Fax 504-733-1848 Dyke ... · Woodfold Accordion Doors 7. Doors - Leaded Glass. 5 Exterior Door Units. Steel and Fiberglass 4-C. Exterior Door Units Wood. 4-B & 5 Fiberglass Columns

504-733-8500800-229-3953Fax 504-733-1848email: [email protected] https://NewOrleans.DykeDoors.com

You can also navigate using the “Pages” tab and scrolling through thumbnails of the pages. This method may help you find the particular

moulding you are looking for in the moulding section.

Dyke Industries, Inc.Building Materials and Millwork since 1866

301 Evans Road

New Orleans, LA 70123

LIST PRICE CATALOG

On the left side of your Acrobat® Reader, you should see a “Bookmarks” tab, clicking on it will reveal the chapters of the catalog. Clicking on the “+” next to each chapter will expand that chapter and bring up a list of the pages within that chapter. Click on a page link to

jump to that page.

Note: This catalog represents products and pricing for

Dyke Industries, Inc. - NEW ORLEANS Location only.

F.O.B. New Orleans or Delivered our Truck. Prices Subject To Change Without Notice.

October2019

v -10.21.19

mailto:[email protected]

https://NewOrleans.DykeDoors.com


October 2019

Dyke Industries, Inc.

New Orleans, LA 70123504-733-8500 800-229-3953 fax 504-733-1848

email [email protected]

Note: This catalog represents products and pricing for Dyke Industries, Inc. - NEW ORLEANS Location only.

LIST PRICE CATALOG

Building Materials and Millwork since 1866

Building Materials and Millwork since 1866301 Evans Road





October 2019

On the left side of your Acrobat® Reader, you should see a “Bookmarks” tab, clicking on it will reveal the chapters of the catalog. Clicking on the “+” next to each chapter will expand that chapter and bring up a list of the pages within that chapter. Click on a page link to

jump to that page.


301 Evans Road


LIST PRICE CATALOG

You can also navigate using the “Pages” tab and scrolling through thumbnails of the pages.

Note: This catalog represents products and pricing forDyke Industries, Inc. - NEW ORLEANS Location only.




October 2019



LIST PRICE CATALOG

Note: This catalog represents products and pricing for Dyke Industries, Inc. - NEW ORLEANS

Location only.

504-733-8500 800-229-3953 fax 504-733-1848email [email protected]

Building Materials and Millwork since 1866




504-733-8500800-229-3953Fax 504-733-1848email: [email protected]

August 2019

Section Contents

1 Introduction

3 Aluminum & Vinyl Windows

4 Interior Doors and Door Units

4-A Interior Bifold & Pocket Units

4-B Exterior Door Frames

4-C Exterior Fiberglass & Steel Units

5 Exterior Fir and Mahogany doors

6 Vinyl Shutters, Wood Screen Doors

7 Room Divider / Accordion Doors

10 Sills & Door Weatherstripping

11 Mouldings

12 Stair Parts, Attic Stairs, Columns

13 Door Locks

18 Barn door Hardware, Misc Door Hardware

19 Louver Products, Fireplace Mantles




August 2019

Catalog Index

DESCRIPTION Section

Aluminum Sills 10

Aluminum Windows 3

Attic Stairs 12

Barn Door Hardware 18

Bifold Doors & Units Interior 4-A

Blinds Exterior Decorative Vinyl 6

Block Windows Glass and Acrylic 2

Cafe Doors Wood 6

Cased Openings Interior 4-A

Casing and Trim Exterior - Corner & Plinth Blocks 4-A

Casing and Trim Interior - Corner & Plinth Blocks 4

Casing and Trim Lineal Moulding and Casing Sets 11

Closet Rods Adjustable Aluminum 18

Columns Fiberglass & Wood 12

Decorative Windows 2

Door Unit Frames Exterior - Fir, Mahogany, Primed, Composite 4-B

Door Units - Exterior Steel and Fiberglass 4-C

Door Units - Interior Bifold, Bypass, & Pocket 4-A

Door Units - Interior - Single and Double 4

Doors - Bifold, Carton Packs and Units 4-A

Doors - Interior 4

Doors - Exterior Wood - Fir, Mahogany 5

Doors - Woodfold Accordion Doors 7

Doors - Leaded Glass 5

Exterior Door Units Steel and Fiberglass 4-C

Exterior Door Units Wood 4-B & 5

Fiberglass Columns 12

Fiberglass Door Units 4-C




August 2019

Catalog Index

DESCRIPTION Section

Fire Rated 20 Minute Rated Frames and Doors 4-A&C

Hardware Bifold, Bypass, & Pocket 4-A

Hardware Hinges, Stops, etc. 18

Hardware Door Locks 13

Leaded Glass Doors Wood 5

Locksets 13

Louver Inserts For Wood Doors 5

Louvers Gable-End 19

Mahogany Doors 5

Mantles MANTLECRAFT 19

Mouldings Solid Fir, Primed, MDF 11

Patio Door Units Fiberglass 4-C

Pocket Door Frames Interior 4-A

Porch & Deck Rail Vinyl QuickRail 12

Screen Doors Wood 6

Shutters Decorative Vinyl 6

Sills Aluminum 10

Sill Pans 10

Skylights 19

Stair Parts 12

Steel Door Units 4-C

Steel Door Frames Adjustable Steel Frames 4-C

Thresholds Aluminum Sills 10

Transoms Interior Transom Frames 4-A

Transoms Exterior 4-B&C




August 2019

Catalog Index

DESCRIPTION Section

Weatherstrip Q-Lon 10

Windows - Aluminum 3

Windows - Vinyl 3

Windows - Decorative 2

Wood Columns 12

Wood Exterior Door Unit Frames 4-B



504-733-8500 - 800-229-3953Fax [email protected]

INFORMATION Page 1Effective: January, 2018

Cancels: All Previous

General Information

TERMS AND CONDITIONS OF SALE

SALES POLICY

TERMS AND CONDITIONS OF SALES

Prices - All prices in this book are a LISTING PRICE.

LOSS AND DAMAGE CLAIMS

Our company is appreciative of your interest in doing business with us, and we continually strive to service you in such a way that we can add to the efficiency and profitability of your business. The following policies and guidelines have developed over many years so that we can become a better supplier to you, and we ask that you read this information carefully to avoid any misunderstandings and strengthen our partnership in the building industry. The future of our Company and our many employees is dependent on the continued success of you, our customer. We feel it is one of our primary responsibilities to keep you properly informed and to enable you to better serve your customers.

Management reserves the right to sell only to those individuals or concerns deemed credit-worthy and who meet the parameters of our marketing program. Possession of our catalog by any person or firm in no way represents any implied contract of offer to sell any of the merchandise listed herein.

Term Discounts - Our cash discount is 1% 10th of the following month; net the 15th. Direct shipment terms are 1% five days after arrival of the merchandise. Amounts past due are subject to a service charge of 1/1/2% per month unless applicable laws require a lesser charge. Federal law dictates that all customers are subject to the same discount and service charge policy.

We work very hard to ensure that all your merchandise is delivered to you in good condition. We ask you to carefully inspect all shipments for accuracy and for any possible damage. In the event of damage, please refuse the merchandise at the time of delivery and it will promptly be re-shipped. In the event of minor damage that is questionable and may warrant keeping subject to your customer's inspection, please note this clearly on the shipping document. Any damage or loss on a shipment made by common carrier will have to be handled by a freight claim with the carrier or shipper. This is your responsibility and needs to be handled promptly, and our office will be glad to assist you in any way possible.

F.O.B. New Orleans or Delivered our TruckPrices Subject To Change Without Notice





General Information

SHORTAGES AND ERRORS

HOW TO ORDER

Orders can be sent by fax - 504-733-1848 - , or email - [email protected]

SPECIAL ORDERS

Orders for special order material and millwork fabricated for you are not returnable and may not be cancelled after the order is placed.

Written orders are always preferable to verbal orders as they reduce mistakes. Door Unit Order Forms, as shown at the back of this section, are available from your sales representative, or by calling our office. These forms are formatted to help get all the needed information for door unit production, in a logical order. In many cases this will help expedite your order.

Shortages of materials and errors in entering or shipping orders should be reported to us immediately. Delay and expense can often be avoided by prompt and careful check of order acknowledgment. All material should be inspected immediately upon delivery, and all claims for defective material should be filed before installing or finishing.

Chance of delay and confusion can be minimized by giving full and complete information when ordering. Always give: (1) Quantity; (2) Item (door, window, etc.); (3) Size (Width first, Height second, Thickness third); (4) Number of lights; (5) Designname or number; (6) K.D. or set up; (7) Specie of wood; (8) Any other helpfulinformation.

As architecture continues to change, windows and doors have become much more complex to such an extent that virtually every home being built requires products that are non-stock and must be SPECIAL-BUILT AND SPECIAL ORDERED. Because of the extended lead times in these products, along with the fact that they are non-returnable, it is essential that any mistakes or changes be caught before manufacture. For this reason, we ask that all special orders be faxed or mailed to us as confirmations before being ordered. We will promptly enter your orders upon receiving your signed confirmation. This will ensure that we can accurately order what is needed the first time, rather than trying to solve a problem months after it was ordered.







General Information

RETURNED GOODS

PRICE CHANGES

Prices are F.O.B. our warehouse or delivered our trucks.

Special Order Items and Manufactured Items (door units, window units, etc.) or, products that have been stained, painted,damaged, or altered in any way may not be returned.

Do not return any material without first obtaining authorization. Our field sales representatives will assist you in handling returns. Office personnel are not authorized to sign pick-ups, nor are our drivers allowed to pick up merchandise without an authorized pick-up. Request for pick up should include original order number or invoice number. No credit will be given for material returned without prior authorization. Following these procedures carefully will allow us to issue credit in an accurate and timely manner.

Market conditions are uncertain and it is not possible for us to guarantee the prices published herein. All prices, therefore, are subject to change without notice.

Any stock merchandise, in the original unopened carton, that is in salable condition may be returned within thirty (30) days of receipt, will be credited at invoice price, subject to a restocking charge. Return freight, UNLESS PREPAID, will be deducted. If the return is due to our error, no charge for freight or handling will be made.






General Information

WARRANTY STATEMENT

1. NOTIFY YOUR SALESPERSON IMMEDIATELY. HE OR SHE WILL INSPECTTHE PRODUCT AND MAKE A WRITTEN REPORT ON YOUR BEHALF TO US. ANY DELAY IN REPORTING A PROBLEM MAY VOID THE WARRANTY.

When a jobsite inspection is needed it is imperative that a representative of your company accompany our representative, and/or the manufacture's representive for the inspection. This will help to insure that all parties understand what was observed and agreed upon.

ALL PRODUCTS IN THIS CATALOG ARE WARRANTED BY THE VARIOUS MANUFACTURERS WE BUY FROM. WITHOUT EXCEPTION, ALL ARE VERY SPECIFIC ABOUT HOW THEIR PRODUCTS ARE STORED, PAINTED, INSTALLED AND MAINTAINED, AND HOW LONG THE PRODUCT HAS BEEN IN USE. WITHOUT EXCEPTION, ALL WARRANT THE PRODUCT ONLY. NO INSTALLATION OR FINISHING COST ARE INCLUDED. WE DO NOT ACCEPT ANY RESPONSIBILITY BEYOND THE WARRANTY OF OUR SUPPLIERS. We find the most common reasons for complaints are installation problems with square, level, plumb and shimming; and the painting and finishing of the product.

2. WE WILL SUBMIT THE CLAIM IN WRITING TO THE MANUFACTURER WHOWILL EVALUATE THE CLAIM AND MAY AUTHORIZE US TO ACT IN THEIR BEHALF. SOMETIMES THE MANUFACTURER REQUIRES THEIR REPRESENTATIVE TO ALSO INSPECT THE PRODUCT.

THE MANUFACTURER AND DYKE INDUSTRIES ARE NOT LIABLE FOR ANY PRODUCT REPAIRED OR REPLACED WITHOUT PRIOR CONSENT.

Please see each manufacturer's warranty information for specific details. Copies are included in our price catalog or, are available from your sales representative.

We hope this information will be helpful to you and your customers.

IF YOU EVER EXPERIENCE A CLAIM, THEN THE FOLLOWING PROCEDURE WILL HELP YOU AND YOUR CUSTOMER:






General Information

SYNTHETIC STUCCO

What Causes Rot ?

Over the past several years, numerous problems have surfaced concerning rot and deterioration of wood millwork when used in conjunction with synthetic stucco applications. This problem is serious enough that several states and counties have placed moratoriums on the use of this product, and there are several class action lawsuits against the synthetic stucco manufacturers now in litigation. As a result of this, many of the label window manufacturers will no longer warrant their product when used in this application. We have taken the position that until this application has been improved and stands a longer test of time, we cannot recommend our wood door and window units be used with synthetic stucco. We will not be able to warrant these products. We strongly encourage our customers to consider the new synthetic products that are now on the market, along with new products being developed, such as vinyl, fiberglass and other composite materials.

Dyke Industries, as do most millwork suppliers, use quality products in the manufacture of our door and window units. However nothing that we do can prevent wood from rotting if the proper installation, finishing, and care for these products is not enlisted by the builder and consumer.

Wood rot is caused by fungi that require air, warmth, and moisture for growth. Wood that is kept dry will not rot. Wood that is allowed to stay wet will probably decay.

All wood components that we use in an exterior unit are treated with wood preservatives. Because of government regulations regarding environmental concerns the removal of many of the protective agents has caused these preservatives to be less effective. Paints have also had many of their protective agents removed for these same reasons. This is why it is very important to finish these products with the recommended procedures and periodically check to assure that the finish is maintained.

We do offer upgraded products that are rot resistant and/or made with composite materials.






General Information

INSTALLATION INSTRUCTIONS

Exterior Door Units -

Place unit in opening and temporarily tack unit in place on the hinge side only. Plumb the hinge jamb in both directions. Place shims behind each hinge. Using finish nails (or screws) secure hinge jamb at each hinge through the shims being careful to check that the jamb stays plumb and that the reveal between door and jamb is uniform the entire length. Do not drive nails and screws in completely at this time.

General Information. Please see specific manufacturer's installation instructions for their recommended installation instructions.

The manufacturers installation and finishing instructions must be followed to comply with their specific warrantees. To insure that door and window units operate and function as designed, proper installation is critical. Basic installation instructions are as follows (See manufacturer's instructions for their specific recommendations) :

Check rough opening for proper size (approximately 1/2" greater than unit width and height at outside of jamb), plum, square and level. On exterior units two or three large beads of caulk should be placed under where the sill is positioned, the entire length of the opening. A sill pan and/or sill gasket is highly reccomended.

ALL PRODUCTS, INTERIOR OR EXTERIOR, CONTAINING WOOD MUST BE PROTECTED FROM WATER, MOISTURE, AND HUMIDITY, AND SHOULD BE FINISHED, IMMEDIATELY

AFTER DELIVERY.

Keeping door in the closed position, adjust the strike jamb with shims to maintain the same margin between door and jamb at top and lock side. Also adjust so that the door is making even contact with stop (or weatherstrip). Secure this jamb with finish nails or screws through the shims at the top, bottom and behind the strike.

Open the door to make sure that it functions properly. Close door again and check to see that the reveal between the door and frame is even at the top and both sides and that contact with stop or weatherstrip and the door is maintained. Adjust if needed. Set nails (or screws). We recommend on all exterior doors that at least one screw in each hinge be replaced with a 2-1/2" long screw through the jamb and into the framing stud to prevent sag caused by the weight of the door.

Apply caulk around the perimeter of the frame; around all outside casing; where the sill meets the jamb; and at the front of the sill where it meets the floor. All wood components should be finished as soon as possible. See manufacturer's specific recommendations on finishing. (A prime coat is not a finish and does not offer protection from the elements). All six sides (both faces, as well as, top and bottom and both edges)of a door must be finish painted.






General Information


Window Units -

Interior Door Units -

General Information. Please see specific manufacturer's installation instructions for their recommended installation instructions.

Check rough opening for proper size (approximately 1/2" greater than window unit width and height at outside of jamb), plum, square and level. Set unit in rough opening, square, level, and plumb. Shim between side jambs, head and sill, and recheck for squareness and plumb. Re-check unit before final installation is complete. Installer is responsible for caulking and flashing around entire perimeter of unit at joint of frame and siding, and the caulking of joints at sills before painting.

Check rough opening for proper size (approximately 1/2" greater than door unit width and height at outside of jamb), plum, square and level.

Place unit in opening and temporarily tack unit in place on the hinge side only. Plumb the hinge jamb in both directions. Place shims behind each hinge. Using finish nails secure hinge jamb at each hinge through the shims being careful to check that the jamb stays plumb. Do not drive nails in completely at this time.

Keeping door in the closed position, adjust the strike jamb with shims to maintain the same margin between door and jamb at top and lock side. Also adjust so that the door is making even contact with stop. Secure this jamb with finish nails through the shims at the top, bottom and behind the strike.

Open the door to make sure that it functions properly. Close door again and check to see that the reveal between the door and frame is even at the top and both sides. Adjust if needed. Set nails. We recommend on some of the heavier interior doors, that at least one screw in each hinge be replaced with a 2-1/2" long screw through the jamb and into the framing stud to prevent sag caused by the weight of the door.

See manufacturer's specific recommendations on finishing. All interior door units must be finished on all six sides ( both faces, edges, and top and bottom).






General Information


FINISHING INSTRUCTIONS Exterior Products

These are basic instructions to follow for our door and window units:

General Information. Please see specific manufacturer's installation instructions for their recommended installation instructions

7. "Bridge" the paint at all joints between mouldings and other surfaces of doors to ensure that there are no gaps.

8. Since all wood will move with seasonal weather changes, we recommend that all wood windows and doors be inspected every six months. The paint finish and the seal between all surfaces should be checked to insure that they are not broken.

3. Windows and doors should be painted immediately after installation to avoid damage.

4. Excess caulking (squeeze out) between glass and wood should be removed prior to painting.

5. Apply oil-based prime coat and two or three coats of finish paint to all surfaces. (Jambs and trim should be back primed before installation.) Doors must be primed and finished painted on ALL SIX SURFACES (both faces, two side edges, top and bottom). If door has a bottom sweep, remove it, properly finish bottom of door, then re-install sweep.

6. On windows, and doors with glass, the paint, and/or silicone caulking, must lap or "bridge" onto the glass 1/16" to ensure proper seal. Do not break this seal when cleaning excess paint from the glass. If seal is broken water will get to the wood and lead to deterioration.

Wood is one of the most versatile and beautiful products used in the manufacture of exterior windows and doors. We use engineered products from reputable manufacturers designed to give many years of trouble free use. However proper finishing immediately at installation and continued maintenance is needed for a lifetime of satisfaction.

Each manufacturer has specific recommendations on the painting and finishing of their products. Failure to follow these instructions could void the manufacturer's warranty.

1. Fill all nail holes and caulk all joints. Caulk the perimeter of unit between trim and siding material.

2. Clean and sand with fine sandpaper before finishing. Surface must be clean and dry. Materials should be allowed to "dry out" after damp weather. Do not finish in damp weather.



Fax Page ____of _____ JOB ORDER -

(Total pages in this fax) PAGE ______

OF ________

DATE (Number of pages for this job)

Requested date

fax contact phone #

JOB NAME Ship Via ___Delivery ___ Will call

city/state zip

_____WOOD UNITS OR ____STEEL ____SMOOTH FBRGLS ____TXTURD FBRGLS

_____SINGLE UNITS _____DBL UNITS _____ W/SIDELITES _____W/TRANSOM

JAMB JB WIDTH SILL O/S CASING OPEN HINGE COLOR

____FRAMESAVER w/strip** ___4-5/8" * ___MILL FXD ____WM180 ___OPEN IN __DULL BRS - 2D

____PF WHT PRMD COMP* w/strip ___5-1/4" * ___MILL ADJ ____NO CASING ___OPEN OUT __BRT BRASS - 3

____PRMD w/strip ___5-1/2" ___BRZ FIXED ____PF COMP 180 ___FIXED __SAT NICKL -15

____CLR FIR w/ w/strip ___6-9/16" * ___BRZ ADJ ____5/4 X 4 FIR ___Various - __SAT CHRM -26D

____MAHOGANY w/ w/strip ___8-7/8" ** ___BRSS ADJ ____5/4 X 4 PRMD BORE __DRK BRZ - 10B

____Clr FIR - No W/Strip ___ Various ___MILL ADA ____1X4 ____SINGLE __PRIMED

____PRIMED- No W/Strip Other ______ ___Opn Out Bmper ___1X4 w/180 ____DOUBLE __OTHER __

___Various - ___OTHER______________ ____NO BORE

___Various -

** FrameSaver = primed with composite bottom frame and WM180 . * PF WHT COMP = Primed all composite frame and WM180For various jambs, sills, casing, NOTES:etc., mark "VARIOUS" aboveand specify in DESCRIPTION.

QUAN. SWING SIZE DESCRIPTION

Please copy as needed. 2/18/13

phone: ordered by:

EXTERIOR UNITS

PRICE

Dyke Industries, Inc

fax: 504-733-1848

email: [email protected]

CUSTOMER P O #


blank

Fax Page ____of _____ JOB ORDER -

(Total pages in this fax) PAGE ______

OF ________

DATE (Number of pages for this job)

Requested date

fax contact phone #

JOB NAME Ship Via ___Delivery ___ Will call

city/state zip

Type of Unit OR OR

_____SINGLE UNITS _____DBL UNITS _____ CASED OPENINGS & _____BIFOLDS

JB WIDTH JAMB CASING BORE HINGE COLOR

_____PRIMED flat ____SINGLE ____DULL BRS - 2D

_____4-7/8" _____CLR FIR flat ____DOUBLE ____SAT NICKL -15

_____5-1/4" _____PRIMED split adj. ____NO BORE ____SAT CHRM -26D

_____5-1/2" _____CLR FIR split adj. ____BALL CATCHES ____PRIMED

_____6-9/16" ____BRT BRASS - 3

_____7-1/4" ____ANT NICKL -15A

_____FJ 2-1/4" WM356 ____DRK BRZ - 10B

____OTHER

______________

_____NO CASING

_____4-5/8"

_____CLR FIR 2-1/4" WM324

_____CLR FIR 3-1/4" C-11

_____Various

List Widths in

Description

_____PRMD 2-1/4" WM 324

_____PRMD 3-1/4" C-11

_____PRMD 3-1/4" C24

_____PRMD 4-1/4" C12

_____CLR FIR 2-1/4" WM356

Dyke Industries, Inc

fax: 504-733-1848

email: [email protected]

phone:

P O #

ordered by:

INTERIOR UNITS

CUSTOMER

_____PRMD 3-1/2" RB-3

_____PRMD 2-1/4" WM356

_____NO CASING

QUAN. SWING SIZE DESCRIPTION


NOTES:

PRICE



blank

504-733-8500 [email protected]:// NewOrleans.DykeDoors.com

Section 2 Page 1Effective: August 2019

DecoGlassGlassCraft Decorative Bath and Spa Windows

Image Series

NUMBER DESCRIPTION SIZE LIST PRICE PRODUCT CODE

XCD 4848 R Canterbury 49-5/8" x 49-5/8"

XAD 4848 R Amhurst 49-5/8" x 49-5/8"

XMD 4848 R Manchester 49-5/8" x 49-5/8"

Rough opening = 50" x 50"

These are just a few of many DecoGlass styles available from GlassCraft Doors.

See their entire collection at www.gcdoor.com/deco.asp

or use the link on our website atwww.dykeind.com/new orleans

SPECIAL ORDER - Please call for a quote.

NON-STOCK

Window Frames are constructed using "Marley" composite, no-rot, material on the exterior and clear wood on the interior side. The exterior features a composite sill nosing and brick moulding.

The Image series is a double glazed window with decorative, obscure , tempered glass (designs shown below) which is permanently secured to another piece of clear tempered safety glass.

The Image Series offers both beauty and value for decorative windows to use in the bath, spa, entryway, stairway, or kitchen

F.O.B. New Orleans or Delivered our Truck. Prices Subject To Change Without Notice



Section 2 Page 2Effective: August 2019

Acrylic Block Windows

ACRYLIC BLOCK WINDOWS

Tan Aluminum Framed Stock

4242 Crystal View

White Vinyl Framed 1-1/2" x 8" Colonial Block non-stock

Model Frame Size Blocks R.O.

FB3434-V 34" x 34" 4 x 4 34-3/4" x 34-3/4"

FB4242-V 42" x 42" 5 x 5 42-3/4" x 42-3/4"

FB5050-V 50" x 50" 6 x 6 50-3/4" x 50-3/4"

White Aluminum Framed 1-1/2" x 8" Clear Wave Blocknon-stock

FB 4242-A 42" x 42" 5 x 5 42-3/4" x 42-3/4"

FB 5050-A 50" x 50" 6 x 6 50-3/4" x 50-3/4"

NON-STOCK

Acrylic Block windows are much more than asubstitute for glass block. The lightweight,economy, and energy efficiency of acrylicblocks have expanded the market for "theglass block look" in residential construction.This durable and attractive block windowsinstalls in minutes just like the other windowson the job.






504-733-8500 [email protected]

https:// NewOrleans.DykeDoors.com

Section 3 Page 1Effective: May 2019

WINDOWSKrestmark Series 100 White ALUMINUM with LowE

SPECIAL ORDER - Not Stocked


fl Dyke Industries, Inc. New Orleans

Building Materials and Mil/work Since 1866

- LU I U 100

Aluminum 100

The 100 series aluminum window is a single hung window with spiral balance .

. Available as Single Hung, Single Vent

Sliders, Picture Windows and Architectural Shapes. Call out size is actual window size; a 2030 measures 24" x 36"

Features

• Colors: Wh ite , Bronze and Sandstone. (Mill f inish available for Series 100 on ly).

• Alum inum is tremendously strong and stable , it wi ll not swell , shrink, split , crack or check over years of service. It is very durable and can 't rust.

• The Extruded frame w ith integral nailing fin and sash members are commercial quality 6063 T5 Aluminum. Frame corners are mechanically fastened with non-magnetic steel or other non-corrosive materials compatible w ith aluminum such as zinc-plated steel properly

treated for corros ion resistance .

• All 4 frame corners and meeting ra il connections are sealed w ith Polyseamseal to keep the weather out and reduce air infiltration .

• Sash members are interlocked for addit ional strength at corners and locking rai l.

• Two positive sash locks reduce air infiltration. (should remain locked when installing).

• Weatherstripping : The perimeter of the movable sash is w eatherstripped w ith w ool pile

and/or soft vinyl for qu iet, smooth operation to resist weather penetration and reduce air

infiltration against normal elements when the units are closed and locked.

• 5/8" insulated glass with Warm Edge Glass spacer.

• Sloped sill for easy water run off. Corners are sealed w ith Polyseamseal.

• Quality certified in accordance with AAMA specifications.



https:// NewOrleans.DykeDoors.com


WINDOWSKrestmark Series 100 White ALUMINUM with LowE


Divided Light 1/1 Light

New Construction aluminum window. Non-Tilt

Available in Bronze, Sandstone, and Mill ADD 4%

Size Divided Lite List Price Lites List Price

2-0 3-0 D L 179.09 1/1 174.602-0 3-0 OBS D L 195.99 1/1 191.072-0 4-0 D L 212.03 1/1 206.782-0 5-0 D L 244.83 1/1 239.222-0 6-0 D L 273.74 1/1 266.34

2-6 3-0 D L 272.09 1/1 272.092-6 4-0 D L 302.54 1/1 302.542-6 5-0 D L 272.09 1/1 272.092-6 6-0 D L 302.54 1/1 302.542-6 7-0 D L 333.96 1/1 333.96

2-8 3-0 D L 215.99 1/1 208.632-8 4-0 D L 253.94 1/1 245.492-8 5-0 D L 291.92 1/1 282.712-8 6-0 D L 326.34 1/1 314.422-8 7-0 D L 360.56 1/1 345.97

3-0 3-0 D L 233.24 1/1 225.523-0 4-0 D L 273.41 1/1 264.563-0 5-0 D L 313.73 1/1 304.003-0 6-0 D L 349.40 1/1 336.803-0 7-0 D L 387.42 1/1 372.21

4-0 4-0 D L 322.25 1/1 322.25

NON-STOCKSPECIAL ORDER

Divided Lite w/ half screen 1/1 Lite w/ half screen




// /

/ / /

/

/ / / / /

/ / / / /

1/ // / / ✓


504-733-8500 800-229-3953 [email protected]:// NewOrleans.DykeDoors.com


WINDOWSKrestmark Series 400 White VINYL with LowE





Vinyl 400 VINYL 400

The Vinyl Series 400 is an energy efficient w indow, used primarily for new construction but shou ld not be ruled out as

remodel or replacement option in certain applications Its contemporary design and clean trim lines are similar to those of

much more expensive wood clad windows and includes integral nai l fin _ With certa in LoE glass and argon glass options,

this window becomes an Energy Star® certified window el igible for a tax credit.

Available as Sing le Hung, Single Vent Slider, Picture Windows and Architectural Shapes. Call out size is ½" larger than

window size; a 2030 actual size is 23 ½" x 35 ½". Not available in custom sizes.

Features

• Colors : W h ite , Pebblestone, and Clay.

• Multi-chambered extruded vinyl frame and sash provides stabil ity w ith excellent strength ,

thermal resistant properties and is extremely low ma intenance. V in yl extrusions have

superior sound absorption and continuous color throughout min imizing unsightly scratches.

• Fu sion w elded corners in frame and sash p rovides strength and v irtually e liminates air and

w ater infiltration.

• Pocket s ill for reduced air infiltration w ith w eep system .

• Integra l pre-punched na il f in adds strength , is a w eather tigh t barr ier and ease of

installation .

• Du al w eatherstrip system reduces a ll w eather a n d air infiltration to meet or exceed national

testing standards.

• Du al pane 5/8" insu lated glass w ith Warm Edge Technology Spacer.

• T ilt-in removable bottom sash for ease of cleaning has dual sash locks on un its 18" and

w ider reducing a ir infiltration , recessed tilt latches, two integral lift ra ils adds strength and for

easy convenient operation .

• Metal reinforced meeting and lock ra il for added strength , positive locking and reduces air

infiltration.

• Block & tackle balances provide smooth operation , locking shoes prevent sash from fall ing

out when tilting for cleaning or removal .

• Combination units are made with continuous head and sill provides added structural

stability and strength during installation.






Divided Light 1/1 Light

Also available in Clay and Sandstone at no upcharge

Size Divided Lite List Price Lites List Price

2-0 3-0 D L 196.61 1/1 188.032-0 3-0 OBS D L 215.29 1/1 205.852-0 4-0 D L 230.90 1/1 220.182-0 5-0 D L 266.31 1/1 254.502-0 6-0 D L 297.40 1/1 281.33

2-6 3-0 D L 228.95 1/1 213.94 2-6 4-0 D L 267.76 1/1 250.60 2-6 5-0 D L 307.40 1/1 287.03 2-6 6-0 D L 341.72 1/1 317.06 2-6 7-0 D L 376.04 1/1 344.95

2-8 3-0 D L 238.59 1/1 222.522-8 4-0 D L 277.43 1/1 259.182-8 5-0 D L 318.12 1/1 297.762-8 6-0 D L 354.59 1/1 327.792-8 7-0 D L 389.99 1/1 357.82

3-0 3-0 D L 256.44 1/1 240.373-0 4-0 D L 297.00 1/1 279.023-0 5-0 D L 340.40 1/1 320.033-0 6-0 D L 379.01 1/1 351.123-0 7-0 D L 416.56 1/1 383.30

4-0 4-0 D L 364.78 1/1 337.99



Produc




// /

/ / /

/

/ /, / / /

/ / / / /

'i / / / /

,









Vinyl 200/275 The Series 200 New Construction Window is cleanly

designed with a smooth beveled exterior profi le giving

it a nice bold appearance and integral pre-punched

nai l fin. The Series 275 New Construction Window is

designed with a profiled exterior simulating a wood

brickmould look. The 275 also includes an integral

pre-punched nai ling fin . Available as Single Hung,

Picture Window and Arch itectural Shapes. Call out

size is ½" larger than window size; a 2030 is 23 ½" x

35 ½".

Features

•

•

Colors: White , Pebblestone, and Clay .

Multi-chambered extruded vinyl frame

and sash provides stabil ity with

excellent strength, thermal resistant

properties and is extremely low

maintenance. Vinyl extrusions have

superior sound absorption and

continuous color throughout minimizing

unsightly scratches.

• Fusion Welded corners in frame and

sash provides strength and virtua lly

el iminates air and water infi ltration.

• Sil l features a combined sloped and

weep system ensuring quick and easy

water run off.

• Integral pre-punched nail fin adds

strength , is a weather tight barrier and

ease of installation .

YI lQO WTUIIOfl Ill 20ll EXTERIOR

• Dual weatherstrip system reduces all

weather and air infi ltration to meet or

exceed national testing standards.

• Dual pane 5/8" insu lated glass with

Warm Edge Spacers (Spacer type may

vary).

• Tilt-in removable bottom sash for ease

of cleaning has dual sash locks on units

18" and wider reducing air infi ltration ,

recessed tilt latches, integral lift rail

adds strength and for easy operation .

• Metal reinforced meeting rail for added

strength , positive locking and reduces

air infiltration.

• Block & tackle balances provide smooth

operation , locking shoes prevent sash

from fa lling out when tilting for clean ing

or removal.

• Combination units are made w ith

continuous head and si ll provides

added structural stability and strength

during installation .






New Construction aluminum window. Non-Tilt

For the Series 275 with Tilt Bottom Sash ADD


Size Divided Lite List Price

2-0 3-0 D L 239.29 1/1 234.332-0 3-0 OBS D L 262.14 1/1 256.672-0 4-0 D L 282.66 1/1 276.452-0 5-0 D L 322.37 1/1 314.922-0 6-0 D L 364.56 1/1 354.63

2-6 3-0 D L 280.17 1/1 271.49 2-6 4-0 D L 324.85 1/1 313.68 2-6 5-0 D L 373.18 1/1 360.77 2-6 6-0 D L 420.30 1/1 404.20 2-6 7-0 D L 462.64 1/1 442.67

2-8 3-0 D L 292.58 1/1 282.662-8 4-0 D L 338.50 1/1 327.332-8 5-0 D L 386.83 1/1 374.422-8 6-0 D L 442.67 1/1 425.302-8 7-0 D L 479.90 1/1 458.810

3-0 3-0 D L 314.92 1/1 304.993-0 4-0 D L 366.97 1/1 355.803-0 5-0 D L 421.58 1/1 407.923-0 6-0 D L 473.70 1/1 455.083-0 7-0 D L 519.61 1/1 497.28

4-0 4-0 D L 474.94 1/1 457.56






// /

/ / /

/

/ / / / /

/ / / / /

1/ // / / ,




WINDOWSKrestmark Series 4000 Vinyl Impact Window -





Features

** Notes special Impact features

• Colors: White , Pebblestone, and Clay_ IMPACT 4000

• * *Multi-chambered extruded vinyl frame and sash w ith strategically placed aluminum reinforcements in the hollows to meet or exceed coastal region structural requirements

provides stabil ity with excellen t strength , thermal resistant properties and is extremely low

maintenance. Vinyl extrusions have superior sou nd absorption and con tinuous color

throughout min im izing unsightly scratches.

• Fusion welded corners in frame and sash provides strength a n d v irtually el iminates a ir and

water inti ltration.

• Pocket s ill for reduced air infiltration with weep system.

• Integral pre-punched na il fin adds strength , is a weather t ight barrier a n d ease o f installation .

• Dual weather strip system reduces all weather and air in fi ltration to meet or exceed national

testing standards.

• Laminated Impact Resistance Glass w ith E nvironsealed W indows™ environmentally

friendly Warm Edge Spacer.

• * *Tilt-in removable reinforced bottom sash for ease of cleaning has dual positive sash

locks with keepers on all units redu cing air infiltration, surface mounted metal tilt

latches attached to lock rail reinforcement, two integral l ift rails adds strength and for

easy conven ient operation .

• * * Metal reinforced meeting a n d lock rail for increased structural integrity, and

reduces air infiltration.

• * *Heavy duty block & tackle balances provide smooth operation , locking shoes prevent

sash from fall ing out when t ilting for cleaning or removal.

• * *Combination un its are made with metal reinforced mull posts provides added

structural stability and strength for coastal requirements.

• Certificat ions o f all products tested are don e to meet or exceed national testing standards

by NFRC and AAMA for Impact-Resistant coastal codes. Energy Star® partner, F lorida

approvals .




WINDOWSKrestmark Series 4000 Vinyl Impact Window -


Meets Impact Residential Codes.


Size Divided Lite List Price

2-0 3-0 D L 522.06 1/1 514.762-0 3-0 OBS D L na 1/1 na2-0 4-0 D L 800.74 1/1 789.502-0 5-0 D L 972.18 1/1 959.332-0 6-0 D L 1,140.81 1/1 1,124.75

2-6 3-0 D L 776.87 1/1 767.23 2-6 4-0 D L 983.86 1/1 969.40 2-6 5-0 D L 1,187.35 1/1 1,172.89 2-6 6-0 D L 1,397.73 1/1 1,378.46 2-6 7-0 D L 1,767.11 1/1 1,739.81

2-8 3-0 D L 640.21 1/1 621.962-8 4-0 D L 1,038.46 1/1 1,020.802-8 5-0 D L 901.92 1/1 869.072-8 6-0 D L 1,036.97 1/1 1,011.422-8 7-0 D L 1,876.32 1/1 1,849.02

3-0 3-0 D L 692.08 1/1 681.133-0 4-0 D L 839.32 1/1 824.723-0 5-0 D L 986.78 1/1 968.533-0 6-0 D L 1,136.43 1/1 1,110.883-0 7-0 D L 2,074.77 1/1 2,045.86

4-0 4-0 D L 1,502.30 1/1 1,484.64






// /

/ / /

/

/ / / / /

/ / / / /

'i // / / ,




WINDOWSKrestmark Series Vinyl and Aluminum Specials


All Krestmark Windows are available in many configurations and combinations, as well as special sizes. Please request a quote on your needs.




C sto Specials s

c.u,, ; ~ inuous m Al'l!.h Tfiml EJ1e

CJOCSIH. eft/T1' I Conlin.JOU$

Cit.art SJ-I

hearal en-HE row

E endedOcia 0 Cctag!l:lf'I

F G.J./!I, st-I; c~ lnucus m An:h SHII

0 Bl..ilSE'feRJII , nd FEB 81-1 : F1111 I E.' brow Singkl letu-i

0 o ...

An::11 uarl

Race1ra,;; ~I

B I

I

I I




WINDOWS

Intentionally Blank







WINDOWSAMSCO Renaissance Series


With the Artisan Series, AMSCO has engineered style and design into a functional vinyl window. With deep beveled edges, sturdy frames and a variety of style, it’s the architectural, aesthetically pleasing details you crave, all in low-maintenance vinyl. Combine that with your pick of 6 traditional and contemporary, durable colors, and you’ll find your choices in a vinyl window are now anything but dull.

With the new Renaissance Series composite windows from AMSCO, you can now have the elegant beauty of wood without the upkeep. Read more about how this revolutionary product is changing the window industry and its environmentally friendly attributes here.The Renaissance Series windows come with a lifetime warranty, and a variety of styles and colors. You can also special order a wide variety of specialty shapes.

With the Studio Series, AMSCO combines energy effeciaWith the Studio Series, AMSCO combines energy efficiency, sturdy design and good looks into a budget-friendly vinyl window. With clean lines, large 3-inch frames, and energy-saving CōzE glass standard, these windows are ideal for homeowners who are looking for the perfect mix of performance and style. Choose from a number of options, styles and colors to create the perfect fit.

Meeting higher expectations for appearance, strength, energy efficiency and durability.




Beauty and Elegance without the Maintenance.

Artisan - explore the possibilities

Grids

REJYAISSAJYCE~ Senes

ARTISAN™ Series

Frame Size Large 3-¼" fra me w id th is ideal for new construclion and retro fit a ppl icalions

Custom Sizing Can be custom-ordered to the nearest 1/a inch to f~t any architectural design or custom w mdow

Add a distinct ive touch with 5/a • flat a nd l • sculptured g rid s sealed b;tween the _g lass for ea sy d ea ning o r l beveled simulated divided lite for a more tradi tio na l look

TheStudioSeries by AMSCO Windows8




WINDOWS

Intentionally Blank





Section 4 Page 1Effective: September, 2019

INTERIOR DOOR UNITS

Major / Minor

1001

1001

10011001100110011001100110011001

NOTE: To determine swing: When the the door opens toward you, and the knob is onthe left, it is a LEFT HAND. When the door opens toward you, and the knob is on the right, it is a RIGHT HAND






INTERIOR DOOR UNITSSPECIFICATIONS:

Interior Doors 6'8" 8'0"(Does not include 20-minute doors)

Width W Full width (eg. 2-0 = 24" net)Height H 80" 96"

A 6-3/4" 6-3/4"B 37-3/4" 32-3/4"C 68-3/4" 58-3/4"D n/a 84-3/4"

L 44" 60"top of door to center of bore

81" 97"

81-11/16" 97-11/19"83-1/2" 99-1/2"

with 3-1/4" csg 84-1/2" 100-1/2"Net Door Width Plus

1/4"1-5/8"

with 2-1/4" csg 5-1/4"with 3-1/4" csg 7-1/4"

Width Net Door Width Plus 2"Height Net Door Height Plus 2 1/2"

Suggested Rough Openings

One Piece flat jamb with applied stop, 2-1/4" WM 356 or 324 casing. One pair 3-1/2" 2D (brasstone) hinges, standard 2-1/8" lock bore, with 2-3/8" backset.

* 1/8" spacing between top of door and head jamb, and 7/8" from bottom of door to bottom of jamb.

6'8" 8'0"

Interior Bore and Hinging Details

Lock Bore

Hinge mortise

Top fo door to top of hinge.

Outside Frame Width.

Outside of casing Width.

WidthInside finished frame Width.

Interior UnitsHeight

Outside of casing height.

Outside frame height. (To top of jamb)

Inside finished frame height.*

PRIMEDF-J

CLEARFIR

Measurements shown are from top of door.

For hinge location on door frame -

ADD 1/8" from inside header.






INTERIOR DOOR UNITSSection 4 Door Index

6'8" 2044 4 Pnl Pine6'8" 2066 6 Pnl Pine6'8" N-66 6 Pnl Fir6'8" Flat Panel 3 Pnl SHAKER Primed Wood Stile & Rail w/ MDF Flat Panel6'8" Flat Panel 5 Pnl SHAKER Primed Wood Stile & Rail w/ MDF Flat Panel6'8" 2 Pnl Arch CAMDEN Textured Hollow Core Moulded HdBd6'8" 2 Pnl Arch PRINCETON Smooth Hollow Core Moulded HdBd6'8" 2 Pnl Roman Top CAIMAN Smooth Hollow Core Moulded HdBd6'8" 2 Pnl Plank SANTE FE Smooth Hollow Core Moulded HdBd6'8" 2 Pnl Square CARRARA Smooth Hollow Core Moulded HdBd6'8" 2 Pnl Square CARRARA Smooth Solid Core Moulded HdBd6'8" 1 Pnl Shaker MADISON Smooth Hollow Core Moulded HdBd6'8" 2 Pnl Shaker MONROE Smooth Hollow Core Moulded HdBd6'8" 4 Pnl COVENTRY Smooth Hollow Core Moulded HdBd

6'8" 5 Pnl ROCKPORT Smooth Hollow Core Moulded HdBd6'8" 6 Pnl COLONIST Textured Hollow Core Moulded HdBd6'8" 6 Pnl COLONIST Smooth Hollow Core Moulded HdBd6'8" 6 Pnl COLONIST Smooth Solid Core Moulded HdBd8'0" Flat Panel 3 Pnl SHAKER Primed Wood Stile & Rail w/ MDF Flat Panel8'0" Flat Panel 5 Pnl SHAKER Primed Wood Stile & Rail w/ MDF Flat Panel8'0" 1 Pnl Shaker MADISON Smooth Hollow Core Moulded HdBd8'0" 2 Pnl Shaker MONROE Smooth Hollow Core Moulded HdBd8'0" 2 Pnl Arch PRINCETON Smooth Hollow Core Moulded HdBd8'0" 2 Pnl RomanTop CAIMAN Smooth Hollow Core Moulded HdBd8'0" 2 Pnl RomanTop CARRARA Smooth Hollow Core Moulded HdBd8'0" 2 Pnl RomanTop CARRARA Smooth Hollow Core Moulded HdBd8'0" 4 Pnl COVENTRY Smooth Hollow Core Moulded HdBd8'0" 5 Horizontal Pnl ROCKPORT Smooth Hollow Core Moulded HdBd8'0" 6 Pnl COLONIST Smooth Hollow Core Moulded HdBd8'0" 6 Pnl COLONIST Smooth Solid Core Moulded HdBd8'0" 2 Pnl Plank SANTE FE Smooth Hollow Core Moulded HdBd

6'8" ND-730 Louver / Louver Pine6'8" & 8'0" 1 Lt Pine 1 Lite Interior French Pine

6'8" 1510 / 1515 10 / 15 Lite Interior French FIR6'8" 1510 / 1515 10 / 15 Lite Interior French PRIMED6'8" Pantry 1 Light etched glass with design PRIMED6'8" LAUAN Flush Hollow Core6'8" BIRCH Flush Hollow Core6'8" HARDBOARD Flush Hollow Core

6'8" & 7'0" Barn Door Knotty AlderInterior Options 20 Minute Rated Doors and Units Moulded panel door - cut-down specifications






INTERIOR DOORS & DOOR UNITS

List Price List PriceDoor Unit Jamb and Trim Adders

Single Unit ADD $12.00 $12.00Double Unit ADD 12.00 12.00Single Unit ADD 32.00 32.00Double Unit ADD 38.00 36.00Single Unit ADD 31.00 24.00Double Unit ADD 35.00 28.00Single Unit ADD n/a 48.00Double Unit ADD n/a 60.00

Hardware Options: Single Unit Double UnitFor Primed Hinges ADD: $2.00 $4.00For Primium Hinges ADD: 8.00 16.00Roller Catches ADD: 15.00 30.00

For more Options see pages 41 - 46 at the end of this sectionDOOR ONLY UNIT UNIT

DESCRIPTION LIST PRICE SIZE LIST PRICE LIST PRICE

Clear Fir Primed

6'8" 2044 FOUR PANEL Pine

$181 001-001 1-0 x 6-8 x 1-3/8" $307 $269

#REF! 1-3 x 6-8 x 1-3/8" #REF! #REF!189 1-4 x 6-8 x 1-3/8" 315 277207 1-6 x 6-8 x 1-3/8" 333 295204 1-8 x 6-8 x 1-3/8" 330 292238 2-0 x 6-8 x 1-3/8" 364 326250 2-4 x 6-8 x 1-3/8" 376 338272 2-6 x 6-8 x 1-3/8" 398 360258 2-8 x 6-8 x 1-3/8" 384 346291 3-0 x 6-8 x 1-3/8" 417 379

2-0 Double 1-0 $545 $490

2-6 Double 1-3 #REF! #REF!2-8 Double 1-4 561 5063-0 Double 1-6 598 543 3-4 Double 1-8 591 5364-0 Double 2-0 659 6044-8 Double 2-4 683 6285-0 Double 2-6 726 6715-4 Double 2-8 699 6446-0 Double 3-0 764 709

INTERIOR UNIT SPECIFICATIONS: standard 2-1/8" lock bore, 2-3/8" backset.

1-1/2 pair 3-1/2" 2D (brasstone) hinges, 2 pair on 8-0CLEAR

FIR

Single UnitsDoor Only

For one piece jambs up to 5-1/4"

PRIMEDOne Piece flat jamb with applied stop, 2-1/4" WM 356 casing ,

Double Units - No Bore, No Astragal

For rip down jambs under 4-5/8"

3-1/4" C-11 Casing

4" C-12 Casing

Double Units












Clear Fir Primed



FIR





3-1/4" C-11 Casing

4" C-12 Casing

6'8" 2066R SIX PANEL Pine

$181 001-001 1-0 x 6-8 x 1-3/8" $307 $269

197 1-3 x 6-8 x 1-3/8" 323 285189 1-4 x 6-8 x 1-3/8" 315 277207 1-6 x 6-8 x 1-3/8" 333 295204 1-8 x 6-8 x 1-3/8" 330 292238 2-0 x 6-8 x 1-3/8" 364 326250 2-4 x 6-8 x 1-3/8" 376 338272 2-6 x 6-8 x 1-3/8" 398 360258 2-8 x 6-8 x 1-3/8" 384 346291 3-0 x 6-8 x 1-3/8" 417 379

2-0 Double 1-0 $545 $490

2-6 Double 1-3 577 5222-8 Double 1-4 561 5063-0 Double 1-6 598 543 3-4 Double 1-8 591 5364-0 Double 2-0 659 6044-8 Double 2-4 683 6285-0 Double 2-6 726 6715-4 Double 2-8 699 6446-0 Double 3-0 764 709

Double Units













Clear Fir Primed



FIR





3-1/4" C-11 Casing

4" C-12 Casing

6'8" F-66 SIX PANEL FIR

$501 001-000 1-0 x 6-8 x 1-3/8" $627 $589


2-0 Double 1-0 $1,184 $1,129

2-6 Double 1-3 1,184 1,1292-8 Double 1-4 1,184 1,1293-0 Double 1-6 1,184 1,129 3-4 Double 1-8 1,184 1,1294-0 Double 2-0 1,200 1,1454-8 Double 2-4 1,239 1,1845-0 Double 2-6 1,239 1,1845-4 Double 2-8 1,239 1,1846-0 Double 3-0 1,239 1,184

Single Units

Double Units

Door Only












Clear Fir Primed



FIR





3-1/4" C-11 Casing

4" C-12 Casing

6'8" MDF 3 Panel SHAKER Primed / Flat Panel

$72 001-035 1-0 x 6-8 x 1-3/8" $198 $160$7272 1-3 x 6-8 x 1-3/8" 198 160147 001-016 1-4 x 6-8 x 1-3/8" 273 235158 1-6 x 6-8 x 1-3/8" 284 246168 1-8 x 6-8 x 1-3/8" 294 256198 2-0 x 6-8 x 1-3/8" 324 286222 2-4 x 6-8 x 1-3/8" 348 310256 2-6 x 6-8 x 1-3/8" 382 344247 2-8 x 6-8 x 1-3/8" 373 335272 3-0 x 6-8 x 1-3/8" 398 360

Shaker Style Flat Panel Doors Solid stile construction. 2-0 Double 1-0 $327 $272

2-6 Double 1-3 327 2722-8 Double 1-4 476 421

Panel edges are kerfed and squeezed 3-0 Double 1-6 498 443 3-4 Double 1-8 520 4654-0 Double 2-0 578 5234-8 Double 2-4 627 5725-0 Double 2-6 696 6415-4 Double 2-8 676 6216-0 Double 3-0 727 672

Door Only Single Units

Double Units












Clear Fir Primed



FIR





3-1/4" C-11 Casing

4" C-12 Casing


001-035 1-0 x 6-8 x 1-3/8" $126 $88$72

001-035 1-3 x 6-8 x 1-3/8" 126 88145 001-016 1-4 x 6-8 x 1-3/8" 271 233160 1-6 x 6-8 x 1-3/8" 286 248172 1-8 x 6-8 x 1-3/8" 298 260192 2-0 x 6-8 x 1-3/8" 318 280215 2-4 x 6-8 x 1-3/8" 341 303227 2-6 x 6-8 x 1-3/8" 353 315239 2-8 x 6-8 x 1-3/8" 365 327262 3-0 x 6-8 x 1-3/8" 388 350

Shaker Style Flat Panel Doors Solid stile construction. 2-0 Double 1-0 $183 $128

2-6 Double 1-3 183 1282-8 Double 1-4 474 419

Panel edges are kerfed and squeezed 3-0 Double 1-6 503 448 3-4 Double 1-8 527 4724-0 Double 2-0 568 5134-8 Double 2-4 613 5585-0 Double 2-6 637 5825-4 Double 2-8 660 6056-0 Double 3-0 708 653


Double Units












Clear Fir Primed



FIR





3-1/4" C-11 Casing

4" C-12 Casing

6'8" 2 Panel Eyebrow Textured / CAMDEN Hollow Core

$72 2PET 1-0 x 6-8 x 1-3/8" $198 $160$7272 1-3 x 6-8 x 1-3/8" 198 16072 1-4 x 6-8 x 1-3/8" 198 16072 1-6 x 6-8 x 1-3/8" 198 16077 1-8 x 6-8 x 1-3/8" 203 16577 2-0 x 6-8 x 1-3/8" 203 16581 2-4 x 6-8 x 1-3/8" 207 16984 2-6 x 6-8 x 1-3/8" 210 17290 2-8 x 6-8 x 1-3/8" 216 17893 3-0 x 6-8 x 1-3/8" 219 181

2-0 Double 1-0 $327 $272


Single Units

Double Units

Door Only












Clear Fir Primed



FIR





3-1/4" C-11 Casing

4" C-12 Casing

6'8" 2 Panel Eyebrow Smooth / PRINCETON Hollow Core

$72 2PE 1-0 x 6-8 x 1-3/8" $126 $160$7272 1-3 x 6-8 x 1-3/8" 198 16072 1-4 x 6-8 x 1-3/8" 198 16072 1-6 x 6-8 x 1-3/8" 198 16077 1-8 x 6-8 x 1-3/8" 203 16577 2-0 x 6-8 x 1-3/8" 203 16581 2-4 x 6-8 x 1-3/8" 207 16984 2-6 x 6-8 x 1-3/8" 210 17290 2-8 x 6-8 x 1-3/8" 216 17893 3-0 x 6-8 x 1-3/8" 219 181

2-0 Double 1-0 $327 $272


Double Units













Clear Fir Primed



FIR





3-1/4" C-11 Casing

4" C-12 Casing

6'8" 2 Panel Radius Top Smooth / CAIMAN - ROMAN - Hollow Core

$72 2PR 1-0 x 6-8 x 1-3/8" $198 $160$7272 1-3 x 6-8 x 1-3/8" 198 16072 1-4 x 6-8 x 1-3/8" 198 16072 1-6 x 6-8 x 1-3/8" 198 16077 1-8 x 6-8 x 1-3/8" 203 16577 2-0 x 6-8 x 1-3/8" 203 16581 2-4 x 6-8 x 1-3/8" 207 16984 2-6 x 6-8 x 1-3/8" 210 17290 2-8 x 6-8 x 1-3/8" 216 17893 3-0 x 6-8 x 1-3/8" 219 181

2-0 Double 1-0 $327 $272



Double Units












Clear Fir Primed



FIR





3-1/4" C-11 Casing

4" C-12 Casing

6'8" 2 Panel Radius Plank Smooth - / SANTA FE Hollow Core

$72 2PRV 1-0 x 6-8 x 1-3/8" $198 $160$7272 1-3 x 6-8 x 1-3/8" 198 16072 1-4 x 6-8 x 1-3/8" 198 16072 1-6 x 6-8 x 1-3/8" 198 16077 1-8 x 6-8 x 1-3/8" 203 16577 2-0 x 6-8 x 1-3/8" 203 16581 2-4 x 6-8 x 1-3/8" 207 16984 2-6 x 6-8 x 1-3/8" 210 17290 2-8 x 6-8 x 1-3/8" 216 17893 3-0 x 6-8 x 1-3/8" 219 181

2-0 Double 1-0 $327 $272



Double Units












Clear Fir Primed



FIR





3-1/4" C-11 Casing

4" C-12 Casing

6'8" 2 Panel Square Top Smooth - / CARRARA Hollow Core

$72 2P 1-0 x 6-8 x 1-3/8" $198 $160$7272 1-3 x 6-8 x 1-3/8" 198 16072 1-4 x 6-8 x 1-3/8" 198 16072 1-6 x 6-8 x 1-3/8" 198 16077 1-8 x 6-8 x 1-3/8" 203 16577 2-0 x 6-8 x 1-3/8" 203 16581 2-4 x 6-8 x 1-3/8" 207 16984 2-6 x 6-8 x 1-3/8" 210 17290 2-8 x 6-8 x 1-3/8" 216 17893 3-0 x 6-8 x 1-3/8" 219 181

2-0 Double 1-0 $327 $272


Door Only

Double Units

Single Units












Clear Fir Primed



FIR





3-1/4" C-11 Casing

4" C-12 Casing

6'8" 2 Panel Square Top Smooth - / CARRARA Solid Core

$72$727272164 2PS 1-6 x 6-8 x 1-3/8" 290 252164164 2-0 x 6-8 x 1-3/8" 290 252176 2-4 x 6-8 x 1-3/8" 302 264176 2-6 x 6-8 x 1-3/8" 302 264183 2-8 x 6-8 x 1-3/8" 309 271186 3-0 x 6-8 x 1-3/8" 312 274

3-0 Double 1-6 511 456

4-0 Double 2-0 511 4564-8 Double 2-4 535 4805-0 Double 2-6 535 4805-4 Double 2-8 549 4946-0 Double 3-0 555 500


Double Units












Clear Fir Primed



FIR





3-1/4" C-11 Casing

4" C-12 Casing

6'8" 1 Panel Shaker Smooth - / MADISON Hollow Core

$98 1PF 1-0 x 6-8 x 1-3/8" $224 $186$9898 1-3 x 6-8 x 1-3/8" 224 18698 1-4 x 6-8 x 1-3/8" 224 18698 1-6 x 6-8 x 1-3/8" 224 186103 1-8 x 6-8 x 1-3/8" 229 191103 2-0 x 6-8 x 1-3/8" 229 191108 2-4 x 6-8 x 1-3/8" 234 196110 2-6 x 6-8 x 1-3/8" 236 198116 2-8 x 6-8 x 1-3/8" 242 204120 3-0 x 6-8 x 1-3/8" 246 208

2-0 Double 1-0 $380 $325



Double Units












Clear Fir Primed



FIR





3-1/4" C-11 Casing

4" C-12 Casing


$98 2PF 1-0 x 6-8 x 1-3/8" $224 $186$9898 1-3 x 6-8 x 1-3/8" 224 18698 1-4 x 6-8 x 1-3/8" 224 18698 1-6 x 6-8 x 1-3/8" 224 186103 1-8 x 6-8 x 1-3/8" 229 191103 2-0 x 6-8 x 1-3/8" 229 191108 2-4 x 6-8 x 1-3/8" 234 196110 2-6 x 6-8 x 1-3/8" 236 198116 2-8 x 6-8 x 1-3/8" 242 204120 3-0 x 6-8 x 1-3/8" 246 208

2-0 Double 1-0 $380 $325



Double Units












Clear Fir Primed



FIR





3-1/4" C-11 Casing

4" C-12 Casing

6'8" 4 Panel Square Top Smooth- / COVENTRY Hollow Core

$72 4P 1-0 x 6-8 x 1-3/8" $198 $160


2-0 Double 1-0 $327 $272



Double Units












Clear Fir Primed



FIR





3-1/4" C-11 Casing

4" C-12 Casing

6'8" 5 Panel Smooth - / ROCKPORT Hollow Core

$72 5P

7272 1-4 x 6-8 x 1-3/8" 198 16072 1-6 x 6-8 x 1-3/8" 198 16077 1-8 x 6-8 x 1-3/8" 203 16577 2-0 x 6-8 x 1-3/8" 203 16581 2-4 x 6-8 x 1-3/8" 207 16984 2-6 x 6-8 x 1-3/8" 210 17290 2-8 x 6-8 x 1-3/8" 216 17893 3-0 x 6-8 x 1-3/8" 219 181

2-8 Double 1-4 327 2723-0 Double 1-6 327 272 3-4 Double 1-8 337 2824-0 Double 2-0 337 2824-8 Double 2-4 346 2915-0 Double 2-6 350 2955-4 Double 2-8 362 3076-0 Double 3-0 369 314

Single Units

Double Units

Door Only












Clear Fir Primed



FIR





3-1/4" C-11 Casing

4" C-12 Casing

6'8" 6 Panel Textured / COLONIST Hollow Core

$72 6PT 1-0 x 6-8 x 1-3/8" $198 $160


2-0 Double 1-0 $327 $272



Double Units












Clear Fir Primed



FIR





3-1/4" C-11 Casing

4" C-12 Casing

6'8" 6 Panel Smooth / COLONIST Hollow Core

$72 6P 1-0 x 6-8 x 1-3/8" $198 $160


2-0 Double 1-0 $327 $272


Double Units













Clear Fir Primed



FIR





3-1/4" C-11 Casing

4" C-12 Casing

6'8" 6 Panel Smooth / COLONIST Solid Core

164 6PS 1-6 x 6-8 x 1-3/8" 290 252164 1-8 x 6-8 x 1-3/8" 290 252164 2-0 x 6-8 x 1-3/8" 290 252176 2-4 x 6-8 x 1-3/8" 302 264176 2-6 x 6-8 x 1-3/8" 302 264183 2-8 x 6-8 x 1-3/8" 309 271186 3-0 x 6-8 x 1-3/8" 312 274

3-0 Double 1-6 511 456 3-4 Double 1-8 511 4564-0 Double 2-0 511 4564-8 Double 2-4 535 4805-0 Double 2-6 535 4805-4 Double 2-8 549 4946-0 Double 3-0 555 500

Single Units

Double Units

Door Only












Clear Fir Primed



FIR





3-1/4" C-11 Casing

4" C-12 Casing


#REF!#REF!#REF!

0 1-4 x 8-0 x 1-3/8"

222 001-016 1-6 x 8-0 x 1-3/8" 410 353241 1-8 x 8-0 x 1-3/8" 429 372266 2-0 x 8-0 x 1-3/8" 454 397296 2-4 x 8-0 x 1-3/8" 484 427321 2-6 x 8-0 x 1-3/8" 509 452330 2-8 x 8-0 x 1-3/8" 518 461359 3-0 x 8-0 x 1-3/8" 547 490

Shaker Style Flat Panel Doors Solid stile construction.

2-8 Double 1-4 250 163Panel edges are kerfed and squeezed 3-0 Double 1-6 695 608

3-4 Double 1-8 732 6454-0 Double 2-0 783 6964-8 Double 2-4 841 7545-0 Double 2-6 893 806

Primed, MDF panels. 5-4 Double 2-8 909 8226-0 Double 3-0 967 880


Double Units












Clear Fir Primed



FIR





3-1/4" C-11 Casing

4" C-12 Casing

8'0" MDF 5 ** Panel SHAKER Primed / Flat Panel

#REF!** note - 8'0" doors have 6 horizontal panels

#REF!#REF! 1-4 x 8-0 x 1-3/8" #REF! #REF!

236 001-016 1-6 x 8-0 x 1-3/8" 424 367244 1-8 x 8-0 x 1-3/8" 432 375288 2-0 x 8-0 x 1-3/8" 476 419320 2-4 x 8-0 x 1-3/8" 508 451353 2-6 x 8-0 x 1-3/8" 541 484370 2-8 x 8-0 x 1-3/8" 558 501402 3-0 x 8-0 x 1-3/8" 590 533

Shaker Style Flat Panel Doors Solid stile construction.

2-8 Double 1-4 #REF! #REF!Panel edges are kerfed and squeezed 3-0 Double 1-6 722 635

3-4 Double 1-8 737 6504-0 Double 2-0 825 7384-8 Double 2-4 890 8035-0 Double 2-6 957 8705-4 Double 2-8 990 9036-0 Double 3-0 1,055 968

Double Units













Clear Fir Primed



FIR





3-1/4" C-11 Casing

4" C-12 Casing


$187$187187187 1-4 x 8-0 x 1-3/8" 375 318187 1PF8 1-6 x 8-0 x 1-3/8" 375 318189 1-8 x 8-0 x 1-3/8" 377 320189 2-0 x 8-0 x 1-3/8" 377 320197 2-4 x 8-0 x 1-3/8" 385 328198 2-6 x 8-0 x 1-3/8" 386 329207 2-8 x 8-0 x 1-3/8" 395 338217 3-0 x 8-0 x 1-3/8" 405 348



Double Units












Clear Fir Primed



FIR





3-1/4" C-11 Casing

4" C-12 Casing


$187$187187187 1-4 x 8-0 x 1-3/8" 375 318187 2PF8 1-6 x 8-0 x 1-3/8" 375 318189 1-8 x 8-0 x 1-3/8" 377 320189 2-0 x 8-0 x 1-3/8" 377 320197 2-4 x 8-0 x 1-3/8" 385 328198 2-6 x 8-0 x 1-3/8" 386 329207 2-8 x 8-0 x 1-3/8" 395 338217 3-0 x 8-0 x 1-3/8" 405 348



Double Units












Clear Fir Primed



FIR





3-1/4" C-11 Casing

4" C-12 Casing

8'0" 2 Panel Radius Top Smooth / CAIMAN - ROMAN - Hollow Core

$147$147147147 2PR8 1-4 x 8-0 x 1-3/8" 335 278147 1-6 x 8-0 x 1-3/8" 335 278150 1-8 x 8-0 x 1-3/8" 338 281150 2-0 x 8-0 x 1-3/8" 338 281157 2-4 x 8-0 x 1-3/8" 345 288158 2-6 x 8-0 x 1-3/8" 346 289167 2-8 x 8-0 x 1-3/8" 355 298177 3-0 x 8-0 x 1-3/8" 365 308



Double Units












Clear Fir Primed



FIR





3-1/4" C-11 Casing

4" C-12 Casing

8'0" 2 Panel Eyebrow Top Smooth / PRINCETON Hollow Core

$147$147147 2PE8 1-3 x 8-0 x 1-3/8" 335 278147 1-4 x 8-0 x 1-3/8" 335 278147 1-6 x 8-0 x 1-3/8" 335 278150 1-8 x 8-0 x 1-3/8" 338 281150 2-0 x 8-0 x 1-3/8" 338 281157 2-4 x 8-0 x 1-3/8" 345 288158 2-6 x 8-0 x 1-3/8" 346 289167 2-8 x 8-0 x 1-3/8" 355 298177 3-0 x 8-0 x 1-3/8" 365 308


Double Units













Clear Fir Primed



FIR





3-1/4" C-11 Casing

4" C-12 Casing

8'0" 2 Panel Square Top Smooth - / CARRARA Hollow Core

$147$147147147147 2P8 1-6 x 8-0 x 1-3/8" 335 278150150 2-0 x 8-0 x 1-3/8" 338 281157 2-4 x 8-0 x 1-3/8" 345 288158 2-6 x 8-0 x 1-3/8" 346 289167 2-8 x 8-0 x 1-3/8" 355 298177 3-0 x 8-0 x 1-3/8" 365 308

3-0 Double 1-6 544 457



Double Units












Clear Fir Primed



FIR





3-1/4" C-11 Casing

4" C-12 Casing

8'0" 2 Panel Square Top Smooth - / CARRARA Solid Core

262 2PS8 1-6 x 8-0 x 1-3/8" 450 393

266 001-035 2-0 x 8-0 x 1-3/8" 454 397275 001-035 2-4 x 8-0 x 1-3/8" 463 406275 001-035 2-6 x 8-0 x 1-3/8" 463 406279 001-035 2-8 x 8-0 x 1-3/8" 467 410288 001-035 3-0 x 8-0 x 1-3/8" 476 419

3-0 Double 1-6 774 687



Double Units












Clear Fir Primed



FIR





3-1/4" C-11 Casing

4" C-12 Casing

8'0" 4 Panel Square Top Smooth- / COVENTRY Hollow Core

$147 1-0 x 8-0 x 1-3/8" $335 $278$147 1-2 x 8-0 x 1-3/8" $335 $278147 1-3 x 8-0 x 1-3/8" 335 278147 4P8 1-4 x 8-0 x 1-3/8" 335 278147 1-6 x 8-0 x 1-3/8" 335 278150 1-8 x 8-0 x 1-3/8" 338 281150 2-0 x 8-0 x 1-3/8" 338 281157 2-4 x 8-0 x 1-3/8" 345 288158 2-6 x 8-0 x 1-3/8" 346 289167 2-8 x 8-0 x 1-3/8" 355 298177 3-0 x 8-0 x 1-3/8" 365 308

2-0 Double 1-0 $544 $457 2-4 Double 1-2 $544 $4572-6 Double 1-3 544 4572-8 Double 1-4 544 4573-0 Double 1-6 544 457 3-4 Double 1-8 550 4634-0 Double 2-0 550 4634-8 Double 2-4 564 4775-0 Double 2-6 566 4795-4 Double 2-8 585 4986-0 Double 3-0 605 518

Double Units













Clear Fir Primed



FIR





3-1/4" C-11 Casing

4" C-12 Casing

8'0" 5 Panel Smooth - / ROCKPORT Hollow Core8'0" Rockport Door has six panels

$147$147147147 5P8 1-4 x 8-0 x 1-3/8" 335 278147 1-6 x 8-0 x 1-3/8" 335 278150 1-8 x 8-0 x 1-3/8" 338 281150 2-0 x 8-0 x 1-3/8" 338 281157 2-4 x 8-0 x 1-3/8" 345 288158 2-6 x 8-0 x 1-3/8" 346 289167 2-8 x 8-0 x 1-3/8" 355 298177 3-0 x 8-0 x 1-3/8" 365 308


Single Units

Double Units

Door Only












Clear Fir Primed



FIR





3-1/4" C-11 Casing

4" C-12 Casing

8'0" 6 Panel Smooth / COLONIST Hollow Core

$147$147147147 6P8 1-4 x 8-0 x 1-3/8" 335 278147 1-6 x 8-0 x 1-3/8" 335 278150 1-8 x 8-0 x 1-3/8" 338 281150 2-0 x 8-0 x 1-3/8" 338 281157 2-4 x 8-0 x 1-3/8" 345 288158 2-6 x 8-0 x 1-3/8" 346 289167 2-8 x 8-0 x 1-3/8" 355 298177 3-0 x 8-0 x 1-3/8" 365 308


Single Units

Double Units

Door Only












Clear Fir Primed



FIR





3-1/4" C-11 Casing

4" C-12 Casing

8'0" 6 Panel Smooth / COLONIST Solid Core

$262$262262262262 6PS8 1-6 x 8-0 x 1-3/8" 450 393266 1-8 x 8-0 x 1-3/8" 454 397266 2-0 x 8-0 x 1-3/8" 454 397275 2-4 x 8-0 x 1-3/8" 463 406275 2-6 x 8-0 x 1-3/8" 463 406279 2-8 x 8-0 x 1-3/8" 467 410288 3-0 x 8-0 x 1-3/8" 476 419

3-0 Double 1-6 774 687 3-4 Double 1-8 783 6964-0 Double 2-0 783 6964-8 Double 2-4 800 7135-0 Double 2-6 800 7135-4 Double 2-8 808 7216-0 Double 3-0 827 740

Double Units













Clear Fir Primed



FIR





3-1/4" C-11 Casing

4" C-12 Casing

8'0" 2 Panel Radius Plank Smooth - / SANTA FE Hollow Core

$147$147147147 2PRV8 1-4 x 8-0 x 1-3/8" 335 278147 1-6 x 8-0 x 1-3/8" 335 278150 1-8 x 8-0 x 1-3/8" 338 281150 2-0 x 8-0 x 1-3/8" 338 281157 2-4 x 8-0 x 1-3/8" 345 288158 2-6 x 8-0 x 1-3/8" 346 289167 2-8 x 8-0 x 1-3/8" 355 298177 3-0 x 8-0 x 1-3/8" 365 308


Single Units

Double Units

Door Only












Clear Fir Primed



FIR





3-1/4" C-11 Casing

4" C-12 Casing

PINE LOUVER / LOUVER

$231 001-001 1-0 x 6-8 x 1-3/8" $357 $319


2-0 Double 1-0 $644 $589


Note: Our standard will be "slats down" on hinge pin side of door,

unless otherwise specified.

Specify on which side of the door that the slats are down.


Double Units












Clear Fir Primed



FIR





3-1/4" C-11 Casing

4" C-12 Casing

PINE 1 Light Interior French Clear Glass

One Lite Pine 6-8246 001-001 2-0 x 6-8 x 1-3/8" 1 Lt 372 334290 2-6 x 6-8 x 1-3/8" 1 Lt 416 378287 2-8 x 6-8 x 1-3/8" 1 Lt 413 375319 3-0 x 6-8 x 1-3/8" 1 Lt 445 407

4-0 Double 2-0 676 6215-0 Double 2-6 763 7085-4 Double 2-8 757 7026-0 Double 3-0 820 765

One Lite Pine 8-0353 001-001 2-0 x 8-0 x 1-3/8" 1 Lt 541 484388 2-6 x 8-0 x 1-3/8" 1 Lt 576 519387 2-8 x 8-0 x 1-3/8" 1 Lt 575 518424 3-0 x 8-0 x 1-3/8" 1 Lt 612 555

4-0 Double 2-0 1 Lt 953 8665-0 Double 2-6 1 Lt 1,022 9355-4 Double 2-8 1 Lt 1,019 9326-0 Double 2-8 1 Lt 1,094 1,007

Single Units

Double Units

Double Units

Single Units

Door Only












Clear Fir Primed



FIR





3-1/4" C-11 Casing

4" C-12 Casing

10 / 15 Light Interior French Fir Clear Glass

403 001-000 1-6 x 6-8 x 1-3/8" 5 Lt 529 491

446 2-0 x 6-8 x 1-3/8" 10 Lt 572 534

452 2-6 x 6-8 x 1-3/8" 15 Lt 578 540466 2-8 x 6-8 x 1-3/8" 15 Lt 592 554466 3-0 x 6-8 x 1-3/8" 15 Lt 592 554

3-0 Double 1-6 989 934

4-0 Double 2-0 1,075 1,020

5-0 Double 2-6 1,088 1,0335-4 Double 2-8 1,114 1,0596-0 Double 3-0 1,114 1,059

Single Units

Double Units

Door Only












Clear Fir Primed



FIR





3-1/4" C-11 Casing

4" C-12 Casing

10 / 15 Light Interior French Primed Clear Glass

270 001-002 2-0 x 6-8 x 1-3/8" 10 Lt 396 358

315 2-6 x 6-8 x 1-3/8" 15 Lt 441 403333 2-8 x 6-8 x 1-3/8" 15 Lt 459 421333 3-0 x 6-8 x 1-3/8" 15 Lt 459 421

4-0 Double 2-0 724 669

5-0 Double 2-6 813 7585-4 Double 2-8 849 7946-0 Double 3-0 849 794

Single Units

Double Units

Door Only












Clear Fir Primed



FIR





3-1/4" C-11 Casing

4" C-12 Casing

Pantry Door - Primed - 1 Light etched glass with "Pantry" design.

383 001-002 2-0 x 6-8 x 1-3/8" 509 471

423 2-6 x 6-8 x 1-3/8" 549 511443 2-8 x 6-8 x 1-3/8" 569 531

4-0 Double 2-6 949 894

5-0 Double 2-8 1,028 973 5-4 Double 3-0 1,068 1,013

Specify "Pantry" design on:Hinge pin side if doors opens into kitchen, Opposite hinge pin if door opens in to pantry.


Double Units












Clear Fir Primed



FIR





3-1/4" C-11 Casing

4" C-12 Casing

This page blank for future use












Clear Fir Primed



FIR





3-1/4" C-11 Casing

4" C-12 Casing

Flush LAUAN -Hollow Core

$57.79 LAU 1-0 x 6-8 x 1-3/8" $184 $14657.79 1-3 x 6-8 x 1-3/8" 184 14657.79 1-4 x 6-8 x 1-3/8" 184 14657.79 1-6 x 6-8 x 1-3/8" 184 14664.34 1-8 x 6-8 x 1-3/8" 190 15264.34 1-10 x 6-8 x 1-3/8" 190 15264.34 2-0 x 6-8 x 1-3/8" 190 15270.90 2-4 x 6-8 x 1-3/8" 197 15973.92 2-6 x 6-8 x 1-3/8" 200 16276.61 2-8 x 6-8 x 1-3/8" 203 16581.98 2-10 x 6-8 x 1-3/8" 82 8281.98 3-0 x 6-8 x 1-3/8" 208 170

2-0 Double 1-0 $299 $2442-6 Double 1-3 299 2442-8 Double 1-4 299 2443-0 Double 1-6 299 244 3-4 Double 1-8 312 257 3-8 Double 1-10 312 2574-0 Double 2-0 312 2574-8 Double 2-4 325 2705-0 Double 2-6 331 2765-4 Double 2-8 336 2816-0 Double 3-0 347 292


Double Units












Clear Fir Primed



FIR





3-1/4" C-11 Casing

4" C-12 Casing

Flush BIRCH -Hollow Core

$81.98 BIR 1-0 x 6-8 x 1-3/8" $208 $170

81.98 1-3 x 6-8 x 1-3/8" 208 17081.98 1-4 x 6-8 x 1-3/8" 208 17081.98 1-6 x 6-8 x 1-3/8" 208 17092.57 1-8 x 6-8 x 1-3/8" 219 18192.57 2-0 x 6-8 x 1-3/8" 219 181100.97 2-4 x 6-8 x 1-3/8" 227 189103.82 2-6 x 6-8 x 1-3/8" 230 192107.69 2-8 x 6-8 x 1-3/8" 234 196117.43 3-0 x 6-8 x 1-3/8" 243 205

2-0 Double 1-0 $347 $292


Double Units













Clear Fir Primed



FIR





3-1/4" C-11 Casing

4" C-12 Casing

Flush HARDBOARD -Hollow Core Primed

57.79 HBDP 1-0 x 6-8 x 1-3/8" 184 14657.79 1-3 x 6-8 x 1-3/8" 184 14657.79 1-4 x 6-8 x 1-3/8" 184 14657.79 1-6 x 6-8 x 1-3/8" 184 146

64.34 2-0 x 6-8 x 1-3/8" 190 15270.90 2-4 x 6-8 x 1-3/8" 197 15973.92 2-6 x 6-8 x 1-3/8" 200 16276.61 2-8 x 6-8 x 1-3/8" 203 16581.98 3-0 x 6-8 x 1-3/8" 208 170

2-0 Double 1-0 299 244 2-6 Double 1-0 299 2442-8 Double 1-4 299 2443-0 Double 1-6 299 244


Double Units







Interior Barn Doors

Knotty Alder - Rustic K Bar DesignSIZE Major / Minor DOOR ONLY

LIST PRICE

2-6 x 7-0 x 1-3/8" 001-007 $5632-8 x 7-0 x 1-3/8" 001-007 5973-0 x 7-0 x 1-3/8" 001-007 597

These doors have a 10" bottom rail that can be trimmed to adjust height.

Other sizes available by special order.

2-0 x 7-0 x 1-3/8" this size non-stock $5633-6 x 7-0 x 1-3/8" this size non-stock 665

Please see our selection of Barn Door Sliding Hardwarein Section 18, page 7.






OPTIONS FOR INTERIOR DOOR UNITS

Jamb Options for 6'8" highFor rip down jambs under 4-5/8" Single Unit ADD $12.00 $12.00

Double Unit ADD 12.00 12.00

For one piece jambs up to 5-1/4" Single Unit ADD $32.00 $32.00Double Unit ADD 38.00 36.00

For one piece jambs up to 6-5/8" Single Unit ADD $33.00 $46.00Double Unit ADD 37.00 52.00

For one piece jambs up to 8-7/8" Single Unit ADD na $52.00 Primed only Double Unit ADD 58.00

For adjustable (split) jambs Single Unit ADD $9.00 $6.00Double Unit ADD 10.00 8.00

Jamb Options for 8'0" highFor one piece jambs to 5-1/4"" Single Unit ADD na $28.00

Primed only Double Unit ADD na 32.00

For one piece jambs to 6-5/8" Single Unit ADD na $32.00Primed only Double Unit na 36.00

For one piece jambs to 8-7/8" Single Unit na $48.00Primed only Double Unit na 56.00

Casing Options 6'8" or 8'0"For 7/8" x 3-1/4" C-11 Casing Single Unit ADD $31.00 $24.00

ADD 35.00 28.00For 11/16"x3-1/2" 1X4 S4S Casing -Primed Single Unit ADD $36.00

(Specify mitered corners or butt joint) Double Unit ADD 44.00For 11/16"x5-1/4" 1X6 S4S Casing -Primed Single Unit ADD $70.00

(1X6 casing shipped loose) Double Unit ADD 84.00

For 1" x 3-1/2" RB-3 Casing (Primed) Single Unit ADD na $62.00 Primed only Double Unit ADD na 76.00

For 1-1/8" x 3-1/4" C-24 Casing (Primed) Single Unit ADD na $72.00 Primed only Double Unit ADD na 86.00

For 1-1/16" x 4 " C-12 Casing (Primed) Single Unit ADD na $48.00 Primed only Double Unit ADD na 60.00

For two sides of 11/16 x 3-1/4" FLUTED Casingwith 7/8 x 3-1/2 x 6 Pine plinth block and Single Unit ADD $94.00 $92.00 7/8" x 3-1/2 " Pine bullseye rosette - Double Unit ADD 110.00 108.00

For No Casing Single Unit DEDUCT $20.00 $16.00Double Unit DEDUCT 24.00 20.00

PrimedUnits

ClearUnits







HARDWARE

For Primed Hinges ADD 2.00 4.00

For Premium Hinges * ADD 8.00 16.00 * Premium Stock hinges include BB - Bright Brass SN - Satin Nickel AN - Antique Nickel DC - Satin Chrome AB - Antique Brass CB - Colonial Bronze

For Ball Bearing Hinges ADD 22.00 44.00some finishes may be special order

For Roller Catches ( w/ Bright Brass strike plate ) 15.00 30.00 Specify strike finishes: BB,DC,AN,CB,SN,AB

For DOOR-MAX Magnetic catch 15.00 30.00

MISCELLANEOUS

For Cut Down Height ADD $60.00 $110.00For Full Bound, Cut Down Unit ADD 68.00 118.00

Door Only: Bore and Mortise for Hingesper our standard specifications.** $30.00** see specifications on page 2 of this section.

Special set-up charge for special bore and hinging $120.00

For interior pine astragal no bolt ADD $65.00 (Note: Adds 5/8" to RO width, unless specified otherwise.)

For interior pine astragal with 6" mortised ADD $90.00 head bolt (stock, slide action bolt)

Units UnitsSingle Double







Attic Access Door Units

with Attic Access* Bumper SillFrame only - with Attic Access sill $209

Add door of choice

Can be used with 1-3/8" or 1-3/4" hollow core or solid core door.

Specify open into the room, or open into the attic.

For doors that open into the attic a standard bumper sill is provided.For Mill finished bumper sill to above price ADD $42For Bronze finished bumper sill to above price ADD $50

For other casing and hardware options see page 34 & 35 in this section.

LIST PRICE

*The Atttic Access Sill is designed for attic access doors that swing into the conditioned space. From the interior room side the sill is not showing under the door. With a

matching1-3/8" door, the finished unit looks like all the rest.

2-1/4" primed casing, 2 sides

4-5/8" Rabetted, paint grade, jamb, with weatherstrip

1-1/2 pair 3-1/2" 2D (brasstone) hinges

2-1/8" lock bore, 2-3/8" backset.






INTERIOR 20 MINUTE DOORS and UNITSUnit Specifications:

Options:

For Premium Hinges ADD: $8.00 $8.003-1/4" C-11 Casing ADD: 31.00 24.00No Sill & No WeatherStrip DEDUCT: 23.00 23.00

See Exterior Options in Section 4B for other jamb, sill, and trim choices.

Moulded Panel Designs See next page for Shaker Flat Panels

CAIMAN PRINCETON CAMDEN SANTE FE CARRARA COVENTRY ROCKPORT COLONISTSmooth Smooth Textured Smooth Smooth Smooth Smooth Smooth

2 Pnl 2 Pnl Arch 2 Pnl Arch 2 Pnl Arch 2 Pnl 4 Pnl 5 Pnl 6 PnlRoman Plank Square Horizontal

Arch (8' Rockportis 6 Pnl)

Stock Sizes2-8x6-8 3-0x6-8

2-8x8-0 3-0x8-0

Door Only* Door Only LIST SIZE Net Size

$262 001-035 2-8x 6-8 x 1-3/4" 31 3/4" x 79" $496 $445267 001-035 3-0x 6-8 x 1-3/4" 35 3/4" x 79" 501 450317 001-035 2-8x 8-0 x 1-3/4" 31 3/4" x 95" 592 537329 001-035 3-0x 8-0 x 1-3/4" 35 3/4" x 95" 604 549

PrimedFrame

20 minute WH labeled 1-1/4" rabetted frame, 2-1/4" WM 356 casing, 1-1/2 pair 4" hinges, standard 2-1/8" lock bore, with weatherstrip, and open in fixed sill.

Clear FirFrame

PrimedFrame

* Door only price includes machining for standard hinges and is labeled with WH metal label applied.

Clear FirFrame

Unit PriceSingle Units





Section 4 Page 49 Effective: November 2019

INTERIOR 20 MINUTE DOORS and UNITSUnit Specifications:

Options:

For Premium Hinges ADD: $8.00 $8.00

3-1/4" C-11 Casing ADD: 31.00 24.00

No Sill & No WeatherStrip DEDUCT: 23.00 23.00

See Exterior Options in Section 4B for other jamb, sill, and trim choices.

PrimedFrame

20 minute WH labeled 1-1/4" rabetted frame,2-1/4" WM 356 casing,1-1/2 pair 4" hinges,standard 2-1/8" lock bore,with weatherstrip, and open in fixed sill.

Clear FirFrame

Shaker Flat Panel See previous page for Moulded Panel Designs

MADISON MONROESmooth Smooth Primed Primed1 Pnl 2 Pnl 3 Pnl 5 Pnl

Flat Pnl Flat Pnl Flat Pnl Flat PnlStock Sizes Shaker Shaker Shaker Shaker

2-8x6-8 3-0x6-8 2-8x8-0 3-0x8-0

1 Panel 2 Panel 3 Panel 5 Panel**

Door Only* Door Only

LIST SIZE Net Size

Moulded Hardboard - 1 or 2 Panel

$398 001-035 2-8x 6-8 x 1-3/4" 31 3/4" x 79" $632 $581

403 001-035 3-0x 6-8 x 1-3/4" 35 3/4" x 79" 637 586

454 001-035 2-8x 8-0 x 1-3/4" 31 3/4" x 95" 729 674

465 001-035 3-0x 8-0 x 1-3/4" 35 3/4" x 95" 740 685

Wood Stile & Rail w/ MDF Panel - 3 or 5 Panel**

$611 001-035 2-8 or 3-0x 6-8 x 1-3/4" 3 Panel due 12/2019 $845 $794

648 001-035 2-8 or 3-0x 6-8 x 1-3/4" 5 Panel " 882 831

637 001-035 2-8 or 3-0x 8-0 x 1-3/4" 3 Panel " 912 857

673 001-035 2-8 or 3-0x 8-0 x 1-3/4" 5 Panel** " 948 893

** 8-0 5PNL has 6 panels.

Moulded Hardbaord Wood Stile & Railwith MDF Flat Panel

Moulded Hardboard Wood / MDF Panel

Single Units

* Door only price includes machining for standard hingesand is labeled with WH metal label applied.

PrimedFrame

Clear FirFrame20 Min. Unit Price

31 3/4" / 35 3/4" x 79"

31 3/4" / 35 3/4" x 95"






Short and Cut-Down door / door units

ABCD

6-8 high doors.

6 PNL Smoth or Textured

2PNL ARCH Smooth or Textured

2PNL ROMAN or PLANK

2PNL Square Smooth

4 PNL ARCH Textured

4 PNL Smooth or Textured

5 PNL Smooth

A 40-1/2" to 47-1/2" 47" to 51-3/4" 40-1/2" to 47-1/2" 40-1/2" to 47-1/2" 40-1/2" to 47-1/2" 40-1/2" to 47-1/2" 43" to 46-7/8"

B 28-1/4" to 39-1/2" 24" to 32-3/4" 28-1/4" to 39-1/2" 28-1/4" to 39-1/2" 28-1/4" to 39-1/2" 28-1/4" to 39-1/2" 30" to 36-7/8"

C 59-1/4" to 67-1/2" na na na na na 44" to 50-7/8"

D na na na na na na 58" to 64-7/8"

8-0 high doors

1001

1001

100110011001

10011001

6 PNL Smoth or Textured

2PNL ARCH Smooth

2PNL ROMAN or PLANK

4 PNL Smooth2PNL Square

Smooth

A 55-1/4" to 63-1/2" 61" to 67-1/2" 55-1/4" to 63-1/2" 55-1/4" to 63-1/2" 55-1/4" to 63-1/2"

B 28-1/4" to 39-1/2" 24" to 32-3/4" 28-1/4" to 39-1/2" 28-1/4" to 39-1/2" 28-1/4" to 39-1/2"C 72-1/4" to 80"

* Minimum height allows for a 2" rail face above and below

panels.

Use 8' door pricing when an 8' door is needed for short unit.

Due to the panel designs and sizes, moulded panel doors can only be sized in height to fit the various panel sizes and locations. A door cannot be cut and finished through a panel. All cuts are made at the rails with enough of the rail to form a border. Please use the guidelines below when ordering short doors.

Min. and Max. available from top of door through the lock rail*Min. and Max. available from bottom of door through the lock rail*Min. and Max. available from bottom of door through the intermediate rail*

Min. and Max. available from bottom of door through the intermediate rail*





Section 4 A Page 1Effective: October, 2019

INTERIOR FRAMESCASED OPENINGS

SPECIFICATIONS:

Product Code 21-51- 21-70-

Size LIST PRICE LIST PRICE2-0 x 6-8 $125.76 $100.802-8 x 6-8 125.76 100.803-0 x 6-8 125.76 100.804-0 x 6-8 145.79 115.845-0 x 6-8 145.79 115.846-0 x 6-8 145.79 115.848-0 x 6-8 175.81 140.74

3-0 x 8-0 164.37 128.076-0 x 8-0 185.03 143.588-0 x 8-0 199.49 152.76

INTERIOR TRANSOM FRAMES (OPEN)

SPECIFICATIONS

Up to 3-0 w x 2-0 h $91.74 $78.97Up to 6-0 w x 2-0 h 133.98 113.59

Options: for cased openings and interior transom frames Fir PrimedList Price List Price

Rip down jambs under 4-5/8" ADD: 12.00 12.00For Jambs To 5-1/4" on 6'8" (Fir & Primed) ADD: 38.00 36.00For Jambs To 6-9/16"" on 6'8" (Fir &Primed ADD: 37.00 52.00For jambs to 8-7/8" (Primed) ADD: na 56.00

3-1/4" C-11 Casing ADD: 35.00 28.001X4 S4S 11/16" x 3-1/2" Casing -Primed ADD: na 44.001X6 S4S 11/16" x 3-1/2" Casing -Primed (shipped loose) ADD: na 84.003-1/2" RB-3 Casing (Primed) ADD: na 76.003-1/4" C-24 Casing (Primed) ADD: na 86.004" C-12 Casing (Primed) ADD: na 60.00

PRIMEDCLEAR

FIR

One Piece 4-5/8" flat jamb. 2-1/4" WM 356 casing. With stops for sash or glass.Installed on interior door unit or cased opening. Add a sash from section 4-B if needed.

One Piece 4-5/8" flat jamb. 2-1/4" WM 356 casing. Set Up.






BIFOLD DOORS AND UNITS

Top track and bottom brackets installed in frame. Doors shipped in cartons. Options: List Price List PriceRip down jambs under 4-5/8" ADD: 12.00 12.00For Jambs To 5-1/4" on 6'8" ADD: 38.00 36.00For Jambs To 6-9/16"" on 6'8" ADD: 37.00 52.00For adjustable (split) jambs on 6'8" ADD: na naFor jambs to 8-7/8" on 8'0" ADD: na 56.003-1/4" C-11 Casing ADD: 35.00 28.001X4 S4S 11/16" x 3-1/2" Casing -Primed ADD: na 44.001X6 S4S 11/16" x 3-1/2" Casing -Primed (shipped l ADD: na 84.003-1/2" RB-3 Casing ADD: na 76.003-1/4" C-24 Csg (primed) ADD: na 86.004" C-12 Casing (primed) ADD: na 60.00

Complete UnitList Price Size List Price List Price

RAISED PANEL PINE 6'8" high 1-1/8"stiles may have 1 fingerjoint

$307 004-121 2-0 2DR $450 $425

351 004-121 2-6 2DR 495 470

400 004-121 2-8 2DR 543 518

400 004-121 3-0 2DR 543 518

558 004-121 4-0 4DR 727 697

646 004-121 5-0 4DR 815 785

741 004-121 6-0 4DR 910 880

LOUVER/LOUVER PINE 6'8" high 1-1/8"stiles may have 1 fingerjoint

$225 004-121 2-0 2DR $369 $344

247 004-121 2-6 2DR 390 365

267 004-121 2-8 2DR 410 385

267 004-121 3-0 2DR 410 385

395 004-121 * 4-0 4DR 564 534

437 004-121 * 5-0 4DR 607 577

476 004-121 * 6-0 4DR 645 615

Doors Only

CLEARFIR

PRIMED









Doors Only

CLEARFIR

PRIMED

COLONIST -Textured Six Panel 6'8" high 1-3/8"moulded panels both sides

$89 004-035 2-0 2DR $232 $207

98 004-035 2-6 2DR 241 216

108 004-035 2-8 2DR 252 227

108 004-035 3-0 2DR 252 227

178 004-035 4-0 4DR 347 317

193 004-035 5-0 4DR 362 332

209 004-035 6-0 4DR 379 349

COLONIST - Smooth Six Panel 6'8" higack / #1 1-3/8"moulded panels both sides

$89 004-035 2-0 2DR $232 $207

98 004-035 2-6 2DR 241 216

108 004-035 2-8 2DR 252 227

108 004-035 3-0 2DR 252 227

178 004-035 4-0 4DR 347 317

193 004-035 5-0 4DR 362 332

209 004-035 6-0 4DR 379 349

with #100









Doors Only

CLEARFIR

PRIMED

SANTE FE - Smooth Two Panel Plank 6'8" high 1-3/8"moulded panels both sides

$89 004-035 2-0 2DR $252 $227

98 004-035 2-6 2DR 252 227

108 004-035 2-8 2DR 252 227

108 004-035 3-0 2DR 252 227

178 004-035 lBearing han 4DR 347 317

193 004-035 a separate i 4DR 362 332

209 004-035 6-0 4DR 379 349

ROCKPORT - Smooth 5 Panel 6'8" high 1-3/8"moulded panels both sides

$89 004-035 2-0 2DR $232 $207

98 004-035 2-6 2DR 241 216

108 004-035 2-8 2DR 252 227

108 004-035 3-0 2DR 252 227

178 004-035 4-0 4DR 347 317

193 004-035 5-0 4DR 362 332

209 004-035 6-0with #100 track/#11 379 349









Doors Only

CLEARFIR

PRIMED

COVENTRY - Smooth Four Panel 6'8" high 1-3/8"Can be used with 2 or 4 Panel Square doors moulded panels both sides

$89 004-035 2-0 2DR $232 $207

98 004-035 2-6 2DR 241 216

108 004-035 2-8 2DR 252 227

108 004-035 3-0 2DR 252 227

178 004-035 4-0 4DR 347 317

193 004-035 5-0 4DR 362 332

209 004-035 6-0 4DR 379 349

CAIMAN -Smooth Two Panel Roman Top 6'8" 1-3/8"moulded panels both sides

$89 004-035 2-0 2DR $232 $207

98 004-035 2-6 2DR 241 216

108 004-035 2-8 2DR 252 227

108 004-035 3-0 2DR 252 227

178 004-035 4-0 4DR 347 317

193 004-035 5-0 4DR 362 332

209 004-035 6-0 4DR 379 349









Doors Only

CLEARFIR

PRIMED

CAMDEN - Textured Two Panel Arch 6'8" high 1-3/8"moulded panels both sides

$89 004-035 2-0 2DR $232 $207

98 004-035 2-6 2DR 241 216

108 004-035 2-8 2DR 252 227

108 004-035 3-0 2DR 252 227

178 004-035 4-0 4DR 347 317

193 004-035 5-0 4DR 362 332

209 004-035 6-0 4DR 379 349

PRINCETON -Smooth Two Panel Arch 6'8" high 1-3/8"moulded panels both sides

$89 004-035 2-0 2DR $232 $207

98 004-035 2-6 2DR 241 216

108 004-035 2-8 2DR 252 227

108 004-035 3-0 2DR 252 227

178 004-035 4-0 4DR 322 297

193 004-035 5-0 4DR 362 332

209 004-035 6-0 4DR 353 328









Doors Only

CLEARFIR

PRIMED

FLUSH LAUAN 6'8" high 1-3/8"

$119 004-007 2-0 2DR $263 $238

128 004-007 2-6 2DR 272 247

137 004-007 2-8 2DR 281 256

137 004-007 3-0 2DR 281 256

223 004-007 4-0 4DR 392 362

241 004-007 5-0 4DR 410 380

259 004-007 6-0 4DR 428 398

FLUSH BIRCH 6'8" high 1-3/8" Lauan Back

$140 004-005 2-0 2DR $284 $259

148 004-005 2-6 2DR 292 267

158 004-005 2-8 2DR 302 277

158 004-005 3-0 2DR 302 277

265 004-005 4-0 4DR 434 404

281 004-005 5-0 4DR 450 420

296 004-005 6-0 4DR 465 435






BYPASS DOOR UNITS

SPECIFICATIONS:

ADD two 1-3/8" doors to complete unit.

3-11 x 6-8 2- 2-0 doors 168.63$ $142.694-11 x 6-8 2- 2-6 doors 176.55 150.615-11 x 6-8 2- 3-0 doors 179.55 153.62

INTERIOR POCKET SPLIT CASED OPENINGSPECIFICATIONS

2-0 - 3-0 x 6-8 143.58$ $118.62

Options: List Price List PriceRip down jambs under 4-5/8" ADD: $12.00 $12.00For Jambs To 5-1/4" on 6'8" ADD: 38.00 36.00For Jambs To 6-9/16"" on 6'8" ADD: 37.00 52.00For jambs to 8-7/8" ADD: na 56.00

3-1/4" C-11 Casing ADD: 35.00 28.001X4 S4S 11/16" x 3-1/2" Casing -Primed ADD: na 44.001X6 S4S 11/16" x 3-1/2" Casing -Primed (shipped loose) ADD: na 84.003-1/2" RB-3 Casing ADD: na 76.003-1/4" C-24 Csg (primed) ADD: na 86.004" C-12 Casing (primed) ADD: na 60.00

One Piece 4-5/8" flat jamb. 2-1/4" WM 356 casing. Johnsto # 2222 by-pass header with track and hardware. Finished opening width = 2 x door width less 3/4".

For a complete unit ADD 1-3/8" Door, Johnson Pocket frame (on next page ), and this cased opening.

One Piece 4-5/8" flat jamb - with split head and side jamb. 2-1/4" WM 356 casing. Finished opening width = net door size.

PRIMEDCLEAR

FIR






HARDWARE - POCKET DOOR, BY-PASS, & BIFOLDJohnson Set Up Pocket Door Frame for 1-3/8" doors

2711 LIST PRICE

2711 Frame for 6'8" doors Rough Opening :with #111 track / #1020 hangers Width = 2 x door width, + 1-3/4"

for 1-3/8" doors to 80 lbs. Height = 84-1/2"

Size 2-0 x 6-8 131.58$ 061-015

2-4 x 6-8 137.15 061-015

2-6 x 6-8 140.40 061-015

2-8 x 6-8 145.97 061-015

3-0 x 6-8 149.37 061-015

2710 2710 Frame for 8'0" doors Rough Opening :

with #100 track/#1120 hangers* Width = 2 x door width, + 1-3/4"

for 1-3/8" doors to 125 lbs. Height = 100-1/2"

2-0 x 8-0 195.87$ 061-015

2-4 x 8-0 206.39 061-015

2-6 x 8-0 210.92 061-015

2-8 x 8-0 222.26 061-015

3-0 x 8-0 226.20 061-015

* Optional #1125 Ball Bearing hangers for doors to 200#'s are available as a separate item. See next page.

Johnson 1500 Universal Heavy Duty KD Frame - ctn pack1500 6-8" #100 track and 1120 hangers Width = 2 x door width, + 1"

for 1-3/8" doors to 125 lbs.* 6-8 Height = 84-1/2"

1530 8-0" #100 track and 1125 Ball Bearing 8-0 Height = 100-1/2" hangers for 1-3/8" doors to 200 lbs. List Price Product Code

1500 2-0 - 3-0 x 6-8 136.08$ 061-015

1530 2-0 - 3-0 x 8-0 188.12 061-015

* Optional #1125 Ball Bearing hangers for doors to 200#'s are available as a separate item. See next page.

carton packed

Rough Opening =






HARDWARE - POCKET DOOR, BY-PASS, & BIFOLD

Pocket Door Hardware Accessories

1060 Soft-Close/Open Hardware 88.05$

Miscellaneous Pocket Door Hardware Accessories

2511 PPK-1 20.25$ 061-015hangers, guides for 111 track

1500 PPK3 25.13 061-015 frames. 2 ea tri-roller hangers, guides for 100 track.

1125PPK 15.38 061-015 to 200#'s. Single tri-roller hanger for #100 track

1555 PPK3 10.28 061-015units. Track bracket with 2 door stops

150 -3PK1 7.69 061-015

1505 PPK 3 4.31 061-015

1575 PPK-3 8.59 061-015

Can be used with our stock 2710 8'0" setup frames or the 1500 6'8" and 8'0" KD frames that use the Series 100 track.

The 1060 Soft-Close Kit contains a single soft-close actuator only. For single direction soft door operation, the 1060 must be used in combination with a 1125 Door Hanger. For bi-directional soft door operation 2 1060's are required. Soft-Close kits can be used to convert current 100 Series installations to soft-close operation.

Kit for 2711 6'8" frame. 2 ea tri-roller

Pocket Guides & Bumper

Adaptor for 1-3/4" doors on #1500

Pocket door Edge Pull. For use with converging doors.

Kit for 2710 8'0", 1500, and 1530

Ball bearing Hanger pack for doors to

Converging Kit - for double pocket






Miscellaneous Bifold and Bypass Hardware

LIST PRICEJOHNSON SERIES 1700 Bifold HardwareComplete bifolding door hardware set for 1-1/8" to 1-3/8" doors

Shrink wrapped package1700 - 48" -2 or 4 door 51.91$ 061-0121700 - 60" -2 or 4 door 54.25 061-0121700 - 72" -2 or 4 door 57.37 061-012

JOHNSON SERIES 111FD Bifold HardwareHeavy duty bifold hardware sets. Shrink wrapped package

111 -72" -2 or 4 door 91.88$ 061-012111 -96" -2 or 4 door 106.20 061-012

BIFOLD HINGES1823PPK3 6.03$ 061-012

JOHNSON SERIES 2200 Bypass HardwareShrink wrapped package

2200 -48" -2 door $29.25 061-0122200 -60" -2 door 33.35 061-0122200 -72" -2 door 37.48 061-012

Bypass Hardware Pack 2200PK xtra set - Rollers, pulls, screws $8.97 061-012

Replacement Hardware for stock carton pack bifoldsStanley (Hdwe used on stock & set up bifolds)

BF 30-01-362 36" Track only $6.65 061-015

BF 30-01-48 48" Track only 8.60 061-015

BF 30-01-60 60" Track only 10.30 061-015

BF 30-01-72 72" Track only 11.80 061-015

BF 30-81- Jamb Bracket w/screws 1.45 061-0152454-1 2 door bag hardware no track 14.25 061-015






blank





Section 4B Page 1Effective: September 2019

EXTERIOR FRAMES






EXTERIOR FRAMESWood Door and Exterior Frame Specifications

Hinge locations

are from top of door to

top of hinge.

Deadbolt bore: 2-1/8" at 5-1/2" o/c above standard.

35-3/4"

Boring SpecificationsStandard bore: 2-1/8" lock bore at 2-3/8" backset.

All Doors supplied by Dyke Industries are made by the leading manufacturers with the highest quality materials. Doors must be finished on all six sides immediately on

delivery. Failure to do so can affect the performance of the door and may void manufacturer's warranty.

* Doors used in units are pre-fit 1/4" in width and 1" in height when installed in frames. Most Wood Doors are stocked prefit in width and height.

Door Size Actual net width (after pre-fitting) 2-0 23-3/4" 2-6 29-3/4" 2-8 31-3/4" 3-0






EXTERIOR FRAMES

Open out units with bumper sills are 5/8" shorter in frame and brick mould height than open in units. The brick outside mould width is 1/2" wider.

Door Size Actual Unit Height Actual Unit Height Rough Opening

8-0 97-11/16" 98-15/16" 98"

Width Outside Frame " (Outside Brickmould) Width

37-7/16 40" 38" 2-8 33-7/16 36" 3-0

Add 1/2" for Open Out

1-0 / 3-0 / 1-0 64-7/16 67"1-2 / 3-0 / 1-2 68-7/16 71" 69"

95-1/2"

Height (Outside Frame) (Outside Brickmould)

Nominal Door Actual Unit Width Actual Unit Width Rough Opening

Wood Door and Exterior Frame Specifications

65" 6-0 (pr 3-0)

34"

26" 2-6 31-7/16 34" 32"

73-7/8 76-1/2" 74-1/2"

4-0 (pr 2-0) 49-7/8 52-1/2" 50-1/2" 5-0 (pr 2-6) 61-7/8 64-1/2" 62-1/2"

25-7/16 " 28" 2-0

Height

6-8 81-11/16" 82-15/16" 82"

6-8 with 12" Transom 95-3/16" 96-7/16"

5-4 (pr 2-8) 65 7/8 68-1/2" 66-1/2"






EXTERIOR FRAMES

See Section 4C page 10 for FrameSaver information.

See Section 4C page 13 for PLASTPRO PF information.

An upgrade to the All Composite PlastPro PF frame is available on Most of our Exterior Frames

Why Buy a FrameSaver® Door Frame?

Wood Door and Exterior Frame Specifications

Door Units with Primed Frames listed in this price book are priced using the FrameSaver frame.






EXTERIOR FRAMES

Set-Up Exterior Frames with Weatherstrip and sillstock heights page(s)

Clear Fir Frames 6-8 & 8-0 6 & 7

FRAME SAVER Primed Frames 6-8 & 8-0 8 & 9

PlastPro PRIMED Composite PF Frames 6-8 & 8-0 10 & 11

PlastPro TEXTURED Composite PF Frames 6-8 & 8-0 12 & 13

Mahogany Frames 6-8 & 8-0 14 & 15

Primed Frames 6-8 16

Set-Up Exterior Frames No Weatherstrip , No Sill

No Kerf Clear Fir Frames 6-8 & 8-0 17

No Kerf Primed Frames 6-8 & 8-0 18

19 - 22

23

24 - 26

Fiberglass and Steel Doors are priced with Frames in Section 4C.

Exterior Options

Miscellaneous Trim Options

Transoms and Transom Frames

For a complete unit, use the frame prices from this section and add Wood Doors from Section 5, or other Special Order doors.






EXTERIOR FRAMES

OPTIONS: Single UnitsADD $10

Adjustable, screw type, mill sill ADD 24

Adjustable, screw type, Bronze sill ADD 34

Articulating ZAC mill sill ADD 24

Articulating ZAC Bronze sill ADD 36

Open out with bumper sill and NRP hinge ADD 25

Open out with bumper Bronze sill and NRP hinge ADD 36

Premiun hinges ADD 4

Fir Frames 6'8" highWith Sill & Weatherstrip List Price

4-9/16" Jambs 220$

5-1/4" " 270

6-9/16" " 307

7-1/4" " (6-8 only) 341

4-9/16" Jambs 517$

5-1/4" " 580

6-9/16" " 628

7-1/4" " (6-8 only) 671

4-9/16" Jambs 744$

5-1/4" " 878

6-9/16" " 963

7-1/4" " (6-8 only) 1,072

4-9/16" Jambs 927$

5-1/4" " 1,124

6-9/16" " 1,224

7-1/4" " (6-8 only) 1,352

4-9/16" Jambs 699$

5-1/4" " 825

6-9/16" " 888

7-1/4" " (6-8 only) 951 Add Door(s), Sidelites(s), and Transom Sash to complete unit.

5/4 x 4 Outside Casing in lieu of WM180 ADD1 x 4 Outside Casing in lieu of WM180 ADD5/4 x 4 Outside Casing with WM180 ADD1 x 4 Outside Casing with WM180 ADDFor no Casing DEDUCTFor Fir or Mahogany Veneered Ultimate Flip Lever Astragal ADD

Fir Frames are priced with Fir Astragal

Specifications: Wood Door Unit Frames -Rabbeted jambs with kerf for weatherstrip. Q-Lon compression weatherstrip applied. 1-1/4" x 2" WM 180 (All Purpose) Brick Mould. High-dam aluminum sill with vinyl threshold cap. 1-1/2 pair 2D (brasstone) 4 x 4 hinges.

Double Units with T-astragal with head and foot bolts*.

129

Sidelite Unit

$10included

Double Bore

4

Double Unit 4-0 - 6-0

Double Sidelite Unit up to 1-4 / 3-0 / 1-4

66 30

Single Unit 2-0 - 3-0

Double Sidelite Unit with Transom Frame up to 2'0" high

Double Unit with Transom Frame up to 2'0" high

3354

28

Solid Fir Trim Options 6'8" & 8'0" Dbls/Sdlt $48 $5422 2648 10822 80

Single

Dbl Units$104667

46

866 156

30

For other options see bottom of each page and "OPTIONS" page in this section. All prices are LIST.

67 included






EXTERIOR FRAMES











129

Sidelite Unit

$10included

Double Bore

4

66 30

Dbl Units$104667

46

866 156

30


67 included

Fir Frames 8'0" highWith Sill & Weatherstrip List Price

Up to 5-1/4" Jambs 314$

Up to 6-9/16" Jambs 381

Up to 5-1/4" Jambs 636$

Up to 6-9/16" Jambs 641

Up to 5-1/4" Jambs 978$

Up to 6-9/16" Jambs 1,168

Up to 5-1/4" Jambs 1,224$

Up to 6-9/16" Jambs 1,428

Up to 5-1/4" Jambs 882$

Up to 6-9/16" Jambs 902

Add Door(s), Sidelites(s), and Transom Sash to complete unit.

* Elliptical, Segment, and Half Round Transom Units are available by special order

5/4 x 4 Outside Casing in lieu of WM180 ADD1 x 4 Outside Casing in lieu of WM180 ADD5/4 x 4 Outside Casing with WM180 ADD1 x 4 Outside Casing with WM180 ADDFor no Casing DEDUCTFor Fir or Mahogany Veneered Ultimate Flip Lever Astragal ADD 56

Fir Frames are priced with Fir Astragal






22

Single

33

Dbls/Sdlt

26

8048

Solid Fir Trim Options 8'0"

28

$48

10822

$54






EXTERIOR FRAMES











129

Sidelite Unit

$10included

Double Bore

4

66 30

Dbl Units$104667

46

866 156

30


67 included

With Sill & Weatherstrip List Price

4-9/16" Jambs 182$

5-1/4" " 218

6-9/16" " 236

Up to 8-7/8" one piece 337

4-9/16" Jambs 388$

5-1/4" " 442

6-9/16" " 460


4-9/16" Jambs 647$

5-1/4" " 749

6-9/16" " 767


4-9/16" Jambs 795$

5-1/4" " 925

6-9/16" " 958

Up to 8-7/8" one piece 1,133

4-9/16" Jambs 537$

5-1/4" " 618

6-9/16" " 651

Up to 8-7/8" one piece 801 Add Door(s), Sidelites(s), and Transom Sash of choice for complete unit.

ForAll Composite Brick Mold ADD5/4 x 4 FrmSver Casing in lieu of Brick Mould ADD1 x 4 PVC Casing in lieu of Brick mould ADD5/4 x 4 Outside Casing with Brick Mould ADD1 x 4 PVC Casing with Brick Mould ADDFor no Casing DEDUCT

Frame Saver Frames are priced with White Aluminum Ultra Slide

Bolt Astragal

Dbls/Sdlt $20 $2458 7056 68



FRAME SAVER Primed with composite bottom 6'8" high



94 112

18 22


92 110

Single FRAMESAVER Trim Options 6'8" & 8'0"






EXTERIOR FRAMES











129

Sidelite Unit

$10included

Double Bore

4

66 30

Dbl Units$104667

46

866 156

30


67 included

With Sill & Weatherstrip List Price

4-9/16" Jambs 212$

Up to 5-1/4" Jambs 280

Up to 6-9/16" Jambs 299


4-9/16" Jambs 443$


Up to 6-9/16" Jambs 565


4-9/16" Jambs 732$


Up to 6-9/16" Jambs 965


4-9/16" Jambs 881$

Up to 5-1/4" Jambs 1,098

Up to 6-9/16" Jambs 1,157


4-9/16" Jambs 592$


Up to 6-9/16" Jambs 757

Up to 8-7/8" one piece 970 Add Door(s), Sidelites(s), and Transom Sash of choice for complete unit.

ForAll Composite Brick Mold ADD5/4 x 4 FrmSver Casing in lieu of Brick Mould ADD1 x 4 PVC Casing in lieu of Brick mould ADD5/4 x 4 Outside Casing with Brick Mould ADD1 x 4 PVC Casing with Brick Mould ADDFor no Casing DEDUCT

Frame Saver Frames are priced with White Aluminum Ultra Slide

Bolt Astragal


Single Dbls/Sdlt

58





FRAME SAVER Primed with composite bottom 8'0" high

$24

11294

$20

FRAMESAVER Trim Options 6'8" & 8'0"

7056 68

92 11018 22






EXTERIOR FRAMES











129

Sidelite Unit

$10included

Double Bore

4

66 30

Dbl Units$104667

46

866 156

30


67 included

PlastPro PF Frames All Composite 6'8" high Primed With Sill & Weatherstrip

4-9/16" Jambs 248$

5-1/4" 277

6-9/16" " 297

4-9/16" Jambs 473$

5-1/4" 511

6-9/16" " 535

4-9/16" Jambs 859$

5-1/4" 943

6-9/16" " 970

4-9/16" Jambs 1,121$

5-1/4" 1,272

6-9/16" " 1,298

4-9/16" Jambs 735$

5-1/4" 840

6-9/16" " 863

Add Door(s), Sidelites(s), and Transom Sash of choice for complete unit.

1 x 4 PVC Casing in lieu of PF Brick mould ADD

1 x 4 PVC Casing with Brick Mould ADDFor no Casing DEDUCT

PF Frames are priced with White Aluminum

Ultra Slide Bolt Astragal

List Price

41





Single Dbls/Sdlt


14 17

PF Frame Trim Options 6'8"

20 2434






EXTERIOR FRAMES











129

Sidelite Unit

$10included

Double Bore

4

66 30

Dbl Units$104667

46

866 156

30


67 included

PlastPro PF Frames All Composite 8'0" high Primed With Sill & Weatherstrip

4-9/16" Jambs 288$

5-1/4" 357

6-9/16" " 373

4-9/16" Jambs 522$

5-1/4" 624

6-9/16" " 652

4-9/16" Jambs 914$

5-1/4" 1,085

6-9/16" " 1,120

4-9/16" Jambs 1,176$

5-1/4" 1,413

6-9/16" " 1,448

4-9/16" Jambs 784$

5-1/4" 953

6-9/16" " 981

Add Door(s), Sidelites(s), and Transom Sash of choice for complete unit.

1 x 4 PVC Casing in lieu of Brick mould ADD

1 x 4 PVC Casing with Brick Mould ADDFor no Casing DEDUCT



34

14 17

20 2441

List Price

Single Dbls/Sdlt PF Frame Trim Options 8'0"











EXTERIOR FRAMES











129

Sidelite Unit

$10included

Double Bore

4

66 30

Dbl Units$104667

46

866 156

30


67 included

PlastPro TEXTURED PF Frames All Composite Oak Grain 6'8" high Textured With Sill & Weatherstrip

4-9/16" Jambs 285$

5-1/4" " 362

6-9/16" " 419

4-9/16" Jambs 621$

5-1/4" " 716

6-9/16" " 790

4-9/16" Jambs 964$

5-1/4" " 501

6-9/16" " 1,145

4-9/16" Jambs 1,272$

5-1/4" " 849

6-9/16" " 1,585

4-9/16" Jambs 929$

5-1/4" " 1,064

6-9/16" " 1,229

For no Casing DEDUCTFor Fir or Mahogany Veneered Ultimate Flip Lever Astragal ADD



20 24#REF!


TEXTURED PF Frame Trim Options 6'8" Single Dbls/Sdlt


Any ripping in width on composite frames will leave an edge that may not be suitable for finishing.


List PriceSingle Unit 2-0 - 3-0







EXTERIOR FRAMES











129

Sidelite Unit

$10included

Double Bore

4

66 30

Dbl Units$104667

46

866 156

30


67 included

PlastPro TEXTURED PF Frames All Composite Oak Grain 8'0" high Textured With Sill & Weatherstrip

4-9/16" Jambs 290$

5-1/4" " 372

6-9/16" " 429

4-9/16" Jambs 625$

5-1/4" " 759

6-9/16" " 833

4-9/16" Jambs 908$

5-1/4" " 1,106

6-9/16" " 1,224

4-9/16" Jambs 1,276$

5-1/4" " 1,464

6-9/16" " 1,723

4-9/16" Jambs 933$

5-1/4" " 1,117

6-9/16" " 1,272

For Fir or Mahogany Veneered Ultimate Flip Lever Astragal ADD



List PriceSingle Unit 2-0 - 3-0





TEXTURED PF Frame Trim Options 8'0" Single Dbls/Sdlt

#REF! #REF!

Any ripping in width on composite frames will leave an edge that may not be suitable for finishing.






EXTERIOR FRAMES











129

Sidelite Unit

$10included

Double Bore

4

66 30

Dbl Units$104667

46

866 156

30


67 included

White Mahogany Frames 6'8" highWith Sill & Weatherstrip Product Code

4-9/16" Jambs 430$

Up to 6-9/16" Jambs 556

4-9/16" Jambs 802$

Up to 6-9/16" Jambs 938

4-9/16" Jambs 1,241$

Up to 6-9/16" Jambs 1,521

4-9/16" Jambs 1,664$

Up to 6-9/16" Jambs 2,084

4-9/16" Jambs 1,225$

Up to 6-9/16" Jambs 1,501

Add Door(s), Sidelites(s), and Transom Sash of choice for complete unit.* Elliptical, Segment, and Half Round Transom Units are available by special order

For no Casing DEDUCTFor Fir or Mahogany Veneered Ultimate Flip Lever Astragal ADD 54

Mahogany units are priced with

Mahogany Astragal


50

Single Dbls/Sdlt

Double Sidelite Unit with Rectangular Transom Frame up to 2'0" high


White Mahogany Trim Options 6'8"

60



List Price






EXTERIOR FRAMES











129

Sidelite Unit

$10included

Double Bore

4

66 30

Dbl Units$104667

46

866 156

30


67 included

White Mahogany 8'0" highWith Sill & Weatherstrip

4-9/16" Jambs 523$

Up to 6-9/16" Jambs 653

4-9/16" Jambs 918$

Up to 6-9/16" Jambs 1,101

4-9/16" Jambs 1,575$

Up to 6-9/16" Jambs 1,921

4-9/16" Jambs 1,999$

Up to 6-9/16" Jambs 2,484

4-9/16" Jambs 1,342$

Up to 6-9/16" Jambs 1,664


For no Casing DEDUCTFor Fir or Mahogany Veneered Ultimate Flip Lever Astragal ADD 56

Mahogany units are priced with

Mahogany Astragal

Single






Mahogany Trim Options 6'8" & 8'0"

54

Dbls/Sdlt

64

List Price






EXTERIOR FRAMES











129

Sidelite Unit

$10included

Double Bore

4

66 30

Dbl Units$104667

46

866 156

30


67 included

With Sill & Weatherstrip

4-9/16" Jambs - only 149$

for wider jambs - use FrameSaver pricing

4-9/16" Jambs - only 351$


4-9/16" Jambs - only 552$


4-9/16" Jambs - only 700$


4-9/16" Jambs - only 499$



ForAll Composite Brick Mold ADD5/4 x 4 primed Casing in lieu of Brick Mould ADD1 x 4 primed Casing in lieu of Brick mould ADD5/4 x 4 primed Casing with Brick Mould ADD1 x 4 primed Casing with Brick Mould ADDFor no Casing DEDUCT

Primed units are priced with Fir

Astragal





PRIMED Paint Grade (not FrameSaver) 6'8" highList Price

Primed Fingerjoint Trim Options 6'8"

18

$25 $30

76

Single Dbls/Sdlt


6315

61 7348 5876 91






EXTERIOR FRAMES











129

Sidelite Unit

$10included

Double Bore

4

66 30

Dbl Units$104667

46

866 156

30


67 included

No Sill / No weatherstrip

4-9/16" Jambs 200$

Up to 6-9/16" Jambs 287

4-9/16" Jambs with wood Astragal, no H&F bolts 418$

Up to 6-9/16" Jambs " 528


4-9/16" Jambs 293$

5-1/4" Jambs 360

6-9/16" Jambs 392

4-9/16" Jambs with wood Astragal, 537$

5-1/4" Jambs " 542

6-9/16" Jambs 582

Add Door(s) to complete unit.

5/4 x 4 Outside Casing in lieu of WM180 ADD1 x 4 Outside Casing in lieu of WM180 ADD5/4 x 4 Outside Casing with WM180 ADD1 x 4 Outside Casing with WM180 ADD

For no Casing DEDUCT

Fir units are priced with Fir Astragal

No Kerf Fir Frames 6'8" high

No Kerf CLEAR FIR Frames 8'0" high

List Price

Fir units are priced with Fir Astragal

Single





$48 $54

Dbls/Sdlt

48 10822 80

22

0 54

Solid Fir Trim Options 6'8" & 8'0"

26

List Price






EXTERIOR FRAMES











129

Sidelite Unit

$10included

Double Bore

4

66 30

Dbl Units$104667

46

866 156

30


67 included


4-9/16" Jambs 1415-1/4" " 1786-9/16" " 196

For frames with weatherstrip and sill use primed FrameSaver

4-9/16" Jambs with wood Astragal, no H&F bolts 3195-1/4" " " 3726-9/16" " " 390


4-9/16" Jambs 1815-1/4" Jambs 2496-9/16" " 271

4-9/16" Jambs with wood Astragal, no H&F bolts 3735-1/4" Jambs " 4696-9/16" Jambs " 505

Add Door(s) to complete unit.

ForAll Composite Brick Mold ADD5/4 x 4 primed Casing in lieu of Brick Mould ADD1 x 4 primed Casing in lieu of Brick mould ADD5/4 x 4 primed Casing with Brick Mould ADD1 x 4 primed Casing with Brick Mould ADDFor no Casing DEDUCT


Astragal


Astragal

No Kerf PRIMED Paint Grade Frames 8'0" high No Sill / No weatherstrip


63 76


No Kerf PRIMED Paint Grade Frames 6'8" high

15 18

Single Dbls/Sdlt

$25 $3061 73

589176



Primed Fingerjoint Trim Options 6'8"

48






EXTERIOR FRAMES

SILL Options Single Double Sidelight

To LIST Price **

Screw Type Adjustable Sill, Mill ADD $13 $27 included

Screw Type Adjustable Sill, Bronze ADD $24 $46 30

ZAC Self Adjusting Sill, Mill ADD $24 $48 included

ZAC Self Adjusting Sill Bronze ADD 34 67 30

Open out Bumper Sill, Mill ADD 25 46 129

Open out Bumper Sill, Bronze ADD 36 66 156

For 1/2"ADA Sill, Mill (In or Out) ADD 6 14 51

For 1/2" ADA Sill, Bronze (In or Out) ADD 29 71 138

For no Sill DEDUCT 17 45 na

** for sidelight units up to 1-2/3-0/1-2. (for larger sidelights see MISCELLANEOUS OPTIONS)

Standard Fixed Sill

Screw Type adjustable sill

ZAC Articulating Sill

Open In ADA

Open Out Bumper Sill

Open Out ADA

Options continued on next page

OPTIONS






EXTERIOR FRAMES

OPTIONSHARDWARE and MISCELLANEOUS Single Double Sidelight

To LIST Price

Deadbolt Bore ADD $10 $10 $10

Viewer Bore ADD 24 24 24

Non-removable-pin Hinge, 2D Brasstone 6 10 6

Premium Hinges ( standard is brasstone) ADD 4 8 8 ( Bright Brass, Dull Chrome, Antique Nickel,Satin Nickel, Antique Brass, or Colonial Bronze )

4" x 4" Stainless Steel Hinges ADD 25 50

4" x 4" SPRING hinges (2 per door) ADD 32

( SN -Satin Nickel, CB -Bronze, DC -Dull Chrome)

Premium finish NRP hinges - Special Order - ADD 20 40 20

Ball Bearing Hinges in 15 or 11P ADD 33 66 33

Mortised Head & Foot Bolts ADD included

For no Mortised Head & Foot Bolts DEDUCT 30

Cut Down Door -in Height * Wood Doors ADD 80 160 120

Cut Down Door -in Width * Wood Doors ADD 80 160 120 * Doors cut down in height or width may void manufacturer's warranty. Some limitations may apply.

Door only - Bore and hinge mortise (Dyke standard specs) 46

Door only - Bore and apply standard hinges 58

Special bore and hinge placement - Set-up charge 110

For spread mull on sidelight units, up to 4" ADD per mull 45(standard mull is 1-1/2")

For Single Frames up to 4-0 wide (after options) ADD 80

Continuous Head and Sill on Triple or Quad units up to 12', that are greater

than 1/-2/3-0/1-2 units. After all sill and frame options are applied. ADD $192

Some limitations and restrictions apply.

Options for Exterior Frames continue on next page





Section 4B Page 21 Effective: November 2019

EXTERIOR FRAMES

OPTIONS Astragal Options- 1, 2, or 3 - for Fir or Mahogany Units

Slide Bolt Wood Veneer Ultimate Aluminum Astragal 6'8" 8'0"

For Flip Lever Astragal Bronze ADD -$142 -$142

For Ultimate Slide Bolt Astragal, Fir or Mahogany Veneer ADD $70 $70

Multipoint Astragal

For Multipoint Astragal Fir or Mahogany Veneer ADD $366 $366Flip Lever

Trilennium 3000 Multi-Point Lock - For Double UnitTo Fir or Mahogany Door Unit of Choice ADD: 6'8" 8'0"

Series 3000 - Stainless Steel installed with

Compatible Fir/Mahogany Veneer Astragal ADD $916 $1,016

Series 3000 - Victorian Bronze installed with

Compatible Fir/Mahogany Veneer Astragal ADD $903 $1,004

includes construction handle

Trilennium 3000 Multi-Point Lock - For Single Unit

To Fir or Mahogany Door Unit of Choice ADD:

Series 3000 - Stainless Steel ADD $622 $704

Series 3000 - Victorian Bronze ADD 609 692

Options for Exterior Frames continue on next page

The interior and exterior trim, as well as matching strike plates, are sold seperately, and ships in a separate carton to

be installed, by others, at the end of construction.

3-Point AstragalWood Veneer on Bronze

Aluminum

See Section 13 for these options,





Section 4B Page 22 Effective: September 2019

EXTERIOR FRAMES

OPTIONS

4-9/16" x 40" w/ 2 end caps $55.94

4-9/16" x 80" w/ 2 end caps 106.81

6-9/16" x 40" w/ 2 end caps 77.87

6-9/16" x 80" w/ 2 end caps 147.50

Tite Seal Self-Adhesive Foam Threshold Sealer per roll / pack

TSFM42F 5.5" x 3.5' Flat 12/ctn $13.85 ea piece

TSFM65 5.5" x 6.5' Roll 12/ctn 20.65 ea roll

See other SureSeal Flashing products in section 10.

SureSill - For added protection against water infiltration






EXTERIOR FRAMESMISCELLANEOUS EXTERIOR FRAME TRIM

CORNER BLOCKS & PLINTH BLOCKS

LIST

1" x 4" Fluted / Beaded Ext 1 - Primed3-0 x 6-8 per side not applied $746-0 x 6-8 per side " 906-0 x 8-0 per side " 117

Pine Corner and Plinths Blocks1-1/8" x 4-1/4" x 4-1/4" Bullseye Corner Block ea. $131-1/8" x 4-1/4" x 7-1/2" Plinth Block ea. 18

1" x 5-1/2" Fluted Ext 2 - Primed3-0 x 6-8 per side $1156-0 x 6-8 per side 1406-0 x 8-0 per side 175

Pine Corner and Plinths Blocks1-1/8" x 5-1/2" x 5-1/2" Bullseye Corner Block ea. $161-1/8" x 5-1/2" x 8" Plinth Block ea. 21






EXTERIOR FRAMES

1-3/8" Insulated 1-Light Transoms 082-011

SIZE LIGHT

2-0 x 1-0 24 x 12 1

2-4 x 1-0 28 x 12 1

2-6 x 1-0 30 x 12 1

2-8 x 1-0 32 x 12 1

3-0 x 1-0 36 x 12 1

4-0 x 1-0 48 3/4 x 12 1

5-0 x 1-0 60 3/4 x 12 1

5-3 x 1-0 62 7/8 x 12 1

5-4 x 1-0 64 3/4 x 12 1

5-7 x 1-0 66 7/8 x 12 1

6-0 x 1-0 72 3/4 x 12 1

Add 7/8" SDL bars to sash above. ADD per Light : $20Common sizes listed below.

Light

2-0 x 1-0 24x12 2

2-8 x 1-0 32x12 2

2-8 x 1-0 32x12 3

3-0 x 1-0 36x12 2

3-0 x 1-0 36x12 3

5-0 x 1-0 60x12 4

5-0 x 1-0 60x12 2

6-0 x 1-0 72x12 6 488 637

413 557373 521

333

Sash Only

239Price

274274

309

396477

267

210

362

333368

481517524375

279

Price

Sash Only Complete Unit

Rectangular Transom Sash and UnitsSpecifications: Wood Transom Units -PRIMED Rabbeted jambs. 1-1/4" x 2" WM 180 All Purpose Brick Mould. 1-1/2" Transom

mull. Sash installed. Unit installed on door unit.

Rough Opening height for Door Unit with Transom:

ADD: Transom frame height (13-1/2") to

door unit rough opening.

One light or Divided light with SDL bars

TRANSOM SASH AND TRANSOM SASH UNITS

302

Price

175175

Complete Unit

140

203

SIZE

333 481

1-3/8" Insulated - with SDL - Divided Light Transoms with 7/8" SDL bar applied

180

Price

250 349

243

270 369

342263






EXTERIOR FRAMES

up to:

2-8x2-0 $119 $99 $162 $206 $2623-0x2-0 119 99 162 206 2624-0x2-0 158 129 220 270 3605-0x2-0 178 144 246 297 4085-4x2-0 181 148 260 308 421

OPTIONS: 6-0x2-0 182 149 262 308 424 For Jambs up to 6-9/16" ADD $78 $43 $67 $131 $139

For other options see page 19 in this section. All Prices are LIST.

Add Glass price to Open Transom Frames above

per Square Foot -LIST

3/16" Single Glass per Sqr. Foot $21Clear Isul Glass per Sqr. Foot 36Low E Insul Glass per Sqr. Foot 46

Example: Clear insulated glass for a 3'6" x 1'8" transom frame :

42 20 840 sq in

144 5.8 sq ftRounded up to 6 sq ft $36 $216

SDL (simulated divided lights) are available for transoms

Add Sash price to Open Transom Frames above

Wood transom sash with: per Square Foot -LIST

1/8" Single Glass $61 $75Clear Isulated Glass 68 78Low E Insul Glass 92 105

Example: Glazed Transom Sash with insulated glass for a 3'0" x 1'2" transom frame :

36 14 504 sq in

144 3.5 sq ftRounded up to 4 sq ft $68 $272

Rectangular Transom Frames - open

Primed / FRM SVR

PF TEXTURED Composite

Specifications: Wood Transom Unit Frames -Rabbeted jambs. 1-1/4" x 2" WM 180 All Purpose Brick Mould. 1-1/2" Transom mull. Stops furnished for transom sash.

Fir, Stain Grade Sash


Open Frames

Add to open transom frame

above

To price glazed transom sash: width x height (inches), and divide by 144 = Square

feet of sash needed. Round that up to next whole number. Multiply

by Transom Sash square foot price.

Paint Grade Sash

Clear FirPF

PRIMED Composite

To price glass: take width x height (inches), and divide by 144 = Square feet of glass needed.

Round that up to next whole number. Multiply by glass square foot price.

Special Size Glazed Transom Sash - for Open Transom Frames

Direct Set Glass - for Open Transom Frames

Add to open transom frame

Mahogany





Section 4B Page 26 Effective: September 2019

EXTERIOR FRAMES

5' 4" Direct Glazed - 4 Lt -Spoke - For 1-0/3-0/1-0 Unit 1,710$ 082-040

O/S jamb to O/S jamb = 64-1/2" x 25-1/2"

4 9/16 " FJ Jambs - Primed WM180 Casing-

Set 3-1/4" inside casing 502$

082-040

5' 0" Direct Glazed - 4 Light - For 5-0 (dbl 2-6) Uint $1,690O/S jamb to O/S jamb = 62" x 16-1/2"

4 9/16 " Paint Grade or Clear Fir WM180 Casing- Primed Sill Nosing

Set 3-1/4" inside casing 502$

Paint Grade

SEGMENT, ELLIPTICAL, & HALF CIRCLE TRANSOMS

SEGMENT TRANSOM UNIT

A variety of transom designs and sizes are available by Special Order. Please send in your design and details for a quote.

SPECIAL ORDER TRANSOMS

Paint GradeStain Grade

Fir

$2,430

$691





Section 4C page 1 Effective:Sept 16, 2019

STEEL and FIBERGLASS DOOR UNITS

SECTION 4 C


Door and Frame SpecificationsPages

2 - 9 Door Specifications & Finishing Instructions

10 - 12 FRAME SAVER information

13 - 14 PF - PlastPro Composite FRAME information

15 - 16 Unit / Frame Specifications and Rough Openings

18 - 45 STEEL & FIBERGLASS Door Unit Pricing

46 Standard SideLights

47 - 48 Unit Options - Jambs, Casing, & Sills

49 Hardware & Miscellaneous options

50 Trilennium Multi-Point Lock options

51 20 Minute Door options

53 SDL - Simulated Divided Light

54 SureSill sill pans & Tite Seal threshold sealers

55 Trimmable FiberGlass Doors

56 - 58 Transom Options

59 Fiberglass Patio Doors

60 PreFinished FiberGlass Doors

61 Decorative Glass Units







Steel DoorsHigh Definition Steel Entry Doors

Varying designs are available in smooth surfaces

Striking, high-definition panel design

Closed-cell polystyrene core maintains U-factor and will not hold moisture (2)

12" lock-block provides hardware reinforcement (4)

Galvanized, 24 gauge primed steel skin (1)

LVL stiles and top rail with proud edge (3)

10 year limited warranty

* 24 gaugegalvanized steel

facings, LVL stiles and top rail with

proud edge, and rot resistant composite

bottom rail.







Manufacturer's Warranty - Steel Doors LVL Wood-Edge Steel Door WarrantySteel Doors 10 YearsSteves & Sons, at its sole discretion, will repair, replace warranted door or refund the original purchase price. STEVES &

SONS, INC. MAXIMUM LIABILITY IS LIMITED TO THE AMOUNT OF THE ORIGINAL PURCHASE PRICEAND

WILL NOT COVER THE COSTS OF LABOR, INSTALLATION OR FINISHING FOR ANY REPLACEMENTDOOR.

The manufacturer will not be liable for any door(s) repaired or replaced without prior written consent.

THIS WARRANTY IS IN LIEU OF ANY OTHER WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING

IMPLIED WARRANTIES OF FITNESS FOR A PARTICULAR PURPOSE AND MERCHANTABILITY. MOREOVER,

IN NO EVENT WILL STEVES AND SONS, INC. BE LIABLE FOR SPECIAL, INCIDENTAL OR CONSEQUENTIAL

DAMAGES. This warranty protects your legal rights. Other rights vary from state and may apply to you. Some states

and federal laws do not allow the exclusion of implied warranties. In the event these laws apply, the length of any implied

warranty shall be one (1) year or the shortest time in excess of one year permitted under applicable law. Similarly, some

states do not allow exclusions or limitation of consequential damages and, if applicable, this limitation will not apply.

Action on any claims for warping or for photographing may be deferred, at the option of the manufacturer for a period

not to exceed 12 months from date of claim. Please see care and handling instructions for additional information.

This warranty does not cover the following circumstances and are not considered the responsibility of Steves & Sons.

Locksets or components not provided by Steves & Sons.

Normal wear and tear, and natural weathering of surfaces.

Vandalism, misuse, neglect, impact by foreign objects, acts of god, fire, explosion or other casualty

Problems resulting from misuse and or abuse and failure to follow care and maintenance instructions

Problems related to improper finishing of all surfaces, front, back, sides, top and bottom of door, door unit, sidelites and/or

transom.

Natural variations in color or texture in any finish shall not be considered a defect.

Failure to provide a proper overhang; Damage caused by direct rain exposure, damage caused by extreme

temperature, either from direct sunlight and or installation of a storm door. In most climate conditions you need

to have an overhang that extends at least half the distance of the height of

your entryway. (For example if the measurement from the base of the door to bottom of the

overhand is 10 feet, the overhang should extend 5 feet)

For Southern and Western warm climates, wet climates or if your door will receive direct sunlight during the

hottest part of the day you should have an overhang that extends the full height and up to twice the distance of

distance of the height of your entryway.

Installing a storm door can cause extreme heat buildup from the sun or trap moisture depending on your

environment. Upon inspection, if the installation of storm door caused damage to the door that may void the

warranty.






STEEL and FIBERGLASS DOOR UNITSFiberGlass

FIBERGLASS DOORS

Our fiberglass entry doors with exclusive Hydroshield Technology™ feature fiberglass reinforced door skins, full-length composite stiles, and composite top & bottom rails to prevent water infiltration on all six sides.

FULL LENGTH COMPOSITE TOP AND BOTTOM RAILS Additional non-porous protection keeps water from seeping into the door and helps prevent the build up of mold or mildew.

FIBERGLASS REINFORCED SKIN Fiberglass is unmarred by the wear and tear of everyday use and is unaffected by moisture and humidity. Our doors will not rot, splinter or warp like wood, and won’t dent or delaminate like steel.

FULL LENGTH COMPOSITE STILES All Plastpro fiberglass entry doors feature full length composite stiles to prevent water infiltration into the door and ensures our door will never warp, rot, or rust.

X1A0H













How To Paint Smooth Skin Doors Materials Needed

1. Lint-free cloth2. Acetone3. Rubber gloves4. Masking tape5. 4" bristle brush6. Scotch Brite Pad (Fine) or 320-400 grit sandpaper7. For Water-based application: Acrylic primer/acrylic latex-based exterior grade paint. We

recommend using "Sherwin-Williams PrepRite® Bonding Primer" with compatible acrylic-latex paint for optimal paint adhesion.

Step 1: Surface Preparation

1. Lay door horizontally on saw horses or a table.2. Remove all the hardware and mask off anything you don't want painted, such as the glass

insert.3. Lightly scuff sand the surface with a Scotch Brite pad or fine sandpaper.4. Wipe the door with acetone to clean any dust or residue from the surface. Allow acetone to

dry from the surface before applying5. Do not use hydro-carbon based solvents to clean the surface as such products may leave a

residue.6. Apply primer with a 4" brush beginning with the panels. Follow the manufacturer's

instructions for drying time before applying topcoat. Continue to apply theprimeto ALL 6sides. Doors which have been bored and morticed for hardware should be primed inside ofthe lock bore as well.

7. The primer must be completely dry before applying the topcoat.







Step 2: Painting

1. Apply exterior grade paint with 4" brush beginning with the panels.2. It is common practice to paint both stiles the same color as the exterior side of the door. If

applying a second coat, follow the manufacturer's instructions for drying time between coats.3. Continue to apply the top coat to ALL 6 sides. door which have been bored and morticed for

hardware should be finished inside of the lock bore as well.

Caution

1. When using stains, mineral spirits, paints, or other hazardous materials, always read and followthe manufacturer's instructions. Plastpro, Inc. makes no representations as to the proper use ofother manufacturers' products.

2. When working with paints or solvents, make sure the working area is well ventilated.3. Keep away from heat and flame as materials may be combustible.4. Paints or solvents may cause skin and eye irritation. Avoid contact with skin and eyes.5. Keep out of reach of children.

Normal Maintenance Even a well-finished fiberglass door will be affected by exposure and weathering from sun, moisture, and air pollutants. It is considered normal maintenance to re-apply the topcoat approximately every two years.






STEEL and FIBERGLASS DOOR UNITSManufacturer's Warranty - PlastPro Fiberglass Doors - SMOOTH SKIN

PLASTPRO 25 YEARS LIMITED WARRANTY ON SMOOTH SKIN FIBERGLASS DOORS Residential Warranty Holder workmanship that might unreasonably affect its performance. The termsof this 25 Years Limited Warranty initiates from the first Smooth Skin Fiberglass Doors, as sold directly by Plastpro 2000, Inc. are guaranteed to be free of defects in material and date of purchase from an authorized retailer and continues for the stated duration as long as the original warranty holder owns and resides in the premises of which the product was installed. This warranty is for the original owner/user and is non-transferable. The terms of this Limited Warranty exclude failures which are the result of or involve: 1. Accident, negligence, abuse or improper installation (p[ease seemanufacture installation guide) improper finishing orimproper assembly of hardware, such as the lack of applying the sealantproperly for the lockset, causing leakage or failure to reinforced material2. Installed in abnormal or extreme locations or situations.3. Improper pre-installation storage (please see manufacture installationinstructions).4. Damage caused by localized application of heat, movement of building orbuilding components, or expansion/contraction of building or buildingcomponents.5. Damage caused by high winds, floods, fire and conditions that exceedPlastpro product design and testing specifications.6. Damage caused by freight carriers, common carriers, privatetransportation, or any other means of transportation or handling occurringafter shipping from Plastpro 2000, Inc.7. Exposure of the door to extreme elements, storage, installation,maintenance or service.8. Fire, corrosive fumes, stains, contact with chemically abrasive substances,acts of God, and/or any events or actions not controlled by Plastpro 2000, Inc,or what is considered normal wear and tear.9. All components, parts, glass, and labor supplied by parties other thanPlastpro 2000, Inc. or its agents.In the event of a warranty claim, please contact the builder or dealer wherethe unit was originally purchased. In the event that is not possible, sendwritten notice of the defect by certified U.S. Mail to Plastpro 2000, Inc., 5200West Century Blvd.,9th Floor, Los Angeles, CA 90045 upon the discovery ofthe defect and only within the original warranty period.1. Door catalog number and description.2. Name and address of the owner and the installer.3. Proof of sale.4. Place of purchase and from whom purchased.5. Detailed explanation of defect.If Plastpro 2000, Inc. determines the Smooth Skin Fiberglass Door is defectivewithin the terms of the warranty, Plastpro 2000, Inc. will either (a) repair thedoor without charge,(b) furnish a replacement of the door from (installationcosts of the replacement doors and/or doorlite is not included), or (c) refundthe purchase price of the door in lieu of furnishing areplacement. If Plastpro 2000, Inc. elects to provide a replacement, theLimited Warranty of the replacement will extend for the balance of theoriginal warranty period. If the original owner fails to provide satisfactoryproof of the date of the purchase, the date of manufacture shall be usedinstead.The remedies set forth herein are the original owner's exclusive remedies forbreach of warranty. In no case shall Plastpro 2000, Inc. be liable to theoriginal owner or any other person for any general, incidental, orconsequential damages. There is no other warranty, expressed or implied,including warranties of merchantability and fitness for a particular purpose,except as is set







Manufacturer's Warranty - PlastPro Fiberglass Doors - TEXTURED

LIMITED LIFETIME WARRANTY ON RUSTIC, MAHOGANY, WOODGRAIN, FIR GRAIN FIBERGLASS DOORS Residential Warranty Holder

Plastpro Fiberglass Doors, as sold directly by Plastpro 2000, Inc. are guaranteed to be free of defects in material and workmanship that might unreasonably affect the performance. The termsof this Limited Lifetime Warranty initiates from the first date of purchase from an authorized retailer and continues for the stated duration as long as the original warranty holder owns and resides in the premises in which the product was installed. This warranty is for the original owner/user and is non-transferable.The terms of this Limited Warranty exclude failures which are the result of or involve: 1. Accident, negligence, abuse, improper installation (please see manufature installation guide), improper finishing or improper assembly of hardware, such as the lack of applying the sealant properly for the lockset, causing leakage or failure to reinforced material 2. Installed in abnormal or extreme locations or situations. 3. Improper pre-installation storage (please see manufacture installation instructions). 4. Damage caused by localized application of heat, movement of building or building components, or expansion/contraction ofbuilding or building components. 5. Damage caused by high winds, floods, fire and conditions that exceed Plastpro product design and testing specifications. 6. Damage caused by freight carriers, common carriers, private transportation, or any other means of transportation or handling occurring after shipping from Plastpro 2000, Inc. 7. Exposure of the door to extreme elements, storage, installation, maintenance or service. 8. Fire, corrosive fumes, stains, contact with chemically abrasive substances, acts of God, and/or any events or actions notcontrolled by Plastpro 2000, Inc, or what is considered normal wear and tear. 9. All components, parts, glass, and labor supplied by parties other than Plastpro 2000, Inc. or its agents. In the event of a warranty claim, please contact the builder or dealer where the unit was originally purchased. In the event that isnot possible, send written notice of the defect by certified U.S. Mail to Plastpro 2000, Inc., 5200 West Century Blvd.,9th Floor, Los Angeles, CA 90045 upon the discovery of the defect and only within the originalwarranty period.

1. Door catalog number and description. 2. Name and address of the owner and the installer. 3. Proof of sale. 4. Place of purchase and from whom purchased. 5. Detailed explanation of defect.

If Plastpro 2000, Inc. determines the Plastpro Fiberglass Door, is defective within the terms of the warranty, Plastpro 2000, Inc. will either (a) repair the door without charge (b) furnisha replacement of the door (installation costs of the replacement doors and/or doorlite is not included), or (c) refund the purchase price of the door in lieu of furnishing a replacement. If Plastpro 2000, Inc. elects to provide a replacement, the Limited Warranty will extend the balance of the original warranty period. If the original owner fails to provide satisfactory proof of the date of the purchase, the date of manufacture shall be used instead.The remedies set forth herein are the original owner's exclusive remedies for breach of warranty. In no case shall Plastpro 2000, Inc. be liable to the original owner or any other person for any general, incidental, or consequential damages. There is no other warranty, expressed or implied, including warranties of merchantability and fitness for a particular purpose, except as is set forth herein. No distributor, dealer, or Plastpro 2000, Inc. representative has the authority to change or modify this warranty and in no instance shall Plastpro 2000, Inc. be respo sible for indirect, consequential, or incidental damages. This warranty gives you specific legal rights, and you may also have other rights which vary from state to state. IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE SPECIFICALLY DISCLAIMED. SOME STATES DO NOT ALLOW LIMITATIONS OF IMPLIED WARRANTIES, SO THE ABOVE LIMITATION MAY NOT APPLY TO YOU.

***A Specific 3 Year Limited Warranty may apply to Commercial/Multi-Residential applications.***







Frame Saver Frames

Why Buy a FrameSaver® Door Frame?

FrameSaver® Features 1. Field Proven: Over a decade of “non-rot” performance.

2. FrameSaver® Lifetime Warranty.

• Will not rot or decay.

• Fully transferable.

3. Easily identifiable FrameSaver® Brand stamped right

onto the product.

• Ensures the quality.

4. Finishes and paints just like wood.

5. Patented composite bottom won’t absorb water so it won’t rot.

• Won’t wick water or swell.

• Rot never begins.

6. The composite material is finger-jointed to wood for a perfect fit

that maintains the structural integrity of the frame.

• Extremely strong and durable.

7. 180 Day Primer comes standard.

• 180 days of protection.

• Excellent coverage.

• Currently developing 100% lift/adhesion prevention.

• Improves top coat.

Why ask for FrameSaver® frames in your doors? FrameSaver® Door Frames from Endura are simply the best door frames on the market. They areso dependable that nobody can match. Our patented composite bottom

won’t absorb water, they come with a lifetime transferable warranty that warp, crack or rot and finishes and paints just like wood. FrameSaver’s® finger-jointed wood composite

protects the base of the frame from moisture exposure, and thus prevents water from wicking into the wood. Rot never

has a chance to begin. That’s Performance Standard.

All Steel and FiberGlass Door Units listed in this price book are priced using the primed FrameSaver frame.







k

FrameSaver® Wood Millwork Components Consumer Limited Lifetime Warranty

This Limited Lifetime Warranty applies to FrameSaver® exterior door frames, brick mould, mullions (mull posts), casing and other genuine FrameSaver® products (“FrameSaver Products” or “Product”) manufactured by Endura Products, Inc. (“Endura”). What This Warranty Covers: Subject to the limitations and exclusions below, Endura warrants that each FrameSaver Product will not rot, decay, or suffer fungal damage resulting from water absorption through the bottom of the Product under conditions in which it was originally installed. Installation Specifications: This Limited Warranty is expressly conditioned upon the installation of the FrameSaver Product in accordance with industry-accepted guidelines or local building codes, and Endura’s installation specifications that the composite portion of the FrameSaver Product must extend at least 3” up from the bottom of each leg. The composite end of the FrameSaver Product must be positioned at the bottom of the Product. Warranty Period: Lifetime from the date that the Product was originally purchased. Fully transferable. Endura also warrants to the original consumer that FrameSaver Products will be free from any defects in materials and workmanship which are not related to rot or decay in the bottom composite portion of the product for a period of one (1) year from the date of manufacture. Exclusive Remedy: In the event that the FrameSaver Product fails to meet this Warranty, Endura will (i) replace any defective product; and (ii) reimburse Warranty Holder for reasonable costs associated with removal, reinstallation, finishing, freight and/or taxes for the Product. Warranty Claims: If you have a problem with your FrameSaver Product, please contact the dealer/distributor from whom you purchased your product or contact us directly at:

Mail: Endura Products Customer Service Attn: FrameSaver Warranty Claims 8817 W. Market St., Colfax, NC 27235 Phone: (800) 334-2006 Fax: (336) 668-4478 Email: [email protected]

You can help us serve you faster by collecting and including the following important information: • Documentation of the Product proof of purchase and purchase date;• Written description of product issues or concerns;• A picture of the defective product;• Your name, address where the product is installed and telephone numbers.

What This Warranty Does Not Cover: This Warranty does not include non-conformities or damages attributable or arising from:

• Normal wear and tear, natural weathering of surfaces.• Rot, decay or other fungal damage to any portion of the frame other than the bottom five (5) inches of theProduct.• Warp within tolerances: bow no more than 7/8” per 6’ of length, crook or twist no more than 5/32” per 6’ of length,and cup nomore than 1/16” per 4” or more of width;• Product failure due to misuse or abuse; damage caused by failure to properly finish and provide maintenance, byalteration or modification of the product (e.g. machining of the composite portion of the FrameSaver Product). Allbare or unprotected wood surfaces should be primed and painted and top coated within 90 days of installationor exposure for continued warranty coverage.• Improper installation not in conformance with Endura installation instructions or current industry standards or local code conditions.

Important Legal Information: THIS WARRANTY IS EXCLUSIVE AND IN LIEU OF ANY AND ALL OTHER APPLICABLE WARRANTIES AND REMEDIES. ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE APPLICABLE TO FRAMESAVER® DOOR FRAMES IS LIMITED IN DURATION TO THE TERM OF THIS WARRANTY. Some states do not allow limitations on how long an implied warranty or exclusions of limitations of incidental or consequential damages may last, so these limitations may not apply to you. This Warranty gives you specific you specific legal rights. You may have other rights, which vary, from state to state. Installation and Finishing Requirements

1. Machining: Only the routing of mortises for hinges and locks may be done to the door jambs, mull posts andmull casing. Any trimming or cutting must be done in accordance with industry-accepted guidelinesand Endura’sinstallation specifications that the composite must extendat least 3” from the bottom face.2. Storage: Store only in dry and clean areas. Wood is dimensionally influenced by moisture changes in itssurrounding environment. Damp, moist or extremely humid environments may result in excessive warping,twisting or bowing of wood products.3. Mishandling: Do not drag, scrape of slide the door units. They should be lifted and carried. Any damage frommishandling of the product will void this and all future warranty claims.4. Rough Opening: No more than 1/2” higher and no more than 3/4” wider than the outer dimensions of the doorsystem frame. The rough opening should be no more than 1/8” out of plumb over the height of the opening. Thefloor or subfloor (subsill, the lowest horizontal structural member of the rough opening) should be capable of beingleveled to within 1/16” over the width of the opening. The subsill should not slope toward the interior of the home.








FrameSaver Limited Warranty (continued)

g

FrameSaver®

5. Caulking Sealer: Apply three beads of polyurethane sealant, ½” wide each, along entire rough openingunderneath sill.6. Level, Plumb and Square: Assure that the door system frame is located within the rough opening and shim sothat the frame is level, plumb and square. Shim behind each hinge, and the strike side of the frame oppositehinges. Shim behind deadbolt and strike plates.7. Anchoring: Nail or screw the door frame opening structure, do not use the brickmould to anchor unit to therough opening. At least one of the fasteners for each of the hinges and lock strike locations should penetratethrough the door system frame and into the rough stud to provide maximum holding strength and secureanchorage.8. Flashing: Install at the jambs, sill and head as required per manufacturer’s instructions to prevent water frompenetrating into the wall cavity.9. Caulking: All joints must be caulked between the rough opening and the door system frame. Caulk carefullybetween the sill andsubfloor to prevent water from entering below the door unit. Fill all gaps of ¼” or more with fillrod. Use only recommended caulking sealants and apply in accordance with the caulking sealantmanufacturer’sinstallation instructions.10. Field Service: It is the responsibility of the installing contractor and painter to fill all nail or screw holes andrefinish raw surfaces that result from job fitting, and the cleaning of surfaces prior to painting.

Painting Instructions 1. Apply topcoat within 90 days of installation. If longer than 90 days, the primed surface should be sanded,cleaned and field-primed with Sherwin-Williams X-I-M Primer Sealer prior to finishing.2. Thoroughly dry, make free of dust, dirt, oil, grease, wax, chalk and other contaminants.3. A high quality exterior latex paint, preferably a 100% acrylic based product, should be used as a finish coat.4. Follow the paint manufacturer’s recommendations on thinning, application techniques, re-coat and dry times.5. In general, paint should be applied when both the surface and air temperature is between 50 and 90 degreesF.Relative humidity should be below 85%. 6. DO NOT paint weatherstrip or corner pads. Paints, stains andvarnishes contain solvents which, when coming in contactwith plastics and vinyl used in weatherstripping, causethese materials to lose their flexible qualities, making them brittle.7. Repainting every 1 to 5 years will be required, depending upon weather exposure and the paint manufacturer’s recommendations. Any signs of blistering, peeling or cracking the finish should be immediately repaired to protect the wood underneath. Failure to properly protect the frame with a top coat will result in wood damage, including finger joint damage. 8. Recaulking is required to maintain integrity of joints. Any signs of cracks along joints of the brickmould, frames,headers or mulls should be immediately resealed with a high quality exterior caulk.






STEEL and FIBERGLASS DOOR UNITSPlastPro PFTM ALL COMPOSITE Frames

We stock the PF frame in Primed White and Textured Tan frame.

An upgrade to the All Composite PlastPro PF frame is available on Most of our Exterior Steel and FiberGlass Door Units

PFTM Frames from PlastPro, Inc. are an innovative alternative to traditional wood door jambs. After extensive research and development, PlastPro has formulated a poly-fiber doorframe system that combines all the strengths and convenience of wood with enhanced properties that make it moisture, rot, and insect resistant. This unique formulation means that PlastPro’s PFTM

Frames will not absorb or wick moisture and will never warp, splinter, or rot. And the advanced Frame system can be machined the same way as traditional wood jambs with no added hassles. PlastPro’s PFTM Frames guarantee a long-lasting, rot-free entryway that will maintain its integrity today, as well as years down the road.







For added protection against water infiltration see OPTIONS pages in this section and Section

10 for:

LIMITED LIFETIME WARRANTY ON PLASTPRO PF™ FRAMES Plastpro PF™ Frames, as sold directly by Plastpro 2000, Inc., are guaranteed to be free of defects in material and workmanship that might unreasonably affect its performance. The terms of this Limited Lifetime Warranty extends from the first date of purchase at retail for the life of the product, as long as the original owner owns Plastpro PF™

Frames. This warranty is for the original user and is non-transferable. If Plastpro 2000, Inc. determines the PF™ Frames are defective within the terms of the warranty, Plastpro 2000, Inc. will either (a) repair the PF™ Frames without charge, (b) furnish a replacement of the PF™ Frames from stock (installation costs of the replacement PF™ Frames is not included), or (c) refund the purchase price of the product in lieu of furnishing a replacement. If Plastpro 2000, Inc. elects to provide a replacement, the Limited Warranty of the replacement will extend only for the balance of the original warranty period. If the original owner fails to provide satisfactory proof of the date of the purchase, the date of manufacture shall be used instead. *This warranty does not cover dark colors. Dark colors are considered any color that falls within the lightness (L) value of 56 to 0, where 100 is white and 0 is black. If Plastpro 2000, Inc. elects to provide a replacement product, the Limited Warranty of the replacement will extend only for the balance of the original warranty period. If the original owner fails to provide satisfactory proof of the date of the purchase, the date of manufacture shall be used instead. If Plastpro decides to replace the Product(s) according to the above guidelines, you may be required to return the defective Product(s), at our cost, to us, which will become our property. We will then deliver replacement or repaired Product(s), at our expense, to the original address from which the defective Product(s) were delivered to us. Our liability, at no time, shall exceed the purchase price of the Product(s). The warranty on replacement product will extend for the remained of the warranty period of the original unit. The remedies set forth herein are the original owner's exclusive remedies for Breach of Warranty. In no case shall Plastpro 2000, Inc. be liable to the original owner or any other person for any general, incidental, or consequential damages. There is no other warranty, expressed or implied, including warranties of merchantability and fitness for a particular purpose, except as is set forth herein. No distributor, dealer, or Plastpro 2000, Inc. representative has the authority to change or modify this warranty and in no instance shall Plastpro 2000, Inc. be responsible for indirect, consequential, or incidental damages. This warranty gives you specific legal rights, and you may also have other rights which vary from state to state. IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE SPECIFICALLY DISCLAIMED. SOME STATES DO NOT ALLOW LIMITATIONS OF IMPLIED WARRANTIES, SO THE ABOVE LIMITATION MAY NOT APPLY TO YOU. The terms of this Limited Warranty exclude failures which are the result of or involve:

1. Accident, negligence, abuse or improper use or installed in unusual, abnormal or extreme locations or situations.2. Stress caused by localized application of heat, movement of building or building components, or expansion/contraction ofbuilding or building components. 3. Damage caused by freight carriers, common carriers, private transportation, or any other means of transportation or handling, occurring after shipping from Plastpro 2000, Inc.4. Damage to surfaces caused by fire, corrosive fumes, stains, contact with chemically abrasive substances, airborne pollutants, sanding, improper washing, extreme elements, acts of God and / or any event not controlled by Plastpro 2000, Inc.5. Damage done deliberately, by negligence, abnormal working conditions, or failure to follow instructions regarding staining, painting or installations or what is considered normal wear and tear.6. Custom surface finishes or alternations applied to product(s) in the field. 7. Door hardware is not warranted.8. Improper or insufficient handling, storage, installation, maintenance, or service.9. All components, parts, and labor supplied by parties other than Plastpro, 2000 Inc. or its agents.

In the event of a warranty claim, please contact the builder or dealer where the unit was originally purchased. In the event that is not possible, send written notice of the defect by certified U.S. Mail to Plastpro 2000, Inc., 5200 West Century Blvd., 9th Floor, Los Angeles, CA 90045 upon the discovery of the defect. The written notice must include the following:

1. Door catalog number and description. 2. Name and address of the owner and the installer.3. Proof of sale.4. Place of purchase and from whom purchased.5. Detailed explanation of defect.







Door Specifications

10 - 12

13 - 14

15 - 16

Boring SpecificationsStandard bore: 2-1/8" lock bore at 2-3/8" backset.Deadbolt bore: 2-1/8" at 5-1/2" o/c above standard.

2-8 31-3/4"

Door Size Actual net width 2-0 23-3/4" 2-6 29-3/4'

3-0 35-3/4"







Unit and Rough Opening Specifications

Height (Outside Frame) (Outside Brickmould) Height6-8 81 11/16 82 15/16 82

Open out units with bumper sills are 5/8" shorter in frame and brick mould height than open in units. The outside brickmould width is 1/2" wider.

6-8 with 12" Transom 95 3/16 96 7/16 95 1/2

8-0 97 11/16 98 15/16 98

1-0 / 3-0 / 1-0 64 7/16 66 15/16 65

1-2 / 3-0 / 1-2 68 7/16 70 15/16 69

Door Size Actual Unit Height Actual Unit Height Rough Opening

4-0 49 15/16 52 7/16 50 1/2

5-0 61 15/16 64 7/16 62 1/2

6-0 73 15/16 76 7/16 74 1/2

5-4 65 15/16 68 7/16 66 1/2

2-6 31 7/16 33 15/16 32

2-8 33 7/16 35 15/16 34

3-0 37 7/16 39 15/16 38

Door Size Actual Unit Width Actual Unit Width Rough Opening

2-0 25 7/16 27 15/16 26

Width Outside Frame (inches) (Outside Brickmould) (inches) Width (inches)






STEEL and FIBERGLASS DOOR UNITS with FrameSaver

slide Bolts All prices are LIST. Single Double Side Lts

For Double Bore ADD $10 $10 $10Screw Type Adjustable Sill, Mill ADD $13 $27 includedScrew Type Adjustable Sill, Bronze ADD $24 $46 $30For ZAC Self Adjusting' Mill sill ADD 24 48 includedFor ZAC Self Adjusting Bronze sill ADD 34 67 30For open out with bumper Mill sill and NRP hinge ADD 25 46 71For open out with bumper Bronze sill and NRP hinge ADD 36 66 91For PF Composite jamb 4-5/8" ADD 66 84 84For Primed Frame (not Frame Saver) - 4-5/8"x6-8" (only) DEDUCT 28 32 32

47 in this section.

FLUSH GLAZED 1 Lt - LowE

n/s $615 n/s

n/s 615 n/s

n/s 615 n/s

n/s 615 n/s

n/s 1,254 n/s

n/s 1,254 n/s

n/s 1,254 n/s

n/s 1,254 n/s

2-0 x 6-8 Single2-6 x 6-8 "2-8 x 6-8 "

4-0 x 6-8 Double3-0 x 6-8 "

Standard Specifications: FRAME SAVER Frame - primed finger-jointed, with composite bottom jambs. Beige Q-Lon compression weatherstrip. 1-1/4" x 2" primed finger-jointed WM 180 Frame Saver Brick Mould.

High-dam aluminum sill with vinyl threshold cap. 1-1/2 pair primed 4 x 4 hinges.White Aluminum Ultimate Astragal with Push Bolts on doubles.

6-8 Units For other Frame and Unit options see page

Fiberglass Smooth

Flush Glazed doors are clean looking, smooth finished, one light doors

with no raised moulding. The intergral light allows for smaller stiles and rails,

and a larger glass area with up to 35% more daylight area than a conventional door with an

insert.

SDL - Simulated Divided Light - option is available on Direct Glazed doors. See SDL Option in the OPTIONS pages at the end of this section.

6-8

5-0 x 6-8 "5-4 x 6-8 "6-0 x 6-8 "

Full LiteFlush Glazed - Full Light









47 in this section.

Standard Specifications: FRAME SAVER Frame - primed finger-jointed, with composite bottom jambs. Beige Q-Lon compression weatherstrip. 1-1/4" x 2" primed finger-jointed WM 180 Frame Saver Brick Mould. High-dam aluminum sill with vinyl threshold cap. 1-1/2 pair primed 4 x 4 hinges. White Aluminum Ultimate Astragal with Push Bolts on doubles.

For other Frame and Unit options see page

FLUSH GLAZED 1 Lt / PANEL

n/s $852 $870 n/s 852 870 n/s 852 870

n/s 1,728 1,766 n/s 1,728 1,766 n/s 1,728 1,766

6-8

Flush Glazed 1 Lt / Panel 3/4 Lite over One Panel

Fiberglass Smooth

2-8 x 6-8 "3-0 x 6-8 "

5-0 x 6-8 "5-4 x 6-8 "6-0 x 6-8 "

Flush Glazed doors are clean looking, Smooth or Mahogany Textured finished,

one light doors with no raised moulding. The intergral light allows

for smaller stiles and rails, and a larger glass area with up to 35% more daylight area than a conventional door with an

insert.


6-8 Units

Mahogany Textured

2-6 x 6-8 Single









47 in this section.




Insert

1464-1lt 2-0 x 6-8 Single $518 $617 $7262064-1lt 2-6 " " 484 583 6922264-1lt 2-8 " " 484 583 6922264-1lt 3-0 " " 484 583 6921464-1lt 4-0 " Double 1,062 1,260 1,4762064-1lt 5-0 " " 994 1,192 1,4082264-1lt 5-4 " " 994 1,192 1,4082264-1lt 6-0 " " 994 1,192 1,408

RLB 1464 1L 2-0 x 6-8 Single $741 $840 $948RLB 2064 1L 2-6 " " 717 816 924RLB 2264 1L 2-8 " " 717 816 924RLB 2264 1L 3-0 " " 717 816 924RLB 1464 1L 4-0 " Double 1,506 1,704 1,921RLB 2064 1L 5-0 " " 1,459 1,657 1,873RLB 2264 1L 5-4 " " 1,459 1,657 1,873RLB 2264 1L 6-0 " " 1,459 1,657 1,873

Full Light

Stock inserts are paintable. Inserts

with a stainable frame may be available. Please check with

office.

Full Lite

Full Light with Blinds Full Lite w/ Raise & Lower Blinds

SteelFiberglass

SmoothFiberglass Textured

6-8 UnitsFull Light Inserts









47 in this section.




These inserts are Stainable

Insert

2064-8lt SDL n/s $875 $9842264-8lt SDL $776 875 9842264-8lt SDL 776 875 9842064-8lt SDL n/s 1,776 1,9922264-8lt SDL 1,578 1,776 1,9922264-8lt SDL 1,578 1,776 1,992

2248 -4lt SDL n/s 858 $1,0312248 -4lt SDL 737 858 1,0312248 -4lt SDL n/s 1,741 2,0872248 -4lt SDL 1,498 1,741 2,087

2248 -6Lt SDL n/s $841 $1,0142248 -6Lt SDL $719 841 1,0142248 -6Lt SDL n/s 1,707 2,0532248 -6Lt SDL 1,464 1,707 2,053

SDL - 6Lt / 2Pnl

6-8 Units

Fiberglass Textured

6 Light SDL over panel -3/4 Lite2-8 " Single3-0 " "5-4 " "6-0 " "

6-0 " "

SDL Insert

2-6 x 6-8 Single

6-0 " "

2-8 " Single3-0 " "5-4 " "

SDL - 4Lt / 2Pnl 4 Light SDL over panel -3/4 Lite

SDL - 8 Lt 8 Lite SDL Grid -Full lite

2-8 " "

5-4 " "

3-0 " "5-0 " Double

The look of a true divided lite with a butyl backing strip and an internal

spacer.

Fiberglass Smooth

Steel









47 in this section.




Insert

2064-15lt $503 $602 $7102264-15lt 503 602 7102264-15lt 503 602 7102064-15lt 1,031 1,229 1,4462264-15lt 1,031 1,229 1,4462264-15lt 1,031 1,229 1,446

1464-10lt $518 $617 $7262064-10lt 508 607 7152264-10lt 508 607 7152264-10lt 508 607 7151464-10lt 1,062 1,260 1,4762064-10lt 1,041 1,239 1,4562264-10lt 1,041 1,239 1,4562264-10lt 1,041 1,239 1,456

2-8 " "3-0 " "

Full 15 Lt 15 Lite External Grid

3-0 " "

4-0 " Double

5-0 " Double

Full 10 Lt 10 Lite External Grid

5-4 " "6-0 " "

SteelFiberglass


6-8 UnitsFull Divided Light

5-4 " "6-0 " "

2-0 x 6-8 Single

5-0 "

Stock inserts are paintable.

Inserts with a stainable frame may be available. Please check with office.

2-6 x 6-8 Single2-8 " "

2-6 "









47 in this section.




Insert

2064-6lt $750 $849 $9582264-6lt 750 849 9582264-6lt 750 849 9582064-6lt 1,525 1,723 1,9402264-6lt 1,525 1,723 1,9402264-6lt 1,525 1,723 1,940

2064- 8lt 750 849 9582264- 8lt 750 849 9582264- 8lt 750 849 9582064- 8lt 1,525 1,723 1,9402264- 8lt 1,525 1,723 1,9402264- 8lt 1,525 1,723 1,940

5-0 " Double

2-6 x 6-8 Single

3-0 " "2-8 " "

Fiberglass Textured

6-0 " "


SteelFiberglass

Smooth

Full 6 Lt

5-0 " Double

6-0 " "

6 Lite External Grid

5-4 " "

Full 8 Lt 68Lite External Grid

2-6 x 6-8 Single2-8 " "

5-4 " "

3-0 " "











47 in this section.




$360 $445 $553360 445 553360 445 553745 915 1,131745 915 1,131745 915 1,131

$418 $445 523418 445 523861 915 1,071861 915 1,071

ns ns 651ns 468 651ns ns 1,328ns 960 1,328

3-0 " "5-4 " "6-0 " "

5-0 " Double5-4 " "6-0 " "

2-8 " "3-0 " "5-4 " "6-0 " "

6 Panel 6 Panel

New England (True) 4 Panel 4 Panel

2-6 x 6-8 Single2-8 " "3-0 " "

3/4 4 Panel 4 Panel2-8 " "

Steel Fiberglass Textured

6-8 UnitsPanel Doors

Fiberglass Smooth









47 in this section.




n/s $475 n/s

395 475 n/s

n/s 975 n/s

815 975 n/s

n/s $551 n/s 551 n/s 1,126 n/s

n/s 1,126 n/s

$395 $475 n/s

395 475 n/s

815 975 n/s

815 975 n/s

Fiberglass Textured

2 PNL ARCH TOP

5-4 " "6-0 " "

3-0 " "

3-0 " "5-4 " "

2-8 " "

2 Panel Square

2 Panel Arch Top

6-0 " "

SteelFiberglass

Smooth

2 PNL Cottage - Arch Plank

3-0 " "5-4 " "

2-8 " "

2-8 " "

6-0 " "

2 PNL SQR

See RUSTIC SERIES Fiberglass

2 Panel Cottage with V-Groove Panels

Panel Doors6-8 Units









47 in this section.




Insert

0806 -1LT $438 $523 ns0806 -1LT 438 523 6320806 -1LT 902 1,072 ns0806 -1LT 902 1,072 1,288

2206 -4LT $441 $526 ns2206 -4LT 441 526 6342206 -4LT 907 1,077 ns2206 -4LT 907 1,077 1,293

2-8 x 6-8 Single

Panel Doors

Colonial 4 Lite External Grid4Lt / 4Pnl

6-8 Units

6-0 " "

3-0 " "

2Lt / 4Pnl

5-4 " Double6-0 " "

3-0 " "5-4 " Double

2-8 x 6-8 Single



Steel

With Inserts

Colonial 2 Lite

Fiberglass Textured

Fiberglass Smooth









47 in this section.




Insert

n/s $524 n/s

1,073

2215-1LT LE n/s $738 n/s

2215-1LT LE 1,501

6-0 " "

6-0 " "

Craftsman / 3 Flat Panel Shaker

Craftsman 1LT / 2 Flat Panel Shaker

DRS3F3-0 x 6-8 Single

DRS3F -1LT LE3-0 x 6-8 Single

* DRS3F-1LT Shaker door has a22x15 1Lt LowE insert.

SDL bars can be applied toprovide for a 2, 3, 4, or 6 light

design. See the SDL option in the

"OPTIONS" area in the back of this section.


Fiberglass Smooth

Craftsman









47 in this section.




36" insert

Insert

2036-9lt $442 $527 $6352236-9lt 442 527 6352236-9lt 442 527 635

2236-4lt $568 $654 $7622236-4lt 568 654 762

2036 1 Lt $442 $527 $6352236 1 Lt 435 520 6282236 1 Lt 435 520 628

RLB 2036 1Lt $673 $758 $866RLB 2236 1Lt 673 758 866RLB 2236 1Lt 673 758 866

1/2 Lite w/ Raise & Lower Blinds

1 Lite / Two Panel

2-8 " "3-0 " "

9 Lt / 2 Panel

2-8 x 6-8 Single3-0 " "

2-6 x 6-8 Single2-8 " "

1 Lt / 2 Panel

2-6 x 6-8 Single

1Lt Blinds / 2 Panel

4 Lt / 2 Panel 4 Lite External Grid

2-6 x 6-8 Single

3-0 " "

3-0 " "

2-8 " "


w/ 1/2 Lt Inserts

9 Lite External Grid

SteelFiberglass












47 in this section.




48" inseert

Insert

2248 1 Lt 2-8 x 6-8 Single n/s $610 $6552248 1 Lt 3-0 " " 537 610 6552248 1 Lt 5-4 " Double n/s 1,245 1,3342248 1 Lt 6-0 " " 1,099 1,245 1,334

2248 4 Lt n/s $812 $8562248 4 Lt 739 812 8562248 4 Lt n/s 1,648 1,7382248 4 Lt 1,503 1,648 1,738

2248 RLB n/s $854 $8992248 RLB 782 854 8992248 RLB n/s 1,734 1,8232248 RLB 1,588 1,734 1,823

SteelFiberglass


2/3 1Lt / 2 Panel 1 Lt -2/3 Lite

5-4 " Double6-0 " "

2/3 4Lt / 2 Panel 2-8 x 6-8 Single3-0 " "

2/3 Lt Blinds / 2 Panel

5-4 " Double6-0 " "

1 Lt RLB -2/3 Lite2-8 x 6-8 Single3-0 " "

4 Lt -2/3 Lite



6-8 UnitsPanel Doorsw/ 2/3Lt Inserts









47 in this section.




Insert

590 Sun 5Lt $442 $509 n/s590 Sun 5Lt 442 509 628590 Sun 5Lt 908 1,044 n/s590 Sun 5Lt 908 1,044 1,282

Fiberglass Smooth

Fiberglass Textured

2-8 x 6-8 Single3-0 " "5-4 " "

Sunburst

Steel

5 Lt Sunburst / 4Panel

6-0 " Double

6-8 Units5 Light 1/2 Circle









47 in this section.




36" insert

Insert

2-0 x 6-8 Single $357 $445 $5532-6 " " 357 445 n/s2-8 " " 357 445 n/s3-0 " " 357 445 5534-0 " Double 714 890 1,107

714 890 n/s714 890 n/s714 890 1,107

2036-1lt $439 $538 n/s2236-1lt 432 531 n/s

" 432 531 628

2236-VL 2-8 x 6-8 Single $552 651 n/s" 3-0 " " 552 651 748



6-8 UnitsFlush & Panel Doors

5-4 " "6-0 " "

3-0 " "

2-6 x 6-8 Single2-8 " "

Vent Light Insert

1/2 Lt Flush bottom

5-0 " "

Flush -1/2 Lite Half Lite

Flush with Vent Lite

FLUSH

Fiberglass Textured

Fiberglass Smooth

Steel

Flush









47 in this section.




36" insert

64" insert

2236 1 Lt LowE 2-8 " " $463 $559 $6562236 1 Lt LowE 3-0 " " 463 559 656

2264 1 Lt LowE 2-8 x 6-8 Single $541 $640 $7492264 1 Lt LowE 3-0 " " 541 640 749

2264 1 Lt LowE 5-4 x 6-8 Double 1,089 1,287 1,5032264 1 Lt LowE 6-0 " " 1,089 1,287 1,503

LowE Inserts

1 Light LowEFull 1 Lt LowE



SteelFiberglass


1 Lt LowE / 2 Panel 1 Lite LowE / Two Panel

6-8 Units









47 in this section.




n/s n/s $988 n/s n/s 2,001

Fiberglass Textured

2 PNL ARCH TOP PLANK3-0 x 6-8

DRA2A

6-8 UnitsRUSTIC SERIES

6-0 x 6-8









47 in this section.




FLUSH GLAZED 1 Lt -LowE

n/s $882 n/s

n/s 882 n/s

n/s 882 n/s

n/s 882 n/s

1,783 n/s

n/s 1,783 n/s

n/s 1,783 n/s

n/s 1,783 n/s

8-0 Units

Flush Glazed doors are clean looking, smooth finished, one light doors

with no raised moulding. The intergral light allows for smaller stiles and rails,

and a larger glass area with up to 35% more daylight area than a conventional door with an

insert.


8-0

2-8 x 8-0 "

2-0 x 8-0 Single

3-0 x 8-0 "

5-0 x 8-0 "4-0 x 8-0 Double

5-4 x 8-0 "

Fiberglass Smooth

6-0 x 8-0 "

Flush Glazed / Direct Glazed Full Lite

2-6 x 8-0 Single









47 in this section.




FLUSH GLAZED 1 Lt / PANEL

$938 $1,001938 1,001938 1,001

1,896 2,0221,896 2,0221,896 2,022

8-03-0 x 8-0 "

5-4 x 8-0 "

2-6 x 8-0 Single

5-0 x 8-0 Double

Fiberglass Smooth

Mahogany Textured

6-0 x 8-0 "

8-0 Units

Flush Glazed doors are clean looking, Smooth or Mahogany Textured finished,

one light doors with no raised moulding. The intergral light allows

for smaller stiles and rails, and a larger glass area with up to 35% more daylight area than a conventional door with an

insert.


2-8 x 8-0 "









47 in this section.




80" insert

Insert

1480 1Lt 2-0 x 8-0 Single $893 $996 n/s2080 1Lt 2-6 x 8-0 " 851 954 1,1262280 1LT 2-8 x 8-0 " 851 954 1,1262280 1LT 3-0 x 8-0 " 851 954 1,1261480 1Lt 4-0 x 8-0 Double 1,805 2,010 n/s2080 1Lt 5-0 x 8-0 " 1,722 1,928 2,2722280 1LT 5-4 x 8-0 " 1,722 1,928 2,2722280 1LT 6-0 x 8-0 " 1,722 1,928 2,272

RLB 2080 1Lt 2-6 x 8-0 Single $1,227 $1,329 $1,501RLB 2280 1Lt 2-8 x 8-0 " 1,227 1,329 1,501RLB 2280 1Lt 3-0 x 8-0 " 1,227 1,329 1,501RLB 2080 1Lt 5-0 x 8-0 Double 2,473 2,678 3,022RLB 2280 1Lt 5-4 x 8-0 " 2,473 2,678 3,022RLB 2280 1Lt 6-0 x 8-0 " 2,473 2,678 3,022

Fiberglass Textured

SteelFiberglass

Smooth

Full Light

Full Light with Blinds 1 Lt w/ Raise & Lower Blinds

1 Lt

Stock inserts are paintable. Inserts

with a stainable frame may be available. Please check with

office.

Full Light Inserts8-0 Units









47 in this section.




48" insert

Insert

2248 4Lt SDL $992 $1,162 $1,2562248 4Lt SDL 992 1,162 $1,2562248 4Lt SDL 1,910 2,251 2,4372248 4Lt SDL 1,910 2,251 2,437

2248 6Lt SDL $974 $1,145 $1,2382248 6Lt SDL 974 1,145 $1,2382248 6Lt SDL 1,968 2,309 2,4962248 6Lt SDL 1,968 2,309 2,496

External SLD GridTan/Stainable Insert

Simulated Divided Light

SDL - 4Lt 4 Light SDL -2/3 Lite

5-4 x 8-0 Double

SteelFiberglass


2/3 LIGHT SDL SERIES

The look of a true divided lite with a butyl backing strip and

an internal spacer.

5-4 x 8-0 Double

2-8 x 8-0 Single3-0 x 8-0 "

6-0 x 8-0 "

8-0 Units

6-0 x 8-0 "SDL - 6Lt

3-0 x 8-0 "2-8 x 8-0 Single

6 Light SDL -2/3 Lite









47 in this section.




80" insert

Insert

2280 18Lt $883 $986 $1,1582280 18Lt 883 986 1,1582280 18Lt 1,785 1,991 2,3352280 18Lt 1,785 1,991 2,335

2080 8Lt $1,141 $1,244 $1,4162280 8Lt 1,159 1,261 1,4332280 8Lt 1,159 1,261 1,4332080 8Lt 2,301 2,507 2,8512280 8Lt 2,336 2,542 2,8862280 8Lt 2,336 2,542 2,886

18 Lt External

8 Lt External

5-4 x 8-0 "

SteelFiberglass


6-0 x 8-0 "


5-0 x 8-0 Double

2-6 x 8-0 Single2-8 x 8-0 "

2-8 x 8-0 "

Full 8 Lt

3-0 x 8-0 "5-4 x 8-0 "6-0 x 8-0 "

Full 18 Lt

3-0 x 8-0 "









47 in this section.




80" insert

Insert

2280 1Lt LowE $921 $1,024 $1,1962280 1Lt LowE 921 1,024 1,1962280 1Lt LowE 1,861 2,067 2,4112280 1Lt LowE 1,861 2,067 2,411

Full 18 Lt 18 Lt External

2-8 x 8-0 "3-0 x 8-0 "5-4 x 8-0 "6-0 x 8-0 "

8-0 UnitsFull Light LowE

SteelFiberglass










47 in this section.




Flush DD-1 -8'n/s $704 n/sn/s 704 n/sn/s 704 n/s

3-0 x 8-0 " $599 704 n/sn/s 1,427 n/sn/s 1,427 n/sn/s 1,427 n/s

6-0 x 8-0 " 1,218 1,427 n/s5-4 x 8-0 "

SteelFiberglass

Smooth

8-0 UnitsFlush Doors

2-0 x 8-0 Single

4-0 x 8-0 Double5-0 x 8-0 "

2-6 x 8-0 "

Flush

2-8 x 8-0 "

Fiberglass Textured









47 in this section.




n/s $782 $876$604 782 876604 782 876n/s 1,584 1,771

1,226 1,584 1,7711,226 1,584 1,771

n/sn/s $782 $876

n/sn/s 1,584 1,771

2-8 x 8-0 "3-0 x 8-0 "5-0 x 8-0 Double5-4 x 8-0 "6-0 x 8-0 "

2-6 x 8-0 Single

8-0 Units

Fiberglass Smooth

6 Panel

6-0 " "

3-0 " "

4 Panel 4 Panel

6 Panel

8-Feb

Panel Doors









47 in this section.




n/s $752n/s 752

1,5291,529

n/s $738n/s 738

1,5021,502

6-0 " "

2 Panel Square 2-8 x 8-0 Single

5-4 " Double

Fiberglass Smooth

2-8 x 8-0Single3-0 " "5-4 " Double

2 Panel Square

2 Panel Arch

6-0 " "

2 Panel Arch

Panel Doors

See RUSTIC SERIES Fiberglass

See RUSTIC SERIES Fiberglass3-0 " "

8-0 Units









47 in this section.




Insert

22481Lt $735 n/s n/s22481Lt 735 914 $1,00722481Lt 1,489 n/s n/s22481Lt 1,489 1,847 2,034

2248 RLB $988 n/s n/s2248 RLB 988 1,158 $1,2522248 RLB 1,995 n/s n/s2248 RLB 1,995 2,336 2,523

8-0 Units2/3 LIGHT SERIES

2/3 Lt Blinds / 2 Panel rlb2-8 x 8-0 Single3-0 x 8-0 "5-4 x 8-0 Double6-0 x 8-0 "

Fiberglass Smooth

1 Lt -2/3 Lite

External Grid

2-8 x 8-0 Single

Fiberglass Textured

Steel



3-0 x 8-0 "5-4 x 8-0 Double6-0 x 8-0 "

2/3 1Lt / 2 Panel









47 in this section.




Insert

2248 4Lt $945 n/s n/s2248 4Lt 945 1,116 1,2092248 4Lt 1,910 n/s n/s2248 4Lt 1,910 2,251 2,437

2248 6Lt $945 n/s n/s2248 6Lt 945 1,116 1,2092248 6Lt 1,910 n/s n/s2248 6Lt 1,910 2,251 2,437

External Grid


2/3Lt 6 Lt -8'

5-4 x 8-0 Double

5-4 x 8-0 Double

6-0 x 8-0 "

2-8 x 8-0 Single

6-0 x 8-0 "

Fiberglass Smooth

4 Lt external grid

6 Lt external grid

3-0 x 8-0 "

2/3Lt 4 Lt -8'2-8 x 8-0 Single3-0 x 8-0 "

Fiberglass Textured









47 in this section.




Insert

1 Lt Smooth Txt 2264-1lt n/s $1,050 n/s2264-1lt n/s 1,050 $1,2822264-1lt n/s 2,119 n/s2264-1lt n/s 2,119 $2,583

RLB 2264 1L n/s $1,282 n/sRLB 2264 1L n/s 1,282 $1,515RLB 2264 1L n/s 2,584 n/sRLB 2264 1L n/s 2,584 $3,048


3-0 x 8-05-4 x 8-0 double6-0 x 8-0

3/4 1Lt / 2 Panel 2-8 x 8-0

Fiberglass Smooth

3/4 Lt Blinds / 2 Panel R & L Blinds -3/4 Lite2-8 x 8-0



3-0 x 8-05-4 x 8-06-0 x 8-0

Fiberglass Textured









47 in this section.




Insert

2264-6lt n/s $1,316 n/s2264-6lt n/s 1,316 $1,5482264-6lt n/s 2,650 n/s2264-6lt n/s 2,650 $3,115

2264- 8lt n/s $1,316 n/s2264- 8lt n/s 1,316 $1,5482264- 8lt n/s 2,650 n/s2264- 8lt n/s 2,650 $3,1156-0 x 8-0

2-8 x 8-03-0 x 8-0

3/4 8Lt / 2 Panel 8 Lt -3/4 Lite

2-8 x 8-03-0 x 8-05-4 x 8-0 double6-0 x 8-0

5-4 x 8-0 double

3/4 6Lt / 2 Panel

Fiberglass Smooth

Fiberglass Textured


External Grille Insert

6 Lt -3/4 Lite









47 in this section.




2248 6Lt GBG n/s n/s $1,4582248 6Lt GBG n/s n/s 2,940

2248 6Lt GBG n/s n/s $1,3532248 6Lt GBG n/s n/s 2,731

Fiberglass Textured

8-0 UnitsRUSTIC SERIES

2 PNLARCH TOP PLANK3-0 x 8-0

2 PNL SQUARE TOP PLANK3-0 x 8-0

6-0 x 8-0

DRA2A80

6-0 x 8-0

DRA2P80







OPTIONS: Single Sidelite

DEDUCT 232.57DEDUCT 260.24

Standard Side Light Units

1/2 Lite 1'0" & 1'2" $458 1'0" & 1'2" $533 1'0" & 1'2" $6181/2 Lite 1'0" & 1'2" 458 1'0" & 1'2" 533 1'0" & 1'2" 618Full Lite 1'0" & 1'2" 473 1'0" & 1'2" 553 1'0" & 1'2" 578Full Lite 1'0" & 1'2" 475 1'0" & 1'2" 555 1'0" & 1'2" 5802/3 Lite 1'0" & 1'2" 565 1'0" & 1'2" 641 1'0" & 1'2" 6662/3 Lite 1'2" 850

1'0" & 1'2" 405 1'0" & 1'2" full 481 1'0" & 1'2" 506

Full Lite 1'2" only 754 1'2" (14") $854 n/s

2/3 Lite n/s " 701 n/s

3/4 Lite n/s " 787 n/s

3/4 Lite n/s 1'2" 1,008 n/s

1'2" only 529 " 682 n/s n/s

* Add decorative inserts for complete sidelight unit

S/L frames with Open S/L panel - For decorative inserts* * Add decorative inserts for complete sidelight unit

1Lt 80"

NOTE: 14" fiberglass sidelight panels cannot be cut down to 12". If a needed 12" is not stock it may have to be special ordered.

1Lt 48" / Pnl1Lt 64" / Pnl

Flsh Glzd -1Lt/Pnl

5Lt 64"1 64"

1 Lt 48"

8'0"

Prices are for each sidelight unit.

ADD this price to the steel or fiberglass door unit of choice for each sidelight

needed.

6'8" 1Lt 36" / Pnl3Lt 36" / Pnl

Flsh Glzd -1Lt/PnlS/L frames with Open S/L panel

- For decorative inserts*

Steel

Standard sidelight units are mulled to fiberglass and steel door units and will have a continuous

aluminum sill.

For other options see OPTIONS pages beginning on the next page. All prices are LIST.

Specifications: FRAME SAVER Frame -Rabbeted primed finger-jointed jambs with Composite bottom. FRAME SAVER WM 180 All Purpose Brick Mould. Adjustable High-dam aluminum continuous sill

with vinyl threshold cap. Mulled to standard door unit.

For SideLite Panel Only - no frame. 6-8For SideLite Panel Only - no frame. 8-0

Fiberglass Textured

Fiberglass Smooth







FRAME SAVER Frame = Primed wood with composite bottom Sidelite

PF Frame = All Composite Unit

Primed = Primed FJ (no composite) 1-2/3-0/1-2

To LIST Price

FrameSaver Jambs to 5-1/4" ADD $36 $52 $52

FrameSaver Jambs to 6-9/16" ADD 60 74 74

FrameSaver Jambs to 8-7/8" ADD 144 190 190

Primed Frame (not FrameSaver) - 4-5/8"x6-8" (only) DEDUCT 28 32 32

Ripped Down Jambs from 4-5/8" * ADD 14 16 42

PF PRIMED Composite jamb 4-5/8" ADD 66 84 84



PF TEXTURED Composite jamb 4-5/8" ADD 98 144 144



Composite Jamb Extenders. For applied extender: ADD** $175 $204 $204

Spread mull on sidelight units - up to 4" ADD $100(standard mull is 1-1/2") per mull

Continuous Head and Sill on Triple or Quad units up to 12', that are greater

than 1/-2/3-0/1-2 units. After all sill and frame options are applied. ADD $192

Some limitations and restrictions apply.

JAMBS

Single Unit

Double Unit

OPTIONS

* Ripped composite jambs will expose a rough, unfinished, edge. We do not recommend ripping tosize. Extenders from 3/8" to 2" can be applied to provide a more finished look.

Extend a 4 5/8" jamb from 5" to 6 5/8"

Extend a 5 1/4" jamb from 5 5/8" to 7 1/4"

Extend a 6 9/16" jamb from 6 15/16" to 8 9/16"

ADD this extender upcharge to the smooth or textured jamb needed.







OPTIONS

Single Double Sidelight

1 x 4 Primed FrameSaver (in lieu of WM180) ADD $32 $38 $38

1 x 4 Primed FrameSaver with WM180 ADD 67 81 81

1 x 4 PVC (in lieu of WM180) ADD 56 68 68

1 x 4 PVC with WM180 ADD 92 110 110

5/4 x 4 S4S FrameSaver Csg (in lieu of WM180) ADD 68 84 84

5/4 x 4 S4S FrameSaver with WM180 ADD 94 112 112

5/4 x 4 S4S PVC Csg (in lieu of WM180) ADD 88 116 116

5/4 x 4 S4S PVC Csg With WM180 ADD 160 198 198

PF Composite WM180 on FrmSvr frame ADD 34 42 42

No Casing DEDUCT 28 32 32

**Single Double Sidelight

Screw Type Adjustable Sill, Mill ADD $13 $27 included

Screw Type Adjustable Sill, Bronze ADD 24 46 $30

ZAC Self Adjusting Sill, Mill ADD 24 48 included

ZAC Self Adjusting Sill Bronze ADD 34 67 30

Open out Bumper Sill, Mill ADD 25 46 129

Open out Bumper Sill, Bronze ADD 36 66 156

1/2"ADA Sill, Mill (In or Out) ADD 6 14 51

1/2" ADA Sill, Bronze (In or Out) ADD 29 71 138

No Sill DEDUCT 17 45 na

** for sidelight units up to 1-2/3-0/1-2. (for larger sidelights see MISCELLANEOUS OPTIONS)

Standard Fixed Sill

ZAC Articulating Sill Open In ADA

Open Out Bumper Sill Open Out ADA

SILLS

Screw Type adjustable sill


CASING







OPTIONS

Single Double Sidelight

Deadbolt Bore ADD $10 $10 $10

Viewer Bore ADD 24 24 24

Non-removable-pin Hinge, primed ADD 6 10 6

Premium Hinges ( standard is primed) ADD 4 8 8

4" x 4" Stainless Steel Hinges ADD 25 50 25

4" x 4" SPRING hinges (2 per door) ADD 32 32

( SN -Satin Nickel, CB -Bronze, DC -Dull Chrome)

Premium finish NRP hinges - Special Order - ADD 20 40 20

Ball Bearing Hinges in 15 or 11P ADD 33 66 33

Door Only - No Frame , w/ hinges - 6-8 DEDUCT 160

Door Only - No Frame , w/ hinges - 8-0 DEDUCT 192

Cut down height - Fiberglass doors only ADD 130 260 310

For Wood Veneered Aluminum Push Bolt Astragal 6'8" 8'0"

Fir or Mahogany Veneer ADD 110 123

For the Multipoint Aluminum Astragal with Flip Lever

White ADD $329 $338Fir or Mahogany Veneer ADD 426 437

( Bright Brass, Dull Chrome, Antique Nickel, Satin Nickel, Antique Brass, or Colonial Bronze )

Some FiberGlass doors can be cut down in height. Limitations and restrictions apply. May void manufacturers warranty

MISCELLANEOUS OPTIONS

Astragal Options - for Steel and Fiberglass Units

Standard astragal for steel and fiberglass units is the Ultimate Push Bolt White Astragal

The Multi-Point features patent pending lock pawls activated by the deadbolt to engage keepers in the active door, providing three

locking points. No deflection.







OPTIONSFor the Trilennium Multi-Point Lock 6'8" 8'0"

for Steel and Fiberglass door units

Trilennium 3000 Multi-Point Lock - For Double UnitTo Steel or Fiberglass Door Unit of Choice : 6'8" 8'0"

Series 3000 -Multipoint Hardware, Stainless Steel face plate with Compatible White Aluminum Astragal ADD $791 $878

Series 3000 - Multipoint Hardware, Bronze face plate

with Compatible White Aluminum Astragal ADD $778 $865

Series 3000 -Multipoint Hardware, Stainless Steel face plate

with Compatible Fir/Mahogany Veneer Astragal ADD $916 $1,016

Series 3000 - Multipoint Hardware, Bronze face plate

with Compatible Fir/Mahogany Veneer Astragal ADD $903 $1,004

Trilennium 3000 Multi-Point Lock - For Single UnitTo Steel or Fiberglass Door Unit of Choice : 6'8" 8'0"

Series 3000 - Stainless Steel ADD $622 $704Series 3000 - Victorian Bronze ADD 609 692

A High Security Three-Point Lock System.See Section 13 for more information.

The interior and exterior trim, as well as matching strike plates are sold and shipped separately, to be

installed at the end of construction.

See Section 13 for Trillenium trim hardware







OPTIONS

20 Minute labels are available for our stock 6'8" 6 Panel Steel 4 Panel Steel 2 Panel Steel

Some special order Fiberglass doors are available for 20 minute labels.

20 Minute Label on stock* Steel Panel Door Units ADD: $466'8" stock steel doors only

20 Minute Label Fiberglass Panel Door Units -Special Order ADD: $175 6-8 doors

ADD: $212 8-0 doors


20 Minute Label - For Steel Panel Doors and Units

For other stock designs on interior 20 minute molded panel doors see Section 4 -INTERIOR DOOR UNITS

We are certified to machine and label components for 20 - 90 minute labels for authorized manufacturers' products. Please send in a request for a quote.

Not all fibeglass designs are available in 20 minute. Please check with our office for availability. Special Order 20 minute FiberGlass doors may have an exteneded lead time of 6 - 8 weeks. Pricing includes special

order and machining charges.







OPTIONS

SDL provides endless possibilities in divided light appearance for the Flush Glazed Fiberglass Doors. Some suggestions are shown below.

For rectangular designs only. SDL BARS - 1/4" x 7/8" bars - applied per light $36SDL BARS - 3/8" x 1-1/4" bars - applied per light $40SDL BARS - 1/4" x - 3-1/2" bars - applied per light $60SDL BARS - 1/4" x 5" bars - applied per light $85

7/8" smooth 1 1/8" smooth

Low profile for High profile for

flush glazed flush glazed

flush glazed


Simulated Divided Light (SDL) for Flush Glazed or Doors with Inserts*

SDL bars cannot be painted a dark color

For rectangular designs only.

*On doors with inserts, the glass inserts are installed in the doors before the SDL bars are applied. SDLbars may limit the removal of inserts.

1 1/8" textured 1 1/4" smooth

High profile for Flat for Direct

textured Flsh Glzd Glazed 1 light

3 1/2" Wide Bar or 5 1/2" Wide Bar

Smooth Flat for

Direct Glazed 1 light







OPTIONS

Packaged with

4-9/16" x 40" w/ 2 end caps $55.94 061-007

4-9/16" x 80" w/ 2 end caps 106.81 061-007

6-9/16" x 40" w/ 2 end caps 77.87 061-007

6-9/16" x 80" w/ 2 end caps 147.50 061-007

4-9/16" Extension Coupler 11.04 061-007

For longer length pan components and end caps see Section 10.


TSFM42F 5.5" x 3.5' Flat 12/ctn $13.85 ea piece 061-003

TSFM65 5.5" x 6.5' Roll 12/ctn 20.65 ea roll 061-003

See other SureSeal Flashing products in section 10.

SureSill - For added protection against water infiltration






STEEL and FIBERGLASS DOOR UNIT - Transoms

One light or Divided light with SDL bars

Paint Grade

SIZE LIGHT Price LIGHT with 7/8" SDL bar

2-0 x 1-0 1 239 2 $279 082-011

2-4 x 1-0 1 274 2 3142-6 x 1-0 1 274 2 3142-8 x 1-0 1 302 3 3623-0 x 1-0 1 309 2 3494-0 x 1-0 1 396 3 4565-0 x 1-0 1 477 2 5175-3 x 1-0 1 481 3 5415-4 x 1-0 1 481 4 5615-7 x 1-0 1 517 5 6176-0 x 1-0 1 524 5 624

For Primed transom frame : up to 6-9/16b: ADD $43For PF Composite transom frame : up to 4-9/16" ADD $64For PF Composite transom frame : up to 6-9/16" ADD 130

For PF TEXTURED Composite transom frame : up to 4-9/16" ADD 108For PF TEXTURED Composite transom frame : up to 6-9/16" ADD 239

See next page for custom size transom frames, glass, and sash.

For stock transom, sash only, pricing, see page 24 in section 4B.

Transoms

Specifications: Wood Transom Unit Frames -PRIMED Rabbeted jambs. 1-1/4" x 2" WM 180 All Purpose Brick Mould. 1-1/2" Transom mull. Insulated paint grade sash.

SDL Muiti-light

Stock Rectangular Transom Units with Clear Insulated Sash

Rough Opening height for Door Unit with Transom:

ADD:

Transom frame height, 1'1-1/2" (13-1/2") to

door unit rough opening.

One Light







up to:

2-8 x 2-0 $99 $162 $2063-0 x 2-0 99 162 2064-0 x 2-0 129 220 2705-0 x 2-0 144 246 2975-4 x 2-0 148 260 308

OPTIONS: 6-0 x 2-0 149 262 308For Jambs up to 6-9/16" : ADD $43 $67 $131


Add Glass price to Open Transom Frames aboveper Square Foot -LIST

3/16" Single Glass $21

Clear Isul Glass $36Low E Insul Glass $46

Example: Clear insulated glass for a 3'6" x 1'8" transom frame :

42 20 840 sq in144 5.8 sq ft

Rounded up to 6 sq ft $126Add to open transom frame above


Add Sash price to Open Transom Frames above


Paint Grade Sash

Fir, Stain Grade Sash

Wood transom sash with: per Square Foot -LIST1/8" Single Glass $61 $75Clear Isulated Glass $68 $78Low E Insul Glass $92 $105

Example: Glazed Transom Sash with insulated glass for a 3'0" x 1'2" transom frame :

36 14 504 sq in

144 3.5 sq ft

Rounded up to 4 sq ft $272Add to open transom frame above

Open Frames

Rectangular Transom Frames - open

PF TEXTURED Composite

All Prices are LIST.

Special Size Glazed Transom Sash - for Open Transom Frames

To price Glazed transom sash: width x height (inches), and divide by 144 =

Square feet of sash needed. Round that up to next whole number.

Multiply by Transom Sash square foot price.

Specifications: Wood Transom Unit Frames -Rabbeted jambs. 1-1/4" x 2" WM 180 All Purpose Brick Mould. 1-1/2" Transom mull. Stops furnished for transom sash.

PRIMEDPF

PRIMED Composite

To price glass: take width x height (inches), and divide by 144 = Square feet of glass

needed. Round that up to next whole number. Multiply

by glass square foot price.

Direct Set Glass - for Open Transom Frames

$21

$68







5' 4" Direct Glazed - 4 Lt -Spoke - For 1-0/3-0/1-0 Unit

O/S jamb to O/S jamb = 64-1/2" x 25-1/2"

4 9/16 " FJ Jambs - Primed WM180 Casing-

5' 0" Direct Glazed - 4 Light - For 5-0 (dbl 2-6) Uint

O/S jamb to O/S jamb = 62" x 16-1/2"

4 9/16 " Paint Grade or Clear Fir WM180 Casing- Primed Sill Nosing

A variety of transom designs and sizes are available by Special Order. Please send in your design and details for a quote.

SPECIAL ORDER TRANSOMS

Paint GradeStain Grade

Fir

SEGMENT TRANSOM UNIT

$1,690

082-040

$2,430

082-040

$1,710

Paint Grade

Paint grade

082-040

SEGMENT, ELLIPTICAL, & HALF CIRCLE TRANSOMS






Plastpro Trimmable Fiberglass Doors

Model LIST PRICEPrice for door only.

Full size Add door to frame from Section 4B..

DRG61T 36" x 80" Textured 6 Panel $506

DRS61T 36" x 80" Smooth 6 Panel $427Pricing for door only.

For standard door light / insert cut-out $60.00For shop trimming of door (within specs below) $80.00For door bottom sweep $10.79

Trim up to 1" from each composite stile, 1/2" from top rail and 1-1/2" from bottom rail to fit an existing

entryway without any reconstruction.

Ideal for fitting existing openings.






SPECIFICATIONS:

Center Hinged Side Hinged

w/ center mull w/ Astragal

SUGGESTED

ROUGH Outside jamb LIST PRICE

SIZE OPENING to outside jamb I LIGHT 15 LIGHT

CENTER HINGED SWING UNIT - 1 Door Fixed With 1" Mull Post5-0 x 6-8 2-door 60-5/16" x 80" 59-15/16" x 79-3/4" $1,332 $1,356

6-0 x 6-8 2-door 72-5/16" x 80" 71-15/16" x 79-3/4" $1,375 $1,399

DOUBLE SIDE HINGE UNIT - Both Doors Operating With Astragal A retrofit sized double unit with both doors operating, open in, with Ultimate Aluminum Astragal with H&F bolts.

5-0 x6-8 2-door 60-5/16" x 80" 59-17/32" x 79-3/4" $1,542 $1,566

6-0 x 6-8 2-door 72-5/16" x 80" 71-17/32" x 79-3/4" $1,585 $1,609

This ia a RH, Center Hinged, inswing, as viewed form outside.

SMOOTH FIBERGLASS -UNDERSIZED

Insulated Smooth Fiberglass, Center Swing Patio Door Unit in a Retrofit Size to use as a Replacement Unit or in New Construction.

Smooth Fiberglass door with one light or fifteen light insulated insert, 1-1/4" x 4-9/16" single rabetted FRAME

SAVER jambs,1-1/4" x 2" primed FJ WM 180 casing, compression weatherstrip, aluminum sill.






FIBERGLASS DOOR UNITS

Prefinished Mahogany Grained Textured Fiberglass4 Light SDL over Raised Panel

DOOR Only LIST PRICE

3-0 x 6-8 x1-3/4" 504 Textured Mahogany Fiberglass $1,508

UNIT LIST PRICE

Unit Price $1,734

See OPTIONS pages for different choices in jamb size, sills, hinges, etc.

Pre-Finished PREMIUM FIBERGLASS

Unit Specifications: FRAME SAVER Primed Frame with composite bottom, jambs. Q-Lon compression weatherstrip. 1-1/4" x 2" primed finger-jointed WM 180 Frame Saver Brick Mould. High-dam aluminum sill with vinyl threshold cap. 1-1/2pr. 4 x 4 hinges.







Western Reflections Decorative Glass Units

For other options see OPTIONS pages in this section. All prices are LIST.

St. Charles

Stainable Insert Frame

SteelSmooth

FiberglassTextured

Fiberglass

Insert Used

Insert Only Door Style Unit Size

STC-P 2248-SST $603 2/3 Lite 3-0 x 6-8 $1,009 $1,082 $1,126

STC-P 2248-SST 2/3 Lite 6-0 x 6-8 2,043 2,188 2,278

STC-P 0848-SST 318 2/3 Sidelite 1-0 or 1-2 x 6-8 697 773 858

STC-P 2264-SST 756 Full Lite 3-0 x 6-8 1,113 1,212 1,320

STC-P 2264-SST Full Lite 6-0 x 6-8 2,251 2,449 2,666

STC-P 2248-SST 2/3 Lite - 8-0** 3-0 x 8-0 1,207 1,386 1,479

STC-P 2248-SST 2/3 Lite - 8-0** 6-0 x 8-0 2,433 2,791 2,977

STC-P 2264-SST 3/4 Lite - 8-0 3-0 x 8-0 ns 1,678 1,911

STC-P 2264-SST 3/4 Lite - 8-0 6-0 x 8-0 ns 3,376 3,840 ** in Smooth FbrGls the 2/3 Lt 8-0 is stocked with a 1 or 2 panel bottom

Specifications: FRAME SAVER Frame - primed finger-jointed, with composite bottom jambs. Beige Q-Lon compression weatherstrip. 1-1/4" x 2" primed finger-jointed WM 180 Frame Saver Brick Mould. High-dam aluminum sill with vinyl threshold cap. 1-1/2 pair primed 4 x 4 hinges. Ultimate Aluminum astragal with head and foot bolts on doubles (Flip Lever on 8-0).

Clear Bevels with Clear SoftWave and Double Glue

Chip Glass. Patina Caming.

St. Charles







Western Reflections Decorative Glass Units

For other options see OPTIONS pages in this section. All prices are LIST.

Specifications: FRAME SAVER Frame - primed finger-jointed, with composite bottom jambs. Beige Q-Lon compression weatherstrip. 1-1/4" x 2" primed finger-jointed WM 180 Frame Saver Brick Mould. High-dam aluminum sill with vinyl threshold cap. 1-1/2 pair primed 4 x 4 hinges. Ultimate Aluminum astragal with head and foot bolts on doubles (Flip Lever on 8-0).

Heritage

Paintable Insert Frame

SteelSmooth

FiberglassTextured

Fiberglass

Insert Used

Insert Only Door Style Unit Size

HTG-PL 591 "D" $208 Sunburst/4Pnl 3-0 x 6-8 $585 653 $772

HTG-PL 2264 "D" $380 Full Lite 3-0 x 6-8 737 836 944

HTG-PL 2264 "D" $760 Full Lite 6-0 x 6-8 1,499 1,697 1,914

HTG-PL 2264 "D" $706 3/4 Lite - 8-0 3-0 x 8-0 939 1,649 1,882

HTG-PL 2264 "D" 3/4 Lite - 8-0 6-0 x 8-0 1,856 3,276 3,741"D" - Discontinued by Western Reflections. Subjet to stock on hand. Check with office for closeout pricing.

Clear Bevels with Clear

SoftWave and Clear

Renaissance Chip Glass. Platinum Caming.

Heritage





Section 5 Page 1 Effective:October, 2019

MAHOGANY Doors and Sidelights

LIST PRICE code

Door Only Single DoubleUnit* Unit*

3-0 x 6-8 x 1-3/4 2/3 Lite Mahogany $1,268 $1,765 $3,404 001-055

3-0 x 8-0 x 1-3/4 3/4 Lite Mahogany $1,602 $2,158 $4,188 001-055

Elegant Glass Doors and Entryways

A beautiful Mahogany door with raised moulding that enhances both the glass panel and the bottom raised panels. The insulated glass panel features the clear beveled Fleur de Lis surrounded by clear Waterglass. The outside boarder is a

clear Granite textured glass with an inner border of clear beveled panels, all with a Patina caming.

* Unit price with Mahogany 4-9/16 Jamb, brick mould, bronze sill. Doubleunit with basic mahogany Astragal.

See section 4B for pricing of Mahogany, Fir, or Primed frames as well as other frame options. for a complete unit.







6 Light with Clear Insulated LowE Beveled Glass

LIST PRICE5-0 x 8-0 6 Lt French Manor $3,457.55 001-055

Side 5080 mahogany 3-1/2" inside casing $324.24

For alternate Endura Mahogany Veneer Aluminum Ultimate Astragal: - Flip Ultimate Aluminum / Mahogany veneer astragal ADD $122.63

For Trilennium Multi-Point Lock* - installed ADD $1,003.55


French Manor Mahogany Door Unit

Unit Consist of: Pair of 2'-6" x 8'-0" x 1-3/4" TDL Segment Head Mahogany Doors with 7/8" muntins. Up to 6-9/16" Mahogany weather-stripped jambs with matching Brick Mold outside casing. Mahogany, weather-stripped T-Astragal, with Head & Foot Bolts. Set up

with Bronze adjustable sill, 4"x4" Bronze Hinges.

* The interior and exterior trim, as well as matching strike plates for the TrilenniumMultipoint are sold and shipped separately, to be installed at the end of construction.





Section 5 Page 3Effective:October, 2019


3'0" x 8'0" 3'6" x 8'0"

6 Light with Clear Insulated LowE Beveled Glass

LIST PRICE3-0 x 8-0 6 Lt Arch Top with 4-9/16" jamb* $2,213 001-055

3-6 x 8-0 6 Lt Arch Top with up to 6-9/16" jamb $2,602

For up to 6-9/19" jamb on 3-0 x 8-0 unit ADD $196

Side 3-0x8-0 Mahogany 3-1/2" inside casing $313Side 3-6x8-0 Mahogany 3-1/2" inside casing $313

For Bronze Trilennium Multi-Point Lock* - installed ADD $692


* The interior and exterior trim, as well as matching strike plates for the Trilennium Multipointare sold and shipped separately, to be installed at the end of construction.

Unit consist of: 3'-6" or 3'0" x 8'-0" x 1-3/4" TDL Segment Head Mahogany Door with with applied raised moulding on exterior side" Mahogany, weather-stripped, jambs with matching

Brick Mold outside casing. Set up with Bronze adjustable sill, 4"x4" Bronze Hinges

Arch Top Single - Mahogany Door Unit







1-3/4" MAHOGANY DOORS

504 506

Beveled LowE Insulated GlassLIST PRICE

Single DoubleDoor Only Unit* Unit*

504 - 4Lt Mahogany2-6 x 6-8 x 1-3/4" 4 Lite $1,080 $1,577 $3,028 001-055

2-8 x 6-8 x 1-3/4" 4 Lite 1,080 1,577 3,0283-0 x 6-8 x 1-3/4" 4 Lite 1,080 1,577 3,028

506 - 6Lt Mahogany2-6 x 8-0 x 1-3/4" 6 Lite $1,291 $1,788 $3,4502-8 x 8-0 x 1-3/4" 6 Lite 1,291 1,788 3,450 001-055

3-0 x 8-0 x 1-3/4" 6 Lite 1,291 1,788 3,450

6 Panel Mahogany3-0 x 6-8 x 1-3/4 6 PANEL $780 $1,277 $2,428 001-055

With Decorative Raised Moulding Surrounds on exterior side

* Unit price with Mahogany 4-9/16 Jamb, brick mould, bronze sill. Double unitwith basic mahogany Astragal.

See section 4B for pricing of Mahogany, Fir, or Primed frames as well as other frame options. for a complete unit.






1-3/4" Fir DoorsMODEL SIZE DESCRIPTION LIST PRICE

1-3/4" FIR Simpsom Performance Series with UltraBlock

Many of our stock Simpson Doors feature UltraBlock Technology.

What is UltraBlock Technology?Maximum protection against extreme weather conditionsComposite block material finger-jointed into the bottom of the stiles eliminates water infiltrationMinimizes stile and rail separationEliminates bottom rail and lower stile rotReduces buckling and swelling of bottom rail and lower stile componentsImproves warp resistanceBeautiful genuine woodFive year limited warranty

The stock doors with UltraBlock are indicated in the next pages.








List PriceSingle Double

7002 1Lt. Insulated Door Only Unit* Unit*w/ UltraBlock 1-6 X 6-8 X 1-3/4 * $516 $737 $1,550 001-050

2-0 X 6-8 X 1-3/4 * 565 786 1,6482-6 x 6-8 x 1-3/4 * 606 826 1,7292-8 x 6-8 x 1-3/4 * 606 826 1,7293-0 x 6-8 x 1-3/4 * 606 826 1,729

2-6 x 8-0 x 1-3/4 * $843 $1,157 $2,327 001-050

2-8 x 8-0 x 1-3/4 * 843 1,157 2,3273-0 x 8-0 x 1-3/4 * 843 1,157 2,327

* Unit price with Fir 4-9/16 Jamb,(5-1/4 on 8-0) brick mould, fixed mill sill.Double unit with basic Fir Astragal.

See section 4B for pricing of FrameSaver, Composite, or primed frames as well as other frame options for a complete unit.

1 Light Insulated

The 7002 doors, 2-0 to 3-0 widths,available with 5-1/2" stiles to

accommodate most hardware. The 1-6 wide has 4-1/2" stile.

These doors can be multi-light customized with Simulated Divided Light, SDL. See next

pages for more information.

* Nominal size - Doors are stocked prefit for units. 1/4" less in width, and 1" less in height.

* Doors withUltraBlock have

Simpson's unlimited 5 Year warranty. See the UltraBlock information on

this page.








* See the UltraBlock information on page 7.

List Price7501 1Lt. / Panel Single Double

w/ UltraBlock Insulated Door Only Unit* Unit*2-0 x 6-8 x 1-3/4 * $1,004 $1,224 $2,525 001-050

2-6 x 6-8 x 1-3/4 * 1,004 1,224 2,5252-8 x 6-8 x 1-3/4 * 1,004 1,224 2,5253-0 x 6-8 x 1-3/4 * 1,004 1,224 2,525

2-0 x 8-0 x 1-3/4 * $1,145 $1,459 $2,9317501 2-6 x 8-0 x 1-3/4 * 1,145 1,459 2,931

w/ UltraBlock 2-8 x 8-0 x 1-3/4 * 1,145 1,459 2,931Insulated 3-0 x 8-0 x 1-3/4 * 1,145 1,459 2,931


See section 4B for pricing of FrameSaver, Composite, or primed frames as well as other frame options. for a complete unit.

These doors can be customized with Simulated Divided Light, SDL. See next page.

1 Light Insulated / Raised Panel

Pricing for Doors and Sidelight Panels only. Add to frames in 4B for a complete unit.

The 7501 doors have 5-1/2" stiles to accommodate

most hardware.

* Nominal size - Doors are stocked prefit for units. 1/4" less in width, and 1" less in height.








Simulated Divided Light (SDL) for Fir Insulated Glass DoorsSDL provides endless possibilities in divided light appearance for the Insulated Glass Fir Doors. Some suggestions are shown below.

SDL BARS - 7/8" Fir SDL bars - applied. - Per Light $36SDL BARS - 1-3/8" Fir SDL bars - applied. - Per Light $40

7002 doors with SDL bars

7501 doors with SDL bars









504 4 Lt. / 1 Panel Door Only Unit* Unit*2-6 x 6-8 x 1-3/4 * $614 $835 $1,7462-8 x 6-8 x 1-3/4 * 614 835 1,7463-0 x 6-8 x 1-3/4 * 614 835 1,746

1802 2 Lt. / 1 Panel sidelight1-0 x 6-8 x 1-3/4 $4201-2 x 6-8 x 1-3/4 420

506 6 Lt. / 1 Panel2-6 x 6-8 x 1-3/4 * $614 $835 $1,7462-8 x 6-8 x 1-3/4 * 614 835 1,7463-0 x 6-8 x 1-3/4 * 614 835 1,746

1803 3 Lt. / 1 Panel sidelight1-0 x 6-8 x 1-3/4 $4201-2 x 6-8 x 1-3/4 420

4 & 6 Light over panel

6'8"



* Nominal size -Doors are stocked

prefit for units. 1/4" less in width,

and 1" less in height.









504 - 8' 4 Lt. / 1 Panel Door Only Unit* Unit*2-6 x 8-0 x 1-3/4 * $711 $1,025 $2,0642-8 x 8-0 x 1-3/4 * 711 1,025 2,0643-0 x 8-0 x 1-3/4 * 711 1,025 2,064

1802 - 8' S/L 2 Lt. / 1 Panel1-2 x 8-0 x 1-3/4 $582

506 - 8' 6 Lt. / 1 Panel2-6 x 8-0 x 1-3/4 * $711 $1,025 $2,0642-8 x 8-0 x 1-3/4 * 711 1,025 2,0643-0 x 8-0 x 1-3/4 * 711 1,025 2,064

1803 - 8' S/L 3 Lt. / 1 Panel1-2 x 8-0 x 1-3/4 $582




4 & 6 Light over panel

8'0"











1505 5 Lt. French Door Only Unit* Unit*1-6 X 6-8 X 1-3/4 * $618

1510 10 Lt. French2-0 X 6-8 X 1-3/4 * $506 $726 $1,529

1515 15 Lt. French2-6 x 6-8 x 1-3/4 * $543 $763 $1,6032-8 x 6-8 x 1-3/4 * 543 763 1,6033-0 x 6-8 x 1-3/4 * 543 763 1,603

1508 8 Lt. French2-0 X 6-8 X 1-3/4 * $422 $642 $1,3612-6 x 6-8 x 1-3/4 * 511 731 1,5392-8 x 6-8 x 1-3/4 * 511 731 1,5393-0 x 6-8 x 1-3/4 * 511 731 1,539

* Unit price with Fir 4-9/16 Jamb, brick mould, fixed mill sill. Double unit with basic FirAstragal.





Full Divided Light French








1-3/4" FIR CRAFTSMAN Series

6801 6801 6801 68011 Lt w/ 2Lt w/ 3Lt w/ 6Lt

SLD SLD SLD

1-3/4" CRAFTSMAN SERIES - Clear Select Fir with 3/4" VG Flat Panelsclear insulated glass. With UltraBlock construction for added protection.


6801 1 Lt IG / 2 Flat Pnl Door Only Unit* Unit*3-0 x 6-8 x 1-3/4 $1,274 $1,494 $3,065

6801 SDL / 2 Flat Pnl2Lt 3-0 x 6-8 x 1-3/4 $1,346 $1,566 $3,2093LT 3-0 x 6-8 x 1-3/4 1,382 1,602 3,2816LT 3-0 x 6-8 x 1-3/4 1,490 1,710 3,497













Fir Utility Doors and Sidelights

Panels are 3/4" thick, Split-proof, "engineered" panels.


944 9 Lt.sgl glz / 2 Panel Door Only Unit* Unit*2-8 x 6-8 x 1-3/4 $689 $909 $1,8953-0 x 6-8 x 1-3/4 689 909 1,895

7044 1 Lt. IG / 2 Panel2-8 x 6-8 x 1-3/4 $758 $979 $2,0343-0 x 6-8 x 1-3/4 758 979 2,034

1-3/8" Fir Side Lights1703 SSB 3Lt/Pnl 1-0 X 6-9 X 1-3/8 $355

1705 SSB 5Lt 1-0 X 6-9 X 1-3/8 3441702 IG 1Lt/Pnl 1-0 X 6-9 X 1-3/8 477

1701 IG 1Lt 1-0 X 6-9 X 1-3/8 501













1-3/4" FIR Exterior Traditiional Series


2130 Colonial 6 Panel Door Only Unit* Unit*3-0 x 8-0 x 1-3/4 $928 $1,149 $2,374

2-6 x 6-8 x 1-3/4 $663 $883 $1,8422-8 x 6-8 x 1-3/4 663 883 1,8423-0 x 6-8 x 1-3/4 663 883 1,8423-0 x 7-0 x 1-3/4 712 932 1,940

2044 Four Panel3-0 x 6-8 x 1-3/4 $712 $932 $1,941











1-3/4" EXTERIOR FLUSH DOORS

LISTDescription Size PRICE

BIRCH - SOLID CORE with 2-5/8" top & bottom wood rails2-0 x 6-8 x 1-3/4" 190.84$ BIRXS2-4 x 6-8 x 1-3/4" 194.892-6 x 6-8 x 1-3/4" 194.892-8 x 6-8 x 1-3/4" 199.753-0 x 6-8 x 1-3/4" 204.123-0 x 7-0 x 1-3/4" 287.23 BIRXS7

BIRCH - HOLLOW CORE with 2-1/4" top & bottom wood rails2-0 x 6-8 x 1-3/4" 139.16$ BIRX2-6 x 6-8 x 1-3/4" 146.122-8 x 6-8 x 1-3/4" 148.553-0 x 6-8 x 1-3/4" 153.41

1-3/8" LAUAN -SOLID CORE with 2-1/4" top & bottom wood rails2-8 x 6-8 x 1-3/8" 175.28$ LAUS

LAUAN -SOLID CORE with 2-1/4" top & bottom wood rails2-0 x 6-8 x 1-3/4" 149.82$ LAUXS2-4 x 6-8 x 1-3/4" 159.732-6 x 6-8 x 1-3/4" 159.732-8 x 6-8 x 1-3/4" 164.273-0 x 6-8 x 1-3/4" 168.483-0 x 7-0 x 1-3/4" 230.20 LAUXS7

LAUAN - HOLLOW CORE with 2-1/4" top & bottom wood rails2-0 x 6-8 x 1-3/4" 101.57$ LAUX2-4 x 6-8 x 1-3/4" 107.892-6 x 6-8 x 1-3/4" 107.892-8 x 6-8 x 1-3/4" 110.323-0 x 6-8 x 1-3/4" 115.18

See Section 4-b for Exterior frames in clear fir or paint-grade fingerjoint to make complete units.






1-3/4" EXTERIOR FLUSH DOORSSee Section 4-b for Exterior frames in clear fir or paint-grade fingerjoint to make

complete units.

INSERTS FOR FLUSH BIRCH OR LAUAN DOORS- Special Order Only

Description LIST PRICE Product code

Inserts Only20 x 24 - 1 Lt 1-3/4"

20 x 24 - 2 Lt 1-3/4" 6 x 10 1-3/4" 10 x 10 -1 Lt 1-3/4"

12 x 12 Louver 1-3/8"20 x 12 Louver 1-3/8"

Non-StockSpecial OrderOnly

Vision inserts are single glazed, with basswood

frames.

Louver inserts are made from basswood.

Louvers are chevron, v-slat, design.






Pet DoorsDescription Size LIST PRICE Product Code

PetSafe - Panel Pet Door Insert

Easy installation with no framing materials requiredPaint-ready and raised mould designDual flexible, tinted vinyl flapsInternal ribs add strength for everyday pet useWeather-resistance designLimited travel magnets for quick flap connectionPaintable finishing plugs includedFlap opening size10 1/8" W x 16 1/2" HSnap-on closing panel included

Two doors in one - dual-rise options of 8" or 10 1/2" **

May be installed lower in somedoors to create a lower rise.

24.53" x 3.54" x 27.72" Insert only 418.00$ Installation (for this insert only) 60.00

Cut out for other pet door - with customer 130.00$ supplied template

(Restrictions may apply, depending on door type, size, etc.)

Note:

** Approximate from opening to floor. Rise dimension depends on the bottom rail of the

steel, fiberglass, or wood door used.

Due to the variety of size and construction of some of the pet doors on the market, we will only install our stock pet door. We can

provide a cut out for other doors, only if a template, and location information are provided.

The PetSafe Panel Pet Door Insert compliments most 2'8", 2'10", and 3'0' steel and fiberglass doors with basic 6-panel, 4-panel, and 2-panel

designs. Customize flat doors, metal doors, fiberglass doors, wood doors or 22" x 36" glass top doors with a Paneled Pet Door Insert to

create a polished and professional look for today's home.






Pet Doors

This page blank for future use.






PlyGem VINYL SHUTTERS

********

Color samples are available from this office.

1 Pair/Ctn. LIST PRICE

15" wide 15" wide height 15" wide 15" wide

$56.00 na 25" na na

63.07 $78.11 31" $73.31 $97.95

65.89 82.98 35" 76.16 102.05

70.91 88.00 39" 81.66 114.40

71.42 91.10 43" 84.51 119.52

75.97 95.23 47" 89.95 143.14

80.19 99.74 51" 94.46 151.36

83.94 104.38 55" 98.75 154.43

88.54 113.98 59" 105.15 160.61

95.20 120.00 63" 113.31 167.81

102.18 130.40 67" 118.98 174.98

104.86 132.67 67" cottage na na

106.85 134.56 71" 122.14 183.20 Open

Louver 109.28 139.87 75" 124.42 192.45 Board & Batten

111.62 152.22 81" 128.67 205.79

Panel Closed

Board & Batten

PlyGem shutters add value and quality to any style home… at an affordable price.

Delivery in 1 to 2 weeks.Freight Prepaid

Special Order

High-pressure injection molded construction provides exceptional strength and durability.Available in Louvered, Raised Panel, Open or Closed Board & Batten, featuring the rich texture and Choose from 14 different lengths to fit a broad range of window openings.Add a distinctive look of elegance with available quarter radius and transom top shutter extensions.

Non-Stock - Special OrderDelivery in 1 to 2 weeks.

Available in 19 Classic Colors Black * Blackwatch Green * Brown * Coastal Blue * Dark Berry * Dark Navy * Dark Spruce * Green * Grey * Pebblestone Clay * Peppercorn * Red * Sand Dollar * Spanish Moss * Terra

Brown * Vineyard Red * White * Winstone

15" Wide, High-Density Copolymer Baked on

Acrylic Finish

Closed Board & Batten

Open Board & Batten

Louvered Raised Panel

per pair per pair





Blank





These custom made accordian doors come in a varity of series, with finishes, and sizes to meet the need form small residential applications to large commercial doors that can be used as room dividers.

Your Dyke Industries representative can help with your specifications to quote these products. See the WOODFOLD product brochure for more specifications.






Don

Typewritten Text


504-733-8500 / [email protected]:// NewOrleans.DykeDoors.com

Section 10 Page 1Effective: October, 2019

DOOR UNIT COMPONENTS - SILLS & ASTRAGALSModel Finish Length LIST PRICE Code

Size5-5/8" Z-Series Articulating Cap - Inswing - Single & Double

With Protective Sill Cover 1-3/8" high 5-5/8" wideDark Walnut threshold cap

ZAC-FN 5-5/8" MILL 29-7/8" 2-6 $45.02 061-011

ZAC-FN 5-5/8" MILL 31-7/8" 2-8 45.02ZAC-FN 5-5/8" MILL 35-7/8" 3-0 48.07ZAC-LFN 5-5/8" MILL 48-3/8" 4-0 100.85ZAC-FN 5-5/8" MILL 60-3/8" 5-0 100.85ZAC-FN 5-5/8" MILL 64-3/8" 5-4 100.85ZAC-FN 5-5/8" MILL 72-3/8" 6-0 107.98

ZAC-FN 5-5/8" BRZ 31-7/8" 2-8 $54.49 061-011

ZAC-FN 5-5/8" BRZ 35-7/8" 3-0 58.23ZAC-LFN 5-5/8" BRZ 48-3/8" 4-0 116.69ZAC-FN 5-5/8" BRZ 60-3/8" 5-0 120.51ZAC-FN 5-5/8" BRZ 60-7/8" For 5-0 French Manor 120.51ZAC-FN 5-5/8" BRZ 64-3/8" 5-4 120.51ZAC-FN 5-5/8" BRZ 72-3/8" 6-0 126.35

5-5/8" Z-Series Articulating Cap -Inswing - Continuous Sidelight

MZAC-FN 5-5/8" MILL 62-15/16" 1-0/3-0/1-0 $95.41 061-011

MZAC-FN 5-5/8" MILL 66-15/16" 1-2/3-0/1-2 101.38MZAC-FN 5-5/8" BRZ 66-15/16" 1-2/3-0/1-2 121.30

with sidelight seat

Application







SizeApplication

5-5/8" Z-Series Screw Type Adjustable Cap - Inswing

ZAI L-FN 5-5/8" MILL 31-15/16" 2-8 $35.95 061-011

ZAI L-FN 5-5/8" MILL 35-15/16" 3-0 38.01 ZAI L-FN 5-5/8" MILL 60-3/8" 5-0 81.20 ZAI L-FN 5-5/8" MILL 72-3/8 6-0 86.21

ZAI L-FN 5-5/8" BRZ 31-15/16" 2-8 $45.43ZAI L-FN 5-5/8" BRZ 35-15/16" 3-0 48.81 ZAI L-FN 5-5/8" BRZ 60-3/8" 5-0 100.85 ZAI L-FN 5-5/8" BRZ 72-3/8 6-0 106.12

Cut to order Z-Series Adjustable Cap Sills 24" - 35.5"ZAI L-FN 5-5/8" MILL $47.41ZAI L-FN 5-5/8" BRZ 58.36

specify exact opening size

5-5/8" Sill Base - No Caps - For use on units over 6-0 wide

ZAIL56DMF120NC Mill sill base 149" $158.94ZAIL56DBF120NC Brz sill base 149" 192.77

Sample Custom combinations

Sill for a Triple Unit - single swing door with two fixed, as sidelightsup to 3-0 / 3-0 / 3-0 oxo MILL $271.25 custom

up to 3-0 / 3-0 / 3-0 oxo BRZ 311.84 custom

Sill for a Quad Unit - double swing doors with two fixed, as sidelightsup to 3-0 / 6-0 / 3-0 oxxo MILL 292.19 custom

up to 3-0 / 6-0 / 3-0 oxxo BRZ 332.79 custom

Blank sill base for up to 12' units.

We add the sill caps, sidelight seats, and end gaskets to custom make up various size units

Sill base with 1ea 3-0 operating

cap and 2 fixed caps

Sill base with 1ea 6-0 operating

cap and 2 fixed caps







SizeApplication

5-5/8" Z-Series Fixed Open Out Bumper SillWith Protective Sill Cover 1-3/8" high 5-5/8" wide with 1/4" Horn

Dark Walnut threshold cap ZOB-FEN 5-5/8" MILL 39-15/16" 2-6 $47.23 061-011

ZOB-FEN 5-5/8" MILL 31-15/16" 2-8 47.23ZOB-FEN 5-5/8" MILL 35-15/16" 3-0 50.02ZOB-FN 5-5/8" MILL 48-3/8" 4-0 115.06ZOB-FN 5-5/8" MILL 60-3/8"" 5-0 101.88ZOB-FN 5-5/8" MILL 72-3/8" 6-0 105.58

ZOB-FEN 5-5/8" BRZ 29-15/16" 2-6 $56.71 061-011

ZOB-FEN 5-5/8" BRZ 31-15/16" 2-8 56.71ZOB-FEN 5-5/8" BRZ 35-15/16" 3-0 60.84ZOB-FN 5-5/8" BRZ 48-3/8"" 4-0 134.72ZOB-FN 5-5/8" BRZ 60-3/8"" 5-0 121.54ZOB-FN 5-5/8" BRZ 72-3/8" 6-0 125.49

5-5/8" Fixed Inswing High-Dam Sill with Vinyl CapWith Protective Sill Cover 1-3/8" high 5-5/8" wide

Brown vinyl threshold cap.HFI 5-5/8" MILL 31-15/16" 2-8 $23.68 061-011

HFI 5-5/8" MILL 35-15/16" 3-0 24.57HFI 5-5/8" MILL 48-3/8" 4-0 55.39HFI 5-5/8" MILL 60-3/8" 5-0 55.39HFI 5-5/8" MILL 72-3/8" 6-0 59.66







SizeApplication

4-5/8" Z-Series Fixed Open Out Bumper Sill Operating / Fixed

MZOB4565 4-5/8" MILL #REF! 61-13/16" $106.49MZOB4565 4-5/8" MILL 2-6/2-6 61-13/16" 106.49

4-5/8" Fixed Inswing High-Dam Sill with Vinyl Cap

HFI 4-5/8" MILL 31-15/16" 2-8 $26.07







SizeApplication

Sill Accessories

WALNUTZAC 3-0 Replacement Articulating Cap $14.20ZAC 6-0 Replacement Articulating Cap 31.66

ADJUSTABLE Screw SILL CAP 36.5" open in 11.58 ADJUSTABLE Screw SILL CAP 74" open in 24.89

SCREW HOLE PLUGS for Sill Caps 1.00

Fixed Door/Sidelite Seat 74-1/4" 48.90

Open Out Bumper Sill Cap 73" 77.05

Seat for Fixed Door/Sidelite Open Out ZOB sill 15.88

Replacement Cap for Fixed Sill 74" 14.59

XN 3/4" Sill Extender Mill 12' 37.70 XN -for 5-1/4" jambs XN 3/4" Sill Extender BRZ 12' 71.26

XW 2" Sill Extender Mill 12' 54.76 XW for 6-9/16" jambs XW 2" Sill Extender BRZ 12' 78.15

ZWO SXW 2" Extender 74" 77.19 Foam Outswing Extender (Inside cap). For use on FN sills only







SizeApplication

Sill Accessories

7-13/16 x 3-0 Sill Cover 5.00 for ZAC sills w/extenders

Mull Boots

For Standard sillsMULL BOOT Open In -WHITE 49B2B $5.73MULL BOOT Open Out -WHITE 43FBOS 9.35

MULL BOOT Open In -BROWN 49B2B 5.73 MULL BOOT Open Out -BROWN 43FBOS 9.35

PVC Door / Sidelight Stop

PVC STOP (fixed door/sidelight) 99" White 7.36 061-006

PVC STOP (fixed door/sidelight) 99" Textured Tan 15.55 018-081

Mull boots are use at the bottom of mull jambs to provide increased protection against rot.







SizeApplication

Z-Series ADA Compliant Inswing Sill

1/2" high 5-5/8" wideZHCI 5622T ADA 5-5/8 MILL 149-1/8" up to 3-0/6-0/3-0 $146.65ZHCI 5622T ADA 5-5/8 MILL 35 15/16" 3-0 30.70ZHCI 5622T ADA 5-5/8 MILL 73" 6-0 80.66 shop

ZHCI 5622T ADA 5-5/8 Brz 149-1/8" up to 3-0/6-0/3-0 ** 262.15ZHCI 5622T ADA 5-5/8 Brz 35 15/16" 3-0 53.33ZHCI 5622T ADA 5-5/8 Brz 73" 6-0 144.18 shop

Z-Series ADA Compliant Outswing Sill1/2" high 5-5/8" wide

ZHCO 5622T ADA 5-5/ MILL 149" up to 3-0/6-0/3-0 ** $154.85ZHCO 5622T ADA 5-5/ MILL 35 15/16" 3-0 46.45 shop

ZHCO 5622T ADA 5-5/ MILL 73" 6-0 92.91 shop

ZHCO 5622T ADA 5-5/ Brz 149" up to 3-0/6-0/3-0 ** $269.43ZHCO 5622T ADA 5-5/ Brz 35 15/16" 3-0 80.83 shop

ZHCO 5622T ADA 5-5/ Brz 72 3/8" 6-0 161.66 shop

** Add seats for fixed doors / sidelights (see below) on multiple units up to 12' wide.ADA Sill Accessories

ZHCI -ADA Fixed Seat - Open In 36" $32.66ZHCO -ADA Fixed Seat -Open Out 36" 34.30

ADA MULL BOOT Open In -BROWN 49ADA 6.35







SizeApplication

Attic Access Sill

DOORMAX ATTIC ACCESS -MILL 36" $24.13

For attic access units where the door opens into the finished space, the sill stays out of view.







SizeApplication

French Door Astragals Astragal

Endura Ultimate Aluminum Astragals

SLIDE BOLT MPA MULTIPOINT

TRILENNIUM COMPATABLE

White AluminumWhite,

& Wood Veneer onBronze Aluminum

White, & Wood Veneer onBronze Aluminum

For use with the Trilennium 3-Point Lock in a double door unit.







SizeApplication

French Door Astragals

Endura Ultimate Aluminum Astragals

Ultimate SLIDE BOLT White Astragal

Standard used for 6-8 Steel, Smooth or Textured Fiberglass units6-8 LH 79" White SlideBolt $122.346-8 RH 79" White SlideBolt 122.348-0 LH 95" White SlideBolt $150.958-0 RH 95" White SlideBolt 150.95

Ultimate Slide Bolt Mahogany Veneer AstragalsRecommended Option for 6-8 and 8-0 Mahogany units

6-8 LH 79" Mahog SlideBolt $211.946-8 RH 79" Mahog SlideBolt 211.948-0 LH 95" Mahog SlideBolt 251.588-0 RH 95" Mahog SlideBolt 251.58

Ultimate Slide Bolt Fir Veneer AstragalsRecommended Option for 6-8 and 8-0 Fir units

6-8 LH 79" Fir SlideBolt $211.946-8 RH 79" Fir SlideBolt 211.948-0 LH 95" Fir SlideBolt 251.588-0 RH 95" Fir SlideBolt 251.58

Lasting performance and strength in a clean and simple design.

SLIDE BOLT.







SizeApplication

French Door Astragals MULTIPOINT

Ultimate MULTIPOINT -FLIP LEVER-White Astragal for Steel Doors

6-8 LH 79" White FlipLever $411.016-8 RH 79" White FlipLever 411.018-0 LH 95" White FlipLever 438.768-0 RH 95" White FlipLever 438.76

Ultimate MULTIPOINT FLIP LEVER Mahogany Veneer Astragals

6-8 LH 79" Mahog FlipLever $508.676-8 RH 79" Mahog FlipLever 508.678-0 LH 95" Mahog FlipLever 547.468-0 RH 95" Mahog FlipLever 547.46

Ultimate MULTIPOINT FLIP LEVER Fir Veneer Astragals

6-8 LH 79" Fir FlipLever $508.676-8 RH 79" Fir FlipLever 508.678-0 LH 95" Fir FlipLever 547.468-0 RH 95" Fir FlipLever 547.46

Endura’s Ultimate Multi-Point Astragal combines all the features of the Ultimate Flip Lever™ Astragal with the added beneft of multi-point locking built right into the astragal.

Works with Standard Deadbolt Packages: No special hardware required.

Fights Deflection: Typical French door installations only hold the door panels together at one point the deadbolt. This permits door panel defection, and air and water infltration.

MPA's two additional locking points, prevent defection and resulting leaks.

Multi-Point Performance: With two additional locking points built into the astragal, MPA provides multi-point performance without requiring the added purchase of a multi-point lock,

delivering exceptional value and savings.







SizeApplication

French Door Astragals - Trilennium Compatible

Trilennium Compatible FLIP LEVER Astragals

Ultimate Trilennium Compatible FLIP LEVER White AstragalOption for 6-8 and 8-0 Steel, Smooth or Textured Fiberglass double units when the Trilennium Multipoint lock optiion is selected

6-8 LH 79" White FlipLever $266.24 ?

6-8 RH 79" White FlipLever 266.24 ?

8-0 LH 95" White FlipLever 299.74 ?

8-0 RH 95" White FlipLever 299.74 ?

Ultimate Trilennium Compatible FLIP LEVER Veneer Astragal Fir or Mahogany Veneer Option for 6-8 and 8-0 Steel, Smooth or Textured Fiberglass, or Mahogany Wood double units when the Trilennium Multipoint lock optiion is selected

?

6-8 LH 79" Fir or Mahog FlipLever $391.67 ?

6-8 RH 79" Fir or Mahog FlipLever 391.67 ?/

8-0 LH 95" Fir or Mahog FlipLever 437.83 ?

8-0 RH 95" Fir or Mahog FlipLever 437.83 ?

Astragal only. Does not include the Trilennium Multipoint lock.

This Astragal is used when using the Trilennium Muitipoint Lock hardware on a double door unit.See the Trilennium information in Section 13.

Fights Deflection at All Times: Trilennium bolts pre-engage even when the door is unlocked fghting defection at all times. Once locked, bolts work with the astragal's unique strike plates to pull both doors into perfect alignment.

Unmatched Multi-Point Security: The Ultimate Trilennium Astragal works with the Trilennium Multi-Point Locking System’s solid I-beam construction and three full deadbolts to deliver a high security system that cannot be matched.

Built to complement the unmatched strength of the Trilennium Multi-Point Lock, the Ultimate Trilennium Astragal delivers ultimate French door security and protection.






DOOR UNIT COMPONENTS - SILLS & ASTRAGALS

Model Finish Length Application LIST PRICE CodeSize Unit

French Door Astragals

Wood Astragal for Wood Exterior Doors - Fir

Standard on all Fir exterior units - does not include head & foot bolts6-8 with w/Strip only - 79" mortised for bolts $110.30 061-007

6-8 with w/Strip only - 80" 104.658-0 with w/Strip only - 95" mortised for bolts 125.448-0 with w/Strip only - 96" 118.34

Flip lever boltsHead/Foot Bolt 7" Brass $14.06 061-005

Head/Foot Bolt 7" Col. Bronze 14.06Head/Foot Bolt 7" Satin Nickel 14.06Head/Foot Bolt 18" Col. Bronze 34.94Head/Foot Bolt 18" Satin Nickel 34.94Head/Foot Bolt 18" Antique Nickel 34.94

Wood Astragal Boot Left $9.00Wood Astragal Boot Right 9.00

18" bolt 7" bolt






DOOR WEATHER SEALING and FLASHING Application LIST PRICE

Vinyl Door Bottom / Sweep

For Wood Doors with Adjustable (screw type), and Fixed Sills Staple on2-6 Brown Vinyl DBS-R Wood $5.792-8 Brown Vinyl DBS-R Wood 5.793-0 Brown Vinyl DBS-R Wood 6.464-0 Brown Vinyl DBS-R Wood 8.61

For Steel/FbrGlass Doors with Adjustable (screw type), and Fixed Sillsfor kerf bottom

2-8 Brown Vinyl Kerf DBK-R 32" STL/FG $5.003-0 Brown Vinyl Kerf DBK-R 36" STL/FG 5.374-0 Brown Vinyl Kerf DBK-R 48" STL/FG 7.81

For Wood Doors with ZAC Articulating Sill Staple on2-8 Brown Vinyl DBS-AC Wood $10.033-0 Brown Vinyl DBS-AC Wood 10.794-0 Brown Vinyl DBS-AC Wood 13.51

For Steel/FbrGlass Doors with ZAC Articulating Sill for kerf bottom2-0 Brown Vinyl Kerf DBK-AC 24" STL/FG $7.992-6 Brown Vinyl Kerf DBK-AC 30" STL/FG 7.992-8 Brown Vinyl Kerf DBK-AC 32" STL/FG 7.993-0 Brown Vinyl Kerf DBK-AC 36" STL/FG 8.44

Adjustable Replacement for Steel,FbrGls, or Wood Doors

3-0 Tan Vinyl Adjustable 36" $11.873-1 Tan Vinyl Adjustable 37" #REF!3-0 Brown Vinyl Adjustable 36" 11.87

Aluminum Door Sweep with notch and vinyl bottom adjustable

3-0 DB 003 -Z 36" Brite Brass $17.453-0 DB 003 -Z 36" Bronze 17.453-0 DB 003 -Z 36" Mill 11.54






DOOR WEATHER SEALING and FLASHING

WEATHERSTRIP

LIST PRICEQ-LON - QDS-650 Beige 81" 125/ctn $3.66Q-LON - QDS-650 Beige 97" 125/ctn 4.81Q-LON - QDS-650 Beige 37" 250/ctn 1.52

Q-LON - QDS-650 Bronze 81" 125/ctn $3.66Q-LON - QDS-650 Bronze 97" 125/ctn 4.81Q-LON - QDS-650 Bronze 37" 250/ctn 1.52

Q-LON - QDS-650 White 81" 125/ctn $4.14Q-LON - QDS-650 White 97" 125/ctn 4.81

Extra Reach WeatherstripQ-LON - QEBD-825 Beige 97" 100/ctn $8.40Q-LON - QEBD-825 Bronze 97" 100/ctn 8.54

Solution Corner Seal Beige 2" 2000/ctn $1.00Solution Corner Seal Bronze 2" 2000/ctn 1.00Solution Corner Seal White 2" 2000/ctn 1.00







SureSill Sill Pan Kitsships with

4-9/16" x 40" w/ 2 end caps $55.944-9/16" x 80" w/ 2 end caps 106.816-9/16" x 40" w/ 2 end caps 77.876-9/16" x 80" w/ 2 end caps 147.50

4-9/16" Extension Coupler $11.04

Key Features:* Durable synthetic construction * Sloped surface* Effective for both windows and doors * Integral drainage feature* Cuttable to desired length * Cost effective* Lock-in end caps with keyed profile design *Longer lengths with Extension Coupler.

Designed to prevent water infiltration and limit builder liability, the SureSill sill pan provides an effective and durable integrated drainage systemwith a recessed slope and horizontal surface

along the entire length of the door.

The SureSill is designed to be cut on the job to fit the rough opening. Specially designed end caps should be installed with PVC cement, allowing for an exact fit. The PVC cement creates

a chemical bond that is impentetrable by water, creating a water tight seal.




504-733-8500 / 800-229-3953fAX [email protected]

Section 10 Page 17Effective: April 11, 2018



Model Finish Length LIST PRICEApplication

SureSill Sill Pan KitsPackaged with

4-9/16" x 40" w/ 2 end caps and PVC cement 63.44




4-9/16" Extension Coupler 11.69

Key Features:

* Durable synthetic construction * Sloped surface

* Effective for both windows and doors * Integral drainage feature

* Cuttable to desired length * Cost effective

* Lock-in end caps with keyed profile design *Longer lengths with Extension Coupler.

Designed to prevent water infiltration and limit builder liability, the SureSill sill pan provides an effective and durable integrated drainage system with a recessed slope and horizontal surface along the entire length of the

door or window.

The SureSill is designed to be cut on the job to fit the rough opening. Specially designed end caps are installed with PVC cement, allowing for an exact fit. The PVC cement creates a chemical bond that is impentetrable by

water, creating a water tight seal.



504-733-8500 / 800-229-3953fAX [email protected]

Section 10 Page 18Effective: April 11, 2018



Model Finish Length LIST PRICEApplication

BLANK



504-733-8500 800-229-3953Fax [email protected]

Section 10 page 19Effective: March 10, 2018


Cofair Products Waterproof Flashing

Tite Seal Self-Adhesive Waterproof Flashing per roll

Model Width Length Roll or Flat Pieces/Case LIST PRICE Code

TS433 4" 33' Roll 18 $18.00TS633 6" 33' Roll 12 26.59TSU4100 4" 100' Roll 9 41.61TSU6100 6" 100' Roll 6 62.42

Tite Seal Flexible Self-Adhesive Waterproof Flashin per roll

TSF425 4" 25' Roll 18 $36.33


TSFM42F 5.5" 3.5' Flat 12 $14.37TSFM65 5.5" 6.5' Roll 12 21.30



504-733-8500 800-229-3953Fax [email protected]

Section 10 page 20Effective: March 10, 2018


This page is blank for future use.




Section 11 page 1 Effective: Ocober 3, 2019

CLEAR FIR, PINE, & PRIMED FINGER-JOINTED

MOULDINGS



http://www.dykeind.com



MOULDINGS

CLEAR FIR PINE & PRIMED FINGER-JOINTED

#






MOULDINGS

PRIMED MDF

4 X 8 BOARDS - MDF & BIRCH






MOULDINGS

Pattern Number Description SIZE

CLEAR Lineal Mouldings Clear Mouldings are stocked in Random Lengths 6' - 16'

For Specified Lengths ( if available) ADD 15%

(Hem-Fir - Unless otherwise specified)

per hundred lineal ft.

WM 47 Fir Crown 11/16 x 4-5/8 $356.40 /clf 031-002

WM 100 Fir Cove 11/16 x 11/16 71.80 /clf 031-002

WM 106 Fir Qtr. Round 11/16 x 11/16 71.80 /clf 031-002

WM 108 Fir Qtr. Round 1/2 x 1/2 46.20 /clf 031-002

WM 129 Fir Base Shoe 7/16 x 11/16 55.80 /clf 031-002

WM 148 Fir Glass Bead 3/8 x 3/8 65.70 /clf 031-002

WM 180 Fir A P Casing 1-1/4 x 2 244.20 /clf 031-002

WM 205 Fir Outside Corner 1-1/8 x 1-1/8 x 8',12',16' 148.50 /clf 031-002

WM 206 Fir Outside Corner 11/16 x 11/16 77.20 /clf 031-002

WM 231 Pine Wall Rail 1-1/2 x 1-11/16 363.00 /clf 031-001

WM 233 Pine Full Round 1-5/16 257.40 /clf 031-002

WM 267 Fir Lattice 1/4 x 1-3/8 62.70 /clf 031-002

FLUTED INT Fir Casing 11/16 x 3-1/4 248.20 /clf 031-002

C-11 Fir Casing 7/8 x 3-1/4 231.00 /clf 031-002

WM 324 Fir Casing 11/16 x 2-1/4 138.60 /clf 031-002

WM 356 Fir Casing 11/16 x 2-1/4 138.60 /clf 031-002

B-11 Fir Base 5/8 x 5-1/4 438.90 /clf 031-012

WM 623 Fir Base 9/16 x 3-1/4 198.00 /clf 031-002

WM 713 Fir Base 9/16 x 3-1/4 198.00 /clf 031-002

S4S Stop Fir Door Stop 3/8 x 1-1/4 53.60 /clf 031-002

WM 1021 Fir Flat Stool 11/16 x 6-1/4 685.80 /clf 031-002






MOULDINGS


CLEAR CUT TO LENGTH MOULDINGS

Hem-Fir - Unless otherwise specified)

WM 180 -7' A P Casing 1-1/4 X 2 X 83" mitered $19.40 /pc

WM 324 -7' Casing 11/16 x 2-1/4 x 7' 10.34 /pc 031-023

WM 356 -7' Casing 11/16 x 2-1/4 x 7' 10.34 /pc 031-023

C-11 -7' Casing 7/8 x 3-1/4 x 7'4" 17.66 /pc 031-023

S4S STOP -7' Stop 3/8 x 1-1/4 x 7' 6.26 /pc 031-023

CLEAR PINE ASTRAGALS - for interior use

1300 W Pine 7' Astragal 1-3/4" doors $64.02 ea 031-001

1300 W Pine 8' Astragal 1-3/4" doors $68.40 ea

1305 W Pine 7' astragal 1-3/8" doors 48.90 ea 031-001

1305 W Pine 8' astragal 1-3/8" doors 56.60 ea 031-001

1305 W Pine 7' astragal 1-3/8" drs w/head bolt mortise* 54.80 ea 031-001

1305 W Pine 8' astragal 1-3/8" drs w/head bolt mortise* 62.90 ea 031-001

1300 W 1305 W

for 1-3/4" doors for 1-3/8" doors

See Section 10 for Flush bolts.

See Section 10 for Fir astragals for 1-3/4" doors, kerfed for weatherstrip.

* Mortised for 7" head or foot bolt.







LINEAL PRIMED MOULDINGS

Stocked, and sold, in 16' lengths, except as noted per hundred lineal ft.

WM 47 Crown 11/16 x 4-5/8 $210.90 /clf 031-012

LWM 51 Crown 9/16 x 3-1/4 135.10 /clf 031-012

D 514 Crown 11/16 x 5-1/4 303.00 /clf 031-012

WM 106 Quarter Round 11/16 x 11/16 57.80 /clf 031-012

WM 129 Shoe 7/16 x 11/16 36.30 /clf 031-012

WM 163 Base Cap 11/16 x 1-3/8 75.80 /clf 031-012

WM 273 Picture Mould 11/16 x 1-3/4 83.60 /clf 031-012

WM 297 Chair Rail 21/32 x 2-21/32 130.20 /clf 031-012

WM 324 Casing* 11/16 x 2-1/4 89.70 /clf 031-012

WM 356 Casing* 11/16 x 2-1/4 14' 89.70 /clf 031-012

C-11 Casing* 7/8 x 3-1/4 17' 128.50 /clf 031-012

C-12 Casing* 1-1/4 x 4 17' 280.00 /clf 031-012

C-24 Casing* 1-1/8 x 3-1/4 17' 242.80 /clf 031-012

RB-3 Casing* 1 x 3-1/2 17' 248.80 /clf 031-012

3-1/4 Fluted Casing 3/4 x 3-1/4 149.50 /clf 031-012

WM 180 Brick Mld Casing 1-1/4 x 2 154.90 /clf 031-012

WM 351 Base 9/16 x 3-1/4 128.50 /clf 031-012

WM 623 Base 9/16 x 3-1/4 128.50 /clf 031-012

WM 713 Base 9/16 x 3-1/4 128.50 /clf 031-012

LWM 445 Base 9/16 x 3-1/4 128.50 /clf 031-012

B-10 Base 5/8 x 4-1/4 219.70 /clf 031-012

B-11 Base (New Orleans) 5/8 x 5-1/4 292.90 /clf 031-012

5180 Base 9/16 x 5-1/4 280.00 /clf 031-012

B-14 Base 11/16 x 7-1/4 376.20 /clf 031-012

Stop Door Stop* 11/32 x 1-7/32 62.40 /clf 031-012

WM 1021-5-1/4 Flat Stool 11/16 x 5-1/4 303.00 /clf 031-012

WM 1021 -6-1/4 Flat Stool 11/16 x 6-1/4 345.70 /clf 031-012

FLUTED EXT 1 Fluted/Beaded 1 x 4 327.20 /clf 031-012

FLUTED EXT 2 Fluted Casing 1 x 5-1/4 510.40 /clf 031-012

* Also stocked in precut door unit lengths. See next page.

MOULDINGS







MOULDINGS

PRIMED CUT TO LENGTH MOULDINGS

WM 356 -7 Casing 11/16 x 2-1/4 x 7' 7'0" $5.04 /pc 031-012

WM 324 -7 Casing 11/16 x 2-1/4 x 7' 7'0" 10.34 /pc 031-012

C-11 - 7 Casing 7/8 x 3-1/4 x 7'4" 8'6" 17.66 /pc 031-023

C-11 - 8 Casing 7/8 x 3-1/4 x 8'6" 8'6" 9.42 /pc 031-023

C-12 - 8 Casing 1-1/4" x 4" x 8-6" 8'6" 22.50 /pc 031-023

C-24 -8 Casing 1-1/8 x 3-1/4x8'6" 8'6" 21.38 /pc 031-023

RB-3 -8 Casing 1 x 3-1/2 x 8'6" 8'6" 23.92 /pc 031-012

S4S STOP -7 Stop 11/32 x 1-7/32 80-9/16" 3.68 /pc 031-012

S4S STOP - 8 Stop 11/32 x 1-7/32 96-9/16" 4.60 /pc 031-012

WM 180 -7 AP Csg 1-1/4 x 2 (mitered L/R) 6'11" 10.69 /pc 018-070

WM 180 -7 FrmSvr AP Csg 1-1/4 x 2 (mitered L/R) 6'11" 15.52 /pc 018-070

WM 180 -8 FrmSvr AP Csg 1-1/4 x 2 (mitered L/R) 8'3" 20.29 /pc

WM 180 -10 FrmSvr AP Csg 1-1/4 x 2 10'0" 23.99 /pc 018-070







MOULDINGS

MDF MOULDINGS Stocked and Sold in 16' lengths, except as noted. per hundred lineal ft.

MDF 51 Crown 9/16" X 3-1/4" X 16' $85.90 /clf 031-014

MDF 47 Crown 9/16" X 4-5/8" X 16' 116.50 /clf 031-014

MDF 44 Crown 5/8" X 5-1/4" X 16' 139.50 /clf 031-014

MDF 329 Crown /Cove 1-3/32" X 6-5/16" X 16' 389.90 /clf 031-014

MDF 7 Crown 11/16" X 7" X 16' 209.90 /clf 031-014

MDF 505 Cove 1" X 7" X 16' 331.20 /clf 031-014

MDF 513 Crown /Cove 1-1/8" x 8" X 16' 458.90 /clf 031-014

MDF 519 Cove / Crown 11/16" X 4-1/4" X 16' 209.90 /clf 031-014

MDF 562 Crown 1-1/4" X 7-1/4" X 16' 488.00 /clf 031-014

MDF 388 Backer 1/2" X 5-1/2" X 16' 124.10 /clf 031-014

MDF 391 Chair Rail 15/16" X 3-1/2" X 16' 193.70 /clf 031-014

MD623 Base 9/16" X 3-1/4" X 16' 86.50 /clf 031-014

MDF B-10 Base/Enhancer 5/8" X 4-3/8" X 16' 119.50 /clf 031-014

MDF5 Base 9/16" X 5-1/4" X 16' 133.10 /clf 031-014

MDF7 Base 9/16" X 7-1/4" X 16' 181.70 /clf 031-014

MDF9 Base 3/4" X 8-3/4 X 16' 302.20 /clf 031-014

MDF 312 Base 11/16" X 11-1/4" X 16' 333.10 /clf 031-014

MDF 1x12 S4S Board 11/16" X 11-1/4" X 16' 298.20 /clf 031-014

Primed MDF Nickle Gap T & G Ship Lap

MDF Nickle Gap Ship Lap 11/16" X 5-1/4" X 16' $144.00 /clf 031-014

Primed Moisture Resistant MDF Window StoolStandard Profile

MDF Stool- 5-1/4 11/16" X 5-1/4" X 16' $217.80 /clf 031-014

MDF Stool - 6-1/4 11/16" X 6-1/4" X 16' 248.80 /clf 031-014

MDF Stool - 8-1/4 11/16" X 9-1/4" X 16' 326.30 /clf 031-014

High Profile

MDF HP Stool- 6-1/4 1-1/16" x 6-1/4" x 16' $358.20 /clf 031-014

MDF HP Stool- 8-1/4 1-1/16" x 8-1/4" x 16' 486.00 /clf 031-014

1-1/16" High Profile11/16" Standard Profile





Section 11 page 9 Effective: October 18, 2019


MOULDINGS

4 X 8 BOARDS - MDF & BIRCHMDF 4X8 4' x 8' x 3/4" (unprimed) $83.90 /pc 035-011

BIRCH 4 X 8 4' x 8' x 3/4" 127.00 /pc 035-005

COMPOSITE BRICK MOULD - PlastPro PF - PRIMED

WM-180 Lineal 1-1/4" X 2" X 17' $316.48 /clf 018-080

WM-180 6'8" Mitered Leg 1-1/4" X 2" 6'11" 23.59 /pc 018-080


WM-180 3'0" Mitered Head 1-1/4" X 2" 10.86 /pc 018-080

COMPOSITE BRICK MOULD - PlastPro PF - Tan Textured

WM-180 Lineal 1-1/4" X 2" X 17' $338.56 /clf 018-081


WHITE PVC S4S(stocked in 18' lengths)

5/4 x 4 S4S PVC $594.20 /clf 032-001

1 x 4 S4S PVC 438.20 /clf 024-005

1 x 6 S4S PVC 797.00 /clf 024-005

TREATED SYP MOULDINGS

WM180 AP Casing 1-1/4" X 2" $414.00 /clf 031-011

WM 188 1-1/16" X 1-5/8" 414.00 /clf 031-011

MAHOGANY

C-11 -9' Mahogany (Sapele) 7/8" X 3-1/4" X 108" $117.37 /pc 031-027

1 x 4 S4S 8'4" 11/16" x 3-1/2" 54.34 /pc 018-055

WM180 AP Casing 9' 1-1/4" X 2" 50.90 /pc 018-055

Astragal 1-3/4 for 6'8" 94.19 /pc 018-055

Astragal 1-3/4 for 8'0" 144.90 /pc 018-055






MOULDINGS

Pattern Number Description SIZE LIST PRICE

SIDES OF CASING per side

One Side = 2 legs and 1 header.

width x height, up to --

WM 324- 2-1/4" Clear Fir 3-0 x 6-8 $31.10 /ea

WM 324- 2-1/4" Clear Fir 6-0 x 6-8 37.30 /ea

WM 356- 2-1/4" Clear Fir 3-0 x 6-8 31.10 /ea

WM 356- 2-1/4" Clear Fir 6-0 x 6-8 37.30 /ea

C-11- 3-1/4" Clear Fir 3-0 x 6-8 53.00 /ea

C-11- 3-1/4" Clear Fir 6-0 x 6-8 63.60 /ea

WM 324- 2-1/4" Primed 3-0 x 6-8 31.10 /ea

WM 324- 2-1/4" Primed 6-0 x 6-8 37.30 /ea

WM 356- 2-1/4" Primed 3-0 x 6-8 15.20 /ea

WM 356- 2-1/4" Primed 6-0 x 6-8 18.20 /ea

C-11- 3-1/4" Primed 3-0 x 6-8 53.00 /ea

C-11- 3-1/4" Primed 6-0 x 6-8 63.60 /ea

C-11- 3-1/4" Primed 3-0 x 8-0 28.30 /ea

C-11- 3-1/4" Primed 6-0 x 8-0 34.00 /ea

C-24 - 3-1/4" Primed 3-0 x 6-8 64.20 /ea

C-24 - 3-1/4" Primed 6-0 x 6-8 77.00 /ea

C-24 - 3-1/4" Primed 3-0 x 8-0 64.20 /ea

C-24 - 3-1/4" Primed 6-0 x 8-0 77.00 /ea

C-12 - 4-1/4" Primed 3-0 x 6-8 67.50 /ea

C-12 - 4-1/4" Primed 6-0 x 6-8 81.00 /ea

C-12 - 4-1/4" Primed 3-0 x 8-0 72.50 /ea

C-12 - 4-1/4" Primed 6-0 x 8-0 87.00 /ea






MOULDINGS

Pattern Number Description SIZE LIST PRICE

SIDES OF FLUTED CASING

One Side = 2 legs and 1 header.

3-1/4 FLUTED Clear Fir 3-0 x 6-8 $55.90 /ea

6-0 x 6-8 68.30 /ea

3-1/4 FLUTED Primed 3-0 x 6-8 $34.20 /ea

6-0 x 6-8 41.80 /ea

4" FLUTED Primed 3-0 x 6-8 $73.60 /ea

6-0 x 6-8 90.00 /ea

5-1/4" FLUTED Primed 3-0 x 6-8 $114.80 /ea

6-0 x 6-8 140.30 /ea

BULLSEYE CORNER AND PLINTH BLOCKS

ROSETTE Pine 7/8 X 3-1/2 X 3-1/2 $12.58 /pc 031-001

ROSETTE Pine 1-1/8 x 4-1/4 x 4-1/4 12.80 /pc 031-001

ROSETTE Pine 1-1/8 x 5-1/2 x 5-1/2 16.10 /pc 031-001

PLINTH BLOCK Pine 1 1/8 x 3-1/2 x 6 13.88 /pc 031-001

PLINTH BLOCK Pine 7/8 x 3-1/2 x 8 15.36 /pc 031-001

PLINTH BLOCK Pine 1-1/8 x 4-1/4 x 7-1/2 17.58 /pc 031-001

PLINTH BLOCK Pine 1-1/8 x 5-1/2 x 8 21.24 /pc 031-001






MOULDINGS

Pattern Number SIZE LIST PRICE

Flexible Mouldings

Stock Items

1/2 Circle Casing

DK-325 C-11 36" (18" radius) 1/2 round $88.60 /pc 031-016

DK-325 C-11 48" (24" radius) 1/2 round 110.20 /pc 031-016

Casing for Small Eyebrow

DYKENO C-11 32" X 6" RISE FLEX EYEBROW $112.00 /pc 031-016

DYKENO C-11 36" X 6" RISE FLEX EYEBROW 112.00 /pc 031-016

DYKENO C-11 48" X 6" RISE FLEX EYEBROW 132.00 /pc 031-016

Straight Mouldings

DYKENO B-11 FLEX 5/8 x 5-1/4 BASE $228.00 /pc 031-016

DYKENO B-10 FLEX 5/8 X 4-1/4 BASE 324.00 /pc 031-016

DYKENO B-14 FLEX 11/16 X 7-1/4 BASE 404.00 /pc 031-016

T-WM 1x6x12' S4S FLEX 3/4 X 5-1/2 FLAT STOCK 345.40 /pc 031-016

DYKENO WM129 FLEX SHOE 7/16 X 11/16 SHOE 57.00 /pc 031-016

DYKENO WM163 FLEX CAP 11/16 X 1-3/8 BASE CAP 82.20 /pc 031-016

DYKENO WM100 FLEX COVE 3/4" x 3/4" COVE 56.30 /pc 031-016

Flexible Mouldings - Special Shapes

Casing for Half Rounds, Arches, and Ellipticals, as well as Crowns for Curved Walls

Flexible moulding is easier to work with, generally faster and more economical, than rigid wood moulding, when applied to special shapes . Even though there is

flexibility in movement it should not be bent past a certain tolerance for best results,. It must be pre-formed during manufacture to better fit the shapes it is applied to.

PLEASE SEE NEXT PAGES FOR SPECIAL ORDERING INFORMATION.






MOULDINGS


Flexible Mouldings - Ordering Information

Ordering for a Half-Round

##

##

##

##

Ordering for an Arc or Eyebrow

Ordering for an Elliptical or an Oval

The sizes for half rounds are based on the DIAMETER (2x the radius) of the inside jamb width - per the below diagram. For example, a "2/0" half round will have a diameter of approximately 24". For a true half circle (half round) part, the radius (or rise) will be half of the diameter. The flexibility of our material allows us to offer 6 standard half round sizes that cover a range of widths from 1/8 (20") to 7/0 (84").

Material Length Required for Half Round (in feet) = Diameter/2 (Radius) + Casing width x Pi (3.146) / 12

Please refer to the detailed installation and finishing instructions provided in each box of material.

For arched door entries/openings ,the key measurements we need are:

1) Width of opening (inside jamb)

2) Rise (Do not include leg height)

** TEMPLATES ARE NOT REQUIRED IF IT IS A TRUE RADIUS OPENING.

Material Length Required for Arc (in feet) = Rise x 3 + Width (both in inches) / 12

Continued on next page

Casing for elliptical and oval applications must be pre-bent at our factory.

**Templates are required for ellipticals or ovals.

NOTE: There are limitations regarding how tight a radius can be created (a general "rule of thumb" is approximately 3x the width of the profile) so please contact our sales department if you have a tight radius application.






MOULDINGS


Flexible Mouldings - Ordering InformationOrdering Crown

Calculating the radius

*A template may be required if there are multiple radii.

2. How is the crown being installed? Identify the top (the part against the ceiling) and the bottom (thepart against the wall) of the profile.

3. The radius of the wall and/or ceiling – please use the below diagrams if you are not sure how tocalculate the radius.

Crown moulding is generally the most complicated product to order due to how it is mounted. Crown moulding normally needs to be pre-bent during production so please specify the following when placing an order:

Please refer to the detailed installation and finishing instructions provided in each box of material.

1. Whether it is a Convex (Outside Radius or "OSR") or Concave (Inside Radius or "ISR")application – see below pictures. IMPORTANT: Please specify clearly if the crown is being usedfor a dormer application or a Tudor style (ski slope) roof.

-If it is a true radius application, the radius can be determined by providing the WIDTH and RISE(similar to an arc). Please provide the “A,” “B,” and “C” dimensions (as shown here) and we cancalculate the radius.






MOULDINGS


Door and Window Pediment Head

For Interior Use

Interior Pediment Head - order by Face Width For interior door units the face width should equal the outside casing

measurement of the door unit below.

LIST PRICE LIST PRICE

face width with 1x6 face with 1x8 face

Pediment Head up to 32" $61 $66

ea. up to 44" $75 $80

up to 56" $88 $95up to 80" $111 $121

per hundred lf

Pediment Cap Moulding - Poplar 1-1/8" x 2" x random $465.00 031-010

Pediment Bullnose Moulding -Poplar 1/2" x 1-1/8" x random $180.00 031-010

Shipped lose, not applied to door unit.






MOULDINGS


blank





Section 12 Page 1Effective: Aug 27, 2019

STAIR PARTS

Dyke Industries stocks an extensive selection of stairparts.

Our stair parts, from Fitts Industries, and Creative Stair Parts by Southwest Moulding,

are stocked in oak, with many of the balusters in primed.

Please use the Fitts Industries Stair Parts or the Creative stair Parts catalogs for the selection of parts, and as a very useful

guide in determining what parts should be used in different applications.

Most stair systems are subject to local building codes that may require compliance with regards to rail height, rail size and profile, baluster spacing,

stair width, clearance and, tread rise and run. While Dyke Industries can offer help in compliance we cannot be responsible for the selection of parts

and/or their installation.

Most of our treads, railing, and fittings are stocked in Red Oak. Please check with our office for the availability of parts in White Oak, as well as Beech, Maple, Hemlock, Cherry, and Pine.






STAIR PARTS






STAIR PARTS

Starting Steps

Item Number Description List Price

8010 -48" Starting Step -Single OAK $301.13

8010 -60" Starting Step -Single OAK 372.83

8010-2 False End Starting Cap OAK 118.46

8015 42/48" Starting Step -Adjustable Double OAK 363.45

8015 54/60" Starting Step -Adjustable Double OAK 442.80

8010 Kit Cove and Shoe Set OAK 43.05

8015 & 8650 can be special ordered for a specified stair width.






STAIR PARTS

Treads, Risers, & Tread Caps

Item Number Description List Price Code

8070 36" Plain Tread - 11-1/2" OAK $42.95

8070 42" Plain Tread - 11-1/2" OAK 53.65

8070 48" Plain Tread - 11-1/2" OAK 62.69

8070 54" Plain Tread - 11-1/2" OAK 70.83

8070 60" Plain Tread - 11-1/2" OAK 78.87

8070 72" Plain Tread - 11-1/2" OAK 93.81

8070R 36" Mitered Return Tread -11-1/2" OAK $50.65

8070R 42" Mitered Return Tread -11-1/2" OAK 62.38





8071 L Tread Cap w/ Return OAK $18.53

8071 R Tread Cap w/ Return OAK 18.53

8072 Tread Cap OAK 9.79

8076 Riser Cap OAK 5.18

8075 36" Riser -7-1/2" OAK $21.56

8075 42" Riser -7-1/2" OAK 27.22

8075 48" Riser -7-1/2" OAK 32.05

8075 60" Riser -7-1/2" OAK 41.92






STAIR PARTS

Accessories


8080 Lineal Nosing -R/L OAK $270.00

8080 -13" Return Nosing -13" OAK 5.51

8090 3-1/2" Landing Tread -3-1/2" x RL OAK 691.28

8090 5-1/4" Landing Tread -5-1/4" x RL OAK 1,028.96

8095 Oak Cove OAK 122.74

8028 Tread Bracket -Plain OAK 6.71

8029 Tread Bracket -Scroll OAK 19.76

8422 Shoe Mould OAK 135.00

7017 Round Rosette OAK 7.61

7037 Oval Rosette OAK 7.39






STAIR PARTS

Accessories and Tools


3000 EA Plug OAK $1.29

3001 EA Rail Bolt 5.09

3011 EA Rail Bolt Wrench 49.68

3002 EA Wall Rail Bracket US3 7.00

EA Wall Rail Bracket US4 7.00

EA Wall Rail Bracket US15A 7.00

EA Wall Rail Bracket US 26D 7.00

EA Wall Rail Bracket US 10 B 7.00

3004 EA Clamp Nail 0.50

3003 EA Baluster Fast'nr 3/8 x 2-1/2 1.25

3009 EA Baluster Fastener Driver 20.57

3005 EA Newel Fastener 29.43

3006 EA Rail & Post Fastener 12.83

3018 EA Zip Bolt (pk of 10) 95.00

6283 EA Newel Post Keylock #FU6283 35.19






STAIR PARTS

Handrail Selection and Accessories


6010 2-1/4" Traditional Rail - 16' OAK $937.44 CLF

6010P 2-1/4" Traditional Rail w/plow OAK 1,108.56 CLF

6010BR 2-1/4" Traditional Bending Rail OAK 3,984.12 CLF

6015 Bending Mould (for 6010BR, & 6210BR) 509.64 CLF

6210 2-5/8" Traditional Rail OAK 1,714.92 CLF

6210P 2-5/8" Traditional Rail w/plow OAK 1,993.92 CLF

6210BR 2-5/8" Traditional Bending Rail Hem 4,307.76 CLF

6410 2-5/8" Sheraton Rail OAK 2,261.76 CLF

6410P 2-5/8" Sheraton Rail w/ plow OAK 2,529.60 CLF

6410BR 2-5/8" Sheraton Bending Rail OAK 6,789.00 CLF

6415 Sheraton Bending Mould Hem 509.64 CLF

6050 Oak Fillet CLF

6019 Large Hampton Rail OAK 2,172.11

6040 Wall Rail OAK 576.60 CLF

7023 Quarter turn for 6040 wall rail OAK 64.13 CLF






STAIR PARTS

Newels Over the Post - Traditional


4010 3" Starting Newel OAK 43" $80.13

4011 3" Volute Newel OAK 43" 103.45

4012 3" Turnout Newel OAK 43" 106.88

4013 3" Volute Newel 34-38 Code OAK 47-1/2" 117.55

4014 3" Turnout Newel 34-38 Code OAK 49" 143.44

4020 3" Intermediate Newel OAK 48" 110.86

4030 3" Pin Top Rake Newel Newel OAK 43" 107.95

4035 3" Landing Newel OAK 60" 157.02






STAIR PARTS

Newels Post to Post - Traditional


4040 3" Starting Newel OAK $83.48

4040.5 3" Split Newel OAK 45.79

4040-60 3" Starting Newel OAK 169.48

4042 3" Starting Newel OAK 99.92

4045 3" Landing Newel OAK 115.21








STAIR PARTS

Newels Post to Post -Hampton & Box Newels


4000 3-1/2" Starting Newel OAK $151.70

4001 3-1/2" Landing Newel OAK 175.17

4004 3-1/2" Starting Newel OAK 153.56

4005 3-1/2" Starting Newel OAK 145.12

4006 3-1/2" Landing Newel OAK 186.93

4090 4-1/2" Box Newel OAK $297.08

4091 5-1/2" Box Newel OAK 242.10

4091XL 6-1/4" Box Newel OAK 297.27






STAIR PARTS

Newels Sheraton


4454 3" Vol Newel 34"-38" rail height OAK $176.59

4410 3-1/2" Starting OAK 178.56

4340 3" Starting Newel OAK 124.69


4442 3-1/2" Landing OAK 223.80

4445 3-1/2" Landing OAK 262.19






STAIR PARTS

Balusters - 1-1/4" Taper Top


Balusters - 1-1/4" Traditional

5015- -34 1-1/4" Tapered OAK $12.91

5015- -36 1-1/4" Tapered OAK 13.50

5015- -39 1-1/4" Tapered OAK 15.33

5015- -42 1-1/4" Tapered OAK 16.00

5015-PR -34 1-1/4" Tapered Primed $6.10

5015-PR -36 1-1/4" Tapered Primed 6.44




Balusters - 1-1/4" Mini Sheraton

5014 Poplar -33 1-1/4" Tapered - Plain Poplar $10.97

5014 Poplar -36 1-1/4" Tapered - Plain Poplar 11.35

5014 Poplar -42 1-1/4" Tapered - Plain Poplar 14.47






STAIR PARTS

Balusters - 1-1/4" Square Top & Square

Balusters - 1-1/4" Square Top - Traditional

5067-PR 36 1-1/4" Square Top Primed $6.44

5067-PR 39 1-1/4" Square Top Primed 7.11

5067-PR 42 1-1/4" Square Top Primed 7.59

5070- 36 1-1/4" Square Top Primed $11.09

5070- 39 1-1/4" Square Top Primed 12.09

5070- 42 1-1/4" Square Top Primed 13.58

Balusters - 1-1/4" Square - Mission Style

5060- 41 1-1/4" S4S Blank Primed $8.16






STAIR PARTS

Balusters - 1-3/4" Square Top & Square

Balusters - 1-3/4" Square Top - Traditional

5005-PR -32 1-3/4" Square Top Primed $10.27

5005-PR -36 1-3/4" Square Top Primed 11.63

5005-PR -42 1-3/4" Square Top Primed 13.72

Balusters - 1-3/4" Square - Mission Style

5360- 36 1-3/4" S4S Blank Primed $11.74

5360- 42 1-3/4" S4S Blank Primed 13.72






STAIR PARTS

Balusters - 1-3/4" Sheraton

Balusters - 1-3/4" Square Top - Sheraton

5405 -36 1-3/4" Square Top - Plain Poplar $26.37

5405 -39 1-3/4" Square Top - Plain Poplar 28.01

5405 -42 1-3/4" Square Top - Plain Poplar 36.12






STAIR PARTS

Fittings 7000 & 7200 Traditional Series for 6010 & 6210 Rails

Fittings for the 6010 rail begin with 70_ _Fittings for the 6210 rail begin with 72_ _






STAIR PARTS

Fittings 7000 & 7200 Traditional Series for 6010 & 6210 Rails

Fittings for the 6010 rail begin with 70_ _Fittings for the 6210 rail begin with 72_ _






STAIR PARTS

Fittings - Traditional 7000 Series - for 6010 Rail

7009 Returned End OAK $11.32

7010 Start Easing OAK 31.39

7011 Level Qtr Turn OAK 23.48

7012 Up Easing OAK 21.78

7013 Over Easing OAK 21.51

7014 90 Up Easing OAK 67.39

7015 Starting Easing Ret End OAK 28.52

7019 Opening Cap OAK 16.08

7020 Tandem Cap OAK 49.06


7030 LH Volute OAK 77.62

7035 RH Volute OAK 77.62

7040 LH Turnout OAK 109.43

7045 RH Turnout OAK 55.22

7047 (7007) S TURN Left Hand (4-1/2" offset) OAK 42.74

7048 (7006) S TURN Right Hand (4-1/2" offset) OAK 38.75

7050 LH Gooseneck OAK 223.78

7055 RH Gooseneck OAK 267.07



7089 Gooseneck w/cap OAK 137.83

7099 Gooseneck w/Level Rail OAK 45.53






STAIR PARTS

Fittings - Traditional 7200 Series - for 6210 Rail

7209 Returned End OAK $27.82

7210 Start Easing OAK 122.72


7212 Up Easing OAK 77.38

7213 Over Easing OAK 69.01

7215 Start Easing Ret End OAK 124.70

7220 Tandem Cap OAK 84.28

7221 Qtr Turn w/Cap OAK 122.41

7230 LH Volute OAK 349.10

7235 RH Volute OAK 349.10

7240 LH Turnout 4-7/8 C to C OAK 175.00

7241 LH Turnout 2-7/8 C to C OAK 175.00

7245 RH Turnout 4-7/8 C to C OAK 175.00

7246 RH Turnout 2-7/8 C to C OAK 175.00







7299 Gooseneck no Cap OAK 148.80






STAIR PARTS

Iron Stair Parts - Balusters & Accessories

1/2" Iron BallustersStocked in SATIN BLACK

Other finishes available by special order.






STAIR PARTS

Iron Stair Parts - Balusters & Accessories

1/2" Iron BallustersStocked in SATIN BLACK

Other finishes available by special order.

MC658 44" SB Iron Balluster 1 Twist $9.78

MC533 44" SB Iron Balluster 2 Twist 10.08

MC482 44" SB Iron Balluster 1 Basket 2 Twist 14.26

MC481 44" SB Iron Balluster 2 Basket 1 Twist 18.40

M452 44" SB Iron Baluster Scroll 34.00

M451 44" SB Iron Baluster Small Scroll 32.16

M505 44" SB Iron Baluster 1 Ribbon Twist 12.35

M506 44" SB Iron Baluster 2 Ribbon Twist 13.97

MC782 44" SB Iron Baluster 1 BSKT & 2 Ribbon Twist 19.76

MC781 44" SB Iron Baluster 2 BSKT & 1 Ribbon Twist 23.94

M742 44" SB Iron Baluster 1 B/FLY & 2 Ribbon Twist 22.73

M741 44" SB Iron Baluster 2 B/FLY & 1 Ribbon Twist 25.80

06SB SB 1/2" Balluster Shoe 3.49

02SB SB 1/2" Rake Balluster Shoe 4.03

3200 Injector Gun $115.38

3200EF Fast Cure Epoxy 34.12

3200NZ Injector Nozzle 4.19






STAIR PARTS







Disapearing Attic StairsRough Opening & Landing

Model Ceiling Height Min. Max. Space Code

WINDSOR - STANDARD DUTY

(1) (2)

BE-100 25.5 x 54 x 10'2" 8'9" 10'2" 65" 75" 250 lbs $293 051-001 80

BE-100 F (Fire Guard) 25.5 x 54 x 10'2" 8'9" 10'2" 65" 75' 250 lbs 349 051-001 91

BET-89 22.5 x 54 x 8'9" russ size 7'0" 8'10" 58" 66" 250 lbs 269 051-001 81

BET-100 22.5 x 54 x 10'2" russ size 8'9" 10'2" 65" 75" 250 lbs 291 051-001 82

PREMIUM - HEAVY DUTY

AE-89 25.5. x 54 x 8'9" 7'0" 8'9" 59" 69" 350 lbs $366 051-001 83

AE-100 25.5 x 54 x 10'3" 8'9" 10'1" 67" 78" 350 lbs 397 051-001 84

AE-100 F (Fire Guard) 25.5 x 54 x 10'3" 8'9" 10'1" 67" 78" 350 lbs 453 051-001 86

PREMIUM - SPACEMAKERSame features as the Premium, with a wider opening for easier use.

AG-100-F (Fire Guard) 30 X 54 X 10'3" 8'9" 10'1" 67" 79" 350 lbs $467 051-001 130

ELITE ALUMINUM - HEAVY DUTY

AA-2510 25.5 x 54 x 7-8" - 10'3" 7'8" 10'3" 64" 74" 375 lbs $478 051-001 72

FTAA-2510 (Fire Guard) 25.5 x 54 x 7-8" - 10'3" 7'8" 10'3" 64" 74" 375 lbs 541 051-001 75

EVEREST ALUMINUM - 12' HEAVY DUTY

FTAL-258P 25.5 x 64 x 10' - 12' 10'0" 12'0" 90" 92" 350 lbs $1,007 051-001 35

. ACCESSORIES

Pull Down Pole Kit AAPD 42" - 72" $36 051-001

Weather Stripping AAWB oly bagged special order 051-001

F = FireGuard Panel.These are fire retardant, not fire rated.

Meets most building codes.

Ceiling Height

Note: Attic stairs are shipped

fully assembled, in a carton.

LISTLoad

Capacity

Same features as the ELITE ALUMINUM. Comes with Adjustable Pull-Down Pole & Insulated Door

Projec tion

5-1/4" Step Depth, 5-1/4" Rail Size,3/16" Steel Rod Reinforced Tread

3-5/16" Step Depth, 3/4" x 3-3/8" Rail Size,3/16" Steel Rod Reinforced Tread

3-1/4" Step Depth, 3-1/8" Rail Size, Slip-Resistant StepsAdjustable Shoes, Advanced Cylinder Design












COLUMNS AND PORCH POST

PermaCast Round Fiberglass Columns

- Weatherproof LIST PRICE

- Low Maintenance

Columns are among the most versatile vertical supports available.

These architecturally proportioned columns feel like natural stone

and have the enduring characteristics of stone.

Meets ASTM E84-01 Fire code rating Priced with Code

Cap & Base

Plain Round Stock Sizes

6" x 8' Plain $326 047-040

8" x 8' Plain 318

8" x 10' Plain 376

10" x 8' Plain 397

10" x 10' Plain 475

12" x 8' Plain $626

12" x 10' Plain 742

12" x 12' Plain 960

Extra Cap and Base sets

(Included in Column prices)

6" $71 047-040

8" 71

10" 102

12" 136

Roman Doric cap & base or Attic base

can be special ordered at an additional charge.

Sizes up to 30" in diameter, and lengths to 30' are available in PERMA Cast columns, in a variety

of types, including Tapered Round, Round with No-Taper, and Fluted.







PermaLite Square Synthetic Columns

PermaLite Square Columns with Cap & Base LIST PRICE

Stock Sizes 8" x 8' $463

8" x 10' $549

PermaLite Extra Cap & Base Sets - Square

(Included with Complete column set above)

8" $85

Inside dimension: Structural load limits:

6" 5-1/4" 5,000 lbs.Max

8" 7-1/4" 6,500 lbs.Max

10" 9-1/4" 7,000 lbs.Max

12" 11-1/4" 7,500 lbs.Max

PermaLite synthetic columns by HB&G are not only

Lightweight and Load Bearing, but are also cost effective, versatile, and require very little

maintenance.The PermaLite column is available in

Round, Square, and Square with Recessed Panel.

Perma-Lite Square Columns: Cost Effective, Load Bearing, Light Weight, and require little maintenance.







PermaCast Square Fiberglass Columns

- Weatherproof

- Low Maintenance

- LIFETIME WARRANTY

Constructed of fiberglass-reinforced polymers (FPR), Poly-Classic

Columns are among the most versatile vertical supports available.

These architecturally proportioned columns feel like natural stone

and have the enduring characteristics of stone.

Meets ASTM E84-01 Fire code rating

PermaCast Square Columns with Cap & BaseThe columns below are priced with the cap and base.

LIST PRICE

Stock Sizes 8" x 8' $632

8" x 10' 724

10" x 10' 953

PermaCast Extra Cap & Base Sets - Square(Included with Complete column set above)

8" $91

10" 132

Inside dimension: Structural load limits:

8" 6-7/8" 10,000 lbs.Max

10" 9" 14,000 lbs.Max

12" 11" 18,000 lbs.Max

14" 14-1/4" 20,000 lbs.Max







PermaCast Square Rough SawnTM

Fiberglass Columns• First Fiberglass Column with the

look and feel of wood

• Will not check, twist, or rot

• Load Bearing (Up to 7,300 lbs.)

• Weather Proof

• Insect Proof

• Low Maintenance

• Easy Installation

• Limited Lifetime Warranty

10" x 12' STOCK $1,024

Other available* sizes

8" x 8'

8" x 9'

8" x 10'

10" x 8'

10" x 9'

12' x 8'

12" x 9'

12" x 10'

12" x 12'

Rough SawnTM Accessories4" Trim* $426" Trim* $50

24" Brace $212

Shown with trim

* Trim is 4 pieces of material. Enough for a cap or base.Ready to stainor paint. Oversized so they can be cut to pinwheel the column ormitered.

Polyurethane brace with the same look and feel of the PermaCast® RoughSawn™ structural fiberglass column. Ready to stain or paint.







ROUND WOOD COLONIAL TAPERED PINE andARCHITECTURAL WOOD COLUMNS

HB&G's architectural wood shop can produce a complete line of wood column styles and sizes on a stock and custom size basis. We offer columns ranging from the timeless architectural orders, all-tapered, plain or fluted styles. Columns are available in paint grade, finger-jointed wood species (pine, redwood, or cedar) for interior or exterior applications or stain grade woods for interior applications. Our stock wood columns are available in a finger-jointed pine. We can factory prime columns to be painted and

apply an asphaltum coating to the interior of the column for added protection for columns to be installed outside.

Options include round and square fluted, recessed panel Heritage, and textured Elite or Legend.

Please provide your specifications for a quote.

Basic Round Wood Columns are available by Special Order in sizes 6" to 12" diameter, and 8', 10', & 12' lengths.







TURNED PORCH POST

PERMA POST by HB&G

5" x 5" x 8' $2156" x 6" x 8' 337

COLONIAL STYLE WOOD STYLE PORCH POST

40-5/8" Turned Area - 32" Unturned base

4" x 4" x 8' $1515" x 5" x 8' 2136" x 6" x 8' 2706" x 6" x 9' 369

- Kiln Dried Finger-jointed pine

- Primed (these are not pressure treated)

Net Sizes for Unturned Areas: Load Bearing

4 x 4 =3 -1/4" 3,000

5 x 5 =4 -1/4" 6,000

6 x 6 =5 -1/4" 7,500

CAST ALUMINUM PLINTHS

3-1/4" for 4 x 4 Post 13.47$ 4-1/4" for 5 x 5 Post 15.595" for 6 x 6 Post 17.48

Note: PermaPost are available, and carry a 25 year warranty. See Permapost above.

Wood post must be installed with aluminum plinths, and painted with high quality exterior paint, to comply with manufacturer's 1 year warranty.

- Weatherproof, Will Not Rot- Low Maintenance - Insect Proof- Can be Painted. Requires only One Coat of Latex.- Can be Trimmed as Necessary- Shipped White Ready to Install- Installs Easily with Common Carpentry Tools

The Perma Post is shipped with a 20 ga. galvanized structural steel tube inside. Load bearing capacity 1300 lbs.





Section 13 page 1 Effective: Aug.27, 2019

TRILENNIUM Swinging Door Multi-Point Hardware

Trilennium Multi-Point Hardware System -

More than just security -

- Better door closure and sealing than a single point lock

- I-Beam construction incorporates greater strength,stiffness, and security into the

complete lock system.

- Ease of operation - 90 degree thumb turn rotation

engages three hardened steel deadbolts into

reinforced steel strike plates.

The draw-in design of the bolts pull the door

tightly into the weather-strip and securely

holds the door to the frame.

One simple downward movement on the

inside lever releases all three bolts.

- Variety of handle sets and finishes are available.

Eclipse Lever set

Entrance Grip Handleset with interior Eclipse Lever






TRILENNIUM Swinging Door Multi-Point Hardware

Trilennium Multi-Point Lock - Hardware only

Series 3000 6'8" LH Stainless Steel 521.91$ 059-016

Series 3000 6'8" RH Stainless Steel 521.91 059-016

Series 3000 8'0" LH Stainless Steel 604.25 059-016

Series 3000 8'0" RH Stainless Steel 604.25 059-016

Series 3000 6'8" LH Victorian Bronze 508.66$ 059-016

Series 3000 6'8" RH Victorian Bronze 508.66 059-016

Series 3000 8'0" LH Victorian Bronze 591.67 059-016

Series 3000 8'0" RH Victorian Bronze 591.67 059-016

TRILENNIUM Multi-Point Hardware Finish Options

Strike Plates - for Trilennium Compatible Astragal

TC-STRIKE PCK-ULT Victorian Bronze 50.91$ 059-016

TC-STRIKE PCK-ULT Stainless Steel 64.51 059-016

TC-STRIKE PCK- ULT Satin Nickel 116.85 059-016

TC-STRIKE PCK-ULT Black 57.06 059-016

Strike Plates - for Wood Astragals or Single door unit JambTC-STRIKE PCK-ULT Victorian Bronze 31.49$ 059-016

TC-STRIKE PCK-ULT Stainless Steel 43.66 059-016

TC-STRIKE PCK- ULT Satin Nickel 84.78 059-016

TC-STRIKE PCK-ULT Black 34.79 059-016

** Compatible Astragal option must be added for double units.

Edge faceplate finish

For Installation in Single Door Unit or Double Door Unit ** see the ADDITIONS pages in Wood exterior, or Steel and Fiberglass pages in sections 4B and 4C.






TRILENNIUM Multi-Point Hardware Finish Options

Trilennium Eclipse Lever - inside and outside

LIST PRICE RODUCT CODE

Eclipse Lever -10P Victorian Bronze $235 059-016

Eclipse Lever -15 Satin Nickel 388 059-016

Trilennium Eclipse Grip Handleset - with Lever inside

Eclipse Grip Handleset 10P Victorian Bronze -Right Hand $605 059-016

Eclipse Grip Handleset 10P Victorian Bronze -Left Hand 605 059-016

Eclipse Grip Handleset 15PVD Satin Nickel -Right Hand 873 059-016

Eclipse Grip Handleset 15PVD Satin Nickel -Left Hand 873 059-016

Trilennium Curved Lever - inside and outside

Curved Lever -10P Victorian Bronze $249 059-016

Curved Lever -15 Satin Nickel 396 059-016

Trilennium Rectangular Lever - inside and outside

Rectangular Lever - 10 Victorian Bronze $265 059-016

Rectangular Lever - Black 265 059-016

Rectangular Lever - Satin Nickel 476 059-016

Accessories

#1100 Trilennium Construction Handle $41 059-016

#2000 9" Trilennium Magnum Bolt (for wood astragal) 24 059-016

#2000 19" Trilennium Magnum Bolt (for wood astragal) 37 059-016

#613 Trilennium Astragal Boot (for wood astragal) 13 059-016

bolts

Construction handle






Blank





Section 13 page 5 Effective:October, 2019

Locks & Miscellaneous Door Hardware

Style Model Finish pcs/ctn LIST PRICE Code

L03 Lifetime Polished Brass3 Polished Brass5 Antique Brass

11P Venetian Bronze15 Satin Nickel *

15-A Antique Nickel *

26-D Satin Chrome *

514 Iron Black* The latches for locks in these finishes will have a 26D finish only.

Lifetime Mechanical Warranty

Solid Forged-Brass Handlesets

Traditional and Timeless Designs

Signature Series

Kwikset Series

ANSI/BHMA Grade 1 980/985 Deadbolt

Unique Rustic Finishes

1 Year Electronic Warranty

Easy Installation

SmartKey with BumpGuard Technology

Lifetime Mechanical Warranty

10 Year Finish Warranty (Lifetine on L03)

ANSI/BHMA Grade 3

*SmartKey with BumpGuard Technology

5 Year Finish Warranty (Lifetime on L03)

Signature Series keyed locks are available with SmartKey Technology (SMT) which allows for do-it-yourself keying without removing the lock

from the door.

F.O..B. New Orleans or Delivered our Truck. Prices Subject To Change Without Notice







Signature Series Handlesets

LIP - see note below SMT - Smart KeyAshfield 800 ADH 11P Venetian Bronze LIP SMT $277.40 068-049

800 ADH 514 Iron Black LIP SMT 288.70 068-049

Avalon 800 AVH 11P Venetian Bronze LIP SMT $277.40 068-049800 AVH 514 Iron Black LIP SMT 288.70 068-049

Chelsea 800 CE 11P Venetian Bronze LIP SMT $216.20 068-041800 CE 15 Satin Nickel LIP SMT 216.20 068-041800 CE 15-A Antique Nickel LIP SMT 216.20 068-041

Shelburne 800 SE 15 Satin Nickel LIP SMT $261.10 068-041

* Note : Above pricing is for exterior of handleset and does not include interior trim(LIP=Less Interior Pack). The interior trim pack (knob or lever) and deadbolt function

(single or double cylinder) must be added. See Interior Pack pricing on next page.

Ashfield Avalon Chelsea Shelburne


Owner

Typewritten Text

Owner

Typewritten Text







Interior Packs for 800 series Signature HandlesetsSee stock selections of interior packs in the pricing section of each interior lock style.

ADD to Handleset Price

Signature Series Lever and Laurel KnobSingle Cylinder 966 $71.40

Double Cylinder 967 * ns

Signature Series Knob (other than Laurel)Single Cylinder 966 $59.20


Kwikset Series LeverSingle Cylinder 966 $64.30


Kwikset KnobSingle Cylinder 966 $52.00


* 967 Double Cylinder interior pack is not stocked for all designs.








Signature Series - Levers

Ashfield Lever -(ADL)Venetian Bronze

720 ADL 11P Passage/Closet 12 $68.30 068-047730 ADL 11P Privacy 12 71.40 068-047740 ADL 11P Keyed 12 114.20 068-047788 ADL 11P Dummy 20 33.70 068-047966 ADL 11P i/s trim sgl. 12 71.40 068-047

Functions:

720 -Passage/Closet

730 -Privacy

740 -Keyed

966 -handleset i/s trim sgl.

967 -handleset i/s trim dbl.









Commonwealth Venetian Bronze

720 CHL 11P Passage/Closet 12 $60.20 068-007730 CHL 11P Privacy 12 63.20740 CHL 11P Keyed 12 107.10788 CHL 11P Dummy RH 20 30.60788 CHL 11P Dummy LH 20 30.60966 CHL 11P i/s trim sgl. RH 12 71.40966 CHL 11P i/s trim sgl. LH 12 71.40

Satin Nickel

720 CHL 15 Passage/Closet 12 $60.20 068-007730 CHL 15 Privacy 12 63.20740 CHL 15 Keyed 12 107.10788 CHL 15 Dummy RH 20 30.60788 CHL 15 Dummy LH 20 30.60966 CHL 15 i/s trim sgl. RH 12 65.00966 CHL 15 i/s trim sgl. LH 12 65.00

Functions:

720 -Passage/Closet

730 -Privacy

740 -Keyed




Owner

Typewritten Text








Tustin Lever (TNL)

720 TNL 11P Passage/Closet 20 $51.00 068-047730 TNL 11P Privacy 20 54.10 068-047740 TNL 11P Keyed 20 76.50 068-047788 TNL 11P Dummy RH 20 25.50 068-047788 TNL 11P Dummy LH 20 25.50 068-047966 TNL 11P i/s trim sgl. RH 12 71.40 068-047966 TNL 11P i/s trim sgl. LH 12 71.40 068-047

720 TNL 15 Passage/Closet 20 $51.00 068-047730 TNL 15 Privacy 20 54.10 068-047740 TNL 15 Keyed 20 76.50 068-047788 TNL 15 Dummy RH 20 25.50 068-047788 TNL 15 Dummy LH 20 25.50 068-047966 TNL 15 i/s trim sgl. RH 12 71.40 068-047966 TNL 15 i/s trim sgl. LH 12 71.40 068-047

Functions:

720 -Passage/Closet

730 -Privacy

740 -Keyed










Signature Series - Knobs

Hancock Knob (H)

720 H 514 Passage/Closet 12 $38.80 068-048730 H 514 Privacy 12 42.80 068-048740 H 514 Keyed 12 65.30 068-048788 H 514 Dummy 20 19.40 068-048966 H 514 i/s trim sgl. 12 59.20 068-048

720 H 3 Passage/Closet 12 $30.60 068-013730 H 3 Privacy 12 33.70 068-013740 H L03 Keyed 12 62.20 068-013740 H 3 Keyed 12 57.10 068-013788 H 3 Dummy 20 15.30 068-013966 H 3 i/s trim sgl. gl I/s tr 12 59.20 068-013

Functions:

720 -Passage/Closet More Hancock on next page.

730 -Privacy

740 -Keyed




Owner

Cross-Out








Hancock Knob (H)

720 H 11P Venetian Bronze Passage/Closet 12 $35.70 068-013730 H 11P Privacy 12 38.80 068-013740 H 11P Keyed 12 62.20 068-013788 H 11P Dummy 20 18.40 068-013966 H 11P i/s trim sgl. 12 59.20 068-013

720 H 15 Satin Chrome Passage/Closet 12 $35.70 068-013730 H 15 Privacy 12 38.80 068-013740 H 15 Keyed 12 62.20 068-013788 H 15 Dummy 20 18.40 068-013966 H 15 i/s trim sgl. 12 59.20 068-013

720 H 15-A Antique Nickel Passage/Closet 12 $35.70 068-013730 H 15-A Privacy 12 38.80 068-013740 H 15-A Keyed 12 62.20 068-013788 H 15-A Dummy 20 18.40 068-013966 H 15A i/s trim sgl. 12 59.20 068-013

720 H 26D Satin Chrome Passage/Closet 12 $35.70 068-013730 H 26D Privacy 12 38.80 068-013740 H 26D Keyed 12 62.20 068-013788 H 26D Dummy 20 18.40 068-013966 H 26D i/s trim sgl. 12 59.20 068-013

Functions:

720 -Passage/Closet

730 -Privacy

740 -Keyed











Laurel Knob (L)

720 L 514 Iron Black Passage/Closet 12 $57.10 068-048730 L 514 Privacy 12 60.20 068-048740 L 514 Keyed 12 83.60 068-048788 L 514 Dummy 20 28.60 068-048966 L 514 i/s trim sgl. 12 71.40 068-048

720 L 11P Venetian Bronze Passage/Closet 12 $54.10 068-024730 L 11P Privacy 12 57.10 068-024740 L 11P Keyed 12 80.60 068-024788 L 11P Dummy 20 27.50 068-024966 L 11P i/s trim sgl. 6 71.40 068-024

720 L 15 Satin Nickel Passage/Closet 12 $54.10 068-024730 L 15 Privacy 12 57.10 068-024740 L 15 Keyed 12 80.60 068-024788 L 15 Dummy 20 27.50 068-024966 L 15 i/s trim sgl. 9 71.40 068-024

Functions:

720 -Passage/Closet

730 -Privacy

740 -Keyed




Owner

Typewritten Text







Kwikset Signature Series - DeadBolts

980 11P Venetian Bronze 12 $74.50 068-015980 514 Iron Black 12 77.50 068-015

985 ** 11P Venetian Bronze 12 101.00 068-015Grade 1

780 L03 Lifetime Polished Brass 12 $63.20 068-015780 3 Polished Brass 12 55.10 068-015

Grade 2 780 11P Venetian Bronze 12 63.20 068-015780 15 Satin Nickel 12 63.20 068-015780 15-A Antique Nickel 12 63.20 068-015780 26D Satin Chrome 12 63.20 068-015

785 ** L03 Lifetime Polished Brass 12 $89.80 068-015785 ** 3 Polished Brass 12 81.80 068-015

Grade 2 785 ** 11P Venetian Bronze 12 81.60 068-015785 ** 15 Satin Nickel 12 89.80 068-015

Kwikset Series - Deadbolts

660 3 Polished Brass 12 35.60 068-015660 15 Satin Nickel 12 38.70 068-015660 11P Venetian Bronze 12 38.70 068-015

665 ** 3 Polished Brass 12 43.80 068-015

** Double Cylinder deadbolts will be discontinued from our stock. They will be available by speial order. Pricing listed is subject to stock on hand.

Single Cylinder

Double Cylinder

Double Cylinder

Single Cylinder

Double Cylinder

Single Cylinder








Kwikset Series - Levers

Dorian Lever (DNL)

200 DNL 15 Satin Nickel Passage/Closet 20 $41.80 068-050300 DNL 15 Privacy 20 44.90 068-050405 DNL 15 Keyed 20 65.20 068-050488 DNL 15 Dummy 20 22.40 068-050966 DNL 15 i/s trim sgl. 12 64.30 068-050

Functions:

200 -passage /Closet

300 -privacy

400 -keyed

488 -Dummy

966 -handleset i/s trim sgl









Kwikset Series - Knobs

Cove Knob (CV)

200 CV 11P Venetian Bronze Passage/Closet 12 $28.60 068-048300 CV 11P Privacy 12 31.60 068-048400 CV 11P Keyed 12 42.70 068-048488 CV 11P Dummy 20 16.30 068-048966 CV 11P i/s trim sgl. 12 52.00 068-048

200 CV 15 Satin Nickel Passage/Closet 12 $28.60 068-048300 CV 15 Privacy 12 31.60 068-048400 CV 15 Keyed 12 42.70 068-048488 CV 15 Dummy 20 16.30 068-048966 CV 15 i/s trim sgl. 12 52.00 068-048

Functions:


300 -privacy

400 -keyed

488 -Dummy











Polo Knob (P)

200 P 11P Venetian Bronze Passage/Closet 30 $25.50 068-007300 P 11P Privacy 30 28.60 068-007400 P 11P Keyed 30 39.70 068-007488 P 11P Dummy 20 14.30 068-007966 P 11P i/s trim sgl. 52.00 068-007

200 P 15 Satin Nickel Passage/Closet 30 $25.50 068-007300 P 15 Privacy 30 28.60 068-007400 P 15 Keyed 30 39.70 068-007488 P 15 Dummy 20 14.30 068-007966 P 15 i/s trim sgl. 52.00 068-007

Functions:


300 -privacy

400 -keyed

488 -Dummy











Tylo Knob (T)

*200 T 3 Polished Brass Passage/Closet 30 $21.40 068-009*300 T 3 Privacy 30 23.50 068-009400 T 3 Keyed 30 34.60 068-009488 T 3 Dummy 20 10.20 068-009966 T 3 i/s trim sgl. 6 52.00 068-009

*w/steel latch

*200 T 26D Satin Chrome Passage/Closet 30 20.40 068-009*300 T 26D Privacy 30 23.50 068-009400 T 26D Keyed 30 34.60 068-009488 T 26D Dummy 20 10.20 068-009966 T 26D i/s trim sgl. 52.00 068-009

*w/steel latch

Functions:


300 -privacy

400 -keyed

488 -Dummy










Pocket Door Latches

Notch Pocket Door LocksPassage

332 3 Polished Brass Pass. $34.00 068-028332 5 Antique Brass Pass. 34.00 068-028332 26 Polished Chrome Pass. 34.00 061-015

Requires a 2-1/4" x 332 15A Antique Nickel Pass. 34.00 061-015cut-out in edge of 1SDL 17 15 Satin Nickel Pass. 34.00 068-028

SDL 17 10B Venetian Bronze Pass. 34.00 061-015Privacy

333 3 Polished Brass Priv. $36.00 068-028333 5 Antique Brass Priv. 36.00 068-028333 26 Polished Chrome Priv. 36.00 061-015333 15A Antique Nickel Priv. 36.00 061-015

SDL16 15 Satin Nickel Priv. 36.00 068-028SDL16 10B Venetian Bronze Priv. 36.00 061-015

Round Pocket Door LocksPassage

334 3 Polished Brass Passage $38.00 068-028334 15 Satin Nickel " 38.00 068-028334 15A Antique Nickel " 38.00 068-028334 10B Venetian Bronze " 38.00 068-028

Privacy335 3 Polished Brass Privacy $42.00 068-028

Round design fits a 335 15 Satin Nickel " 42.00 068-0282-1/8" lock bore. 335 15A Antique Nickel " 42.00 068-028

335 10B Venetian Bronze " 42.00 068-028

Finishes

3 Polished Brass

5 Antique Brass

26 polished chrome

15A Antique Nickel

15 Satin Nickel

Bronze10B/11P








This page blank for future use.




504-733-8500 800-229-3953email: [email protected]:// NewOrleans.DykeDoors.com

Section 18 Page 1Effective:October 2019

HARDWARE

MISCELLANEOUS DOOR HARDWARE LIST PRICE Product M/M

Door Saver - Hinge Mounted Door Stop This design braces against the hinge, so it will not damage the door.

Door Saver I $4.00 061-014

Bright Brass, Pewter**, Antique Nickel, Antique Brass, Bronze

** used as satin nickel, and chrome

Door Saver II Heavy Duty $14.95 061-014Brushed Stainless, Bronze

Flexible Door Stop (Spring Type) $2.25 061-014

Brass, Satin Chrome/Nickel, Ant Brass, Dark Bronze

Rigid Door Stop US 26D $2.25 061-015

Ball Catches Drive-in Brass - with Brass Strike plate $6.00 061-005

Ball Catch Strike Plates (Optional Finish Strike Plates) $2.20 061-005

Brass, Satin Chrome/Nickel, Ant Brass, Dark Bronze, Black

Deadbolt Strike Plate 1" x 2 1/4" $2.20 061-014

Satin Nickel, Ant Nickel, or Bronze

E-Z Latch Magnetic latch for double interior doors.

EZ Latch ctn pk 1 per ctn each $18.00 061-014

* EZ Latch shop pack 100 per ctn each 12.80 061-014* For shop use, or sold in 100 pc ctn only.

The magnets latch both doors at the top and align the doors at the bottom.






HARDWARE

HINGES

3-1/2" x 5/8 radius 4" x 5/8 Radius 4" x 5/8 Radius/Square 4" Spring

each

3-1/2" x 3-1/2" STANDARD 5/8" Radius Corner, Steel Hinges $4.50 061-009

3-1/2" x 3-1/2" BALL BEARING 5/8" radius corner, steel hinges $8.003-1/2" x 3-1/2" 5/8" Radius Corner, STAINLESS STEEL Hinges $9.00

4" x 4" STANDARD 5/8" / 5/8" Radius Corner , Steel Hinges $6.50 061-009

4" x 4" STANDARD 5/8"Radius / SQR Corner , Steel Hinges 6.504" x 4" NRP 5/8" / 5/8" Radius Corner , Steel Hinges 7.004" x 4" NRP 5/8"Radius / SQR Corner , Steel Hinges 7.004" x 4" BALL BEARING 5/8" / 5/8" Radius Corner , Steel Hinges 11.004" x 4" SPRING 5/8" / 5/8" Radius Corner , Steel Hinges 18.004" x 4" 5/8" / 5/8" Radius Corner , STAINLESS STEEL Hinges 12.004" x 4" NRP 5/8" Radius Corner , STAINLESS STEEL Hinges 12.00

For full cartons of 100 hinges - Deduct 25%

Stock Hinge Selections






HARDWARE

Double Acting Floor Hinge non-adjustable - for doors to 35 lbs.

Double Acting Spring Hinge

Hinge US3 BRIGHT BRASS $119.84 061-009

Hinge CB/US10B BRONZE 144.48 Hinge SN/US15 SATIN NICKEL 131.36Jamb Mounting Bracket

Bracket US3 BRIGHT B $42.12 061-009

Bracket US10B/CB 34.32 Bracket US15/SN M 30.32

Head & Foot Bolts

Flush Bolts - 6" - Mortised - slide action $18.00 061-005

Bright Brass, Bronze, Satin Chrome, or Antique Nickel 061-014

Surface Bolts - 6" $20.00 061-014 Bright Brass, Satin Chrome, Satin Nickel, or Antique Nickel

Endura Mortised Flush Bolts - with Flip Lever actionShop standard for exterior wood double door units

7" Bolt - with Flip Lever action $14.06 061-005

Brass, Col. Bronze, or Satin Nickel

18" Bolt - with Flip Lever action 34.94 061-005 Col. Bronze, Satin Nickel, or Antique Nickel

18" has concealed rod.

Door Viewer

US 3 Bright Brass 160 0 - 1/2" bore $10.00 061-014

US 15 Satin Nickel 160 0 - 1/2" bore 10.00






HARDWARE

Pocket Door Latches

Square Notched - Requires 2-1/4" x 1-7/8" cut-out

Passage

332 3 Polished Brass $34.00 068-028

332 5 Antique Brass 34.00 068-028

332 26 Polished Chrome 34.00 061-015

332 15A Antique Nickel 34.00 061-015

SDL 17 15 Satin Nickel 34.00 068-028

SDL 17 10B Venetian Bronze 34.00 061-015Privacy

333 3 Polished Brass $36.00 068-028

333 5 Antique Brass 36.00 068-028

333 26 Polished Chrome 36.00 061-015

333 15A Antique Nickel 36.00 061-015

SDL16 15 Satin Nickel 36.00 068-028

SDL16 10B Venetian Bronze 36.00 061-015

Round Round design installs in standard 2-1/8" lock bore.

Passage

334 3 Polished Brass $38.00 068-028

334 15 Satin Nickel 38.00 068-028

334 15A Antique Nickel 38.00 068-028

334 10B Venetian Bronze 38.00 068-028

Privacy

335 3 Polished Brass $42.00 068-028

335 15 Satin Nickel 42.00 068-028

335 15A Antique Nickel 42.00 068-028

335 10B Venetian Bronze 42.00 068-028

Edge PullPocket door Edge Pull. 150 -3PK1 $7.69 061-015 For use with converging doors.

See Section 13 for other door lock selections






HARDWARE

Hand Rail Bracket

US3 Bright Brass $7.75 061-014

US4 Dull Brass 7.00 061-014

US 15A Antique Nickel 7.00 061-014

US 26D Satin Chrome 7.00 061-014

US 10 B Rubbed Bronze 7.00 061-014

Closet Rods and Shelf Supports

Adjustable Closet Rod # 1795

18" to 30" $8.7630" to 48" 15.5248" to 72" 18.3672" to 96" 22.9696" to 150" 33.32

Rod and Shelf Support White $6.75

"L" Support Bracket White $6.48

Metal Pole Socket White $2.93






HARDWARE

Barn Door Hardware WALL MOUNTED BARN DOOR KITS

100K• Hardware available for 1-3/8" and 1-3/4" thick doors weighing up to 250 lbs.

• Stocked in two factory finishes: Matt Black and Stainless Steel (Bronze by special order)• Factory finished, ready-to-install• Ideal for openings 28" - 34" wide for 78 3/4" track and openings 34" - 44" wide for 96" track• Unique barn door style hardware enables door to slide parallel to wall• Use for closet, room divider or passage door applications• Available accessories: Handle, Pull, Privacy latch (internal-side) and track connector for bi-parting door application

LIST PRICE ITEM CODE

78-3/4" BD KIT STRAIGHT STRAP STAINLESS STEEL $294 061-012

96" BD KIT STRAIGHT STRAP STAINLESS STEEL 322 061-012

78-3/4" BD KIT STRAIGHT STRAP MATTE BLACK 224 061-012

96" BD KIT STRAIGHT STRAP MATTE BLACK 259 061-012

78-3/4" BD KIT BENT STRAP STAINLESS STEEL $301 061-012

96" BD KIT BENT STRAP STAINLESS STEEL 322 061-012

78-3/4" BD KIT BENT STRAP MATTE BLACK 253 061-012

96" BD KIT BENT STRAP MATTE BLACK 259 061-012

78-3/4" BD KIT TOP MOUNT STAINLESS STEEL $294 061-012

96" BD KIT TOP MOUNT STAINLESS STEEL 315 061-012

78-3/4" BD KIT TOP MOUNT MATTE BLACK 217 061-012

96" BD KIT TOP MOUNT MATTE BLACK 245 061-012

STRAIGHT STRAP BENT STRAP TOP OF DOOR

BENT STRAP KITS

STRAIGHT STRAP KITS

102K 101K

BD100K-07800-SSBD100K-09600-SSBD100K-07800-MBBD100K-09600-MB

• Kits in 78 3/4" and 96" track widths, includes door straps, all mounting hardwareand floor guide options

BD102K-07800-SS

BD101K-09600-SSBD101K-07800-MBBD101K-09600-MB

BD102K-09600-SSBD102K-07800-MBBD102K-09600-MB

TOP OF DOOR KITS

BD101K-07800-SS






HARDWARE


Barn Door Hardware Stock Accessories

TRACK JOINER KIT STAINLESS STEEL $14 061-012TRACK JOINER KIT MATT BLACK 8 061-012BARN DOOR LATCH STAINLESS STEEL 25 061-012BARN DOOR LATCH MATT BLACK 18 061-012BARN DOOR HANDLE STAINLESS STEEL $41 061-012BARN DOOR HANDLE MATTE BLACK 28 061-012FLUSH PULL STAINLESS STEEL 44 061-012FLUSH PULL MATTE BLACK 31 061-012

BD460-SSBD460-MB

BD125-SSBD125-MBBD250-SSBD250-MBBD450-SSBD450-MB

ACCESSORIES






HARDWARE


BARN DOOR HARDWARE- INSTALLATION NOTES

DOOR SIZING

• 78-3/4" Kits will accommodate door widths up to approximately 36"- you loseapproximately 2" on each end of track because of the track stops right-angle design. (1)

• 96" Kits will accommodate doors up to approximately 46"- same situation as describedabove. (1)

• Door width should ideally be approximately 4" larger than finished opening. Door heightshould be approximately 2" larger than finished opening. This allows door to cover doorcasing (trim) and provides a better finished appearance and reduces light leakagearound door.

INSTALLATION

• Drywall installations require a full length 1x6 wood header applied to the wall surface,unless wall was framed with full length header prior to drywall. This header replaces topdoor trim piece {if using standard 80"height door). It also adds about%" additional wallstandoff. If particularly thick door casing is used, you may want to consider using 2x6header. The supplied Wall-Track Spacers (BD350) provide 1" track standoff from the wallalone.

BI-PARTING DOORS- SINGLE TRACK

• A 96" track kit will only accommodate two 24" doors in a bi-parting application with a44" finished opening. Any opening larger than approximately 44" will require 2complete kits. (1)

• Tracks must be centered on the opening.• Additional hardware components needed in addition to the door kit if using 2 doors:2 ea. Door Straps (hangers}1 pr. 80850 Track Stops1 pr. Anti-Jump Blocks1 ea. Door Guide {either 99161 wall mount guide set, or BD750 floor mount guide)4 ea. BD133 1-3/4" strap bolts (if 1-3/4" doors are used)






HARDWARE


BI-PARTING DOORS -TWO KITS

• For larger openings you can use 2 -78-3/4"or 96" kits joined in the center of theopening using the BD125 Track Joiner. All other parts are included in the kits tocomplete the installation.(1) Door Stops may need to be extended completely to the end of track in order toaccommodate maximum door width.

LONGER TRACK RUNS

• When you need additional door travel distance than what a single track can provide orwhen using doors larger than 46", you can add a second 96" track. Additional partsrequired:1 ea. BDS000-09600-xx Track6 ea. BD350-xx Wall Spacer6 ea. BD136-xx Bolt for Track Spacer1-3 ea. Additional Door Guides (either 99161 or BD750)

ADDITIONAL HARDWARE ACCESSORIES

BD250-xx Privacy LatchBD450-xx Bar Pull 6-7 /16"BD460-xx Rectangular Flush Pull 6-1/2"






HARDWARE


NON-STOCK- HARDWARE ACCESSORIES Special Order

ADD-A-DOOR KIT

BD400-100-SS STRAIGHT STRAP KIT STAINLESS STEEL $467 plus shippingBD400-100-MB STRAIGHT STRAP KIT MATT BLACK $298

BD400-100-SS TOP OF DOOR STRAP KIT STAINLESS STEEL $441BD400-100-MB TOP OF DOOR STRAP KIT MATT BLACK $284

BD400-100-SS BENT STRAP KIT STAINLESS STEEL $492BD400-100-MB BENT STRAP KIT MATT BLACK $313

SINGLE STRAP Supplied with mounting bolts for 1-3/8" DoorsBD550-SS STRAIGHT STRAP STAINLESS STEEL $179BD550-MB STRAIGHT STRAP MATT BLACK 109BD551-SS TOP OF DOOR STAINLESS STEEL 166BD551-MB TOP OF DOOR MATT BLACK 95BD552-SS BENT STRAP STAINLESS STEEL 192BD552-MB BENT STRAP MATT BLACK 120

EASY CLIPTM SOFT CLOSE HARDWARE

* Low profile attachment is concealed behind the track and does not affect the look of your hardware* Kit includes 2 Easy Clip Soft Close attachments for both ends of your track

to open and close quietly and effortlessly

* Installs in minutes to most flat track barn door kits* Mounts directly to your previously installed hardware* On 18" Biparting doors, the Easy Clip Mechanism can only be used to either soft open or soft close

Size selection is determined by door weight.BDF960-1020-MB 22 - 44 Lbs. $124BDF960-2040-MB 44 - 88 Lbs. 124BDF960-4060-MB 88 - 132 Lbs. 142BDF960-6085-MB 132 - 187 Lbs. 142

This hardware is designed to be mounted to the back of an existing Barn Door flat track. The left and right sided hardware are each mounted at the ends of the track to provide soft close and soft open operation of the door.

Provides Soft Close and soft-open operation

of the door

The items below are not stocked, but can be ordered to come in with stock shipments at no additionas freight.If needed faster we can quote for the order to

ship on it's own.

Set includes: pair of straps with 1-3/8" mounting bolts, left and right stoppers, set of Anit-Jump discs, and standard guide with alternate optional floor guides.





httpa:// NewOrleans.DykeDoors.com

Section 19 Page 1Effective: October 2018

SKYLIGHTS

DURA SERIES SFA Model

Super-Tough Lexan Double Dome.

Bronze over Clear.

Bronze Aluminum Self Flashed Frame.

MODEL ROOF OPENING LIST PRICE

SFA 2222 22-1/2 x 22-1/2 Special Order




CLASSIC SERIES FGC Model

Tempered Safety Glass.

Bronze Tint Insulated Safety Glass.

Bronze Aluminum Self Flashed Frame.

Special OrderMODEL ROOF OPENING

FGC 2525 22-1/2 x 22-1/2 Special Order

FGC 2549 22-1/2 x 46-1/2 Special Order




httpa:// NewOrleans.DykeDoors.com

Section 19 Page 2Effective: October 2018

SKYLIGHTS

This Page Blank



Documents

Fax 504-733-1848 Dyke ... · Woodfold Accordion Doors 7. Doors - Leaded Glass. 5 Exterior Door Units. Steel and Fiberglass 4-C. Exterior Door Units Wood. 4-B & 5 Fiberglass Columns