fiberglass-pipes-standards-d_.pdf

Embed Size (px)

DESCRIPTION

Standard use for fiber glass pipes

Citation preview

  • Search Custom Search

    Resources, Tools and Basic Information for Engineering and Design of Technical Applications!

    Recommend 1

    Fiberglass Pipes - common StandardsCommonly used standards for fiberglass pipes and their applications

    Some of the fiberglass related standards from the major standardization organizations:

    ASME Standards

    Fiberglass related standards from ASME - American Society of Mechanical Engineers:

    ASME/ANSI B31.1 - POWER PIPINGASME/ANSI B31.3 - PROCESS PIPINGASME/ANSI B31.9 - BUILDING SERVICES PIPING

    ASTM Standards

    Fiberglass related standards from ASTM International

    ASTM C 581 - STANDARD PRACTICE FOR DETERMINING CHEMICAL RESISTANCE OGLASS-FIBER-REINFORCED STRUCTURES INTENDED FOR LIQUID SERVICE

    ASTM C 582 - STANDARD SPECIFICATION FOR CONTACT-MOLDED REINFORCED THLAMINATES FOR CORROSION RESISTANT EQUIPMENT

    ASTM D 149 - STANDARD TEST METHOD FOR DIELECTRIC BREAKDOWN VOLTAGE ASOLID ELECTRICAL INSULATING MATERIALS AT COMMERCIAL POWER FREQUENCI

    ASTM D 257 - TEST METHODS FOR DC RESISTANCE OR CONDUCTANCE OF INSULAASTM D 638 - STANDARD TEST METHOD FOR TENSILE PROPERTIES OF PLASTICSASTM D 695M - TEST METHOD FOR COMPRESSIVE PROPERTIES OF RIGID PLASTICASTM D 696 - STANDARD TEST METHOD FOR COEFFICIENT OF LINEAR THERMAL E30 DEGREES C AND 30 DEGREES C WITH A VITREOUS SILICA DILATOMETER

    ASTM D 790 - STANDARD TEST METHODS FOR FLEXURAL PROPERTIES OF UNREINPLASTICS AND ELECTRICAL INSULATING MATERIALS

    ASTM D 792 - TEST METHODS FOR DENSITY AND SPECIFIC GRAVITY (RELATIVE DEDISPLACEMENT

    ASTM D 1598 - STANDARD TEST METHOD FOR TIME-TO-FAILURE OF PLASTIC PIPE PRESSURE

    ASTM D 1599 - STANDARD TEST METHOD FOR RESISTANCE TO SHORT-TIME HYDRTUBING, AND FITTINGS

    ASTM D 2105 - STANDARD TEST METHOD FOR LONGITUDINAL TENSILE PROPERTIEREINFORCED THERMOSETTING-RESIN) PIPE AND TUBE

    ASTM D 2143 - STANDARD TEST METHOD FOR CYCLIC PRESSURE STRENGTH OF RPLASTIC PIPE

    ASTM D 2290 - STANDARD TEST METHOD FOR APPARENT HOOP TENSILE STRENGTPLASTIC PIPE BY SPLIT DISK METHOD

    ASTM D 2310 - STANDARD CLASSIFICATION FOR MACHINE-MADE "FIBERGLASS" (GTHERMOSETTING-RESIN) PIPE

    ASTM D 2412 - STANDARD TEST METHOD FOR DETERMINATION OF EXTERNAL LOAPIPE BY PARALLEL-PLATE LOADING

    ASTM D 2444 - TEST METHOD FOR DETERMINATION OF THE IMPACT RESISTANCE OFITTINGS BY MEANS OF A TUP (FALLING WEIGHT)

    Page 1 of 7

    6/16/2013http://www.engineeringtoolbox.com/fiberglass-pipes-standards-d_789.html

  • ASTM D 2583 - STANDARD TEST METHOD FOR INDENTATION HARDNESS OF RIGID IMPRESSOR

    ASTM D 2584 - STANDARD TEST METHOD FOR IGNITION LOSS OF CURED REINFORASTM D 2924 - STANDARD TEST METHOD FOR EXTERNAL PRESSURE RESISTANCEREINFORCED THERMOSETTING-RESIN) PIPE

    ASTM D 2925 - STANDARD TEST METHOD FOR BEAM DEFLECTION OF "FIBERGLASSTHERMOSETTING RESIN) PIPE UNDER FULL BORE FLOW

    ASTM D 2992 - STANDARD PRACTICE FOR OBTAINING HYDROSTATIC OR PRESSUR"FIBERGLASS" (GLASS-FIBER-REINFORCED THERMOSETTING-RESIN) PIPE AND FIT

    ASTM D 2996 - STANDARD SPECIFICATION FOR FILAMENT-WOUND "FIBERGLASS" (THERMOSETTING-RESIN) PIPE

    ASTM D 2997 - STANDARD SPECIFICATION FOR CENTRIFUGALLY CAST "FIBERGLASTHERMOSETTING-RESIN) PIPE

    ASTM D 3262 - STANDARD SPECIFICATION FOR "FIBERGLASS" (GLASS-FIBER-REINFSEWER PIPE

    ASTM D 3517 - STANDARD SPECIFICATION FOR "FIBERGLASS" (GLASS-FIBER-REINFPRESSURE PIPE

    ASTM D 3567 - STANDARD PRACTICE FOR DETERMINING DIMENSIONS "FIBERGLASTHERMOSETTING RESIN) PIPE AND FITTINGS

    ASTM D 3615 - CHEMICAL RESISTANCE OF THERMOSET MOLDING COMPOUNDSASTM D 3681 - STANDARD TEST METHOD FOR CHEMICAL RESISTANCE OF "FIBERGTHERMOSETTING-RESIN) PIPE IN A DEFLECTED CONDITION

    ASTM D 3754 - STANDARD SPECIFICATION FOR "FIBERGLASS" (GLASS-FIBER-REINFSEWER AND INDUSTRIAL PRESSURE PIPE

    ASTM D 3840 - STANDARD SPECIFICATION FOR "FIBERGLASS" (GLASS-FIBER-REINFPIPE FITTINGS FOR NONPRESSURE APPLICATIONS

    ASTM D 4024 - STANDARD SPECIFICATION FOR MACHINE MADE "FIBERGLASS" (GLATHERMOSETTING RESIN) FLANGES

    ASTM D 4161 - STANDARD SPECIFICATION FOR "FIBERGLASS" (GLASS-FIBER-REINFPIPE JOINTS USING FLEXIBLE ELASTOMERIC SEALS

    ASTM D 5365 - STANDARD TEST METHOD FOR LONG-TERM RING-BENDING STRAINREINFORCED THERMOSETTING-RESIN) PIPE

    ASTM D 5421 - STANDARD SPECIFICATION FOR CONTACT MOLDED "FIBERGLASS" (THERMOSETTING RESIN) FLANGES

    ASTM D 5677 - STANDARD SPECIFICATION FOR FIBERGLASS (GLASS-FIBER-REINFOAND PIPE FITTINGS, ADHESIVE BONDED JOINT TYPE, FOR AVIATION JET TURBINE

    ASTM D 5685 - STANDARD SPECIFICATION FOR "FIBERGLASS" (GLASS-FIBER-REINFPRESSURE PIPE FITTINGS

    ASTM D 6041 - STANDARD SPECIFICATION FOR CONTACT-MOLDED "FIBERGLASS" (THERMOSETTING RESIN) CORROSION RESISTANT PIPE AND FITTINGS

    ASTM E 228 - LINEAR THERMAL EXPANSION OF SOLID MATERIALS WITH A VITREOUASTM F 1173 - STANDARD SPECIFICATION FOR THERMOSETTING RESIN FIBERGLAMARINE APPLICATIONS

    AWWA Standards

    Fiberglass related standards from AWWA - American Water Works Association

    AWWA C950-01 - Fiberglass Pressure PipeAWWA D120-84 (R89) - Thermosetting Fiberglass-Reinforced Plastic TanksAWWA F101-02 - Contact-Molded, Fiberglass-Reinforced Plastic Wash Water Troughs andAWWA F102-02 - Matched-Die-Molded, Fiberglass-Reinforced Plastic Weir Plates, Scum B

    BSi Standards

    Fiberglass related standards from BSi - British Standards institute

    BS 5480 - Specification for glass reinforced plastics (GRP) pipes, joints and fittings for use fBS 6464 - Specification for reinforced plastics pipes, fittings and joints for process plantsBS 7159 - Code of practice for design and construction of glass-reinforced plastics (GRP) p

    Page 2 of 7

    6/16/2013http://www.engineeringtoolbox.com/fiberglass-pipes-standards-d_789.html

  • Search

    BS 8010-2.5 - Code of practice for pipelines - Pipelines on land: design, construction and inplastics

    DIN Standards

    Fiberglass related standards from DIN - Deutsches Institut fr Normung

    DIN 53393 - Testing of Textile Glass-reinforced Plastics; Behavior to the Effect of ChemicalsDIN 53758 - Testing of plastics articles; determination of the effect of internal pressure on hoDIN 53768 - Determination by extrapolation of the long-term behavior of glass fiber reinforceDIN 53769-1 - Testing of glass fiber reinforced plastics pipes; determination of the longitudinDIN 53769-2 - Testing of glass fiber reinforced plastics pipes; long-term hydrostatic pressureDIN 53769-3 - Testing of glass fiber reinforced plastics pipes; determination of initial and lonDIN 53769-6 - Testing of glass fiber reinforced plastics pipes; Testing of pipes and fittings uDIN EN 59 - Glass Reinforced Plastics; Measurement of Hardness by Means of a Barcol ImDIN EN 637 - Plastics piping systems - Glass-reinforced plastics components - Determinatiothe gravimetric method

    DIN EN 705 - Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipesanalyses and their use

    DIN EN 761 - Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipesdry conditions

    DIN EN 1393 - Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipetensile properties

    DIN EN 1447 - Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipeto internal pressure

    DIN EN 1448 - Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) comdesign of rigid locked socket- and -spigot joints with elastomeric seals

    DIN EN 1449 - Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) comdesign of a cemented socket- and -spigot joints

    DIN EN 1450 - Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) comdesign of bolted flange joints

    ISO Standards

    Fiberglass related standards from ISO - International Organization for Standardization

    ISO 178 - Plastics - Determination of flexural propertiesISO 527-4 - Plastics - Determination of tensile properties - Part 4: Test conditions for isotropcomposites

    ISO 7370 - Glass fiber reinforced thermosetting plastics (GRP) pipes and fittings; Nominal dstandard lengths

    ISO 7510 - Plastics piping systems - Glass-reinforced plastics (GRP) components - Determusing the gravimetric method

    ISO 7684 - Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes - dry conditions

    ISO 10466 - Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes -initial ring deflection

    ISO 10928 - Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes aanalysis and their use

    ISO/TR 10465-1 - Underground installation of flexible glass-reinforced thermosetting resin (Gprocedures

    ISO/TR 10465-2 - Underground installation of flexible glass-reinforced thermosetting resin (Gcalculation methods

    ISO/TR 10465-3 - Underground installation of flexible glass-reinforced thermosetting resin (Gparameters and application limits

    Search the Engineering ToolBox

    Custom Search

    Page 3 of 7

    6/16/2013http://www.engineeringtoolbox.com/fiberglass-pipes-standards-d_789.html

  • Related Topics

    Codes and Standards - Piping codes and standards - ASME, ANSI, ASTM, AGA, API, AWW

    Related Documents

    ASME B31.9 - Working Pressure and Temperature Limits - The working pressure and tempBuilding Services Piping

    Capacity of Sewer Pipes - Carrying capacity of sewer and wastewater pipes - gpm and liter Fiberglass Pipes - Temperature Limits - Temperature range for fiberglass Epoxy, Furan, PhPlastics Abbreviations - Plastic abbreviations in common use Support Spacing for ABS, PE, PVC, Fiberglass and Steel Pipes - Support span for ABS, PEThermal Expansion of PVC, CPVC, Carbon Steel, Stainless Steel and Fiberglass Pipes - TyCarbon and Stainless Steel and Fiberglass pipes

    Engineering ToolBox - SketchUp Edition - Online 3D modeling!

    Engineering ToolBox - SketchUp Edition - enabled for use with the amazing, fun and free Google Sk

    Translate the ToolBox

    Arabic - Chinese (Simplified) - Chinese (Traditional) - Dutch - French - German - Italian - JapaneseSpanish - - Select Your own language . .

    About the ToolBox

    We appreciate any comments and tips on how to make The Engineering ToolBox a better informatio

    [email protected]

    if You find any faults, inaccuracies, or otherwise unacceptable information.

    The content in The Engineering ToolBox is copyrighted but can be used with NO WARRANTY or LIalways be double checked with alternative sources. All applicable national and local regulations andbe strictly followed and adhered to.

    Advertise in the ToolBox

    If you want to promote your products or services in the Engineering ToolBox - please use Google A

    Home Acoustics Air Psychrometrics Basics Combustion Drawing Tools Dynamics Economics Electrical Environment

    Page 4 of 7

    6/16/2013http://www.engineeringtoolbox.com/fiberglass-pipes-standards-d_789.html

  • Fluid Mechanics Gas and Compressed Air HVAC Systems Hydraulics and Pneumatics Insulation Material Properties Mathematics Mechanics Miscellaneous Physiology Piping Systems Process Control Pumps Standards Organizations Steam and Condensate Thermodynamics Water Systems

    Convert UnitsTemperature

    0 oC oF

    Convert!

    Length1

    m km in ft yards miles nautical miles

    Convert!

    Volume1

    m3 liters in3 ft3 us gal

    Convert!

    Velocity1

    m/s km/h ft/min ft/s mph knots

    Convert!

    Pressure1

    Page 5 of 7

    6/16/2013http://www.engineeringtoolbox.com/fiberglass-pipes-standards-d_789.html

  • Pa (N/m2) bar mm H2O kg/cm2 psi inches H2O

    Convert!

    Flow1

    m3/s m3/h US gpm cfm

    Convert!

    Free Industry

    Magazines

    Official

    Gear Solutions

    Medical Design Briefs

    Engineering Standards

    Page 6 of 7

    6/16/2013http://www.engineeringtoolbox.com/fiberglass-pipes-standards-d_789.html

  • Free Industry

    Magazines

    Official

    Gear Solutions

    Medical Design Briefs

    Engineering Standards

    Page 7 of 7

    6/16/2013http://www.engineeringtoolbox.com/fiberglass-pipes-standards-d_789.html