First Responder Respirator

Embed Size (px)

Citation preview

  • 7/27/2019 First Responder Respirator

    1/2

    capability outlineSCOTT FIRST RESPONDER RESPIRATOR (FRR)

    DESCRIPTION

    Scott FRR is a new respiratory protection system based on the successul design o the Scott GSR (General Service

    Respirator) that has recently been accepted into service with the UK MoD.

    The FRR system is based on a platorm mask that is compatible with conventional round lters with a Din 40 thread,

    Powered Air Puriying Respirators (PAPR) and Scotts global range o Sel Contained Breathing Apparatus (SCBA)

    and compressed air airline breathing systems. With a single mask t test FRR oers the ultimate in operational

    fexibility to First Responders.

    ThE PlATFORm mASk

    ManuacturedromChemicalhardmaterialsthathaveprovencomortcharacteristicsor24hourwearing.

    Twinrevertededgeprimarysealstocombinecomortwithhighprotectionandseladjustingftduring

    ace movement

    Flexible,hardcoatedsinglelenseaturingminimalhazeandexcellentlighttransmissioncharacteristics,

    providing a wide eld o view and impact protection in excess o the requirements o EN166 Class 1.

    Rangeohead-harnessoptions

    BestInClassintegraldrinkingsystemwithuiduptakeinexcesso0.5lpmasrequired.

    Provenintegralspeechdiaphragmthatalsoprovidesacosteectiveinteracewithradioandvoice

    amplication systems without the need or potting microphones in each mask.

    Simplelevel1&2maintenance

    Bestinclassexhalationresistancesinairpuriyingmode

    Hoodintegrationeatures

    Visioncorrectioncapabilitythatincludestheuseoprogressive(vari-ocal)lenses.

    Filtercanbeletorightomaskworn.

    Designedor100%populationftinagerange18-65years.

    RebreathedCO2levelssignifcantlybelow1%

    CanbeusedwithDin40mmthreadedmilitary/LawEnorcementorawiderangeoIndustrialflters

    Harnesssystemcanbelockedotoalloworconsistentft.

    MaskwithinaMask.SecondaryFilterandautomaticsweatclearingsystem

    oers superior comort

  • 7/27/2019 First Responder Respirator

    2/2

    capability outline

    PART NUmBERS

    ar nmr Dsr

    7000342 FRR MASK ASSEMBLY SIZE 1

    7000343 FRR MASK ASSEMBLY SIZE 2

    7000344 FRR MASK ASSEMBLY SIZE 3

    7000345 FRR MASK ASSEMBLY SIZE 4

    7000346 FRR MASK ASSEMBLY SIZE 3/2

    CERTIFICATIONS AND APPROvAlS

    TheFRRmaskisdesignedtoexceedtherequirementsotheollowinginternationalstandardsoracemasks:-

    AS/NZ1716:2003

    EN136-1998:Class3

    EN8468-2:2006

    NIOSHCFR42part84

    OPERATIONAl FlExIBIlITy wITh PAPR, SCBA AND AIRlINE

    The FRR can be congured to operate either singly or in any two combinations o APR, PAPR or Positive Pressure breathingapparatus (SCBA or airline supplied). Conguration is simple. When either SCBA or PAPR is operationally required the

    exhalation valve cartridge is changed in the FRR to one o higher resistance.

    The 40mm thread on both sides o the Scott FRR mask is compatible with lters and PAPR hoses with 40mm male

    connections. When SCBA is required a simple adapter is screwed into either the let or right hand tting which provides

    compatibilitywiththeScottPositivePressureTempestDemandValve.

    When two orms o respiratory equipment are required and tted the wearer can switch between the RPE modes seamlessly

    inthehotzonesoorexample,theoperationisknowntopotentiallyrequirebothairpuriyingfltrationandsuppliedair

    positive pressure capability. The FRR mask is set up with a lter on one side and the Tempest Demand valve on the other

    and the higher breathing resistance exhale cartridge is selected. The SCBA is donned and the cylinder switched on. They

    can then proceed down range protected by the Air Puriying lter until their activity or warning devices require higher

    specic respiratory protection. Simply by covering the end o the lter and breathing in hard the rst breathe mechanism inthe demand valve is activated and positive pressure breathing rom the supplied air cylinder is provided.

    When the operation requires reversal to ltered air protection the demand valve is deactivated by pushing a simple button

    on the demand valve.

    The Scott FRR has been designed to easily accommodate light or right handed shooters, ensuring operational fexibility or

    all users.

    FURThER CAPABIlITy OPTIONS

    The ollowing Scott products are available to urther enhance Scott FRR capability:

    Carriagesystems

    Radiointeraces Speechamplifcationinteraces

    Lensoutsertsoraddedimpact/lensprotection,InraRedandUltraVioletprotectiontothewearer

    Maintenancekits

    Fittestinghardware

    Trainingpackages

    Scott FRR