Administration Post : Head of Department of Postgraduate Studies (May 2010-

Feb 2012) Faculty of Mechanical Engineering Universiti Teknologi Malaysia

Correspondence Address : Department of Thermo-Fluid Faculty of Mechanical Engineering Universiti Teknologi Malaysia 81310 UTM Johor Bahru, Johor, MALAYSIA

Telephone : +607 5534718 (off.), +6017 7541097 (mobile) Fax : +607 5566 169 Email : azwadi@fkm.utm.my Date and Place of Birth : 23rd September 1977, Kota Bharu, Kelantan, MALAYSIA Nationality : Malaysian Education/ Academic Qualification Sept 2004 – Apr 2007 : Ph.D. in Mechanical Engineering

Keio University, Japan (Lattice Boltzmann Method /Computational Fluid Dynamics)

Sept 2002 – Sept 2003 : M.Sc. in Thermal Power and Fluid Engineering University of Manchester Institute Science and Technology, U.K.

Apr 1997 – Apr 2001 : B.Eng. in Mechanical Engineering and Material Science Kumamoto University, Japan.

Academic Appointments

2008 – present : Senior Lecturer 2004 – 2007 : Lecturer 2001 – 2003 : Tutor

Prize/Award

2007 : Excellent Service Award, UTM 2011 : Excellent Service Award, UTM 2011 : Indexed Journal Publication Award

Dr. NOR AZWADI CHE SIDIK B.Eng. (Kumamoto Univ., Jpn), M.Sc. (UMIST, UK), Ph.D. (Keio Univ., Jpn) http://www.fkm.utm.my/~azwadi http://blog.fkm.utm.my/azwadi Field of Specialization: Computational Fluid Dynamics,

Computational Heat Transfer, Fluid Structure Interaction, Applied Modelling & Simulation

No. of Citation: 300 H-index: 9 (source: SCOPUS(Author ID:14042436200),June 2013)

2012 : Gold medal award, Industrial Art & Technology Exhibition.

International/National Level Committees/Members

Fellow member, Research Publication Center, Universiti Teknologi Malaysia, 1 Jun 2012-Present.

Committee Member, The 4th International Meeting on Advances in Thermo Fluid, Malacca, 2011, Malaysia.

Committee Member, The 10th Asian International Conference on Fluid Machinery, Kuala Lumpur, 21-23 Oct 2009, Malaysia.

Committee Member, The 1st International Meeting on Advances of Thermo Fluid, Johor, 26 Aug 2008, Malaysia.

Committee Member, 2011 Conference on Modelling and Simulation Committee Member, 2011 International Meeting on Advances in Thermo Fluid Co-chairman, 2011 Mechanical Engineering Postgraduate Conference, Universiti

Teknologi Malaysia Panel member, Program Ijazah Luar Negara, Jabatan Perkhidmatan Awam, 2011

Professional Qualification/Membership Board of Engineers, Malaysia. Member, International Association of Computer Science and Information Technology

(IACSIT), IEEE Member, World Academy of Science, Engineering and Technology

Administration Head, Department of Postgraduate Studies, Faculty of Mechanical Engineering, UTM,

2010 – 29 February 2012 Committee Member, Postgraduate Studies, University Teknologi Malaysia, 2010 - 29

February 2012 Committee Member, Postgraduate Studies, Faculty of Mechanical Engineering, UTM,

2008 – 29 February 2012. Committee Member, Undergraduate Project, Faculty of Mechanical Engineering,

UTM, 2007 – 31 October 2011. Committee Member, Journal Impact Factor, Faculty of Mechanical Engineering,

UTM, 2009 – 2011. Committee Member, Promotion Faculty, Faculty of Mechanical Engineering, UTM,

2008 – 2010. Committee Member, Facility Management, Faculty of Mechanical Engineering, UTM,

Mac 2011 – 28 February 2013. Panel Member, Academic Quality Award, UTM, 2010 Panel Member, Academic Quality Award, UTM, 2011 Panel Member, Academic Quality Award, UTM, 2012 Coordinator, Master of Engineering (Mechanical) by Taught Course, Faculty of

Mechanical Engineering, UTM, 2008 – 2009. Coordinator, Fluid Mechanics II, Faculty of Mechanical Engineering, UTM, 2007 –

2008. Coordinator, Fluid Mechanics II, Faculty of Mechanical Engineering, UTM, 2004 –

2005.

Teaching Experience Master of Engineering : Computational Fluid Dynamics (2 semesters) Computational Heat Transfer (1 semester) Advanced Engineering Mathematics (1 semester) Bachelor of Engineering : Computational Fluid Dynamics (3 semesters) Fluid Mechanics I (5 semesters) Fluid Mechanics II (6 semesters) Experimental Method (1 semester) External Program : Japanese Language (2 semesters)

Supervision Post-Doc : Shervin Sharafatmandjoor Ph.D. : 3 Student – completed Khalid Saqr (Co-supervisor) Munther Mussa (UKM Co-S) Saeed Jamei (Co-S) 12 students – in progress Mehaboob Basha Nasir Salim Aman Ali Khan Leila Jahanshaloo Sofiannuddin Ahmat Rajab Noor Afiq Ehsan Kianpoor Mohd Omar Azunaidi Siti Aisyah Razali Azhar Mohamad M.Eng. : 33 students – completed,

10 students – in progress Akmal Hamizi Shahin Farhana Mohammad Raad Abu Bakar Lee Yoke Keen Chan Tey Wah Yen B.Eng. : 25 students – completed, 0 students – in progress

Internal/External Thesis Examiner 1. Ahmad Shafarin Shafie (Master of Engineering(Mechanical)) 2. Hassan Ibrahim Hassan Mohamed Kassem (Master of Engineering(Mechanical))

Editor and Reviewer

Reviewer of submitted manuscript to 2007

Jurnal Mekanika (2) 2008 Jurnal Mekanika (1) International Journal of Modern Physics B (4) Journal of Applied Fluid Mechanics (3) International Meeting on Advances in Thermofluid (Head of reviewing

committee) 2009 Journal Mekanika (1) Journal of Applied Fluid Mechanics (2) International Conference on Computational Fluid Dynamics (2) National Conference in Mechanical Engineering for Research and

Postgraduate Student (1) 2010 Journal Mekanika (1) International Journal of Vehicle Design (1) Journal of Applied Science (2) International Journal of Automotive and Mechanical Engineering (2) Journal of Engineering Science and Technology (1) Asian International Conference on Fluid Machinery (Head of reviewing

committee) WSEAS Conference 2011 Journal Mekanika (1) International Journal of Energy & Technology (1) Journal of Engineering Science and Technology (4) Conference on Modelling and Simulation (4) Journal of Mechanical Engineering and Technology (2) WSEAS Conference 2012 Scientia Iranica (1) Journal of Engineering Science and Technology (4) Asian Journal of Applied Science (2) IEM Journal (2) Jurnal Teknologi (2) 2nd International Conference on Engineering and Technology Innovation (1) Journal of Applied Fluid Mechanics (1)

Journal of Heat Transfer (2) International Journal of Thermal Sciences (2) Computational Methods in Engineering Science and Mechanics (1) CFD Letters (1) Journal Mekanika (2) WSEAS Transactions on Mathematics (1) International Journal of Mechanical and Materials Science (1) 2013 Jurnal Teknologi (1) Theoretical Biology and Medical Modelling (1) Heat Transfer Asian Research (1) Eureca Conference, Taylor College (1)

Editor of the following Journal Jurnal Mekanikal (2009-present) Trends in Applied Sciences Research (2011-present)

Asian Journal of Scientific Research (2011-present) Research Journal of Physics (2009-2010)

Journal of Applied Science (2011-present) Asian Journal of Applied Sciences (2011-present)

CFD Letters (2009-present) Journal of Mechanical Engineering and Technology (2011-present) Current Research in Physics (2011-present) Jurnal Teknologi – Special Edition (Latest trends in Fluid Mechanics Exploration (2012)

Editor of the following Proceedings

2008 International Meeting on Advances in Thermofluid Asian International Conference on Fluid Machinery

Editor of the following Chapters in Book Advances in Applied Numerical Methods Latest Trend in Mechanical Engineering – part 1 Latest Trend in Mechanical Engineering – part 2

Speaker/Facilitator

1. Speaker, “Seminar kecemerlangan pelajar”, Malaysia Embasssy, Japan, 17 December 2006.

2. Speaker, “How to conduct Master Project”, Seminar Hall, Faculty of Mechanical Engineering, UTM, 18 August 2010

3. Facilitator, “Bengkel Pemurnian Program Sarjana Kejuruteraan (Aeronautik), Everly Hotel and Resorts, Malacca, Malaysia, 15-17 October 2010.

4. Facilitator, “Bengkel Pemurnian Program Sarjana Kejuruteraan (Automotif), Fakulti Kejuruteraan Mekanikal, Universiti Teknologi Malaysia, 19 April 2011.

5. Invited Speaker, Faculty of Mechanical Engineering Postgraduate Conference, 2011

6. Session Chairperson, 2011 International Meeting on Advances in Thermofluid, Malaysia

7. Session Chairperson, 15th WSEAS International Conference on Mathematical and Computational Methods in Science and Engineering, 2013

8. Speaker, One day workshop on Computational Fluid Dynamics Application, Wisma R & D Universiti Malaya, 29 June 2013.

Research Work

1. The development of finite different thermal lattice Boltzmann model — Project Leader. (2009-2010)

2. A study of fluid transport phenomenon over two tandem square cylinders — Project Leader. (2009-2010)

3. Lattice Boltzmann simulation of droplet motion on inclined surface – Project Leader, FRGS (1 October 2008 – 30 September 2010), RM54,000

4. Pulse detonation combustion for detonation purpose – Project Member 5. Simulation of two dimensional of droplet motion on inclined surface using

lattice Boltzmann method algorithm – Project Member 6. Development of RBD Palm stearin as lubricant in metal forming process –

Project Member 7. Biofuel project – Project member 8. Fluid flow through microchannel – Project member 9. Project leader, Design and development of dragchute for Malaysia aircraft,

Research University Grant 1 (1 April 2011 – 31 Mac 2013), RM128,000.00 10. Project leader, Numerical and experimental study of flow in urban street

canyon, FRGS (1 April 2012 – 31 mac 2014), RM 75,840.00 11. Project leader, Can lattice Boltzmann method predict the blood clotting

process? ERGS (15 Jun 2012 – 14 Jun 2014), 78,000.00 12. Project Leader, Computational and experimental study of flow dynamics in

electroless nickel plating process tank for hard drive manufacturing, SEAGATE INTL (JOHOR) SDN BHD, (May 2012-Sept 2012), RM15,800.

13. Project Leader, Numerical research on heat transfer enhancement using nanofluid, Research University Grant 2 (1 December 2012 – 31 December 2013), RM50,000.00

Publications

List of Journal Papers ISI Indexed only

1. N. A. C. Sidik, T. Tanahashi, “Simplified thermal lattice Boltzmann in incompressible limit”, International Journal of Modern Physics B, Vol. 20 (17), pp2437-2449, 2006. (IF 0.408)

2. N. A. C. Sidik, T. Tanahashi, “Three-dimensional thermal lattice Boltzmann simulation of natural convection in a cubic cavity”, International Journal of Modern Physics B, Vol. 21 (1), pp87-96, 2007. (IF 0.408)

3. N. A. C. Sidik, T. Tanahashi, “Simplified finite difference thermal lattice Boltzmann method”, International Journal of Modern Physics B, Vol. 22 (22), pp3865-3876, 2008. (IF 0.408)

4. N. A. C. Sidik, Munther Mussa, S. Abdullah, N. Muhammad, “Simulation of natural convection heat transfer in an enclosure by the lattice Boltzmann method”, Computers & Fluids,Vol. 44(1), 162-168. 2011 (IF1.270)

5. S. Syahrullail, B. M. Zubil, C. S. N. Azwadi, M. J. M. Ridzuan “Experimental evaluation of palm oil as lubricant in cold forward extrusion process” International Journal of Mechanical science, Vol. 53(7), pp549-555, 2011 (IF 1.266)

6. N. A. C. Sidik, S. M. R. Attarzadeh “The use of cubic interpolation method for transient hydrodynamics of solid particle” International Journal of Engineering Science, Vol. 51, pp90-103, 2012 (IF 1.194)

7. Nor Azwadi and Idris Mat Sahat “Finite difference and cubic interpolated profile lattice Boltzmann method for prediction of two-dimensional lid-driven shallow cavity flow” Arabian Journal of Science and Engineering, Vol. 37(4), pp1101-1110, 2012. (IF 0.224).

8. Saeed Jamei, Adi Maimun, Nor Azwadi and Suhaimi Mansor “Numerical Investigation on Aerodynamic Characteristics of a Compound Wing in Ground Effect” Journal of Aircraft, Vol. 49(5), pp1297-1305, 2012 (IF0.552).

9. Nor Azwadi and Fudhail Abdul Munir “Mesoscale Numerical Prediction of Fluid Flow in a Shear Driven Cavity” Arabian Journal of Science and Engineering,Vol. 37, pp1723-1735, 2012 (IF0.224)

10. Nor Azwadi Che Sidik, Arman Safdari, “Comments on: “Lattice Boltzmann Simulation of Alumina-water Nanofluid in a Square Cavity” by Yurong He, Cong Qi, Yanwei Hu, Bin Qin, Fengchen Li and Yulog Ding (Nanoscale Research Letters 2011, 6:184)”, Nanoscale Research Letters, Vol. 7, pp648-650, 2012 (IF 2.726).

11. Nor Azwadi Che Sidik, M. Zeinali, A. Safdari and A. Kazemi, “Adaptive Network Based Fuzzy Inference System Analysis to predict the temperature and flow fields in Lid-Driven Cavity”, Numerical Heat Transfer, Part A Application, Vol. 63, n. 12, 906-920, 2013. (IF 2.492).

12. Nor Azwadi Che Sidik, M. Basha, “Regularized lattice Boltzmann simulation of laminar mixed convection in entrance region of 2D channels”, Numerical Heat Transfer, Part A Application, Vol. 63, n. 11, 867-878, 2013. (IF 2.492).

13. S. Syahrullail, Nor Azwadi Che Sidik, Y. M. Najib, “The influences of the die half angle of taper die during cold extrusion process”, The Arabian Journal for Science and Engineering, 38, 1201-1207, 2013. (IF 0.243)

14. Nor Azwadi Che Sidik, Mehran Salehi, “Eulerian-Lagrangian numerical scheme for contaminant removal from different cavity shapes”, The Arabian Journal for Science and Engineering, Accepted for publication. (IF 0.243)

15. Shervin Sharafatmandjour, Nor Azwadi Che Sidik, Sabetghadam, “A least squared based immersed boundary approach for the complex boundaries in lattice Boltzmann Method”, Numerical Heat Transfer Part B- Fundamental, Accepted for publication. (IF 2.054)

16. Ehsan Kianpour, Nor Azwadi Che Sidik, Mohsen Agha Seyyed Mirza Bozorg, “Thermodynamics analysis of flow field at the end of combustor simulator” International Journal of Heat and Mass Transfer, 61, 389-396, 2013. (IF 2.407)

17. Nor Azwadi Che Sidik, Maysam Khakbaz, Leila Jahanshaloo, Syahrullail Samion and Amer Nordin Darus, “Simulation of Forced Convection in a Channel with Nanofluid by the Lattice Boltzmann Method”, Nanoscale Research Letters, 8, 178, 2013 (IF 2.726).

18. Leila Jahanshaloo, Emad Kermani and Nor Azwadi Che Sidik, “A review on application of lattice Boltzmann method for turbulent flow simulation”, Numerical Heat Transfer, Part A Application, Accepted for publication. (IF 2.492).

19. Shervin Sharafatmandjoor, Nor Azwadi Che Sidik, F. Sabetghadam, “Analysis of applicability of the lattice Boltzmann method in targeting a chaotic flame front model”, Numerical Heat Transfer, Part A Application, Accepted for publication. (IF 2.492).

20. Afiq Witri, Nor Azwadi Che Sidik, Khaled Saqr and Salim Mohamad Salim, “A review on the flow structure and pollutant dispersion in urban street canyon” SIMULATION, Accepted for publication with minor correction. (IF 0.793)

SCOPUS indexed (Not included ISI) 21. N. A. C. Sidik, A. R. M. Rosdzimin, "Cubic-interpolated-pseudo-particle thermal

BGK lattice Boltzmann numerical scheme for solving incompressible thermal fluid flow problem", Malaysian Journal of Mathematical Science, Vol. 3, No. 2, 2009.

22. N. A. C. Sidik, S. Syahrullail "A three-dimension double-population thermal lattice BGK model for simulation of natural convection heat transfer in a cubic cavity", WSEAS Transaction in Mathematics, Vol. 8, No. 9, 2009, pp. 561.

23. N. A. C. Sidik “Prediction of Natural Convection in a Square Cavity with Partially Heated from below and Symmetrical Cooling from sides by the Finite Difference Lattice Boltzmann Method", European Journal of Scientific Research, Vol. 35, No. 3, 2009, pp. 347-354.

24. N. A. C. Sidik, M. Rosdzimin and M. Hussein Al Mola “Constrained Interpolated Profile for Solving BGK Boltzmann Equation", European Journal of Scientific Research, Vol. 35, No. 4, 2009, pp. 559-569.

25. N. A. C. Sidik “A 3D lattice BGK Scheme for Simulation of Thermal Flow in Cubic Cavity", European Journal of Scientific Research, Vol. 37, No. 1, 2009, pp. 49-57.

26. S. Syahrullail, N. A. C. Sidik and W. B. Seah "Plasticity analysis of pure aluminium extruded with an RBD palm olein lubricant", Journal of Applied Science, Vol. 9, No. 19, 2009, pp. 3581-3586.

27. N. A. C. Sidik and A. R. M. Rosdzimin “Mesoscale investigation of natural convection heat transfer from a heated cylinder inside square enclosue", European Journal of Scientific Research, Vol. 38, No. 1, 2009.

28. N. A. C. Sidik and S. A. Osman "UTOPIA finite different lattice Boltzmann method for simulation natural convection heat transfer from a heated concentric annulus cylinder", European Journal of Scientific Research, Vol. 38, No. 1, 2009.

29. Syahrullail S., N. A. C. Sidik, M.J.M. Ridzuan and Seah W.B, “The effect of lubricant viscosity in cold forward plain plain strain extrusion test”, European Journal of Scientific Research, Volume 38(4), 2009, pp. 545-555.

30. N. A. C. Sidik, M. Y. Mohd Fairus and S. Samion “Virtual study of natural convection heat transfer in an inclined square cavity", Journal of Applied Science, 10(4), 331-336. 2010

31. N. A. C. Sidik and M. Irwan “Macro-and meso-scale simulations of free convective heat transfer in a Finite different cavity at various aspect ratio", Journal of Applied Science, 10(3), 203-208. 2010

32. N. A. C. Sidik and S. M. Idris “Finite different and lattice Boltzmann modelling for simulation of natural convection in a square cavity", International Journal of Mechanical and Material Engineering, 5(1), 80-86. 2010

33. N. A. C. Sidik, Khalid Saqr and M. A. Wahid “Theoretical notes on the mathematical modelling of gaseous detonation using Boltzmann equation", Journal of Applied Science, 10(14), 1476-1480. 2010

34. N. A. C. Sidik and Idris Mat Sahat, “Mesoscale numerical approach to predict macroscale fluid flow problem", Journal of Applied Science, 10(15),1511-1524. 2010

35. N. A. C. Sidik and N. I. N. Ibrahim “Mesoscale Simulation of Natural Convection in an inclined square cavity", WSEAS Transaction on Mathematics, 9(6), 417-426. 2010

36. N. A. C. Sidik and M. I. M. Azmi “Simplified Mesoscale Lattice Boltzmann Numerical Model for Prediction of Natural Convective Heat Transfer in a Square Geometry filled with Porous Media", WSEAS Transaction on Fluid Mechanics, 5(3), 186-195. 2010

37. N. A. C. Sidik, A. M. Adi Maimun, A. Priyanto, S. Jameei “Aerodynamics Characteristics of Wing of WIG Catamaran vehicle During Ground Effect", WSEAS Transaction on Fluid Mechanics, 5(3), 196-205. 2010

38. N. A. C. Sidik, N. C. Horng, M. Mussa and S. Abdullah “Simulation of rarefied gas flow in slip and transitional regimes by the lattice Boltzmann method", CFD Letters, 2(2), 66-74. 2010

39. N. A. C. Sidik and M. R. M. Zin, “An accurate numerical method to predict fluid flow in a shear driven cavity”, International Review of Mechanical Engineering, 4(6). 2010

40. N. A. C. Sidik and M. Z. M. Rody “Modelling of dynamics of the droplet using lattice Boltzmann method", International Journal of Mechanical and Material Engineering. 5(2), 276-281. 2010

41. N. A. C. Sidik, S. Samion “Virtual investigation of plume behaviour from a heated eccentric cylinder", International Journal of Mechanical and Material Engineering. 5(2), 129-135. 2010

42. N. A. C. Sidik, M. I. M. Azmi and M. Goudarzi, “Numerical Investigation of Incompressible Fluid Flow through Porous Media in a Lid-Driven Square Cavity", American Journal of Applied Science. 7(10), 1341-1344, 2010

43. N. A. C. Sidik, N. M. I. Nik Ibrahim and F. A. Munir, “Numerical simulation of natural convection in an inclined square cavity”, Journal of Applied Science, 11(2), 373-378. 2011

44. N. A. C. Sidik and S. Samion, “The effect of tool surface roughness in cold work extrusion”, Journal of Applied Science, 11(2), 367-372. 2011

45. N. A. C. Sidik, S. Syahrulail and T. C. Ing, “The metal flow evaluation of billet extruded with RBD palm stearin” International Review of Mechanical Engineering, 5(1), 21-27. (2011)

46. N. A. C. Sidik and S. M. R. Attarzadeh “An accurate numerical prediction of solid particle fluid flow in a lid-driven cavity” International Journal of Mechanics 5 (3), 123-128. (2011)

47. M. Munther, S. Abdullah, N. A. C. Sidik, R. Zulkifli “Lattice boltzmann simulation of cavity flows at various reynolds numbers” International Review on Modelling and Simulations 4(4), 1909-1919. (2011)

48. N. A. C. Sidik, W. L. Koh “Prediction of supersonic flow over compression corner” Journal of Applied Science, 11(19), 3397-3404

49. N. A. C. Sidik and Leila Jahanshaloo “Prediction of dynamics of solid particles using lattice Boltzmann method” International Review of Mechanical Engineering, 5(7), 1235-1240

50. A. M. Fudhail, Mohd Irwan, Mohd Rody, Nor Azwadi, Azli “Application of lattice Bolztmann method for lid-driven cavity flow” International Review of Mechanical Engineering, 5(5), 856-861

51. N. A. C. Sidik, G. Masoud and Afiq Witri “Prediction of the dynamics of droplet on solid surface using lattice Boltzmann method” International Review of Mechanical Engineering, 5(7), 1241-1245

52. A. M. Fudhail, Mohd Rody, Nor Azwadi and Azli Salim “Accurate numerical prediction of incompressible fluid flow in lid driven cavities” Applied Mechanics and Materials 110, 4365-4372. (2012)

53. M. Irwan and Nor Azwadi “Numerical prediction of natural convection heat transfer through porous media by the lattice Boltzmann Method” Applied Mechanics and Materials 110, 4439-4444. (2012)

54. Nor Azwadi, M. Reza Attarzadeh and F. Haghbin “Cubic-Interpolated-Pseudo-Particle Method to Predict Dynamic Behaviour of Fluid in Shear Driven Cavity” Applied Mechanics and Materials 110, 377-384. (2012)

55. Mehran Salehi, Nor Azwadi Che Sidik, “Prediction of flow characteristics in stenotic artery using CIP Scheme” International Journal of Materials and Mechanical Engineering, 7, 101-106

56. Nor Azwadi and Fudhail Abdul Munir “Lattice Boltzmann Numerical Prediction of Fluid Flow in Various Shapes of Shear Driven Cavity” International Review of Mechanical Engineering, 6(3), 565-573

57. Nor Azwadi, Mehran Salehi, Adrian Syah “Cubic Interpolation Profile Method For Transient Hydrodynamics of Solid Particles in Enclosure” International Review of Mechanical Engineering, 6(3), 557-564

58. Nor Azwadi Che Sidik and Nik Izual Nik Ibrahim “Numerical investigation of fluid and thermal flow in a differentially heated side enclosure walls at various inclination angles” CMES: Computer Modeling in Engineering & Sciences, 84(6), 559-574.

59. Ali Akbari, Arman Safdari, Poortousi, Nor Azwadi Che Sidik, “Prediction of particle dynamics in Lid-driven cavity flow” International Review of Modelling and Simulation, 5(3), 1344-1347

60. Mehran Salehi, Nor Azwadi Che Sidik, “Numerical Prediction of Mixed Convection Heat Transfer in an Enclosure” International Review of Modelling and Simulation, 5(3), 1339-1343

61. Mehran Salehi, Nor Azwadi Che Sidik, “Numerical Simulation of Flow over Semicircular Cavity” International Review of Modelling and Simulation, 5(3), 1335-1338

62. Nor Azwadi Che Sidik, Leila Jahanshaloo, “Lattice Boltzmann numerical scheme for transient hydrodynamics of solid particles in an enclosure” CFD Letters, 4(3), 102,111

63. Nor Azwadi Che Sidik and Godarzi Masoud, “Solution to Natural Convection Heat Transfer by Two Different Approaches: Navier Stokes and Lattice Boltzmann” International Review of Mechanical Engineering, 6(4), 705-711

64. Afiq Witri, Nor Azwadi Che Sidik, Khalid Saqr, “Effects of buildings aspect ratio, wind speed and wind direction on flow structure and pollutant dispersion in symmetric street cantons: A review” International Journal of Materials and Mechanical Engineering, 7(2), 158-165

65. Arman Safdari, Emad Kermani, Nor Azwadi, “Simulation of mixed convection around a square by using LBM” Applied Mechanics and Materials, 229, 2145-2149.

66. Arman Safdari, Ali Akbari, Poortoosi, Nor Azwadi, “Numerical Investigation of Unsteady Laminar in Oscillated Lid-Driven Cavity Flow” Jurnal Teknologi, 58, 13-17

67. Ehsan Kianpour, Nor Azwadi Che Sidik, Agha Mohsen, “ Dynamic analysis of flow fields at the end of combustor simulator” Jurnal Teknologi, 58, 5-12

68. E. Kianpour, Nor Azwadi, Mohsen Agha, “Thermodynamic analysis of flow field at the end of combustor simulator”, Applied Mechanics and Materials, 225, 261-266.

69. Nor Azwadi, Mohd Irwan, “Mesoscale numerical method for prediction of thermal fluid flow through porous media” WSEAS Transactions of Heat and Mass Transfer, 7(1), 11-15, 2012.

70. Nor Azwadi Che Sidik, Arman Safdari, Ali Akbari, “Particles collisions in shear driven cavity flow”, International Review on Mechanical Engineering, 6(7), 1648-1653.

71. Nor Azwadi Che Sidik, Aman Ali Khan, Akmal Hamizi Manshor, Arman Safdari, Leila Jahanshaloo, “Predictions of flow over cavities by multi-relaxation time lattice Boltzmann method”, International Review on Mechanical Engineering, 6(7), 1661-1666.

72. Saeed Jamei, Nor Azwadi, Adi Maimun, Shuhaimi Mansur, Agoes Priyanto, “Aerodynamic Characteristics of Rectangular-Wing with Reverse Taper Wing and Anhedral Angle in Ground Effect”, International Review on Mechanical Engineering, 6(7), 1521-1528.

73. Nor Azwadi, H. Al-Mola, S. Agus, “Numerical Investigation on Shear Driven Cavity Flow by the Constrained Interpolated Profile Lattice Boltzmann Method”, WSEAS Transaction on Mathematics, 12(4), 426-435, 2013.

74. Mehaboob Basha, C. S. Nor Azwadi, “Regularized lattice Boltzmann simulation of laminar natural convection in entrance region of 2D channel” Applied Mechanics and Materials, 307, 267-270, 2013.

75. Ali Akbari, Arman Safdari, Nor Azwadi, “Numerical prediction of heat transfer from localized heating in enclosure using CIP method” Applied Mechanics and Materials, 315, 512-516, 2013.

76. Nor Azwadi, Arman Safdari, “Numerical Investigation of 2-D Free Convection of Nanofluid in L-Shaped Enclosure” Applied Mechanics and Materials, 315, 433-437, 2013.

77. Afiq Witri, Nor Azwadi, “Prediction of the Flow Around a Surface-Mounted Cube using Two-Equation Turbulence Models” Applied Mechanics and Materials, 315, 438-442, 2013.

78. Emad Kermani, Arman Safdari, Nor Azwadi, “Numerical prediction of heat transfer from heated thin plate in a square cavity by using LBM” Applied Mechanics and Materials, 315, 531-535, 2013.

79. Nor Azwadi Che Sidik and Syahrullail Samion, “Cubic Interpolation Profile Method for Prediction of Thermal Fluid Flow through Porous Media” International Review on Mechanical Engineering, 7 (3), 563-569, 2013.

80. Nor Azwadi Che Sidik and Ehsan Kianpour, “Dynamic and Thermodynamic Analysis of Film-Cooling” International Review on Mechanical Engineering, 7 (3), 570-577,2013.

81. Nor Azwadi Che Sidik, Razaghian, Poortousi and Arman Safdari, “Numerical prediction of free convection in an open ended enclosure using lattice Boltzmann numerical method” International Journal of Materials and Mechanical Engineering, 8 (1), 58-62, 2013.

82. Nor Azwadi Che Sidik, Javad Ghaderian, Sakineh Sadeghipour, “Simulation of turbulent flow over a backward facing step using lattice Boltzmann Method”, Journal of Engineering, Science and Technology, 8, 2013.

83. Nor Azwadi, Leila Jahanshaloo “Computational analysis of particulate flow in expansion channel” American Journal of Applied Science, 10(4), 388-394,2013

84.

Non Indexed 85. N. A. C. Sidik, T. Tanahashi, “The development of thermal lattice Boltzmann models

incompressible limit”, Journal of Fundamental Science, Vol. 3, pp193-202, 2007. 86. N. A. C. Sidik, T. Tanahashi, “Two-phase flow simulation with lattice Boltzmann

method”, Jurnal Mekanika, Vol. 24 pp68-79, 2007. 87. N. A. C. Sidik, T. Tanahashi, "Development of 2D and 3D double population thermal

lattice Boltzmann models", MATEMATIKA, Vol 24(1), pp53-66, 2008. 88. N. A. C. Sidik, K. Osman, A. Z. Khudzairi and Z. Ngali, “Numerical investigation of

lid-driven cavity flow based on two different methods; lattice Boltzmann and splitting method”, Jurnal Mekanikal, Vol. 25 pp1-8, 2008.

89. N. A. C. Sidik, A. R. M. Rosdzimin, "Simulation of natural convection heat transfer in an enclosure using lattice Boltzmann method", Jurnal Mekanikal, Vol. 27 pp42-50, 2008.

90. N. A. C. Sidik, “Lattice Boltzmann simulation of natural convection and fluid flow around a heated cylinder in a enclosed square", Journal of Materials Science and Engineering, Vol. 3, No. 8, 2009, pp.44-48.

91. N. A. C. Sidik and C. H. Ng “Lattice Boltzmann modelling of microchannel flow", Journal of Material Science and Mechanical Engineering, Vol. 3, No. 12, 2009, pp.1-6.

92. N. A. C. Sidik and Syahrullail Samion, “Lattice Boltzmann numerical prediction of the flow behaviour downstream of cylinder blockage at various Reynolds numbers”, International Journal of Mechanical System Science and Engineering, Volume 1, 2009, pp. 7-11.

93. A. R. M. Rosdzimin, S. M. Zuhairi and N.A.C. Sidik, "Simulation of mixed Convection Heat Transfer using Lattice Boltzmann Method", International Journal of Automotive & Mechanical Engineering, 2, 130-143. 2010

94. N. A. C. Sidik and T. Tanahashi, “A three-dimension double population thermal lattice BGK model for simulation of natural convection heat transfer in a cubic cavity”, MATEMATIKA, 26(2), 157-165, 2010.

95. N. A. C. Sidik, M. S. Nor Hamizan and N. M. Ammar, “Assessment of lattice Boltzmann simulation scheme in predicting two phase (solid-fluid) flow”, Jurnal Mekanikal, 31, 11-16, 2010.

96. N. A. C. Sidik and M. I. M. Azmi, “An accurate numerical prediction of fluid flow through porous media”, Intl Journal of Geology, 4(2), 36-40, 2010.

97. N. A. C. Sidik, M. Z. M. Rody, M. A. Salim, A. M. Fudhail and M. Z. Hassan, “Numerical study of droplet dynamics on solid surface”, Journal of Mechanical Engineering and Technology, 2(2), 91-100, 2010

98. Fudhail Abdul Munir and Nor Azwadi “Numerical Simulation of flow behavior in shear driven cavity at High Reynolds number” IIUM Engineering Journal, 12(6) 97-103.

99. Nor Azwadi and Mehran Salehi “Eulerian Lagrangian numerical scheme for contaminant removal from cavity in horizontal channel” Advanced Science Engineering and Medicine 4, 432-437. (2012).

100. Naser Hassen, Nor Azwadi Che Sidik, Jamaluddin Sheriff “Effect of nozzle type, angle and pressure on spray volumetric distribution of broadcasting and banding

application” Journal of Mechanical Engineering Research, Vol. 5(4), pp. 76-81, April 2013

List of Proceeding Papers 2005

1. N. A. C. Sidik, T. Tanahashi, “Numerical simulation of laminar flow over a backward-facing step geometry for various expansion ratio using lattice Boltzmann method”, Proceeding, 19th Japan Symposium on Computational Fluid Dynamics, 13-15 Dec. 2005, Tokyo, Japan.

2006 2. N. A. C. Sidik, T. Tanahashi, “Simplified thermal lattice Boltzmann in incompressible

limit”, Proceeding, 11th Asian Congress of Fluid Mechanics, 22-25 May. 2006, Kuala Lumpur, Malaysia.

3. N. A. C. Sidik, T. Tanahashi, “Laminar flow over a backward-facing step geometry for various expansion ratio using lattice Boltzmann method”, Proceeding, 11th Asian Congress of Fluid Mechanics, 22-25 May. 2006, Kuala Lumpur, Malaysia.

4. N. A. C. Sidik, T. Tanahashi, “Simplified thermal lattice Boltzmann model for simulation of thermal flow in incompressible limit”, Proceeding, 17th International Symposium of Transport Phenomena, 4-8 Sept. 2006, Nagoya, Japan.

5. N. A. C. Sidik, T. Tanahashi, H. Noguchi, “Three-dimensional thermal lattice Boltzmann simulation of natural convection in a cubic cavity”, Proceeding, 20th Japan Symposium on Computational Fluid Dynamics, 13-15 Dec. 2006, Osaka, Japan.

2007 6. N. A. C. Sidik, T. Tanahashi, “Development of 2-D and 3-D double population

thermal lattice Boltzmann models”, Proceeding, 2nd International Conference on Mathematical Science, 28-29 May, 2007, Johore, Malaysia.

7. N. A. C. Sidik, T. Tanahashi, H. Noguchi, “Simplified finite difference thermal lattice Boltzmann method”, Proceeding, 18th International Symposium of Transport Phenomena, 27-30 Aug. 2007, Daejeon, Korea.

8. N. A. C. Sidik, T. Tanahashi, “A three-dimensional double population thermal lattice Boltzmann model”, Proceeding, 18th International Symposium of Transport Phenomena, 27-30 Aug. 2007, Daejeon, Korea.

9. N. A. C. Sidik, “Finite difference incompressible lattice Boltzmann model for the simulation of 2-D lid-driven cavity flow”, Proceeding, Engineering, Mathematics and Architecture Regional Conference, 27-28 Nov. 2007, Kuala Lumpur, Malaysia.

10. N. A. C. Sidik, K. Osman, A. Z. Khudzari, M. Z. Ngali, “Solution to Navier-Stokes equation for cavity problem; Comparisons between lattice Boltzmann and splitting method”, Proceeding, Engineering, Mathematics and Architecture Regional Conference, 27-28 Nov. 2007, Kuala Lumpur, Malaysia.

11. N. A. C. Sidik, “Incompressible finite difference double population thermal lattice Boltzmann method”, Proceeding, 1st Engineering conference on Energy and Environment, 27-28 Dec. 2007, Sarawak, Malaysia.

2008 12. N. A. C. Sidik, “Lattice Boltzmann simulation of natural convection in a square cavity

with partially heated from below and symmetrical cooling from sides”, Proceeding, International Conference on Mechanical and Engineering 2008, 21-23 May. 2008, Johor, Malaysia.

13. N. A. C. Sidik, J. M. Sheriff, K. Osmann and F. Zawawi, “Fluid transport phenomena over a rectangular cylinder in channel flow”, Proceeding, International Conference on Mechanical and Engineering 2008, 21-23 May. 2008, Johor, Malaysia.

14. N. A. C. Sidik and M. F. Hassan, “Lattice Boltzmann scheme on natural convection heat transfer from a heated cylinder in a square enclosure”, Proceeding, Regional Annual Fundamental Science Seminar 2008, 27-29 May. 2008, Johor, Malaysia.

15. N. A. C. Sidik, “Study of the effect of time relaxation BGK lattice Boltzmann collision model on the speed on convergence”, Proceeding, Regional Annual Fundamental Science Seminar 2008, 27-29 May. 2008, Johor, Malaysia.

16. N. A. C. Sidik, A. R. M. Rosdzimin, M. A. Mussa and S. Abdullah, “Numerical simulation of deep lid-driven cavity flow using lattice Boltzmann method”, Proceeding, International Meeting on Advances in Thermo Fluid, 26 August. 2008, Johor, Malaysia.

17. A. R. M. Rosdzimin and N. A. C. Sidik, “Simulation of natural convection in square cavity with localized heating using lattice Boltzmann method”, Proceeding, International Meeting on Advances in Thermo Fluid, 26 August. 2008, Johor, Malaysia.

18. Munther A. Mussa, Sharir Abdullah, Nor Azwadi, M. Rosdzimin and Norhamidi Muhamad, “Numerical simulation of shallow lid-driven cavity flow using lattice Boltzmann method”, Proceeding, Engineering Postgraduate Conference, 21-22 October. 2008, Selangor, Malaysia.

19. N. A. C. Sidik, A. R. M. Rosdzimin, “Study of flow pattern and heat transfer mechanism form a heated cylinder inside square enclosure at various Rayleigh numbers”, Proceeding, 3rd Brunei International Conference on Engineering and Technology, 3-5 November. 2008, Bandar Sri Begawan, Brunei.

20. N. A. C. Sidik, “Lattice Boltzmann simulation of natural convection and fluid flow around a heated cylinder in a enclosed square”, Proceeding, 9th International Heat Pipe Symposium, 18-20 November. 2008, Selangor, Malaysia.

21. M. A. Mussa, S. Abdullah, N. A. C. Sidik and N. Muhamad, “Numerical Simulation of Lid-driven cavity flow using the lattice Boltzmann method”, Proceeding, WSEAS Conference on Applied Mathematics, December. 2008, Spain.

22. M. Z. M. Rody and N. A. C. Sidik, “Study of flow pattern around two cylinders in tandem arrangement ”, Proceeding, Intl. Graduate Conference on Engineering and Sciences, 25-27 December. 2008, Johor , Malaysia.

23. H. M. Faizal and N. A. C. Sidik, “Initial study on flow behavior around four circular cylinders with different Reynolds number by using lattice Boltzmann scheme”, Proceeding, Intl. Graduate Conference on Engineering and Sciences, 25-27 December. 2008, Johor, Malaysia.

24. N. M. Akmal, N A. C. Sidik and M. S. Zuhairi, “Laminar flow through a double elbow geometry with lattice Boltzmann numerical method ”, Proceeding, Intl. Graduate Conference on Engineering and Sciences , 25-27 December. 2008, Johor, Malaysia.

25. A. R. M. Rosdzimin, N. A. C. Sidik and M. S. M. Syahar “CIP-LBM Scheme for the Simulation of Natural Convection in enclosure with localised heating”, Proceeding, Intl. Graduate Conference on Engineering and Sciences , 25-27 December. 2008, Johor, Malaysia.

26. M. S. Zuhairi, N. A. C. Sidik and N. M. Akmal “Simulation of two bubbles rise in cavity with Lattice Boltzmann method”, Proceeding, Intl. Graduate Conference on Engineering and Sciences , 25-27 December. 2008, Johor, Malaysia.

27. M. M. Mazwan and N. A. C. Sidik, “Study on the effect of stent strut parameters in aneurysm model to blood flow behavior”, Proceeding, Intl. Graduate Conference on Engineering and Sciences , 25-27 December. 2008, Johor, Malaysia.

2009 28. N. A. C. Sidik and Shahrul Azmir Osman, “An initial study of coupled finite element

lattice Boltzmann simulation scheme”, Proceeding, 3rd South East Asian Technical University Consortium (SEATUC) Symposium, 25-26 Feb. 2009, Johor, Malaysia.

29. N. A. C. Sidik and Syahrullail Samion, “Lattice Boltzmann numerical prediction of the flow behaviour downstream of cylinder blockage at various Reynolds numbers”, Proceeding, World Academy of Science, Engineering and Technology, Volume 38, February 2009.

30. S. Syahrullai, M. B. Zubil, N. A. C. Sidik and M. J. M. Ridzuan, “The evaluation of friction effect of RBD palm stearin as cold metal forming lubricant”, Proceeding, National Tribology Conference 2009, 4-5 May, Kuala Lumpur.

31. Khalid Saqr, Hossam Aly, N. A. C. Sidik and Yehia ElDrainy, “Uncharacteristic phenomenon in the nonisothermal Taylor Couette Flow”, Proceeding, 2009 International Conference on Signal Processing Systems, 15-17 May, Singapore.

32. N. A. C. Sidik, Rosdzimin, A. R. and S. M. Zuhairi, “Study of plume behavior from a two heated cylinders at high Rayleigh number using lattice Boltzmann method”, Proceeding, Asian International Conference on Fluid Machinery, Kuala Lumpur, October 2009.

33. N. A. C. Sidik, Munter, M and Shahrir, A, “Cubic interpolated pseudo particle lattice Boltzmann method for simulation of natural convection heat transfer in an enclosure”, Proceeding, Asian International Conference on Fluid Machinery, Kuala Lumpur, October 2009.

34. N. A. C. Sidik and Agus, S., “Numerical investigation of shallow lid-driven cavity flow by the constrained interpolated profile lattice Boltzmann method”, Proceeding, Asian International Conference on Fluid Machinery, Kuala Lunpur, October 2009.

35. N. A. C. Sidik and Fudhail, A. M, Efficient Mesh system for lid-driven cavity flow”, Proceeding, International Meeting on Advanced Thermofluid, Bogor, Indonesia, November 2009.

36. N. A. C. Sidik and Fudhail, A. M, Study of flow behaviour in triangular cavity”, Proceeding, International Meeting on Advanced Thermofluid, Bogor, Indonesia, November 2009.

37. N. A. C. Sidik and Faizal, H. M, Reduction of time consumption for simulating lid-driven cavity flow using lattice Boltzmann method”, Proceeding, International Meeting on Advanced Thermofluid, Bogor, Indonesia, November 2009.

38. N. A. C. Sidik and Shahrul, A. O., Virtual Investigation of free convection from concentric annulus cylinder by the finite difference lattice Boltzman method”, Proceeding, International Meeting on Advanced Thermofluid, Bogor, Indonesia, November 2009.

39. N. A. C. Sidik and Ammar, N. M, A Study of transient flow in a lid-driven cavity flow”, Proceeding, International Meeting on Advanced Thermofluid, Bogor, Indonesia, November 2009.

2010 40. N. A. C. Sidik and Shahrul Azmir Osman, “Lattice BGK computational method for

Solving Natural Convection Heat Transfer from a Heated Non-Concentric Annulus Cylinder”, Proceeding, 2nd Intl Conference on Computer Engineering and Applications, 19-21 March. 2010, Bali, Indonesia.

41. N. A. C. Sidik and A. Sujatmoko, “Mesoscale Computational Approach for Shear Driven Cavity Flow”, Proceeding, 2nd Intl Conference on Computer Engineering and Applications, 19-21 March. 2010, Bali, Indonesia.

42. A. Maimun, Saeed Jameei, A. priyanto and N. A. C. Sidik, “Influence of twin hull geometry on aerodynamics characteristics of WIG Catamaran duing ground effect”, Proceeding, WSEAS, Application of Computer engineering, 23-25 March. 2010, Penang, Malaysia.

43. N. A. C. Sidik and N. I. N. Ibrahim, “Mesoscale simulation of natural convection in an inclined square enclosure”, Proceeding, WSEAS, Application of Computer engineering, 23-25 March. 2010, Penang, Malaysia.

44. N. A. C. Sidik and M. I. M. Azmi, “Simplified Mesoscale porous media model for natural convective heat transfer in a square geometry”, Proceeding, WSEAS, Application of Computer engineering, 23-25 March. 2010, Penang, Malaysia.

45. N. A. C. Sidik and Munther, “Cubic-interpolated-pseudo-particle lattice Boltzmann method for simulation of natural convection heat transfer in an enclosure with different aspect ratios." Proceeding, 2nd International Conference on Computer and Automation Engineering, Singapore.

46. N. A. C. Sidik and Idris. M. S, “Numerical investigation of 2D lid-driven cavity flow by the non-uniform finite different method", Proceeding, National Conference in Mechanical Engineering for Research and Postgraduate Studies, 26 May, Kuantan, Malaysia.

47. N. A. C. Sidik and M. Fudhail, “Numerical Simulation of shear driven square cavity using enhanced meshing system", Proceeding, Malaysian Technical Universities Conference on Engineering and Technology, 28-29 June, Melaka, Malaysia.

48. N. A. C. Sidik, M. Fudhail and M. Rody, “Modeling of droplet motion on horizontal plane by using lattice Boltzmann numerical scheme, Proceeding, International Conference on Fundamental and Applied Sciences, 15-16 June 2010, Kuala Lumpur, Malaysia.

49. N. A. C. Sidik and Nik Izual, “LB numerical prediction of natural convection heat transfer in an inclined square enclosure, Proceeding, 19th International Conference on the Discrete Simulation of Fluid Dynamics (DSFD 2010), 5-9 July 2010, Rome, Italy.

50. N. A. C. Sidik and Mohd Rosdzimin, “Mixed convection in a 2-d enclosure with sinusoidal side wall temperature., Proceeding, 19th International Conference on the Discrete Simulation of Fluid Dynamics (DSFD 2010), 5-9 July 2010, Rome, Italy.

51. N. A. C. Sidik and M. Rody, “Modelling of droplet spreading falling by using lattice Boltzmann method, Proceeding, World Engineering Congress, 2-9 August 2010, Kuching, Malaysia.

52. F. A. Munir, N. A. C. Sidik, M. R. M. Zin and M. A. Shaharuzaman, “Numerical Simulation of Flow Behaviours in Driven Cavity at High Reynolds Numbers”, Proceeding, International Conference on Mathematical Applications in Engineering, 3-5 August 2010, Kuala Lumpur, Malaysia.

53. N. A. C. Sidik, M. F. Munir, H. M. Zahir, M. T. Musthafah and M. Rody, “Numerical simulation of shear driven square and triangular cavity by using lattice Boltzmann scheme, Proceeding, World Academy of Science, Engineering and Technology, September 2010, Holland.

54. N. A. C. Sidik and M. F. Munir, “Accurate Numerical Prediction of Incompressible Fluid Flow in Lid Driven Cavities, Proceeding, The 2010 International Conference on Mechanical and Aerospace Engineering, 26-28 Nov, Kuala Lumpur, Malaysia.

55. N. A. C. Sidik, M. A. M. Irwan and M. F. Munir, “Numerical prediction of natural convection heat transfer through porous media by the lattice Boltzmann Method, The 2010 International Conference on Mechanical and Aerospace Engineering, 26-28 Nov, Kuala Lumpur, Malaysia

56. N. A. C. Sidik, S. Jame, A. Maimun and A. Priyanto, “Aerodynamic characteristics of a compound wind during ground effect, Proceeding, the International Conference on marine Technology, 11-12 December, Bangladesh.

57. S. Syahrullail, M. B. Zubil, N. A. C. Azwadi and C. I. Tiong, “The effect of stearic acid as lubricant in cold forward extrusion process”, Proceeding, International Tribology Congress, 5-9 December 2010, Australia

58. S. Syahrullail, N. A. C. Sidik and Y. M. Najib, “The influences of the die half angle of taper die during cold extrusion process”, Proceeding, International conference on advances in Mechanical Engineering, 2-5 December 2010 Kuala Lumpur

59. S. Zuhairi, N.I. N. Izual and N. A. C. Sidik, “Numerical investigation of thermal fluid flow in an inclined square cavity”, proceeding, International congress on fluid dynamics, 16 December 2010, Egypt.

2011 60. N. A. C. Sidik and M. R. Attarzadeh, “Cubic interpolated pseudo particle method to

predict dynamic behaviour of fluid in shear driven cavity”, proceeding, International conference on mechanical, industrial and manufacturing technologies, 26 January 2011, Singapore

61. M. Irwan, Fudhail, Nazri, Nor Azwadi and Suhaimi, “Mesoscale simulation of natural convection in square cavity driven by discrete two source-sink pairs on one sidewall”, proceeding, International Conference on Fluid Dynamics and Thermodynamics Technologies, 1 April 2011, Bali, Indonesia.

62. N. A. C. Sidik and Muhammad Noor Afiq Witri, “Simulation of multicomponent multiphase flow using lattice Boltzmann method” Mechanical Engineering Postgraduate Conference, 21 April 2011, Johor.

63. N. A. C. Sidik, Saeed Jamei, Adi Maimun, Agoes Priyanto and Shuhaimi Mansor, “Aerodynamics characteristics of WIG aircraft”, Mechanical Engineering Postgraduate Conference, 21 April 2011, Johor.

64. N. A. C. Sidik and Mehran Salehi, Blood flow through stenoses, Mechanical Engineering Postgraduate Conference, 21 April 2011, Johor.

65. N. A. C. Sidik and M. Azmi Husin, Thermal fluid flow through porous media, Mechanical Engineering Postgraduate Conference, 21 April 2011, Johor.

66. N. A. C. Sidik, “Writing and publishing in high impact journal”, Mechanical Engineering Postgraduate Conference, 21 April 2011, Johor.

67. M. Irwan, Fudhail Abdul Munir, Daud and Nor Azwadi, Mesoscale simulation of natural convection in square cavity driven by discrete two source-sink pairs on one sidewall, IEEE 3rd International Conference on Communication Software and Networks, 27 May 2011, China.

68. S. Jamei, Adi Mainum, N. A. C. Sidik, A. Priyanto, S. Mansur, Numerical Investigation on performance and environmental impact of a compound wing in ground effect, 2nd International Conference on Fluid Mechanics and Heat Transfer, 14-16 July 2011, Greece.

69. A. A. Hazmil Syahidy and Nor Azwadi, Analysis Of Buoyancy-Aided Convection Heat Transfer From Horizontal Cylinder At Low Reynolds Number , 4th International Meeting on Advances in Thermofluid, 3 October 2011, Melaka

70. N. A. C. Sidik, Goh C.K and Afiq Witri, Computational Analysis Of Heat Flow In Computer Casing, 4th International Meeting on Advances in Thermofluid, 3 October 2011, Melaka.

71. M. S. Idris, N. A. C. Sidik and N. M. Ammar, Cubic Interpolation Profile Navier−Stokes Numerical Scheme For Particle Flow Behaviour In Triangular Lid Driven Cavity, 4th International Meeting on Advances in Thermofluid, 3 October 2011, Melaka.

72. M. A Irwan, N. A. C. Sidik, A. M. Fudhail, M. Suhaimi, N. M. Daud , R. Nadlene and M. S. Idris, Free Convection In Square Cavity Driven By Discrete Three Source–Sink Pairs On One Sidewall, 4th International Meeting on Advances in Thermofluid, 3 October 2011, Melaka.

73. N. A. C. Sidik, S. Mehran, W. Afiq, Computational Simulation Of Flow In Stenotic Artery Using Cubic Interpolation Profile Scheme, 4th International Meeting on Advances in Thermofluid, 3 October 2011, Melaka.

74. N. A. C. Sidik and H. Azmi, Numerical Analysis Of Natural Convection In Porous Media Using Constrained Interpolated Profile Method, 4th International Meeting on Advances in Thermofluid, 3 October 2011, Melaka.

75. N. A. C. Sidik, M. Shukri and W. Afiq, Numerical Investigation Of 2d Lid Driven Cavity Using Smoothed Particle Hydrodynamics (Sph) Method, 4th International Meeting on Advances in Thermofluid, 3 October 2011, Melaka.

76. N. A. C. Sidik, S. Norazizi, Numerical Investigation of Flow Through Porous Media Using Lattice Boltzmann Method, 4th International Meeting on Advances in Thermofluid, 3 October 2011, Melaka.

77. N. A. C. Sidik, S. Arman, Numerical Prediction Of Dynamics Of Solid Particle In Lid-Driven Cavity Flow, 4th International Meeting on Advances in Thermofluid, 3 October 2011, Melaka.

78. N. M. Ammar, N. A. C. Sidik, M. S. Idris, Particle Movement In Shear Cavity Flow For Different Stokes Number Using Lattice Boltzmann Method, 4th International Meeting on Advances in Thermofluid, 3 October 2011, Melaka.

79. W. Afiq, N. A. C. Sidik, Simulation Of Multicomponent Multiphase Flow Using Lattice Boltzmann Method, 4th International Meeting on Advances in Thermofluid, 3 October 2011, Melaka.

80. M. S. Idris, N. A. C. Sidik, N. I. Nik Izual, Vortex Structure In A Two Dimensional Triangular Lid-Driven Cavity, 4th International Meeting on Advances in Thermofluid, 3 October 2011, Melaka.

81. A. A. Azunaidi and N. A. C. Sidik, Numerical Simulation of Liquid Droplet from Porous Solids, Simposium Kebangsaan Sains Matematik (SKSM19), UiTM Pulau Pinang 2011.

2012 82. N. A. C. Sidik, P. Emad, S. Arman, Simulation of mixed convection around a square

using LBM, 2012 International Conference on Mechanical and Electrical Technology, 22-24 July 2012, Kuala Lumpur.

83. S. Jamei, Adi Maimun, N. A. C. Sidik, A. priyanto, S. Mansur, Aerodynamics behavior of a compound wing configuration in ground effect, 6th Asia Pacific Workshop on Marine Hydrodynamics, 3-4 September 2012, Malaysia.

84. S. Jamei, Adi Maimun, N. A. C. Sidik, A. priyanto, S. Mansur, Optimize the configuration of the compound wing in ground effect, International Conference on Marine Technology, 20-22 October 2012, Kuala Terengganu, Malaysia.

85. E. Kianpour, Nor Azwadi, Mohsen Agha, Thermodynamics analysis at the end of combustor simulator, Conference on Recent Advances in Aerospace Technology, 21-22 November 2012, Kuala Lumpur, Malaysia.

86. Nor Azwadi and Arman Safdari, Numerical Investigation of Free Convection of Nanofluid in L-Shaped Enclosure, 3rd International Conference on Mechanical and Manufacturing Engineering, 20-21 November 2012, Johor, Malaysia

87. Nor Azwadi, Afiq Witri, Prediction of the Flow Around a Surface-Mounted Cube using Two-Equation Turbulence Models, 3rd International Conference on Mechanical and Manufacturing Engineering, 20-21 November 2012, Johor, Malaysia

88. Nor Azwadi, Arman Safdari, Ali Akbari, Numerical prediction of heat transfer from localized heating in enclosure using CIP method, 3rd International Conference on Mechanical and Manufacturing Engineering, 20-21 November 2012, Johor, Malaysia

89. Nor Azwadi, Emad Kermani, Arman Safdari, Numerical prediction of heat transfer from heated thin plate in a square cavity by using LBM, 3rd International Conference on Mechanical and Manufacturing Engineering, 20-21 November 2012, Johor, Malaysia

90. Nor Azwadi, Arman Safdari, Modelling of Convective Heat Transfer of Nanofluid in inverse L-Shaped cavity, International Conference on Science, Technology and Social Science, 20-22 November 2012, Pahang Malaysia.

91. Nor Azwadi, Mehaboob Basha, Regularized lattice Boltzmann simulation of laminar natural convection in entrance region of 2D channels. 2012 International Conference on Mechatronics and Computational Mechanics20-21 December 2012, Dubai, UAE

2013 92. Nor Azwadi Che Sidik, Afiq Witri, Salim Mohamed Salim, Prediction of k-e

turbulence models for isothermal flows in idealized street canyon, 15th WSEAS International Conference on Mathematical and Computational Methods in Science and Engineering, 2-4 April 2013, Kuala Lumpur, Malaysia

93. Nor Azwadi Che Sidik, Afiq witri, Fatemeh Behrouzi, Mehdi Nakisa, Numerical prediction of wind flow around the high-rise buildings by two equations turbulence model for urban street canyon, 15th WSEAS International Conference on Mathematical and Computational Methods in Science and Engineering, 2-4 April 2013, Kuala Lumpur, Malaysia

94. Nor Azwadi Che Sidik, Reza Masoomzadeh, Lattice Boltzmann simulation of nanofluid in square cavity,15th WSEAS International Conference on Mathematical and Computational Methods in Science and Engineering, 2-4 April 2013, Kuala Lumpur, Malaysia

95. Nor Azwadi Che Sidik, Ehsan Kianpour, Iman Golshokuh, A survey on the geometry of cylindrical cooling holes,15th WSEAS International Conference on Mathematical and Computational Methods in Science and Engineering, 2-4 April 2013, Kuala Lumpur, Malaysia

96. Nor Azwadi Che Sidik, Emad Kermani, Leila Jahanshaloo, Force Evaluation on Different Shape of Particles using Lattice Boltzmann Curved Boundary Methods,15th WSEAS International Conference on Mathematical and Computational Methods in Science and Engineering, 2-4 April 2013, Kuala Lumpur, Malaysia.

97. M. N. Afiq and C . S. Nor Azwadi, S. M. Salim, Simulation of Airflow and Pollutant Dispersion in Idealized Street Canyon under Isothermal and Thermal Conditions, Postgraduate Conference of Environmental Research, 28-29 June 2013, Kuala Lumpur, Malaysia.

98. Ehsan Kianpour, Iman Golshokuh, C. S. Nor Azwadi, Cylindrical and Row Trenched Cooling Holes with Alignment Angle of 0° at Different Blowing Ratios, International Conference on Mechanical, Automotive and Aerospace Engineering, 1-3 July 2013, Kuala Lumpur, Malaysia

99. Emad Kermani, Leila Jahanshaloo, C. S. Nor Azwadi, LBM Simulation of Fluid-Solid Flow with Complex Boundaries , International Conference on Mechanical, Automotive and Aerospace Engineering, 1-3 July 2013, Kuala Lumpur, Malaysia

100. Emad Kermani, Leila Jahanshaloo, C. S. Nor Azwadi, LBM Simulation of Thermal Fluid-Solid Flow in a Pipe, International Conference on Mechanical, Automotive and Aerospace Engineering, 1-3 July 2013, Kuala Lumpur, Malaysia

101. M. N. Afiq, S. M. Salim, N. Hamizah, C. S. Nor Azwadi, Numerical prediction of air flow within street canyon, International Conference on Mechanical Engineering Research, 2-4 July 2013, Pahang, Malaysia

102. Aman Ali Khan, Akmal Hamizi, Emad Kermani, Leila Jahanshaloo, C. S. Nor Azwadi, The use of MRT lattice Boltzmann method for the prediction of fluid solid flow, International Conference on Mechanical Engineering Research, 2-4 July 2013, Pahang, Malaysia

103. Azlin Ismail, C. S. Nor Azwadi, The use of lattice Boltzmann method for particulate flow analysis, International Conference on Mechanical Engineering Research, 2-4 July 2013, Pahang, Malaysia

104. Ehsan Kianpour, Mazlan Abdul Wahid, Iman Golshokouh, C. S. Nor Azwadi, a comparison of cylindrical and row trenched cooling holes with alignment angle of 0 degree near the combustor endwall, International Conference on Mechanical Engineering Research, 2-4 July 2013, Pahang, Malaysia

105. Ahmat Rajab, Ahmad Sofianuddin, C. S. Nor Azwadi, Four sided lid driven cavity flow using time plitting method of Adam-Bashforth scheme, International Conference on Mechanical Engineering Research, 2-4 July 2013, Pahang, Malaysia

106. Saeed Jamei, Adi Maimun, Mobassher, Shuhaimi Mansour, Agoes Priyanto, C. S. Nor Azwadi, Ground viscous effect on 3D flow structure of a compound wing in ground effect, International Conference on Mechanical Engineering Research, 2-4 July 2013, Pahang, Malaysia

107. Tey Wah Yen, S. C. Nor Azwadi Che Sidik, Hydrodynamical analysis of the effect on fish fins morphology, International Conference on Mechanical Engineering Research, 2-4 July 2013, Pahang, Malaysia

List of Chapters in Book 1. N. A. C. Sidik, A. R. M. Rosdzimin and S. M. Syahar, CIP-LBM Scheme for the

simulation of natural convection in enclosure with localized heating, Chapter One, Advances in Mechanical Engineering, UTM Press.

2. N. A. C. Sidik and M. Z. M. Rody, Study of flow pattern around two cylinders in

tandem arrangement, Chapter Two, Advances in Mechanical Engineering, UTM Press.

3. N. A. C. Sidik, Lattice Boltzmann numerical method for simulation of isothermal and thermal fluid flow problems, Chapter Ten, Advances in Thermo-Fluids, UTM Press.

4. N. A. C. Sidik, Lattice Boltzmann numerical method for the simulation of natural convection heat transfer in enclosure, Chapter One, Advances in Mechanical Engineering, Part One, UTM Press.

5. N. A. C. Sidik, Khalid Saqr and Mazlan Wahid, On the use of Boltzmann equation in the mathematical modelling of gaseous detonations, Chapter Eleven, Advances in Mechanical Engineering, Part One, UTM Press.

6. N. A. C. Sidik, Numerical simulation of multiphase flow problem using lattice Boltzmann scheme, Chapter Six, Advances in Mechanical Engineering, Part Two, UTM Press.

7. N. A. C. Sidik, Theory and application of lattice Boltzmann numerical method on isothermal fluid flow problems, Chapter Two, Advances in Applied Numerical Methods, UTM Press.

8. N. A. C. Sidik, Numerical Simulation of three dimensional natural convection heat transfer, Chapter Six, Advances in Applied Numerical Methods, UTM Press.

9. N. A. C. Sidik, Coupled lattice Boltzmann with conventional numerical methods, Chapter Nine, Advances in Applied Numerical Methods, UTM Press.

10. N. A. C. Sidik, N. I. N. Ibrahim and S. A. Osman, Numerical investigation of thermal and fluid flow in a differentially heated enclosure walls at various inclination angles, Latest trends on Engineering Mechanics, structures, Engineering Geology, WSEAS, 2010.

11. N. A. C. Sidik, S. Samion, Lattice Boltzmann Numerical Approach to Predict Macroscale Thermal Fluid Flow Problem, Heat Transfer - Mathematical Modelling, Numerical Methods and Information Technology, INTECH, 2011. ISBN 978-953-307-550-1.

12. Tiong Chiong Ing, Mohammed Rafiq Abdul Kadir, Nor Azwadi Che Sidik and Syahrullail Samion, Experimental Evaluation on Lubricity of RBD Palm Olein Using Fourball Tribotester, Lubricants and Lubrication, INTECH, 2011. ISBN 978-953-307-371-2.

13. Nor Azwadi Che Sidik, Lattice Boltzmann simulation of natural convection and fluid flow around a heated cylinder in an enclosed square, Chapter Seven, Latest Trend in Mechanical Engineering – Part 1, UTM Press.

14. Nor Azwadi Che Sidik and Mohd Rosdzimin Abdul Rahman, Study of flow pattern and heat transfer mechanism from a heated cylinder inside square enclosure at various Rayleigh numbers, Chapter Eleven, Latest Trend in Mechanical Engineering – Part 1, UTM Press.

15. Nor Azwadi Che Sidik, Finite difference incompressible lattice Boltzmann model for the simulation of 2-D lid driven cavity flow, Chapter Twelve, Latest Trend in Mechanical Engineering – Part 1, UTM Press.

16. Nor Azwadi Che Sidik, Study of the effect of time relaxation BGK lattice Boltzmann collision model on the speed of convergence, Chapter Thirteen, Latest Trend in Mechanical Engineering – Part 1, UTM Press.

17. Nor Azwadi Che Sidik, Incompressible finite difference double-population thermal lattice Boltzmann model, Chapter Two, Latest Trend in Mechanical Engineering – Part 2, UTM Press.

18. Nor Azwadi Che Sidik and Mohamad Zuhairi Sulaiman, Laminar flow through a double elbow geometry with lattice Boltzmann numerical method, Chapter Four, Latest Trend in Mechanical Engineering – Part 2, UTM Press.

19. Nor Azwadi Che Sidik, Munther Mussa and Shahrir Abdullah, Numerical simulation of shallow lid-driven cavity flow using lattice Boltzmann, Chapter Six, Latest Trend in Mechanical Engineering – Part 2, UTM Press.

20. Nor Azwadi Che Sidik and Idris Mat Sahat, Finite different and lattice Boltzmann modeling for simulation of natural convection in a square cavity, Chapter Seven, Latest Trend in Mechanical Engineering – Part 2, UTM Press.

21. Nor Azwadi Che Sidik and Fudhail Abdul Munir, Accurate numerical prediction of incompressible fluid flow in deep lid-driven square cavity, Chapter Thirteen, Latest Trend in Mechanical Engineering – Part 2, UTM Press.

List of Research Monographs Nor Azwadi Che Sidik, CIP-LBM Scheme for the simulation of natural convection heat transfer phenomena. List of Books

1. Nor Azwadi Che Sidik, Ali Akbari Sheldareh, "Prediction of fluid solid flows in lid driven cavity using CIP method", ISBN 9783659268359, LAP Lambert Academic Publishing, 2012.

2. Leila Jahanshaloo, Nor Azwadi Che Sidik, “Simulation of contaminant removal using lattice Boltzmann method”, ISBN 3845432357, LAP Lambert Academic Publishing, 2012.

3. Nor Azwadi Che Sidik, “An introduction to the Computational Fluid Dynamics”, ISBN 978983520884, UTM Press, 2013.

Others Nor Azwadi Che Sidik, Mohd Irwan Mohd Azmi, Fudhail Abdul Munir, Mohd Rody Mohamad Zin, Lattice Boltzmann method for fluid flow problems, Buletin FKM Ogos 2010, Universiti Teknikal Malaysia Melaka.