3rd Intl. Conf. on Structure, Processing and Properties of Materials, SPPM2010 24-26 February 2010, Dhaka Sheraton Hotel and BUET, Dhaka

SPPM2010: The Programme | Page 1

Programme Summary

23 February 2010, Tuesday, Department of MME, BUET

03:00 – 06:00 Early registration

24 February 2010, Wednesday, Dhaka Sheraton Hotel

08:00 – 09:30 Late registration

10:00 – 11:00 Inaugural Ceremony

11:00 – 11:30 Tea/Coffee Break

11:30 – 01:30 Plenary session 1 Venue: Grand Ball Room

01:30 – 02:30 Lunch Break

02:30 – 04:30 Technical session 1A: Polymers & Composites Venue: Shimul

Technical session 1B: Magnetic, Optical & Semiconducting Materials Venue: Palash

Technical session 1C: Nanomaterials & Thin FilmsVenue: Chameli

04:30 – 05:00 Tea/Coffee Break

05:00 – 10:00 Dinner and Cultural Function Venue: Lalbagh Fort, Dhaka

25 February 2010, Thursday, BUET

09:00 – 11:00 Plenary session 2 Venue: IICT Seminar Room (1st Floor, Civil Engineering Building)

11:00 – 11:30 Tea/Coffee Break

11:30 – 01:30 Technical session 2A: Polymers & Composites Venue: IICT Seminar Room

Technical session 2B: Magnetic, Optical & Semiconducting Materials Venue: OAB Room 233

Technical session 2C: Structure & CharacterisationVenue: MME Library, OAB

01:30 – 02:30 Lunch Break

02:30 – 04:30 Technical session 3A: Polymers & Composites Venue: IICT Seminar Room

Technical session 3B: Shaping & Fabrication Venue: OAB Room 233

Technical session 3C: Fatigue, Fracture & Performance Venue: MME Library, OAB

04:30 – 05:00 Tea/Coffee Break

05:00 – 07:00 Technical session 4A: Tribology, Corrosion & Surface Engineering Venue: IICT Seminar Room

Technical session 4B: Miscellaneous Venue: OAB Room 233

Technical session 4C: Ceramics & Biomaterials Venue: MME Library, OAB

08:00 – 11:00 Dinner

26 February 2010, Friday, BUET

09:00 – 11:00 Plenary session 3 Venue: IICT Seminar Room

11:00 – 11:30 Tea/Coffee Break

11:30 – 12:30 Concluding ceremony Venue: IICT Seminar Room

12:30 – 08:00 Excursion / Industry visit

3rd Intl. Conf. on Structure, Processing and Properties of Materials, SPPM2010 24-26 February 2010, Dhaka Sheraton Hotel and BUET, Dhaka

SPPM2010: The Programme | Page 2

Inaugural Ceremony

24 February 2010, Wednesday, Dhaka Sheraton Hotel, 10:00 am – 11:00 am

09:50 am Guests take their seats

10:00 am Recitation from the Holy Quran

10:05 am Welcome address by the Conference Chair Prof. Dr. Md. Mohar Ali Department of Materials and Metallurgical Engineering, BUET

10:10 am Speech by representative of overseas authors Prof. Dr. John Campbell University of Birmingham, United Kingdom

10:15 am Speech by the Guest of Honour Prof. Dr. M. Habibur Rahman Pro-Vice Chancellor of BUET

10:20 am Speech by the Special Guest Prof. Dr. A. M. M. Safiullah Vice-Chancellor of BUET

10:30 am Speech by the Chairman of Inaugural Ceremony Prof. Dr. Qumrul Ahsan Head, Department of Materials and Metallurgical Engineering, BUET

10:40 am Speech by the Chief Guest Architect Yeafesh Osman Honourable State Minister, Ministry of Science and Information & Communication Technology , Government of the Peoples’ Republic of Bangladesh

10:55 am Vote of thanks by the Conference Secretary Prof. Dr. A. K. M. Bazlur Rashid Department of Materials and Metallurgical Engineering, BUET

11:00 am Refreshment

3rd Intl. Conf. on Structure, Processing and Properties of Materials, SPPM2010 24-26 February 2010, Dhaka Sheraton Hotel and BUET, Dhaka

SPPM2010: The Programme | Page 3

Technical Sessions Details Plenary Session 1 24 February 2010, Wednesday, 11:30 am – 01:30 pm Venue – Grand Ball Room, Dhaka Sheraton Hotel Chair: Prof. Dr. E. Haque, Member, University Grants Commission, Bangladesh IS02 Nanoparticle Magic with Magnesium M. Gupta, Q. B. Nguyen, K. S. Tun and M. Paramsothy IS07 Polymer Matrix Composite I. Verpoest

3rd Intl. Conf. on Structure, Processing and Properties of Materials, SPPM2010 24-26 February 2010, Dhaka Sheraton Hotel and BUET, Dhaka

SPPM2010: The Programme | Page 4

Technical Sessions Details Technical Session 1A: Polymers and composites 24 February 2010, Wednesday, 02:30 pm – 04:30 pm Venue – Shimul, Dhaka Sheraton Hotel Chair: Prof. Dr. I. Verpoest, Katholieke Universiteit Leuven, Belgium E07 DSC and TGA analysis of Selective Tropical Wood Polymer Composites (WPC) S. Hamdan, M. R. Rahman, A. A. Saleh, M. S. Islam and M. A. Mun’aim E29 Characterization and Biomedical Application of a Wound Dressing Material based on Gelatin M. A. Khan, J. M. M. Islam, N. Rahman and M. Z. I Mollah E13 Studies on Development of Polymer-Matrix Composites for Structural Uses M. M. Rahman, M. A. Islam and M. Ahmed E27 Simulating Weathering and Soil Degradation Study on Natural Fiber (Banana, Betel nut and Rice straw) Polypropylene Composite M. M. Hassan, A. Karim, J. Chakrabarty, N. K. Roy, H. U. Zaman and M. A. Khan E03 Effect of Moisture on the Mechanical Behaviour of Woven Jute Fabric Reinforced Polymer Composites S. Biswas, R. Hossain, Q. Ahsan, M. Hasan, A. V. Vuure and I. Verpoest E10 X – ray Irradiation of CR – 39 Polymer M. A. Malek and C. S. Chong E12 Comparative Studies on the Mechanical and Thermal Properties of Jute Reinforced Polyethylene Terephthalate (PET) Based and Radiation Grafted PET Based Composites N. Noor, M. A. Khan, R. A. Khan, M. Saha and M. A. Gafur E17 Characterization of uPVC Pipes M. M. Billah, A. A. Sharif, T. Rahman, R. Qadir, U. K. Sultana and Q. Ahsan E22 Manufacturing and Structural Characterization of Natural Fiber Reinforced Polymeric (NFRP) Laminates N. Uddin, R. R. Kalyankar and M. A. Khan E25 Modification of Natural Fiber and its Effect on the Mechanical Properties of Polymer Composites S. Dey and Q. Ahsan

3rd Intl. Conf. on Structure, Processing and Properties of Materials, SPPM2010 24-26 February 2010, Dhaka Sheraton Hotel and BUET, Dhaka

SPPM2010: The Programme | Page 5

Technical Sessions Details Technical Session 1B: Magnetic, optical and semiconducting materials 24 February 2010, Thursday, 02:30 pm – 04:30 pm Venue – Palash, Dhaka Sheraton Hotel Chair: Dr. M. A. Hakim, Materials Science Division, Atomic Energy Centre, BAEC, Dhaka FKS01 KEYNOTE LECTURE Synthesis, Characterisation and Properties of Advanced Nanomaterials M. A. Hakim F01 Optical Properties Study of KFe(CN)6 Organic Material M. J. Ferdous, D. K. Saha, Z. H. Mahmood and M. Zaman F05 Magnetization, Magnetoresistance and Hall Resistivity of (Fe100-xVx)75 P15C10 Amorphous Ribbons M. A. S. Karal, M. G. M. Hossain, M. Kamruzzaman, H. M. I. Jaim and F. A. Khan F13 Study of Exchange Interactions between Amorphous/Nanocrystalline Phases in Fe74Cu0.8Nb2.7Si15.5B7 at Different Stages of Crystallization S. M. Hoque, U. Sridhar, M. A. Hakim and D. K. Saha F17 Magnetic Properties and Magnetocaloric Effect in La0.7(Ca1-xBax)0.3MnO3 Perovskites M. S. Islam, M. Hudl, M. A. Hakim, F. A. Khan, D. L. Minh, N. Chau and P. Nordblad F22 Model for Fluorine Redistribution after Post-Implantation Annealing M. Q. Huda, S. U. Omar, A. A. I. Ahmed, M. S. Mahmood and F. M. Mohammedy F19 Magnetization Behavior and Magnetic Ordering in Co1-xCdxFe2O4 Ferrites S. Noor, M. A. Hakim, S. S. Sikder, S. Akhter and P. Nordblad

3rd Intl. Conf. on Structure, Processing and Properties of Materials, SPPM2010 24-26 February 2010, Dhaka Sheraton Hotel and BUET, Dhaka

SPPM2010: The Programme | Page 6

Technical Sessions Details Technical Session 1C: Nanomaterials and thin film 24 February 2010, Wednesday, 02:30 pm – 04:30 pm Venue – Chameli, Dhaka Sheraton Hotel Chair: Prof. Dr. M. Gupta, Dept. of Mechanical Eng., National University of Singapore, Singapore F02 Device Aspects of Silicon Laser Around 1.54µm Exploiting Erbium Doped Silicon Nanocrystals Material M. T. Hasan, M. Tanzid, S. Saha, M. S. Akter, M. Q. Huda and F. M. Mohammedy F03 Ultra Smooth Nanostructured Diamond Coatings Deposited by Microwave Plasma Chemical Vapor Deposition for Biomedical Implants in Total Hip Replacement Applications S. Chowdhury and Y. K. Vohra F07 Synthesis of TiO2 Nanowires by Oxidation Annealing S. S. Amin and T. T. Xu F09 On the Synthesis of MAX-phase Titanium silicon carbide (Ti3SiC2) Nanopowder N. Fatima F10 Development of Nano-Dispersed Amorphous Aluminium –Alloys I. Manna F12 Enhanced thermoelectric properties in PbTe nanocomposites B. Paul and P. Banerji F15 Synthesis of c-Axis Oriented AlN Films for the Fabrication of Micro/Nanostructures G. Bose, J. P. Kar and S. Tuli F20 Microwave Assisted Synthesis of Ag on MWCNTs and Fabrication of Their Polymer Nanocomposites S. Dey, V. K. Rangari and S. Jeelani G08 Influence of Substrate Temperature on the Electrical and Optical Properties of Vacuum Evaporated ZnO Thin Films J. Begum, T. Begum, N. Akhtar, J. Parvin and S. M. F. Hasan F24 Determination of the Diameter of Single Wall Carbon Nanotube from Raman G Peak Analysis M. Rahman, R. Parvez, A. A. Chowdhury and S. M. Mominuzzaman

3rd Intl. Conf. on Structure, Processing and Properties of Materials, SPPM2010 24-26 February 2010, Dhaka Sheraton Hotel and BUET, Dhaka

SPPM2010: The Programme | Page 7

Technical Sessions Details Plenary Session 2 25 February 2010, Thursday, 09:00 am – 11:00 am Venue – IICT Seminar Room, Civil Engineering Building (1st Floor), BUET Chair: Prof. Dr. A. S. M. A. Haseeb, Department of Mechanical Eng., University of Malaya, Malaysia IS01 A Metallurgical Revolution? J. Campbell IS03 Remaining Life Management of High Temperature Equipment, Used Catalyst Tube in Fertilizer Plant T. Shibasaki IS04 Phase Transitions in RE-doped BiFeO3 I. M. Reaney, S. Karimi, J. Pokorny, I. Sterianou, Y. Han, I. Levin, V. Provenzano, C. Denis and H. Wu

3rd Intl. Conf. on Structure, Processing and Properties of Materials, SPPM2010 24-26 February 2010, Dhaka Sheraton Hotel and BUET, Dhaka

SPPM2010: The Programme | Page 8

Technical Sessions Details Technical Session 2A: Polymers and composites 25 February 2010, Thursday, 11:30 am – 01:30 pm Venue – IICT Seminar Room, Civil Engineering Building (1st Floor), BUET Chair: Prof. Dr. Q. Ahsan, Head, Department of MME, BUET E09 Physico-Mechanical Properties of Tropical Wood-Polymer Composites (WPC) S. Hamdan, M. S. Islam, M. R. Rahman, I. Jusoh and M. M. Idrus E01 Study of Jute MAPP Composite Strength Relative to Processing Route M. R. Hossain, S. Biswas, Q. Ahsan, A. V. Vuure and I. Verpoest E26 Preparation and Characterization of Gelatin PVA Bio-blend and Curing with Gamma Radiation M. Z. I. Mollah, N. Rahman, M. A. Khan and R. A. Khan E28 Mechanical and Water Aging Properties of Gelatin-Glucose and Gelatin-Urea films: Effect of Gamma Radiation N. Rahman, M. A. Khan, R.A. Khan, M. Z. I. Mollah and T. A. Chowdhury E04 Study on Tensile and Impact Properties of Woven Jute Fabric Reinforced Polymer Composites S. Biswas, M. R. Hossain, Q. Ahsan, M. Hasan, A. V. Vuure and I. Verpoest E05 Physical and Tensile Properties of Raw and Treated Silk Fibers M. S. Islam, Q. Ahsan and M. Hasan E14 Significance of Cluster Less Homogeneous Distribution of Inorganic Nanoparticles in Epoxy Adhesives P. K. Ghosh, S. Halder and M. S. Goyat E18 Effects of Strength of Wood Fibres on the Behaviours of Wood Dust Reinforced Polymer Matrix Composites M. R. Qadir and M. A. Islam E23 Structural Characterization of Natural Fiber Reinforced Polymeric Structural Insulated Panels (NSIPs) for Panelized Construction N. Uddin and R. R. Kalyankar E24 Physico-Mechanical Properties of Jute Mat Reinforced Epoxy Composites S. M. Sadaf, M. Siddik, Q. Ahsan and M. Hasan E30 Physical and Mechanical Characterization of Bagasse Single Fiber M. F. Rahman, R. Karim, M. Hasan and Q. Ahsan

3rd Intl. Conf. on Structure, Processing and Properties of Materials, SPPM2010 24-26 February 2010, Dhaka Sheraton Hotel and BUET, Dhaka

SPPM2010: The Programme | Page 9

Technical Sessions Details Technical Session 2B: Magnetic, optical and semiconducting materials 25 February 2010, Thursday, 11:30 am – 01:30 pm Venue – Room No. 233 (Metallography Laboratory), Old Academic Building, BUET Chair: Prof. Dr. J. Poddar, Department of Physics, BUET F23 Novel electrical Properties of Hydroxyapatite S. A. M. Tofail F04 Electrical, Magnetic and Thermal Properties of (Fe1-xMnx)75P15C10 M. Kamruzzaman, H. M. I. Jaim, M. A. S. Karal and F. A. Khan F06 Study of the Transport Properties of copper substituted lithium ferrite M. S. Ullah, F. A. Khan, S. M. Hoque and M. A. Hakim F08 The Effect of Cu on the Structural, Electrical and Magnetic Properties of Ni-Zn Ferrites Saiduzzaman, M. A. Hossain, M. A. Hakim and D. K. Saha F14 Structure, Microstructure and Transport Properties of Li-Cd Ferrites S. Akhter, D. P. Paul, M. A. Hakim and S. M. Hoque F21 Thiophene Based Low-Band Gap Conjugated Polymer Solar Cells: A review A . A . Amin, M. M. Islam and R. K. Saha F11 Topography and Morphology Effects on Diamond-Like Carbon Thin Film Semiconductor K. M. A. Hussain, J. L. Sullivan, J. Podder and S. K. Biswas F16 Structural and Optical Characterization of MnS Thin Film Deposited by Spray Pyrolysis Technique for Optoelectronic Applications M. R. I. Chowdhury, J. Podder and D. K. Saha

3rd Intl. Conf. on Structure, Processing and Properties of Materials, SPPM2010 24-26 February 2010, Dhaka Sheraton Hotel and BUET, Dhaka

SPPM2010: The Programme | Page 10

Technical Sessions Details Technical Session 2C: Structure and characterisation 25 February 2010, Thursday, 11:30 am – 01:30 pm Venue – Professor Ibrahim Library, Department of MME, Old Academic Building, BUET Chair: Prof. M. M. A. Bepari, Department of MME, BUET B04 Martensitic Transformation in NiTiNOL J. A. Butler, A. Gandhi, P. Tiernan, M. Gregor, T. McGloughlin and S. A. M. Tofail C01 Nb-based Hydrogen Permeable Alloys with High Hydrogen Permeability and Strong Resistance to Hydrogen Embrittlement H. Yukawa, M. Morinaga, T. Nambu and Y. Matsumoto C05 Development of New Duplex Stainless Steel DP28WTM for Corrosion Prevention and Strategic Maintenance in Urea Plants D. Ishikawa and E. Nagashima C08 Interface Microstructure and Strength Properties of Titanium|Ni|Stainless Steel diffusion Bonded Joints S. Kundu and S. Chatterjee C14 Structural Studies of Mixed Micelles using Small Angle Neutron Scattering Studies I. Kamal, F. U. Ahmed, P. S. Goyal and G .U. Ahmad C06 Magnetic Properties Measurement of Grain-oriented and Non-oriented Silicon Iron for Different Core Arrangement A. H. Jahidin, M. S. A. M. Ali and M. H. MatSom H1 Material Selection Methods in Design of Bicycle Frame System M. A. Maleque and S. Dyuti

3rd Intl. Conf. on Structure, Processing and Properties of Materials, SPPM2010 24-26 February 2010, Dhaka Sheraton Hotel and BUET, Dhaka

SPPM2010: The Programme | Page 11

Technical Sessions Details Technical Session 3A: Polymers and composites 25 February 2010, Thursday, 02:30 pm – 04:30 pm Venue – IICT Seminar Room, Civil Engineering Building (1st Floor), BUET Chair: Dr. M. A. Khan, Nuclear and Radiation Chemistry Division, INST, BAEC, Bangladesh E16 Modification and Characterization of LDH for High Performance Polymeric Nanocomposites S. Kumar and C. K. Das E11 Effect of Rubber Content on Mechanical Properties and Degradation Nature of Jute Reinforced Polypropylene/Natural Rubber Based Composite M. M. Rahman, M. E. Haque, R. A. Khan, D. Huq and M. A. Gafur E19 Microstructure and Thermal Conductivity of Micron Size Particle Reinforced Polymer Matrix Composites N. Tamanna and M. A. Islam E02 Study on Jute Epoxy Composite Properties Made by Vacuum Assisted Resin Infiltration (VARI) Technique M. R. Hossain, S. Biswas, Q. Ahsan, A. V. Vuure and I. Verpoest E06 Fabrication and Characterization of Silk Fiber UD Composites M. S. Islam, Q. Ahsan and M. Hasan E08 Physico-Mechanical Properties of Chemically Treated Rick Husk Reinforced Polyethylene Composites M. R. Rahman, M. N. Islam, M. M. Huque and M. Hasan E15 The Effect of Underwater Explosion Shock Loading on the Properties of FRP Laminates G. M. S. Rahman and S. Itoh E20 Fibre Reinforced Polymers for Structural Rehabilitation S. Nasrin, M.Begum and P. Sarker E21 Physical and Mechanical Performance of Selective Tropical Liquefied Wood Polymer Composites (TLWPC) S. Hamdan, M. A. M. M. Idrus. D. M. A. Hashim, M.R Rahman and M. S. Islam E31 Coir Fibre as a Reinforcing Element: A Review M. M. Hasan, S. Ahmed and A. Sharif E32 Characterisation of CuSO4 (Rot Proof) Treated Jute Fibre S. Shahinur, Q. Ahsan, M. Hasan, and S. Jafrin

3rd Intl. Conf. on Structure, Processing and Properties of Materials, SPPM2010 24-26 February 2010, Dhaka Sheraton Hotel and BUET, Dhaka

SPPM2010: The Programme | Page 12

Technical Sessions Details Technical Session 3B: Shaping and fabrication 25 February 2010, Wednesday, 02:30 pm – 04:30 pm Venue – Room No. 233 (Metallography Laboratory), Old Academic Building, BUET Chair: Prof. Dr. J. Campbell, Birmingham University, UK A09 Effect of Nickel Addition on Structure and Tribological Properties of Al-Si-Fe Cast Alloys M. N. Hasan, U. K. Sultana, K. M. Shorowordi and A. S. W. Kurny A02 Simulation of Concurrent Melting and Freezing Behaviour of Molten Metal M. M. Rahman, M. Q. Huda, K. Morita, K. Fukuda, and W. Maschek A04 Processing, Structure, Mechanical and Tribological Properties of SiC reinforced ZA27 Metal Matrix Composites S. Dutta, M. A. Salehin, A. F. Tarafder and M. N. Haque A05 Application of Taguchi Method to Investigate Casting Reliability A. Hossain and A. K. M. B. Rashid A06 Simulation of Casting Solidification and Its Verification on Structure and Property of Gray Cast Iron S. K. Shaha, M. M. Haque and M. Hasan A07 Effect of Process Parameter on the Structure and Properties of Fe-C-Al Alloy System Ductile Cast Iron S. K. Shaha, M. M. Haque and M. Hasan A10 Wear Behaviour of Nodular Cast Iron M. A. Islam and T. Karmokar A08 A Study on the Effects of Nickel Addition on the Microstructures and Wear Properties of Aluminium-Silicon Cast Alloy Containing Iron U. K. Sultana and A. S. W. Kurny A11 Development of Grinding Media Balls using Locally Available Materials T. Rahman, A. Sharif and K. M. Shorowordi A03 Effect of Foam Density and Slurry Viscosity of Al-Si LM6 Alloy (LFAC) on Casting Integrity and Surface Roughness M. Karimian, A. Ourdjini and M. H. bin H. Idris

3rd Intl. Conf. on Structure, Processing and Properties of Materials, SPPM2010 24-26 February 2010, Dhaka Sheraton Hotel and BUET, Dhaka

SPPM2010: The Programme | Page 13

Technical Sessions Details Technical Session 3C: Fatigue, fracture and performance 25 February 2010, Thursday, 02:30 pm – 04:30 pm Venue – Professor Ibrahim Library, Department of MME, Old Academic Building, BUET Chair: Dr. T. Shibasaki, Materials and Diagnosis Unit, Chiyoda Advanced Solutions Corporation, Japan CKS02 KEYNOTE PAPER Cyclic Fracture Toughness and Associated Fracture Micro-Mechanisms for Structural Materials K. K. Ray and H. Roy B01 Improving the Performance of Sn-Zn Lead-Free Solder with Ag Micro-Particle Reinforcements M. Ahmed and A. Sharif B02 3D Finite Element Analyses to Study the Effects of Thickness on the Fracture Parameters B. N. Hamid B03 In-situ Measurement of Fatigue Crack during Plane Bending Fatigue Test without Any Additional Set-up T. Nemoto, M. A. Islam and Y. Tomota C04 Microstructural and Substructural Variations during Symmetric and Asymmetric Cyclic Loading of AISI 304LN Stainless Steel K. Dutta, S. Sivaprasad, S. Tarafder and K. K. Ray C07 Four-Stage Piecewise Continuous Stress-Strain Model for AISI-321 Grade Steel B. N. Hamid C09 Investigation of Effects of Phosphorus on Fatigue Life Carbon steels M. A. Islam and Y. Tomota

3rd Intl. Conf. on Structure, Processing and Properties of Materials, SPPM2010 24-26 February 2010, Dhaka Sheraton Hotel and BUET, Dhaka

SPPM2010: The Programme | Page 14

Technical Sessions Details Technical Session 4A: Tribology, corrosion and surface engineering 25 February 2010, Thursday, 05:00 pm – 07:00 pm Venue – IICT Seminar Room, Civil Engineering Building (1st Floor), BUET Chair: Prof. M. A. R. Sarker, Dean, Mechanical Engineering Faculty, BUET, Bangladesh G02 Improvement of Tribological Properties of Die Steel by Sub-Zero Treatments D. Das, A. K. Dutta and K. K. Ray G12 Effect of Nickel Content of Wear Properties of the Heat Treated Cr Steel S. T. Hossain, M. M. A. Bepari and K. M. Shorowordi G01 Investigation of the Hertzian Contact Theory and Adhesion Forces for Spherical Particles with Molecular Dynamics Simulation and Atomic Force Microscopy experiments S. Sen and P. Armstrong G03 Effect of Sliding Velocity and Relative Humidity on Friction Coefficient of Copper M. A. Chowdhury, D. M. Nuruzzaman and M. L. Rahaman G05 Corrosion Inhibition of Mild Steel by Sodium Nitrite in Simulated Cooling Water S. Karim, C. M. Mustafa, Assaduzzaman and M. Islam G13 Tool Wear Prediction in Machining Steel under MQL Condition using Response Surface Methodology and Adaptive Neuro Fuzzy Inference System (ANFIS) A. A. Mamun, S. M. Ali and N. R. Dhar G11 Effect of Time and Temperature on Aluminisation of Steel M. M. H. Khan, Q. Ahsan and M. Hasan G10 Characterization of Zinc Anodizing on Galvanized Steel at Low Voltage Using Direct Current M. A. Mamun, M. Moniruzzaman and K. M. Shorowordi G06 Effect of Chloride Ions on the Passive Film of AISI-304L Austenitic Stainless Steel in Acidic Aqueous Media Assaduzzaman, C. M. Mustafa and M. Islam G09 Hard Layer Formation on Steel Surfaces by Powder Preplacement and TIG Torch Melting Techniques S. Dyuti and S. Mridha

3rd Intl. Conf. on Structure, Processing and Properties of Materials, SPPM2010 24-26 February 2010, Dhaka Sheraton Hotel and BUET, Dhaka

SPPM2010: The Programme | Page 15

G04 Simulation of Plasma Power Deposition in RF Plasma System M. K. Islam and H. Shahina G07 Development of Compositionally Graded Component by Direct Laser Cladding J. D. Majumdar G14 Experimental and Statistical Analysis of Tool Wear and Surface Roughness in Turning Different Steels by Carbide Insert under Cryogenic Cooling Condition I. Sultana, P. B. Zaman, N. T. Chowdhury, and N. R. Dhar G15 Chip Formation and Tool Performance in Machining Medium Carbon Steel under Minimum Quantity Lubricant (MQL) Condition S. M. A. Chowdhury, N. R. Dhar and M. M. A. Bepari

3rd Intl. Conf. on Structure, Processing and Properties of Materials, SPPM2010 24-26 February 2010, Dhaka Sheraton Hotel and BUET, Dhaka

SPPM2010: The Programme | Page 16

Technical Sessions Details Technical Session 4B: Miscellaneous 25 February 2010, Thursday, 05:00 pm – 07:00 pm Venue – Room No. 233 (Metallography Laboratory), Old Academic Building, BUET Chair: Prof. Dr. M. K. Banerjee, Director, Birla Institute of Technology, Jharkhand, India CKS01 KEYNOTE PAPER The Development of High Strength Steel in Global Scenario and in Particular Indian Scenario S. Chatterjee C03 Superiority of East Indian Wrought Irons in Modern Perspective B. Mandal, A. Bhattacharyya, P. K. Chattopadhyay and P. K. Datta C10 Various Routes for Production of High Strength Structural Steels-A Review M. A. Islam C02 Effect of Process Variables on Reduction Kinetics of Beach Sand Magnetite by Boropukuria Coal M. H. Khan, N. C. Das and M. R. Haque C11 Purification of Lead Recovered from Spent Automobile Lead-Acid Batteries M. A. Islam and A. S. W. Kurny C12 Disposal of Spent Catalyst of Urea Fertilizer Plants in Bangladesh A. S. W. Kurny and S. Ahmed C13 Systems Dynamics Modelling of Pollution Emission by Road Transport Sector in Bangladesh M. A. Nur and S. Paul H2 Elimination of As (III) from Aqueous Solution using Multi-Component Oxide (Al2O3-Fe2O3-ZnO) Surface S. A. Monim, M. A. Subhan, M. B. R. Bhuiyan, A. N. Chowdhury, M. Islam and M. A. Hoque H5 Comparison of the Conventional and UV Irradiation Techniques of Textile Wastewater Treatment on the Context of Bangladesh M. H. Shoikat, M. A. Khan, R. A. Khan, S. Islam and S. U. Ahammed H3 Synthesis and Characterization of Fe-Zn Mixed Oxide Adsorbent for Removal of As (III) from Water S. A. Monim, M. A. Subhan, M. B. R. Bhuiyan, A. N. Chowdhury, M. Islam and M. A. Hoque

3rd Intl. Conf. on Structure, Processing and Properties of Materials, SPPM2010 24-26 February 2010, Dhaka Sheraton Hotel and BUET, Dhaka

SPPM2010: The Programme | Page 17

H4 Selection of Appropriate Materials and Processes in Constructing and Manufacturing Engineering Items With Reference to The Holy Book M. M. Haque H6 Characterisation of Incinerated Bottom Ash of Municipal Solid Waste of Dhaka M. O. Haque, M. A. A. Sharif and A. Sharif H7 Optimisation of Leaching of Zinc Dross in Sulphuric Acid Solutions S. Ahmad and A. S. W. Kurny H8 Optimisation of Hydraulic Autofrettage in Strain Hardened Pressure Vessels Based on Elasto-Plastic Approach T. E. Alam, N. C. Ghosh and A. R. M. Ali

3rd Intl. Conf. on Structure, Processing and Properties of Materials, SPPM2010 24-26 February 2010, Dhaka Sheraton Hotel and BUET, Dhaka

SPPM2010: The Programme | Page 18

Technical Sessions Details Technical Session 4C: Ceramics and biomaterials 25 February 2010, Thursday, 05:00 pm – 07:00 pm Venue – Professor Ibrahim Library, Department of MME, Old Academic Building, BUET Chair: Prof. Ian M. Reaney, University of Sheffield, UK F18 Fabrication of Biomaterials using a Sprak Plasma Sintering Process: NiTi (Nitinol) and Hydroxyapatite A. A. Gandhi, I. Butler, K. Mcnamara and S. A. M. Tofail D01 A Comparison Characteristics of Silica Based Optical Fiber Materials for Low Loss Transmission M. S. Ali and M. J. Ferdous D03 Effect of Porosity on Thermal Conductivity of Fireclay Refractories M. Rahman, S. Biswas and M. R. Haque D04 The Effect of Sintering Temperatures and Time on Structure and Density of Barium Titanate Based Nanoceramics M. M. Billah, M. S. Hossain and M. F. Islam D08 Dielectric Characterization of Pure and Strontium Doped BaTiO3 Ceramics M. S. Hossain, M. M. Rahman, T. Chowdhury and M. F. Islam D07 Effect of Sintering Temperature on the Properties of Titania Stabilized Alumina Cutting Tools M. A. H. Shuva, M. M. A. Bepari and M. F. Islam D02 Influence of Curing Condition on the Mechanical Properties of Concrete with Ages M.R. Aminur, M. R. Harunur, M. H. M. Belal and M. M. Zakir D05 Development of Microstructure in γ-based Ti-Al Intermetallics Suitable for High Temperature Applications M. A. Halim and M. F. Islam D06 Development of Acetabular Cup and Femoral Head of Human Hip Joint by Slip Casting Method Using Zirconia Toughened Alumina (ZTA) Biomaterials M. M. Hasan and M. F. Islam D09 Characterisation of Sitakundu Clay S. K. Roy, N. C. Das and A. S. W. Kurny

3rd Intl. Conf. on Structure, Processing and Properties of Materials, SPPM2010 24-26 February 2010, Dhaka Sheraton Hotel and BUET, Dhaka

SPPM2010: The Programme | Page 19

Technical Sessions Details Plenary Session 3 26 February 2010, Friday, 09:00 am – 11:00 am Venue – IICT Seminar Room, Civil Engineering Building (1st Floor), BUET Chair: Prof. Dr. A. A. M. R. Haque, Dean, Engineering Faculty, BUET Is05 Frictional Surface Characteristics of Composite Based Automotive Brake Materials A. S. M. A. Haseeb Is06 Mechanism of Precipitation in Al-6Mg Alloy Containing Trace Additions of Scandium and Zirconium M. K. Banerjee

3rd Intl. Conf. on Structure, Processing and Properties of Materials, SPPM2010 24-26 February 2010, Dhaka Sheraton Hotel and BUET, Dhaka

SPPM2010: The Programme | Page 20

Concluding Ceremony

26 February 2010, Friday, Council Building, BUET, 11:30 am – 12:30 pm

11:25 am Guests take their seats

11:30 am Recitation from the Holy Quran

11:35 am Welcome address by the Conference Secretary Prof. Dr. A. K. M. Bazlur Rashid Department of Materials and Metallurgical Engineering, BUET

11:40 am Speech by representative of local industries Mr. Md. Jasim Uddin Managing Director, Bengal Plastics Limited

11:50 am Speech by the Guest of Honour Prof. Dr. M. Habibur Rahman Pro-Vice Chancellor of BUET

12:00 am Speech by the Special Guest Prof. Dr. A. M. M. Safiullah Vice-Chancellor of BUET

12:10 am Speech by the Chief Guest Prof. Md. Nazrul Islam Chairman of University Grants Commission of Bangladesh

12:20 am Certificate Awards Ceremony To all participating exhibitors

12:25 am Vote of thanks by the Conference Chair Prof. Dr. Md. Mohar Ali Department of Materials and Metallurgical Engineering, BUET

12:30 am Refreshment