Upload
others
View
1
Download
0
Embed Size (px)
Citation preview
new : fast : secureBRIKKER : BRIKKER 90 Fa
sten
ers a
nd c
onne
ctio
n te
chno
logy
Qua
lity
you
can
rely
on
the-wire-man.com
On the following pages we present you a selection of our products in attachment technology.All approvals, advertisement texts, product information and our entire range canbe found at www.the-wire-man.de
WELCOME!
04 H&R product finder
06 BRIKKER
07 BRIKKER 90
08 Plug cavity wall tie FD-LDZ
PB wall connecting anchor MA-PB 15
09 MV Wall connector
MA wall connecting anchor
10 Cavity wall tie Well-L
Cavity screw anchor for wooden
underground
11 LDPE masonry damp-proofing
WDVS reinforcing fabric
12 Spring anchor galvanised
Wall anchor fixed
Winding wire
Collared plug, nylon
13 EURO-Clip
EURO-Clip, green
Clamping plate, plastic
03
H&R – the wire man. An owner-managed family business and that has been for decades.
For generations we have continually developed our products and adapted them for international markets and their differing require-ments. They are products that please us and our clients – through their quality and variety.
We ourselves develop and construct our production machines. This way we set a high quality standard as a European supplier. Made in Germany.
In the area of fasteners and connection technology for building we supply products for the most varied application areas and with the necessary approvals we also meet all technical requirements. And we are, of course, pleased that long-term partnerships with a lar-ge number of well-known commercial customers give confirmation of our service and our products.
We are happy to calculate special requirements according to your wishes and implement them for you – that is one of our principal ser-vices. This is of particular importance for us, to find the best solutions with and for our customers.
Our multilingual H&R Service Team is happy to be available to you for an individual consultation.
H&R Quality you can build on.
04 H&R product finder
06 BRIKKER
07 BRIKKER 90
08 Plug cavity wall tie FD-LDZ
PB wall connecting anchor MA-PB 15
09 MV Wall connector
MA wall connecting anchor
10 Cavity wall tie Well-L
Cavity screw anchor for wooden
underground
11 LDPE masonry damp-proofing
WDVS reinforcing fabric
12 Spring anchor galvanised
Wall anchor fixed
Winding wire
Collared plug, nylon
13 EURO-Clip
EURO-Clip, green
Clamping plate, plastic
04
FASTENERSHere you can find quickly and at a glance the appropriate fasteners for all rear masonries. Whether it‘s concrete, bricks or wood: Of course, we have not only the necessary anchors but also connectors, insulation fastenings and tools for your site.
Existing buildings
Concrete, unperforated solid bricks, solid limesand bricks
Plug cavity wall tieFD-LDZ
Standard Well no bending required
Well plug cavity wall tieFD-LDZ
Vertical coringbrick, aerated
concrete bricks& similar
Loop anchor withhexagon screw and
Fischer plug
Timberconstruction
Wood screw threadanchor
05
FOR A DURABLE CONNECTION
We take a good part of the work from you – with pre-fitted plug cavity wall ties just as with our BRIKKER, NEW in the range. Simple and fast to work. Quality you can build on.
New construction
Masonry with normal mortar
L-Form anchor
Standard Well no bending required
Well-L-Form anchor
Masonry with fine mortar
or normal mortar joints
BRIKKERBRIKKER 90
06
* With a shell distance over 250 mm or below 90 mm, installation in Germany is possible only with building-authority approval in the individual case.*² The permitted shell distances can differ for fine mortar and normal mortar joints in the facing brick shell. Please observe the approval!
Article-No. Model Dimension Shell distance up to PU
200240 BRIKKER 240 4,5 x 240 110 mm 250200260 BRIKKER 260 4,5 x 260 120 mm 250200280 BRIKKER 280 4,5 x 280 140 mm 250200300 BRIKKER 300 4,5 x 300 160 mm 250200320 BRIKKER 320 4,5 x 320 175 mm 250
201320 BRIKKER Plus 320 6,2 x 320 180 mm *² 250201340 BRIKKER Plus 340 6,2 x 340 200 mm *² 250201360 BRIKKER Plus 360 6,2 x 360 220 mm *² 250201380 BRIKKER Plus 380 6,2 x 380 240 mm *² 250201400 BRIKKER Plus 400 6,2 x 400 250 mm *² 250201420 BRIKKER Plus 420 6,2 x 420 280 mm * 250201440 BRIKKER Plus 440 6,2 x 440 300 mm * 250201460 BRIKKER Plus 460 6,2 x 460 320 mm * 250201480 BRIKKER Plus 480 6,2 x 480 340 mm * 250201500 BRIKKER Plus 500 6,2 x 500 360 mm * 250
BRIKKER [special cavity wall tie for fine mortar and normal mortar joints]
Thanks to the new production method, anchor lengths of up to 500 mm can be manufactured and special problems can be solved!
Of stainless steel W. No.: 1.4401, 1.4362, 1.4571 or 1.4404 to DIN EN 10088-2, for all the common stone-mortar combinations. Can be used in fine mortar and normal mortar joints. Can be used at building heights up to 25 m above ground and a shell distance of up to 250 mm. Due to the adapted end, a simplified application of the insulation is possible. The punctures in the flat area of the anchor enable a secure and firm hold in the mortar bed.
Building-authority approved by DIBT BerlinBRIKKER with shell distances up to 175 mm Z-17.1-1192BRIKKER Plus with shell distances up to 250 mm Z-17.1-1198
Installation with the seam upwards for BRIKKER, Brikker Plus and
H&R GmbHIserlohn
Z-17.1-1192
H&R GmbHIserlohn
Z-17.1-1198
H&R GmbHIserlohn
Z-17.1-1192
H&R GmbHIserlohn
Z-17.1-1192
H&R GmbHIserlohn
Z-17.1-1192
H&R GmbHIserlohn
Z-17.1-1192
H&R GmbHIserlohn
Z-17.1-1192
H&R GmbHIserlohn
Z-17.1-1198
H&R GmbHIserlohn
Z-17.1-1198
H&R GmbHIserlohn
Z-17.1-1198
H&R GmbHIserlohn
Z-17.1-1198
H&R GmbHIserlohn
Z-17.1-1198
07
The BRIKKER 90 and the BRIKKER 90 Plus are supplied already angled.This makes one processing step redundant, meaning unpack and install directly!With machine pre-angling, installation as approved is assured.
Applicable for all BRIKKER:Installation with seam upwards facilitates installation and reduces rejects.The optimised anchor end with „genuine“ and reinforced tip facilitates application of the insulation.With the optimised anchor head there is better grip on the mortar joint when placing.
BRIKKER 90 [special cavity wall tie for fine mortar and normal mortar joints]
Building-authority approved by DIBT BerlinBRIKKER 90 with shell distances up to 175 mm Z-17.1-1192BRIKKER 90 Plus with shell distances up to 250 mm Z-17.1-1198
87°
* With a shell distance over 250 mm or below 90 mm, installation in Germany is possible only with building-authority approval in the individual case.*² The permitted shell distances can differ for fine mortar and normal mortar joints in the facing brick shell. Please observe the approval!
EURO-Clip, green [Accessory for the BRIKKER Plus and the BRIKKER 90 Plus]
BRIKKER 90, BRIKKER 90 Plus building-authority approved!
H&R GmbHIserlohn
Z-17.1-1192
H&R GmbHIserlohn
Z-17.1-1198
Article-No. Model Dimension Shell distance up to PU
290240 BRIKKER90 240 4,5 x 240 110 mm 250290260 BRIKKER90 260 4,5 x 260 120 mm 250290280 BRIKKER90 280 4,5 x 280 140 mm 250290300 BRIKKER90 300 4,5 x 300 160 mm 250290320 BRIKKER90 320 4,5 x 320 175 mm 250
291320 BRIKKER90 PLUS 320 6,2 x 320 180 mm *² 250291340 BRIKKER90 PLUS 340 6,2 x 340 200 mm *² 250291360 BRIKKER90 PLUS 360 6,2 x 360 220 mm *² 250291380 BRIKKER90 PLUS 380 6,2 x 380 240 mm *² 250291400 BRIKKER90 PLUS 400 6,2 x 400 250 mm *² 250291420 BRIKKER90 PLUS 420 6,2 x 420 280 mm * 250291440 BRIKKER90 PLUS 440 6,2 x 440 300 mm * 250291460 BRIKKER90 PLUS 460 6,2 x 460 320 mm * 250291480 BRIKKER90 PLUS 480 6,2 x 480 340 mm * 250291500 BRIKKER90 PLUS 500 6,2 x 500 360 mm * 250
H&R GmbHIserlohn
Z-17.1-1192
H&R GmbHIserlohn
Z-17.1-1192
H&R GmbHIserlohn
Z-17.1-1192
H&R GmbHIserlohn
Z-17.1-1192
H&R GmbHIserlohn
Z-17.1-1192
H&R GmbHIserlohn
Z-17.1-1198
H&R GmbHIserlohn
Z-17.1-1198
H&R GmbHIserlohn
Z-17.1-1198
H&R GmbHIserlohn
Z-17.1-1198
H&R GmbHIserlohn
Z-17.1-1198
08
Plug cavity wall tie FD-LDZ
Building-authority approved by DIBT BerlinZ-17.1-822 for shell distances up to 200 mm /Z-21.2-1732, Z-17.1-1142 for shell distances up to 250 mm
Building-authority approved by DIBT Berlin Z-17.1-822/ Z-17.1-1142 for shell distances up to 250 mm / Z-21.2-1732 of stainless steel W. No.: 1.4401,1.4362 to DIN 17440 incl. nylon plug with round collar for 8 mm hole and drive-in tube, in the wall higher than 12 m above ground or with brickwork shell distance over 100 mm 4 mm wire anchors should be used, corrugation at the end of the anchor makes bending unnecessary
H&R GmbHIserlohn
Z-17.1-1142
H&R GmbHIserlohn
Z-17.1-822
H&R GmbHIserlohn
Z-21.2-1732
Article-No. Dimension Shell distance up to PU Items per pallet
01059 3 x 160 30 mm 250 24.50001060 3 x 180 50 mm 250 24.50001061 3 x 210 80 mm 250 24.50001056 3 x 250 100 mm 250 24.500
01062welle 4 x 210 80 mm 250 12.50001063welle 4 x 250 120 mm 250 12.50001064welle 4 x 275 145 mm 250 12.50001065welle 4 x 300 170 mm 250 12.50001255welle 4 x 320 190 mm 250 10.50001223welle 4 x 350 220 mm 250 10.50001224welle 4 x 400 250 mm 250 10.500
The plug cavity wall ties are pre-fitted.
Special lengths by requestActual anchor length = dimension minus 25 mm since the anchors are not bent more
Article-No. Model Dimension PU Items per pallet
01117 MA-PB 15 0,8 x 30 x 150 mm 100 12.50001117A2 MA-PB 15 0,8 x 30 x 150 mm 100 12.500
PB wall connecting anchor MA-PB 15 [for fine mortar or normal mortar joints]
of stainless steel W. No.: 1.4401, 1.4571, 1.4301 to DIN 17440,for use with wall connector rail system profiles HMS 25-15 - HTA 28/15
09
H&R GmbHIserlohn
Z-17.1-711
MV wall connector [butt joint flat anchor]
Building-authority approved by DIBT Berlin * Z-17.1-711
of stainless steel W. No.: 1.4401, 1.4362 to DIN 17440, for butt joint technology
Special lengths by request
Article-No. Model Dimension PU Items per pallet
242300 MV 300 300 x 20 x 0,7 mm 250 24.500242400 MV 400 400 x 20 x 0,7 mm 250 24.500
**
Article-No. Model Dimension PU Items per pallet
242200 MV 200/0,5 200 x 0,5 mm 250 24.500242300-0,50 MV 300/0,5 300 x 0,5 mm 250 24.500 *
For use in wall connector-rail systemswith profiles 25/15 – 28/15 and 38/17 in normal mortar
Available in hot-dip galvanised and stainless steel
MA wall connecting anchor
Article-No. Model Material Profile Dimension PU
01109 MA 85 hot-dip galvanised 25/15-28/15 85x25 mm 100
01110 MA 120 hot-dip galvanised 25/15-28/15 120x25 mm 100
01111 MA 180 hot-dip galvanised 25/15-28/15 180x25 mm 100
01109VA MA 85 Stainless steel 25/15-28/15 85x25 mm 100
01110VA MA 120 Stainless steel 25/15-28/15 120x25 mm 100
01111VA MA 180 Stainless steel 25/15-28/15 180x25 mm 100
01107 MA 120 hot-dip galvanised 38/17 120x30 mm 100
01108 MA 180 hot-dip galvanised 38/17 180x30 mm 100
01107VA MA 120 Stainless steel 38/17 120x30 mm 100
01108VA MA 180 Stainless steel 38/17 180x30 mm 100
10
Article-No. Dimension Shell distance up to PU Items per pallet
01066 3 x 180 70 mm 250 24.50001067 3 x 210 100 mm 250 24.50001068 4 x 190 75 mm 250 24.50001069 4 x 220 105 mm 250 24.50001070 4 x 260 145 mm 250 24.50001073 4 x 300 155 mm 250 24.50001074 4 x 320 185 mm 250 24.500
01075 4 x 340 200 mm 250 24.500
Cavity screw anchor for wooden undergroundBuilding-authority approved by DIBT Berlin Z-17.1-923 for shell distances up to 200 mm
of stainless steel W. no.: 1.4401, 1.4362 to DIN 17440, without pre-drilling and without fitting plugs, simply screw into the wood with drill-in-tool and drill, corrugation at end of anchor makes bending unnecessary
01072 Drill-in-tool for 3 + 4 mm anchors
H&R GmbHIserlohn
Z-17.1-923
Cavity wall tie Well-LBuilding-authority approved by DIBT Berlin Z-17.1-822 for shell distances up to 200 mm Z-17.1-1142 for shell distances up to 250 mm
of stainless steel W. No.: 1.4401, 1.4362 to DIN 17440, one side bent, one side corrugated; in the wall area over 12 m above ground or with brickwork shell distance over 100 mm 4 mm wire anchors should be used, corrugation at the end of the anchor makes bending unnecessary
Article-No. Dimension Shell distance up to PU Items per pallet
273 225 3 x 225 100 mm 250 24.500273 250 3 x 250 100 mm 250 24.500273 275 3 x 275 100 mm 250 24.500273 300 3 x 300 100 mm 250 24.500273 340 3 x 340 100 mm 250 24.500
274 250 4 x 250 125 mm 250 24.500274 275 4 x 275 150 mm 250 24.500274 300 4 x 300 175 mm 250 24.500274 340 4x 340 215 mm 250 24.500274 400 4 x 400 250 mm 250 24.500
H&R GmbHIserlohn
Z-17.1-1142
H&R GmbHIserlohn
Z-17.1-822
11
LDPE masonry damp-proofingBuilding-authority-approved PE masonry damp-proofing with 0.35 mm thickness against rising humidity in single-shell masonry.Non-slip profile for good connection to the masonry mortar.
Also available by request: PVC masonry damp-proofing and BITUV masonry damp-proofing (in all the usual sizes)
WDVS reinforcing fabricFor forming the surface reinforcement in the usual thermal insulation composite systems.The dressing ensures high alkali resistance of the fabric and is very slipping-resistant.
On request with private label
Our WDVS reinforcing fabric complies with the required tests to appendix C of ETAG – guideline 004
Article-No. Width Length Rolls per pallet
MPE 11525 11,5 cm 25 m 600MPE 17525 17,5 cm 25 m 360MPE 2425 24,0 cm 25 m 300MPE 3025 30,0 cm 25 m 240MPE 36525 36,5 cm 25 m 180MPE 5025 50,0 cm 25 m 120
Further widths and lengths by request
Article-No. Colour Dimension Width / length Quantity per pallet
WDVS160-08 yellow 160g/m² mesh size 4x4mm 100 cm / 50 m 30 rolls / 1500 sq mWDVS160-28 white 160g/m² mesh size 4x4mm 100 cm / 50 m 30 rolls / 1500 sq mWDVS160-02 blue 160g/m² mesh size 4x4mm 100 cm / 50 m 30 rolls / 1500 sq mWDVS160-19 red 160g/m² mesh size 4x4mm 100 cm / 50 m 30 rolls / 1500 sq mWDVS160-15 olive 160g/m² mesh size 4x4mm 100 cm / 50 m 30 rolls / 1500 sq m
12
Winding wire
Spring anchor galvanisedGalvanised anchors for the upper ceiling connection of non-load-bearing interior walls.The spring anchors are built into each butt joint and joined to the ceiling.
Wall anchor fixedAlso available in movable versionUpper wall connector for non-load-bearing interior walls
Article-No. Dimension Material PU
01115 60 x 1,25 mm Stainless steel 10001115VZ 60 x 1,25 mm Galvanised 100
Article-No. Dimension Material PU Items per pallet
neut1320 0,65 mm / 38 m galvanised 4 x 2,5 kg 1 t1321 0,65 mm / 38 m Stainless steel 4 x 2,5 kg 1 t
Winding wire, galvanised or stainless steel for mechanical fixing. In the area of technical insulation there are various usage possibilities for windingwire. Among other things the wire is suitable for long-term securing of unlaminated and aluminium-coated pipe shells and lamella mats or for support in fitting PVC welding foils.
100 g on wooden rod / 25 rolls in the carton / 4 neutral cartons in the box
Article-No. Dimension Material PU
01175 90 x 103 mm Galvanised 250
Nylon collared plug [not to DIN, 6 mm hole]
Article-No. Model PU Items per pallet
253350 50 mm, red,, für 3 mm anchor 40 x 250 250.000253450 50 mm, blue,, für 4 mm anchor 40 x 250 250.000
13
EURO-ClipSimple fixing with side fittingClamping plate with formed-on water draining disk ensures DIN-compliant fitting. For cavity wall ties of wire and flat rolled steel from 3.0 to 6.0 mm diameter. With holding bars on the rear for additional grip.
Article-No. Model PU Items per pallet
01194 EURO-Clip, blue 12 x 250 30.000
Clamping plate, plastic [for 3 + 4 mm anchors]
Article-No. Dimension PU Items per pallet
251000 60 mm Ø 12 x 250 75.000251090 90 mm Ø 250 30.000
60 mm Ø 90 mm Ø
Plastic plates for fixing mineral fibre insulation in combination with cavity wall ties. After the cavity wall tie is fixed in the masonry and the insulation applied, the clamping plate is pushed onto the cavity wall tie.
EURO-Clip, green [for BRIKKER Plus and BRIKKER 90 Plus]
Simple fixing with side fittingClamping plate with formed-on water draining disk ensures simple and DIN-compliant fitting. Ideal in combination with BRIKKER Plus and the BRIKKER 90 Plus cavity wall tie.
Article-No. Model PU Items per pallet
01194gruen EURO-Clip, green 12 x 250 30.000
14
WE ARE HAPPY TO ADVISE YOU
the-wire-man.comGet in touch with us. We are happy to be available to you for questions directly by telephone or by email. Of course, we can also arrange a personal appointment with you to discuss all questions and requirements.
Henning BartkowiakSales Fasteners
Tel +49 2371 95316-24Fax +49 2371 [email protected]
Jakob SchmidtSalesFasteners
Tel +49 2371 95316-30Fax +49 2371 [email protected]
15
fast : secure : BRIKKER
BRIKKER
: Special cavity wall tie for fine mortar and normal mortar joints
: Developed together with installers
: Building-authority approved by DIBT Berlin BRIKKER with shell distances up to 175 mm Z-17.1-1192 BRIKKER Plus with shell distances up to 250 mm Z-17.1-1198
: with the optimised anchor head there is better grip on the mortar joint when placing
: W.No.: 1.4401, 1.4362, 1.4571 or 1.4404 to DIN EN 10088-2
: New: Installation with the seam upwards, of course building-authority approved!
: no „pulling out“ from the joint when bending
: with the optimised anchor end, easier fitting of the insulation is ensured
Article-No. Model Dimension Shell distance up to PU
200240 BRIKKER 240 4,5 x 240 110 mm 250200260 BRIKKER 260 4,5 x 260 120 mm 250200280 BRIKKER 280 4,5 x 280 140 mm 250200300 BRIKKER 300 4,5 x 300 160 mm 250200320 BRIKKER 320 4,5 x 320 175 mm 250
201320 BRIKKER Plus 320 6,2 x 320 180 mm 250201340 BRIKKER Plus 340 6,2 x 340 200 mm 250201360 BRIKKER Plus 360 6,2 x 360 220 mm 250201380 BRIKKER Plus 380 6,2 x 380 240 mm 250201400 BRIKKER Plus 400 6,2 x 400 250 mm 250
H&R GmbH I Osemundstraße 4 I DE 58636 IserlohnFon +49 2371 95316 - 0 I Fax +49 2371 95316 - [email protected] I www.the-wire-man.com
length up to 500 mm
NEW : FAST : SECURE
THE BRIKKERAND THE BRIKKER 90