2
Recommended contact adhesive The adhesive used to apply the product should also have flame retardant properties. Technical Standards Fire Retardant Formiline meets the minimum requirements for this type of product according to the following standards: NEMA LD-3/85 ISO 4586 - ½ UL - 94 ASTM - E 662/92 NBR 9442/86 Cleaning and Conservation As it has a non-porous surface, it does not accumulate dirt, therefore making it difficult for fungi and bacteria to proliferate. It is very easy to conserve: just wipe down with a damp cloth soaked in a household cleaning product that does not contain solvents or any highly aggressive cleaning agents, such as scouring powder or an abrasive sponge. Wax and silicone should also not be used, as when these are applied to a Fire Retardant Formiline surface, they form a greasy film that makes it difficult to clean and spoils its appearance. ire Retardant Formiline is a high pressure decorative laminate made of a special chemical that slows down combustion and flame propagation, and if the product covers a sufficiently large area, it may even prevent fire from expanding or extinguish it. It is very often used on doors, fire protection doors, walls, partitions and elevator walls. It can also be used in the naval and automobile industries and in railroad carriages. Fire Retardant Formiline has dimensional stability , and is highly resistant to wear and impact. It is resistant to heat, staining and is anti-allergic. Properties Fire Retardant Formiline has dimensional stability, and is highly resistant to wear and impact. It is anti- allergic, resistant to heat, and to staining. It is made by impregnating successive la y ers of cellulosic materials (paper) with thermostable (melamine and phenolic) resins, to make a slurry which is then compressed using heat and high pressures. Applications Fire Retardant Formiline can be applied to doors, fire protection doors, walls, partitions and elevator walls. It can also be used in the naval and automobile industries and in railroad carriages. Base Materials The product can be applied to surfaces made of metal, cement, asbestos or other substrates with fire retarding properties. F Fire Retardant Formiline Safety against combustion All on the Chart All on the Chart Thicknesses Colors A vailable Ask for Formiline. The best laminate. Multidecor S. de R.L. de C.V. Cuadrante de San Francisco Núm. 14-1 Col. Cuadrante de San Francisco. C.P. 04320, México D.F. [email protected] (55) 5554 5858 / (55) 5544 3737 www.multidecor.com.mx

Fire Retardant Formiline Safety against combustion · Fire Retardant Formiline meets the minimum ... ASTM - E 662/92 NBR 9442/86 Cleaning and Conservation As it has a non-porous surface,

  • Upload
    lytuong

  • View
    214

  • Download
    0

Embed Size (px)

Citation preview

Recommended contact adhesiveThe adhesive used to apply the product should alsohave flame retardant properties.

Technical StandardsFire Retardant Formiline meets the minimumrequirements for this type of product according to thefollowing standards:

• • • • •

NEMA LD-3/85 ISO 4586 - ½ UL - 94ASTM - E 662/92 NBR 9442/86

Cleaning and ConservationAs it has a non-porous surface, it does not accumulate dirt, therefore making it difficult for fungi and bacteria to proliferate. It is very easy to conserve: just wipe down with a damp cloth soaked in a household cleaning product that does not contain solvents or any highly aggressive cleaning agents, such as scouring powder or an abrasive sponge. Wax and silicone should also not be used, as when these are applied to a Fire Retardant Formiline surface, they form a greasy film that makes it difficult to clean and spoils its appearance.

ire Retardant Formiline is a high pressure decorative laminate made of a special chemicalthat slows down combustion and flame propagation,and if the product covers a sufficiently large area, itmay even prevent fire from expanding or extinguishit. It is very often used on doors, fire protection doors,walls, partitions and elevator walls.It can also be used in the naval and automobileindustries and in railroad carriages. Fire RetardantFormiline has dimensional stability , and is highlyresistant to wear and impact. It is resistant to heat,staining and is anti-allergic.

PropertiesFire Retardant Formiline has dimensional stability,and is highly resistant to wear and impact. It is anti-allergic, resistant to heat, and to staining. It is madeby impregnating successive la y ers of cellulosicmaterials (paper) with thermostable (melamine andphenolic) resins, to make a slurry which is thencompressed using heat and high pressures.

ApplicationsFire Retardant Formiline can be applied to doors, fireprotection doors, walls, partitions and elevator walls.It can also be used in the naval and automobileindustries and in railroad carriages.

Base MaterialsThe product can be applied to surfaces made ofmetal, cement, asbestos or other substrates with fireretarding properties.

F

Fire Retardant FormilineSafety against combustion

All on the Chart All on the Chart

Thicknesses Colors A vailable

Ask for Formiline. The best laminate.

Multidecor S. de R.L. de C.V.Cuadrante de San Francisco Núm. 14-1

Col. Cuadrante de San Francisco. C.P. 04320, México [email protected] (55) 5554 5858 / (55) 5544 3737

www.multidecor.com.mx

Fire Retardant FormilineProperties, performance and applicable standards

High tem perature resistance

Stain Resistance

Wear Resistance NEMA LD-3ISO 4586-1 /2

3.0 16

ISO 4586-1 /2 15

8ISO 4586-1 /2A hot pan (at a standardized temperature)is placed on the laminate for 20 minutes.Then the damage caused is analyzed.

The laminate is subjected to attack by thechemical products defined in the Standard,for a standardized length of time.

Abrasion of the laminate with standardizedsandpaper until the decorative surface isworn.

Proper ties NotesStand ards Clauses

Impact resistance NEMA LD-3 3.3

ASTM E-662

NBR 9442

Determination of the specificoptical density of smoke

* As these data are complex, the values will be supplied when requested by the customer ** Tests carried out in an accredited laboratory

Determination of the flamepropagation index along thesurface

Material mee ts the values required byvarious segments (naval, automobile,civil)**

Material classified as Class A**

A sphere with a standardized mass isdropped from a minimum height that isalso standardized. The damage that thelaminate suffers is analyzed.

350

54

34

Values

508

X =12_

*

Cy cles _>

Appearance Gloss f inish Other f inishes _

_>

>

Appearance Group 1 + 2 _>Group 3 + 4 _>

Units

min

mm

Thickness (mm)_>0,8 - mm

Ask for Formiline. The best laminate.

Multidecor S. de R.L. de C.V.Cuadrante de San Francisco Núm. 14-1

Col. Cuadrante de San Francisco. C.P. 04320, México [email protected] (55) 5554 5858 / (55) 5544 3737

www.multidecor.com.mx