Upload
others
View
17
Download
0
Embed Size (px)
Citation preview
Field Preparations with Topcon ToolsField Preparations with Topcon Tools
August 2009Oscar R. Cantu’
August 2009
• For access to previously offered webinars and supporting documentation, please go to:
Field Preparations with Topcon Tools
Topcon University FTP SiteTopcon University FTP Site
ftp://TUlive+topconuniversity.com:[email protected]
August 2009
• Topcon Tools office software, product definition• NGS Datasheet compilation• Export to Device from Topcon Tools as TopSURV job• View compiled data in Topcon Tools within Google Earth• Export file from Topcon Tools in Google Earth (KMZ) format• View Google Earth KMZ file on Topcon GRS-1 receiver with Google
Maps freeware• TopSURV Data Collection Software• Review of Common Workflow
Field Preparations with Topcon Tools
AgendaAgenda
August 2009
Field Preparations with Topcon Tools
Topcon ToolsTopcon Tools• Office software that supports all Topcon
survey instruments and data collectors• Modular software including Total Station,
RTK, Post Processing, GIS, Design, and Imaging
• Easily customizable for your workflow• Multiple views of your field work
(Occupation, Google Earth, Tabular, CAD, and 3D)
August 2009
Field Preparations with Topcon Tools
• Powerful and intuitive options for multiple map projection displays
• Ability to import and work with multiple days worth of field work at a time and manage as a project
• Fully customizable reporting of analysis and quality control checking
• Helpful blank canvass with office preparation for field work.
• Part of impressive workflow for compiling multiple data types, identify and solve issues, view in Google Earth, and export to field controllers.
Topcon Tools Office SoftwareTopcon Tools Office Software
August 2009
Field Preparations with Topcon Tools
• Highly automated and easy to use post processing office software• Provides the link between field and office (data transfer)• Supports all the sensors in the Topcon product family• Large selection of Import and Export file formats
Topcon Tools Office SoftwareTopcon Tools Office Software
August 2009
Field Preparations with Topcon Tools
• There are currently eight Topcon Tools modules. Five modules are standalone and three require another (parent) module in order to run.
Topcon Tools ModulesTopcon Tools Modules
Topcon Tools Module Type Required Modules
Total Station (TS) Standalone
Real Time Kinematic (RTK) Standalone
Post Processing (PP) Standalone
Geographic Information Systems (GIS) Standalone
Design Standalone
Advanced Post Processing Add On Post Processing
GIS High Accuracy Add On GIS
Imaging Add On Total Station and Design
August 2009
Field Preparations with Topcon Tools
• These eight unique modules offer customizable functionality:– Post Processing (PP) - Basic static file post processing functionality– Real Time Kinematic (RTK) - Basic Real Time Kinematic processing– Total Station (TS) – Conventional and robotic total station support along
with digital levels.– Geographic Information Systems (GIS) - Less sophisticated version of
the PP module for DGPS data. Will process data of L1 frequency only.
Topcon Tools Office SoftwareTopcon Tools Office Software
August 2009
Field Preparations with Topcon Tools
• There are eight unique modules to offer customizable functionality:– Design - Basic Computer Aided Drafting (CAD)
functionality
– Imaging - functionality for working with images, stereopairs, and scan sessions
– Advanced - Offers additional tools and functionality for static post processing
– High Accuracy GIS – Full functionality of PP engine (dual frequency L1 and L2).
Topcon Tools Office SoftwareTopcon Tools Office Software
August 2009
Field Preparations with Topcon Tools
• Topcon Tools will also run in Demonstration (Demo) Mode.
• In this mode, the Advanced Modules are not activated and the job size is restricted to five points.
• However, users have the opportunity to truly try out the software prior to purchase.
Topcon Tools Try OutTopcon Tools Try Out
August 2009
Field Preparations with Topcon Tools
Available in Eight Modules for office processing of field data
Data collection software for all Topcon products
Data transfer and conversion software
August 2009
Field Preparations with Topcon Tools
Compile Various Data Sets in Topcon Compile Various Data Sets in Topcon Tools in Preparation for the FieldTools in Preparation for the Field
August 2009
Field Preparations with Topcon Tools
http://www.ngs.noaa.gov/
August 2009
Field Preparations with Topcon Tools
http://www.ngs.noaa.gov/
August 2009
Field Preparations with Topcon Tools
http://www.ngs.noaa.gov/
August 2009
Datasheet Search on NGS WebsiteDatasheet Search on NGS Website• If you do not know the latitude / longitude of your project site, you
can open Google Earth freeware and enter in the land address.
• Right button click the push pin icon above your address and select Properties to see the address' geodetic position. For example:
...then back within the NGS website, you can use the Radial Search function to enter in a geodetic position.
• Notice that the NGS website requests that you enter in your location for a Radial Search as:
Topcon Positioning Systems7400 National DriveLivermore, CA 94550
37°42'12.14"N121°42'7.58"W
N374212W1214208
Field Preparations with Topcon Tools
August 2009
Field Preparations with Topcon Tools
NGS DatasheetsNGS Datasheets
File
Save As…
August 2009
Field Preparations with Topcon Tools
NGS DatasheetsNGS Datasheets
• After search results, go to File / Save As and save in an HTML webpage format.
• This is the file that will be imported into Topcon Tools office software.
August 2009
Field Preparations with Topcon Tools
NGS Datasheets in Topcon ToolsNGS Datasheets in Topcon Tools
August 2009
Field Preparations with Topcon Tools
NGS Datasheets in Topcon ToolsNGS Datasheets in Topcon Tools
August 2009
Field Preparations with Topcon Tools
NGS Datasheets in Topcon ToolsNGS Datasheets in Topcon Tools
August 2009
Field Preparations with Topcon Tools
NGS Datasheets in Topcon ToolsNGS Datasheets in Topcon ToolsAE6648 DESIGNATION AP STA B LVKAE6648 PID AE6648AE6648 STATE/COUNTY CA/ALAMEDAAE6648 *CURRENT SURVEY CONTROL___________________________________________________________________AE6648* NAD 83(2007) 37 41 39.38258(N) 121 49 30.79485(W) ADJUSTED AE6648* NAVD 88 114.00 (meters) 374.0 (feet) GPS OBS ___________________________________________________________________AE6648 ELLIP HEIGHT 81.710 (meters) (02/10/07) ADJUSTEDAE6648.The ellipsoidal height was determined by GPS observationsAE6648.and is referenced to NAD 83.AE6648.The geoid height was determined by GEOID03.AE6648; North East Units Scale FactorAE6648;SPC CA 3 633,368.802 1,883,133.161 MT 0.99992967AE6648;SPC CA 3 2,077,977.48 6,178,246.05 sFT 0.99992967AE6648;UTM 10 4,172,544.136 603,571.048 MT 0.99973212AE6648AE6648! Elev Factor x Scale Factor = Combined FactorAE6648!SPC CA 3 0.99998718 x 0.99992967 = 0.99991685AE6648!UTM 10 0.99998718 x 0.99973212 = 0.99971930
August 2009
Field Preparations with Topcon Tools
NGS Datasheets in Topcon ToolsNGS Datasheets in Topcon Tools
• Horizontal Datum = North American Datum of 1983 (NAD83)• Vertical Datum = North American Vertical Datum of 1988(NAVD 88)• Geoid Model = 2003 (available from NGS website)• Projection = State Plane Coordinate (SPC) System• State = California• State Plane Zone = 3
August 2009
Field Preparations with Topcon Tools
2003 2003 GeoidGeoid Model for Conterminous Model for Conterminous United StatesUnited States
Grid 01 Grid 02 Grid 03 Grid 04
Grid 05 Grid 06 Grid 07 Grid 08
• Each grid is 4.7 Mb in size.
August 2009
Field Preparations with Topcon Tools
NGS Datasheets in Topcon ToolsNGS Datasheets in Topcon Tools
August 2009
Field Preparations with Topcon Tools
PID Projection North East NAVD88 UnitsAE6648 SPC CA 3 633368.802 1883133.161 114.00 MT
AE6648 SPC CA 3 2077977.480 6178246.050 374.0 sFT
AE6648 UTM 10 4172544.136 603571.048 374.0 MT
Directly from NGS Data Sheet, Published Values for AE6648 - AP STA B LVK
Topcon Tools after Coordinate System Changed to Match NGS Data Sheet
Name Grid Northing (m) Grid Easting (m) Elevation (m) Note
AE6648 633368.802 1883133.161 114.000AP STA B LVK;HORZ
ADJUSTED VERT GPS OBS
Quick ComparisonQuick Comparison
August 2009
Any questions?Any questions?
August 2009
Field Preparations with Topcon Tools
Export to Device from Topcon ToolsExport to Device from Topcon Tools• The next step will be to export compiled data from
Topcon Tools to a TopSURV field controller.• Establish an ActiveSync connection first.• Then in Topcon Tools, go to Job / Export to
Device.
August 2009
Field Preparations with Topcon Tools
Export to Device from Topcon ToolsExport to Device from Topcon Tools• Within the Export to Device
window, navigate to where you want the resulting TopSURV job file to be.
• Ensure to declare a Format Name of TopSURV 7 Job (*.tsj).
• Declare a job name. For this example we will use from topcon tools. Click Save.
• Topcon Tools will automatically being compiling all points, line work, layers, colors, line types, codes, coordinate system / distance unit information, etc. into a TopSURV job (TSJ) format.
• Next step will be to open on the field controller and check.
August 2009
Field Preparations with Topcon Tools
Viewing in Google EarthViewing in Google Earth
August 2009
Field Preparations with Topcon Tools
Viewing in Google EarthViewing in Google Earth
August 2009
Field Preparations with Topcon Tools
Viewing in Google EarthViewing in Google Earth
August 2009
Export Google Earth (KMZ) FileExport Google Earth (KMZ) FileField Preparations with Topcon Tools
August 2009
Export Google Earth (KMZ) FileExport Google Earth (KMZ) FileField Preparations with Topcon Tools
• Now that you have exported your Topcon Tools job to a Google Earth (KMZ) file format, you have the option of viewing it within Google Maps on a Topcon GRS-1 receiver.
• Either copy / paste the resulting Google Maps KMZ file onto your GRS-1 via ActiveSync or place on a removable SD memory card.
August 2009
Field Preparations with Topcon Tools
Google Maps on a Topcon GRSGoogle Maps on a Topcon GRS--1 Receiver1 Receiver
• Once the Google Maps KMZ file is on your GRS-1 receiver, tap the Start button from the Windows Mobile desktop and select File Explorer.
• Navigate to your KMZ file and tap to automatically see all points in Google Maps freeware.
August 2009
Field Preparations with Topcon Tools
Google Maps on a Topcon GRSGoogle Maps on a Topcon GRS--1 Receiver1 Receiver
• Initially, you will see a listing of all points. You can either purposefully select the point that you’d like to work with or tap the See Map button to select graphically.
• You can also tap and drag on the screen to pan around as well as zoom in / out.
August 2009
Field Preparations with Topcon Tools
Google Maps on a Topcon GRSGoogle Maps on a Topcon GRS--1 Receiver1 Receiver
• For this example, we will work with the NGS monument, Point Identifier of DE8489.
• You can either Get Directions or tap the Street View option. This is what it looks like if you were standing over this NGS monument.
• Again, you can also tap and drag on the screen to pan around.
August 2009
Field Preparations with Topcon Tools
Common Work FlowCommon Work Flow
August 2009
Common Work FlowCommon Work FlowField Preparations with Topcon Tools
• Create a new job in Topcon Tools office software and compile multiple types of data (NGS Datasheets, local control, line work, ESRI Shape Files, etc.).
• Identify and fix problems with full keyboard and mouse comfort so as to not discover for first time while in the field.
• View in Google Earth for a “common sense” check as well.
August 2009
• From Topcon Tools, use Export to Device and send to field controller as a TopSURV job (TSJ format).
• Optional to also export all points from Google Earth as a KMZ file. Then transfer KMZ file to a Topcon GRS-1 receiver.
• Within File Explorer on GRS-1 receiver, tap KMZ file to view in Google Maps.
Common Work FlowCommon Work FlowField Preparations with Topcon Tools
August 2009
Field Preparations with Topcon Tools
TopSURV Data Collection SoftwareTopSURV Data Collection Software
• Launch TopSURV data collection software.• Select and Open job that was initially compiled and created in
Topcon Tools office software.• It is common to tap the Map icon to visually check that data came
across as intended.
August 2009
Field Preparations with Topcon Tools
TopSURV Data Collection SoftwareTopSURV Data Collection Software
• From the TopSURV main menu, tap the Edit Job icon then Points to see a listing of all points currently in the TopSURV field job.
• It is common to pause and select a random point within the TopSURV job to compare against what was initially in Topcon Tools and published on NGS Data Sheets. Cautious progression.
August 2009
Any questions?Any questions?
Field Preparations with Topcon ToolsField Preparations with Topcon Tools