeling of Radial Over Cut in Electrochemical Machining of Al-B4C MMC Using Response Surface Methodology

, Journal for Manufacturing Science & Production.

Volume 13, Issue 1-2,

Pages 31–36.

2012

31 S.RamaRaoMulti-response optimization of electrochemical machining of Al-Si/B4C composites using RSM

International Journal of Manufacturing, Materials, and Mechanical Engineering

3 (3)PP. 42 – 56.

2013

32 S.RamaRao

Multiresponse Optimization of Electrochemical Machining of Al-B4C Composites Using Grey Relational Analysis,

IUP Journal of Mechanical Engineering .

Vol. 5 Issue 2,.

p58-67

2012

33Dr.G.Naga Malleswara Rao

Influencing parameters on performance of a mantle heat exchanger for a solar water heater- a simulation study

International Journal of Engineering, Science and Technology (IJEST)

Vol 2, No. 2,

pp. 155-164

2010,.


Simulation of performance of a mantle heat exchanger – influence of preheating and mantle fluid entry

International Journal of Multidisciplinary Research and Advances in Engineering (IJMRAE)

Vol.2, No.II.

pp:53-62

2010


Simulation of Energy Storage Tank with Mantle Heat Exchanger: Influence of Preheating and Mantle Fluid Entry on Heat Transfer

Journal of The Institute of Engineers (India), Kolkata

Volume 92

Pp14-

212011


Effect of operating parameters on Thermal Stratification in Sensible

International Journal of Advances in

Volume 1,

Pp24-

32

2010.

22

Heat Storage Systems-A Simulation Study

Science and Technology.

Number 5,


An Experimental investigation of Effect of Mantle Inlet Position on Satisfaction in a Solar Domestic Hot Water System

Journal of Solar Energy Society of India, New Delhi.

Vol-2.Pp11-

172010


A comprehensive study of experimental investigation of an internal combustion engine using alcohol as fuel

International Journal of Multidisciplinary Research and Advances in Engineering

Vol.4 no.3

Pp

353-

365

2012


Design Optimization and Analysis of a Connecting Rod using ANSYS.

International Journal of Science and Research (IJSR)

ISSN:2319-7064, Volume 2, issue 7

pp:22

5-2292013


Analysis Of Thermal Stresses In Heat Exchanger To Find Optimum Wall Thickness Through ANSYS

International Journal of Innovative Research in Science, Engineering and Technology(IJIRSET)

ISSN: 2319-8753

Vol. 2, Issue 8

pp:

3908-

3913

2013


Enhancement of air swirl in a Diesel engine with grooved Cylinder head

International Journal of Innovative Research in Science, Engineering and Technology (IJIRSET)

ISSN: 2319-8753 Vol. 2, Issue 8,

pp:

3821-

3526

2013


Importance and Role of Additives for Estimating Performance and Emissions in CI Engines Using Alcohol as Fuels- A Study.

International Journal of Innovative Research in Science, Engineering and Technology(IJIRSET),

ISSN: 2319-8753

Vol. 2, Issue 8

pp: 3827-3836 2013


Design and Fabrication of Eccentric Turning attachment.

International Journal of Application or Innovation in Engineering & Management (IJAIEM).

ISSN 2319-4847, Volume 2, issue 8.

Pp35-

412013

44 Dr.G.Naga Malleswara Rao

A computer programmed design Optimization and analysis of Compressor impeller. (paper ID: 2120142)

International Journal of Research in Advent Technology (IJRAT),

E-ISSN: 2321–9637, Volume 2,

Pp78-

83

2014

23

Issue 1


Design Optimization of Centrifugal Compressor Impeller for Large Refrigeration and Air-Conditioning Applications (Paper code: 03-2752)

Indian Journal of Mechanical Engineering Research (IJMER).

Volume 1, Number 2

pp.

199-

208

2013


Effects of Various Parameters on CNMG Turning Insert in Machining Ti-6Al-4V Alloy

IJETI International Journal of Engineering & Technology Innovations, www.IJETI.com

Vol. 1 Issue 2, ISSN (Online): 2348-0866,

Pp65-

722014


Machining of ti6al4v alloy using novel bondless Diamond layered grinding wheel for

Precision grinding

International Journal of Mechanical And Production Engineering,

ISSN: 2320-2092, Volume- 2, Issue-11.

Pp13-20

2014

48Dr.Y.Santhoshkumar Reddy

Stochastic redundancy allocation problem using simulation

Journal of Engineering and Technology Research,

Vol.3(10)

pp. 287 - 291

2011


Simplifying the Solution of Stochastic Redundancy Allocation Problems Using Stochastic Dynamic Programming Technique,

International Journal of Industrial and Production Engineering & Technology (IJIPET),

Volume 1 Number 2 (2011),

pp.81-95

2011


Maximum reliability path in bridge network-Monto carlo simulation ,

International journal of emerging trends in engineering and developments,.

Volume 3, issue 1

pp 337-341

2011

51C.Umamaheswari

Thermal Analysis of Thermal Energy Storage System with Phase Change Material”,

International Journal of Engineering Research and Applications.

Vol. 3, Issue 4,

pp.617-622

2013

52K.Mahesh naidu

ANN based prediction of surface roughness in turning of AA 6351”

International Journal of Engineering Research and Applications

Vol. 3, No. 4,

Pp. 1455-1459, 2013

53M.Siva Rama Krishnaiah

“Determination of power of high pressure steam turbine blading using cfd analysis”.

National Journal i-manager’s Journal on Mechanical Engineering,

Vol. 3 l No. 4 l

Pp

25-322013

24


“Design and Development of Stewart Platform using Air Muscles”,

InternationalJournal of Innovations in Engineering and Technology (IJIET)

Vol. 3 1 r

pp96-

1032013


Modeling of Temperature Distribution inMetalcutting using Finite Element Method


Vol.4 3 Pp

66-712014

56 A.R.Babu Effects of various parameters on CNMG turning insert in machining Ti-6Al-4V alloy

International Journal of Engineering& Technology Innovations,

Vol.1, 2

Pp13-18

2014

57 A.R.Babu“Fatty Acids Content from Several Microalgae Strains for Biodiesel Fuel,

” International Journal of Mechanical Computational and Manufacturing Research

Vol.2No.1

Pp 28 – 32.

2013

58K. Reddi Prasad

optimization of process parameters of gas metal arc welding process (GMAW) by using design of experiments, , September –

National Journal of Technology,

Vol2No.3

Pp6-11

2013

59M.A. Chakravarthy

Experimentation on Exhaust System Using TWC Converter for Diesel Engine Emissions”

International Journal of Engineering Science Invention,

Vol 2 9pp.45-53

2013

60R. Syam Sudhakar Rao

Dynamic analysis of Chimney shell structure of a Power Plant

International Journal of advances in Arts, Sciences and Engineering (iJOAASE),

Vol 1, 3,

pp 217-220.

2013

61S.Bheemanjineyulu “Drawing- The engineers language”,

i-manager’s journal on Mechanical Engineering,.

Vol.4, No.2,

pp1-4 2014

62S.Bheemanjineyulu

“A system that helps to sell/buy products with ease”,

i-manager’s journal on Information Technology,

Vol.3, No.1

pp1-4 . 2014

63S.Ramesh Babu “Design and Development of Stewart

Platform using Air Muscles”,


Vol. 3 1

Pp10-17

2013

64Prof.M.Muralidhar

“Wavelet-based De-Noising of ECG Signal by Customized Thresholding”,

International Journal on Electronic and Electrical Engineering, (IJEEE)

vol.11 1-7 2012

25

65Prof.M.Muralidhar

Wavelet based threshold methods with grey incidence degree for De-noising of electrode motion artifact in ECG signals

International Journal of Electronics signals and systems (IJESS)

Vol.1 1-6 2012

66Prof.M.Muralidhar Comparison of Parallel prefix adders

performance in an FPGA

International Journal for Computer application

vol.3 62-67 2012

67Prof.M.Muralidhar A New approach to implement

parallel prefix adders in an FPGA

International Journal for Computer application

Vol 21524-1528

2012

68Prof.M.Muralidhar

System for PV Power Generation using FPGA A Novel 2-Stage Power Conditioning

International Journal of Advanced Research in Electrical, Electronics and Instrumentation Engineering

Vol 3 1-6 2014

69Prof.M.Muralidhar

Throughput Maximization in Cognitive Radio Networks using Levenberg – Marquardt Algorithm

International Journal of Advanced Research in Computer and Communication Engineering,

Vol. 4315-319

2015

70Prof.M.Muralidhar

Hidden Markov based Channel State Prediction in Cognitive Radio Networks

International Journal of Engineering Research & Technology (IJERT)

Vol. 4,391-394

2015

71 Prof. K.Eswaramma

Design and Performance Evaluation of Direct Torque and Indirect Flux Control of BLDC Motor

Global Research Analysis

Vol. 2 48-52 2013

72 Prof.K.Eswaramma

Modeling and Control of Quasi Z-Source Inverter for Advanced Power Conditioning of Renewable Energy Systems

International Journal of Advanced Research in Electrical, Electronics and Instrumentation Engineering (IJAREEIE)

Vol 3136-141

2014

73Mr.K.R.Vadivelu

Artificial Neural Networks for online Assessment of Voltage Stability using FVSI in Power Transmission Systems.

IOSR Journal of Electrical and Electronics Engineering

Vol.7 52-58 2013

74Mr.K.R.Vadivelu

Soft computing technique based reactive power planning using NVSI.

Journal of Electrical Systems

Vol.1189-101,

.2015

75Mr.K.R.Vadivelu Maximum Load-ability Estimation for

Weak Bus Identification Using Fast International Journal of Electrical and

Vol. 3 1-8 2014

26

Voltage Stability Index in a Power Transmission System by Real-Time Approach

Electronics Engineering & Telecommunications

76Mr.K.R.Vadivelu FVSI based Optimal Reactive Power

Planning Using Differential Evolution

International Journal of Advanced Research in Electrical and Electronics Engineering (IJAREEE)

Vol.1 1--12 2013.

77Mr.K.R.Vadivelu

Artificial Intelligence technique based Reactive power planning Incorporating FACTS Controllers in Real Time Power Transmission system.

ACEEE Int. J. on Electrical and Power Engineering

Vol. 5 31-37 2014.

78Mr.K.R.Vadivelu

Fast Voltage Stability Index Based Reactive Power planning using Differential Evolution

Electrical and Electronics Engineering: An International Journal (ELELIJ)

vol 3 51-60 2014

79Mr.K.R.Vadivelu

Soft computing technique based reactive power planning using combining multi-objective optimization with Improved Differential Evolution

International Electrical Engineering (IEEJ), ISSN 2078-2365

Vol.51576-1585

2014

80Mr.K.R.Vadivelu

Imperialistic competitive algorithm (ICA) for solving VAR dispatch Problem

International Electrical Engineering (IEEJ), ISSN 2078-2365

Vol.51696-1702

2014

81Mr.Y.N.Vijayakumar

Compensation of Voltage and current in Multi-Bus/Multi-Feeder system by Using MC-UPQC

International journal of Electrical & Electronics Engineering Research (IJEEER)

Vol 3247-266

2013

82Mr.Y.N.Vijayakumar Performance of small scale Ensuring

the safety and wind turbine with DAQ

International Journal of Advanced Research in Electrical Electronics and Instrumentation Engineering (IJAREEIE)

Vol. 24687-4695

2013

83Mr.Y.N.Vijayakumar

Application of Interline Power flow controller (IPFC) for power transmission system

International Journal of Innovative Research in Electrical, Electronics, Instrumentation and Control Engineering

Vol 22138-2142

2014

84 Mr.S.SenthilSmart Grid Technology Using Multilevel Topologies (Wind-Solar-Pico Hydel)

International Journal of Innovative Research in Science, Engineering and Technology

Vol.23536-3545

2013

27

85 Mr.M.Vishnu VardhanNeuro fuzzy controller and bias voltage generator aided upqc for power quality maintenance

International journal of computer theory & engineering (IJCTE)

Vol.459-66,

2012

86 Mr.M.Vishnu Vardhan

’Unified power quality conditioner for compensating power quality problem: adaptive neuro-fuzzy interference system (anfis)

International journal of electrical engineering and technology (IJEET)

Vol.474-92,

2013

87 Mr.M.Vishnu VardhanAbc and nfc based unified power quality conditioner for compensating power quality problem

Journal of electrical and electronics engineering (iosr-jeee)

Vol.7 1-13, 2013

88 Mr.M.Vishnu VardhanNfc and modified cs algorithm based upqc for compensating power quality problem

International journal of sciences and engineering research(ijser)

Vol.4234-242,

2013

89Mr. C.B.Saravanan

Static synchronous series compensator for series compensation of EHVDC Transmission line (IJAREEIE)


Vol.23180-3190

2013

90Mr. C.B.Saravanan

An ANN based speed control of PMBLDC drive using single stage half bridge PFC Converter

International Journal of Engineering Research and applications (IJERA)

Vol.2508-515

2013

91Mr. C.B.Saravanan

An electronic controlled adjustable speed drive of PMBLDC motor using a single phase PFC half bridge converter


Vol.34576-4585

2013

92Mr.G.Bala Sundaram

Implementation of a Battery storage system of an Individual active power control based on a cascaded multilevel PWM Converter


Vol.22928-2935

2013

93 Mr.G.Bala SundaramDesign and Implementation of Current-Fed Boost Converter Using Fuel Cell Concept

Indian Journal of Applied Research

Vol.3280-254

2013

94 Mr.G.Bala SundaramA Newely Constructed Rectifier for Hybrid Wind-Solar Energy System


Vol.2 68-72 2013

95

Mr.G.Bala Sundaram Optimum Location of Static VAR Compensator in over Head Transmission Lines

Paripex-Indian Journal of Research

Vol.299-103

2013

96 Mr.H.Balamurugan PV Solar Cell Real Time Data Monitoring using Lab View and DAQ

International Journal of Advanced Research in Electrical Electronics and Instrumentation

Vol.2 4092-4096

2013

28

Engineering

97 Mr.K.LokanadhamOptimal Location of FACTS Devices in Power Systems Using Genetic Algorithm

Global Journal of Research in Engineering

Vol.10 25-30 2010

98 Mr.G.Venkata PradeepUsage Based Methodology for Transmission Network cost Allocation


Vol.3291-294

2013

99 Ms.K.Dharani sreeUsage Based Methodology for Calculation of Distribution Power by Using Distribution Factors


Vol.3719-724

2013

100 Ms.K.Dharani sreeLocation of super conducting fault current limits for the smart grid with 30MVA wind farm

International Journal of Engineering Research & Technology (IJERT)

Vol.21648-1656

2013

101 Ms.K.BhavaniDesign and performance evaluation of direct torque & Indirect flux control of BLDC motor


Vol 2, 48-52 2013

102 Mr.K.Rama RajuRobust control of sag/swell mitigation using Multi converter Unified Power Quality conditioner

International Journal of Modern Engineering Research (IJMER)

Vol.2,937-940

2012

103 Mr.K.Rama Raju

Performance Analysis of Multi converter Unified Power Quality Conditioner for power quality improvement

International Journal of Engineering Research and Applications (IJERA)

Vol. 2,452-456

2012,

104 Mr.S. Vijaya BhaskarEfficient speed estimation of an induction motor drive using sliding mode observer algorithm

International Journal of Engineering Research & Technology (INERT)

Vol 2,2746-2750

2013

105 Mr.K.JanardhanSimulation of Hybrid Vehicle system using Multi Boost and full bridge converter topology

International Journal of Engineering Research and Technology (IJERT),

Vol. 21390-1397

2013

106 Mr.K.Rama RajuRobust control of sag/swell mitigation using Multi converter Unified Power Quality conditioner

International Journal of Modern Engineering Research (IJMER),

Vol.2937-940

2012

107 Mr.B.KiranDevelopment of Unity Power Factor Electronic Ballast

International Journal of Emerging Technolgoy and Advanced Engineering (IJETIE),

Vol. 3414-418

2013

29

108Mr.C.P.Saikiran ZVT Boost Converter Employing

Auxiliary Resonant Circuit in PV Energy Systems

SSRG International Journal of Electrical and Electronics Engineering

Vol 1 87-92 2014

109Mr.C.P.Saikiran

High Frequency Soft Switching of PWM Boost Converter using auxiliary Resonant Converter


Vol 4172-176

2014.

110Mr.K.Shafi

Fuzzy Based Control Strategy with voltage sustain capability for Distributed Generation Inverters Under Voltage Sags

International Journal of Industrial Electronics and Electrical Engineering (IJIEEE),

Vol. 2108-114

2014

111Mr.C.Dinakaran

Implementation of PMSG based Wind Turbine Generator using with and without Quasi Z-Source Inverter for application of Grid system

Indian Journal of Applied Research

Vol 4171-173

2014

112Mr.C.Dinakaran

Modeling and Simulation of Grid Connected Fuel Cell Distributed Generation using Quasi Z-Source Inverter

International Journal of Scientific Research

Vol 3151-153,

2014

113Mr.C.Dinakaran Design and Implementation of PV

System using Quasi Z-Source Inverter for Distributed Applications

Paripex – Indian Journal of Research

Vol 3 64-67 2014

114Mr.C.Dinakaran

Modeling and control of Quasi Z-Source inverter for Advanced Power Conditioning of Renewable Energy Systems


Vol 3136-141

2014

115Mr.C.Dinakaran

Design and Performance Evaluation of Direct Torque and Indirect Flux Control of BLDC Motor

Global Research Analysis – International

Vol 2 48-52 2013

116Mr.C.Dinakaran

Optimum Location of Static VAR Compensator (SVC) in Over Head Transmission Lines

Paripex – Indian Journal of Research

Vol 2,99-103

2013, .

117Mr.C.Dinakaran A Newly Constructed Rectifier for

Hybrid Wind – Solar Energy System

Global Research Analysis – International

Vol.2 68-722013

118Ms.G.Chandra Kala

Solving Economic Dispatch with valve point loading effects by using optimization techniques

International Journal Of Engineering Science Invention (IJESI),

Vol.3 1-11 2014

119 Mr.M.Subramanyam Speed Control of Separately Excited International Journal Vol 4 90-95 2014

30

DC Motor using a high efficiency flyback converter with new active clamp technique

of Engineering Research and Applications (IJERA),

120Mr.G.Devanatha Reddy

Implementation of Full-Bridge Single-Stage Converter with Reduced Auxiliary Components


Vol.3163-168,

2014

121 Mr.J.Gowri Sankar

Analysis and Simulation of interleaved Boost converter with Hybrid Inverter for Photovoltaic System

International journal of Applied Engineering Research ISSN 0973-4562

Vol.9 1001-1016 2014

122 Mr.J.Gowri Sankar Fuzzy based simulation study on fault diagnosis of inverter fed Drives

International journal of Applied Engineering Research ISSN 0973-4562

Vol. 9 835-845

2014


Design and Implementation of MPPT for Photo voltaic System with Neutral Point Clamped inverter fed Induction Motor Drive

International Journal of Electronic and Electrical Engineering

Vol.735-48 2014


Simulation and Performance Evaluation of Total Harmonic Distortion and FFT Analysis in Multi Carrier Nine-Level Cascade H- Bridge Inverter Using PSIM

Indian Journal of Research Vol. 2

109-113

2013


Implementation of FFT algorithm using floating point numbers in WIMAX communication system

International journal of VLSI and Embedded Systems,

Vol.4pp. (538-543)

2013


Physical designing of peripheral component interconnect

International journal of Electronics & Communication Technology

Volume 3, No:2

---2012


Growth of Superconducting Nano films of YBCO by Spray Pyrolosis Technique and study of Quantum Interference Effects

International journal of Engineering & Technology

Volume 2, No:12

PP.(627-629)

2013

128Dr.C.Chandrasekar

Review of 2D/3D DWT-IDWT VLSI Architectures for Image Compression

International Inder science Journal of Signal and Imaging Systems EngineeringAccepted for publication

--- --- 2014

129 Dr. C. Chandrasekar

Design and Implementation of Image Fusion Technique using DWT for MAV

International Journal of Electronics and communication Technology

VOL 5 40-48 2014

130 Dr.C.Chandrasekar

Dynamic Power Reduction in Modified Lifting Scheme Based DWT for Image Processing

GJRE-F , , Electrical and Electronics Engineering

--- --- 2012

131 Dr.C.Chandrasekar Performance Analysis of Modified GJCST-F , Graphics --- --- 2012

31

Lifting Based DWT Architecture and FPGA Implementation for Speed and Power

& Vision

132 Dr.C.ChandrasekarDesign of High Speed, Low power 2D DWT for Video compression

Journal of Innovation in Electronics and Communication-Special issue

--- --- 2012


Design and implementation of efficient lifting based dwt architecture using Wallace tree multiplier for compression

Journal of engineering research and applications

--- --- 2013


FPGA implementation of systolic array architecture for 3d- dwt optimizing speed and power

IOSR journal of engineering

--- --- 2012

135Mr. Y.Murali Mohan Babu

Fusion and Texture based Classification of Indian Microwave Data - A Comparative Study

International Journal of Applied Engineering Research (IJAER)

Volume 10, Number - 1,

1003-1009

2015


A Survey on De-Speckling of SAR Images

International Journal Of Electronics & Communication Technology (IJECT), Cosmic Journal

Volume-5,

Issue 4,

142-144.

2014


Design And Implementation Of An On-Chip Permutation Network ForMultiprocessor System-On-Chip

International Journal of Electronics

and Communication Engineering (IJECE)

Volume-3,

Issue 6,

1-8.2014


De-Speckling Of Risat-1 Data Using Compressive Sensing Theory

International Journal of Electrical, Electronics and Data Communication

Volume-2,

Issue-11,.

55-57 2014


An application of circular polarization for risat-1 imagery analysis in Rajastan area


Volume-2,

Issue-10,

61-63.

2014


A Novel Implementation of Interpolation based Chase BCH Decoder Using VHDL

International Journal of Recent Technology and Engineering

Volume 5,

Issue 3,

220-224.

2014

141Mr. K. Lokesh Krishna A QoS Based Proactive VHOM

Scheme for Interworking of

International Journal of Innovative Research in

Vol. 2, No. 7

pp.(125-134)

2014

32

WiMAX/WLAN NetworksComputer and Communication Engineering

142Mr. K. Lokesh Krishna

Implementation of high speed pipelined ADC architecture for I-UWB receiver


Vol.1, No.3

pp.(35-41)

2013

143Mr. K. Lokesh Krishna

The design of network coordinator between Zigbee and GPRS for remote monitoring applications

International Journal(ESTIJ)

Vol.3, No.4

pp.(628-632)

2013

144Mr. K. Lokesh Krishna A novel approach to Image

segmentation with application to MRI

International Journal of Scientific & Engineering Research

Vol.4,

No: 7

pp.(855-865)

2013

145M.Murali Mohan Performance analysis of neural

network architecture combined with DWT for image compression

International journal of Computer Applications

Vol.58, No.11

pp. (32-37)

2012

146 M.Murali MohanA novel design of automatic parallel parking system for nonholonomic mobile robot

International journal of artificial intelligent systems and machine learning

Vol.5,

No.5,--- 2013.

147 M.Murali Mohan

FPGA implementation of hybrid architecture for image compression optimized for low power and high speed applications

International journal of Scientific & Engineering research

Vol.4,

No: 5--- 2013

148M.Chithra

Implementation of low power TDES using SOC encounter

International journal of Electronics & Communication Technology

Vol.6, No:2

--- 2012

149V.Jayachandra Naidu

Dynamic bandwidth allocation for wimax by using dynamic priority custom queuing algorithm

International journal of engineering Research & Technology

Vol.2, No:5

--- 2013

150K.Venkatramana Reddy

Intelligent safety system for coal miners using ZIGBEE

International journal of scientific engineering and technology research

Vol.3, No:4

--- 2013

151 K.Venkatramana ReddyIntelligent safety system for coal miners using ZIGBEE


Vol.2, No:4

--- 2013

152B.Shoban babu

Color filter array interpolation for edge strength filters

International journal of engineering trends and technology

Vol:4,

No:7--- 2013

153 B.Shoban babu Effective utilization of a PC International journal Vol.2, --- 2013

33

monitoring ploughing vehicleof engineering research & technology No:5

154B.Shoban babu

Vehicle Verification Based on LG Filters

International journal of Scientific Engineering & technology

Vol.03, Issue.21

Pages:4204-4207

ISSN 2319-8885

2014,

155B.Shoban babu

Design and Analysis of Sequential Elements for Low Power Clocking System with Low Power Techniques

International journal of Engineering & Research and application

Vol. 4, Issue 9 (Version 2),

ISSN : 2248-9622, pp.01-07

2014,

156B.Shoban babu

Dynamic Traffic- Rule- Violation Monitoring and Detection System

International Journal Of Engineering Sciences & Research Technology

ISSN: 2277-9655

157B.Shoban babu

Image Denoising Techniques Using Dual Tree Complex and Hyperanalytic Wavelet Transform With Bi-Shrink Filter


Vol. 4, Issue 4,

ISSN (Print) : 2320 – 3765

ISSN (Online): 2278 – 8875

2015

158M.Sharmila

Analysis of PAPR in precoded OFDM systems for M-QAM

International journal of engineering trends and technology

Vol.4,

No:6--- 2013

159 S.Nagaraj

Automated ambulance detection and gate control with auto-traffic control


Vol.2,

No:7

pp.(552-556)

2013

160 S.NagarajThe campus security tracking system based on RFID and ZIGBEE network

International of smart sensors and ad hoc networks,

Vol.2,

No:3

pp.(23-27)

2012

161 S.NagarajOn chip crosstalk avoidance using low power unique Fibonacci codes

International journal of innovative research & studies

Vol.2,

No:6--- 2013

162 L.Narayana Rao A new technique to decrease leakage power in VLSI circuits

IOSR journal of engineering

Vol.2, pp.(91-

2012.

34

No:8 95)

163L.Narayana Rao

Analysis of mobility management schemes & study on pointer forwarding for wireless mesh networks

International journal of engineering research and applications

Vol.2,

No:2

pp.1162-1167

2012

164Kaustubh Kumar Shukla

Concurrent Error Detection for BCH Encoders and Syndrome Computation

InernationalJournal of Computer Trends and Technology

(IJCTT), Volume-17 Number-1,

Pp 455-461

.2014

165 Mohammad Sadiq AliDesign and Implementation of online BIST Architecture Using SRAM Cells

International Journal & Magazine of Engineering,Technology, Management and Research

Volume No: 2 (2015), Issue No: 4 (April)

Pp 788-795

2015

166 Mohammad Sadiq Ali

Low-Error and High-Throughput Discrete Cosine Transform (DCT) Design

International Journal of Science Engineering and Advance Technology

IJSEAT, Vol 2, Issue 11,

2321-2328

2014

167 Mohammad Sadiq AliEfficient Face Recognition using Regularized Robust Coding

International Journal Of Scientific Engineering & Technology Research

Vol.03,Issue.21

Pages:

4298-4303

2014,

168 Dr.ShaikNaseeraPrediction based job Scheduling Strategy in a volunteer Desktop Grid

Springer Verlag’s Communications in Computer and Information Science

vol. 361

pp. 25-38

2013

169 Dr.ShaikNaseeraA New Approach for Dynamic Job Scheduling in a Volunteer Desktop Grid

International Journal of Computer Applications

61(18)pp. 6-11

2013

170 Dr.ShaikNaseeraTrust based load distribution in a grid environment

International journal of computer science & engineering

vol. 2s, no.1

pp. 24-29

2012

171 Dr.ShaikNaseeraBehaviour Monitoring of a Process in a Computational Grid Using Hidden Markov Model

I manager’s Journal on Computer Science

vol. 1(3)

2013

172 Dr.ShaikNaseeraAgent Based Replica placement in a data grid

Proc. IEEE Int’l Conf. on

pp. 426-

2009

35

Communicational Intelligence, Systems and networking (CICSYN)

430

173 Dr.ShaikNaseeraReplica Tracking algorithm for distributed computing environment

Proc. of International conference on Mobile, Ubiquitous Pervasive Computing (OBCOM), VIT, VELLORE.

39052

174 Dr.ShaikNaseeraSecured Dynamic Data Replication with multi-level trust in data grid environment

Proc. of the First National Conference on Cryptography and Network Security, VIT, Vellore.

2009.

175 Dr. J.JanetA Genetic Optimized Neural Network for Image Retrieval in telemedicine

EURASIP Journal on image and video processing

doi:10.1186/1687-5281-2014-9

2014

176 Dr. J.JanetImproved Energy Efficiency using Distributed Swarm Intelligence (DSI) in Wireless Mobile Networks

CiiT International Journal of Networking and Communications

2013

177 Dr. J.JanetDiscrete Shearlet Transform Based Classification of Micro calcification in Digital Mammograms

Journal of Computer Applications (JCA)

Volume VI, Issue 1,

ISSN: 0974-1925,

2013

178 Dr. J.JanetAn Improved Three Pattern Huffman Compression Algorithm for Medical Images in Telemedicine

V.V Das et al. (Eds.): BAIP 2010, CCIS 702010,Springer-Verlag, Berlin Heidelberg

pp. 263–268,

2010

179 Dr. J.JanetDesign and Implementation of a Hybrid Compression Technique for Ultrasound Images in Telemedicine

(IJCNS) International Journal of Computer and Network Security,

Vol 2 No 7 2010


Distributed keying scheme for Web based coding scheme in Ad Hoc network

International Journal of Wireless Network and Communication

Vol. 2 issue No. 01

pages : 464-469

2011


Exploiting Human-Machine Gap in Image Recognition for Designing CAPTCHAS Using Multicore

International Journal of Research and Reviews in Computer Science (IJRRCS)

Vol. 2, No. 2

2012


Security issues in dynamic Topological Peer to Peer Networks

IJCAEVol.4 ISSUE 3

2013

36


A Study of Asynchronous Routing Protocols in Peer to Peer Networks

International Journal of P2P Network Trends and Technology (IJPTT)

Volume 5

2013


Binary intusion: Intusion detection in multi tier web application)

International Journal of Engineering Trends and Technology (IJETT)

Volume 10 Issue 2

2013


Updating the Routing Position in Ad Hoc Networks by using Adaptive Position

International Journal of Engineering Trends and Technology (IJETT)

Volume 10 Issue 3

2014


Distributed Utility-Based Energy Efficient Cooperative Medium Access Control in MANETS

International Journal of Modern Engineering Research (IJMER)

Vol. 4 Iss. 5

2014


An Adaptive Consistency and Top Caching Schemes for Distributed Data Sharing in Hybrid Peer-to-Peer Systems

International Journal of P2P Network Trends and Technology (IJPTT)

Volume 8

2014


Power aware for Scheduling Tasks in Grid based work flows

International Journal of Communication Networks. Inderscience Publishers (SCOPUS INDEXED).


Fuzzy bee optimization for resources allocation in Grid Computing

International Journal of Engneering Research and Technology(SCOPUS INDEXED).

Vol. 7pp.17-27

2014


Power aware based work flow model optimization using Fuzzy bee colony method

APRN Journal of Engneering and Applied sciences, (SCOPUS INDEXED)

Vol. 9, No. 4

2014


Enhancing Power Unbiased Cooperative Media Access Control Protocol in Manets

International Journal of Engineering Inventionse

Volume 4, Issue 2

PP:08-12

2014

192 Mr. K.ThyagarajanA Model for an Optimal Approach for Job Scheduling in Cloud Computing

International Journal of Engineering Research& Technology

Vol. 2 Issue 10, ISSN: 2278-018

2013

37

193 Mr. K.ThyagarajanEnhancement of Java Access Control using Spring with AOP and AspectJ”

International Journal of Engineering Research & Technology

Vol. 2 Issue 10

2013

194 Mr. K.ThyagarajanComparison of Mobility Management in Mobile IP V 4 & Mobile IP V6 Networks ” May – 2013


Vol. 2 Issue 5,

PP 479-486

2013

195 Mr. J.VelmuruganGEO spatial image retrieval using content based image retrieval technique,

IJRCSVol2 Issue 1.

2012

196 Mr. S.VasuA security model to detect and avoid the active attacks in wireless sensor networks,

IJITEISSN:2229-7367.

2012

197 Mr. S.VasuModel for an Optimal Approach for Job Scheduling in Cloud Computing”


Vol 2 Issue 10

2013

198 Mr. S.VasuAn efficient scheme to obtain proof of data integrity in cloud storage

,National journal on Advances in communication, navigation and computer networks

2012

199Mr. K.Dasaradha Rami Reddy

Risk Management in Software Engineering

IJCSC, Vol 4PP-32-38

2013

200 Mr. P.GovardhanRisk Management in Software Engineering

IJCSC, Vol 4PP-32-38

2013

201 Ms. M. RevathiImpressive Order Invention in Pattern Evolution for Text Mining, ,

IJLTETVol. 2 Issue 4,

2013

202 Mr. B.Palguna KumarEvaluations of MAP Reduced-Inspired Processing Jobs on a Cloud System.

International Journal of engineering trends and technology (IJETT).

Volume-6, Number-4,

2013

203 Mr. B.Palguna Kumar

An Enhanced Scaling Apriori Algorithm to Minimize the Number of Candidate Sets While Generating Association Rules

International Journal of Communications and Engineering (IJCAE).

Volume-3, Issue-3,

Pp 83-89

2012

204 Mr. B.Palguna KumarAn Efficient Resource Allocation for Wireless Multicast in Heterogeneous Networks

International Journal of Advance Research in Computer Science and Software Engineering (IJARCSSE).

Volume-2, Issue-4.

2012

38

206 Dr. B.KotaiahDegradation of Concrete Structures and Protective Measures

International Journal of Engineering Research& Technology(IJERT)

Vol-31415-1420

2012

207 Dr. B.KotaiahEnvironmental Aspects of Iron Ore Mining

International Journal Of Engineering Sciences & Research Technology(IJESRT)

Vol-3 63-73 2012

208 Dr A.V. Narasimha RaoInfluence of Geofabrics on California Bearing Ratio of Expansive Clayey Subgrades

International Journal of Advances in Science and Technology

Vol.4pp 67-73,

2012

209 Dr A.V. Narasimha RaoInfluence of Geofabrics in theConstruction of pavements onExpansive Clayey Subgrades

International Journal of Advances in Engineering and Technology

Vol.3pp 487-493

2012

210 Dr A.V. Narasimha Rao

Influence of composite Reinforcing Elements in the construction of pavements on Expansive Clayey Subgrades

International Journal of Civil Engineering Research

Vol.3pp 87-91

2012

211 Dr A.V. Narasimha RaoInfluence of Mould size on CBRvalues in the onstruction of Pavements on Expansive clayey Subgrades

International Journal of Advanced scientific and Technical Research

Vol.4Pp 621-265

2012

212 Dr A.V. Narasimha RaoSelf-compacting Mortars of Binary and Ternary Cementitious Blending with Metakaolin and Fly ash

International Journal of Civil Engineering and Technology

Vol-4pp 369-384

2013

213 Dr A.V. Narasimha RaoInfluence of Metakaolin and Fly ash on Fresh and Hardened Properties of Self Compacting Concrete

International Journal of Advanced Research in Engineering and Technology

Vol.4pp 223-239

2013

214 Dr A.V. Narasimha RaoEfficacy of Sodium Carbonate and Calcium Carbonate in Stabilizing a Black Cotton Soil.

International Journal of Emerging Technology and Advanced Engineering

Vol-2pp 197-201

2012

215 Dr A.V. Narasimha RaoMix Design Procedure for self compacting concrete

International Organization of Scientific Research Journal of Engineering

Vol-2Pp33-41

2012

216 Dr A.V. Narasimha Rao

Undrained Shear Strength Characteristics of an Expansive Soil Contaminated with Certain Industrial Effluents at Various Pore fluid Content Ratios


Vol-1Pp 58-65

2012

217 Dr A.V. Narasimha RaoThe influence of Metakaolin on the Modulus of Elasticity of Concrete

IOSR Journal of Engineering

Vol-2pp 18-33

2012

39

218 Dr A.V. Narasimha RaoProperties of materials used in self compacting concrete (SCC)

International Journal of Civil Engineering and Technology

Vol-3pp 353-368

2012

219 Dr A.V. Narasimha RaoEffect of Soil Waste Interaction on Geotechnical Properties of Fine- Grained Soils: A Review.

The IUP Journal of soil and Water Science,

Vol-5Pp 72-83

2012

220 Dr. B.Damodhara Reddy

An Experimental Investigation on the performance of mortar cubes by partial replacement of Portland slag cement with and without admixtures

International journal of emerging technology and advanced engineering

Vol 3, pp 438-446

2013


Evaluation of civil and durability properties of Portland slag cement with partial replacement of cement by different mineral and chemical admixtures

International academy of science engineering and technology

Vol. 2, PP 29-38.

2013


Influence of microsilica on the properties of ordinary Portland cement and Portland slag cement with and without superplasticizers

International Journal of engineering and advanced technology

Vol 2pp 610-616

2013


Effect of rice husk ash on properties of ordinary Portland cement and Portland slag cement with and without superplasticizers

International Journal of Civil structural environmental and infrastructure engineering research and development

Vol.3PP 1-8

2013

224 Dr. B.Damodhara ReddyExperimental Investigation on concrete by partially replacement of ware aggregate with junk rubber

The international journal of engineering and science

Volume.02

PP2319-1805

2013

225 Dr. B.Damodhara ReddyExperimental analysis of the use of coconut shell as coarse aggregate

Journal of civil and Civil Engineering

Volume.10

PP.06-13

2014

226 Dr. B.Damodhara ReddyAn Experimental Investigation of strength of granite fines concrete

International journal of science and technology

Volume 4

PP 13-19

2014

227 Prof. M. Mohan BabuGround Water Modeling of Nellore Coastal Zone

International Journal of Civil, Structural,Environmental and Infrastructure Engineering Research and Development

Vol.4 pp.101-110.

2014

228 Prof. M. Mohan BabuAssessment of Saltwater Intrusion Along Coastal Areas of Nellore District, A.P.

International Journal of Scientific & Engineering Research

Vol.4pp.173-178

2013

40

229 Prof. M. Mohan BabuHydrochemical Studies along coastal areas of NelloreDistrict, Andhra Pradesh

International Journal of Engineering and Advanced Technology

Vol.2pp.19-21

2013

230 Prof. M. Mohan BabuAssessment of seawater intrusion into the coastal aquifers in Nellore District

International Journal Of Scientific Research And Education

Vol 2Pp.387-397

2013

231 Prof. M. Mohan BabuHydro chemical Studies In Nellore District

International Journal Of Scientific Research And Education

Vol 2Pp.368-386.

2013

232 Mr.U.Vamsi MohanThe Effect of replacement of soil by more competent Granular fill

IOSR Journal of Civil and Civil Engineering(IOSR-JMCE)

Vol-12Pp10-18

2015

233 Mr.B.Rajasekhar

Study of Behaviour of Optimised Ready mixed Concrete With various blends of Natural & Manufactured Sand as Fine aggregate

Internatuonal Journal of Scientific Research and Engineering Studies(IJSRES)

Vol-2 2015

234 Mr.M.PrakashStudy of Hydro chemical studies in Nellore District

International Journal of Scientific Research and Education

Vol 2pp 368-386

2014

235 Mr.M.PrakashAssessment of Seawater intrusion into the Coastal Aquifers in Nellore District


Vol 2pp 387-397

2014

236 Mr.M.Prakash

Prediction of Behaviour of Natural Soils Versus Artificial Filled Up Soils Based on Compaction Parameters and Effects of Permeability in Summer Storage Tanks

International Journal of Engineering Research and Technology

Vol 3pp 1244-1250

2014

237 Mr.M.Prakash

Study Of Behaviour Of Optimised Ready Mix Concrete With Various Blends Of Natural & Manufactured Sand As Fine Aggregates

International Journal of Scientific Research and Engineering Studies

Vol 2pp 120-131

2014

238 Ms.K.PrathimaSeismic Analysis of Symmetric RC Frame Using Response Spectrum Method and Time History Method


Vol 2pp 470-482

2014

239 Ms.K.Prathima

Effect of Oven Dry Curing And Strength of Geopolymer Mortar Using 12 M Solution At Different Curing Periods


Vol 2pp 483-499

2014

41

240 Mr.Y.GuruPrasadStudy of Hydro chemical studies in Nellore District


Vol 2pp 368-386

2014

241 Mr.Y.GuruPrasadSeismic Analysis of Symmetric RC Frame Using Response Spectrum Method and Time History Method


Vol 2pp 470-482

2014

242 Mr.Y.GuruPrasadEffect of Curing on Expansive Soil Properties Blended With Mudhhanur Fly-Ash

International Journal of Emerging Technology in Computer Science & Electronics

Vol13pp74-77

2015

243 Mr.Y.GuruPrasad

Methods For Selecting Neural Network Architectures In Ann’s For Prediction Of Engineering Properties Of Clayey Soils

International Journal of Emerging Technology in Computer Science & Electronics

Vol 13pp 106-108

2015

b) List of Publications in Conference Proceedings during last five years (Authors Names, Title of Paper, Name of the Conference, Volume, Page nos., Year).

INTERNATIONAL CONFERENCES

Authors Name Title of the Paper Name of the Conference Page Number Year

Dr. O.V. Krishnaiah Chetty,

"Suitable production management -A case study of a Mauritius Company"

International conference on Innovation strategies for value creation and management at RVIM,

2009


‘Studies on Atmospheric Corrosion of Carbon Steel Using Surface Texture Analysis’

Proceedings of Int. Conf. on Advances in Mechanical Engineering – 2010, SVNIT, Surat,

pp 908-911 2010


" Studies on Atmospheric Corrosion of Carbon Steel Through Surface Roughness Analysis Using Different Wavelength Bandwidth’

Proceedings of Int. Conf. on Advances in Mechanical Engineering – 2010, SVNIT, Surat,

pp 763-767 2010

Mr. Y. Santhosh Kumar Reddy

"Stochastic Reliability redundancy design of complex system-Simulation",

International conference Statistics, probability, ope computer science and in conjunction at Andhra University, Vizag

2010

Ms. C.UmamaheswariFabrication and testing of the performance of the solar basin still with stepped type

National Conference on Advances In Mechanical Engineering (NAME 2010) 12th to 13th Nov 2010, Organized by The Department of Mechanical Engineering, JNN College of Engineering, Shimoga

Pp89-94 2010

Ms. C.Umamaheswari

Experimental and theoretical modeling of Thermal Energy Storage system with phase change material”,

National Conference on Emerging Trends in Mechanical Engineering, SVCET, Chittoor, 25th feb

Pp55-59 2012

42

2012.

Dr.A.Mahamani

A study on influence of drilling parameters on surface roughness in machining of AA2219 –TiB2 / ZrB2 in-situ metal matrix composite

International Conference on Engineering,Science and Technology, Dhanalakshmi Srinivasan Engineering College, Prembalur,India, 07, April,2011

Pp 43-38 2011

S. Rama Rao,

“Effect of percentage of reinforcement on MRR and ROC for Al/B4C composites in Electrochemical Machining: A Practical Approach”,

Proceedings of NCRTIME’12, Volume 11

2012

S. Rama Rao,

“Parametric study for radial overcut in electrochemical machining of Al/5% B4C composites”,

12th Global Congress On Manufacturing And Management, VIT University (accepted).

2013

Prof. M. MuralidharA Novel 2-Stage Power Conditioning System for PV Power Generation using FPGA

International Conference on Power, Control & Instrumentation Engineering

March 2014

Prof. K.Eswaramma

Modeling and Control of Quasi Z-Source Inverter for Advanced Power Conditioning of Renewable Energy Systems


28-29th

March 2014

K.R.VadiveluArtificial Intelligence Technique based Reactive power planning using FVSI

IEEE International Conference on Advanced computing and communication systems

archived IEEE Explore DOI:

10.1109/ ICACCS.2013.6938726,Page

No.1-6,

Dec 19-21, 2013 at Sri

Eswar Engineering College, Coimbator

e

K.R.Vadivelu

Artificial Intelligence technique based Reactive power planning Incorporating FACTS Controllers in Real Time Power Transmission system.

2nd International IEEE conference on Electrical Energy systems

-

07-09 January

2014,SSN College of Engineering Chennai

K.R.Vadivelu

Reactive power planning Using Combining Multi-objective optimization with Differential Evolution

Control communication and Power Engineering (ACEEE) Conference at Chennai

Proceeding.ISBN: 978-81-910691-7-8,

pp.No.163-174

February-17th -18th,

2014, Elsevier

K.R.Vadivelu FVSI Optimal Reactive power planning using DE.

IEEE Conference, ICPCES -

27thFebuary, 2014,

Anna university college of Engineering, Chennai

Mr.Y.N.VijayakumarFPGA based speed control of BLDC Motor using sinusoidal PWM pulse

International conference on machine intelligence application to power , signal processing, communication and control (ICMIAPSCCOA)

7th-9th Apr,2011

Mr.S.SenthilPerformance analysis of a four switch 3 phase inverter fed IM Drives

International conference on Electrical engineering and Technology

127-131 2012

Mr.S.Senthil

A New simplified methodology for speed control of dual three phase motors using nine switch current source inverter

International conference on computing and control Engineering

- 2012

43

Mr.S.Senthil

A New simplified methodology for speed control of dual three phase motors using nine switch current source inverter

International conference on Enhancements in Power Electronics and Controls

177-183 2011

Ms.K.Dharani SreeUsage based methodology for transmission network cost allocation

International conference on product development and renewable energy resources,(ICPDRE ) chennai

19-20 Feb 2011

Ms.K .Dharani SreeAnn based design of governor control of two area power system

International level conference18th &

19th April 2012

Mr.H.BalamurganPerformance analysis of non-linear equalizer based on multilayer perception for OFDM power line communication

International conference on Advanced Communication & informatics (ICACI-2009),

11th – 13th

January 2009

Mrs.C.L.Sravanthi ANN based design of governor control of two area power system”

International level conference18th & 19th

April 2012

Mr.C.DinakaranModeling and control of Quasi Z-Source inverter for Advanced Power Conditioning of Renewable Energy Systems


29th March 2014

Mr.C.Dinakaran A Novel 2-Stage Power Conditioning System for PV Power Generation using FPGA

International Conference on Power, Control & Instrumentation Engineering,

28th-29th

March 2014

Mr.J.Gowri Sankar

Simulation and Performance evaluation of Nine –switch Current Source Inverter for Multi load application

International Conference atSASTRA UNIVERSITY

2012

Mr.J.Gowri Sankar

Simulation of Photo Voltaic System Using MPPT Based Perturb and Observe Algorithm with New Step Up DC-DC Converter For Hybrid Electric Vehicle

International Conference on Electrical Science atSASTRA UNIVERSITY

2013

Mr.J.Gowri SankarPerformance Evaluation Of Nine-Level Modified Cascaded Inverter With Different PWM Techniques

International Conference on Electrical Science atSASTRA UNIVERSITY

2013

Mr.J.Gowri Sankar

A New Topology For Regulation Of Active Power By Battery Storage System With Cascaded Multilevel Inverter Using Three Phase System

International Conference on Modeling and Simulation atSASTRA UNIVERSITY

March 2015

Dr. M. Sudhakar ReddyOptimal power flow with TCSC using genetic algorithm

National conference on emerging trends in electrical Engg,

(25-31)February

2009

Dr. M. Sudhakar Reddy Power quality improvement by using universal harmonic filter

International conference on systemics, cybernetics and informatics(Pentagram research center Hyderabad)

(22-24) Jan 2010

Dr. G. Surya Narayana Reddy

Growth of Nano films of YBCO

National Level Technical Symposim,Thanthai Periyar Government Institute of Technology, Vellore

---17 April,

2013

Dr. G. Surya Narayana Reddy

Design aspects of High Speed SQUID electronics

National Level Technical Symposim,MITS, Madanapalle

---28 March,

2014

44

Dr.C.ChandrasekharDesign of 3D-DWT architecture using Systolic Array Based High Speed ID-DWT

International conference on Computer Science & Computational Mathematics (CCSCM2012), Malaysia

33-35March 2012

Dr.C.Chandrasekhar Design of High Speed, Low Power 2D DWT for Video Compression

National Conference on Emerging Trends in Communications & Signal Processing Techniques

---January 2,

2012

Dr.C.ChandrasekharDesign of 3D-DWT architecture using systolic array based high speed 1D-DWT

International conference on innovation in electronics and communication engineering

--- July 2012

Dr.C.ChandrasekharFPGA implementation of Real time video Processing


--- July 2012

Dr.C.ChandrasekharDesign of High Speed, Low Power 2D DWT for Video Compression

National Conference on Emerging Trends in Communications & Signal Processing Techniques

---January

2012

Mr. K.Lokesh KrishnaA Fast Simulation Approach for Inductive Effects of VLSI Interconnects

UGC sponsored National Conference on Planning, Operation and Control of Interconnected Power Systems

36-38March (14-15) 2009

Mr. K.Lokesh Krishna Low Power Scan Testing for Test Data Compression using a Routing-Driven Scan Architecture

National Conference on Advances in Electrical Science (NCAES-2010)

21-24October

21, 2010)

Mr. K.Lokesh Krishna

Performance evaluation of physical layer of mobile Wi-max (802.16-2009)


--- July 2012

Mr. K.Lokesh KrishnaDesign of a medical monitoring system


--- July 2012

Mr. K.Lokesh Krishna3D discrete wavelet transform vlsi architecture for image processing


--- July 2012

Mr. V.Jayachandra Naidu

Design of Reversible Finite Field Arithmetic Circuits with Error Detection

National Conference on Advances in Electrical Science (NCAES-2010)

31-35 Oct 2010


Analysis of symmetric property to improve DFT-based channel estimation algorithm for MIMO-OFDM system

National conference on emerging trends in computers, electronics & power engineering

--- May 2012


High speed parallel architecture for cyclic Convolution based on FNT

National conference on emerging trends in computers, electronics & power engineering

--- May 2012

Mr. S.MuralimohanNonholonomic mobile robot for intelligent parking system

National conference on advance computing and information technology

--- June 2013

45

Ms. M.Sharmila

Automatic road extraction using high resolution satellite images based on level set and mean shift methods

International conference on computing,communication and networking technologies”,(Vivekanada college of engineering for woman, Namakkal,Tamilnadu),

--- July 2013

Ms. M.ChithraTongue based powered wheel chair control system


--- July 2012

Mr. S.ShajahanReal-time computer vision for lanelevel vehicle navigation

National conference on emerging trends in electronics and communication engineering, (Geethanjali institute of science and technology, Nellore),

--- April 2013

Mr. S.ShajahanPipelined 2-d DCT architecture for JPEG image compression using FPGA.

National conference on latest trends and technology, (Brilliant institute of engineering & technology, Hyderabad)

---March 2012

Mr. S.Shajahan

Design and simulation of VLSI architecture for efficient removal of impulse noise”, march 2012.

National conference on latest trends in electronics and communication engineering, (siddharth institute of engineering & technology,puttur),

---March 2012

Mr. S.Shajahan

Analyzing hazardous condition of industrial applications using DTMF technology based wall climbing robot.

National conference on latest trends in electronics and communication engineering, (siddharth institute of engineering & technology,puttur),

---March 2012

Dr. J.JanetEfficient Medical Image Retrieval for Telemedical Applications.

the International Conference on Soft Computing for Problem Solving SocPros IIT Roorkee,

,pp 83-92, 202011

Dr. J.JanetA Novel Image Retrieval Technique for Enhanced Telemedical Applications

IEEE International Conference on Trendz in Information Sciences and Computing , pp. 46-50, 20 2011

Dr. J.Janet

Joint Medical Image Compression based on Wavelets.

the International Conference on Smart Technologies for Materials, Communication, Controls Computing and Energy, ICST 2011 organized by Veltech University and Oklahoma State University, U.S.A

pp. 74-77 2011

Dr. J.Janet

An Improved Three Pattern Huffman Compression Algorithm for Medical Images In Telemedicine”,

the International Conference On Business Administration And Information Processing (BAIP’2010), ISBN 978-3-642-12213-2,

PP. 263-268 2010

46

Mr. K.ThyagarajanPerformance Analysis and Evaluation of handover in Mobile,

National Conference on Advanced Computing Architecture, SVCET, Chittoor, PP 18-22, 2013

Mr. K.ThyagarajanOrganizing User Search History.

National Conference on Data Warehousing & Data Mining, SVCET, Chittoor,

PP 102-104 2013

Mr. K.Thyagarajan

Performance Comparison of Proactive & reactive Multicast Routing Protocols Over Wireless mesh Network, Chittoor,

National Conference onInternet Technologies & Security(NCITS’2011), SVCET,

2011

Mr. K.Thyagarajan

Mr. K.Thyagarajan

A Mechanism for Evaluating Bandwidth in IEEE 802.11 based on Adhoc networks

National Conference on Internet Technologies & Security,(NCITS’2011), SVCET, Chittoor,

2011

Process Analysis and Procedure of Handoff Algorithms in heterogeneous Wireless networks, National Conference on Internet Technologies& Security,(NCITS’2011), SVCET, Chittoor,

National Conference on Internet Technologies & Security,(NCITS’2011), SVCET, Chittoor,

2011

Mr. S.Vasu

Performance Analysis and Evaluation of handover in Mobile. PP 18-22,

NationalConference onAdvanced Computing Architecture”, SVCET, Chittoor

2013

Mr. S.Vasu LiveCommunication among Client and Server.

National Conference on Data Warehousing & Data Mining”, SVCET, Chittoor

PP 23-25 2013

Mr. S.VasuA New Approach for edge detection of poor quality finger print image using entropy

Internal Conference on Emerging Trends in Signal processing and VLSI design GNEC, Hyderabad.

PP 101-105, 2010

Dr. A.V. Narasimha Rao

Effect of certain IndustrialEffluents on California BearingRatio Values of AnExpansive Clayey Subgrade-A Comparatives Study

International Conference on Advances in Civil Manufacturing and Building Sciences

2012


Use of jute in the construction of pavements on Expansive Clayey subgrades

International Conference on Advances in Civil Manufacturing and Building Sciences

2012


Effect of Tannery EffluentContamination on StrengthCharacteristics of Local Soil

A.P. Science Congress-2012 2012

Dr. B.Damodhara Reddy

Strength and Durability of Cementitious Materials with Different admixtures

International conference Statistics, probability, ope computer science and in conjunction at Andhra University, Vizag

2011

47


An Experimental Study on Performance of Mortar Cubes by Partial Replacement of Cement with and without Admixtures”

2nd International Conference on Advances in Civil, Manufacturing and Building Sciences

pp 993-999 2012


Comparative Study on PSC and OPC with Partial Replacement of Different Pozzolanic Materials

Proceedings of International Conference on Advances in Architecture and Civil Engineering

pp 11-16, 21-23 2012

Mr. M. Mohan Babu

Identification of Rainwater Harvesting Structures to Increase the Groundwater Levels at RVS Nagar, Chittoor.

Two Day National Conference On Water, Environment And Society (NCWES)

2014

Mr. M. Mohan BabuAssessment of Seawater Intrusion into the Coastal Aquifers

Global Academic Network International Conference, Los Angeles, May 14-17, 2014

2014

Ms. V.R.Sai DevayaniAdvances in Civil Engineering and Chemistry of Innovative Materials

ACECIM -14,13th march, 2014 International Conferenceat SRM University, Chennai

2014

c) List of scientific/ technical Books written by Faculty Members in the College.

TEXT BOOKS

S.No.Name of the

FacultyTITLE OF THE TEXT BOOKS

ACADEMIC YEAR

1

K.L.Narayana

First year drawing – Premier Publishing House, Hyderabad

2010-2011

2Machine drawing – a text book – Premier Publishing House

2010-2011

3 Metrology - Scitech Publishers 2009-2010

4 Production Technology - IK international Publishers 2009-2010

5 Production Drawing - New Age International Publishers 2009-2010

6 Machine drawing – Wiley Eastern Limited 2008-2009

7 Engineering Graphics - Scitech Publishers 2008-2009

8Engineering Drawing - Scitech Publishers

2008-2009

9Dr. A.V. Narasimha Rao

Numerical problems, Examples and objectives questions in Geotechnical Engineering, Universities press (India) Limited, Hyderabad in the year 2000

2000


Engineering Mechanics, Strength of Materials and Elements of Structural Analysis CBS published and distributors, New Delhi in the 2003

2003

48


Fundamentals of Soil Mechanics University Science Press an Imprint of Laxmi Publications Pvt. Ltd. New Delhi 2010

2010

12 Dr.B.Kotaiah Environmental engineering laboratory manual (in press). Chatoter publishing house, anand (india), 1994

1994

13 Dr.B.Kotaiah Refuse utilization in rural areas. Chapter-6 in rural development n.s.s. Unit of s.v. University, tirupati, 1994.

1994

14 Dr.B.KotaiahLand disposal of liquid wastes. Chapter-8 in current practices in envirornmental science and engineering international overviews, v.3. Ibt publishers & distributiors, delhi, 1987.

1987

PATENT FILED: PATENTS APPLIED FOR NOVEL INVENTIONS BY D.KRISHNAMOHAN RAJU

1. “HIGH TEMPERATURE ISOTHERMAL EXPANSION SYSTEM” Patent

application No.: 2848/CHE/2008.

2. “TWIN ENGINE AUTOMOBILE FOR BETTER FUEL ECONOMY” Patent


3. “AN EFFICIENT COUNTER FLOW HEAT EXCHANGER” Patent application No.:

2850/CHE/2008.

4. “HEAT EXCHANGER TO LIBERATE COOLANT LIQUID HEAT TO

ATMOSPHERE” Patent application No.: 2851/CHE/2008.

5. “MODIFIED AIR SUSPENSION SYSTEM” Patent application No.: 2852/CHE/2008.

6. “VALVE OPERATING MECHANISM WITH FLEXIBILITY IN VALVE OPENING

PERIOD” Patent application No.: 2853/CHE/2008.

7. “PRACTICAL ISOTHERMAL COMPRESSION AND ISOTHERMAL EXPANSION

SYSTEM” Patent application No.: 2854/CHE/2008.

8. “DOUBLE CRANK OPPOSITE CYLINDER ENGINE WITH FLYWHEEL DRIVEN

AT HIGH SPEED” Patent application No.: 2855/CHE/2008.

9. “PARALLEL STEEL WHEEL AND TYRE WHEEL AXLES SYSTEM TO TRAVEL

THE VEHICLE BOTH ON RAILS AND ON ROAD” Patent application

49

No.: 2856/CHE/2008.

10. “VARIABLE CAPACITY RECIPROCATING PISTON MECHANISM” Patent


11. “AIR COOLER WITHOUT WATER PUMP AND MATS” Patent application No.:

1281/CHE/2009.

12. “HIGH HEAT TRANSFER COEFFICIENT COUNTER FLOW HEAT

EXCHANGER” Patent application No.: 1282/CHE/2009.

13. “LOW MANUFACTURING COST REFRIGERATOR” Patent application No.:

1283/CHE/2009.

14. “ENERGY SAVING RADIATOR” Patent application No.: 1284/CHE/2009.

15. “ENERGY SAVING COOKING VESSEL AND STOVE” Patent application No.:

1285/CHE/2009.

16. “MULTIPLE WORM AND WORM WHEEL MECHANISM FOR LIFTING HIGH

LOADS” Patent application No.: 1286/CHE/2009.

17. “SYSTEM TO DELIVER COMPRESSED AIR AT CONSTANT PRESSURE FROM

STORAGE TANK” Patent application No.: 1287/CHE/2009.

18. “STEERING MECHANISM TO ACHIEVE PERFECT STEERING USING CAMS”

Patent application No.: 1288/CHE/2009.

19. “PORTABLE WATER PRODUCTION FROM DRAINAGE WATER USING

REVERSE OSMOSIS TECHNIQUE AND EFFICIENT COUNTER FLOW HEAT

EXCHANGER” Patent application No.: 1289/CHE/2009.

20. “REFRIGERATION SYSTEM USING PRACTICAL ISOTHERMAL

COMPRESSION SYSTEM” Patent application No.: 1290/CHE/2009.

21. “PRACTICAL ERICSON CYCLE ENGINE” Patent application No.: 1291/CHE/2009.

22. “THERMAL POWER PLANT USING STEAM AS WORKING FLUID WITH

ISOTHERMAL EXPANSION SYSTEM” Patent application No.: 1292/CHE/2009.

23. “LIQUID FUEL INJECTION SYSTEM IN THE FORM OF VAPOUR IN THE

I.C.ENGINES” Patent application No.: 1293/CHE/2009.

24. “LIFTING MECHANISM USING HYDRAULIC MOTOR AND MULTIPLE WORM

AND WORM WHEEL MECHANISM” Patent application No:

1294/CHE/2009.

50

25. “DISTILLED WATER PRODUCTION USING EFFICIENT COUNTER FLOW

HEAT EXCHANGER AND COMPRESSOR” Patent application No.: 1295/CHE/2009.

26. “CLOTHE PRESSING IRON FOR REDUCING HUMAN EFFORT” Patent


27. “HIGH HEAT TRANSFER COEFFICIENT STEAM BOILER” Patent application No.:

1297/CHE/2009.

28. “AN INNOVATIVE TUBE LIGHT FRAME” Patent application No.: 1298/CHE/2009.

29. “COMBINED STEEL WHEEL AND TYRE WHEEL SYTEM TO TRAVEL THE

VEHICLES BOTH ON RAILS AND ON ROAD” Patent application No.:

1299/CHE/2009.

30. “HIGH HEAT TRANSFER COEFFICIENT STEAM CONDENSER” Patent


31. “COLLAPSIBLE FRONT AND REAR ATTACHMENTS TO AUTOMOBILES FOR

REDUCING WIND FRICTION” Patent application No.: 1301/CHE/2009.

32. “POWER SAVING FAN” Patent application No.: 1302/CHE/2009.

33. “HEAT PUMP USING PRACTICAL ISOTHERMAL COMPRESSION AND

ISOTHERMAL EXPANSION SYSTEMS” Patent application No.: 1303/CHE/2009.

34. “AN INNOVATIVE WAX LAMP” Patent application No.: 1304/CHE/2009.

35. “PRACTICAL ISOTHERMAL COMPRESSION SYSTEM USING HYDRAULIC

PUMP AND PRACTICAL ISOTHERMAL EXPANSION SYTEM USING

HYDRAULIC TURBINE” Patent application No.: 1305/CHE/2009.

36. “GASKET WITH SELF SEALING PRESSURE” Patent application No.:

1306/CHE/2009.

37. “MULTI PURPOSE ELECTRIC PRIME MOVER FOR HOME NEEDS” Patent


38. “AN INNOVATIVE COMPACT FOLDABLE TROLLEY” Patent application No.:

1308/CHE/2009.

39. “PRESSURISED WATER TANK” Patent application No.: 1309/CHE/2009.

40. “AN EFFICIENT CONTINUOUS VARIABLE TRANSMISSION SYSTEM” Patent


41. “HIGH EFFICIENT FRICTION BELT DRIVE SYSTEM” Patent application No.:

1311/CHE/2009.

51

42. .Krishna Mohan Raju, Dr. G. Jayachandra Reddy, “DESIGN OF COLLAPSIBLE

WIND DRAG REDUCTION ATTACHMENTS TO MOTOR BIKE FOR BETTER

FUEL ECONOMY” Patent application No.: 1704/CHE/2012, , Dated on 02-05-2012.

43. D.Krishna Mohan Raju, Dr. G. Jayachandra Reddy, “DESIGN OF COLLAPSIBLE

WIND FRICTION REDUCTION ATTACHMENTS TO TRUCK FOR BETTER

FUEL ECONOMY” Patent application No.: 1705/CHE/2012, , Dated on 02-05-2012.

44. D.Krishna Mohan Raju, Dr. G. Jayachandra Reddy, “DESIGN OF COLLAPSIBLE

WIND FRICTION REDUCTION ATTACHMENTS TO THE REAR PORTION OF A

CAR FOR BETTER FUEL ECONOMY” Patent application No.: 1706/CHE/2012, ,

Dated on 02-05-2012.

45. D.Krishna Mohan Raju, Dr. G. Jayachandra Reddy, “DSIGN OF EFFICIENT LOW

WIND FRICTION DRAG TRUCK FOR BETTER FUEL ECONOMY” Patent

application No.: 2988/CHE/2012, , Dated on 23-07-2012.

46. D.Krishna Mohan Raju, Dr. G. Jayachandra Reddy, “DSIGN OF EFFICIENT AND

ECONOMICAL LOW WIND FRICTION DRAG BIKE FOR FAMILY” Patent

application No.: 2989/CHE/2012, , Dated on 23-07-2012.

47. D.Krishna Mohan Raju, Dr. G. Jayachandra Reddy, “DSIGN OF EFFICIENT LOW

WIND FRICTION DRAG BUS FOR BETTER FUEL ECONOMY” Patent application

No.: 2987/CHE/2012, , Dated on 23-07-2012.

48. D.Krishna Mohan Raju, Dr. K. Vijaya Kumar Reddy, “DESIGN OF LOW COST

OPERATING MECHANISM TO OPEN AND CLOSE THE COLLAPSIBLE WIND

FRICTION REDUCTION ATTACHMENTS OF BUS” Patent application No.:

5475/CHE/2012, Dated on 28-12-2012.

15. Give a list of Equipment, which are available and functional in the Department costing Rs.5 lakhs and above.

Name of Equipment Year of Purchase Status

CNC Milling Machine & Mini Robot 2010 Working

CNC Lathe 2010 Working

Planning Machine 2009 Working

Milling Machine 2009 Working

Computer Based Variable Compression 2012 Working

52

Ratio Single Cylinder Diesel Engine Test Rig

CROs 2000 to 2007 Working

Function generators 2000 to 2007 Working

Microprocessors & microcontroller Kits 2000 to 2007 Working

Microwave & Optical Communication Kits 2001 Working

Analog Communication & Digital

Communication Kits2001 Working

Universal trainer Kits & DSP trainer Kits 2005 Working

Multisim Software 2007 Working

Matlab Software 2005 & 2011 Working

Tanner Tools Pro Complete VLSI Design

System2009 Working

Active HDL Designer Edition(VHDL & Verilog) 2009 Working

Intel Pentium 2.60 Ghz,G3220T Processor 4Gb RAM, 500GB HDD, ThinkvisonE1922, LEN 18.5 Monitor, LEN Keyboard, LEN Mouse (70 qty)

2015 Working

Nodes IntelPentium®D3.00 GHz, RAM 512 MB, 80 GB HDD, HP 17 ‘’ TFT Monitor, Keyboard, mouse (140 qty)

2008 Working

Intel Xeon Server Processor 2.4 Ghz,2GB RAM,80GB HDD,17.5” LCD ,Keyboard, Mouse, DVD-Writer. (2 qty)

2007 Working

16. Library facilities – List the Journals received in your department/ university library in the concerned discipline.

Indian JournalsS.No. Name of the Journal Volume

1. Journal of the Institution of Engineering(India) – Electrical Engineering 1

2. Power Line – India first power journal 1

3. Lighting India 1

4. Journal of Energy storage & conversion 1

5. Indian journal of power energy system engineering 1

6. Journal Electrical & Electronics Engineering 1

7. Journal of resources energy and development 1

8. The solar quarterly 19. Engineering Today 1

53

10. Claro: Renewable Energy 1

11. Claro: Power Electronics 1

12. Claro: Electronic Components 1

13. Claro: Control Science and Engineering 1

14. Claro: Electrical Engineering 1

15. International Journal of Electrical and Computer Engineering 1

16. International Journal of Photonics 1

17. International Journal of Semiconductor Science and Technology 1

18. International Journal of Neural Network and Applications 1

19. International Journal of Numerical optimization and application 1

20. International Association on Electricity Generation, Transmission and Distribution

1

21. Power Engineer Journal 1

22. Inventi Impact: Power Electronics 1

23. Journal on Electrical Engineering 1

24. Inventi Impact: Energy & Power 1

25. Journal on Power Systems Engineering 1

26. International Journal of Manufacturing science & Technology27. Journal of Scientific and Industrial Research 28. Bulletin of Material Science29. Inventi Impact: Mechanical Engineering30. Claro: Nanotechnology31. Claro: Materials Science32. Claro: Manufacturing Engineering33. Claro: Thermodynamics 34. Innovative ACR35. Institute of Engineers: Metallurgical & Material Engineering36. Institute of Engineers: Mechanical Engineering37. Claro: Mechanical Engineering38. Inventi Impact: Robotics 39. Journal of Resources Energy and Development40. Sadhana – Engineering Sciences41. Journal on Future Engineering & Technology42. Applied Mechanics Reviews43. Journal of Applied Mechanics44. Journal of Biomechanical Engineering45. Journal of Computing and Information Science in Engineering46. Journal of Computational and Nonlinear Dynamics47. Journal of Dynamic Systems, Measurement, and Control48. Journal of Engineering Materials and Technology49. Journal of Electronic Packaging

54

50. Journal of Energy Resources Technology51. Journal of Engineering for Gas Turbines and Power52. Journal of Fuel Cell Science and Technology53. Journal of Fluids Engineering54. Journal of Heat Transfer55. Journal of Mechanical Design56. Journal of Medical Devices57. Journal of Offshore Mechanics and Arctic Engineering58. Journal of Mechanisms and Robotics59. Journal of Manufacturing Science and Engineering60. Journal of Nanotechnology in Engineering and Medicine61. Journal of Tribology62. Journal of Turbomachinery63. Journal of Pressure Vessel Technology64. Journal of Solar Energy Engineering65. Journal of Thermal Science and Engineering Applications66. Journal of Vibration and Acoustics67. Journal of Micro and Nano-Manufacturing

68.ASCE-ASME Journal of Risk and Uncertainty in Engineering Systems, Part B: Mechanical Engineering

69. Journal of Nuclear Engineering and Radiation Science70. Journal on Material Science71. Journal on Mechanical Engineering72. Claro: Industrial Engineering73. Indian Journal of Eng. Material Science74. Institute of Engineers: Production Engineering75. Indian Journal of Radio and Space Physics76. Pramana – Journal of Physics77. IETE Journal of Education78. Claro: Image and Video Processing79. Claro: Robotics80. Claro: Optics81. Claro: VLSI82. Claro: Microwave83. Claro: Telecom84. Claro: Signal Processing85. Claro: Communications & Networking86. Claro: Antennas87. Journal on Electronics Engineering88. IETE Technical Review89. Electronics For You90. Institute of Engineers: Electronics & Telecommunication Engineering

55

91. Journal on Embedded Systems92. International Journal of Wireless Communication and Networking93. International Journal of Embedded Systems and Computer Eng94. International Journal of Electronics and Computers95. Inventi Impact: Antennas & Propagation96. Inventi Impact: VLSI97. Claro: Wireless Communication and Networking98. Claro: Embedded Systems99. Telecommunication Journal100. Journal of High Performance Communication Systems and Networking101. Journal on Mobile Application & Technologies102. Journal on Image Processing103. Journal on Communication Engineering & Systems104. IETE Journal of Research105. International Journal of Data Warehousing106. International Journal of Embedded Software and Open Source Systems107. International Journal of Network and Mobile Technologies108. International Systems Simulation109. Journal of Cybernetics and Systems (JCS)110. Journal of Software Engineering and Technology111. Journal of Software Project Management and Quality Assurance112. Journal of the Ramanujan Mathematical Society113. CSI Journal of Computing 114. Inventi Impact: Comp networks & Communication115. Inventi Impact: Fuzzy Systems116. Inventi Impact: Information Security117. Inventi Impact: Software Engineering118. Claro: Cloud Computing119. Claro: Algorithm120. Claro: Information Security121. Claro: Soft Computing122. Journal on Software Engineering123. Journal on Wireless Communication Networks124. Journal on Information Technology125. Journal on Pattern Recognition126. Journal of Systems and Simulations127. Institute of Engineers: Computer Engineering128. Inventi Impact: Distributed Sensor Networks129. Journal of Intelligent Computing and Applications130. Claro: Computer Engineering

131. International Journal of Electrical and Computer Engineering 1

132. International Journal of Photonics 1

56

133. International Journal of Semiconductor Science and Technology 1

134. International Journal of Neural Network and Applications 1

135. International Journal of Numerical optimization and application 1

136. International Association on Electricity Generation, Transmission and Distribution

1

137. IEEE Aerospace and Electronic Systems Magazine (M-AES)138. Aerospace and Electronic Systems, IEEE Trans. on* (T-AES)139. Affective Computing, IEEE Trans. on* (T-AFFC) 140. IEEE Annals of the History of Computing (M-AHC)141. IEEE Antennas and Propagation Magazine (M-AP)142. Antennas and Propagation, IEEE Trans. on (T-AP)143. IEEE Antennas and Wireless Propagation Letters (L-AWP) 144. Applied Superconductivity, IEEE Trans. on (T-ASC)145. Audio, Speech, and Language Processing, IEEE/ACM Trans.on (T-ASL)

146. Automatic Control, IEEE Trans. on (T-AC)147. Automatica Sinica, IEEE/CAA Journal of (J-AS) 148. Automation Science and Engineering, IEEE Trans. on (T-ASE)149. Autonomous Mental Development, IEEE Trans. on (T-AMD) 150. Bell Labs Technical Journal 151. Big Data, IEEE Trans. on* (T-BD) 152. Biomedical and Health Informatics, IEEE Journal of (J-BHI)153. Biomedical Circuits and Systems, IEEE Trans. on (T-BCAS)154. Biomedical Engineering, IEEE Reviews in (R-BME) 155. Biomedical Engineering, IEEE Trans. on (T-BME)156. Broadcasting, IEEE Trans. on (T-BC)157. China Communications Magazine (M-CHINA)158. IEEE Circuits and Systems Magazine (M-CAS)159. Circuits and Systems for Video Technology, IEEE Trans. on (T-CSVT)160. Circuits and Systems Part I: Regular Papers, IEEE Trans. on (T-CAS1) 161. Circuits and Systems Part II: Express Briefs, IEEE Trans. on (T-CAS2) 162. IEEE Cloud Computing* (M-CC) 163. Cloud Computing, IEEE Trans. on* (T-CC)164. Cognitive Communications and Networking, IEEE Trans. on* (T-CCN) 165. IEEE Communications Letters* (L-COMM)166. IEEE Communications Magazine (M-COMM)167. Communications, IEEE Trans. on (T-COMM)168. IEEE Communications Surveys & Tutorials* (COMST)

169.Components, Packaging, and Manufacturing Technology, IEEE Trans. on

170.Computational Biology and Bioinformatics, IEEE/ACM Trans. on* (T-CBB)

171. Computational Imaging, IEEE Trans. on* (T-CI)

57

172.Computational Intelligence and AI in Games, IEEE Trans. on (T-CIAIG)

173. IEEE Computational Intelligence Magazine (M-CI)174. Computational Social Systems, IEEE Trans. on* (T-CSS)

175.Computer-Aided Design of Integrated Circuits and Systems, IEEE Trans. on

176. IEEE Computer Architecture Letters (L-CA)177. IEEE Computer Graphics and Applications Magazine (M-CG&A)178. Computer Magazine (M-C)179. Computers, IEEE Trans. on* (T-C)180. Computing in Science and Engineering Magazine (CiSE) 181. IEEE Consumer Electronics Magazine (M-CE) 182. Consumer Electronics, IEEE Trans. on (T-CE)183. Control of Network Systems, IEEE Trans. on* (T-CNS) 184. IEEE Control Systems Magazine (M-CS)185. Control Systems Technology, IEEE Trans. on (T-CST)186. Cybernetics, IEEE Trans. on (T-CYB)187. Dependable and Secure Computing, IEEE Trans. on* (T-DSC) 188. IEEE Design and Test Magazine (M-D&T)189. Device and Materials Reliability, IEEE Trans. on (T-DMR) 190. Dielectrics and Electrical Insulation, IEEE Trans. on (T-DEI)191. Display Technology, Journal of (J-DT) 192. Education, IEEE Trans. on (T-E)193. IEEE Electrical Insulation Magazine (M-EI)194. IEEE Electrification Magazine (E-M) 195. IEEE Electromagnetic Compatibility Magazine (M-EMC) 196. Electromagnetic Compatibility, IEEE Trans. on (T-EMC)197. IEEE Electron Device Letters (L-ED)198. Electron Devices, IEEE Trans. on (T-ED)199. IEEE Embedded Systems Letters (L-ES)

200.Emerging and Selected Topics in Circuits and Systems, IEEE Journal on (JETCAS)

201.Emerging and Selected Topics in Power Electronics, IEEE Journal of (J-ESTPE)

202. Energy Conversion, IEEE Trans. on (T-EC)203. Engineering Management, IEEE Trans. on (T-EM)204. Evolutionary Computation, IEEE Trans. on (T-EVC)205. Fuzzy Systems, IEEE Trans. on (T-FUZZ)206. IEEE Geoscience and Remote Sensing Letters (L-GRS) 207. IEEE Geoscience and Remote Sensing Magazine* (M-GRS)208. Geoscience and Remote Sensing, IEEE Trans. on (T-GRS)209. Haptics, IEEE Trans. on* (T-H) 210. Human-Machine Systems, IEEE Trans. on (T-HMS)

58

211. Image Processing, IEEE Trans. on (T-IP)212. IEEE Industrial Electronics Magazine (M-IE)213. Industrial Electronics, IEEE Trans. on (T-IE)214. Industrial Informatics, IEEE Trans. on (T-IINF)215. IEEE Industry Applications Magazine (M-IA)216. Industry Applications, IEEE Trans. on (T-IA)217. Information Forensics and Security, IEEE Trans. on (T-IFS)218. Information Theory, IEEE Trans. on (T-IT)219. IEEE Instrumentation and Measurement Magazine (M-IM)220. Instrumentation and Measurement, IEEE Trans. on (T-IM) 221. IEEE Intelligent Systems Magazine (M-IS)222. IEEE Intelligent Transportation Systems Magazine (M-ITS)223. Intelligent Transportation Systems, IEEE Trans. on (T-ITS) 224. IEEE Internet Computing Magazine (M-IC)225. IEEE Internet of Things Journal* (J-IOT) 226. IT Professional Magazine (M-ITPRO)227. Knowledge and Data Engineering, IEEE Trans. on* (T-KDE)228. Learning Technologies, IEEE Trans. on* (T-LT)229. Light wave Technology, Journal of (J-LT) 230. IEEE Magnetics Letters (L-MAG) 231. Magnetics, IEEE Trans. on (T-MAG)232. Mechatronics, IEEE/ASME Trans. on (T-MECH)233. Medical Imaging, IEEE Trans. on (T-MI)234. IEEE Micro Magazine (M-MICRO)235. Micro electromechanical Systems, Journal of (J-MEMS) 236. IEEE Microwave and Wireless Components Letters (L-MWC)237. IEEE Microwave Magazine (M-MW)238. Microwave Theory and Techniques, IEEE Trans. on (T-MTT)239. Mobile Computing, IEEE Trans. on* (T-MC)

240.Molecular, Biological, and Multi-Scale Communications, IEEE Trans. on*

241. IEEE Multimedia Magazine (M-MULTI)242. Multimedia, IEEE Trans. on (T-MM)243. Multi-Scale Computing Systems, IEEE Trans. on* (T-MSCS) 244. NanoBioscience, IEEE Trans. on (T-NB) 245. IEEE Nanotechnology Magazine (M-NANO)246. Nanotechnology, IEEE Trans. on (T-NANO) 247. Network and Service Management, IEEE Trans. on* (T-NSM) 248. Network Science and Engineering, IEEE Trans. on* (T-NSE) 249. IEEE Network: The Magazine of Global Internetworking (M-NET)250. Networking, IEEE/ACM Trans. on (T-NET)251. Neural Networks and Learning Systems, IEEE Trans. on (T-NNLS)

59

252.Neural Systems and Rehabilitation Engineering, IEEE Trans. on (T-NSRE)

253. Nuclear Science, IEEE Trans. on (T-NS)254. Oceanic Engineering, IEEE Journal of* (J-OE)

255.Optical Communications and Networking, IEEE/OSA Journal of (J-OCN)

256. Parallel and Distributed Systems, IEEE Trans. on* (T-PDS)257. Pattern Analysis and Machine Intelligence, IEEE Trans. on* (T-PAMI)258. IEEE Pervasive Computing Magazine (M-PVC) 259. IEEE Photonics Technology Letters (L-PT)260. Photovoltaics, IEEE Journal of (J-PHOTOV) 261. Plasma Science, IEEE Trans. on (T-PS)262. Power Delivery, IEEE Trans. on (T-PWRD)263. IEEE Power Electronics Magazine (M-PEL) 264. Power Electronics, IEEE Trans. on (T-PEL)265. IEEE Power & Energy Magazine (M-P&E) 266. Power Systems, IEEE Trans. on (T-PWRS)267. Professional Communication, IEEE Trans. on (T-PC)

268.IEEE Pulse: A Magazine of the IEEE Engineering in Medicine and Biology Society

269. Quantum Electronics, IEEE Journal of (J-QE)270. Reliability, IEEE Trans. on (T-R)

271.IEEE Revista Iberoamericana de Tecnologías del Aprendizaje* (IEEE-RITA)

272. Robotics, IEEE Trans. on (T-RO)273. IEEE Robotics and Automation Magazine (M-RA)274. IEEE Security & Privacy Magazine (M-S&P)275. Selected Areas in Communications, IEEE Journal on (J-SAC)

276.Selected Topics in Applied Earth Observations and Remote Sensing, IEEE Journal of (J-STARS)

277. Selected Topics in Quantum Electronics, IEEE Journal of (J-STQE)278. Selected Topics in Signal Processing, IEEE Journal of (J-STSP)279. Semiconductor Manufacturing, IEEE Trans. on (T-SCM)280. IEEE Sensors Journal (J-SEN)281. Services Computing, IEEE Trans. on* (T-SC)

282.Signal and Information Processing over Networks, IEEE Trans. on* (T-SIPN)

283. IEEE Signal Processing Letters (L-SP)284. IEEE Signal Processing Magazine (M-SP)285. Signal Processing, IEEE Trans. on (T-SP) 286. Smart Grid, IEEE Trans. on (T-SG) 287. Software Engineering, IEEE Trans. on* (T-SE)288. IEEE Software Magazine (M-SOFT)

60

289. IEEE Solid-State Circuits Magazine (M-SSC)290. Solid-State Circuits, IEEE Journal of (J-SSC)291. Sustainable Energy, IEEE Trans. on (T-STE) 292. IEEE Systems Journal* (J-SYS)293. IEEE Systems, Man, and Cybernetics Magazine* (M-SMC) 294. Systems, Man, and Cybernetics: Systems, IEEE Trans. on (T-SMC)295. IEEE Technology and Society Magazine (M-T&S)296. Terahertz Science and Technology, IEEE Trans. on (T-THZ) 297. Transportation Electrification, IEEE Trans. on* (T-TE)

298.Ultrasonics, Ferroelectrics, and Frequency Control, IEEE Trans. on* (T-UFFC)

299. IEEE Vehicular Technology Magazine (M-VT)300. Vehicular Technology, IEEE Trans. on (T-VT)301. Very Large Scale Integration Systems, IEEE Trans. on (T-VLSI)302. Visualization and Computer Graphics, IEEE Trans. on* (T-VCG)303. IEEE Wireless Communications Letters (L-WC) 304. IEEE Wireless Communications Magazine (M-WC) 305. Wireless Communications, IEEE Trans. on (T-WC)306. IASH Journal (International Association of Small Hydro)307. IWRA (India) Journal (International Water Resources Association)308. ISRM (India) Journal (International Society of Rock Mechanics)309. Journal of Institution of Engineers (India) – Civil Engineering

310.INCOLD Journal: Technical Journal of Indian Committee on Large Dams

311. Indian Journal of Geosynthetics and Ground Improvement312. TAI Journal (Tunneling Association of India)313. NDC-WWC Journal (New Delhi Centre of World Water Council)314. Journal of Institution of Engineers (India) – Environmental Engineering315. CIGRE India Journal316. Indian Concrete Journal317. Inventi Impact: Structure & Design 318. Inventi Impact: Water & Environment319. Claro: Civil Engineering320. Claro: Structure and Design321. Journal on Civil Engineering322. Journal on Structural Engineering323. Journal of Composites for Construction324. Journal of Construction Engineering and Management

325.Journal of Legal Affairs and Dispute Resolution in Engineering and Construction

326. Journal of Materials in Civil Engineering327. Journal of Engineering Mechanics

61

http://ascelibrary.org/journal/jenmdt

http://ascelibrary.org/journal/jmcee7

http://ascelibrary.org/journal/jladah

http://ascelibrary.org/journal/jladah

328. Journal of Nano mechanics and Micromechanics329. Journal of Environmental Engineering330. Journal of Hazardous, Toxic & Radioactive Waste331. Journal of Hydraulic Engineering332. Journal of Hydrologic Engineering333. Journal of Irrigation and Drainage Engineering334. Journal of Sustainable Water in the Built Environment335. Journal of Water Resources Planning and Management336. International Journal of Geo mechanics337. Journal of Geotechnical & Geo environmental Engineering338. Leadership and Management in Engineering339. Journal of Management in Engineering340. Journal of Professional Issues in Engineering Education & Practice341. Journal of Bridge Engineering342. Practice Periodical on Structural Design and Construction343. Journal of Structural Engineering 344. Journal of Highway and Transportation Research and Development 345. Journal of Infrastructure Systems346. Journal of Transportation Engineering347. Journal of Urban Planning and Development348. Journal of Waterway, Port, Coastal and Ocean Engineering

349.ASCE-ASME Journal of Risk and Uncertainty in Engineering Systems, Part A: Civil Engineering

350. Journal of Aerospace Engineering351. Journal of Architectural Engineering352. Journal of Cold Regions Engineering353. Journal of Computing in Civil Engineering354. Journal of Energy Engineering355. Journal of Performance of Constructed Facilities356. Journal of Pipeline Systems Engineering and Practice357. Journal of Surveying Engineering

62

http://ascelibrary.org/journal/jsued2

http://ascelibrary.org/journal/jpsea2

http://ascelibrary.org/journal/jpcfev

http://ascelibrary.org/journal/jleed9

http://ascelibrary.org/journal/jccee5

http://ascelibrary.org/journal/jcrgei

http://ascelibrary.org/journal/jaeied

http://ascelibrary.org/journal/jaeeez

http://ascelibrary.org/journal/ajrua6

http://ascelibrary.org/journal/ajrua6

http://ascelibrary.org/journal/jwped5

http://ascelibrary.org/journal/jupddm

http://ascelibrary.org/journal/jtpedi

http://ascelibrary.org/journal/jitse4

http://ascelibrary.org/journal/ppscfx

http://ascelibrary.org/journal/jbenf2

http://ascelibrary.org/journal/jpepe3

http://ascelibrary.org/journal/jmenea

http://ascelibrary.org/journal/lmeeaz

http://ascelibrary.org/journal/jggefk

http://ascelibrary.org/journal/ijgnai

http://ascelibrary.org/journal/jwrmd5

http://ascelibrary.org/journal/jswbay

http://ascelibrary.org/journal/jidedh

http://ascelibrary.org/journal/jhyeff

http://ascelibrary.org/journal/jhend8

http://ascelibrary.org/journal/jhtrbp

http://ascelibrary.org/journal/joeedu

http://ascelibrary.org/journal/jnmoco

17. Details of Post-graduate Teaching & Research profile/ plans of the Department for next 5 years.

Mechanical Engineering:

We are having excellent laboratories and faculty members to satisfy the academic

requirements and to do research in the fields of Thermal, Production and Design areas. We are

having CNC Milling machine, and softwares like ANSYS, CATIA, SOLID WORKS etc., in the

CAD /CAM lab to do projects and consultancy works in the Advanced Manufacturing field and

Design Areas. We are having Computer aided Variable compression ratio diesel engine test rig

and computer aided Air Conditioning Test rig to do the projects, Research works and consultancy

works in the areas related to I.C. Engine and Refrigeration and Air Conditioning. We are planning

to start new M.Tech programs in the specialization of Machine Design, Advanced

Manufacturing Systems and Thermal Engineering and B.Tech program of Automobile

Engineering.

Name and Designation of

Faculty

Major areas of Research

Research plan for the next 5 years

Dr. O. Venkata Krishnaiah Chetty, Professor

Production Technology,Industrial Engineering and Management

1. Software development to suit practical as well as research works in the areas of Lot sizing in MRP planning and Travelling salesman problems. Use of Genetic algorithms with suitable modifications to MATLAB tool box is under way.2. Micromachining: Development of Abrasive Jet Machining to suit micro-machining of non-metallic materials. Use of condition monitoring based CNC technology to optimize machining parameters such as nozzle geometry, abrasive type and size, stand off distance, jet velocity etc.3. Productivity improvements: Aims at studying the existing production facilities of industries and model the production to yield economy in factors of production. Industries are being targeted to showcase the results.

Dr. K.L. Narayana, Professor

Production Technology

High performance material development by metal casting

Dr. U. Harinath, Professor

Production Technology

High performance material development by metal casting and properties evaluation

Dr.C.Vijya Baskar Reddy, Professor

Thermal Engineering Development of IC engine emission monitoring system

Dr. A.Mahamani, Professor

Manufacturing Technology

Single, hybrid and multiple reinforcement composite development by in-situ synthesis and tribological performance evaluation

63

Dr. Y. Santhosh Kumar Reddy, Professor

Industrial Engineering

Reliability, availability and maintainability studies on stochastic complex systems with multiple constraints and develop packages for optimum redundancies for maximum reliability .

Dr.G.Naga Malleswara Rao, Professor

Thermal EngineeringA comprehensive study of experimental investigation of an internal combustion engine using alternate fuel

Dr.K.Ravindranath, Professor

Industrial Engineering

Design and development of Manufacturing supply chain

Dr. D.Krishna Mohan Raju, Professor

Finite element of Thermal system and analysis

1. Design, Finite Element Analysis and development of Isothermal Compression and Expansion Systems.2. Design, Finite Element Analysis and development of efficient and economical Solar Collector with 2-axis Automatic Tracking System.3.Design, Finite Element Analysis and development of efficient and economical Ericson Cycle Engine.4.Design, Finite Element Analysis and development of efficient and economical Liquid Air Production System using practical Isothermal Compression Process.5.Design, Finite Element Analysis and development of efficient and economical Liquid Air Production System using practical Isothermal Expansion Process.6.Design and development of low cast 5-axis Robot Indigenously.7.Design, Finite Element Analysis and development of efficient and economical Big Bike for Family (4 to 5 members).8. Design, Finite Element Analysis and development of efficient and economical Refrigeration System.

We are planning to strengthen our department research facilities by procuring Horizontal

machining centre, and computer work stations to do research, projects and consultancy works in

the fields of Manufacturing, Design and Thermal areas. The department is planning to develop the

new economical and efficient technologies related to automobiles, Thermal Power Plants,

Renewable energy utilization systems, High performance material developments etc., and thereby

the students, faculty, college and nation will be benefitted lot.

Department of Electrical and Electronics Engineering (EEE):

The Department of Electrical & Electronics Engineering was established in the year 1998 with

an intake of 40 students and subsequently enhanced to 60 in the year 2001, 90 in 2009 and 120 in 2010 for

B.Tech programme. The Department is offering M.Tech programme with specialization in Power

Electronics and Electric Drives from the academic year 2009-2010 with an intake of 18 and M.Tech

Electrical Power Systems with intake of 24 from the academic year 2014-2015.. The department has

started Diploma Course in Electrical & Electronics Engineering in the academic year 2009-2010 with an

64

intake of 60 and enhanced to 120 in 2010-2011. The department received ISO: 9001 – 2000 certification

and accredited by National Board of Accreditation (NBA), New Delhi in 2006, National Assessment and

Accreditation Council(NAAC), Bangalore, in 2011 and got autonomous status in 2012.


FacultyMajor areas of Research Research plan for the next 5 years

Dr.M.MuralidharPrincipal

1.HV Engineering,2.Instrumentation and control systems3. Fuzzy PI controllers for speed control

1. Hard ware Implementation of Wavelet based threshold Methods with grey incidence in ECG Signals2.A New software development to implement parallel prefix adders in an FPGA

Dr.M.Vishnu Vardhan, Professor

1.Power System Operation and Control

2.Power System Stability and Control

3.Applications of power electronics in power systems

4.Applications of Soft Computing Techniques in Power distribution Systems Utilizations of Renewable Energy Sources in Electrical Power Generation System

1. Software development to suit practical as well as research works in the areas of Power System Operation and Control, Power System Stability and Control using Soft Computing (Artificial Intelligence) Techniques such as fuzzy logic controller, Neural Networks, NFC, Genetic Algorithms.2.Hardware implementations of power electronics devices in power distribution systems3.A Survey on Renewable Energy Sources in India and their utilizations in power generation sectors4.Hybridization of renewable energy sources and their applications in power systems.

Department of Electronics & Communications Engineering (ECE):

In 2008, the department started a PG Program in “VLSI Design” with an intake of 18 students.

Also another PG programs namely Digital Electronics and Communication Systems and

Embedded Systems were started in the year 2010.VLSI Design (shift-II) was started in the year

2013. We are having excellent laboratories and faculty members to satisfy the academic

requirements and to do research in the fields of VLSI, Communication and Embedded system

areas.

The Department has excellent resources to carry out various Research & Development activities

along with good teaching aids. The department has procured THIN FILM MAKING

EXPERIMENTAL SETUP, which contains Chemical Fume Hood equipment, Pellet making

machine & Lock-in – Amplifier which was sanctioned under Research Promotion Scheme (RPS)

by AICTE, New Delhi to carry R&D work. The Department is well equipped with VLSI and DSP

Laboratories for doing research in design and analysis of VLSI, DSP & Embedded system areas

and also as a part of academic project work, PG and UG Students develop live models in our own

laboratories.

65


Faculty



Dr. M.Sudhakara Reddy, Professor

Digital Signal Processing

A Novel Framework for Evaluating Lane Detection Systems

Design and analysis of Eigen face-Domain Super-Resolution for Face Recognition

Design and Implementation of fast clustering algorithm for video abstraction

Theory and Algorithms for Exploiting Sparsity in Signal Processing Applications

Analysis for Efficient change detection for large motion blurred images

Dr.G.Surya Narayana Reddy,Professor

High – Tc Superconductivity and its applications

Design aspects of High Speed SQUID electronics Growth of superconducting thick films of BiSrCaCuO and

study of quantum Interference effects To fabricate Josephson devices using artificial grain

boundary Josephson junctions The flux noise of these films will be investigated.

Prof.A.S.N.Murhty,Professor

Instrumentation and Control Systems

Condition monitoring for robust dynamic reconfiguration of engineering systems.

Output feedback control for uncertain variable structure systems with resets

Development of robust control and estimation paradigms for networked control systems

Dr. C.Chandrasekhar,Professor

Digital Image Processing

Design of model in Image Compression and Fusion techniques using MATLAB tools

Implementation of compression techniques using DWT in Verilog platform

Implementation of Fusion techniques using DWT FPGA development board for Image Registration, Fusion

and Compression ASIC development board for Image Registration, Fusion

and Compression for MAV.

Mr. K.Lokesh Krishna,Associate Professor

Microelectronic Circuits

Design and Implementation of High speed pipelined ADC architecture for high speed communication

Design and Implementation of High Resolution Sigma Delta ADC architecture for high speed communication

Implementation of front end circuits for communication receiver.

Frequency compensation of active-RC LPF Implementation of Hybrid ADC for High speed

communications

Mr. S.Murali Mohan,Associate Professor

VLSI and Image Processing

Performance Analysis of Neural Network Architecture Combined with DWT for Image Compression

FPGA Implementation of Hybrid Architecture for Image Compression Optimized for Low Power and High Speed applications

VLSI Architecture for Fast Computation of 2D-Discrete Wavelet Transform and Low Power Feed Forward Neural Network Architecture for Image Compression

Modified Distributive Arithmetic based 2D-DWT for Hybrid (Neural Network-DWT) Image Compression

Design and VLSI Implementation of Multilayered Neural Network Architecture using Parallel Processing and Pipelining Algorithm for Image Compression

66

Department of Computer Science & Engineering (CSE):

We have an excellent laboratories and faculty members to satisfy the academic requirements and to

do research.The Computer Centre of Computer Science and Engineering Department supports 280

clients across the various wings viz. Laboratory –A, Laboratory –B, Laboratory – C and

Laboratory –B, with three servers- Sun Server , Intel Xeon Server , and Wipro net power server.

The undergoing research and consultancy works in the department are in the areas of Cloud

Computing, Networking, and Data Mining.


Faculty



Dr. J.Janet, Professor

Knowledge Based Systems, Medical Image Processing, Cloud Computing

A Genetic Optimized Neural Network for Image Retrieval in telemedicine

Energy efficiency using SWAM Intelligence. Discrete Sheared Transform Based Classification of Micro

calcification in Digital Mammograms Optimizing Data Movement in Cloud

Mr. K.Thyagarajan, Associate Professor

Computer Network, Cloud Computing.

Optimal approach for Job Scheduling in cloud Mobility Management Enhancement of Java Access Control.

Ms. P.Jyotheeswari Associate Professor

Data Mining,Cloud Computing

Enabling Geographically Distributed Cloud Applications Privacy-Preserving Public Auditing for Shared Data in the

Cloud Scalable Analytics for IaaS Cloud Availability

Mr. S.Vasu Associate Professor

Compiler Design, Advanced Computer Networks

Develop algorithms to resolve SR conflicts and RR conflict in CLR Parsers.

Optimization of Secure Authentication Routing Protocol in Mobile Adhoc Networks

Mr. T Sunil Kumar ReddyAssociate Professor

Computer Network, Cloud Computing.

Design and Analysis of Power aware frame work in job scheduling for heterogeneous networks

Design and analysis of lower consumption algorithms for mobile health applications using 5G technologies

Department of Civil Engineering:

We are having excellent laboratories and faculty members to satisfy the academic

requirements and to do research in the fields of Building Materials, Design Principle, Soil

Mechanics, and Environmental assessment parameters. We are having Digitalized UTM, RCPT

equipment, and Software’s like AUTO CAD,STAAD, ANSYS, etc., in the CAD lab to do projects

and consultancy works in the Civil Engineering field and in Design Areas. We are having

advanced equipments like Accelerated Curing Tank, Ultra Pulse Velocity (UPV), Rebound

Hammer, Tri-axial Compression Testing Equipment, etc. These equipments are used for research

works and consultancy works in the areas related to Civil Engineering field. We are planning to

67

start new M.Tech programs in the specialization of Geotechnical and Transportation Engineering

and Bachelor program in B.Arch.

Name and Designation of Faculty



Dr. B.Kotaiah, Professor

Rapid Environment Impact Assessment of Existing Dyeing Units, Greenbelt Development

1. To collect the data regarding dyeing units.2. To establish effective treatment units in order to remove waste materials in drinking water.3. to develop green belt near industries and to implement green house technology.

Dr. A.V.Narasimha Rao, Professor

Prediction of Ultimate Bearing Capacity and Settlement of Shallow Foundations on Cohesive Soils using Computational Techniques

To develop effective foundation systems for low bearing capacity soils

Dr. S.Venkateswara Rao, Professor

Assessment of water resources for the development of tribal areas

To implement effective utilization of drinking water in tribal areas

Dr. B.Damodhara Reddy, Assoc.Professor

High Performance Concrete by using different admixtures

To development High Performance Concrete

Mr. M.Mohan Babu Professor

Groundwater Modeling & Salt Water Intrusion Modeling

To develop a model for salt water intrusion

Mr. U.Vamsi Mohan Associate Professor

Building MaterialsTo develop conventional concrete by using different admixtures

Mr. B.RajasekharAssociate Professor Building Materials To develop light weight concrete

Details of Research Work Carried out in the Department of Civil engineering

Research work

All the replacement materials stated below were tested for Strength, Durability parameters (i.e.,

Acid, sulphate, Chloride attack tests, Rapid Chloride Permeability Test).

1. Replacement of Cement was done by different mineral admixtures like fly ash, silica fume, Ground

Granulated Blast furnace slag, Rice ash, Metakaolin, Aluminium Dross all these admixtures are

waste by products of different industries.

2. Replacement of Coarse aggregate was done by fly ash pellets and recycled aggregates.

3. Replacement of Fine aggregates was done by quarry dust, bottom ash.GBFS

Future Plan

68

1. It is proposed to procure a loading frame of 10 tonnes capacity for testing beams, (T beam, L

beam) Columns, Slabs under various loading conditions and to determine long and short term

deflections.

2. We are planning to establish Dynamic loading setup and related software in order to find the

dynamic frequencies for structural elements.

3. We are planning to procure XRD and SEM analysis related softwares in order to find the possible

chemical compounds and bonding properties in cement concrete composites.

Expected outcome:

1. To know the effective dosage (replacements) of mineral admixtures and their effective utilization

in the concrete field.

2. By performing XRD analysis we will find the new possible chemical compounds cement concrete

composites.

17. Research and development (R &D)

Vision

To be the best institution to conduct research, which satisfy the technical challenges facing

the human need, to develop advanced technology, to enhance the entrepreneurship skill, to

contribute the economic growth by collaborating with the industries and research

organizations.

Mission

Inculcating the basic and applied research skills to the students to arrive solution to the

engineering problem.

Imparting the creative and innovative skills to the students to solve the technical problems

faced by the human beings.

Sealing the gap between the academia and industry, and making the students suit to the

industry needs.

Providing of entrepreneurship skills to the students to make them from the job seekers to

job providers.

Promote the students and faculty members to put the research effort and thereby to

minimize the importing cost for nation economic growth.

Goals

To encourage the students and faculty members to take up research activities in their field

of interest.

69

To provide good relation between the students and faculty members to take up the useful

research problem in their project works, and to find innovative solution in the projects.

To endorse the industry institute interaction through industry visit and implant training.

To impart entrepreneurship skills by interacting with eminent entrepreneurs and other

financial institutions

To encourage the faculty members and students to publish the research articles in

conference proceedings and journals.

To educate and inspire faculty members to apply funded research project and carry out the

consultancy work.

To organize continuous professional activities in the college by maintaining the good

relations with Professional bodies.

To arrange the expert lectures by inviting the experts from reputed institution, R&D centre

and industry

Short term plan:

To engage the students and faculty members to carry out the research activities

To provide knowledge about various funding agencies and their thrust areas to the faculty

to apply grants.

To arrange the industry visits to the students and faculty members to recognize the

technical challenges faced by the industrial community.

To conduct workshops to the faculty member on “Guidelines to sponsored research”

Long term plan:

To acquire the funded projects from industry and funding agencies

To establish Research centre by collaborating with the affiliated university to carry out

research through the Ph.D scholars

To motivate the students and faculty members to publish more number of articles in

conference proceedings and journals

To launch a student’s forum “Students Innovators Club” and conduct national level project

exhibition.

To improve the brand name of the institution in the field of research and engineering

education in the nation.

To improve the students employability skills to secure maximum placements

70

18. Details of funds requested for 5 years:(in Lakhs )

Sr.No./Items Name Mech. EEE ECE CSE CE TotalA. Equipment (Name of each Equipment)

23.00 25.00 17.00 36.00 27.75 128.75

B. Infrastructure Facilities (Books, Renovation of Labs etc.)

00.70 3.00 00.70 03.40 0.70 8.50

C. Networking & Computational Facilities etc.

00.50 1.50 01.50 03.50 1.00 8.00

D. Maintenance of Equipment 00.30 00.50 00.80 01.00 - 2.60

Total 24.5 30.00 20.00 43.90 29.45 147.85

19. Details of each Budget Heads with full justifications for each item as given at Item No. 18 including details of similar support from any other sources..

Mech.:

A. Equipment (Name of each Equipment):

CIM lab Equipment:

Sl.No. Name of the EquipmentPurchase of equipment

planned(For academic year)

CostLakhs Rs.

1.

Computerized universal testing machine (1000

KN),Model AMT-100E with load stabilizer

2015-16 17.25

Total 17.25

Sl.No. Name of the EquipmentPurchase of equipment


CostLakhs Rs.

1Pin on Disc wear testing equipment with accessories

2015-16 5.75

Total 5.75

71

A. Infrastructure Facilities (Books, Renovation of Labs etc.)

S.No. Name of book Author name Publisher Cost (Rs.)

1Hand book of Design, Manufacturing and Automation

Richard.C.Draf Willy 20,000

2 Introduction to CFD: the finite volume method

H.Versteeg, W.Malalasekara

Prenice Hall Publisher

9,000

3 Machine design data hand book

LingaiahMC graw-Hill school education

7,000

4 Engineering Mechanics of Composite Materials

Issac Danial Oopusa Publisher 8,000

5 The hand book of Modern Manufacturing Techniques

Willian ZonesJaico books Publisher

1,000

6 Design for Manufacturing hand book

G.James barillaMC graw-Hill hand books

7,000

7 ASM hand book-compositesD.B.Niracle and S.L.Donaldson

ASM International Publisher

18,000

Total 0.7 Lakhs

A. Networking & Computational Facilities etc:

Sl.No.Name of the computational

facility

Purchase of equipment

planned(For academic

year)

CostLakhs Rs.

1.

Core I 7 Processor

8 GB RAM

HD 1 TB 3 Nos

2014-15 0.5

A. Maintenance of Equipment

Sl.No. Name of the Equipment Purchase of equipment Maintenance

72

planned

(For academic year)

(Consumable ) Lakhs

Rs.

1.

Computerized universal testing machine (1000 KN),Model AMT-100E with load stabilizer

2015-16 0.15

2.Pin on Disc wear testing equipment with accessories

2015-16 0.15

Total 0.30 Lakhs

73

Sl.NoName of the Equipment

Purchase of equipment planned(For academic year)

Cost

Lakhs Rs.

Justification

1.

Computerized

universal

testing machine

(1000

KN),Model

AMT-100E

with load

stabilizer

2015-16 17.25

This set up is required to test the

mechanical properties like yield strength

ultimate tensile strength and percentage of

elongation of the different materials. The

availability of this machine helps to do the

research projects and consultancy works in

the department. It would also help the PG

and UG students to do their project works.

Total 17.25

Metallurgy laboratory

Sl.NoName of

the Equipment

Purchase of equipment planned(For academic year)

Cost

Lakhs Rs.

Justification

1

Wear

testing set

up 2015-16 5.75

The engineering application such as bearings,

gears, guides, piston rings, brakes and clutches

requires tribological performance. Therefore,

the high performance materials developed need

to test the wear performance. This set up helps

the PG and UG students to test tribological

performance of high performance materials

Total 5.75

74

EEE:

A. Equipments (Name of each Equipment):

S.No. Name of the Equipment


Planned (For academic Year)

Cost in Lakhs

1.

1.Static Negative Sequence Relay kit with source

2015-2016 0.30

2.Determination of dielectric strength of air and oil-kit

2015-2016 0.60

3.Buccholz Relay 2015-2016 1.304.Differential protection of transformer kit 2015-2016 3.505.Electro mechanical type generator protection system

2015-2016 4.00

6.Microcontroller based distance relay (Impedance only)

2015-2016 3.00

7.Electro mechanical type generator protection system

2015-2016 4.00

2.

1. Embedded Systems Tools with necessary kits

2015-2016 1.00

2. AC Drives lab 2015-2016 1.003. PWM Modulation Technique Kits 2015-2016 1.00

Total 19.70

B.Infrastructure Facilities

Books:

S.No Description of item Year of Planning to Cost in Lakhs

1.Hand books for Power Electronics and Industrial automation

2015-2016 0.10

2.Simulation and operating control Tool for Power systems

2016-2017 1.50

Total 1.60

C. Renovation of Labs

75

S.No Name of the labPlanned (For

academic Year)Cost in Lakhs

1. Power Systems 2015-2016 2.00

2. Embedded Systems 2015-2016 1.50

Total 3.50

D. Networking & Computational Facilities etc:

E. Maintenance of Equipments

S.No Name of the Lab


Planned (For academic Year)

Cost in Lakhs

Justification

1. Power systems 2015-2016 15.00

The students are able to know the operation of Relays and co-ordination which are used in power sectors

2. Embedded systems 2015-2016 7.00 To know about Embedded

76

S.No Name of the Equipment

Purchase of

equipment

Planned (For

academic Year)

Cost in

Lakhs

1. Mi Power software package 2014-2015 4.00

Total 4.00

S.No Name of the labPlanned (For

academic Year)

Cost in

Lakhs

1. Power Systems 2015-2016 0.40

2. Electrical Simulation 2015-2016 0.20

3. Embedded systems 2015-2016 0.30

4. AC Drives 2016-2017 0.30

Total 1.20

System Design and to do Embedded controller based experiments like Speed Control of Induction Motor, Synchronous Motor and etc.,

3.AC Drives with PWM kits

2016-2017 8.00

To develop Power Electronic control of AC Drives and Design of DSP, FPGA, Micro Controller Power Electronic Modules.

Total 30.00

ECE:

1. VLSI Design Lab:

Sl.No.

Name of the Equipment

purchase of equipment


Cost

in Rs.Justification

1.

Computer workstation

2 Nos 2015-16 2,00,000

These computer work stations with high end configuration are required Synthesis and Optimization of Digital Circuits. Also complete physical design flow can be performed. These workstations also helps to do the PG project works, consultancy works and research works along with the training of PG students .

2

Synopsis Tool

Design Compiler

(3 user) 2015-16

3,00,000To perform Synthesis and Optimization of Digital Circuits

VCS 3,00,000This software is used to simulate various programs written in VHDL, Verilog and System Verilog

77

3

Universal Trainer kits

CPLD module

2015-16

2,00,000

This trainer kits are used to check the results by using hardware implementationFPGA

(Spartan II)kit2,52,000

Total12,52,000/

-

Communication and Signal Processing Lab:

Sl.No.




year)

Cost

in Rs.Justification

1

DSP Starter kit(DSK) TMS320C6713 with CCS

2016-17 1,48,000 This trainer kits are used to check the results by using hardware implementation.

Total 1,48,000/-

Embedded Systems Lab:

Sl.No.




year)

Cost

in Rs.Justification

1 EMB 51 8 bit microcontroller trainer

2016-17 1,00,000 This trainer kits are used to check the results of various experiments related to 8-

bit.

78

2

EMB PIC 16 bit microcontroller trainer

1,00,000This trainer kits are used to check the

results of various experiments related to 16-bit.

3

EMP ARM 32 bit Embedded ARM processor trainer

1,00,000This trainer kits are used to check the

results of various experiments related to 32-bit.

Total 3,00,000/-

Infrastructure Facilities (Books, Renovation of Labs etc.)

S.No. Description of ItemYear

planned

Cost in Rupees (Lakhs)

1 Hand Books and various National and International

Journals.

1. IEEE Transactions on Antennas and Wireless

Propagation Letters.

2. IEEE Transactions on Automatic Control.

3. IEEE Transactions on Circuits and Devices.

4. IEEE Transactions on Aerospace and Electronic

Systems.

5. IEEE Transactions on Communications and

Networks.

6. IEEE Transactions on Circuits and Systems for

Video Technology.

2013-14 0.7

79

http://ieeexplore.ieee.org/xpl/RecentIssue.jsp?punumber=7727

http://ieeexplore.ieee.org/xpl/RecentIssue.jsp?punumber=7727

7. IEEE Transactions on Computers and Digital

Techniques.

Total 0.7

Networking & Computational Facilities etc:

Sl.NoName of the computational

facility Purchase of equipment planned (For academic year)

Cost in Rupees

(Lakhs)

1.

Core I 7 Processor

8 GB RAM

HD 1 TB 3 Nos

2014-15 1.5

Maintenance of Equipment

Sl.NoName of the Equipment



Maintenance Cost in Rupees (Lakhs)

1.

Digital Systems

and Computer

Electronics

2014-15 0.25

2.Communication

Systems2014-15 0.25

3

VLSI and

Embedded

Systems

2015-16 0.30

Total 0.8

80

CSE:

1. Networking Lab

S.No. / Name of the Equipment


planned (For academic

year)

Cost Justification

A. Equipment (Name of each Equipment)

i. CISCO Routers – 8 Nos

ii. Node Systems -15 Nos


i. Books ii. Renovation of

LabsC. Networking &

Computational Facilities etc.i. Switches

D. Maintenance of Equipment

2014-15

24,00,000.00

5,00,000.00

25,000.00

1,50,000.00

2,00,000.00

50,000.00

This lab is required to learn Networking. The establishment of this lab helps us to do research projects and consultancy works in the area of Networking in our Department. It would also help the PG and UG students to do their project works.

Total 3325000.00

81

2. Cloud Computing Lab

S.No. / Name of the Equipment


planned (For academic year)

CostJustification

A. Equipment (Name of each Equipment) i) Master Nodes

ii) Slave Nodes


i. Books ii. Renovation of

LabsC. Networking &

Computational Facilities etc.i. Switches - 10

D. Maintenance of Equipment

2014-15

5,00,000.00

2,00,000.00

15,000.00

1,50,000.00

1,50,000.00

50,000.00

This lab is required to learn Networking. The establishment of this lab helps us to do research projects and consultancy works in the area of Networking in our Department. It would also help the PG and UG students to do their project works.

Total 10,65,000.00

82

CE:

A. Equipment (Name of each Equipment): SM and CT lab Equipment:

S.No. Name of the EquipmentPurchase of

equipment planned (For academic year)

Cost

Lakhs Rs.

1.

BARTRACKER cover meter with standard search head, carry case, gauge-to-PC transfer cable, battery pack and

2015-16 4.85

2 Universal Testing Machine AIM-UT 100 C (Computerized)

2015-16 10.25

3Loading frame (10 Tonnes)

2015-16 8.40

4Concrete core cutting machine electrically operated For 150 and 300 mm dia core

2015-16 4.25

Total 27.75


S.No. Name of book Author name Publisher Cost (Rs.)

1Advanced Structural Analysis

Cotes, R.C. Couties, M.G. and Kong F.K.

ELBS Publishers 6,000

2 Matrix Structural AnalysisMC.Guire W., and Gallagher R.H.Matrix

John Wiley and sons

6,000

3Plasticity for structural Engineers

Chen, W.F. and Han D.J

Verlag, New York 5,000

4Water and waste water Engineering, water supply and waste water removal

Nazih H, Shammas and Lawrence K.Wang

John Willey and Sons, New Dekgu

8,000

5 Environmental Engineering H.S.Peavy and D.R.Rowe

Mc Graw-Hill publishing company, New

6,000

83

York

6 Mechanics of fluids Bernard Massey Taylor and Francis 6,000

7Elementary Engineering fracture mechanics

David Broek, Battelle Columbus

Columbus, ohien USA

10,000

8ASCE Manual of Engineering practice

ASC ASC, New york 8,000

9 Prestressed Concrete Y.Guyon Wiley and Sons 8,000

10Prestressed concrete design and construction

F.LeohhardtWilhelm Ernst and shon, Berlin

7,000

Total 0.7 Lakhs

C. Networking & Computational Facilities etc:

Sl.NoName of the computational

facility

Purchase of equipment planned (For academic

year)

Cost

Lakhs Rs.

1.

Core I 7 Processor

8 GB RAM

HD 1 TB 4 Nos

2015-16 0.75

2. Networking 2015-16 0.25

Total 1.00

84

20. Specify the recipient of the Grant (Principal / Any other) by attaching an endorsement

from Head of Institution/ University.

The Principal,

Sri Venkateswara College of Engineering and Technology, Chittoor

Name of the bank: State Bank of India

Account number: 31354849304

IFSC Code: SBIN0000825

Address: Main Branch, 18-16, Prakasam High road, Chittoor-517001.A.P

Information submitted as above is true and is correct.

Signature of the Head of the Institution

85

Documents

FIST -CORRECTED-27.05.2015.doc