Embed Size (px)
Citation preview
Product Information Document
10" Band Pass Subwoofer for Installation Applications
Install Speakers
ATHENSTCS110B
The TURBOSOUND ATHENS TCS110B is a compact 1,200 Watt bandbass subwoofer designed to be used in a variety of installed sound system applications ranging from clubs and wine bars to theatres, themed environments and places of worship. It consists of a high excursion 10" low frequency driver with a specialised voice coil wound on both the inside and the outside of the coil former for higher magnetic density, which results in better cooling, higher power handling, and improved effi ciency.
The 15 mm (5⁄8") birch plywood enclosure consists of two dissimilar compartments, optimally ported to produce substantial sub-bass energy from a cabinet of extremely modest dimensions, and is fi nished in hard wearing semi matt black or optional white paint. The TCS110B has been designed to fi t into small spaces or architectural features where a conventional bass unit would be impractical, and can therefore be installed discreetly under bars or stages, or even underneath seating, without aff ecting sonic performance. Integral M10 rigging points are also provided for easy suspension in fi xed installs. Neutrik speakON* NL4 and barrier strip connectors are provided for input and link through connections.
Band pass subwoofer for installation applications
300 Watts continuous, 1,200 Watts peak power
HIgh excursion 10" low frequency driver with inside/outside wound coil
Low distortion dual port design for maximum sound pressure level
15 mm (5⁄8") birch plywood enclosure with hard wearing semi matt black paint fi nish
Integral M10 rigging points for ease of installation
Neutrik speakON* NL4 and barrier strip connectors
3-Year Warranty Program*
Designed and engineered in England
*All third-party trademarks are the property of their respective owners. Their use neither constitutes a claim of the trademark nor affi liation of the trademark owners with MUSIC Group. Product names are mentioned solely as a reference for compatibility, eff ects and/or components. Warranty details can be found at music-group.com.
2 of 82 of 8
20 100 1k 10k 20k
62
68
74
80
86
92
98
104
110
Frequency (Hz)
Soun
d Pr
essu
re L
evel
(dB)
200Hz Low Pass
Frequency Response Sensitivity 1 W / 1 m
20 100 1k 10k 20k1
10
100
300
Frequency (Hz)
Mag
netu
de (O
hms)
Impedance
Product Information Document
10" Band Pass Subwoofer for Installation Applications
Install Speakers
ATHENSTCS110B
3 of 83 of 8
Dimensions
FRONT
TOP
REARSIDE
BOTTOM
585.0 [23.0315]
330.
0 [1
3.00
00]
80.0 [3.1500 ]425.0 [16.7375 ]
50.0
[1.9
750
]23
0.0
[9.0
500
]
330.0[13.0000]
230.
0 [9
.050
0]50
.0 [1
.975
0]
425.0 [16.7375 ] 80.0 [3.1500]
292.5[11.5125]
30.8
[1.2
125
]
Product Information Document
10" Band Pass Subwoofer for Installation Applications
Install Speakers
ATHENSTCS110B
4 of 84 of 8
Product Information Document
10" Band Pass Subwoofer for Installation Applications
Install Speakers
ATHENSTCS110B
Technical Specifi cations
System
Frequency Response 50 Hz - 150 Hz ±3 dB
40 Hz - 200 Hz -10 dB
Nominal Dispersion Half spacee
Power Handling (IEC) 300 W continuous, 1200 W peak
Sensitivity 94 dB (1 W @ 1 m)
Maximum SPL 119 dB continuous, 125 dB peak
Impedance 8 Ω
Components 1 x 10" (262 mm) LF driver
Enclosure
Connectors 1 x Neutrik speakON* NL4,
1 x barrier strip terminals
WiringParallel / No switch Pins 1+ / 1- input, pins 2+ / 2- link
Discrete –
Dimensions HWD 330 x 585 x330 mm (13.0 x 23.0 x 13.0")
Net Weight 15.8 kg (34.8 lbs)
Construction 15 mm (5⁄8") birch plywood
Finish Semi matt black paint
Grille Powder-coated perforated steel
Flying Hardware M10 x 8
5 of 85 of 8
Product Information Document
10" Band Pass Subwoofer for Installation Applications
Install Speakers
ATHENSTCS110B
Architecture & Engineering Specifi cations
The speaker shall be of the passive subwoofer type consisting of one 10" (262 mm) LF driver. Performance specifi cations of a typical production unit shall meet or exceed the following: frequency response, measured with swept sine wave input, shall be fl at within ±3 dB from 50 Hz to 150 Hz and within -10 dB from 40 Hz to 200 Hz. Nominal dispersion shall be “half space.” Nominal impedance shall be 8 Ohms. Power handling shall be 300 Watts continuous, 1,200 Watts peak. Sensitivity, measured on axis, mean averaged over stated bandwidth, shall be 94 dB, 1 Watt @ 1 metre. Maximum SPL (peak), measured at 1 metre with music program at stated amplifi er input, shall be 125 dB. Dimensions: 330 mm high x 585 mm wide x 330 mm deep (13.0" x 23.0" x 13.0"). Net weight: 15.8 kg (34.8 lbs). The loudspeaker system shall be the TURBOSOUND TCS110B . No other loudspeaker shall be acceptable unless submitted data from an independent test laboratory verifi es that the above combined performance / size specifi cations are equaled or exceeded.
You Are CoveredWe always strive to provide the best possible Customer Experience. Our products are made in our own MUSIC Group factory using state-of-the-art automation, enhanced production workfl ows and quality assurance labs with the most sophisticated test equipment available in the world. As a result, we have one of the lowest product failure rates in the industry, and we confi dently back it up with a generous 3-Year Warranty program.
6 of 86 of 8
Product Information Document
10" Band Pass Subwoofer for Installation Applications
Install Speakers
ATHENSTCS110B
7 of 87 of 8
Product Information Document
10" Band Pass Subwoofer for Installation Applications
Install Speakers
ATHENSTCS110B
For service, support or more information contact the TURBOSOUND location nearest you:
Europe MUSIC Group Services UKTel: +44 156 273 2290Email: [email protected]
USA/Canada MUSIC Group Services NV Inc.Tel: +1 702 800 8290Email: [email protected]
Japan MUSIC Group Services JP K.K.Tel: +81 3 6231 0454Email: [email protected]
MUSIC Group accepts no liability for any loss which may be suff ered by any person who relies either wholly or in part upon any description, photograph, or statement contained herein. Technical specifi cations, appearances and other information are subject to change without notice. All trademarks are the property of their respective owners. MIDAS, KLARK TEKNIK, LAB GRUPPEN, LAKE, TANNOY, TURBOSOUND, TC ELECTRONIC, TC HELICON, BEHRINGER, BUGERA and DDA are trademarks or registered trademarks of MUSIC Group IP Ltd. © MUSIC Group IP Ltd. 2016 All rights reserved.
Product Information Document
10" Band Pass Subwoofer for Installation Applications
Install Speakers
ATHENSTCS110B
