Upload
others
View
2
Download
0
Embed Size (px)
Citation preview
ORDERING EXAMPLE: 2AR - L15/835 - OPTIONS - DIM - UNV - OW - OF - CS - TRIM OPTIONS - N - F1 HOUSING TRIM MOUNT.
HOUSING SERIES LUMENS [ 1 ] CRI CCT OPTIONS CONTROL[ 2 ] VOLTAGE2AR L5 500lm
L7 700lmL9 900lmL12 1,200lmL15 1,500lm
8 809 90 [ 3 ]
27 2700K30 3000K35 3500K40 4000K50 5000K
EM/5W 5-watt emergency battery [4 ]
EM/7W 7-watt emergency battery [ 5 ]
EM/10W 10-watt emergency battery [6 ]
EM/10W/RTS 10-watt emergency battery with regressed test switch [ 7 ]
ATH Airtight construction [ 8 ]
F FuseCP Chicago plenum (CCEA) [ 9 ]
SDT Stepdown transformer [ 1 0 ]
DIM Dimming driver, 0-10V
DIM1 1% Dimming driver, 0-10V [ 1 1 ]
UNV 120-277V347 347V [ 1 2 ]
TRIM [ 1 3 ]
TRIM TYPE DISTRIBUTION [ 1 4 ] FLANGE TYPE REFLECTOR FINISH TRIM OPTIONSO Open reflectorL Flush lensR Regressed lensA Angled lens
W 35° WideM 20° MediumN 15° Narrow
OF 1/2″ standard flange
ZF Zero-flange mud-in [ 1 5 ]
CS Clear semi-specular anodizeWH White texture powder coat BL Black texture powder coat
MWT Textured white trim flange [ 1 6 ]
AD Diffuse acrylic lens [ 1 7 ]
PD Diffuse 1/8″ polycarbonate lens [ 1 8 ]
WET/CC Wet location, covered ceiling listed [ 1 9 ]
AM Anti-microbial [ 2 0]
MOUNTINGMOUNTING TYPE [ 2 1 ] MOUNTING HARDWARE [ 2 2 ] N Open pan for new construction [ 2 3 ]
I IC-rated enclosure for new construction [ 2 4 ]
R Remodel kit [ 2 5 ]
F1 Integral 2-position fixed pan bracket, universal bar hanger included [ 2 6 ]
BA1 Adjustable butterfly pan bracket, bar hanger not included [ 2 7 ]
CA1 Adjustable caterpillar pan bracket, universal bar hanger included [ 2 8 ]
FEATURES ■ 2″ aperture is unobtrusive in small scale
spaces ■ Adjustable aim with 0° - 45° tilt and 360°
rotation ■ Zero-flange trim options for modern ceiling ■ Die cast trim choices include flush,
regressed or angled lens
SPECIFICATIONS ■ HOUSING – Die-cast aluminum spun and
stamped articulating mechanism with forged aluminum heat sink. Galvanized steel splice compartment with driver mounting plate/enclosure. Mounting clips allow for ceiling thickness from 1/2″ – 13/16″.
■ OPEN REFLECTOR – Low-iridescent anodized aluminum. Clear semi-specular finish standard.
■ LENSED TRIM – Die-cast aluminum frame with micro-prismatic, tempered glass lens. Diffuse acrylic lens standard with A Trim Type.
■ ELECTRICAL – High-performance Class 2 C.O.B. LED array. Modular quick-connect plug for easy field-connection of LED light assembly to driver. Reported L70>55,000 hours. Reported L90>55,000 hours. Estimated L70 = 200,000 hours.
■ MOUNTING – Recessed. 20 ga. galvanized steel mounting pan for new construction or IC-rated enclosure. N and R mounting types for use in non-fire rated installations only. Minimum 13-1/4″ O.C. marked spacing required for L12 and L15 lumen packages when specified with R Mounting Type.
■ LISTINGS – ■ cCSAus conforms to UL STD 1598; Certified
to CAN/CSA STD C22.2 No. 250.0 for damp locations. LED light assembly conforms to UL 2108 for remote installation.
■ Suitable for wet location under covered ceiling when specified with WET/CC option.
■ IC-rated for direct contact with insulation when specified with I Mounting Type.
■ City of Chicago Environmental Air approved when specified with CP option.
■ Complies with ASTM-E283 when specified with ATH option.
■ RoHS compliant. ■ WARRANTY – 5-year limited warranty, see
hew.com/warranty.
NOTES1 Lumen output based on O trim type, W
distribution and CS finish, 3500K/80CRI. Actual lumens may vary +/-5%, see page 2 for FIXTURE PERFORMANCE DATA
2 See page 3 for ADDITIONAL CONTROL OPTIONS.
3 Not available with 5000K CCT. Extended lead times may apply. Consult factory for availability.
4 N and R Mounting Types only.5 N and R Mounting Types only.6 Not available with L5 lumen package. N
and R Mounting Types only.7 Not available with L5 lumen package,
WET/CC or ATH options. N Mounting Types only. Top access required. See page 5 for EM BATTERY DETAILS.
8 I Mounting Type required.9 I Mounting Type required.1 0 May be required for 347V, see product
builder at hew.com/product-builder1 1 L9 minimum lumen package required
1 2 Not available with EM batteries or DMX controls.
1 3 Trim ships separately.1 4 Beam angle based on O Trim Type and
CS Reflector Finish. Trim Type affects beam angle. See page 2 for FIXTURE PERFORMANCE DATA.
1 5 For use with mud-in plaster construction only, supplied with mud flange installation kit. See page 4 for TRIM TYPE DETAILS. Not available with O Trim Type, or ATH or WET/CC options.
1 6 Not available with ZF Flange Type or WH Reflector Finish.
1 7 W distribution only. Not available with O Trim Type.
1 8 W distribution only. Not available with O Trim Type.
1 9 Not available with O Trim Type or ZF Flange Type.
2 0 WH and BL Reflector Finishes only.
2 1 Mounting hardware required (N and I only), ordered separately, see MOUNTING HARDWARE ordering info. See page 4 for MOUNTING TYPE DETAILS.
2 2 Additional mounting hardware options available. See page 5 for MOUNTING HARDWARE DETAILS.
2 3 Top access required for driver maintenance.
2 4 L9 lumen package max. Top access required for driver maintenance.
2 5 Also used in new construction sheetrock ceilings.Additional plenum space required for R mounting when specified with EM battery. See page 5 for EM BATTERY DETAILS.
2 6 N and I Mounting Types only. I Mounting requires external brackets.
2 7 N Mounting Type only2 8 N Mounting Type only
NEW CONSTRUCTION AND REMODEL
CATALOG #: ������������������������������������������������
TYPE: ������������������������������������������������������
PROJECT: ���������������������������������������������������1/2″ min13/16″ max
ø2-11/16″
5-13/16″
13-1/8″
H.E. Williams, Inc. Carthage, Missouri www.hew.com 417-358-4065 Designed and Manufactured in the USAInformation contained herein is subject to change without notice.
Downlights Page 1 of 5REV.08/06/20JL
2AR LED 2″ Adjustable Downlight – Round
FIXTURE PERFORMANCE DATA
OPEN REFLECTOR TRIM TYPE FLUSH LENS TRIM TYPE REGRESSED LENS TRIM TYPE ANGLED LENS TRIM TYPE
DISTRIBUTION WATTAGE DELIVERED LUMENS
EFFICACY (lm/W)
DELIVERED LUMENS
EFFICACY (lm/W)
DELIVERED LUMENS
EFFICACY (lm/W)
DELIVERED LUMENS
EFFICACY (lm/W)
L5
W 8.2 543 66 454 55 441 54 360 44M 8.2 391 48 303 37 292 36 195 24N 8.2 466 57 407 50 400 49 298 36
L7
W 11.5 770 67 643 56 626 54 511 44M 11.5 554 48 430 37 415 36 276 24N 11.5 661 57 578 50 567 49 423 37
L9
W 14.5 955 66 798 55 776 54 634 44M 14.5 687 47 533 37 514 35 342 24N 14.5 820 57 716 49 703 49 525 36
L12
W 20.9 1272 61 1063 51 1034 49 844 40M 21.0 915 44 710 34 685 33 456 22N 20.9 1092 52 954 46 937 45 699 33
L15
W 27.9 1436 51 1200 43 1167 42 953 34M 27.9 1033 37 802 29 773 28 515 18N 27.9 1233 44 1077 39 1058 38 789 28
MULTIPLIER TABLESCOLOR TEMPERATURE
CCT CONVERSION FACTOR
80 CR
I
2700K 0.923000K 0.983500K 1.004000K 1.015000K 1.02
90 CR
I 2700K 0.763000K 0.793500K 0.824000K 0.84
REFLECTOR FINISHCATALOG NUMBER
CONVERSION FACTOR
CS 1.00WH 0.89BL 0.47
TRIM OPTIONSCATALOG NUMBER
CONVERSION FACTOR
AD 0.85PD 0.85
BEAM ANGLETRIM TYPE
OPEN FLUSH REGRESSED ANGLEDW 35° 35° 35° 30°M 20° 20° 20° 20°N 15° 15° 15° 20°
■ Photometrics tested in accordance with IESNA LM-79. Results shown are based on 25ºC ambient temperature.
■ Wattage shown is based on 120V input. ■ Results based on 3500K, 80 CRI, actual lumens may
vary +/-5% ■ Beam angle based on O Trim Type and CS Reflector
Finish. ■ Use multiplier tables to calculate additional options.
PHOTOMETRY2AR-L12/835-DIM-UNV-OW-OF-CS (0° tilt) Report #: 13257190; 03/16/20 | Total Luminaire Output: 1272 lumens; 20.9 Watts | Efficacy: 60.8 lm/W | 80 CRI; 3500K CCT
90°
0° 20°
40°
80°
0° 90°
60°
-90°
20°
-40°
-80°
-60°
CAND
LEPO
WER D
ISTRI
BUTIO
N
VERTICAL ANGLE
HORIZONTAL ANGLE ZONAL LUMENS0º 45º 90º 135º 180º
0 4289 4289 4289 4289 42895 3774 3951 4315 4457 4336 10115 2373 2461 2698 2969 3068 38225 65 79 145 260 278 13335 7 9 12 13 14 545 2 3 5 5 5 255 1 2 2 2 2 165 1 1 1 1 0 075 0 0 0 0 0 085 0 0 0 0 0 090 0 0 0 0 0
LUME
N SU
MMAR
Y
ZONE LUMENS % FIXTURE
0 - 40 1266 1000 - 60 1271 1000 - 90 1272 1000 - 180 1272 100
H.E. Williams, Inc. Carthage, Missouri www.hew.com 417-358-4065 Designed and Manufactured in the USAInformation contained herein is subject to change without notice.
Downlights Page 2 of 5REV.08/06/20JL
2AR LED 2″ Adjustable Downlight – Round
WIDE0° TILT 45° TILT
MEDIUM0° TILT 45° TILT
NARROW0° TILT 45° TILT
OPEN
35° 20° 15°
FLUS
H
35° 20° 15°
REGR
ESSE
D
35° 20° 15°
ANGL
ED
30° 20° 20°
ADDITIONAL CONTROL OPTIONS347V may require stepdown transformer, see product builder at hew.com/product-builder. R Mounting Type only available with DIM, DIM1, and DIM LINE controls.
CATALOG NUMBER DESCRIPTIONDIM Dimming driver prewired for 0-10V low voltage applicationsDIM1 1% dimming driver prewired for 0-10V low voltage applicationsDIM LINE Line voltage dimming driver (TRIAC and ELV compatible at 120V only)DMX 0.1% dimming driver for DMX controlsLTE LINE Lutron Hi-lume 1% 2-wire dimming driver forward phase line voltage controls (120V only)LDE1 Lutron Hi-lume 1% EcoSystem dimming LED driverLDE5 Lutron 5-Series 5% EcoSystem dimming LED driverVRF/DSR Lutron Vive integral fi xture control, RF only (DFCSJ-OEM-RF) and sensor-ready driverVRF/DBI/LDE1 Lutron Vive integral fi xture control, RF only (DFCSJ-OEM-RF), Lutron Hi-lume 1% EcoSystem dimming LED driver, and digital link interfaceVRF/DBI/LDE5 Lutron Vive integral fi xture control, RF only (DFCSJ-OEM-RF), Lutron 5-Series 5% EcoSystem dimming LED driver, and digital link interfaceFCJS/DIM Lutron Vive PowPak wireless fi xture control with dimming driverFCJS/DIM1 Lutron Vive PowPak wireless fi xture control with 1% dimming driverELDO SOLOB EldoLED Solodrive, 0.1% dimming driver for 0-10V controlsELDO SOLOB DALI EldoLED Solodrive, 0.1% dimming driver for DALI controlsELDO ECO1 EldoLED Ecodrive, 1% dimming driver for 0-10V controlsELDO ECO1 DALI EldoLED Ecodrive, 1% dimming driver for DALI controls
H.E. Williams, Inc. Carthage, Missouri www.hew.com 417-358-4065 Designed and Manufactured in the USAInformation contained herein is subject to change without notice.
Downlights Page 3 of 5REV.08/06/20JL
2AR LED 2″ Adjustable Downlight – Round
TRIM TYPE DETAILS1/2″ STANDARD FLANGE TYPE
OPEN FLUSH ANGLED REGRESSED
ø2-11/16″ø3-1/2″
Ceiling Cutout: ø3″
ø2-7/16″
1/8”
ø2-7/16″
1/8”
ø2-5/8″
1/8”
ZERO-FLANGE MUD-IN
FLUSH ANGLED REGRESSED MUD FLANGE MOUNTING KIT
ø2-15/16″ø3-1/16″
Ceiling Cutout: ø4″
ø2-15/16″ ø2-15/16″
ø6-1/16″
1/8″ 5/8″ø3-1/8″
REFLECTOR FINISH DETAILSSPC Clear specular
SG Satin-glow
PW Pewter
GD Gold
CG Champagne gold
RG Rose gold
CS Clear semi-specular
WH White
BL Black
MOUNTING TYPE DETAILSNEW CONSTRUCTION IC-RATED REMODEL
ø3″
13-1/8″
9-1/8″
4-9/16″
4-9/16″
Driver and Junction Box
6-15/16″
4-1/8″
5-1/4″
12-3/4″
6-1/16″
11-13/16″
9-1/4″
ø3″
8-3/16″
4-5/8″
Cross Section
2-11/16″
5-13/16″
Driver and Junction Box
7-1/4″
2-1/16″
H.E. Williams, Inc. Carthage, Missouri www.hew.com 417-358-4065 Designed and Manufactured in the USAInformation contained herein is subject to change without notice.
Downlights Page 4 of 5REV.08/06/20JL
2AR LED 2″ Adjustable Downlight – Round
EM BATTERY DETAILSREMODEL MOUNTING EM/10W/RTS MOUNTINGAdditional plenum space required for R mounting when specified with EM battery.
PLENUM RESTRICTIONSCATALOG NUMBER
MINIMUMHEIGHT
EM/5W 9″EM/7W 11″
EM/10W 12″Shown Installed
Test buttonfrom EM Driver
RTS trim nut
RTS trim washer
RTS trim
RTS TRIM CUTOUT (Outside pan boundary)
Downlight cutout
MOUNTING HARDWARE DETAILS
F1 Integral 2-position fixed pan bracket, universal bar hanger included BA1 Adjustable butterfly pan bracket, bar hanger not included (N Mounting Type only)
CA1 Adjustable caterpillar pan bracket, universal bar hanger included (N Mounting Type only)
14″ minimum24″ maximum
Mounts to t-bar or nailer bar
Mounts to t-bar or nailer bar
14″ minimum24″ maximum
14″ minimum24″ maximum Mounts to t-bar
or nailer bar
F1 with I Mounting Type
BA2 Adjustable butterfly pan bracket, heavy-duty universal bar hanger included (N Mounting Type only)
CA2 Adjustable caterpillar pan bracket, t-bar hanger included (N Mounting Type only)
Mounts to t-bar or nailer bar
12″ minimum24″ maximum
Mounts to t-bar
11″ minimum26″ maximum
H.E. Williams, Inc. Carthage, Missouri www.hew.com 417-358-4065 Designed and Manufactured in the USAInformation contained herein is subject to change without notice.
Downlights Page 5 of 5REV.08/06/20JL
2AR LED 2″ Adjustable Downlight – Round