Embed Size (px)
Citation preview
FireMaster® FastWrap® XL
Datasheet Code US: 7-14-236 MSDS Code US: 406
www.morganthermalceramics.com
02:2012 Page 1 of 8
© 2009 Morgan Thermal Ceramics, a business within the Morgan Ceramics Division of The Morgan Crucible Company plc
7-14-236_FMFWXL_0212_Layout 1 2/15/12 11:31 AM Page 1
www.morganthermalceramics.com
02:2012 Page 2 of 8
7-14-236_FMFWXL_0212_Layout 1 2/15/12 11:32 AM Page 2
FireMaster® FastWrap® XL
www.morganthermalceramics.com
02:2012 Page 3 of 8
7-14-236_FMFWXL_0212_Layout 1 2/15/12 11:32 AM Page 3
FireMaster® FastWrap® XL
www.morganthermalceramics.com
02:2012 Page 4 of 8
7-14-236_FMFWXL_0212_Layout 1 2/15/12 11:32 AM Page 4
FireMaster® FastWrap® XL
www.morganthermalceramics.com
02:2012 Page 5 of 8
1 or 2 Hour Shaft Alternative / Zero Clearance to Combustibles
Tight butt joints (ULC Grease Duct requires 3" (75) overlap)Min. 3" (75) overlap on perimeter and between adjacent blankets
Two Layers of XL Insulation for ASTM E2336 Grease Duct Enclosures per UL Listing G18
FIGURE 11
45
32 Steel banding minimum 1/2" (13) wide by 0.015" (0.4) thick.
Optional 6" XL collar
6" (155)
Checkerboard Wrap Option Telescope Wrap Option
21" (533) TYP.
Butt Joint Option
21" (533) TYP.
1 1/2" (38)
3" (75)
1 1/2" (38)
3" (75)
1 1/2" (38)
3" (75)
1 1/2" (38)
SINGLE LAYER INSTALLATION OPTIONS (HVAC Duct per UL Listing V19)
One Layer of XL Insulation for Air Ventilation Duct Enclosures per UL Listing V19
2
42
1
42
3
2
5
3
3
TWO LAYER INSTALLATION (Grease Duct per ASTM E2336 and UL Listing G18)
Butt Joint / Butt Joint Typical
Hangers - size dependent weight of assembly (see datasheet Section G)Trapeze Supports - size dependent on weight of assembly (see datasheet Section G)
67
Steel Rectangular or Round Duct (size, gage and construction dependent per Listed Design)8
1 1/2" (38)
6
7
8
1
2
3
7
8
6
60" (1500) TYP.1 1/2" (38)10 1/2" (267 )O.C.
7-14-236_FMFWXL_0212_Layout 1 2/15/12 11:32 AM Page 5
FireMaster® FastWrap® XL
www.morganthermalceramics.com
02:2012 Page 6 of 8
7-14-236_FMFWXL_0212_Layout 1 2/15/12 11:32 AM Page 6
FireMaster® FastWrap® XL
www.morganthermalceramics.com
02:2012 Page 7 of 8
7-14-236_FMFWXL_0212_Layout 1 2/15/12 11:32 AM Page 7
FireMaster® FastWrap® XL
www.morganthermalceramics.com
02:2012 Page 8 of 8
3/16" (5) thick x 2" (50) -3" (75) wide bar stock perforated 12" (305) o.c.
1 or 2 Hour Rated Concrete !oor, ceiling, or wall1
Steel banding min. 1/2" (13) wide by 0.015" (0.4) thick.
Concrete fastener system
7Banding clip8
8" (203) maximum Air Gap4
Duct (independently supported as required by code)65
23
2 and 3 Sided Wrap Detail for Attaching to Walls and/or Ceilings
3"
3"
FIGURE 4
Insulation layers as required by UL and ULC Listings (see datasheet Section 6)
3" 3"5 1 5
36
2
7
8
4
6
7
4
3
7-14-236_FMFWXL_0212_Layout 1 2/15/12 11:32 AM Page 8
