Embed Size (px)
Citation preview
© 08/2017 MultiDyne Specifications subject to change without notice Made in USA
10 Newton PlaceHauppauge, NY 11788877-685-8439 / [email protected] www.multidyne.com © 2019 MultiDyne Specifications subject to change without notice Made in USA
Field Fiber Units
FEATURES w Fully configurable for a wide
variety of production and signal distribution applications
w Almost any MultiDyne product can be integrated into one of the enclosures.
w Extremely rugged case/enclosure.
w Runs on battery or AC supply.
w Anton Bauer or IDX mounting plate
w Features Single-mode or multi-mode configurations.
w Optical connectors include ST, SC, LC as well as TFOCA, PH, Tyco Expanded Beam, Neutrik and SMPTE.
w Remote bower via hybrid fiber cable
w Each platform can interoperate with any MultiDyne product.
APPLICATIONS w ENG
w Sports
w Military
w Any field application where battery-powered equipment is required.
Customize Your LiGHTBoX, LiGHTCuBE or BullDog With Virtually Any MultiDyne Product For Unlimited Flexibility.
Customize Your Field UnitThe MultiDyne family of Field Fiber units includes the LiGHTBoX, LiGHTCuBE and BullDog™ fiber field systems, which are all highly portable, bringing full camera and signal distribution support to hard-to-reach areas or camera positions located far from the on-site production truck or studio. A rugged enclosure housing vital components ensures reliable operation, even in harsh environment conditions. Typical applications include ENG, sports, military and any field application where battery-powered equipment is required.
All of the MultiDyne Field Fiber units are fully customizable, offering virtually any signal configuration and each LiGHTBox, LiGHTCuBE and BullDog can be linked via tactical fiber cable to any MultiDyne product. Users can order almost any MultiDyne, off-the-shelf, fiber-optic unit and it can be integrated into a LiGHTBoX, LiGHTCuBE and BullDog. Just grab it by the handle and go.
As an example, at the 2014 Master’s Golf tournament (on CBS), a LiGHTBoX was used to set up an interview point at the Executive Course, as there is no infrastructure to access power and other necessary signals. The production company then ran a SMPTE hybrid fiber cable (with power) from the on-site truck to the LightBox and the camera simply hooks up to it.
All The Signals In One Box MultiDyne Field Fiber Units can include up to five 3 Gb/s HD/SDI signal paths from the camera to the Base Station and one return path the other way. Full camera control is also provided by the camera manufacturer’s
control panel via serial or a 10/100/GigE ethernet path. Access to genlock, intercom, tally and audio paths can also be incorporated into a LiGHTBoX/LiGHTCuBE combined enclosure for multi-camera productions.
If you have two cameras and you need a lot of Ethernet connection to support a press pool feed, or you might want to send DVI in the other direction to drive a Large Screen at a sports or concert venue. So, the MultiDyne Fiber Field Units provide the freedom to do more in a compact, weatherproof enclosure.
Customize Your Field Fiber UnitIn general, MultiDyne’s Field Fiber units take the place of an audio snake, an HD/POV fiber-optic video/data transceiver and other signal processing equipment. Rather than offer a fixed set of features and capabilities, however, each MultiDyne Field Fiber Unit can be configured with only the features needed and nothing more. This allows the user to save cost initially and then grow with the field box and add new signal processing boards as required. It also allows them to order a small or medium-sized enclosure (with less features), to fit a specific application.
The BullDog, in particular, is entirely scalable, allowing the user to stack various MultiDyne modules, or “LightBrix,” together for more functionality in the same enclosure.
LiGHTBoX, LiGHTCuBE and BullDogRugged, Portable Fiber Connectivity
© 08/2017 MultiDyne Specifications subject to change without notice Made in USA
10 Newton PlaceHauppauge, NY 11788877-685-8439 / [email protected] www.multidyne.com © 2019 MultiDyne Specifications subject to change without notice Made in USA
POTENTIAL SYSTEM CONFIGURATIONS
Field Fiber UnitsLiGHTBoX, LiGHTCuBE and BullDog
Rugged, Portable Fiber Connectivity
LightCuBERemote Production
VENTALATION
HD/SDIIn 1
HD/SDIIn 2
HD/SDIIn 3
1A 1B
HD/SDIIn 4
HD/SDIIn 5
HD/SDIIn 6 VBS In
HD/SDIOut 1
HD/SDIOut 2
HD/SDIOut 3
1A 1B
HD/SDIOut 4
HD/SDIOut 5
HD/SDIOut 6 VBS Out
Audio 2Out
Audio 3Out
Audio 1Out
Audio 4Out
Audio 5Out
Audio 6Out
Audio 8Out
Audio 9Out
Audio 7Out
Audio 10Out
Audio 11Out
PUSH PUSH PUSH PUSH
Audio 1Mic/Line In
Audio 2Mic/Line In
Audio 3Mic/Line In
Audio 4Mic/Line In
PUSH PUSH PUSH PUSH
Audio 5Mic/Line In
Audio 6Mic/Line In
Audio 7Mic/Line In
Audio 8Mic/Line In
PUSH PUSH PUSH
Audio 9Line In
Audio 10Line In
Audio 11Mic/Line In
Intercom Port 2
Intercom Port 3
Intercom Port 1
AC POWER IN
5E
12VDC OUTOptical I/O
Tally I/OIntercom RTS 2W
PUSH
Intercom Port 4
12VDC IN
PUSH
Matrix Panel #4: audio + data
1.5 to 3Gb/s HD/SDI x6.
Mic/Line Audio x8
2 CHs 4W-to-2W2 Wire 2 Ch 4 Wire, 2 Ch
Field
Tally/GPI x2 Tally/GPI x2
Matrix Panel #1: audio + data
1.5 to 3Gb/s HD/SDI Return x6.
Matrix Panel #2: audio + data Matrix Panel #3: audio + data
2w/4w convert
Base
Line Audio x2
Line Level Audio x10
TAC4 SM fiber cable w/OpticalCON Quad-
1 2
1 2
1 2
1 2
Mic
Line
CLIP
0dB
-24dB
-48dB
+50dB+40dB+30dB+20dB+10dB +3dB+2dB0dB
-1dB-3dB
LEVEL GAIN
12V48V
PH GAIN
ML
Mic
Line
CLIP
0dB
-24dB
-48dB
+50dB+40dB+30dB+20dB+10dB +3dB+2dB0dB
-1dB-3dB
LEVEL GAIN
12V48V
PH GAIN
ML
Mic
Line
CLIP
0dB
-24dB
-48dB
+50dB+40dB+30dB+20dB+10dB +3dB+2dB0dB
-1dB-3dB
LEVEL GAIN
12V48V
PH GAIN
ML
Mic
Line
CLIP
0dB
-24dB
-48dB
+50dB+40dB+30dB+20dB+10dB +3dB+2dB0dB
-1dB-3dB
LEVEL GAIN
12V48V
PH GAIN
ML
Mic
Line
CLIP
0dB
-24dB
-48dB
+50dB+40dB+30dB+20dB+10dB +3dB+2dB0dB
-1dB-3dB
LEVEL GAIN
12V48V
PH GAIN
ML
Mic
Line
CLIP
0dB
-24dB
-48dB
+50dB+40dB+30dB+20dB+10dB +3dB+2dB0dB
-1dB-3dB
LEVEL GAIN
12V48V
PH GAIN
ML
Mic
Line
CLIP
0dB
-24dB
-48dB
+50dB+40dB+30dB+20dB+10dB +3dB+2dB0dB
-1dB-3dB
LEVEL GAIN
12V48V
PH GAIN
ML
Mic
Line
CLIP
0dB
-24dB
-48dB
+50dB+40dB+30dB+20dB+10dB +3dB+2dB0dB
-1dB-3dB
LEVEL GAIN
12V48V
PH GAIN
ML
VENTALATION
HD/SDIIn 1
HD/SDIIn 2
HD/SDIIn 3
1A 1B
HD/SDIIn 4
HD/SDIIn 5
HD/SDIIn 6 VBS In
HD/SDIOut 1
HD/SDIOut 2
HD/SDIOut 3
1A 1B
HD/SDIOut 4
HD/SDIOut 5
HD/SDIOut 6
VBS Out
Audio 2Out
Audio 3Out
Audio 1Out
Audio 4Out
Audio 5Out
Audio 6Out
Audio 8Out
Audio 9Out
Audio 7Out
Audio 10Out
Audio 11Out
PUSH PUSH PUSH PUSH
Audio 1Line In
Audio 2Line In
Audio 3Line In
Audio 4Line In
PUSH PUSH PUSH PUSH
Audio 5Line In
Audio 6Line In
Audio 7Line In
Audio 8Line In
PUSH PUSH PUSH
Audio 9Line In
Audio 10Line In
Audio 11Line In
Intercom Port 2
Intercom Port 3
Intercom Port 1
AC POWER IN
5E
12 VDC OUTOptical I/OTally I/O
Intercom Port 4
12VDC INIntercom Port (4W)
Intercom Port 6 (4W)
PUSH
Matrix four-wire ports
x6
x6
x6
Return HD/SDI Video Source
SMALL
MEDIUM
1 SM fiber strand w/ST connectors-
1.5 to 3Gb/s HD/SDI.
Mic/Line Audio x4
1.5 to 3Gb/s HD/SDI Return x2.
LightBox 1430Booth Kit
Mic
Line
CLIP
0dB
-24dB
-48dB
+50dB+40dB+30dB+20dB+10dB +3dB+2dB0dB
-1dB-3dB
LEVEL GAIN
12V48V
PH GAIN
ML
Mic
Line
CLIP
0dB
-24dB
-48dB
+50dB+40dB+30dB+20dB+10dB +3dB+2dB0dB
-1dB-3dB
LEVEL GAIN
12V48V
PH GAIN
ML
Mic
Line
CLIP
0dB
-24dB
-48dB
+50dB+40dB+30dB+20dB+10dB +3dB+2dB0dB
-1dB-3dB
LEVEL GAIN
12V48V
PH GAIN
ML
Mic
Line
CLIP
0dB
-24dB
-48dB
+50dB+40dB+30dB+20dB+10dB +3dB+2dB0dB
-1dB-3dB
LEVEL GAIN
12V48V
PH GAIN
ML
Return HD/SDI Video Source
Talent 1 4W comms
Talent 2 4W comms
Intercom 12 Wire Ch 1 2 Wire Ch 1
Intercom 22 Wire Ch2 2 Wire Ch 2
Matrix four-wire ports
IFB upLL Mic audio down
IFB upLL Mic audio down
Ann Cons
Tally/GPI x2 Tally/GPI x2 1 2
1 2
1 2
1 2
Intercom CH 1 (TAC)
Intercom CH 2 (TAC)
4B
2B
1B
HD/SDI Out 1
Audio 2In
Announce 2 (4W)
Data 2 & GPI
5C
2c
1C
4A
3A
2A
1A
HD/SDIIn
Audio 1In
Audio 4In
Announce 1(4W)
Data 1
PUSH PUSH PUSH
PUSH
3B
2B
1B
HD/SDI In 1
Audio 2Out
Intercom CH 1 (TAC)
Data 2 & GPI
5C
2c
1C
HD/SDIIn 2
Optical I/O
Audio 3Out
4A
3A
2A
1A
HD/SDIOut
Audio 1Out
Audio 4Out
Announce 1 (4W)
Data 1
PUSH PUSH PUSH
PUSH
4C
AC Power
Intercom CH 2 (TAC)
Announce 2 (4W)
Field Base
© 08/2017 MultiDyne Specifications subject to change without notice Made in USA
10 Newton PlaceHauppauge, NY 11788877-685-8439 / [email protected] www.multidyne.com © 2019 MultiDyne Specifications subject to change without notice Made in USA
COMPATIBLE PRODUCTS & SIGNALS
ORDERING INFORMATION
HD-3000:3.0 Gbps Multirate Serial Digital Video Fiber Optic Transmitter, 5 - 2970 Mb/s, SDI, HD-SDI, 3G HD-SDI, DVB ASI, SMPTE 424M,292M/259M/310M/297-2006.
HD-1500:1.5 Gbps Multirate Serial Digital Video Fiber Optic Transmitter, 5 - 1485 Mb/s, SDI, HD-SDI, DVB ASI, SMPTE 292M/259M/310M.
DVM-2500:DVM-2000: 1 video, 8 audio and 2 data channel with tally, Bi-di, Fiber Optic, Transceiver; exceeds RS-250C Short-haul specs.
DVM-3000:12-bit Video Fiber Optic Transmitter; exceeds RS-250C Short-haul specs, with 8 bi-directional Data Channels, Supports RS-232, RS-422 and RS-485 jumper selectable and 2 Bi-directional Voice Channels.
DVI-6000:DVI Dual Link & RGB-HV, WQXGA, 2560 x 1600, ONE Fiber, Singlemode, Transmitter with Stereo Audio, 1 LC Connectors, up to 4KM distanceRGB-5000:Digital RGB and WUXGA Fiber Optic Transmitter, Singlemode, -10dBm, 1 fiber, loop-through HD15 inputs, 1920 BY 1200, supports all sync formats, RGB HV, RGsB, YsUV, YcCrCb, UXGA, SUXGA and UXGA, Component and Analog HDTV signals.
FS6000 FiberSaver:The compact and portable MultiDyne FS–Series is available in three versions (FS-6000, 12000 & 18000). Includes: Optical Remapper/Multiplexer; Optically MUX any Wavelength; Put 6 optical signals on one single Fiber; MUX 6 HDSDI signals on a single Fiber.
DVM-2700:2 video, 8 audio ch., Fiber Optic Transmitter; exceeds RS-250C Short-haul specs. with 1310nm MM & SM.
SATLink:A range of options to suit a variety of installations is available: L-Band RF 950-2150 MHz to optical fiber signal conversion; Up to 50Km range using DFB optics, Fiber Perot optics optional; 9 dB RF gain from FTX to FRX; 20 dB Noise Figure; LNB power up to 400mA; Long Line Compensation (LCC) feature for LNB power.
HD-3500 Series:Standalone HD/SDI Fiber-Optic Transport Systems. Transport digital signals from 5 Mbps up to 2.97 Gb/s (along with analog audio, AES digital audio, serial data, intercom, tally and GPIO signals. Supports four GPIO bi-directional channels and all popular standards, including SMPTE 259M-C; SMPTE 292M and SMPTE 424. HD-SDI interface also transports DVB/ASI and SMPTE 297M interfaces at the defined rates. Includes digital reclocked DA and Repeater and the ability to transport four analog audio channels.
Customers can order the LiGHTBoX in two sizes (models LB-1440 and LB-1430) as well as the half-sized LiGHTCuBE shell. The BullDog is completely scalable, depending upon features required. These LightBrix can be added as needed, including such MultiDyne products as the HD-6000, FiberSaver, L-Band Link, HD-3500, DVI-6000 and many more.
Field Fiber UnitsLiGHTBoX, LiGHTCuBE and BullDog
Rugged, Portable Fiber Connectivity
1 SM fiber strand w/ST connectors-
LightBox 1440Network News / ENG
Intercom 12 Wire Ch 1 2 Wire Ch 1
Intercom 22 Wire Ch2 2 Wire Ch 2
Tally/GPI x2 Tally/GPI x2 1 2
1 2
1 2
1 2
Field Base
AC POWER IN
5E
Optical I/OData & GPI 2Data & GPI 1
TW Intercom Loop
TW Intercom
5D5F
PUSH
HD/SDIOut 1
1A 1B
HD/SDIOut 2
HD/SDIOut 3
HD/SDIOut 4
HD/SDIOut 5
HD/SDIOut 6
HD/SDIIn 1
1A 1B
HD/SDIIn 2
HD/SDIIn 3
HD/SDIIn 4
HD/SDIIn 5
HD/SDIIn 6
Audio Out 2
Audio Out 3
Audio Out 1
Audio Out 5
Audio Out 6
Audio Out 4
Audio In 2
Audio In 3
Audio In 1
Audio In 5
Audio In 6
Audio In 4
5D5F
PUSH
5D5F
PUSH
5D5F
PUSH
5D5F
PUSH
5D5F
PUSH
5D5F
PUSH
HD/SDIIn 1
1A 1B
HD/SDIIn 2
HD/SDIIn 3
HD/SDIIn 4
HD/SDIIn 5
HD/SDIIn 6
HD/SDIOut 1
1A 1B
HD/SDIOut 2
HD/SDIOut 3
HD/SDIOut 4
HD/SDIOut 5
HD/SDIOut 6
Audio In 2
Audio In 3
Audio In 1
Audio In 5
Audio In 6
Audio In 4
5D5F
PUSH
5D5F
PUSH
5D5F
PUSH
5D5F
PUSH
5D5F
PUSH
5D5F
PUSH
Audio Out 2
Audio Out 3
Audio Out 1
Audio Out 5
Audio Out 6
Audio Out 4
AC POWER IN
5E
Optical I/OData & GPI 2Data & GPI 1
TW Intercom Loop
TW Intercom
5D5F
PUSH
Line Level Audio x6
1.5 to 3Gb/s HD/SDI Return x6.x6 Return HD/SDI Video Source
1.5 to 3Gb/s HD/SDI x6. x6x6
Mic/Line Audio x6
Mic
Line
CLIP
0dB
-24dB
-48dB
+50dB+40dB+30dB+20dB+10dB +3dB+2dB0dB
-1dB-3dB
LEVEL GAIN
12V48V
PH GAIN
ML
Mic
Line
CLIP
0dB
-24dB
-48dB
+50dB+40dB+30dB+20dB+10dB +3dB+2dB0dB
-1dB-3dB
LEVEL GAIN
12V48V
PH GAIN
ML
Mic
Line
CLIP
0dB
-24dB
-48dB
+50dB+40dB+30dB+20dB+10dB +3dB+2dB0dB
-1dB-3dB
LEVEL GAIN
12V48V
PH GAIN
ML
Mic
Line
CLIP
0dB
-24dB
-48dB
+50dB+40dB+30dB+20dB+10dB +3dB+2dB0dB
-1dB-3dB
LEVEL GAIN
12V48V
PH GAIN
ML
Mic
Line
CLIP
0dB
-24dB
-48dB
+50dB+40dB+30dB+20dB+10dB +3dB+2dB0dB
-1dB-3dB
LEVEL GAIN
12V48V
PH GAIN
ML
Mic
Line
CLIP
0dB
-24dB
-48dB
+50dB+40dB+30dB+20dB+10dB +3dB+2dB0dB
-1dB-3dB
LEVEL GAIN
12V48V
PH GAIN
ML
LARGE
© 08/2017 MultiDyne Specifications subject to change without notice Made in USA
10 Newton PlaceHauppauge, NY 11788877-685-8439 / [email protected] www.multidyne.com © 2019 MultiDyne Specifications subject to change without notice Made in USA
