First Circular / Call for Papers - eastday.comgov.eastday.com/down/others/11te1.doc · Web viewWebsite: Tel: +86-21-26649633 +86-21-56787845 Fax: +86-21-26647738 +86-21-26649633 Baosteel

E-mail: [email protected]

Website: http://BAC.baosteel.comTel: +86-21-26649633

+86-21-56787845 Fax: +86-21-26647738

+86-21-26649633

Baosteel BAC 2010The Fourth Baosteel Biennial Academic

ConferenceNovember 16-18, 2010

Shanghai, China

Final Circular/ Conference Programme

Invitation to Baosteel BAC 2010

The Baosteel Biennial Academic Conference is a significant international academic exchange gathering sponsored by Baosteel Group Corporation, featuring high-level, multi-disciplines and openness, since 2004. Its purpose is to exhibit Baosteel’s technical competence and scientific outcomes, boost the technical exchange and cooperation between domestic steel-making enterprises and research institutions and build up the international exchange platform to follow up the international latest technical progress and development trends.

With the widening impact of the globe financial crisis, steel makers around the world experienced a difficult time, and the recovery will be long-drawn. There is no other choice for the steel industry than to develop new process, new technology and advanced steel products, to practice of low carbon economy, and to improve the resource efficiency.

The Fourth Baosteel Biennial Academic Conference (Baosteel BAC 2010) is scheduled for Nov. 16-18, 2010, in Shanghai, China. All the experts, scholars and engineers worldwide are warmly welcome to participate the all-rounded exchanges on the up-to-date technical innovation and development of the metallurgical process, steel products and application technology, resources and environment, with the theme of Green Steel, Green World.

http://BAC.baosteel.com/

mailto:[email protected]

Organizing Committee

Honorary Chairperson

XU Kuangdi Academician of Chinese Academy of Engineering, China

Conference Chairpersons

XU Lejiang Chairperson of Baosteel Group Corporation, China

WENG Yuqing Chairperson of the Chinese Society for Metals, China

Secretary-General

ZHOU Jianfeng Vice President of Baoshan Iron & Steel Co., Ltd., China

Specially Invited Consultants

DENG Nan Administrative Vice President of China Association for Science and Technology,

China

SHEN Xiaoming Vice Mayor of Shanghai Municipal Government, China

YAN Dongsheng Academician of Chinese Academy of Sciences

Academician of Chinese Academy of Engineering, China

YIN Ruiyu Academician of Chinese Academy of Engineering, China

Ian CHRISTMAS Director General of World Steel Association, Belgium

Shoji MUNEOKA Representative Director and President of Nippon Steel Corporation, Japan

Ekkehard D. SCHULZ Chairman of ThyssenKrupp AG, GermanyJohn J. JONAS Professor of McGill University, Canada

Academic CommitteeChairpersonXU Lejiang Chairperson of Baosteel Group Corporation, China

Vice Chairpersons

LI Haiping Vice President of Planning Committee of Baosteel Group Corporation, China

GAN Yong Vice President of Chinese Academy of Engineering

General Manager of China Iron and Steel Research Institute Group, China

ZHANG Jie Academician of Chinese Academy of Sciences

President of Shanghai Jiao Tong University, China

HE Jicheng President of Northeastern University, ChinaXU Jinwu President of University of Science and Technology Beijing, China

Members: (in alphabetic order by surname)

Harry BHADESHIA Professor of University of Cambridge, UK

Wolfgang BLECK Professor of RWTH Aachen University, Germany

CHEN Guoliang Academician of Chinese Academy of Engineering

University of Science and Technology Beijing, China

Alan W. CRAMB Provost and Senior Vice President for Academic Affairs,

Illinois Institute of Technology, USA

Anthony J. DeArdo Professor of University of Pittsburgh, USA

Roderick I.L. GUTHRIE Director of McGill Metals Processing Center, McGill University, Canada

HONG Jibi Secretary-General of the Chinese Society for Metals, China

HUANG Boyun Academician of Chinese Academy of Engineering

President of Central South University, China

Hae-Geon LEE Dean of Graduate Institute for Ferrous Technology

Pohang University of Science and Technology, Korea

LI Cheng Honorary Chairperson of the Stainless Steel Branch

Chinese Special Steel Association of Enterprise, China

LI Shijun Vice Secretary-General of China Iron and Steel Association, China

LU Ke Academician of Chinese Academy of Sciences

Director, Institute of Metal Research of Chinese Academy of Sciences, China

Pascal PAYET-GASPARD Secretary-General of International Stainless Steel Forum, Belgium

John W. MORRIS Professor of University of California, Berkeley, USA

Kotobu NAGAI Coordinating Director of the Materials Research for the Environment and Energy,

National Institute for Materials Science, Japan

John G. SPEER Professor of Colorado School of Mines, USA

Markus O. SPEIDEL President of Swiss Academy of Material Science, Switzerland

Brian G. THOMAS Professor of University of Illinois, USA

WANG Guodong Academician of Chinese Academy of Engineering,

Northeastern University, China

WANG Xinhua Professor of University of Science and Technology Beijing, China

WANG Yide Academician of Chinese Academy of Engineering

Taiyuan Iron & Steel (Group) Company Ltd., China

Patrick WOLLANTS Director of Department MTM, Katholieke Universiteit Leuven, Belgium

Aibing YU Federation Fellow and Scientia Professor, Academician of Australian Academy of

Engineering, University of New South Wales, Australia

ZHANG Shourong Academician of Chinese Academy of Engineering

Wuhan Iron and Steel (Group) Corporation, China

ZHOU Zhewei Administrative Vice President of Shanghai University, ChinaZUO Tieyong Academician of Chinese Academy of Engineering

Beijing University of Technology, China

Conference Schedule

Monday, November 1509:00-22:00 Conference Registration

Baoshan Hotel19:00-20:00 Welcome Reception

Tuesday, November 1608:00-08:30 Press Conference

Baosteel Research Institute

08:30-08:50 Address and Greeting

08:50-09:40 Plenary Lecture by GAN Yong

09:40-10:20 Plenary Lecture by HE Wenbo

10:20-10:40 Coffee Break

10:40-11:20 Plenary Lecture by Henk REIMINK

11:20-12:00 Plenary Lecture by Shigeru OSHITA

12:15-13:15 Lunch Baoshan Hotel

13:30-17:30 Technical Sessions Baosteel Research Institute

18:00-19:30 Banquet Baoshan Hotel

Wednesday, November 1708:30-12:00 Technical Sessions Baosteel Research Institute

12:15-13:15 Lunch Baoshan Hotel

13:30-17:30 Technical Sessions Baosteel Research Institute

18:00-19:30 Dinner Baoshan Hotel

Thursday, November 189:00-11:00 Baosteel Plant Tour

End of Conference

Technical Session Programme

Session A：IronmakingNovember 16, 13:30-17:30

1* 13:30-14:00 Eiki KASAI Recent collaborative researches between Japanese universities and steel industry on the iron ore agglomeration process

2* 14:00-14:30 CHU Mansheng Situation and development of carbon pellet

3 14:30-14:50 ZHAO Zhixing Research on optimizing ore matching technology for 550m2 sintering machine

4 14:50-15:10 ZHU Deqing Present situation and development of saving energy and reducing emission technology in iron ore sintering process

15:10-15:20 Coffee break

5* 15:20-15:50 YAO Boyuan The guidance method to use mixed coal in blending for Coking

6 15:50-16:10 HU Desheng Discussion on coke passivation technology

7 16:10-16:30 ZHANG Dailin The relation between microstructure characteristics for coal & coke and quality of coke

8 16:30-16:50 CHENG Leyi The effect of CMC process on coke quality

9 16:50-17:10 HE Zhijun Study on The Hot Reactivity Test and Microstructure of Coke

10 17:10-17:30 XU Xiaobin The countermeasure to use low hot strength coke for Bayi Steel's 2500m3 BF

Session A：Ironmaking November 17, 8:30-12:10

1* 08:30-09:00 Christian BOEHM COREX® - Prepared for present and future iron making challenges

2* 09:00-09:30 P. PrachethanKUMAR COREX - learning and innovations at JSW Steel Limited

3* 09:30-10:00 LIN Jinjia Problem and discuss of taphole maintenance of COREX-3000

4 10:00-10:20 LI QiangMathematical simulation of burden distribution in COREX 3000 shaft by discrete element method


5* 10:30-11:00 ZOU Zongshu A brief consideration about PCI of COREX melter-gasifier

6* 11:00-11:30 FANG Jue About an important problem in a melter-gasifier

7 11:30-11:50 FAN Jianfeng The process analysis of fine iron ore reduced in fluidized bed

8 11:50-12:10 XU Hui CFD simulation of gas flow distribution in COREX shaft furnace

Session A：Ironmaking November 17, 13:30-17:30

1* 13:30-14:00 ZHU Renliang Development and discuss of large scale Blast furnace

2* 14:00-14:30 Jan-Olov WIKSTROEM The future of blast furnace ironmaking – a Nordic perspective

3* 14:30-15:00 BI XuegongEnergy conservation and environment protection technologies of the blast furnace under resources deterioration conditions

4 15:00-15:20 XUE Fengping The practice of cleanly production in the iron making plant of Tangshan Iron & Steel Co., Ltd.


5* 15:40-16:10 Aibing YU Numerical modeling of multiphase flow, heat transfer and titanium flow behavior in blast furnace hearth

6 16:10-16:30 DU Shan-Wen Development of Laser and Microwave Scanning Technologies in the Blast Furnace Measurement at CSC

7 16:30-16:50 LIU Qingye Longlife technologies of hearth area for blast furnace at BenGang

8 16:50-17:10 KOU Mingyin Particle size segregation in hopper at bell-less top blast furnace with parallel hoppers

9 17:10-17:30 Yansong SHEN 3D model of coal/coke combustion in a blast furnace: effects of coal and coke properties

Session B：Steel MakingNovember 16, 13:30-17:20

1* 13:30-14:00 ZHENG Yiyu Technology progress and prospects of steelmaking plant at Baosteel

2 14:00-14:20 Ku-Ling CHANG The study of microstructure and phosphorus distribution in converter slag

3 14:20-14:40 YANG Yunqing Analysis of inclusion and purity in steel making

4 14:40-15:00 GAO Xu Reaction mechanism of phosphorus with multi phase fluxes during hot metal


5* 15:20-15:50 Hae-Geon LEE Cu enrichment behavior at steel-scale interface during high temperature oxidation of Cu containing steel

6* 15:50-16:20 Piotr R. SCHELLER Reaction technique in ladle metallurgy

7 16:20-16:40 Benno STEINER Enhanced clean steel tapping on BOF vessels with the INTERSTOP converter gate type CG series

8 16:40-17:00 SUN XinhongBrief of the technology using sliding gate for slag stopping during converter tapping in the steelmaking plant of Baoshan Iron & Steel Co.,Ltd.

9 17:00-17:20Edmundo BurgosCruz

Dissolution of FeNb in liquid steel and best practices to increase niobium recovery during ladle refining

Session B：Steel Making

November 17, 8:30-12:00

1* 8:30-9:00 Toshihiko KOSEKI Microstructure development in high-strength low-alloy steel welds

2 9:00-9:20 CHEN Zhaoping Inclusion control of ultra clean ferritic stainless steel

3 9:20-9:40 LIU ZhongzhuIsothermal precipitation behavior of copper sulfide in ultra low carbon steel

4* 9:40-10:10 JIANG Zhouhua Inclusion generate and control in the process of steelmaking


5* 10:20-10:50 WANG XinhuaStudy on non-metallic inclusions in Al-killed high strength alloy steel refined by high basicity and high Al2O3 slag

6* 10:50-11:20 Jong Jin PARK Thermodynamics of Ti in liquid steels and slags

7 11:20-11:40 YANG JianDevelopment of steel plate for large-heat input welding by nanometer precipitates

8 11:40-12:00 Youn-Bae KANGExperiment and thermodynamic investigations on MnO-SiO2-Al2O3-MnS system

Session B：Steel Making

November 17, 13:30-17:30

1* 13:30-14:00 B.G. THOMAS Mold flux entrainment mechanisms

2 14:00-14:20 ZHANG Yongjie Research on the grain refinement under pulsed magnetic field

3 14:20-14:40 WANG Wanlin The effect of in-situ dynamic mold flux melting and crystallization on heat transfer in continuous casting

4* 14:40-15:10 BAO Yanping The evolution of inclusions in Ti stabilized ultra low carbon steel (Ti-IF) Steel


5* 15:30-16:00 Ingo STEINBACH Microstructure evolution and phase transitions in metals simulated by the multi-phase-field method

6* 16:00-16:30 ZHU Miaoyong Research on the behavior of heat transfer in the mold of slab continuous casting machine

7 16:30-16:50 DI MingjunProcess optimization of billet continuous caster and practice verification

8 16:50-17:10 GUO Liangliang Modeling and control of dynamic soft reduction in continuous slab casting

9 17:10-17:30 ZHONG Xiaodan Production practice for quality improvement of GCr15 bloom casting

Session C：Rolling TechnologyNovember 16, 13:30-17:30

1* 13:30-14:00 H. K. D. H. BHADESHIA Novel Concepts in Steel Design

2* 14:00-14:30 Wolfgang BLECK Design of microstructure for damage tolerance in high strength steels

3 14:30-14:50 ZHANG KaiEffect of rolling processes on microstructure refinement of high-grade pipeline steel in non-recrystallization zone

4 14:50-15:10 SONG Chang The grain refining mechanism of C-Mn steel by CSP


5* 15:30-16:00 J. W. MORRIS Jr. Microstructure / property relations in lath martensitic steels

6* 16:00-16:30 John J.JONAS Modeling the flow curve of hot deformed austenite under industrial rolling conditions

7 16:30-16:50 ZHENG Dongsheng Thermomechanical controlled processing of hot rolled multiphase steel containing Nb

8 16:50-17:10 ZHANG WenInvestigation on hot deformation behavior of Q550 high-strength structural steel

9 17:10-17:30 ZHANG Weina Hot workability of high manganese transformation induced plasticity steel


1* 08:30-09:00 XIAO Hong Development of simulation system of strip flatness for hot tandem mill

2* 09:00-09:30 A. Kiet TIEU Optimization of pass schedule to improve strip shape in hot rolling

3 09:30-09:50 YAN Bo Practice to improve the plate camber during hot rolling by optimizing rolling schedule

4 09:50-10:10 GE Mingyi Application of rolling technique lubrication system of 2150 hot rolling line


5 10:30-10:50 WANG Jingtao Application of cluster analysis on optimization of rolling force learning

6 10:50-11:10 MA Zhanfu Analysis the change of roll thermal crown in 1750 hot strip mill

7 11:10-11:30 XU Shilong The analysis and control methods of profile irregular on 1580mm hot rolling mill

8 11:30-11:50 XU GuangEffect of controlled rolling and controlled cooling process on microstructure of Ti-alloyed pipeline for CSP


1* 13:30-14:00 WANG Guodong Progress in the development of the new generation TMCP based on UFC

2 14:00-14:20 YE Xiaoyu The development and application of ultra fast cooling in hot-rolled

3 14:20-14:40 WANG Quansheng Research and control for rolling torque of the heavy plate mill

4 14:40-15:00 SUN Weihua Industrial practice of clad-rolling in heavy steel plate production

5 15:00-15:20 KONG Wei The rolling-process study of thin HSLA heavy plate


6* 15:30-16:00 LI Jun Study on strip buckling in continuous annealing lines/ hot galvanizing

7* 16:00-16:30 Zhengyi JIANG Analysis of strip edge cracks during cold rolling of thin strip

8 16:30-16:50 CHEN Guang Compensation study on the target flatness curve of 6-roll CVC tandem mill

9 16:50-17:10 ZHANG Yan Theory research on use efficacy of emulsion in cold rolling

10 17:10-17:30 Shichao DING A new metal forming branch - millipede forming

Session D：Surface TechnologyNovember 17, 13:30-17:30

1* 13:30-14:00 Christoph METZNER New developments for vacuum coating of steel strips

2 14:00 -14:20 WU Guangxin Effects of rare earth metal addition on microstructure of hot-dip 55%Al-Zn-Si coatings

3 14:20 -14:40 Noriyuki YASUO Thermal spray coating on conductor rolls in electroplating line

4 14:40 -15:00 GENG Shujiang Investigation of electroless Ni-Co-Fe-P coating on stainless steel

5 15:00 -15:20 LI Wentian Analysis and improvement of defect-formation of the strip surface in the hot dip strip coating

15:20 -15:40 Coffee break

6* 15:40-16:10 YU Jianfeng New water-based epoxy system in the corrosion of steel

7 16:10-16:30 ZHANG Jianping Development of environment-friendly coatings for galvanized steel with good conduction and high corrosion resistance

8 16:30-16:50 Rajiv P. EDAVAN Optimising the corrosion performance of pre-painted steels

9 16:50-17:10 Nakamura MITSURU Chrome free surface treatments for galvanized steels: present and future

10 17:10-17:30 YANG Peng Development of Cr-free anti-fingerprint hot-dip galvanizing sheet for household appliances

Session E：Automotive Steel Products

November 16, 13:30-17:301* 13:30-14:00 John SPEER Ultra-high strength sheet steel property developments

2* 14:00-14:30 Hirochi TAKACHIThe controlling factors on metallurgical properties of advanced high strength steel sheets

3 14:30-14:50 LI Ling Notes to TRIP steels and TWIP steels

4 14:50-15:10 DING HuaMicrostructures and mechanical properties of high Mn and high Al steels


5 15:30-15:50 WANG Li Application of Q&P steels in passenger vehicles

6 15:50-16:10Hardy MOHRBACHER

The relevance of niobium microalloying in dual phase steels with optimized mechanical properties

7 16:10-16:30 SHEN YongfenCold rolling deformation and twin behaviour of 20Mn-3Si-3Al-0.043C steel

8 16:30-16:50 Eloy MARTINEZ Microstructure evolution in low carbon boron steels

9 16:50-17:10 JING XuejunMicrostructure design and feasibility of heat forming for new generation high strength multi-phase steels

10 17:10-17:30 XUE Wenyin Cold rolling deformation texture and tensile properties of Fe-30Mn-4Si-4Al-0.093C steel

Session E：Automotive Steel and Silicon Steel Products

November 17，8:30-12:00

1 8:30-8:50 ZHENG JianpingDevelopment of products and production techniques of surface treated steel sheets in Baosteel

2 8:50-9:10 ZHU Guosen Production of cold rolled sheet for auto body

3 9:10-9:25 LIU JunyouCold rolling technologies of advanced high strength steels in ANSTEEL

4 9:25-9:40 XU LongkunAnalysis of the influence of the hot-rolling material on galvanized product

5 9:40-9:55 KANG HaijunThe introduction and solvent of cold rolling automobile sheet surface quality defects in BX STEEL

6 9:55-10:10 ZHAN HuaThe effect of solution constitute on continuous annealing steel plate recrystallization texture and stamping property


7 10:30-10:45 Chien-Chou LINRecent development of electrical steel sheets in China Steel Corporation

8 10:45-11:00 ZHANG FengEffects of tin and sulphur on magnetism and its interaction in effecient non-oritened silicon steel

9 11:00-11:15 QI Feng Research of DP600 high strength steel wheels

10 11:15-11:30 LIU XingquanSpot weldability comparison of high strength steel DP590 with different chemical composition

11 11:30-11:45 SUN GuangInfulence of welding heat input on the HAZ of hot rolled high strength steel

12 11:45-12:00 ZHANG WuInfluence of phosphorus in high strength steel on welding quality in laser welding

Session F：Structure Steel ProductsNovember 17, 13:30-17:30

1* 13:30-14:00Mauro PONTREMOLI

Development and property evaluation of advanced linepipe for future applications in China pipelines grid

2 14:00-14:25 XIE Shiqiang Practice and reflection of Baosteel longitudinal UOE submerged arc welding technologies self-reliance integrated innovation

3 14:25-14:50 Volker FLAXA Hot-rolled strips of up to 19 mm in thickness and their processing to helically welded large diameter pipes of grade X80

4 14:50-15:10 CUI TianchengThe relationship between microstructure and stress-strain behavior in tension in high strength pipeline steel


5* 15:30-16:00 GAO Shan Development of high strength heavy plate A517Q for offshore platform rack

6* 16:00-16:30 ZHANG Xiaohu Recent development in standards of steels used for pressure vessels in china

7 16:30-16:50 XU Li Low temperature and high toughness hull plate researched and produced in Shougang

8 16:50-17:10 CHENG Shichang Review on the domestic manufacturing of advanced boiler steels

9 17:10-17:30 WANG Wei Laboratory development of high performance steel plates with excellent HAZ toughness at large heat inputs

Session G：Steel Tube, Pipe and Bar productsNovember 16, 13:30-17:30

1* 13:30-14:00 Anthony J. DeArdo New pearlitic steels for 21st century rail applications

2 14:00-14:20 HU Donghui The micro-structure of high carbon low alloy steel for 'easy drawing

3 14:10-14:30 XING Xianqiang Present situation and countermeasure of low-alloy spring steel wire rod for domestic automobile

4 14:30-14:50 MIN Yongan Study on a new type nitriding steel micro-alloyed with niobium

5 14:50-15:10 CUI Huaizhou Effect of Boron on inclusions morphology in tire cord steel


6 15:30-15:50 SUN Yunqiu The present and future of the high stress spring material

7 15:50-16:10 WAN Genjie The development of Baosteel wire rod for steel cord

8 16:10-16:20 LU Bingjun Production of 48MnV-C non-heat treatment crankshaft steel by means of converter plus continuous casting and hot rolling process

9 16:20-16:50 BAI Xifeng Development of non-quenched and tempered bolt steel

10 16:50-17:10 YU Wanhua Development of integrated reheating, rolling and cooling models for stelmor production line

11 17:10-17:30 WANG Baoyu Market prediction for steel cord in post-crisis era

Session G：Steel Tube, Pipe and Bar products

November 17, 8:30-12:00

1* 08:30-09:00 YIN Guomao The current status of the steel tube industry in China and thoughts on its future development

2 09:00-09:20 Federico DAGUERRE Alloying OCTG pipes with tungsten

3 09:20-09:40 ZHANG Zhonghua Research and development of nickle-based OCTG used in severe sour oil and gas fields

4 09:40-10:00 DU Fengshan The PQF pass parametric design system of heavy calibre seamless tube


5 10:20-10:40 XIE Huihua Development of high-strength collapse-resistance casing

6 10:40-11:00 WANG Chunxu Investigation on microstructure and properties of a combined precipitation hardening ultrahigh strength steel

7 11:00-11:20 ZHAO Peng Processing practice of baosteel drill pipe

8 11:20-11:40 ZHAO Qianshui Development of the steel AISI 4145HM for senior petroleum drill of BX Steel

9 11:40-12:00 SHI Hongde Product development of Baosteel HFW 610 mill

Session G：Steel Tube, Pipe and Bar productsNovember 17, 13:30-17:30

1* 13:30-14:00 John HALD Prospects for 12Cr martensitic creep resistant steels for 650 °C steam power plant

2 14:00-14:20 WANG Qijiang Development of TP310HCbN(07Cr25Ni21CbN) austenitic stainless steel tube

3 14:20-14:40 WU Zhiying Critical materials selection for 700 ℃ clean and high-efficiency coal-fired boiler

4 14:40-15:00 ZHANG Lefu Corrosion screening tests of candidate materials for supercritical water-cooled reactor

5 15:00-15:20 QI Xiumei Finite element analysis of the bulge defect forming and eliminating on tube continuous rolled by full floating mandrel mill


6 15:30-15:50 SHAN Aidang Precipitation of Laves phase in USC steels

7 15:50-16:10 XU Hong Pipes and tubes used in petrochemical industry

8 16:10-16:30 ZHU Changchun The effect of structure and property of TP347H steel tube for cold deformation

9 16:30-16:50 ZHU Lihui Investigation on the strengthening mechanism of S30432 austenitic heat-resistant steel

10 16:50-17:10 Long Bin The development and the material requirements of Chinese Fast Breeder Reactor

11 17:10-17:30 LIU Junjiang Technical improvements of Baosteel EAF bloom caster production line

Session H：Stainless Steel and its ProcessNovember 16, 13:30-17:20

1* 13:30-14:00 Pascal PAYET-GASPARD Stainless steel and sustainability

2* 14:00-14:30 Hiroki OTA High corrosion resistance 21%Cr-0.4%Cu ferritic stainless steel contributing to resource conservation

3* 14:30-15:00 YANG Ke Study of Cu-rich phase precipitation in austenitic antibacterial stainless steel

4 15:00-15:20 WANG ChaoThe refining effect of Fe-Ti-N master alloy toward 409L stainless steel


5* 15:40-16:10 Manabu OKU Development of heat-resistant ferritic stainless steels for exhaust lines in Nisshin Steel

6* 16:10-16:40 LI Shi Development & prospect of secondary refining technology for ultra pure ferritic stainless steel

7 16:40-17:00 Mikael ENGHOLM Optimized AOD gas administration – a lean process for a green world

8 17:00-17:20 DONG Wenbo Development and prospect of high performance ferritic stainless steel in architect and construction applications

Session H：Stainless Steel and its ProcessNovember 17, 08:30-12:00

1* 08:30-09:00 JIANG Laizhu Development for high performance nitrogen alloyed stainless steels

2* 09:00-09:30 Markus O.SPEIDEL Recent developments in stainless steels: austenitic, ferritic, duplex

3 09:30-9:50 WANG KuaisheComparison of microstructure and properties between joints of FSW and TIG 316L austenitic stainless steel

4 9:50-10:10 CHI HongxiaoStudy on Microstructure and Mechanical Properties of Martensitic Stainless Steel 6Cr15MoV


5* 10:20-10:50 WANG Lixin The process development and product application of TISCO DSS

6* 10:50-11:20 SUN Chang-Ching Development of duplex Stainless Steel

7 11:20-11:40 SONG ZhigangHot ductility of DSS and its microstructure observation during hot deformation

8 11:40-12:00 LI JunThe effect of W and Cu on the microstructure and properties of Ni-saving 25Cr duplex stainless steels

Session I：Special Steel and its ProcessNovember 16, 13:30-17:20

1 13:30-14:00 F . ABE Boron metallurgy of advanced ferritic power plant steels and welded joints

2 14:00-14:30 John DeBarbadillo Nickel-base superalloys for USC power plants

3 14:30-15:00 Lev B. MEDOVAR Electroslag remelting technologies and equipment: modern achievements & trends of development


4 15:20-15:50 CAO Weidi Development of ultra high strength special steels and wrought nickel base superalloys

5 15:50-16:20Dwaine KLARSTROM

Heat treatment/property relationships for solid-solution strengthened heat resisting alloys

6 16:20-16:50 David K. MATLOCK Development of microalloyed steels for high temperature carburizing

7 16:50-17:20 WANG Ning Baosteel's progressive advance in manufacturing high performance alloy

Session I：Special Steel and its ProcessNovember 17, 8:30-12:10

1 08:30-09:00 DONG Han The development of high quality special steel technology and production in China

2 09:00-09:30 GUO Jianting The development and application of high temperature alloys in energy industry

3 9:30-10:00 XIE Xishan The research and development of high temperature materials for USC power plants


4 10:20-10:50 LIU Zhengdong The state-of-the-art of steel technology used for Chinese power plants and its future

5 10:50-11:10 GU Yuefeng The research and development of new type of ferro-base heat-resistant alloy

6 11:10-11:30 ZHANG Jun Requirement of key structure materials for Chinese big commercial aircraft

7 11:30-11:50 QIN Ming Recent process in special steel, heat treatment and surface modification of automotive components

8 11:50-12:10 CHEN Gousheng Research on GH4169G Alloy for aerospace turbine disk

Session J：Advanced TechnologyNovember 17 , 13:30-17:30

1* 13:30-14:00 Alan W. CRAMB Surface phenomena and continuous casting

2* 14:00-14:30 FANG Yuan New progress of strip casting in Baosteel

3 14:30-14:50 GAO Haiyan Recrystallization behavior of twin roll cast low carbon steel strip

4 14:50-15:10 ZHANG Jieyu Mathematical modeling of fluid flow and level profile during twin-roll strip casting process


5* 15:20-15:50 Kotobu NAGAI Recent progress related with ultra-steels at NIMS

6* 15:50-16:20 LU Ke Austenite steels strengthened by means of nano-scale twins

7* 16:20-16:50 LV Jian Recent developments of the high strength and high ductility nanostructured materials

8 16:50-17:10 FANG Tiehui Surface nanocrystallization in AISI 52100 steel induced by surface mechanical grinding treatment (SMGT)

9 17:10-17:30 ZHANG Junbao High performance nano-structured stainless steel sheet

Session K：Metallurgical Automation

November 16, 13:30－17:10

1* 13:30-14:00 GENG Zhi Causal inference and related statistical methods

2* 14:00-14:30 HUO Jiazhen Research on production scheduling optimization for hot rolling seamless steel tube

3 14:30-14:50 HUANG Kewei Optimization technology of scheduling for hot rolling mill

4 14:50-15:10 XU Yanhong Torpedo car tracking system at China Steel Corporation


5 15:30-15:50 CHE Lan Research and development of production planing management system in 2150mm product line of AnSteel

6 15:50-16:10 ZHANG Qin Prospect of energy management system for large steel enterprise

7 16:10-16:30 SUN Ling Research on the steel-making and continuous-casting scheduling model, algorithm and system

8 16:30-16:50 WANG Guoqing Research and Application of Integrated Process Control Technology at Baosteel

9 16:50-17:10 ZHOU WeiThe two stage case-based reasoning (CBR) technology research on the basis of the expert decision

Session K：Metallurgical Automation

November 17，8:30－12:00

1* 8:30-9:00 WEN ZhiMathematical models and the applications in thermal process of metallurgy

2* 9:00-9:30 LI ChongjianInvestigation on some key problems of large power AC-DC-AC converter

3 9:30-9:50Prabhuraj BHOOPLAPUR

SINAMICS - The high efficiency drive technology for rolling mills

4 9:50-10:10 DENG JianxiongCarbon/oxygen reactions in EAF steel making process and methods for low-carbon and environment-friendly smelting


5 10:20-10:40 LU Lihua Hot rolling reheating furnace model optimization technology

6 10:40-11:00 Shigeru YAMAUCHI The research and application of RFID metallic tag

7 11:00-11:20 MIAO YuchuanResearch on the SQP method used in roll schedule calculation in L2 system of Baosteel’s 5m heavy plate

8 11:20-11:40 Dongmei LIUDevelopment of a new fuzzy-reasoning neural network system for predicting the end-point carbon content of BOF

9 11:40-12:00 JING Xiaogang Application of drive control technology for continuous annealing line

Session L：Metallurgical EquipmentNovember 16, 13:30-17:10

1* 13:30-14:00 Gerald HOHENBICHLER Green thinking in the steel rolling mill

2* 14:00-14:30 WANG Wenxue Adhere to the direction of delicacy in CC technology and equipment

3 14:30-14:50 Massimo ROTTI The Steckel Mill as a green steel strip and plate production technology

4 14:50-15:10 Simon BRUCEReducing energy demand and environmental emissions in secondary steel processing by using modular dry mechanical vacuum pumping systems


5* 15:30-16:00 ZHU Konglin Independent Integration of the 300t BOF of Zhanjiang, in heritage of steel making technologies of baosteel

6* 16:00-16:30 Kenneth WILLIAMS

Particulate flow analysis in inclined pipes and transfer chutes using tomography imaging, discrete element simulations and continuum modelling approaches

7 16:30-16:50 QIU Qin Development of RH technology in China over past decade

8 16:50-17:10 CHEN Guanjun Present development of rolling reheating furnace technology in Shougang

Session L：Metallurgical EquipmentNovember 17 , 8:30-12:00

1* 08:30-09:00 Stephan KREAMER Efficient solutions for HRM modernizations and upgrades

2* 09:00-09:30 Kenji HORRI Application of innovative technologies in the strip rolling mill field

3 09:30-09:50 Bill ROVINS The use of induction heating in hot rolling operations

4 09:50-10:10 WANG Lu Application and practice of regenerative combustion technology on radiant-tube furnace


5* 10:30-11:00 LIU Hongmin Research on the entire roller inlayed block intelligence cold strip shape meter and its industrial application

6 11:00-11:20 LI Wei The new technical progress of hot dip galvanizing process without sink roll

7 11:20-11:40 LI Xiaojie Research and application on the automatic measuring device for testing transverse thickness difference of cold rolling steel sheet

8 11:40-12:00 WANG Junsheng The development and application of cold strip rolling flatness control system in AnSteel

Session M：Engineering TechnologyNovember 17, 13:30-17:30

1* 13:30-14:00 ZHANG YeIndependent integration practice on revamping 4200/3500mm medium and heavy plate rolling mill of bayi steel in terms of process and make-up equipment

2* 14:00-14:30 Sunglin CHEN An RFID system for roll number identification

3 14:30-14:50 Rob BRENDEL Control performance monitoring & advanced control towards energy conservation

4 14:50-15:10 LIAO Libao Technology research of welded metallurgical slag pot and its practice and application in Baosteel


5* 15:30-16:00 CHENG Liangjian Innovative integrating of hot-dipped (aluminizing) galvanizing lines and engineering of related equipment

6* 16:00-16:30 WAN Fei Analysis and calculating for preheat temperature and average convection heat change coefficient in the continue annealing furnace

7 16:30-16:50 LIU Liang The application of Baosteel mechanical and electronic products in the metallurgical logistics management

8 16:50-17:10 ZHOU Guangshen Research and practise on emulsion system for cold rolling line

9 17:10-17:30 HE Daohong Discussion on the design of degreasing process of continual annealing line

Session N：Metallurgical Analysis and Quality ControlNovember 17, 13:30-17:10

1* 13:30-14:00 Ryo INOUE Three dimensional evaluation of inclusion particles in steel

2 14:00-14:20 LI Dongling Study on original position statistic quantitative method for the content of Al in inclusions from steels

3 14:20-14:40 MIAO Lede Discussion on transformation of precipitate phases in 2205 duplex stainless steel with different isothermal treatment situation

4 14:40-15:00 CUI Jun ICP-AES Determination of titanium-iron in the Als, Cu, Mn, P

5 15:00-15:20 ZHANG Jie Phase analysis of Al metal in complex deoxidizer


6* 15:40-16:10 Reinhard BARDENHEIER

Advanced test methods of material property characterization: high strain-rate testing and experimental simulation of multiaxial stress states

7 16:10-16:30 LI Chen Low cycle fatigue estimation of low yield point steel

8 16:30-16:50 H. S. UBHIAn EBSD study of the micro structural development during annealing of a folded super duplex stainless steel sheet sample

9 16:50-17:10 GAO Jiaqiang Characterisation of precipitates in a 9%cr heat resistant steel

Session O：Resources and EnvironmentNovember 16, 13:30-17:30

1* 13:30-14:00 ZHANG Shourong The challenging conditions China’s steel industry has to face and the possible way out

2* 14:00-14:30 HU Xuefa The environmental management, the choice, practice and prospect of Baosteel

3 14:30-14:50 Armelle JOUET A roadmap to carbon clean steel

4 14:50-15:10C. Feliciano-Bruzual

The Bio-PCI a renewable reductant for blast furnaces: where can it flourish?

5 15:10-15:30 Ranen NAG SAIL- striding towards the future with the touch of green


6* 15:40-16:10 Johannes GEDIGA Implementation of a greenhouse gas reduction roadmap for steel producing companies

7 16:10-16:30 Jens APFEL Environmental compliance and profitable steelmaking – always a challenge!

8 16:30-16:50 Chih-Cheng WU Current status and future trends for material flow analysis (MFA) applications at CSC

9 16:50-17:10 Gerhard ENDEMANN Steel's CO2 balance: a contribution to climate protection

10 17:10-17:30 FENG Xiangpeng Carbon dioxide emissions reduction technology and its application prospects in the steel industry

Session O：Resources and Environment

November 17, 8:30-12:00

1* 08:30-09:00Alfons Georges BUEKENS

Destruction and removal efficiency of PICs by various iron ores during sintering

2* 09:00-09:30 CHANG Moobeen Investigation on the Dioxin Emissions from Electric Arc Furnace in Taiwan

3 09:30-09:50 ZHANG Chunxia Status of exhaust pollutantion reduction in sinter process

4 09:50-10:10 Peter PUSCHITZ Latest developments for dry and wet dedusting systems for converter steel making


5* 10:20-10:50 WANG Hua Study on gas utilization for resource in iron & steel factory

6* 10:50-11:20 ZHU Tong Magnetic properties of lean hematite after magnetizing reduction and re-oxidation using fluidized bed

7 11:20-11:40 ZHUANG Weiqi Utilization and recycling of low-temperature waste heat of stainless steel continuous annealing furnace

8 11:40-12:00 ZHANG Yimei The technology and practice of water saving in Baosteel

Session O：Resources and EnvironmentNovember 17, 13:30-17:30

1* 13:30-14:00 YANG Jiakuan Experimental study on glass-ceramics preparation from hot steel slag

2 14:00-14:20 Kristina BESKOW The sustainability of valuable metals – recycling of residues from stainless steel production

3 14:20-14:40 XIAO Yongli Technology status and development of mineral wool made of blast furnace slag

4 14:40-15:00 Juergen RUETTEN Application of the waelz technology on resource recycling of eaf steel mill dust

5 15:00-15:20 WANG Rong The heat recovery simulation in the system of dry granulation of the steel slag


6* 15:40-16:10 Juha YLIMAUNU Challenges in the use of stainless steel slag

7 16:10-16:30 ZHANG Xiaorui Dissolution behavior of various elements from steelmaking slag into seawater

8 16:30-16:50 TANG Weijun Study on rapid stabilization of steel slag powder

9 16:50-17:10 Volker KNOTH Clean and efficient–optimization of EAF dedusting systems

10 17:10-17:30 WU Xingrong Design and experiment on concentration of phosphorus in factory converter slags

Poster PresentationThe poster must be prepared in A0 size (that is : 84 cm x 120 cm) in PORTRAIT mode (vertical), and

should be provided and taken to the Conference by the author.

The poster is fixed on the panel with tacks (provided by organizer). No hook, no hanging tool allowed.

The poster must contain as a general information :

the exact title, the name of each author, the name of the company and the text.

headings and subtitles should have the smallest letters in 80-point font. The font in the text should

not be smaller than 36-points.

Each author will bring with him this poster and will set up on:

Tuesday November 16th, 2010 between 13:30 and 14:30.

Authors are required to stay near their posters for comments during coffee breaks.

Poster will be removed by each author, on:

Wednesday November 17th, 2010 between 16:00 and 17:00.

If posters are not removed, they will be destroyed at the end of the conference.

RegistrationRegistration FeeConferees need to pay registration fee to attend the conference. Discount registration fee is available, if received by October 31, 2010.

Type By 31/10/2010 After 31/10/2010

Domestic guest 1000 RMB /person 1500 RMB/person

Domestic student 500 RMB/person 700 RMB/person

Overseas guest 400 US$/person 500 US$/person

Overseas student 100 US$/person 150 US$/person

Notes ： Student registrants will require a valid student ID to be presented during Conference Registration.

Registration Fee for delegates and students includes:-Have all meals during conference-Attend all technical sessions-Receive all conference documents-Invitation to activities

Method of Registration Advance Registration

Participants are asked to complete Advance Registration Form at http://BAC.baosteel.com or fax the form to +86-21-26647738 or +86-21-26649633 before October 31, 2010

Conference Registration Monday, November 15 /9:00-22:00

Venue：Baosteel Group Baoshan Hotel

Method of Payment Bank Transfer: telegraphic transfer through your bank in US dollars to:Beneficiary Bank: 022595 Industrial and Commercial Bank of China Baoshan Sub-Branch

Bank Address: 1701 Mudanjiang Road, Shanghai 201900, ChinaBeneficiary: BAOSTEEL GROUP BAO SHAN HOTEL Account No.: 1001259509003200111

Cash: Cash on the Registration Desk during Conference Registration.

Credit Card (VISA, MasterCard, Diners Club, American Express or JCB）Notes

No personal check will be accepted.The deadline of bank transfer will be on October 31, 2010.In the Remittance List remitter needs to write: employer/organization, name and word "BAC 2010".The copy of the receipt for remittance should be shown on the Registration Desk during Conference Registration.

AccommodationAccommodation is reserved at Baosteel Group Baoshan Hotel (four star). Room rate is 640 RMB for one night, inclusive one breakfast.Participants need to complete Hotel Reservation Form and fax it to +86-21-56698698 before

October 31, 2010.

TransportationAirport to HotelThere are two airports in Shanghai, which are shown on the map.

Taxi is our recommended means of transportation for first-time visitors. It costs around RMB220 from Pudong International Airport and RMB120 from Hongqiao International Airport to Baosteel Group Baoshan Hotel. Please show the address in Chinese below in case the taxi driver cannot understand you.

Pudong International Airport also operates six bus routes, connecting the airport with different areas in central city. You can take No. 4 bus (open from 8:00 to23:00, departing every 20-30 minutes), and get off at the third stop, Dabaishu stop, then go to the hotel by taxi. It costs about RMB75 but takes longer time. The terminal bus station is outside Airport Gate 16, Floor One of Pudong International Airport.

It is too complicated for foreigners to take public transportation from Hongqiao International Airport to Baosteel Group Baoshan Hotel. Taxi is the best way.

Baosteel Group Baoshan Hotel1813 Mudanjiang Road, Shanghai , ChinaTel: 86-21-56698888

Hotel to Conference SiteBaosteel BAC 2010 will provide shuttle buses between Baosteel Group Baoshan Hotel and conference venue.

Conference SecretariatScience and Technology Association of Baosteel Group Corporation Room 106, Building 0, 889 Fujin Road, Baoshan DistrictShanghai 201900, P.R. China

Mr. ZHANG Yi Tel: +86-21-56787845

Ms. TUO Ximei Tel: +86-21-26649633

Mr. WEN Donghui (technical secretary) Tel: +86-21-26647336

Fax: +86-21-26647738 +86-21-26649633

E-mail: [email protected] Website: http://bac.baosteel.com

Fax: +86-21-26647338/+86-21-26649633 Deadline for Regis tration: Oct. 31, 2010

The Fourth Baosteel Biennial Academic ConferenceNovember 16-18, 2010 Shanghai, China

ADVANCE REGISTRATION FORMPlease type or print in block letters and return this form to:

Baosteel BAC 2010 Conference SecretariatScience and Technology Association of Baosteel Group Corporation Room 106, Building 0, 889 Fujin Road, Baoshan District, Shanghai 201900, P.R. China

Fax: +86/21-26647738/+86-21-26649633 E-mail: [email protected]

Participant Name (Check one) Prof. Dr. Mr. Ms.

(Given Name) (Middle Name) (Family Name)

Affiliation

Organization

Mailing Address (Check one) Office Home

Street City

State/Province Country Postal code

Tel Fax

E-mail

Payment(Check the method and fill in the blanks as applicable)

Cash I will pay the cash during Conference Registration.

Bank Transfer I have remitted or will remit the registration fee on (date) by the name of (remitter) through (name of bank) to:

022595 Industrial and Commercial Bank of China Baoshan Sub-Branch Bank Address: 1701 Mudanjiang Road, Shanghai 201900, ChinaBeneficiary: BAOSTEEL GROUP BAO SHAN HOTEL Account No.: 1001259509003200111

Fax: +86-21-56698698 Deadline for Re servation: Oct. 31, 2010

The Fourth Baosteel Biennial Academic ConferenceNovember 16-18, 2010 Shanghai, China

Hotel Reservation Form

Please type or print in block letters and return this form by fax to:Baosteel Group Baoshan Hotel1813 Mudanjiang Road, Shanghai 201900, P. R. China

Fax: +86-21-56698698 Tel: +86-21-56698888*4999

I am a registered participant for the Conference, please reserve a room for me according to the following information.Room Rate: 640 RMB/night, including one breakfast

(Given Name) (Middle Name) (Family Name)

Affiliation

Organization

Address

Tel Fax E–mail

Arrival Date Departure Date Number of Night

Special Requests

Credit Card Number Expiry date

Credit Card Type

Signature by Date

Terms and conditions: The above quoted preferential room reservation is only intended for the registered participants of the

Conference from 12nd to 21st, November. After the reservation deadline, the Hotel accommodation will be subject to room availability and rate changes.

It is the responsibility of the participants to settle all the accommodation charges and relevant incidentals during staying in the hotel.

Counter signed by Baosteel Group Baoshan Hotel as Reservation Confirmation.

By on

Documents

First Circular / Call for Papers - eastday.comgov.eastday.com/down/others/11te1.doc · Web viewWebsite: Tel: +86-21-26649633 +86-21-56787845 Fax: +86-21-26647738 +86-21-26649633 Baosteel