FINISHING MOWERS & TRI-DECKS

IMPECCABLE GROOMING. If a beautiful, smooth, contoured appearance is important, you want Bush Hog®. Our finishing mowers are ideal for contractors, government entities, lawncare professionals, contractors, property owners, and homeowners with large lawns. Everything about these machines is designed for performance. Floating A-frames, hitch arms, and clevis hitch follow ground contours and provide extra protection from obstacles. Offset wheels prevent tracking and soil compaction. Three overlapping blades produce a smooth, yard-like finish. Available in widths up to 90-inches, these mowers are built for low maintenance and years of trouble-free performance.

ATH SERIESAIR TUNNEL FINISHING MOWER

2 www.bushhog.com

BUSH HOG® Is Built TOUGH For Better Performance And Durability TOUGH Bush Hog® Gearboxes with tapered roller

bearings provide longer life and greater protection in tough mowing conditions. Gearboxes are built to exacting Bush Hog standards.

TOUGH A-Frames float from two different positions to follow ground contours and provide extra protection when riding over obstacles. Lower hitch arms float where they are attached to the frame and the clevis hitch floats where the tractor top link attaches.

TOUGH Axle Arms built for long life are equipped with offset wheels designed to prevent tracking and reduce soil compaction.

TOUGH Field Proven Spindle Assemblies provide years of maintenance-free service. Grease fittings are easily serviced through convenient openings in the shields.

TOUGH Aramid Cord Reinforced Belts with proven Bush Hog® design deliver better performance with less maintenance than competitive machines by using only one belt.

TOUGH Fabricated Decks deliver greater strength and rigidity in tough mowing conditions. The 7-gauge decks resist wear from air flow and sand that shortens life of standard decks. Leading edge is formed at a 90 degree angle to resist bending.

TOUGH Genuine Bush Hog® Blades are heat treated uplift blades that deliver a smooth cut and long life even in sandy conditions.

Create a manicured appearance even in thick, damp conditions• 90-inch cutting width

• For 35 to 55 HP tractors

• Designed for thick and damp conditions

• Curved left front deck edge with tight center baffle directs material into tunnel

• Tunnel easily accommodates large volume of clippings

• Parallel uplift blades lift grass for cleaner cut

• 7-gauge steel deck

• Deck reinforcement at each spindle assembly

• High blade tip speeds (15,621 FPM) force air and material into and through tunnel

• Blades overlap for quality appearance

• Spring-loaded idler is easy to adjust

• Easy cutting height adjustment from 1 to 6-inches in ½-inch increments

• Easy-lift tabs for quick lubrication of blade spindles

SPECIFICATIONSMODEL ATH-900

Cutting Width 90-inches

Cutting Height (1/2 inch increments) 1 to 6-inches

Tractor HP Range 35 - 55 PTO

Type Hitch Category I

Size Blades 1/4 x 3 x 31 1/2-inches

Number of Blades 3

Blade Tip Speed 15,621 FPM

Blade Overlap 2 1/4-inches

Blade Uplift Parallel

Driveline Size ASAE Cat. 3

Front Roller Size (optional) 3 x 13-inches

Discharge Right side

Deck Plate 7-gauge

Tire Size 13 x 5-inches

(solid tire)

Belt “C” size Aramid Cord

Gearbox 55 HP

Tractor PTO Speed 540 RPM

Belt Adjustment Spring Loaded Idler

Approx. Weight 1164-lbs.

Options Front Roller

Warranty1-year limited warranty with a 5-year gearbox

limited warranty

ATH SERIESAIR TUNNEL FINISHING MOWER

www.bushhog.com 3

Built To Last.

A CUT ABOVE THE REST. Available in cutting widths of 60, 72, and 84-inches, the RDTH Series is designed to deliver a smooth, even cut with the superior distribution of rear discharge. Floating top and lower links allow for a uniform cut on uneven terrain and high blade tip speeds prevent streaking. Cutting height is easily adjustable from 1 to 6-inches. The closed box design and heavy rear discharge chain shielding reduces potential damage from thrown rocks and other debris.

RDTH SERIESREAR DISCHARGE FINISHING MOWER

4 www.bushhog.com

Smooth, even cut with the superior distribution of rear discharge

TOUGH 60 to 84-inch cutting widths TOUGH for 15 to 55+ HP tractors TOUGH designed to deliver the quality distribution

of rear discharge TOUGH floating top and lower links for uniform cut

on uneven terrain TOUGH high (18,000 plus FPM) blade tip speed

prevents streaking TOUGH Bush Hog® field proven spindles

TOUGH Single Aramid Cord reinforced belt TOUGH easy-to-use grease zerk in caster stem TOUGH spring-loaded idler adjusts belt tension TOUGH rear chains standard on RDTH-60 and RDTH-72 TOUGH flared deck design on RDTH-84 TOUGH easy cutting height adjustment from 1 to 6-inches TOUGH 7-gauge steel deck

SPECIFICATIONS

MODEL RDTH-60 RDTH-72 RDTH-84

Cutting Width 60-inches 72-inches 84-inches

Cutting Height (1/2 inch increments)

1 1/2 to 6 1/2-inches 1 1/2 to 6 1/2-inches 1 1/2 to 5 1/2-inches

Tractor HP Range 15 - 35 PTO 20 - 40 PTO 30 - 55 PTO

Type Hitch Category I Category I Category I

Size Blades 1/4 x 2.5 x 21-inches 1/4 x 2.5 x 25-inches 5/16 x 2.5 x 29-inches

Number of Blades 3 3 3

Blade Tip Speed 18,231 FPM 18,272 FPM 18,475 FPM

Blade Overlap 1 1/2-inches 1 1/2-inches 1 1/2-inches

Blade Uplift Parallel Parallel Parallel

Driveline Size ASAE Category 3 ASAE Category 3 ASAE Category 3

Front Roller Size (optional) 3 x 5-inches 3 x 5-inches 3 x 13-inches

Discharge Rear Rear Rear

Deck Plate 7-gauge 7-gauge 7-gauge

Tire Size 3 1/4 x 10 1/4-inches 3 1/4 x 10 1/4-inches 4 x 10-inches

(solid tire) (solid tire) (solid tire)

Belt “B” size Aramid Cord “B” size Aramid Cord “B” size Aramid Cord

Gearbox 45 HP 45 HP 55 HP

Tractor PTO Speed 540 RPM 540 RPM 540 RPM

Belt Adjustment Spring Loaded Idler Spring Loaded Idler Spring Loaded Idler

Approx. Weight 536-lbs. 588-lbs. 874-lbs.

Options Front Roller Kit Front Roller Kit Front Roller Kit

Warranty 1-year limited warranty with a 5-year gearbox limited warranty

RDTH SERIESREAR DISCHARGE FINISHING MOWER

www.bushhog.com 5

Built To Last.

TD SERIES TRI-DECK FINISHING MOWERS

The Bush Hog® line of Tri-Deck Finishing Mowers are perfect wherever a well-groomed cut is needed. With available mowing widths of 11, 15 and 17-feet, there is certain to be a size to fit your needs. Power requirements start at only 30 HP for the TD1100 and range up to 45 HP for the TD1700. Chances are you already have a tractor that is compatible with at least one of these mowers.

The entire TD line is well suited for golf courses, municipalities, sporting complexes, and homeowers with large acreages.

The high blade tip speed and 6-inches deck overlap assures a uniform cut with no streaking. Built “Bush Hog Tough,” this line is designed to withstand thousands of hours of use with minimal downtime.

With a choice of three models, the TD Series meets your expectations of quality mowers from “The Factory Where Legends Are Built.”

6 www.bushhog.com

The adjustable clevis hitch, along with the standard tongue jack, allows one person to attach mower to the tractor. The safety tow chain is standard equipment.

The 3 x 5-inches anti-scalp front roller is standard equipment for all decks.

SPECIFICATIONS TD1100 TD1500 TD1700

Cutting Width 11-feet 15-feet 17-feet

Cutting Height 3/4-inch to 4 1/4-inches 1 1/2-inches to 4 1/2-inches 1 1/2-inches to 4 1/2-inches

Deck Widths (3) 48-inches decks (1) 72-inches deck, (2) 60-inches decks (3) 72-inches decks

Deck Construction 7-gauge 7-gauge 7-gauge

Deck Overlap 6-inches 6-inches 6-inches

Blade Overlap 1 1/2-inches 1 1/2-inches 1 1/2-inches

Material Discharge Rear Rear Rear

Rear Chains Standard equipment Standard equipment Standard equipment

Belts Single Aramid Cord “B” section per deck

Single Aramid Cord “B” section per deck

Single Aramid Cord “B” section per deck

Gauge Wheels (12) 11-inches x 4-inches pneumatic w/roller bearings

(12) 13-inches x 5-inches x 6-inches pneumatic w/roller bearings

(12) 13-inches x 5-inches x 6-inches pneumatic w/roller bearings

Tractor HP Required* 30 HP minimum 40 HP minimum 45 HP minimum

Gearbox RPM 540 540 540

Spindle RPMs 4150 3316 (60-inches), 2792 (72-inches) 2792

Transport Dimensions 78-inches wide, 75-inches high, 146-inches long

95-1/2-inches wide, 95-1/2-inches high, 166" long

95-1/2-inches wide, 107-1/2-inches high, 166-inches long

Trans. Tires (w/taper. roll.bearings)

(2) 23-inches x 9-1/2-inches x 12-inches

(2) 23-inches x 9-1/2-inches x 12-inches

(2) 23-inches x 9-1/2-inches x 12-inches

Wing Flex 30° up and 10° down 30° up and 10° down 30° up and 10° down

Hitch Pull type/clevis, 3 position adjustable

Pull type/clevis, 3 position adjustable

Pull type/clevis, 3 position adjustable

Driveline Size Cat IV 80° CV (main), Cat. III wing

Cat IV 80° CV (main), Cat. III wing

Cat IV 80° CV (main), Cat. III wing

Wing Deck Flex (ind. of wing frame)

10° side to side, 10° front to rear

10° side to side, 10° front to rear

10° side to side, 10° front to rear

Belt Adjustment Spring loaded idler Spring loaded idler Spring loaded idler

Blade Tip Speed 18,468 FPM 18,231 (60-inches), 18,272 (72-inches) FPM 18,272 FPM

Parking Jack Standard Standard Standard* HORSEPOWER SUBJECT TO CHANGE DUE TO MOWING CONDITIONS SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE

Streamlined deck design Reinforced mainframe

construction Independent deck flotation Heavy duty Aramid Cord

belting Large transport wheels for

better flotation and stability Deck Gearbox – 45 HP

Heavy duty divider gearbox Economical pricing, choice

of widths Adjustable clevis hitch Greaseable blade spindles Standard front anti-scalp

rollers Narrow transport width

www.bushhog.com 7

Built To Last.

Bush Hog® TOUGH Features for Sod Farms, Golf Courses, Parks, Recreation Areas...

2501 Griffin Ave.Selma, Alabama 36703

Tel: (800) 363-6096Fax: (334) 874-2701

www.bushhog.com

Bush Hog and (hog icon) are registered trademarks of Alamo Group, Inc. Copyright © 2015

in Selma Alabama

Made BUSHHOG