WATCH DISPLAY TIMESETTING A - START/STOP CHRONO BUTTON B - CROWN C - DATE WINDOW D - RESET CHRONO BUTTON E - SECONDS DIAL F - CHRONO HOURS G - MINUTE COUNTER H - CHRONO SECONDS HAND Locate the crown on your Stauer watch (see diagram part B). Please note the three crown positions (0-1-2) in part B of above diagram. 1. To set the time: Pull the crown out to position “2” (see diagram part B which will allow you to position watch hands for proper time selec- tion. Rotate the crown clockwise until the desired time is set. 2. When finished setting the time, push the crown back to the “0” (zero) position. The small second hand (dial part E) begins to rotate. SETTING THE DATE 1. Pull the crown out to position “1”. 2. Turn the crown counter-clockwise to set the date (Part C). • The date should not be adjusted between approximately 9pm and 21:00pm. 3. After the date has been set, push the crown (part B) back to position “0” (zero). USING THE CHRONOGRAPH This chronograph is able to measure and display time in 1/1th second united up to a maxi- mum of 11 hours (part F) 59 minutes (part G) 59 seconds (part E) Measuring the time with the chronograph: 1. The chronograph can be started and stopped each time button “A” is pressed. 2. Pressing button “D” resets the chronograph and the chronograph second hand (part H), chronograph minute hand (part G) and chronograph hour hand (part F) return to the zero position. To return to normal watch function: 1. Press Button “D” to zero out all of the Chronograph hands. 2. Press Button “D” again to resume normal watch functions (note that the watch second hand part “E” will return to the seconds position as if the chronogrpah feature had never been used.) INSTRUCTION MANUAL Stauer Brillante Watch CHRONOGRAPH RESET (INCL. AFTER REPLACING BATTERY) Chronograph Reset (includes after replacing the battery) This procedure should be per- formed when the chronograph second hand does not return to zero position after the chronograph has been reset and after the battery has been replaced. 1. Pull the crown out to position 2. 2. Press button “A” to set the chronograph second hand to the zero position. The chronograph hand can be advanced rapidly by continuously pressing button “A”. 3. Once the hand has been set to zero position, return the crown to the normal position. Visit us at, www.stauer.com to learn more about the fantastic benefits of owning a Stauer Watch! www.stauer.com IMPORTANT FEATURES - Quartz Movement - Chronograph - Band Width: 18mm - Wrist accommodations up to 8” - Case Thickness: 12 mm - Case Diameter 36 mm TIMESETTING CONT. Do not push the crown to the normal position while the chronograph second hand returns to the zero position. It stops on the way when the crown is returned to the normal position and its position is recognized as the zero position. ADJUSTING CLASPS To adjust a fold–over buckle bracelet, carefully remove only the pushpin from the bracelet side (not the buckle side), using a sharp pointed tool. Reposition the pin as required.

FEATURES IMPORTANT - Stauer

Download PDF Report

Upload
others
View
1
Download
0

Embed Size (px)

Citation preview

WATCH DISPLAY TIMESETTING

A - START/STOP CHRONO BUTTONB - CROWNC - DATE WINDOWD - RESET CHRONO BUTTONE - SECONDS DIALF - CHRONO HOURSG - MINUTE COUNTERH - CHRONO SECONDS HAND

Locate the crown on your Stauerwatch (see diagram part B). Pleasenote the three crown positions (0-1-2) in part B of above diagram.

1. To set the time: Pull the crownout to position “2” (see diagram partB which will allow you to positionwatch hands for proper time selec-tion. Rotate the crown clockwise

until the desired time is set.

2. When finished setting the time, push thecrown back to the “0” (zero) position. Thesmall second hand (dial part E) begins torotate.

SETTING THE DATE

1. Pull the crown out to position “1”.

2. Turn the crown counter-clockwise to set

the date (Part C).

• The date should not be adjusted betweenapproximately 9pm and 21:00pm.

3. After the date has been set, push the crown(part B) back to position “0” (zero).

USING THE CHRONOGRAPH

This chronograph is able to measure and dis-play time in 1/1th second united up to a maxi-mum of 11 hours (part F) 59 minutes (partG) 59 seconds (part E)

Measuring the time with the chronograph:

1. The chronograph can be started and stoppedeach time button “A” is pressed.

2. Pressing button “D” resets the chronographand the chronograph second hand (part H),chronograph minute hand (part G) andchronograph hour hand (part F) return to thezero position.

To return to normal watch function:

1. Press Button “D” to zero out all of theChronograph hands.2. Press Button “D” again to resume normalwatch functions (note that the watch secondhand part “E” will return to the seconds posi-tion as if the chronogrpah feature had neverbeen used.) INSTRUCTION MANUAL

Stauer Brillante Watch

CHRONOGRAPH RESET (INCL. AFTERREPLACING BATTERY)Chronograph Reset (includes after replacingthe battery) This procedure should be per-formed when the chronograph second handdoes not return to zero position after thechronograph has been reset and after the bat-tery has been replaced.

1. Pull the crown out to position 2.2. Press button “A” to set the chronographsecond hand to the zero position. Thechronograph hand can be advanced rapidly bycontinuously pressing button “A”.3. Once the hand has been set to zero posi-tion, return the crown to the normal position.

Visit us at, www.stauer.com to learn moreabout the fantastic benefits of owning a Stauer Watch! www.stauer.com

IMPORTANTFEATURES

- Quartz Movement

- Chronograph

- Band Width: 18mm

- Wrist accommodations up to 8”

- Case Thickness: 12 mm

- Case Diameter 36 mm

TIMESETTING CONT.

Do not push the crown to the normal position while the chronograph second handreturns to the zero position. It stops on theway when the crown is returned to the normal position and its position is recognized as the zero position.

ADJUSTING CLASPS

To adjust a fold–over buckle bracelet, carefullyremove only the pushpin from the bracelet side(not the buckle side), using a sharp pointedtool. Reposition the pin as required.