Embed Size (px)
Citation preview
Possibilities and challenges new Hanseplant products
Existing and new (pipeline) products August 22, 2018
I-Fertilizers and Biostimulants
*HanseRoutz*HanseSpor+*HanseBioCopp*HanseBioSulfur*HanseFytofer*Nano technology products:
HanseGuardHanseFerroHanseCypri HanseCalcium (Nano)
*HanseAmino*HanseCalcium
II-Microbiological pesticides
*HanseCure*HanseNatam
*HanseGreenpath
III-Associated Products
*HanseSquad*HanseGoKlean
FERTILIZERS AND BIOSTIMULANTS
HanseBioCopp - Micro mineral Fertilizer
Description and composition
100% natural liquid micronutrient based fertilizer
Contains Elementary colloidal copper
(encapsulated in the biopolymer matrix): 500ppm (0,05%)
Target crop
Mainly vine production
Mode of action
Slow release of copper to the plant persistent increase of tolerance
against biotic and abiotic stress
Application method and dosage
Foliar spray using high volume spraying equipment
2 L/ha
HanseBioCopp - effects
Treated crops become more robust and grow better resulting in yield increase
Promotes healthier and more tolerant plants
Reduces plant loss due to increase of crop resilience helping the crop to withstand abiotic stress
Improves hydraulic conductivity in the soils allowing more efficient nutrient movement through the soil
HanseBioSulfur - Hydrophilic Sulfur Fertilizer
Description and composition
100% natural liquid micronized fertilizer
Contains 70% elementary Sulfur obtained via bacterial
biological process
Target crop
Mainly vine production
Mode of action
Increases absorbed sulfur in the plant improved build up of
amino acids, proteins, enzymes and vitamins better biological
activity prevention of sulfur deficiency yield increase
Application method and dosage
Foliar spray using high volume spraying equipment
5 L/ha
HanseBioSulfur - effects
Improves nutrient use efficiency Less dosage in comparison with conventional sulfur
products Increases crop resilience and tolerance Increases sulfur availability to plants which leads to a better
biological activity Suited for Integrated Pest Management programs and
organic farming Doesn’t leave any visible residues on the crop following
application
HanseFytofer PK (Organic mineral fertilizer)
Description and composition
HanseFytofer PK Phosco (30% P2O5+22% K2O+ 2%CaO): Soil application
HanseFytofer PK Zinco (29% P2O5+21% K2O+ 2%CaO): Soil + Foliar
Mode of action
2 synergistic modes of action:
-Copper : Absorbed by the spores penetrates cell wall and
alters the membrane permeability by neutralizing specific proteins
-Phosphite: Stimulates plant defense
Copper is covered by an organic component slow release
avoid phytotoxicity
Phosphite has high content and is stable in the form for
monopotassium phosphaie
Both active ingredients are stable high efficiency
HanseFytofer (Organic mineral fertilizer)
Application and dosage
Application time: 1) Begin flowering before closure of furrow 2)
Begin of pod development 3) Begin of seed development
Applied as stand alone at low disease pressure
Applied in combination with systemic fungicides at high disease
pressure
Offers sustainable and efficient disease control
Reduces chemical input
Increases crop health and yield
Has low environmental impact and no re-entry period
Used in alternation with systemic fungicides within a disease
control system to break the resistance (rotation program using
molecules of different modes of action)
Effects
NANO Production TECHNOLOGIES: what?
Reactive properties coming from the surface of materials, not
from total mass
As an example:
Iron rust on it‘s surface, not from the inside
Nanotechnology uses this chemical law.
The more surface, the more surface activity
Iron cube with 1 cm side-lengthhas a total surface of 6 cm2
6 cm2 = 0,0006 m2
Fe
Fe
If this cube is split in to small cubes with side lenght of 5 nanometer…….
Total surface = 1200 m2
Fe
Fe
Fe
Fe
Fe
Fe Fe
Fe
Fe
Fe
Fe FeFe
1 cm = 0,0006 m2
Fe
Total surface = 1200 m2
Fe
Fe
Fe
Fe
Fe
Fe Fe
Fe
Fe
Fe
Fe FeFe
Nano technologies makes materialsbetter assimilated by plants
Less material needed to achieve
the same effects/ activity
Smaller particles, quicker up take
More surface, more materialavailable
Fe
Fe
Fe
Fe
Fe
Fe Fe
Fe
Fe
Fe
Fe FeFe
Nano technologies
Smaller particles can be taken up easier
More surface more availabillity
Nano technologies makes materials better assimilated by plants
Less resources for same action
New properties such as increase of photosynthesis
Healthier food through reduction of pesticides
Nano technologies and plant growth
Can improves/triggers plant photosynthesis
accelerates the process of plant photosynthesis by triggering the activity and production of the chloroplasts which boosts the plant’s ability ‘to capture’ more light
Nano technologies and plant growth
Can acts as an abiotic elicitor
stimulates the production of phyto-alexines increasing plant tolerance level and immune system
Hanseplant and nano technologies : HanseGuard
Description and composition
Liquid EC Fertilizer
Contains small amount of NK (9-0-6), minerals and elementary
colloidal silver
Target crops
All crops applications: protected and open
field crops such as cereals, vegetables, fruits,
berries, spices, seedlings and flowers
Hanseplant and nano technologies : HanseGuard
Application method
Foliar spray
Drench irrigation
Endotherapy
Dosage
Foliar spray: 1-2L/ha depending on spray water volume
Irrigation: 1L/ha regardless of irrigation water volume
Mode of action
Accelerates plant photosynthesis process by optimizing the absorption of light by the leaves bigger and healthier plants/ fruits
Acts as an abiotic elicitor via the production of phytoalexines more plant tolerance to biotic and abiotic stress
HanseGuard - Effect
Boosts the overall plant growth
Results in more flowering, better fruit set and more yield
Shortens the crop cycle resulting in earlier harvest
Stimulates root development development of healthier and more robust plants
Reduces plant loss by decreasing disease incidence
Leaves no residues (MRL)
Reduces the use of pesticides and fertilizers
Resilience against plant diseases
Ag
HansePlant and nano technologies: HanseFerro
Effects
Prevents iron deficiency that causes leaf chlorosis and stunted
necrotic plants with insufficient developed fruits
Highly stable making it suitable for use in any soil pH
Reduces iron release into the environment unlike many
common iron chelate based products which often require high
rates of use
Reduces crop costs in comparison with premium iron products
Non-hazardous and does not cause any phytotoxicity effect
HansePlant and nano technologies: pipe line products –HanseCypri
Description and composition
Target crops
Mode of action
Liquid EC Fertilizer
Contains 3% elemental pico copper
All crops applications: protected and open field crops and lawn
Essential in several plant enzymatic systems
Increases photosynthesis process
Application method
Foliar spray (recommended to use a wetting agent)
Drench irrigation
HansePlant and nano technologies: pipe line products – HanseCypri
Cu
Dosage
30ml/ha regardless of water volume
Effects
Prevents copper deficiency that causes poor growth, delayed flowering
and plant sterility
Applied with a low rate of use unlike most common copper fertilizers
such as copper sulfate and copper oxide which prevent plant
phytotoxicity
Strenghtens the plant and ensures a better tolerance resulting in
healthier and more robust plants
Serves to intensify both flavor and color in vegetables and color in
flowers
HanseAmino
Description and composition
Organic liquid fertilizer
Contains high amounts of free L-amino-acids obtained by enzymatic hydrolysis
Target crop
Applicable in many vegetable, fruit and ornamental crops
Mode of action
Important role in the plant metabolic system.
Free L-amino acids are easily absorbed via roots and leaves due to their small molecule size and specific configuration.
Plant uses them instead of self-synthesizing them
Substantial amount of energy is saved
This extra energy is used to increase: Production + Growth + Resistance to bioticand abiotic stress.
Application method and dosage
Foliar spray: 2-3 L/ ha diluted in up to 1000L of spray volume
Drip/Drench: 4-5 L/ha regardless of applied water volume
HanseCalcium
Description and composition
Filtered water extract of calcium carbonate containing 12 -14% soluble calcium oxide (CaO).
Target crop
Applicable in many vegetable, fruit and ornamental crops
Mode of action
The positively charged calcium ion is bound to a small negatively charged counter ion (smaller than the normal counter ions used in other calcium fertilizers).
This increases the absorption of the calcium, even through the leaf.
Application method and dosage
Foliar Spray: 0.3 - 0.5% solution based on a spray volume of 500 – 1500 L water/ha.
Drench/Drip: 3-5 L/ha applied through the irrigation directly to the root zone. Avoid co-application with fertilizers.
HanseCalcium - Effects
Calcium is easily absorbed
Localized calcium deficiencies are quickly corrected.
Cell walls are stronger and thicker following application
Plant is less penetrable to pathogens
Crop is more resistant to abiotic stress decrease of
tip burn and blossom-end rot
Highly stable formulation
MICRO-BIOLOGICAL PESTICIDES
HanseCure, a Milk derived (pipeline) product
a fermentation derived product
a strong candidate for Asian Soybean Rust (ASR)
EXAMPLE of powdery mildew with HanseCure
The first natural fungicide
based on enzymes
The lactoperoxidase enzyme
is present in
humans and animals
Active in milk, saliva, etc.
Developed by HansePlant
and DMV/Campina
Safe for people and
environment
No resistance
HanseCure If it’s green, it should stay green
HanseCure is natural and safe!
HanseCure’s constituents include thenatural enzyme lactoperoxidase, potassium iodide and potassiumthiocyanate as the active ingredients, plus a number of additives
Comprehensive solution. HanseCure offers the solution forproblems caused by powdery mildew.
HanseCure eliminates fungaldisease in strawberries, aubergines, cucumbers, sweet peppersand tomatoes.
No resistance! Mildew is totally unable to develop any resistanceto HanseCure, so it always offers a reliable solution for everyoutbreak of mildew.
No MRL. For the active substances in HanseCure no maximum residuelevels (MRLs) are required.
Proven effect.HanseCure works on a curative basis on crops showinginitial signs of powdery mildew problems. Used according to labeldirections, HanseCure has proven to be extremely effectiveon numerous crops.
HanseNatam,a fermentation derived product
HanseGreenpath - Botanical extract
Description and composition
Biological agent based on botanical extract of seed kernels of karanj tree
(Pongamia glabra)
ME (Micro Encapsulated)
Efficacy is enhanced when applied in combination with a spray adjuvant
Target pests
Red spider mites
Thrips
Jassids (sucking pests)
Tea mosquito bug
Target crops
Tea, flower crops, vegetable crops, grapes, fruits, orchards, ornamentals,
cereals, fiber crops, sugar crops, cotton, forage crops
HanseGreenpath- Botanical extract
Mode of action
Insect Growth Regulator (IGR).
The hormone ecdysone which causes insect molting is inhibited results
in anti-feedant activity death of the insect.
It also has ovicidal action on mites and thrips
Application method
Foliar high volume spray on crop canopy
Dosage
0.15-0.2% (1.5-2ml/ L water) – Tea: 2-3 ml/L
HanseGreenpath - Effects
Safe to natural parasites, pollinators and predators. Used in IPM programs No residue problems Leads to pest reduction which improves plant health
and thereby increases crop productivity Doesn’t impart taint on edible plants such as tea,
fruits and leafy vegetables Doesn’t induce pest resistance
ASSOCIATED PRODUCTS
HanseSquad - Adjuvant
Description and composition
Objective
Target crops
All type of agricultural, arboriculture and horticulture crops
100 % green chemistry adjuvant blend containing vegetable oil +
coformulants
Composition: 790 g/l ethoxylated triglyceride 100E from vegetal
origin
Emulsifiable concentrate
Used in combination with all types of pesticides (biological
herbicides, fungicides, insecticides, PGR, leaf fertilizers,
biostimulants)
HanseSquad - Adjuvant
Dosage
Mode of action
Recommended rates of use depend on water volume applied
Water volume <100-180 L/ha Dosage: 0,15 L/ha
Water volume 180-300 L/ha Dosage: 0,225 L/ha
Water volume 300-500 L/ha Dosage: 0,4 L/ha
Water volume 500-1000 L/ha Dosage: 0,5 L/ha
Water volume >1000 L/ha Dosage: 0,7 L/ha
Improves spreading properties
Improves the spraying quality by reducing the drift
Provides excellent emulsification without any foam
Increases the average droplet size by 10%
Enhances penetration and translocation of the systemic and
translaminar active ingredient
Reduces losses caused by leaching
HanseSquad - effects
Multi-tasking adjuvant (for all types of pesticides) allowed in organic agriculture
Safe for the environment: Fully biodegradable Improves contact and systemic (biological) pesticides, leaf fertilizers and biostimulants BETTER RESULTSImproves efficacy in limited weather conditions (low RH) Has no influence on pHImproves emulsification and compatibility under limiting factors such as:
Low water volumes (80 - 100 l/ha)Cold situations (4°C)
HanseGoKlean
Description and composition
Universal disinfectant against all types of pathogenic microorganisms such as fungi,
bacteria and virus in soils and on plants.
Contains 100ppm colloidal silver + 100ppm colloidal copper from natural origin, made by
nano technology process and encapsulated by a bio polymer and suspended in water
Objective
Pre-sowing soil disinfection + plant protection during the growing cycle
Mode of action
Colloidal particles present in the product deactivate the microbes’ metabolic system and inhibit their reproduction structure “Resetting properties” (should be followed by recolonization of the rhizosphere with soil probiotics using Vici Routz SP)
Application method and dosage
Foliar spray: Dilution rate: 1-2ml/1L water - 0,5-1L final solution/ha
Drip/Drench: Dilution rate: 2-3ml/1L water
Soil disinfection: 2-3L final solution/1m2 bedding area
Against wilt and soil diseases: Trees: 25-30L final solution/tree
Vegetables: 60-75ml final solution/plant
HanseGoKlean - Effects
Multifunctional and cost-effective
Efficiency is not impaired by any climatic parameter such as hardness, salinity,
temperature or pH
Does not damage plant tissues or affect the chemistry and quality of the
treated product
Non-toxic and environmentally safe
Highly stable and prevents recontamination and bacterial resistance
Non hazardous and leaves no residues
Non irritant, non mutagenic and non carcinogenic
Does not create any odour and does not form chemical compounds with
other chemicals
