1
2/19 2 + + + - - - OUT 1 2 3 4 5 6 10k 2,2k Ra UOUT CH1 + 1 – 4 CH2 1 4 FB Remote I/O FB 2201 - 2213 Digital Output with Position Feed Back Product features Zone 1 or Zone 2 mounted Output for intrinsic safety solenoid valves Output for sounders and LED (only without LFD) Positive- or negative logic selectable depending on version Line monitor (LFD) depends on version Permanently self-monitoring Output with watch dog circuit for fatal errors • EMC to EN 61326 or NE21 Input: Volt-free mech. contacts or 2-wire proximity Signal type 2-wire-initiators EN/IEC 60947-5-6 / NAMUR on > 2.1 mA Switching points off < 1.2 mA Hysteresis 0.2 mA Line fault (LFD) < 1 mA short > 6 mA Output: with line monitor (LFD) short circuit protected (see below) Watch dog Output OFF 0.5 s after serious fault Power consumption 0.52 W - 1.8 W depending on version Explosion protection: Category II 2 (1/2) GD EEx d [ia] IIC Approval PTB 97 ATEX 1047 U sensor circuit Uo 14 V, ISC 16 mA, Po 55 mW IIC Safety values (linear) Co 418 nF, Lo 5 mH output circuit see table Ordering details Uout/V Ra/ Limit/mA LFD/ Uo/V IO/mA PO/mW CO/nF LO/mH Type Order No. 22.0 315 50 20...2000 24.9 91 558 79 1 FB 2201 B GHG 127 0000 B2201 24.0 210 75 1) 110...1200 27.8 183 1270 227 1) 1.9 1) FB 2202 B GHG 127 0000 B2202 24.0 360 50 70...2000 27.8 91.5 636 69 0.4 FB 2203 B GHG 127 0000 B2203 22.0 220 50 220...1300 24.2 145 872 92 0.27 FB 2204 B GHG 127 0000 B2204 22.0 220 50 2) 220...1300 24.2 145 872 92 0.27 FB 2204 D GHG 127 0000 D2204 22.8 290 50 150...2000 25.2 108 681 74 0.5 FB 2205 B GHG 127 0000 B2205 25.3 329 25...3500 27.8 108 751 81 0.19 FB 2212 B GHG 127 0000 B2212 25.3 329 2) 25...3500 27.8 108 751 81 0.19 FB 2212 D GHG 127 0000 D2212 26.7 509 40...7000 28.7 68 485 69 0.4 FB 2213 B GHG 127 0000 B2213 26.7 509 2) 40...7000 28.7 68 485 69 0.4 FB 2213 D GHG 127 0000 D2213 1) only group II B 2) output without LFD no longer required since the test pulse can be deactivated via software for modules delivered after March 07.

FB 2201 - 2213 Digital Output With

  • Upload
    manit

  • View
    55

  • Download
    0

Embed Size (px)

Citation preview

Page 1: FB 2201 - 2213 Digital Output With

2/19

222

+ + + - - -

OUT

1 2 3 4 5 6

10k

2,2k

RaUOUT

LB Remote I/O

CH1

+ 1 – 4

CH2

1 4

FB Remote I/O

FB 2201 - 2213Digital Outputwith Position Feed Back

Product features• Zone 1 or Zone 2 mounted• Output for intrinsic safety solenoid valves• Output for sounders and LED

(only without LFD)• Positive- or negative logic selectable

depending on version

• Line monitor (LFD)depends on version

• Permanently self-monitoring• Output with watch dog circuit for fatal errors• EMC to EN 61326 or NE21

Input:Volt-free mech. contacts or 2-wire proximitySignal type 2-wire-initiators EN/IEC 60947-5-6 / NAMURon > 2.1 mASwitching points off < 1.2 mA

Hysteresis 0.2 mALine fault (LFD) < 1 mAshort > 6 mA

Output:with line monitor (LFD) short circuit protected (see below)Watch dog Output OFF 0.5 s after serious faultPower consumption 0.52 W - 1.8 W depending on version

Explosion protection:Category II 2 (1/2) GD EEx d [ia] IICApproval PTB 97 ATEX 1047 U

sensor circuit Uo 14 V, ISC 16 mA, Po 55 mWIIC Safety values (linear) Co 418 nF, Lo 5 mH

output circuit see table

Ordering detailsUout/V Ra/ Limit/mA LFD/ Uo/V IO/mA PO/mW CO/nF LO/mH Type Order No.

22.0 315 50 20...2000 24.9 91 558 79 1 FB 2201 B GHG 127 0000 B220124.0 210 75 1) 110...1200 27.8 183 1270 227 1) 1.9 1) FB 2202 B GHG 127 0000 B220224.0 360 50 70...2000 27.8 91.5 636 69 0.4 FB 2203 B GHG 127 0000 B220322.0 220 50 220...1300 24.2 145 872 92 0.27 FB 2204 B GHG 127 0000 B220422.0 220 50 2) 220...1300 24.2 145 872 92 0.27 FB 2204 D GHG 127 0000 D220422.8 290 50 150...2000 25.2 108 681 74 0.5 FB 2205 B GHG 127 0000 B220525.3 329 – 25...3500 27.8 108 751 81 0.19 FB 2212 B GHG 127 0000 B221225.3 329 – 2) 25...3500 27.8 108 751 81 0.19 FB 2212 D GHG 127 0000 D221226.7 509 – 40...7000 28.7 68 485 69 0.4 FB 2213 B GHG 127 0000 B221326.7 509 – 2) 40...7000 28.7 68 485 69 0.4 FB 2213 D GHG 127 0000 D2213

1) only group II B2) output without LFD no longer required since the test pulse can be deactivated via software for modules delivered after March 07.