3
Unaffected by Suspended Solids Operates in Turbulent Fluids  Cable Mounting 100m Depth Capability Submerged type float switch for sewer and industrial waste systems.  This self-weighted cable end float switch is designed for use in turbulent industrial fluids and fluids with suspended agglomerates, such as sewe r water. Version with Polyurethane cabl e is for use in Fuel Oils.  The switch is water resistant up to a depth of 100m, and is insensitive to humidity and condensation, due to the particular design of the switch eleme nt. This makes it suitable for applications whe re there may be wide or rapid fluctuations in ambient or fluid tempera tures. Switching capacity of this new design of self-cleanin g switch element is 10A at 250V ac.  The outer casing is manufactured in blow moulded Polyethylene (PEHD) and the switch element is surrounded by non-hygroscopic closed cell expanded polyurethane, hermetically sealing the unit.  The switch is fitted with an internal weight such that it fixes the centre of gravity , and rotation, close to the cable entry. An external coun terweight is supplied to adjus t the pivot position.  The moulding shape is rounded to preven t the accumulation of solids, that could cause the float to sink. FFSMC  Series  Mod el f or d ies el o il Mod el f or s ewe r wate r MECHANICAL On - Off Differential 115° Off - On 195 78 It is necessary to use an auxiliary relay, when switching pump motors or any loads that are not purely resistive. T echnical Specifications Cynergy3 part FFSMC10C FFSMC10CU Blue Red Contact Form C/O Switching Current Max. Resistive 10 A Switching Current Max. Inductive AC 4A DC 1A Power Rating AC V A 750 Max DC W 180 Switching Voltage AC V 250 Max DC V 110 Cable Material PVC Polyurethane Cable length 5m Body Material High Density Polyethylene  Temperature Range °C 0 / +55 °F + 32 / +131 Max. working pressure bar 10 Cynergy3 Components Ltd 7 Cobham Road Ferndown Industrial Estate Wimborne Dorset BH21 7PE T el : +44 ( 0) 1202 897969 [email protected] www .cynergy3.com ISO 9001CERTIFIED © 2011 Cynergy3 Components, All Rights Reserved. Specifications are subject to change without prior notice. Cynergy3 Components and the Cynergy3 Components logo are trademarks of Cyn ergy3 Components Limited.

FFSMC 2011

Embed Size (px)

Citation preview

8/3/2019 FFSMC 2011

http://slidepdf.com/reader/full/ffsmc-2011 1/2

• Unaffected bySuspended Solids

Operates in TurbulentFluids

 

Cable Mounting

100m DepthCapability

Submerged type float switch for sewer and industrial waste systems.

 This self-weighted cable end float switch is designed for use in turbulent industrial fluids and fluids with suspendedagglomerates, such as sewer water. Version with Polyurethane cable is for use in Fuel Oils.

 The switch is water resistant up to a depth of 100m, and is insensitive to humidity and condensation, due to theparticular design of the switch element. This makes it suitable for applications where there may be wide or rapidfluctuations in ambient or fluid temperatures. Switching capacity of this new design of self-cleaning switch element is10A at 250V ac.

 The outer casing is manufactured in blow moulded Polyethylene (PEHD) and the switch element is surrounded bynon-hygroscopic closed cell expanded polyurethane, hermetically sealing the unit.

 The switch is fitted with an internal weight such that it fixes the centre of gravity, and rotation, close to the cableentry. An external counterweight is supplied to adjust the pivot position.

 The moulding shape is rounded to prevent the accumulation of solids, that could cause the float to sink.

FFSMC Series 

Model for diesel oil Model for sewer water

MECHANICAL

On - Off

Differential

15°

15°

Off - On

195

78

It is necessary to use an auxiliary relay, when switching pump motors or any loads that are not purely resistive.

Technical SpecificationsCynergy3 part FFSMC10C FFSMC10CU

Blue RedContact Form C/OSwitching Current Max. Resistive 10 ASwitching Current Max. Inductive AC 4A

DC 1APower Rating AC VA 750

Max DC W 180Switching Voltage AC V 250

Max DC V 110Cable Material PVC PolyurethaneCable length 5mBody Material High Density Polyethylene  Temperature Range °C 0 / +55

°F + 32 / +131Max. working pressure bar 10

Cynergy3 Components Ltd7 Cobham RoadFerndown Industrial EstateWimborneDorset BH21 7PETel: +44 (0) 1202 897969

[email protected]

www.cynergy3.comISO 9001CERTIFIED

© 2011 Cynergy3 Components, All Rights Reserved. Specifications are subject to change without prior notice. Cynergy3 Components and the Cynergy3 Components logo are trademarks of Cyn ergy3 Components Limited.

8/3/2019 FFSMC 2011

http://slidepdf.com/reader/full/ffsmc-2011 2/2

FFSMC Series 

cable

Part Numbering System

external counterweight

differential

brown

pipe

wiring diagram for emptying pump

cable entrance

wiring diagram for filling pump

black

brown

pump - on

level drop

pump - off 

blackbrown

blue

brown

pump - off 

level drop

pump - on

blue

Series

Max. current

Contact Form A = n/oB = n/cC = c/o

Blank = PVCU = PolyurethaneW = WRC Approved

Cable length in metres:Blank = 5M standard

FFSMC 10 A U 10

Cable covering:

Installation

tie

www.cynergy3.comISO 9001CERTIFIED

© 2011 Cynergy3 Components, All Rights Reserved. Specifications are subject to change without prior notice. Cynergy3 Components and the Cynergy3 Components logo are trademarks of Cynergy3 Components Limited.