Upload
others
View
13
Download
0
Embed Size (px)
Citation preview
Final Programme24 — 25 September 2019Congress Center Wiesbaden, Germany
www.introequipcon.com
BungartzMasterpieces
the Power of regulation
Representing the groundbreaking special centrifugal pumps from the Bungartz collection, series production
A top-class factory expertly picks up on the current movement towards pure autonomy. The dry-running centrifugal pump Van regulates itself and requires no interference. It works free of cavitation, which makes it even more fascinating. When working with toxic media it unfolds its full potential. An asset for many companies!
More information on +49 (0) 211 57 79 05 - 0 and online at: www.bungartz.de/masterpieces5
36 RZ BP_VAN Skulptur 210x297_e.indd 1 17.07.19 13:05
4TH INTERNATIONAL
ROTATING EQUIPMENT CONFERENCE
INTRODUCTION Welcome Address ............................... 05 Programme Overview .................. 06–07 Floor Plan ............................................ 08 Committees ....................................10–11
PROGRAMME DAY 1 24 September 2019 ........... 12–13 DAY 2 25 September 2019 ...........14–15
EXHIBITION Exhibitors ............................................. 16 Hall Plan ................................................ 17
PARTNERS Sponsors ............................................... 18 Media Partners .................................... 20 Supporting Associations .................... 21
Congress Organiser ......................................... 22
CONTENT
Content of final Programme most recent at the time of printing. Subject to modifications. 03
Get our free mobile app!It contains the technical programme, general information, floor plans and additional information for the 4th International Rotating Equipment Conference.
Ladies and Gentlemen,
We hope to meet you for our 4th International Rotating Equipment Conference in Wiesbaden on 24 and 25 September 2019. Come and join us at the recently inaugurated Congress Center, when the autumn leaves turn gold. Thanks to relentless R&D efforts, Pumps, Compressors and Vacuum Technology are getting better all the time. Discover exciting new developments, resulting from extraordinary innovation worldwide, at our Conference!
You deserve a front seat at our networking event. We think that there is no better place for users and equipment makers to get new ideas about the future. The 4th International Rotating Equipment Conference offers an absolutely unique possibility to present new solutions to the sector. You will meet exciting sector players face to face. That will open new perspectives.
At this new edition of the "International Rotating Equipment Conference" you will, in fact, benefit from the happy synergy of our well-respected international forums 12th Pump Users International Forum and the 5th Compressor Users International Forum. Moreover you find that many processes have been simplified by using the conference website www.introequipcon.com as a platform, such as the Call for Papers, Sponsoring, Booth Application for the Accompanying Exhibition, Hotel-booking and so on. Our extraordinary joint platform has been highly supported by trade associations and professional bodies including European partner associations EUROPUMP and PNEUROP.
You may be an end user, an equipment manufacturer, a plant designer or a component supplier, or you may be in R&D or a pumps, compressors, compressed air and vacuum technology expert or just new to the sector. Whatever your background, the quality and depth of the specialist programme will be of great value to you.
On behalf of the VDMA, we wish you a warm welcome to the Conference.
WELCOME ADDRESS
Dr. Sönke Brodersen Chairman of VDMA Pumps + Systems Association
Alexander Peters Chairman of VDMA Compressors, Compressed Air and Vacuum Technology Association
05
06
Time Acitivities
07:30 - 09:00 Registration
09:00 – 10:30 PLENARY SESSION: Welcome and Opening Address, Plenary Lecture
10:30 – 11:00 Coffee break
11:00 – 12:00 TECHNICAL SESSIONS
12:00 – 13:00 Technology Updates
13:00 – 14:30 Lunch break
14:30 – 16:00 TECHNICAL SESSIONS
16:00 – 16:30 Coffee break
16:30 – 18:00 TECHNICAL SESSIONS
18:15 – 19:00 Shuttle Service from Rhein Main Congress Centre to MS RheinFantasie (Dinner Cruise)
18:45 – 19:15 Registration Dinner Cruise
19:15 – 22:30 Dinner Cruise on the Rhine River
22:30 – 23:15 Shuttle back to Rhein Main Congress Centre
PROGRAMME OVERVIEW
DAY 1 | 24 September 2019
24 SEPTEMBER 2019
DINNER CRUISEON THE RHINEExplore the scenic river cruise and get a different perspective from Wiesbaden from the river side.
Enjoy the beautiful surrounding, the crisp breeze and warm sun and watch as the skies illuminate in array of colors while enjoying a delicious dinner and refreshing drinks!
©KD Deutsche Rheinschiffahrt GmbH
07
Time Acitivities
08:30 – 10:00 TECHNICAL SESSIONS
10:00 – 10:30 Coffee break
10:30 – 11:30 TECHNICAL SESSIONS
11:30 – 12:30 Technology Updates
12:30 – 14:00 Lunch break
14:00 – 15:00 TECHNICAL SESSIONS
15:00 – 15:30 Coffee break
15:30 – 16:30 TECHNCIAL SESSIONS
16:30 – 16:45 FINAL PLENARY SESSION: Best Paper Award, Closing remarks
DAY 2 | 25 September 2019
25 SEPTEMBER 2019
BEST PAPER AWARD Pump Users International Forum – Best Scientific Paper– Best Industry Paper
Awarded by Prof. Paul Uwe Thamsen, Chairman of the Programme Committee Pump Users International Forum
Compressor Users International Forum– Best Paper
Awarded by Prof. Andreas Brümmer, Chairman of the Programme Committee Compressor Users International Forum
CIF
KSB Room Terrassen-Saal C
Terrassen-Saal D
Terrassen-Saal A
WC
StudioTerrasse
Terrassen-Foyer
(Terrassensaal B)
Terrasse
Entrances
FLOOR PLAN
RheinMain CongressCenter Second floor Terrassensaal
PIF
08
Terrassensaal A KSB Room(Terrassensaal B)
Terrassensaal C Terrassensaal D
Sessions:22–28
Sessions:1,4,7,10,13,16,19
Sessions:2, 5, 8, 11, 14, 17, 20
Sessions:3, 6, 9, 12, 15, 18, 21
Technology Updates: 1–10
Atlas CopcoDickow PumpenHermeticKSBNeuman & EsserSiemens TH KölnWilo
5th Compressor Users International Forum incl. Vacuum Technology
12th Pump Users International Forum
Overview Room Allocation
KSB Room Terrassen-Saal C
Terrassen-Saal D
Terrassen-Saal A
WC
StudioTerrasse
Terrassen-Foyer
(Terrassensaal B)
Terrasse
Entrances
3-73149-SICP-A10003-00-SIMOCODE-Anz-A4.indd-.indd 1 03.04.19 12:03
12th Pump Users International Forum (PIF)
Advisory CommitteeBrodersen, Sönke Dr. KSBFiedler, Martin Dr. LEWAHoldhof, Jürgen Dr. EDUR-PumpenfabrikKrämer, Nicolaus HERMETIC-PumpenReinhard, Walter Sulzer Pumpen (Deutschland)Singrün, Christoph VDMA Pumpen + SystemeStöhr, Gunter URACA
Programme CommitteeArnold, Christian ProMinentBerten, Stefan Dr. Sulzer ManagementBestehorn, Dirk-Harald Infraserv ProzesstechnikFrank, Harald VDMA Pumpen + SystemeFriedrichs, Jens Prof. TU Braunschweig, IFASFritz, Jochen Dr. KSBHolz, Frank KLAUS UNIONKlütsch, Friedrich VDMA Pumpen + SystemeKneip, Boris Dr. N.N.Konrad, Jürgen DICKOW PUMPENKösters, Heiner Dr. Flowserve SIHI GermanyKröber, Werner Berliner Wasser-Betriebe (BWB)Liebetrau, Mario DelimonLudwig, Gerhard Dr. TU Darmstadt, FSTLünzmann, Hannes Dr. RickmeierNäckel, Stephan ITT Rheinhütte PumpenRiedelbauch, Stefan Prof. Uni Stuttgart / StrömungsmaschinenScheihing, Siegbert Xylem Water Solutions DeutschlandSingrün, Christoph VDMA Pumpen + SystemeSkoda, Romuald Prof. Ruhr-Uni Bochum, HSMThamsen, Paul Uwe Prof. TU Berlin, FSDTöws, Andreas WILOUdovc, Marjan BASFWulff, Sebastian Dr. TU Berlin, FSD
COMMITTEES
10
5th Compressor User International Forum (CIF)
Advisory Committee Norz, Jan Atlas Copco KompressorenPeters, Alexander NEUMAN & ESSERSingrün, Christoph VDMA Kompressoren, Druckluft- und VakuumtechnikWiemer, Matthias Dr. N.N.
Programme CommitteeBlomeyer, Niels Dr. FIPABoldt, Peter BOGE KOMPRESSORENBrand, Andreas Dr. VDMA Kompressoren, Druckluft- und VakuumtechnikBrümmer, Andreas Prof. Technische Universität DortmundEisele, Klaus SiemensEisenreich, Jürgen VDMA Kompressoren, Druckluft- und VakuumtechnikFaber, Kai Uwe Evonik IndustriesFleige, Hans-U. Dr. Aerzener MaschinenfabrikHauser, Jan Dr. Ingersoll-RandHicks, Julie EdwardsHoff, Klaus Dr. NEUMAN & ESSERKoch, Yannick BEKO TECHNOLOGIESKösters, Heiner Dr. Flowserve SIHI GermanyMachado, Raphael MAN Energy SolutionsNadler, Kai LeyboldPandolfo, Vincenzo Agilent TechnologiesPehl, Michael ThyssenKrupp Industrial SolutionsRadgen, Peter Prof. Universität StuttgartSauerborn, Markus Atlas Copco ENERGASSchuhmann, Roland BASFSingrün, Christoph VDMA Kompressoren, Druckluft- und VakuumtechnikStüber, Rene-Rose Gardner Denver Schopfheim
11
Time TERRASSENSAAL A KSB ROOM TERRASSENSAAL C TERRASSENSAAL D
07:30 – 09:00 Registration
09:00 – 10:30PLENARY SESSION
Welcome and Opening: Alexander Peters, Chairman of VDMA Compressors, Compressed Air and Vacuum Technology AssociationDr. Sönke Brodersen, Chairman of VDMA Pumps + Systems Association and President of EUROPUMPJouko Peussa, President of PNEUROP
Plenary Lecture: Digitalisation – How to manage the challenge together Dr. Matthias Fankhänel, (former) Senior Vice President Centers of Technical Expertise, BASF SE
10:30 – 11:00 Coffee break
SESSION 22 SESSION 1 SESSION 2 SESSION 3Condition monitoring Centrifugal pumps –
energy optimisation Legal frame conditions Future drive technology
11:00 – 11:30 Smart packing – The intelligent online wear measurement
Marc Langela STASSKOL GmbH
New control mode to de-crease energy consumption of circulator pumps
Martin Eckl KSB SE & Co. KGaA
Differences and similarities of ATEX and IECEx – Analysis of the legal framework and market access
Martin Thedens Physikalisch-Technische Bundesanstalt (PTB)
Evolution micro – Smallest amount dosing in the high-pressure range thanks to innovative drive technology
Bernd Freissler ProMinent GmbH
11:30 – 12:00 Maintenance of compressor operations – An ultrasound approach
Peter Holstein SONOTEC Ultraschallsensorik Halle GmbH
New generation of power drive systems for pump applications
Boris Janjic KSB SE & Co. KGaA
12:00 – 13:00 Technology Updates 1–5in KSB Room
Atlas Copco
Dickow Pumpen
Hermetic
KSB
13:00 – 14:30 Lunch break
PROGRAMME DAY 1
PIF PIFPIFCIF
12
Time TERRASSENSAAL A KSB ROOM TERRASSENSAAL C TERRASSENSAAL D
SESSION 23 SESSION 4 SESSION 5 SESSION 6Research and development
Centrifugal pumps – performance characteristics
Digital transformation Positive displacement pumps
14:30 – 15:00 Development and testing of an evacuated gearbox for high speed integrally geared compressors
Robert Marter MAN Energy Solutions
Analysis of the pressure-side recirculation influence on the head production of a radial pump at strong part load
Evgenii Palamarchuk Technische Universität Berlin
Business cases for connected pumps and compressors
Christian Ellwein KRIWAN Industrie-Elektronik GmbH
New process-safe diaphragm positioning system in oscillating displacement pumps with integrated thermal protection device
Jörg Maltry ProMinent GmbH
15:00 – 15:30 Dynamic pressure-balanced seals – From component testing to application in a centrifugal compressor
Roman Mensing Siemens AG
Numerical analysis of the flow patterns causing the performance curve instability of a high specific speed centrifugal pump
Andreas Baum Technical University of Kaiserslautern
Digitization of pumps – Industry 4.0 submodels for liquid and vacuum pumps
Maximilian Both TH Köln
ERP positive displacement pumps – Experimental validation of a type-independent efficiency model
Christian Schänzle TU Darmstadt, Chair of Fluid Systems
15:30 – 16:00 Rolling bearing solutions for mixed-media and media lubrication in compressors or pumps
Rudolf Hauleitner SKF Österreich AG
Modelling of wall roughness in flow simulations
Duc Duong Viet University of Rostock
Embedded operation point detection system for side-channel pumps on basis of neural networks
Tobias Zimmermann TU Kaiserslautern
CFD analysis of cone valves for oscillating positive displacement pumps
Daniel M. Nägel FELUWA Pumpen GmbH
16:00 – 16:30 Coffee break
SESSION 24 SESSION 7 SESSION 8 SESSION 9Digitalisation and data management
Centrifugal pumps – simulation methodology
New challenges for pumps and systems
Rotating displacement pumps
16:30 – 17:00 Digitizing vacuum generation for pick & place applications
Andrea Bodenhagen Piab Vakuum GmbH
Rotordynamic simulation of centrifugal pumps consider-ing nonlinear journal bearings including misalignment, local contact and accumulated wear
Klaus Räbiger Wilo SE
Improving the efficiency of a pump fleet by designing pumps specially for individual fixed speed drives
Jochen Schaab KSB SE & Co. KGaA
Pumping of challenging products with hermetically tight magnet driven screw pumps
Frank Holz Klaus Union GmbH & Co. KG
17:00 – 17:30 Keeping Murphy’s law in check – Accessing deeper compressor knowledge to minimize disruptive impacts on the service lifecycle management
Harry Lankenau NEAC Compressor Service GmbH & Co. KG
Balance between efficiency and cavitation – An approach for pump impeller design and optimization using inverse design and 3D CFD
Barbara Neuhierl CADFEM GmbH
Systemic optimization of booster stations – From data collection to validation
Tim Moritz Müller TU Darmstadt, Chair of Fluid Systems
Towards model-based condition monitoring for progressing cavity pumps
Jens Müller Ruhr-Universität Bochum
17:30 – 18:00 Advancement in turbo-compressor availability by integration of algorithmic artificial intelligence with human factor reliability
Ameed Alashqar Abu Dhabi National Oil Company (ADNOC)
A rule-based method for finite element calculation of boiler feed pump casings by parametrized models
Thomas Elsässer KSB SE & Co. KGaA
Reduction of complexity by smart integration and separation of functions
Ingo Dietrich TU Darmstadt, Chair of Fluid Systems
Fluid flow optimization in rotating positive displace-ment pumps with focus on perfect cleanability based on scientific proven CFD flow simulation and real tests
Erwin Weber NETZSCH Pumpen & Systeme
18:15 – 19:00 Shuttle service from Rhein Main Congress Center to MS RheinFantasie
18:45 – 19:15 Registration Dinner Cruise
19:15 – 22:30 Dinner Cruise on the Rhine River
22:30 – 23:15 Shuttle back to Rhein Main Congress Centre
23:15 End of day 1
PIF 12th Pump Users International Forum CIF 5th Compressor Users International Forum including Vacuum technology
Content of the Programme most recent at the time of printing. Subject to modifications.
PIF PIFPIFCIF
13
PROGRAMME DAY 2
14
Time TERRASSENSAAL A KSB ROOM TERRASSENSAAL C TERRASSENSAAL D
SESSION 25 SESSION 10 SESSION 11 SESSION 12Design and calculation Centrifugal pumps –
multiphysicsSubmersible pumps Centrifugal pumps –
product lubricated bearing
08:30 – 09:00 Development of a 2-room calculation model for diaphragm compressors
Philipp Atrops Neuman & Esser GmbH & Co. KG
Numerical investigation of the flow-induced noise in a centri fugal pump
Joscha Piepiorka Hamburg University of Technology, Institute of Modelling and Computation
How can the effect of iron ochre on submersible motor pumps be reduced?
Sebastian Haueisen Technische Universität Berlin
Measuring and simulation of fluid forces in annular gaps – Generic experiments cover-ing the relevant parameter range for turbulent and laminar flow in pumps
Maximilian Kuhr TU Darmstadt, Chair of Fluid Systems
09:00 – 09:30 Design and construction of a test air supply system for dynamic turbomachinery testing
Hans-U. Fleige Aerzener Maschinenfabrik GmbH
Numerical characterisation of the dynamics of thin flexible structures in a sewage pump
Ehsan Akrami School of Mechanical and Manufacturing Engineering, Dublin City University
Optimization of output of a solar powered deepwell pumpsets using information technology tools
Ramesh Ponnusamy Aquasub Engineering
CAPM vs. bulk flow – Reliable and efficient prediction of forces and leakage for annular gaps in pumps
Robin Matthias Robrecht TU Darmstadt, Chair of Fluid Systems
09:30 – 10:00 Analytical, experimental and numerical investigations on the impeller backplane pressure distribution of a high-speed centrifugal compressor
Jan Siemann Aerzener Maschinenfabrik GmbH
Experimental investigation and 3D-CFD simulation of centrifugal pumps for gas-laden liquids with closed and semi-open impellers
Markus Hundshagen Ruhr University Bochum
Permanent magnet synchronous submersible motor in combination with a modular submersible pump
Andreas Weinläder ANDRITZ Ritz GmbH
10:00 – 10:30 Coffee break
SESSION 26 SESSION 13 SESSION 14 SESSION 15Compressor application Availability (cavitation) Sewage pumps Condition monitoring I
10:30 – 11:00 Catalytic method for reliably oil-free compressed air
Ulrich Dämgen Boge Kompressoren
The relation between suction performance and reliability – A critical review of suction specific speed limitations
Frank Hafner KSB SE & Co. KGaA
Functional performance assessment of wastewater pumps – Validation with pumps from the field
Michael Pöhler Technische Universität Berlin
Enhance autonomous maintenance by utilizing local condition monitoring tool
Tariq Nadeem Saudi Aramco
11:00 – 11:30 High pressure compressors in hydrogen refueling stations – The technical way how to do
Jörg Strizek Andreas Hofer Hochdrucktechnik GmbH
Performances evolution in 4 quadrant operation under cavitation
Guillaume Pintrand Cetim
Experimental Analysis of Transient Flow Characteris-tics and Impeller Deflection in Single- Blade and Two-Blade Pumps
Steffen Melzer Chair of Hydraulic Fluid Machinery, Ruhr University Bochum
A holistic approach for pump system analytics
Stylianos Giannoulakis Sulzer Management Ltd.
11:30 – 12:30 Technology Updates 6–10 in KSB Room
Neuman & Esser
Siemens
TH Köln
Wilo
12:30 – 14:00 Lunch break
PIF PIFPIFCIF
PIF 12th Pump Users International Forum CIF 5th Compressor Users International Forum including Vacuum technology
Content of the Programme most recent at the time of printing. Subject to modifications. 15
PIFPIFCIFTime TERRASSENSAAL A KSB ROOM TERRASSENSAAL C TERRASSENSAAL D
SESSION 27 SESSION 16 SESSION 17 SESSION 18Energy efficiency Cavitation Reliability I Condition monitoring II
14:00 – 14:30 Potential European Ecodesign Regulation for Compressors – Work Done, Status and Possible Consequences
Hans-U. Fleige Aerzener Maschinenfabrik GmbH
Pump failures, often more than just one problem – A system approach
Jürgen Weinerth BASF SE
A self-learning binary controller for energy efficient pump operation
Sebastian Leonow Ruhr-Universität Bochum
14:30 – 15:00 Numerical and experimental investigation of an intra-cooling system for a two-stage slidingvane air compressor
Ida Costanzo Ing. Enea Mattei SpA
Transient flow mechanisms of cavitation in side channel pumps
Martin Böhle TLT Turbo GmbH
Non-intrusive measurement of pressure pulsations using a re-usable wire strain sensor
Guillaume Pintrand CETIM
Concept validation of a soft sensor network for wear detection in positive displacement pumps
Jakob Hartig TU Darmstadt, Chair of Fluid Systems
15:00 – 15:30 Coffee break
SESSION 28 SESSION 19 SESSION 20 SESSION 21Vacuum technology Materials and
manufacturing Reliability II Data management
15:30 – 16:00 Experimental and computational investigation of the working process in a dry claw vacuum pump
David Rowinski Convergent Science Inc.
Development of high perfor-mance economical Fe-based corrosion and erosion protec-tive coating for pump parts
Marius Siebers Insitute for Materials Technology, TU Darmstadt
Investigating the chronic high temperature reading on the lube oil system of water injection pumps
Hussain Al Shaghab Saudi Aramco
Development of a digitilized wastewater pumping station test bed
Matthias Steffen Technische Universität Berlin
16:00 – 16:30 Test and modelling of a mercury ring pump train for nuclear fusion applications
Thomas Giegerich KIT
Progress with hybrid – An additive manufacturing technology for closed impellers
Robin Rettberg Sulzer Pumps
Replacement of a mechanical sealed pump with a vertical erected canned motor pump in the course of capacity expansion of a steamcracker
Michael Maier Hermetic Pumpen GmbH
From notebooks to data-pipelines – The Darmstadt approach to handling measurement data and metadata
Nils Preuß TU Darmstadt, Chair of Fluid Systems
16:30 – 16:45FINAL PLENARY SESSION
Moderator: Christoph Singrün, VDMA Pumps + Systems, VDMA Compressors, Compressed Air and Vacuum Technology
Best Paper Award
Closing Remarks
17:00 End of Conference
PIF
Company name Booth no. City CountryANDRITZ Ritz GmbH 28 Schwäbisch Gmünd Germany
Atlas Copco Energas GmbH 30 Köln Germany
AVIBIA GmbH 13 Engelskirchen Germany
Bilfinger SE 17 Neu-Isenburg Germany
BORSIG ZM Compression GmbH 52 Meerane Germany
Bücker+Essing GmbH 46 Lingen (Ems) Germany
Celeroton AG 50 Volketswil Switzerland
Ceratec Ceramic Bearings BV 33 Geldermalsen Netherland
CFturbo GmbH 15 Dresden Germany
Crane Process Flow Technologies GmbH 12 Düsseldorf Germany
Delta P 27 Aichtal Germany
Dickow Pumpen GmbH & Co. KG 41 Waldkraiburg Germany
EthosEnergy (GBR) Limited 40 Aberdeen Great Britain
Fink Chem+Tec GmbH 43 Leinfelden-Echterdingen Germany
Flender GmbH 8 Bochholt Germany
Flowserve 64 Itzehoe Germany
Frenzelit GmbH 26 Bad Berneck Germany
Gamma Technologies LLC 53 Westmond, IL USA
Greene Tweed and Co. 38 Kulpsville USA
Hermetic-Pumpen GmbH 29 Gundelfingen Germany
IfTA Systems GmbH 57 Puchheim Germany
Klaus Union GmbH & Co. KG 36 Bochum Germany
KSB SE & Co. KGaA 32 Frankenthal Germany
KTR Systems GmbH 22 Rheine Germany
LEWA GmbH 3 Leonberg Germany
LTI Motion GmbH 39 Lahnau Germany
Mehrer Compression GmbH 37 Balingen Germany
NETZSCH Pumpen & Systeme GmbH 48 Waldkraiburg Germany
NEUMAN & ESSER GROUP 56 Übach-Palenberg Germany
Oerlikon Metco Gruppe 23 Langenfeld Germany
Optel Thevon 45 Paris France
ProMinent Deutschland GmbH 34 Heidelberg Germany
Pumpenfachingenieur GmbH 10 Vasoldsberg Austria
Rexnord Centa 25 Mechelen Belgium
Roesen GmbH Lubrication Systems 24 Horstedt / Stapel Germany
Sauer Compressors - J.P. Sauer & Sohn Maschinenbau GmbH 9 Kiel Germany
sera ProDos GmbH 2 Immenhausen Germany
SONOTEC GmbH 20 Halle (Saale) Germany
Stasskol GmbH 35 Stassfurt Germany
Sulzer Pumpen (Deutschland) GmbH 63 Bruchsal Germany
TH Köln University of Applied Sciences 6 Köln Germany
Transceram GmbH 62 Laudenbach Germany
TST-Turbo Service & Trading GmbH 42 Moers Germany
United Cast Bar Ltd. 31 Chesterfield United Kingdom
VDMA Verlag GmbH 6 Frankfurt am Main Germany
Vogelsang & Benning Prozeßdatentechnik GmbH 1 Bochum Germany
VSX - VOGEL SOFTWARE GmbH 55 Dresden Germany
EXHIBITORS
16
HALL PLAN
1 8 15 22 29 35
C ATERING ZONE
ENTR ANCES
41 48 55 62
6356
6457504337312417103
49423630231692
65585144383225184 11
5245393326191255346403427206 13
7 14 21 28 47 54 61 68
EXHIBITION HALL (SOUTH)
© Rhein-Main-Hallen GmbH_Peter Krausgrill_stadtleben.de
17
We thank all our Sponsors for their extraordinary support!
SPONSORS
18
HE, VDMA = DIN A 4
VDMA - H2 Kampagne 1-seitig 2019-08.indd 1 02.09.19 13:15
MEDIA PARTNERS
∆p
Oil and Gas INNOVATION®
We thank all our Media Partners for their extraordinary support!
20
SUPPORTING ASSOCIATIONS
We thank all our Supporting Associations for their extraordinary support!
21
CONGRESS ORGANISER
MAIN ORGANISER
VDMA Services GmbHLyoner Straße 1860528 Frankfurt am Main Germany
Nicole PotzPhone: +49 69 [email protected]
The VDMA Services GmbH is a fully-owned service sub-sidiary of VDMA, that not only supports the participa-tion of the German engineering industry in more than 60 fairs all over the world, but also offers fair and event management as a professional full service. A key service of the VDMA Services GmbH is the development and support of fair concepts which meet the actual needs of each industry segment and strengthen the position of the capital goods industry.
POWERED BY
VDMA Pumps + Systems VDMA Compressors, Compressed Air and Vacuum Technology Lyoner Straße 18 60528 Frankfurt am MainGermany
4TH INTERNATIONAL
ROTATING EQUIPMENT CONFERENCE
22
Anzeige_PIP_Image_210x297_en_pfade_umgewandelt.indd 1 29.07.2019 11:42:56
KSB Guard. Ensures the availablity of your system. Discover a whole new level of pump monitoring. www.ksb.com/industry40
MORE MONITORING. LESS TROUBLE- SHOOTING.