Final Ojt Report - Sestoso, Adan Raymond d

1 | P a g e

Final ON-THE-JOB TRAINING REPORT SESTOSO, ADAN RAYMOND D. 2009-04089-MN-0 B.S. INTERIOR DESIGN

2 | P a g e

On the job training or OJT is one method by which students is given a chance to apply

the theories and computations that they have learned from the school. It also helps the students to

acquire relevant knowledge and skills by per forming in actual work setting. Colleges and

universities require their students to undergo such training within a specific number of hours as

part of the curriculum.

For the students, an OJT or internship program provides opportunities to go through the

actual methodologies of a specific job using the real tools, equipments and documents. In effect,

the workplace becomes a development venue for a student trainee to learn more about his chosen

field and practice what he has learn from academy.

On the other hand, an effective OJT program also benefits the companies who accept

trainees. First OJT or intern provides additional manpower for a lesser labor cost than a regular

employee. Most of them are all eager to learn the ropes so chances are high that they will

cooperate.

Employers can use this internship strategy as a method in recruiting new employees.

Since the trainer or the supervisor can follow the trainees’ progress, he can gauge based on

performance, behavior and attitude if the trainee will make a good recruit after the completion of

his internship.

Accommodating on-the-job trainees can truly be beneficial not only to the trainees but

also to the companies that provide opportunities for this type of learning. There is wisdom in the

front lines. Such training can be an investment that will be valuable to the company later on. This

is also why trainees should take their internship seriously as it can become a powerful tool and

INTRODUCTION

3 | P a g e

possibly even a source of recommendation when they take that big lift from being students to

career professionals.

In totality OJT Program is one of the most important experience that the student need as

part of the fulfillment of his/her studies. This experience helps student in preparation to the real

or actual work and It will provide knowledge and lessons that is very helpful in there daily life.

Personal Data

Name: Sestoso, Adan Raymond D.

Address: Blk. 13 lot 2 Purok 6 Zone 8 Cupang, Antipolo City

Cell No. : 09087077204

Email Address: [email protected]

Nationality: Filipino

Civil Status: Single

Date of Birth: April 13, 1993

Religion: Roman Catholic

Father’s Name: Eulogio M. Sestoso

Mother’s Name: Amy D. Sestoso

Language: English / Filipino

PERSONAL PROFILE

4 | P a g e

Educational Background

COLLEGE LEVEL : Polytechnic University of the Philippines 2009- Present

BS Interior Design

SECONDARY LEVEL : Cupang National High School 2005-2009

OLOPSHOA Purok 2 Zone 8 Brgy. Cupang, Antipolo City, Rizal

PRIMARY LEVEL : Cupang Elementary School 2002-2005

Villa Corazon Subd., Brgy. Cupang, Antipolo City, Rizal

: SSS Village Elementary School 1999-2002

: Little Angel Play Center 1998-1999

MC DACANAY ARCHITECTURAL DESIGN OFFICE - owned by Architect Manifelmo

Dacanay.

ERFE & ASSOCIATES

Erfe & Associates is located in J & F Building II, Cainta,, Philippines. Company is

working in Architectural & Interior Design services.

ACMI WORKPLACE DESIGN CENTER

COMPANY BACKGROUND

With the expanding economy & influx of foreign investors during the new millennium,

the demand for fast, easy and fashionable office set up was insatiable. WORKPLACE DESIGN

CENTER & ACMI Office Systems Phils. Inc., was born in the mid 2000, aiming to give the

working environment a look to welcome the 21st century. Designing the workplace has always

been our business. Custom made to fit your specifications plus making sure designs are practical,

functional and fashionable. Chairs ranging from ergonomic to a plain simple stool, executive

tables, worktop/counter top, shelves & cabinets (steel or wooden) and partitions, you name it we

can have it for you, Toilet partition, Restaurants, Canteen table and chairs. Harmony in the

COMPANY

5 | P a g e

workplace is what we work to achieve. Our team of highly competent professionals has

extensive exposure in their field of expertise. This group of designers and interior decorators are

ever so efficient to deal with the smallest details of each area in every layout to suit your

demand. Our company believes that every product leaving our store should have the guarantee of

good quality.

VISION

To be identified as the carrier of world’s best-known quality office furnishings & known

for being the most reliable in workplace environment setup

MISSION

To be recognized as a contributor in the field of office space management maintaining

our standard of service and reliability outdoing all others in the same industry.

COMMITMENT

Provide total client satisfaction through competent personnel and quality

LIST OF OFFICER

President: Richard Ngui

Vice President: Andrew Ngui

Secretary: Natalie Lim

Treasurer: Charity Ngui

General Manager: Catherina R. Luna

This chapter narrates the activities that the student trainees had gone through during the

training. This also includes the observation, participation, interaction and challenges during their

training.

ON-THE-JOB TRAININGACTIVITIES

6 | P a g e

NARRATIVE EXPERIENCE

M.C. DACANAY ARCHITECTURAL DESIGN OFFICE

April 02, 2012, it was the date when the trainee started the on the job training at M.C.

Dacanay Architectural Design Office. Archt. Manifelmo C. Dacanay was the owner of this office

since 25 years. It is an architectural services office situated at 8 Jones St. Filinvest Cainta, Rizal.

The trainee was assigned at the second floor of DreamHomes Condominium Project

where the employer gives the trainee an opportunity to make and design a bulletin board and an

information board in sketch up. The mentor of the trainee helps by teaching keyboard command

on sketch up and simple techniques in how to make a bulletin board and information board.

April 03, 2012, the trainee continued doing information center board for DreamHomes

Condominium project. After doing the information board on sketch up, the trainee assigned to

print PDF files and help in preparing of presentation drawings and plates.

April 11, 2012, the trainee was appointed at Jestoni Alarcon Project where the trainee

assigned to make a shop drawing of powder room cabinet and master’s T&B cabinet in

AutoCAD, and detailed it properly.

April 12, 2012, the trainee was still working on detailing the shop drawing of master’s

T&B. After working on detailing the shop drawing, the trainee assigned to encode in AutoCAD

the front elevation of the kitchen area of Jestoni Alarcon Project.

April 16, 2012, the trainee attended on the Bible Study of the office, and then the trainee

continued working with his unfinished task. After the trainee finished it, he assigned again at

DreamHomes Condominium Project. By this time, he assigned to make and design a shelving

7 | P a g e

and door of the cabinet at the kitchen of the said project. Then after that the trainee assigned to

encode in AutoCAD the floor plan of girl’s bedroom, kitchen, and family area.

April 17, 2012, the trainee assigned at Jestoni Alarcon Project and he assigned to encode

in AutoCAD the top view or plan of stairs, powder room and closet. After the trainee finished it,

he voluntary helps in the preparation of birthday celebration of his employer. The mentor of the

trainee assigned him to make a vicinity map of the venue of the Birthday celebration of the

trainee’s employer.

April 19, 2012, it was the day when the trainee finished his 50hrs OJT training in MC

Dacanay Office. The trainee assigned to encode in AutoCAD the sewer & drainage layout and

the lighting & power layout of CCT Palawan Commercial Center Project.

ERFE & ASSOCIATES

April 26, 2012, it was the date when the trainee started the on the job training at ERFE &

ASSOCIATES. Ma. Alicia B. Erfe, Arch., I.D. was the owner of this office. It is an architectural

& interior design services office situated at Room 204&206 J&F Building II V.V. Soliven Ave.,

Cainta, Rizal.

The trainee started his (4) four days work as an assistant and a helper. He helped in

preparation of plates/ drawings for blueprinting; helped in preparation of swatches board,

scanning of contract documents & report papers, arranging the swatches library and I.D.

sourcing.

May 03, 2012, the trainee was assigned at 2nd

floor study area of Lichauco Residence

Project where the trainee’s mentor assigned to encode the Family TV cabinet in AutoCAD. On

8 | P a g e

the following days, the trainee had already worked just like a regular employee of the ERFE &

ASSOCIATES.

May 11, 2012, it was the day when he appointed at Evaristo Unit Project where he

assigned to encode a plan and to make a 3D model/ perspective of TV cabinet at lining room.

May 15, 2012, it was the day when the trainee finished his 100hrs OJT training in ERFE

& ASSOCIATES and it was also his second day on the site. On the site, the trainee noticed that

most furniture in the unit/ project site was made of wood. He also noticed that the room was in

modern/ contemporary style. The mentor of the trainee assigned him to help in set- upping the

main areas of the room for tenant occupancy. He also learned how they install knock down

furniture through observing them and he helped in cleaning and sweeping the floor after the

installation of furniture.


May 17, 2012, it was the date when the trainee started the on the job training at ACMI

WORKPLACE DESIGN CENTER. It is a supplier of office furniture and a furniture

manufacturing company situated at 464 Audrich Building Lt. Artiaga, San Juan City.

The trainee was assigned at AAW Inc. Project where the employer assigned to make a 3D

model or perspective of coffee table & display cabinet. It was very challenging to the trainee

because he is not already expert in AutoCAD 3D Model. Then after he finished it, the trainee

assigned to answer all phone calls that the company receives.

May 18, 2012, the trainee assigned at Art B. Piano Project and he assigned to make a

perspective or 3D model of hanging cabinet, executive table, side table, office tables, conference

9 | P a g e

table, and freestanding table. It was very pressure to the trainee because it was too many. After

the trainee finished it, he helps his mentor in the preparation of the Sales Report of their

company.

May 21, 2012, the trainee assigned to make a 3D model or perspective of steel cabinet/

locker and racks on AutoCAD. After the trainee finished it, his mentor gives him a time to read

magazines & books in their library.

May 22, 2012, because it is not a busy day the trainee gives time to use their computer in

social networking. After lunch the trainee assigned to make or design a proposed counter for

information area and render it on sketch up.

May 23, 2012, the trainee was appointed at GLC Project where his mentor gives an

opportunity to propose (3) three furniture layout for the 2nd

floor of GLC’s office. After he

finished it, he assigned to input the purchase order of their clients in Microsoft Excel.

May 24, 2012, At GLC Project, the trainee assigned again to design/ propose (2) two

reception counter in 3D mode. The trainee used sketch up in preparation of his proposal. After

doing his proposal, the trainee’s mentor assigned him to fax their quotation notes in the clients.

May 25, 2012, it was the day when the trainee finished his 50hrs OJT training in ACMI

Workplace Design Center. The trainee’s last assignment was to make a plan or top view of a

reception counter that the trainee proposed. After he finished it, he assigned to make and input a

quotation notes on Microsoft Excel.

Being an apprentice on that kind of offices/ companies was really remarkable. All the

skills and techniques that they shared with the trainee will help him for his future career.

OBSERVATION

10 | P a g e

The trainee who was training at different companies with the different field of practice,

observed the differences and their similarities. Another thing that the trainee observed was the

rules and regulation that the companies initiated. Before entering the company, regular frisking

and baggage inspections were conducted. Trainees are not included as a visitor. Another was the

NO smoking, sleeping and by standing rule. Gadgets like mobile phones and portable mp3

players are not allowed during working hours. Gadgets must be placed on the locker room/

pantry. Requests like emergency calls are accepted making sure that the call was important and

entertain able.

PARTICIPATION

The trainee participated in the normal operation of the company by maintaining the

cleanliness of the office. The trainee was participated in bible study of the office and also in

meetings and orientation.

The trainee also participated as a tool keeper on the office. Tools and materials must be

kept to avoid misplacing it. Tools must be clean before they were returned to the drawers and

tool box.

CHALLENGES

During the trainee’s on-the-job training, he met some challenges that push him to work

much better. First is when one of his co-workers challenged him to be greedy in learning new

things and skills. That is also the time when the trainee’s supervisor said that if he later want

high grade, he must work like a real employee. That was a big challenge for the trainee. He was

only a trainee, so the supervisor must supervise him and not to let him handle a situation than he

didn’t know. And because of that, the trainee learned to put a dedication to his work. Lastly, one

11 | P a g e

challenge that the trainee met was the climate during his

working hours on the field or in the office.

Architecture

M. C. Dacanay Architectural Design

Office

I. DAILY LOG TRAINING EXPERIENCE

II. WEEKLY ACCOMPLISHMENT REPORT

III. CERTIFICATION OF ACCEPTANCE

IV. MENTOR/ EMPLOYER’S PRC

V. EVALUATION FORM

12 | P a g e

POLYTECHNIC UNIVERSITY OF THE PHILIPPINES

COLLEGE OF ARCHITECTURE AND FINE ARTS

DEPARTMENT OF INTERIOR DESIGN PUP Engineering and Architecture BuildingNDC Compound,

Anonas cor. Pureza Sts., Sta. Mesa, Manila Tel: (632) 713 9304

BS INTERIOR DESIGN OJT REPORT

Daily Log of Training Experience

Date: April 02 , 2012

Name of Student: Sestoso Adan Raymond Deguitos Family Name First Name Middle Name

Office/Company Name: M. C. Dacanay Architectural Office

Address: 8 Jones St. Filinvest East Cainta, Rizal

Project Title: Dream Homes Condominium Project Description:

Project Location:

Assigned Work Task: Sketch-up Office Site Others, pls. specify

Time In : 1:05 p.m

Time Out : 6:14 p.m Total No. of Hour/s Spent: 4

Weather Condition: Sunny Site Condition:

Work Activities Performed:

Company Orientation

Bulletin Board & Information Area – Dream Homes Condominium

(Google Sketch Up)

Personal Observations at the Project Site:

13 | P a g e

Report/s Submitted, if any:

Lesson/s Learned:

I learned how to use the component and group command in Google sketch-up.

Picture/s Taken, if any:

Certified True and Correct by: Noted by:

ARCHT. MANIFELMO C. DACANAY

Mentor IDr. Billie Jean Dumlao-Dela Cruz, piid (Signature above Printed Name) Faculty OJT Coordinator

14 | P a g e

Date: April 02 , 2012 Date: ________________ , 2012











Project Title: Dream Homes Condominium Project Description:

Project Location:

Assigned Work Task: Sketch-up Office Site Others, pls. specify

Time In : 8:10 a.m.

Time Out : 6:25 p.m. Total No. of Hour/s Spent: 8



Continuation :Bulletin Board & Information Area – Dream Homes Condominium

(Google Sketch Up)

Office work -Printing PDF File

Preparation of Presentation Drawings

15 | P a g e



Lesson/s Learned:

I learned how to prioritize time and to work fast. They taught me that I need to sketch or draw my plan first in notebook/ paper before I apply or encode it in Sketch Up.

I learned how to export 2D (Sketch up) to Google Lay out.




16 | P a g e


Date: April 03 , 2012 Date: ________________ , 2012











Project Title: Jestoni Alarcon Project Project Description:

Project Location:

Assigned Work Task: AutoCADD -Encoding Office Site Others, pls. specify

Time In : 8:30 a.m.




Detailing in AutoCADD

Shop Drawing of Dressing/ Powder Room (Sectional) - Jestoni Alarcon Project

Detailing of Closet in Auto CADD- Master T&B (Top, Front, Sectional)

Jestoni Alarcon Project


17 | P a g e


Lesson/s Learned:

I learned how to encode details in shop drawing by using Auto CADD

I learned also how to used (XL) and (MA) match property command in Auto CADD.




18 | P a g e


Date: April 11 , 2012 Date: ________________ , 2012











Project Title: Jestoni Alarcon Project Project Description:

Project Location:


Time In : 8:05 a.m.




Continuation: Detailing of Closet in Auto CADD- Master T&B (Top, Front, Sectional)


Match property (MA)- Auto CADD (Kitchen: Front View) - Jestoni Alarcon Project

Color matching in Adobe Photoshop (DVPRO Plan) Tagaytay City Project


19 | P a g e


Lesson/s Learned:

I learned how to apply color in a floor plan by using Adobe Photoshop.





20 | P a g e

Date: April 12 , 2012 Date: ________________ , 2012











Project Title: Project Description:

Project Location:


Time In : 7:58 a.m.




Continuation : Match property (MA) in Auto CADD – Kitchen Area


Encoding in Auto CADD – Plan of Girl’s Bedroom, Kitchen, and Family Area

Dream Homes Condominium Project – Kitchen Area : Shelving and Doors of Cabinet

Google Sketch Up


21 | P a g e


Lesson/s Learned:

I learned how to encode floor plans in Auto CADD

I learned ho to export sketch up(2D) to Auto CADD Drawing

I learned also to apply proper measurements of kitchen cabinet in sketch up




22 | P a g e


Date: April 16 , 2012 Date: ________________ , 2012












Project Location:

Assigned Work Task: AutoCADD & SketchUp Office Site Others, pls. specify

Time In : 7:54 a.m.




Encoding – Auto CADD

Plan of Stairs, Family Area, Powder Room, and Closet

Vicinity map – ( Sketch Up) Venue of Birthday celebration of Archt. Dacanay

Manual Drawing and measurements of Isometrical view of Parking Ramp

Renovation: Parking lot of Archt. Dacanay House

23 | P a g e



Lesson/s Learned:

Today, I learned how to encode floor plan of stairs, powder room and closet.

I learned how to use PLOT command in Auto CADD

I learned also how to properly measure a parking ramp; what materials to be used.



24 | P a g e



Date: April 17 , 2012 Date: ________________ , 2012











Project Title: CCT Palawan Project Project Description:

Project Location:


Time In : 7:53 a.m.




Encoding Sewer and Drainage Layout in Auto CADD

(CCT Palawan Commercial Center)

Encoding Lighting and Power Layout in Auto CADD

(CCT Palawan Commercial Center)


25 | P a g e


Lesson/s Learned:

I learned how to encode electrical symbols, switch connections, sewer layout and drainage layout in Auto CADD

I learned also how to put legend in Auto CADD




26 | P a g e


Date: April 19 , 2012 Date: ________________ , 2012

CERTIFICATION OF ACCEPTANCE

27 | P a g e

WEEKLY ACCOMPLISHMENT REPORT Page 1

28 | P a g e

WEEKLY ACCOMPLISHMENT REPORT Page 2

29 | P a g e

30 | P a g e

EVALUATION FORM – MC DACANAY ARCHITECTURAL DESIGN OFFICE

31 | P a g e

Interior Design Firm

ERFE & ASSOCIATES

- Erfe & Associates is located in J & F Building II, Cainta,, Philippines. Company is working in Architectural & Interior Design services.

I. DAILY LOG

TRAINING EXPERIENCE

II. WEEKLY ACCOMPLISHMENT REPORT

III. CERTIFICATION OF ACCEPTANCE

IV. MENTOR/ EMPLOYER’S PRC

V. EVALUATION FORM

32 | P a g e









Office/Company Name: ERFE & ASSOCIATES

Address: Room 204 & 206, J & F Building II V.V. Soliven Ave., Cainta, Rizal

Project Title: Edades Tower & Garden Project Description:

Project Location: Villas Rockwell Center, Makati City


Time In : 9:00 a.m.

Time Out : 6:00 p.m. Total No. of Hour/s Spent: 8 hrs.



Preparation of contract drawings for blueprinting

Scanning of contact documents & report papers.


33 | P a g e


Lesson/s Learned:



IDr. Billie Jean Dumlao-Dela Cruz, piid Faculty OJT Coordinator

Date: April 26 , 2012 Date: ________________ , 2012

34 | P a g e











Project Title: CITADINES Project Project Description:

Project Location: Salcedo, Makati City

Assigned Work Task: Office Site Others, pls. specify

Time In : 9:00 a.m.




Preparation of contract drawings for blueprinting

Helps in preparation of swatch boards.


35 | P a g e


Lesson/s Learned:




Date: April 27 , 2012 Date: ________________ , 2012

36 | P a g e











Project Title: Edades Tower & Garden Villas Project Description:



Time In : 9:00 a.m.




Preparation of contract drawings for blueprinting (For Submission to the contractor)

- The Grove Amenity 5th & 6th floor E. Rodriguez Ave., C-5 Road, Brgy. Ugong, Pasig

City; helps in preparation of the contract drawings.


37 | P a g e


Lesson/s Learned:




Date: April 30 , 2012 Date: ________________ , 2012

38 | P a g e







Date: May 02 , 2012




Project Title CITADINES – Mock- up Unit Project Description: I.D. Sourcing

Project Location: Salcedo , Makati City

Assigned Work Task: Schedule of Appliances Office Site Others, pls. specify

Time In : 9:00 a.m.




I.D. Sourcing – Schedule of Appliances (Microsoft Excel)

Fixing the Paint Library

Scanning of Contract documents and report papers.


39 | P a g e


Lesson/s Learned:




Date: May 02 , 2012 Date: ________________ , 2012

40 | P a g e







Date: May 03 , 2012




Project Title: LICHAUCO Residence Project Project Description: Furniture

Project Location: #23 Leo St., Bel-air , Makati City

Assigned Work Task: AutoCADD Office Site Others, pls. specify

Time In : 9:00 a.m.


Weather Condition: Cloudy Site Condition:


Encoding – AutoCADD

2/f Study/ Family TV CABINET – Lichauco Residence


41 | P a g e


Lesson/s Learned:




Date: May 03 , 2012 Date: ________________ , 2012

42 | P a g e







Date: May 04 , 2012




Project Title: Edades Tower & Garden Project Description:


Assigned Work Task: Preparation of Plates Office Site Others, pls. specify

Time In : 9:00 a.m.


Weather Condition: Rainy Site Condition:


Preparation of contract drawings/ plates for blueprinting (Coloring the plates)

Measuring the sizes of the pictures for framing .


43 | P a g e


Lesson/s Learned:

-




Date: May 04 , 2012 Date: ________________ , 2012

44 | P a g e







Date: May 07 , 2012





Project Location:

Assigned Work Task: Preparation of plates Office Site Others, pls. specify

Time In : 9:00 a.m.




Continuation of preparation of contract drawings/ plates for blueprinting (Coloring the plates)

Tansipek Residence – Paint Finish Specification / Description

Preparation Of Swatch Boards

Citadines Salcedo Makati City



45 | P a g e

Lesson/s Learned:




Date: May 07 , 2012 Date: ________________ , 2012

46 | P a g e







Date: May 08 , 2012




Project Title: James Chua Unit Project Description:

Project Location: 3507 One Roackwell West, Makati City


Time In : 9:00 a.m.




I. D. Sourcing – James Chua Unit - Finding Sheer Fabrics & Heavy Drape

Preparation of contract drawings/ plates for blue printing.


47 | P a g e


Lesson/s Learned:




Date: May 08 , 2012 Date: ________________ , 2012

48 | P a g e







Date: May 09 , 2012




Project Title: Edades Tower & Garden Villas Project Description:

Project Location: Rockwell Center, Makati City


Time In : 9:00 a.m.


Weather Condition: Fair weather Site Condition:


Preparation of contract drawings/ plates for blueprinting

Photo printing of pictures in TroniX – Q Plaza, Cainta

Help in preparation of swatch board - Finding Kimono Violet paint swatch on paint library


49 | P a g e


Lesson/s Learned:




Date: May 09 , 2012 Date: ________________ , 2012

50 | P a g e







Date: May 10 , 2012





Project Location:


Time In : 9:00 a.m.




Arranging of Fabrics swatches, carpets, sheers, and leathers given by the supplier.

Preparation of Plates/ Drawing for blueprinting (Coloring the plates)


51 | P a g e


Lesson/s Learned:




Date: May 10 , 2012 Date: ________________ , 2012

52 | P a g e







Date: May 11 , 2012




Project Title: Evaristo Unit Project Description: Furniture

Project Location:

Assigned Work Task: Sketch up Office Site Others, pls. specify

Time In : 9:00 a.m.




Encoding & Making a Perspective of TV Cabinet @ Living Room (Vanishing Finish) Evaristo Unit in Sketch up



53 | P a g e

Lesson/s Learned:

- I learned how to make a TV cabinet in Sketch up




Date: May 11 , 2012 Date: ________________ , 2012

54 | P a g e







Date: May 14 , 2012




Project Title: Mark Lopez Project Project Description:

Project Location: 3916 One Rockwell West, Makati City

Assigned Work Task: Site Visit Office Site Others, pls. specify

Time In : 9:00 a.m.




Observing how they install knock- down furniture

Assisting/ helping the workers in installing knock- down furniture

and help in cleaning and sweeping the floor after the installation of furniture


- The unit was small but all of the space was rearranged properly. - They use wood laminated vinyl in flooring - The unit/ room used neutral color. - The space provides natural ventilation and natural light.

55 | P a g e


- I learned how to properly install the knock down furniture.

Lesson/s Learned:




Date: May 14 , 2012 Date: ________________ , 2012

56 | P a g e







Date: May 15 , 2012




Project Title: Mark Lopez Project Project Description:

Project Location: 3916 One Rockwell West, Makati City

Assigned Work Task: Site Visit Office Site Others, pls. specify

Time In : 9:00 a.m.




Helps in set- upping the main areas of the unit for tenant occupancy.

Observing how they install knock- down furniture

Assisting/ helping the workers in installing knock- down furniture

and help in cleaning and sweeping the floor after the installation of furniture


- All furniture were in modern/ contemporary style - All furniture used in the unit/ room are made of wood.

57 | P a g e


Lesson/s Learned:

- I learned how to rearrange the furniture and how to take care of the furniture. For example, what cleaner shall we use in wood? in fabric?




Date: May 15 , 2012 Date: ________________ , 2012

58 | P a g e

CERTIFICATION OF ACCEPTANCE

59 | P a g e

On-The-Job Training Weekly Accomplishment Report Page 1

60 | P a g e

On-The-Job Training Weekly Accomplishment Report Page 2

61 | P a g e

62 | P a g e

63 | P a g e

EVALUATION FORM – ERFE & ASSOCIATES

64 | P a g e

Furniture Manufacturing Office


- Acmi Workplace Design Center is located in San Juan, Philippines. Company is working in General office services, Office furniture, Furniture manufacturer and designer.

I. Daily log of Training experience II. On-The-Job Training Weekly Accomplishment Report III. Certification of Acceptance IV. PRC & PTR Receipt V. Evaluation Form

65 | P a g e







Date: May 17 , 2012


Office/Company Name: ACMI/ WORKPLACE DESIGN CENTER

Address: 464 Audrich Building Lt. Artiaga St. San Juan City

Project Title: AAW INC. Project Project Description:

Project Location:

Assigned Work Task: AutoCAD Office Site Others, pls. specify

Time In : 8:19 a.m.




AutoCAD – Perspective of coffee/ center table & display cabinet AAW Inc.


66 | P a g e


Lesson/s Learned:

- I learned how to used 3D modeling in AutoCAD because I’m not already expert in 3D modeling and rendering.


Certified True and Correct by: Noted by:l


Date: May 25 , 2012 Date: ________________ , 2012

67 | P a g e







Date: May 18 , 2012




Project Title: Art B. Piano Project Project Description:

Project Location:

Assigned Work Task: Google Sketch up Office Site Others, pls. specify

Time In : 8:19 a.m.




Sketch Up – Perspective and Dimension of Hanging cabinet, Executive table, Side table, Office tables, Conference table.


68 | P a g e


Lesson/s Learned:

- I learned the standard dimension/size for the office tables and cabinet.




Date: May 25 , 2012 Date: ________________ , 2012

69 | P a g e






Date: May 21 , 2012





Project Location:


Time In : 8:02 a.m.


Weather Condition: Rainy Site Condition:


AutoCAD – Perspective of Steel Cabinet/ Locker & Racks for Preparation in quotation.


70 | P a g e


Lesson/s Learned:

- I learned the standard dimension/size for the Steel Locker & Racks.




Date: May 25 , 2012 Date: ________________ , 2012

71 | P a g e






Date: May 22 , 2012





Project Location:

Assigned Work Task: Sketch Up Office Site Others, pls. specify

Time In : 08:03 a.m.




Sketch Up – Make a proposed counter @ Information Area


72 | P a g e


Lesson/s Learned:

- I learned how to make information counter in sketch up.




Date: May 25 , 2012 Date: ________________ , 2012

73 | P a g e






Date: May 23 , 2012




Project Title: GLC Project Project Description:

Project Location:


Time In : 7:57 a.m.




AutoCAdd – Make a proposed furniture layout ( 2D drafting & annotation) GLC Project


74 | P a g e


Lesson/s Learned:

- I learned how to make a proposed furniture layout in AutoCAD

- I also learned how to input purchase order in Microsoft Excel




Date: May 25 , 2012 Date: ________________ , 2012

75 | P a g e






Date: May 24 , 2012





Project Location:

Assigned Work Task: Sketch Up Office Site Others, pls. specify





AutoCAdd – Design/ make 3D model of a proposed reception counter 2 Proposed Reception Counter


76 | P a g e


Lesson/s Learned:

- I learned how to make a reception area in sketch up.

- I also learned how to used fax machine because I didn’t know how to use it before.




Date: May 25 , 2012 Date: ________________ , 2012

77 | P a g e






Date: May 25 , 2012





Project Location:






Plan/ Top of Reception counter that I made & render it on Sketch UP


78 | P a g e


Lesson/s Learned:

- I learned how to render an object/ component in sketch up & to how to create lighting shadow.

- I also learned how to input quotation letter/ note in Microsoft Excel.




Date: May 25 , 2012 Date: ________________ , 2012

79 | P a g e

80 | P a g e





BS Interior Design On-the-Job Training ON-THE-JOB TRAINING WEEKLY ACCOMPLISHMENT REPORT

Name of Student: Sestoso, Adan Raymond Deguitos Family Name, First Name Middle Name

Student No.2009-04089-MN-0 Employed by: ACMI

Address:464 Lt. Artiga St. San Juan

Reporting Period from: 17th May 2012___ to 25th May 2012__ Day Month Day Month

Item No.

Project Title/Description/Location Field of Practice

(Brief Description) No. of Hours

Percentage of

Assigned Work

Completed

100% = Full Completion

1 • AutoCAD – Perspective of

coffee/ center table & display cabinet

AAW Inc.

AutoCAD – Furniture 4hrs 95%

2 • Sketch Up – Perspective and Dimension of Hanging cabinet, Executive table, Side table, Office tables, Conference table and freestanding tables.

Sketch up - Furniture 8hrs 100%

3 • Sketch Up – Make a proposed counter @ Information Area

Sketch up - Furniture 6hrs 100%

4 • AutoCAdd – Make a proposed furniture layout ( 2D drafting & annotation)

GLC Project

AutoCAD-Furniture layout

8hrs 97%

5 • AutoCAdd – Design/ make 3D model of a proposed reception counter

2 Proposed Reception Counter

Furniture 8hrs 100%

81 | P a g e

Recommendations for the Trainee’s further growth and development:

Checked and Approved by: Conforme:

SESTOSO, ADAN RAYMOND D.

OJT Faculty Coordinator Student Trainee (Signature above printed name) (Signature above printed name)

82 | P a g e

83 | P a g e

EVALUATION FORM – ACMI WORKPLACE DESIGN CENTER

Documents

Final Ojt Report - Sestoso, Adan Raymond d