Upload
vandan
View
225
Download
1
Embed Size (px)
Citation preview
FALLSTOP® SAFETY Safety at all work places in heights and depths
EN / 2015
FALLSTOP® SAFETYMade-to-measure rope protection for industrial and commercial use.
BORNACK headquarters in Ilsfeld between Stuttgart and Heilbronn (Southern Germany)
A HARNESS SYSTEMS
8 Product details10 Harness overview12 Rescue harness FS DELTA13 Full body harness EASY14 Full body harness series STRIPE16 Full body harness FS3 CLICK17 Chest-sit harness combination
ATTACK WORKER18 Full body harness VISION19 Full body harness ENERGY20 Life-vest FS 2-3 MARITIME21 Survival suit CONTRA 140AS22 Hi-vis vest PROTECTION22 Rear D-ring extension TIE23 Shoulder pad KOMFORT24 Suspension trauma25 Vein protection pads V-PROTECT
B SECURING SYSTEMS
28 Multifunctional device LORY33 Pole lanyard BOA33 Pole lanyard MANUSTOP34 Securing device FALLSTOP® BK38 Securing device ROPSTOP
C ENERGY ABSORBERS
42 Energy absorber BFD44 Energy absorber MINI44 Energy absorber ELASTIC46 Energy absorber line PYTHON
D ABSEILING AND POSITIONING DEVICE
50 Abseiling and positioning device DRD60
51 Abseiling in and positioning device SPARROW200
E ROPES
54 Product details55 Information about using ropes56 Twisted rope PROFI56 Kernmantel rope PROFITEC57 Edge protection collar57 Edge protection bracket
F TAPE SLINGS, LANYARDS, ANCHOR SLINGS
60 Anchor sling SETP60 Anchor rope SETP61 Tape sling PROTEC61 Lanyard PROFI / PROFITEC61 Anchor sling PROFI / PROFITEC
G HEIGHT SECURING DEVICES
64 Height securing devices65 Height securing device REBEL65 Height securing device BLOCKSTOP
H KARABINERS, SAFETY HOOKS AND ACCESSORIES
70 Karabiners72 Safety hooks74 Hook clamp74 Anchor devices76 Telescopic hook77 Universal clamp GRIP
I RESCUE DEVICES
80 Rescue from an arrester system81 Abseiling rescue device SOLID84 Abseiling rescue device KE1085 Expansion set PLATFORM
J FALL ARRESTER SYSTEMS
88 Fall arrester systems89 Fall arrester RAILSTOP RS S0590 Ladder RAILSTOP RS91 Climbing aid G-CLIMBER92 Rope fall arrester system SSE
K MOBILE ANCHOR DEVICES
96 Door anchor TA11096 Bracing rope AK DA0197 Bracing rope LEOS0197 Fall-guard FENSTER
L ACCESS SECURING SYSTEMS AND TRIPODS
100 Tripod D-series101 Jib PM-series102 Polygonal support PM10102 Work seat103 Rescue chute PROMAN RR01104 Persons winch PM W104 Material winch PM MW105 Retractable type fall arrester
BLOCKSTOP
M EQUIPMENT SETS AND ROPE SETS
108 FALLSTOP® SET MINI108 FALLSTOP® SET BASIC109 FALLSTOP® SET SPEZIAL109 FALLSTOP® SET ASSEMBLY110 FALLSTOP® SET TELEKOM110 FALLSTOP® SET ENERGIE111 FALLSTOP® SETS SCAFFOLDING113 FALLSTOP® SETS ELEVATED WORK
PLATFORM
N CLOTHING AND ACESSORIES
116 Climbing gloves117 Climbing boots118 Overalls119 Function underwear119 Hi-vis vests120 Goggles121 Tool clips122 Headlamps and helmet lamps
O HELMETS
126 Helmets128 Helmet accessories
P TRANSPORT AND STORAGE
132 Transport boxes134 Tool bags135 Material rucksacks136 Load fastener LH100136 Storage packaging
137 Standards138 Made in Germany
Content
3FALLSTOP® SAFETY
Dear Ladies and Gentlemen,Dear Customer,
This catalogue is designed for users and decision-makers. It aims to provide an overview of the current state-of-the-art allowing you to select practical and safe rope protection equipment. This catalogue only contains the FALLSTOP® core program, i. e. an ex cerpt of BORNACK'S extensive products and services. Make use of the recognised competence of the BORNACK specialists to find a made-to-measure solution for your safety problem. Just contact us.A solution from BORNACK may involve suitable rope protection equipment or a risk analysis through to comprehensive supervi-sion of your elevated workplace by BORNACK's safety engineers.
PreventionThe FALLSTOP® SAFETY program is characterised by PREVENTION: the aim is to prevent fall accidents from the outset. This takes into account the special conditions of the workplace. The BORNACK motto for the past 50 years: We do not just alleviate falls, we prevent them from happening in the first place!
Integrated approachBORNACK quickly learned that effective protection can only be achieved at elevated workplaces by taking an integrated approach:• the right rope protection equipment • the right application to avoid dangerous errors • suitable attachment points
Based on this, BORNACK developed a future-oriented portfolio:
FALLSTOP® • FALLSTOP® SAFETY: Industry and business• FALLSTOP® RESCUE: Emergency service, fire service, police• FALLSTOP® ADVENTURE: Commercially run leisure activities• FALLSTOP® ROPE ACCESS: Free working in ropes
SAFEPOINT® • SAFEPOINT® SYSTEMS (anchorage equipment)• SAFEPOINT® INDUSTRY (anchorage equipment /
height access equipment)• SAFEPOINT® ARCHITECTURE (ropes & nets)
HOCHWERK® This training and event centre offers an ideal platform for safety-related events. Raise your own and the awareness of your employees for safety in your company in realistic simulations. The BORNACK team offers an extensive range of events, including safety exercises, application training courses, specialised semi-nars, in-house exhibitions through to personal development workshops.
• HOCHWERK® TRAINING: Training, coaching• HOCHWERK® SERVICE: Advice, inspection, repairs• HOCHWERK® EVENT: specialised seminars, in-house exhibitions,
team events
STAY ON TOP – the customer magazineThe BORNACK magazine keeps you up to date with new develop-ments in the market, amendments to standards and regulations, and contains articles about interesting solutions. It aims to inspire and motivate our customers and readers equally. We will be happy to include you in the mailing list and send you the latest issue. Or you can visit us at www.bornack.de to download this and previous issues.
The BORNACK team hopes that you and your employees “Stay on Top” and looks forward to hearing from you.
Yours, Klaus Bornack
STAY ON TOP – Securing and rescue at heights and depths
4FALLSTOP® SAFETYBORNACK GROUP
50 years BORNACK – a huge 5 x 5 m banner was installed using rope equipment at the company anniversary celebration in the HOCHWERK.
5FALLSTOP® SAFETYBORNACK GROUP
A 8 Product details10 Harness overview12 Rescue harness FS DELTA13 Full body harness EASY14 Full body harness series STRIPE16 Full body harness FS3 CLICK17 Chest-sit harness combination ATTACK WORKER18 Full body harness VISION19 Full body harness ENERGY20 Life-vest FS 2-3 MARITIME21 Survival suit CONTRA 140AS22 Hi-vis vest PROTECTION22 Rear D-ring extension TIE23 Shoulder pads KOMFORT24 Suspension trauma25 Vein protection pads V-PROTECT
6HARNESS SYSTEMS FALLSTOP® SAFETY
Harness Systems
7HARNESS SYSTEMS FALLSTOP® SAFETY
AH
ARNESS
SYSTEMS
Safety and ergonomics are the primary factors that define the quality of a safety harness.
The issue of ergonomics is not even anchored in the standards and is difficult to quantify. Even today, tests are only car-ried out with dummies. It is therefore all the more important that the harness developers have years of their own appli-cation experience and adopt a systematic and scientific approach and that they have a precise understanding of the user’s requirements. We have more than 20 years of experience in height assembly – we know what we are talking about!
Strength is not the only decisive factor, it is the ergonomics that set the limits in terms of the arresting forces exerted on the body when suspended, after a fall, or for every-day use. The potentially fatal orthostatic shock (suspension trauma) can only be alleviated by ergonomically optimised har-ness geometries and design details.
Ergonomics does not just entail padding. BORNACK harnesses are fitted with small carefully positioned padding elements and the harness is designed to fit the body effi-ciently.
Another important aspect when selecting harnesses is the way it is worn and locked into position with the buckles. Simple click-fasteners with frame parts are uncomplicated and robust. The conscious design of the BORNACK-click-fasteners facilitates a good grip and simple and fast connection. The new CLICK fasteners are even faster.
Depending on the design of the safety har-nesses with various attachment D-rings, it is suitable for • Rescuing• Arresting• Holding / positioning• Climbing
It is important that the safety harness can be correctly configured (adjusted) for the wearer and that the user maintains an upright, almost vertical position in the har-ness. It is essential to try out the harness before purchase and to receive instruction.Of course, we at BORNACK strive to not only ensure a good design, we also focus on material quality and state-of-the-art production techniques. Our customer consultants will be happy to tell you more. Please arrange an appoint-ment and ask our advice.
Design, material and quality
< The straps on the FALLSTOP® safety harnesses are processed on CNC-controlled sewing machines with a high level of quality and repetitive precision.
8FALLSTOP® SAFETYHARNESS SYSTEMS
The quality of a harness lies in the details.
Click-buckle
Positioning D-rings
EASY GLIDE buckle
Multifunctional D-ring (vertical fall-arrest system D-ring)
CLICK fastener
Material loops
Force-flow optimised seamsStrap-end fixation Label pouch
9FALLSTOP® SAFETY HARNESS SYSTEMS
AH
ARNESS
SYSTEMS
FS DELTA EASY STRIPE BASIC STRIPE BASICCLICK
STRIPE BASICCLICK LIGHT
ATTACHMENT POINTS
ADJUSTABILITY
Standards EN 1498-B EN 361 / 813 / 358 EN 361 EN 361 EN 361
On the side ×
Leg straps × × × × ×
Rear side × × × ×
Vertical leg straps
Art. Nº / sizes 1000632 / universal 1001762 / universal 1002866 / universal 1002867 / universal 1002868 / universal
Frontal × × × × ×
Chest strap × × × × ×Shoulder straps × × × ×
Arresting ••• ••• ••• •••Positioning •• • • •Lowering •• •• •• ••Vertical leg straps •• • •Restraint •• •• •• ••Rescue ••• ••• ••• ••• •••Lead climbing Abseiling Rigging
APPLICATION
× Detail available • Partially suitable •• Suitable ••• Highly suitable
TYPES
NEW
Abdominal belt ×
10FALLSTOP® SAFETYHARNESS SYSTEMS
ATTACHMENT POINTS
ADJUSTABILITY
EN 361 / 358 EN 361 / 358 EN 361 / 358 EN 361 / 358 EN 361 / 813 / 358 / 12277-A
EN 361 / 358 / 813 EN 361 / 358 / 813
× × × × × × ×
× × × × × ×
× × × × × ×
× × × × × × ×× ×
1002869 / universal 1002870 / universal 1002871 / universal 1002265 / S–XL 1000250 / S–M, M–XL
1001405 / XS–M, M–XL
1001415 / XS–M, M–XL
× × × × × × ×
× × × × × × ×× × × × × × ×
••• ••• ••• ••• ••• ••• •••••• ••• ••• •• ••• ••• ••••• •• •• •• ••• ••• •••••• ••• ••• • •• •• ••••• •• •• •• ••• •••••• ••• ••• ••• ••• •••
•• ••• ••• ••• •• ••• ••• ••• •• •••
APPLICATION
STRIPE COMFORT
STRIPE COMFORT CLICK
STRIPE COMFORT CLICK LIGHT
FS3 CLICK ATTACK WORKER
VISION ENERGY
NEWNEWNEW
11FALLSTOP® SAFETY HARNESS SYSTEMS
AH
ARNESS
SYSTEMS
Rescue harness FS DELTA
Rescue harness FS DELTAEN 1498-B Art. Nº 1000632
UseUniversal harness for rescuing persons. Highly suitable for inexperienced users, for third parties that are supervised or emergency rescue opera-tions.
The colour coding of the positioning loops allows simple and rapid adjust-ment to the body size. The harness used for abseiling does not need to be held onto until it is attached, thereby ensuring it is ready for use quickly when rescuing several persons (swing rappelling).
Product features• 3-level body size adjustment• Sturdy CORDURA® sit element, that is also highly suitable for abseiling
small persons (children)• Chest strap with 60 mm padding• Adjustable braces• Floats, meaning it can be put on easily in water • High visibility, even in poor light conditions• Colour: citro/black
Technical data• Weight: 640 g • Sizes: universal
Anchor points Front
Setting options
ApplicationRescue
Leg strapChest strap
12FALLSTOP® SAFETYHARNESS SYSTEMS
UseThe EASY full body harness is the starter model in the BORNACK harness series. It is suitable for occasional and brief use in exposed positions. The harness design has been reduced to the essentials.
It is adapted via the individually adjustable leg straps, shoulder straps and chest strap. The leg and shoulder straps ends are affixed with a special strap-end fixation. Once adjusted to size and affixed, the harness can be put on and taken off easily and quickly thanks to the buckles.
Product features• Front arresting loop• Rear D-ring• Positioning D-rings• Multifunction D-ring• Abdominal strap with hip pads• Label pouch• Strap-end fixation• 4 material loops• Click-buckle• Colour: grey/red
Accessories• HEART LIGHT karabiners (page 70)
Technical data• Weight: 1,440 g • Sizes: universal
Anchor pointsFront RearSide
Setting options
Full body harness EASY
ApplicationRescueRestraintArresting Lowering
Vertical fall-arrest systemPositioning
Full body harness EASYEN 361 / EN 358 / EN 813 Art. Nº 1001762
NEW
Shoulder strap
Abdominal strap Leg strapChest strap
13FALLSTOP® SAFETY HARNESS SYSTEMS
AH
ARNESS
SYSTEMS
Full body harness STRIPE BASIC
UseUniversal full body harness for all application situations. Specially designed to meet the requirements of the trade, the scaffolding industry, work on elevated platforms and the water sector.
Individual size adjustment of leg loops, shoulder straps and chest strap. The ends of the straps on the leg and shoulder straps can be secured by means of a special strap-end fixation. Once they are adjusted and fixed, the ergonomic harness can be put on easily and quickly thanks to the buckles.
Product features• Front D-ring• Rear D-ring• Label pouch• Strap-end fixation• Fastener variants: Buckle, stainless steel CLICK, aluminium CLICK• Colour: grey/red Accessories• HEART LIGHT karabiners (page 70)• V-PROTECT vein protection pads (page 25)
Technical data• Weight: STRIPE BASIC 950 g, STRIPE BASIC CLICK 1,100 g,
STRIPE BASIC CLICK LIGHT 1,000 g• Sizes: universal
Anchor points
Setting options
Full body harness STRIPE BASICEN 361 Art. NºSTRIPE BASIC Buckle 1002866STRIPE BASIC CLICK Stainless steel 1002867STRIPE BASIC CLICK LIGHT Alu 1002868
Stainless steel CLICK fastener Alu CLICK fastener
Click-buckle
ApplicationRescueRestraintArresting LoweringPositioning
Front Rear
Shoulder strap Leg strapChest strap
Vertical fall-arrest system
14FALLSTOP® SAFETYHARNESS SYSTEMS
UseUniversal full body harness for all application situations. Specially designed to meet the requirements of energy suppliers, offshore parks, telecommunications and the water sector. Very comfortable even when worn for long periods.
Individual size adjustment of leg loops, shoulder straps and chest strap. The ends of the straps on the leg and shoulder straps can be secured by means of a special strap-end fixation. Once they are adjusted and fixed, the ergonomic harness can be put on easily and quickly thanks to the buckles.
Product features• Front arresting loops• Rear arresting loop• Positioning D-rings• Multifunctional D-ring• Abdominal belt with ergonomic hip padding• Label pouch• Strap-end fixation• 6 material D-rings• Fastener variants: Buckle, stainless steel CLICK, aluminium CLICK• Colour: grey/red
Accessories• HEART LIGHT karabiners (page 70)• V-PROTECT vein protection pads (page 25)
Technical data• Weight: STRIPE COMFORT 1,980 g, STRIPE COMFORT CLICK 2,210 g,
STRIPE COMFORT CLICK LIGHT 1,860 g• Sizes: universal
Anchor points
Setting options
Full body harness STRIPE COMFORT
Full body harness STRIPE COMFORT EN 361 / EN 358 Art. NºSTRIPE COMFORT Buckle 1002869STRIPE COMFORT CLICK Stainless steel 1002870STRIPE COMFORT CLICK LIGHT Alu 1002871
Stainless steel CLICK fastener Strap-end fixation
ApplicationRescueRestraintArresting LoweringPositioning
Front RearSide
Shoulder strap
Abdominal strap Leg strapChest strap
Vertical fall-arrest system
15FALLSTOP® SAFETY HARNESS SYSTEMS
AH
ARNESS
SYSTEMS
Full body harness FS3 CLICK
Padded leg straps
Positioning D-ring
Central fastener
UseUniversal full body and rescue harness for all application situations.Extremely lightweight and with extraordinary ergonomic properties.Like the shoulder and leg straps, the horizontal all-round chest strap can be freely adjusted offering the body optimum support in all work posi-tions.
Product features• Rear D-ring• Side positioning D-rings at hip height for all-round anchoring• Harness strap in 2-colours for better orientation and visibility• Uncomplicated CLICK PRO fastener with integrated front D-ring• EASY GLIDE adjustment buckles for adjusting the length of the shoulder
straps and the all-round chest strap• Rubber rings for positioning the harness strap ends• Optional: FS3 CLICK with side positioning D-rings• Colour: citro/red
Accessories • V-PROTECT vein protection pads (page 25)
Technical data• Weight: 1,400 g • Sizes: S–XL
Anchor points
Setting options
ApplicationLead climbingRescueRestraintArresting LoweringPositioning Abseiling
Front RearSide
Shoulder strap Leg strapChest strap
Full body harness FS3 CLICKEN 361 / EN 358 Art. Nº 1002265_G030
NEW
Vertical fall-arrest system
THE ORIGINAL
16FALLSTOP® SAFETYHARNESS SYSTEMS
Side positioning Padded leg loops
Chest-sit harness combination ATTACK WORKER
ApplicationLead climbingArresting LoweringPositioning Abseiling
Front Side
Shoulder strap
Abdominal strapChest strap
Chest-sit harness combination ATTACK WORKEREN 361 / EN 813 / EN 358 / EN 12277-A Art. NºATTACK WORKER S–M 1000250_G033ATTACK WORKER M–XL 1000250_G031
UseUniversal harness that was specifically designed as a chest/sit harness combination to offer maximum functionality, safety and comfort even in extreme situations, e.g. free suspension with respiratory equipment.
The horizontal all-round chest strap offers optimum support to the upper body and can be steplessly adjusted like the shoulder straps. The 3-level attachment and anchor loop allows fast and easy combination of the chest and sit harness, and ensures optimum positioning and maximum support to prevent tilting or a slanted position.
Product features • 3-level attachment and anchor loop• Positioning D-rings can be simply folded back when not in use• Shoulder straps parallel at the front • Hip strap with symmetrical centring• High wearing and suspension comfort thanks to 80 mm wide thigh
pads• EASY GLIDE adjustment buckles• 3D-material loops with very high tear strength (> 200 kg)• High visibility even in poor light conditions • Colour: citro/black
Technical data• Weight: 1,410 g• Sizes: S–M, M–XL
Anchor points
Setting options
Leg strap
Vertical fall-arrest system
THE ORIGINAL
17FALLSTOP® SAFETY HARNESS SYSTEMS
AH
ARNESS
SYSTEMS
Full body harness VISION
Application
UseThe VISION harness is the first and only harness on the market that can be adjusted for various work situations such as walking, climbing and working in areas where there is a risk of falling. It can be perfectly adapt-ed to the body and therefore offers absolute comfort and safety in various situations.
Product features• Rear D-ring• Front D-ring• Positioning D-rings• Multifunction D-ring• Adjustable vertical leg straps for adjustment to various application
situations (climbing/squatting, walking/standing)• AIR COMFORT pads reduce heat build-up• Ergonomic hip and leg pads• EASY GLIDE adjustment buckles• CLICK fasteners• CLICK PRO fastener with integrated D-ring• CLICK T fasteners• Reflectors for better visibility• Label pouch• 2 material loops• Colour: red/black
Technical data• Weight: 2,750 g • Sizes: XS–M, M–XL
Anchor points
Setting options
Front RearSide
Shoulder strap Leg strapChest strap
Full body harness VISIONEN 361 / EN 358 / EN 813 Art. NºVISION XS–M 1001405_G033VISION M–XL 1001405_G031
Lead climbingRescueRestraintArresting LoweringPositioning Abseiling
Rigging
VerticalLeg straps
CLICK T distributes the forces ergonomically
CLICK PRO with integrated D-ring
NEW
Abdominal strap
THE ORIGINAL
18FALLSTOP® SAFETYHARNESS SYSTEMS
Vertical fall-arrest system
Full body harness ENERGY
Use Innovative harness design with ergonomic features for a wide range of uses. The vertical step sling of the ENERGY harness has a patented energy absorbing function. The energy absorber tape will rip on the vertical-fall- arresting D-ring during a fall and will shift to chest height to allow an ergonomic, upright suspension position. If the RS S05 vertical-fall-arresting runner is used, the load is also shifted to the sternal anchor point.This prevents the harness slipping to an uncomfortable position in case of a fall.
Product features• Rear D-ring• Front D-ring• Multifunction D-ring on the sit harness• Vertical step slip with a patented energy absorbing function• Positioning D-rings• Adjustable vertical leg straps for adjustment to various application
situations (climbing/squatting, walking/standing)• AIR COMFORT pads reduce heat build-up• Ergonomic hip and leg pads• EASY GLIDE adjustment buckles• CLICK fasteners• Reflectors for better visibility• Label pouch• 2 material loops• Colour: red/black
Technical data• Weight: 2,460 g • Sizes: XS–M, M–XL
Anchor points
Setting options
Front RearSide
Full body harness ENERGYEN 361 / EN 358 / EN 813 Art. NºENERGY XS–M 1001415_G033ENERGY M–XL 1001415_G031
ApplicationLead climbingRescueRestraintArresting LoweringPositioning Abseiling
Rigging
NEW
The harness can be set perfectly for every situation thanks to the adjustable vertical leg loops. Short if the user wants to work in an upright position and long for climbing, ascending and a raised position. Depending on the position, suspended or sitting, the anchor point at the front or rear is used.
Suspended Sitting
Shoulder strap Leg strapChest strap
VerticalLeg straps
Abdominal strap
THE ORIGINAL
19FALLSTOP® SAFETY HARNESS SYSTEMS
AH
ARNESS
SYSTEMS
Vertical fall-arrest system
Life-vestFS 2-3 MARITIME
UseLife-vest made of sturdy, seawater-resistant nylon material for operations above water even in extreme work situations. It can be put on quickly, is simple to operate and versatile. Velcro fasteners connect it with a full body harness.
Both securing elements have been tested and certified in accordance with the European Standard EN 399 and individually in accordance with other relevant standards. The life-vest is approved for use with the body harness FS 3 AVIAT and for the aviation industry. Also, the body harness FS 2-3 MARITIME is the only PPE system in the European market that meets the strict regulations of the US Coast Guards. BORNACK therefore closes a safety gap in the protective equipment for safe working above water.
Compatible full body harnesses• FS3 CLICK• FS3 AVIAT• FS4 T• STRIPE BASIC• STRIPE COMFORT
Product features• Suitable for people weighing between 40 kg and 120 kg and a chest size
of between 85 cm and 135 cm • Can be worn with both heavier, waterproof clothing or with dry rescue
suits • Automatic activation of the life-vest• Buoyant when inflated: 275 N• Buoyancy elements and protective cover are separate parts and can be
replaced if worn• Optional: manual automatic block• Colour: blue/orange
Accessories• Spare CO2 cartridge and trigger tablets can be ordered separately.
Technical data• Weight: 1,690 g • Sizes: universal
Life-vest FS 2-3 MARITIMEEN 399 Art. Nº 1000772
20FALLSTOP® SAFETYHARNESS SYSTEMS
Survival suitCONTRA 140AS
UseThe patented survival suit was specially designed for tough weather conditions and complicated work tasks at height close to water, the sea, coastal areas and inland lakes, and protects against undercooling and drowning.
The full body harness is worn below the suit and connected to the attached attachment D-ring via an integrated seawater-resistant stainless steel adapter. The inner rescue harness prevents air collecting in the suit extremities even when in the water, thereby ensuring the casualty main-tains an optimum position in the water. In combination with the match-ing life-vest, it ensures that the body lies flat in the water and the head remains above water.
The survival suit can be put on and taken off without having to remove the body harness. Its clever design allows enough freedom of movement whilst working, even when suspended in the harness.
Compatible full body harnesses• FS4 CONTRA• ENERGY CONTRA
Product features• Integrated attachment D-ring with integrated rescue sling• Integrated adapter to connect the full body harness and D-ring• Integrated detachable inner thermal suit• Outer suit: Waterproof membrane made of GORE-TEX 3-layer laminate• 2-finger fist glove• Reinforcements on the bottom, elbows and knees made of Kevlar fabric• Vented leg pockets• Waterproof sleeve pockets• Waterproof zip fasteners• Buddy line• Hood compatible to the work helmet• Integrated socks; normal shoes are worn • Reflection stripes• Isolation: Water temperature 0 °C 3.6 hours• Colour: citro
Accessories• ALPHA life-vest
Technical data• Weight: 4,300 g • Sizes: S, M, L, XL, XXL, XXXL
Survival suit CONTRA 140ASDIN ISO 15027-1 / SOLAS 7 Art. NºCONTRA 104AS S 1001764_G002CONTRA 104AS M 1001764_G003CONTRA 104AS L 1001764_G004CONTRA 104AS XL 1001764_G005CONTRA 104AS XXL 1001764_G006CONTRA 104AS XXXL 1001764_G007
Connection of the full body harness
THE ORIGINAL
21FALLSTOP® SAFETY HARNESS SYSTEMS
AH
ARNESS
SYSTEMS
UseSpecial hi-vis vest that is compatible with a full body and rescue harness. Openings for front two-part anchor loops and rear D-ring. Thanks to the easy-to-use fastener at chest height, the front D-ring is freely accessible.
Velcro fasteners on the inside make it possible to permanently attach the vest to the harness which helps when putting on the harness.
Product features• Colour: orange
Technical data• Weight: 300 g • Sizes: universal
UsePermanently attached to the rear D-ring of the full body harness, the rear D-ring extension TIE allows securing equipment to be easily attached when working scaffolds.
Product features• Colour: black
Technical data• Weight: 80 g • Sizes: 50 cm
Anchor points
Hi-vis vest PROTECTION EN 471 Art. Nº 1000891
Rear D-ring extension TIE Art. Nº 1001164
Hi-vis vestPROTECTION
Rear D-ring extensionTIE
Rear
22FALLSTOP® SAFETYHARNESS SYSTEMS
UseThe shoulder pad stops the shoulder straps rubbing the skin. It is attached below the shoulder straps with a Velcro fastener and its shape means that the full body harness can be put on like a jacket. Its feather-light spacing material prevents heat build-up below the pad ensuring absolute comfort.
Every full body harness from the FALLSTOP® range can be fitted (also retro-fitted) with the KOMFORT shoulder pad.
Product features• Colour: black
Technical data• Weight: 140 g • Sizes: universal
Shoulder pad KOMFORT Art. Nº 1000239
Shoulder padKOMFORT
THE ORIGINAL
23FALLSTOP® SAFETY HARNESS SYSTEMS
AH
ARNESS
SYSTEMS
Suspension trauma – potentially fatalHumans are not physically equipped to hang freely in ropes and harnesses, they are made to walk/climb and stand; and the blood circulation system, i.e. the sys-tem that supplies blood to vital organs, has been designed for this too. A so-called suspension trauma can develop more quickly or slowly depending on many fac-tors, such as physical condition and men-tal state, the ergonomic design of the full body harnesses etc.: blood collects in the legs, muscle pumps stop working and pinching by the harness causes the blood circulation to collapse etc.
For this reason, regulations governing res-cue concepts and equipment were drawn up to ensure that casualties are rescued from a potentially life-threatening sus-pension situation as quickly as possible!
Correct responseSince the beginning of the 1990s BORNACK has systematically addressed this issue, introduced rescue procedures and offered theoretical and practical training to persons who work at heights.
Simple tools are available that, if used correctly, can significantly reduce the effect of a suspension trauma.
The problem is serious, if the casualty is unconscious in his harness – possibly as a result of feeling ill or physical exertion. There is no way for an unconscious per-son to alleviate the suspension situation.
BORNACK vein protection padsV-PROTECTThe new protection pads V-PROTECT offer a unique opportunity to maintain blood circulation. The specially shaped V-PROTECT pads create a bridge over the vein near the leg straps and keep the veins free to transport blood. The blood pressure in the vein has dropped from approx. 136 mmhg to approx. 3.0 mmhg. Even tightly pulled leg straps during suspension can seriously impact on blood circulation.
The V-PROTECT therefore creates impor-tant time to rescue a casualty from a sus-pended position! Experience has shown that the suspension time can be prolon-ged by about 100 %.
V-PROTECT gives you more time and is a very inexpensive way to be safer! This applies in particular to full body harnes-ses in compliance with EN 361 when the rear D-ring is used.
We have decided to equip all our STRIPE harness series with V-PROTECT to take advantage of this extra safety feature and make it standard.
The suspension trauma
Veins and arteries in the ultrasound
V-PROTECT in the ultrasound test
The space provided by the V-PROTECT pads pre-vents pinching of the veins (blue) and the arteries (red).
24FALLSTOP® SAFETYHARNESS SYSTEMS
Vein protection pads V-PROTECT
Vein protection pads V-PROTECT Art. Nº 1001308
UseWorldwide patented protection against suspension trauma. It prevents impairment or even blockage of the blood circulation when a person hangs freely in a full body harness. The system comprises distance pads that are affixed to the leg straps above the veins to form a bridge. This sig-nificantly reduces the risk of a suspension trauma and is a great improve-ment on the ergonomic quality of a full body harness.
In particular, V-PROTECT works for unconscious persons who have been hurt after a fall or who have collapsed and are incapacitated and suspend-ed in the harness. Tests with the V-PROTECT have shown that the suspen-sion time in a full body harness can be extended by up to 50 to 100 %.
Compatible full body harnesses• STRIPE BASIC• STRIPE COMFORT
Always check the compatibility of the retrofit set for the various full body harness makes, as this depends on the design of the full body harness.
Product features• Colour: black
Technical data• Weight: 85 g• Sizes: universal
NEW
THE ORIGINAL
25FALLSTOP® SAFETY HARNESS SYSTEMS
AH
ARNESS
SYSTEMS
B28 Multifunction device LORY33 Lanyard BOA33 Lanyard MANUSTOP34 Securing device FALLSTOP® BK38 Securing device ROPSTOP
SECURING SYSTEMS 26FALLSTOP® SAFETY
Securing systems
SECURING SYSTEMS 27FALLSTOP® SAFETY
BSECU
RING
SYSTEM
S
Multifunctional securing device LORY
Small, handy and very versatile whilst also offering optimum safety!
Ergonomic design for easy handling with no 'catches'. The was the goal of the product development process and it has been achieved perfectly. In combination with modern and very high-performance kernmantel ropes, it is the securing device of the future.
'Arresting' a fall, 'positioning' and 'restraint', 'abseiling' and 'secur-ing the lead climber' are all functions offered by the LORY securing device. You will find various models in the catalogue, either for universal use or specific models for certain applications.
All LORY devices have the following special features:
Panic safety The control lever of the abseiling function has the DOUBLE-STOP function which means that the LORY goes into STOP mode, if the control lever is pulled excessively in the event of a panic reaction; the same also applies, if the control lever is released. This rules out the possibility of uncontrolled abseiling.
Very strong aluminium casing Aluminium casing with excellent properties even when used over edges.
Extreme life-span Very high wear-resistance thanks to rope guide and eccentric clamp made of stainless steel.
Can be openedThe devices can be opened or closed optionally. This allows easy replacement of the safety ropes and inspection of the inside of the device.
The only device on the market that satisfies all relevant standards for the above-mentioned functions. Suitable for tough everyday use.
28FALLSTOP® SAFETYSECURING SYSTEMS
Fall arrest / positioning system LORY
UseThe small and compact securing device for every situation and perfect prevention!
• Secure work on exposed places with overhead anchor points (ladders, scaffolds, ledges etc.)
• Restraint from the fall edge when working on flat roofs, platforms etc.• Positioning on the rope for standing support on suitable surfaces etc.• Safe arresting in the event of a fall and, if necessary, subsequent lower-
ing to safe ground
Product featuresThe system is permanently connected to its parts to ensure that all com-ponents are always completely connected.
• LORY STOP securing device• Tape energy absorber BFD with D SUPERSTRONG karabiners made of
steel, with TWISTLOCK PLUS fastener• LORY STOP safety rope11.0 mm static kernmantel rope, available in 5, 10,
15, 20, 30 m• Incl. DC SUPERSTRONG karabiners with TWISTLOCK PLUS fastener with
very strong sewn rope end connection• Colour: black/red
Accessories• Transport sack DRYPACK
Technical data• Weight: 1,350 g (device without hook and rope)) • Rope lengths: 5 m, 10 m, 15 m, 20 m, 30 m
Fall arrest / positioning system LORY STOP EN 353-2 Art. NºTyp LO/S01 1002738
LoweringPositioning Restraint
Application
THE ORIGINAL
29FALLSTOP® SAFETYSECURING SYSTEMS
AH
ARNESS
SYSTEMS
BSECU
RING
SYSTEM
S
Securing a lead climber LORY CLIMB
UseSecuring persons vertical climbing up a mast or a horizontal climb in areas where there is a risk of falling via a securing person, or secure following climbers. The person climbing is connected to the safety rope. During climbing, securing points are positioned using sharp edge-tested slings.
A 2nd trained person secures the climber and releases the rope in a con-trolled manner. This is facilitated by the special spring-controlled basic setting of the LORY CLIMB.
If the climber falls, the LORY CLIMB arrests the person's fall. The securing person can lower the person who has fallen in a safe manner without any additional equipment!
The equipment may only be used by trained personnel in compliance with an individual rescue plan.
Product featuresThe system is permanently connected to its parts to ensure that all com-ponents are always completely available.• LORY CLIMB securing device with D SUPERSTRONG karabiners with
TWISTLOCK PLUS fastener• LORY MULTI safety rope11.0 mm with BFD 01 with safety hook FS51• Colour: black/red
AccessoriesLORY CLIMB Type LO/C01 Securing the lead climber• SETP anchor slings for Anchor points and securing points• Transport sack DRYPACK
LORY CLIMB Typ LO/C02 Securing the lead climber followed by other persons• ROPSTOP03 with D SUPERSTRONG karabiners with TWISTLOCK PLUS
fastener• SETP-anchor slings for anchor points and securing points• Transport sack DRYPACK
Technical data• Weight: 1,170 g • Rope lengths: 20 m, 30 m
Securing the lead climber LORY CLIMBEN 353-2 / EN341-2A / EN 15151-1 / EN 2841-C Art. NºTyp LO/C01 1002739Typ LO/C02 with following climbers 1002740
Following
ApplicationLead climbing
LORY CLIMB Typ LO/C01 LORY CLIMB Typ LO/C02 Lead climbing with following climbers
30FALLSTOP® SAFETYSECURING SYSTEMS
Multifunction device LORY MULTI
UseThe versatile device for routine professional use – one device for everything.
Well-trained users can solve all situations on site with the LORY MULTI!Also ideal for rope-supported work.
The system comprises individual components that can be joined and combined as required.
Product features• LORY MULTI securing device• D SUPERSTRONG karabiners made of steel, with TWISTLOCK PLUS
fastener• BFD MINI• Colour: black/red
Accessories• LORY MULTI safety rope11.0 mm static• D SUPERSTRONG karabiners with TWISTLOCK PLUS fastener with sewn
very strong rope end connection
Technical data• Weight: 1,390 g • Rope lengths: 5 m, 10 m, 15 m, 20 m, 30 m
Multifunction device LORY MULTIEN 358 / EN 353-2 / EN 341- 2A / EN 12841-C Art. NºTyp LO/M01 1002737Typ LO/M02 1003564
ApplicationPositioningArresting Lowering Restraint Rescue Lead climbing Following
LORY MULTI Typ LO/M01 LORY MULTI Typ LO/M02
THE ORIGINAL
31FALLSTOP® SAFETYSECURING SYSTEMS
AH
ARNESS
SYSTEMS
BSECU
RING
SYSTEM
S
UseA third hand when working at heights!
Circular securing on lattice masts etc. leaving both hands free for working and enabling a secure and stable stance. One-strand anchoring to the central chest D-ring for positioning. This does not act as an arrester in the event of a fall!
Product featuresTo ensure that non of the components get lost, the system is combined with permanently attachments.
LORY HOLD Type LO/H01 • LORY HOLD securing device incl. D SUPERSTRONG karabiners made of
steel. Safety rope 11.0 mm static with rope protection and safety hooks FS51
• Colour: black/red
LORY HOLD Type LO/H/TL+ • LORY HOLD securing device incl. D SUPERSTRONG karabiners
made of steel. Safety rope 11.0 mm static with rope protection and DC SUPERSTRONG karabiners with TWISTLOCK PLUS fasteners permanently sewn-in
• Colour: black/red
Technical data• Weight: 920 g • Rope lengths: 5 m
Pole lanyard LORY HOLDEN 358 / EN 353-2 Art. NºType LO/H/01 1002742Type LO/H/TL+ 1002743
Pole lanyard LORY HOLD
Positioning
LORY HOLD Typ LO/H01
LORY HOLD Type LO/H/TL+
32FALLSTOP® SAFETYSECURING SYSTEMS
Pole lanyard BOAEN 358 Art. NºBOA 2.0 m 1000549_C200BOA 2.5 m 1000549_C250
UseIn combination with a body harness with positioning D-rings on the sides or a positioning belt, the BOA lanyard serves to secure persons working on wooden masts, concrete masts, steel tube masts or on trees.
In contrast to other previously used securing systems, the BOA lanyard sur-rounds the mast with its lanyard and the clamp-strap in an interlocking manner and tightens as loads are exerted. This guarantees a secure work position and arresting of the user in the event of slipping or a fall.
Product features• Rope shortening device MANUSTOP with snap hook• Kernmantel rope PROFITEC 12.0 mm• Clamp-strap with non-slip rubber coating• Safety hooks FS51 with very strong stitching• Colour: black/red Technical data• Weight: 1,158 g (2.0 m), 1,218 g (2.5 m) • Rope lengths: 2.0 m, 2.5 m• Mast Ø: min. 12.0 cm (top part) and max. 16.0 cm (lower part)
Pole lanyard MANUSTOP
Pole lanyard BOA
UseThe MANUSTOP lanyard is a proven tool for positioning when working at heights. Attached on both sides of the safety harness and slung in a U-shape around the construction element, it allows the user to work with both hands whilst maintaining a good and secure stance. Using the MANUSTOP rope shortening device allows the rope lengths to be adapted individually and steplessly to meet requirements. The special design allows single-handed length adjustment.
The MANUSTOP lanyards are equipped with a ring and a secured safety hook or a double snap-hook (snap) to facilitate secure but fast handling.
Product features• Rope shortening device MANUSTOP with a snap hook (Type: MS/S) or
with a ring (MS/R)• Kernmantel rope PROFITEC 16.0 mm or twisted rope PROFI 16.0 mm• Safety hooks FS51 with very strong stitching• Colour: black/red
Technical data• Weight: 1,200 g• Rope lengths: 1.5 m, 2.0 m Pole lanyard MANUSTOP
EN 358 Art. NºType MS/S/HOLD/PROFITEC16 1001156Type MS/R/HOLD/PROFITEC16 1001843Type MS/S/HOLD/PROFI 1000426Type MS/R/HOLD/PROFI 1000788
Positioning
Positioning
THE ORIGINAL
33FALLSTOP® SAFETYSECURING SYSTEMS
AH
ARNESS
SYSTEMS
BSECU
RING
SYSTEM
S
Securing device FALLSTOP® BK
The FALLSTOP® BK securing device is a product that has been con-tinuously further developed. It is one of the first rope shortening devices in the world that has proven its worth in more than 300,000 units. For more than 30 years it has set the standard and still does today.
Ergonomic and innovative design. The patent-protected safety functions are hidden inside.
Functions:• Easy maintenance-free mechanism without screws or springs• Very strong forged parts made of a special corrosion-resistant
aluminium alloy • Swivel lever for freehand control of the sliding function• Triple safety redundancy for triggering the blocking function:
rope friction + swivel lever + initial spring – each of these func-tions alone is sufficient to effect the arresting function
• Impact force absorption through defined rope friction between the specially formed clamping rings and the rope
The FALLSTOP® BK securing device is highly suitable for inexperi-enced users. Wrong operation is practically excluded. The device is tightly connected to the safety rope, it cannot be positioned on the rope the wrong way round and cannot be lost.
It has a permanently integrated energy absorber that cannot be deactivated during use.
34FALLSTOP® SAFETYSECURING SYSTEMS
35FALLSTOP® SAFETYSECURING SYSTEMS
AH
ARNESS
SYSTEMS
BSECU
RING
SYSTEM
S
UseThe versatile securing device FALLSTOP® BK stands out thanks to its sim-plicity. When ascending and descending the device slides at the same time. On roofs, the rope length adjustment feature manually positions the device. When taut, the rope brake clamps. In the event of a fall, the device arrests the person safely and limits the fall impact force to less than 6.0 kN. An additional energy absorber is not required.
After nearly 50 years in the product range, the FALLSTOP® BK has ben adapted to the latest requirements of the standard and a further model with an integrated panic lock has been developed.
Product featuresFALLSTOP® BK Type BK02• Securing device BK02• Kernmantel rope PROFITEC 12.0 mm, 16.0 mm with safety hooks FS51
and locking ball• Or twisted rope PROFI 16.0 mm• Colour: red
FALLSTOP® BK Type BK03 / PROFITEC• Securing device BK03 with panic lock• Kernmantel rope PROFITEC 12.0 mm or 16.0 mm with safety hooks FS51• Or twisted rope PROFI 16.0mm• Colour: red
Technical data• Weight: 1,940 g• Rope lengths: 5 m, 10 m, 15 m, 20 m, 30 m
Securing device FALLSTOP® BKEN 353-2 Art. NºType BK02/FS51/PROFI/FS51 1000585Type BK02/FS51/PROFITEC12/FS51 1000463Type BK03/FS51/PROFITEC/FS51 1003565
Securing deviceFALLSTOP® BK
PROFITEC 12
PROFI 16
ApplicationPositioningArresting Restraint
THE ORIGINAL
36FALLSTOP® SAFETYSECURING SYSTEMS
UseThe versatile securing device FALLSTOP® BK stands out thanks to its sim-plicity. When ascending and descending the device slides at the same time. On roofs, the rope length adjustment feature manually positions the device. When taut, the rope brake clamps. In the event of a fall, the device arrests the person safely and limits the fall impact force to less than 6.0 kN. An additional energy absorber is not required.
These versions were specially adapted to the needs of energy providers. Equipped with a hook clamp, the safety rope can be anchored to almost any structure.
Product featuresFALLSTOP® BK Type BK/EVU/PROFITEC16/FS90• Securing device BK02 with connecting lanyard and FS51SG• Kernmantel rope PROFITEC 16.0 mm with hook clamp FS90 and locking
ball• Colour: red
FALLSTOP® BK Type BK/EVU/PROFI16/FS92• Securing device BK02 with lanyard and FS51SG• PROFI 16.0 mm with hook clamp FS92 and locking ball• Colour: red
Technical data• Weight: 3,230 g• Rope lengths: 3 m, 5 m, 10 m, 15 m
PositioningArresting Restraint
Securing device FALLSTOP® BK EVUEN 353-2 Art. NºType BK/EVU/PROFITEC16/FS90 1000628Type BK/EVU/PROFI16/FS92 1001278
Securing device FALLSTOP® BK EVU
Application
PROFITEC 12
PROFI 16
37FALLSTOP® SAFETYSECURING SYSTEMS
AH
ARNESS
SYSTEMS
BSECU
RING
SYSTEM
S
Securing device ROPSTOP
The perfect securing device for permanent professional use and use in extreme conditions (weather, dirt etc.).
The device is hinged and can be placed or removed anywhere along the rope. This means it is possible to combine the device with various rope lengths or persons one after another to allow climbing on a taut climbing rope. The ROPSTOP03 can be used on both twisted ropes and kernmantel ropes.
The fastener mechanism is secured in a unique fashion: twin-lock bayonet fastener that can be operated quickly and easily with just one hand. The ROPSTOP device locks automatically to close. No additional screw locks that could be forgotten.
Safety: In the event of a fall, an eccentric tappet clamps the secur-ing rope and arrests the user safely. Ergonomics: A separate tape energy absorber limits the impact force and thereby minimises the risk of injury. The tape energy absorber can be integrated as a connection between the arrester device and arrester D-ring on the body harness or in the mounts of the guide rope.
38FALLSTOP® SAFETYSECURING SYSTEMS
Lead climbing
Securing device ROPSTOP03 with tape energy absorberEN 353-2 Art. NºROPSTOP Typ ROP3BFD/FS51 1000821Rope PROFI/FS51 1001238Rope PROFITEC12/FS51 1000822
Securing device ROPSTOP03EN 353-2 Art. NºROPSTOP03 with ring 1000485ROPSTOP03 with rope 1001232Rope PROFI 1001234Rope PROFITEC12 1000820
UseThe guided-type fall arrester ROPSTOP is very suitable for climbing e.g. on masts, ladders etc.
Product featuresROPSTOP Type ROP3 / PROFITEC / BFD• Securing device ROPSTOP03• Kernmantel rope PROFITEC 12.0 mm or 16.0 mm equipped with BFD01
with safety hooks FS51• Colour: silver/white
ROPSTOP Type ROP3 / PROFI / BFD• Securing device ROPSTOP03• Kernmantel rope PROFI 16.0 mm equipped with BFD01 with safety hooks
FS51• Colour: silver/white
Technical data• Weight: 500 g (device without hook and rope) • Rope lengths: 5 m, 10 m, 15 m, 20 m, 25 m, 30 m
UseThe guided-type fall arrester ROPSTOP is highly suitable for horizontal use (e.g. on flat roofs, platforms etc.).
Thanks to the tape energy absorber on the fall arrester, it also allows the user to work in dangerous areas, e.g. on edges. Despite the fact that it has been tested for use over edges, an edge protector should be used.
Product featuresROPSTOP Type ROP3BFD/PROFITEC/BFD• Securing device ROPSTOP03 with BFD• Kernmantel rope PROFITEC 12.0 mm or 16.0 mm equipped with safety
hooks FS51• Colour: silver/white
ROPSTOP Type ROP3BFD/PROFI/BFD• Securing device ROPSTOP03 with BFD• Kernmantel rope PROFI 16.0 mm with safety hooks FS51• Colour: silver/white
Technical data• Weight: 1,075 g (device without rope) • Rope lengths: 3 m, 4 m, 5 m, 6 m, 8 m, 10 m, 15 m, 20 m
PositioningArresting
Arresting Restraint
Securing device ROPSTOP03
Securing device ROPSTOP03 with tape energy absorber
THE ORIGINAL
39FALLSTOP® SAFETYSECURING SYSTEMS
AH
ARNESS
SYSTEMS
BSECU
RING
SYSTEM
S
42 Energy absorber BFD44 Energy absorber MINI44 Energy absorber ELASTIC46 Energy absorber line PYTHONC
ENERGY ABSORBERS 40FALLSTOP® SAFETY
Energy absorbers
ENERGY ABSORBERS 41FALLSTOP® SAFETY
CEN
ERGY
ABSORBERS
Energy absorber BFD01
Energy absorber BFD01EN 355 Art. NºType BFD01/FS51 1000416
UseEnergy absorbers have become state-of-the-art. They regulate the intensi-ty of the fall impact during a fall and absorb it to a physiologically accept-able level up to a limit value of maximum 6 kN.
Product features• Tape energy absorber in a compact protective sheath • FS51 safety hooks• Loop for attachment of lanyards• Colour: black
Technical data• Weight: 230 g
Arresting
Energy absorber with lanyard BFD01 ROPE Y
UseFor continuous securing of movements on ladders (vertical ladders with-out vertical fall-arrest-system, lattice masts etc.) or horizontal in steel constructions (lattice mast jibs, steel constructions etc.). Optionally, always 1 safety hook is anchored to the construction. This means that attachment points for bracing rope or pipes can also be passed.
Product features• BFD01 tape energy absorber with safety hooks FS51• 2 connecting ropes made of kernmantel rope BORNACK PROFITEC 12 mm• Safety hooks hook clamp FS90 or similar• Colour: black
Technical data• Weight: 230 g • Rope lengths: 1.0 m, 1.5 m, 2.0 m
Energy absorber with lanyard BFD01 ROPE YEN 358 / EN 353-2 / EN 341- 2A / EN 12841-C Art. Nº Type BFD01RY/FS51/FS90 1000931Type BFD01RY/DLIGHT/TL+/FS90 1001168
Arresting Restraint Lead climbing
THE ORIGINAL
THE ORIGINAL
42FALLSTOP® SAFETYENERGY ABSORBERS
Energy absorber with lanyard BFD01 ROPEEN 355 / EN 354 Art. NºType BFD01R/PROFITEC/FS51/FS90 1000248Type BFD01R/PROFITEC/FS51/FS51 1000818Type BFD01R/PROFI/FS51/FS90 1000819
UseFor securing in areas with a risk of falling with low action radius. The ropes are tested and approved for horizontal use and over edges. Steps must be taken to prevent cut injuries.
Product featuresTo ensure that non of the components get lost, the system is combined with permanently attachments.
BFD01 ROPE Type BFD01R/PROFITEC • BFD01 tape energy absorber with safety hooks FS51• Connecting rope made of kernmantel rope BORNACK PROFITEC 12 mm• Optionally with safety hooks FS51 or hook clamp FS90• Colour: black
BFD01 ROPE Type BFD01R/PROFI • BFD01 tape energy absorber with safety hooks FS51• Connecting rope made of twisted rope BORNACK PROFI 16 mm• Safety hooks hook clamp FS90• Colour: black
Energy absorber with lanyard BFD01 ROPE
Arresting Restraint
Technical data• Weight: 230 g (device without hook and rope) • Rope lengths: 1.0 m, 1.5 m, 2.0 m
THE ORIGINAL
43FALLSTOP® SAFETYENERGY ABSORBERS
AH
ARNESS
SYSTEMS
CEN
ERGY
ABSORBERS
BSECU
RING
SYSTEM
S
Energy absorber with lanyard ELASTIC
Energy absorber MINI
UseThe new generation of tape energy absorbers. Packed very compactly, the BFD MINI can be combined with securing devices and systems making a very comfortable solution.
Product features• Tape energy absorber • Bag made of sturdy CORDURA®• Colour: black
Technische Details• Weight: 176 g
Use For securing in areas with a risk of falling with low action radius (e.g. window cleaner, climbing from vertical fall-arrest-system equipment on platforms, use of attachment equipment with bracing ropes etc.).
The elastic harness strap lanyard makes handling very easy. Equipped with FS90 safety hooks with an opening width of up to 55 mm, the ELASTIC tape energy absorber can be attached to almost any structure with a lanyard.
Product features• MINI tape energy absorber with TWISTLOCK PLUS karabiners• Elastic lanyard• Hook clamp FS90• Colour: black
Technical data• Weight: 995 g• Rope length: 1.8 m
Energy absorber MINIEN 355 Art. Nº 1001575
Energy absorber with lanyard ELASTICEN 354 / EN 355 Art. NºType E/DCLIGHT/FS90 1001573
Arresting
Restraint Positioning
NEW
NEW
44FALLSTOP® SAFETYENERGY ABSORBERS
Energy absorber withlanyard ELASTIC Y
UseFor continuous securing of movements on ladders (vertical ladders with-out vertical fall-arrest-system, lattice masts etc.) or horizontally in steel constructions (lattice mast jibs, steel constructions etc.). Optionally, always 1 safety hook is anchored to the construction. This means that attachment points for bracing rope or pipes can also be passed. The elas-tic harness strap lanyard makes handling very easy. Equipped with FS90 safety hooks with an opening width of up to 55 mm, the ELASTIC tape energy absorber can be attached to almost any structure with a lanyard.
Product features• MINI tape energy absorber with SWIVEL karabiners• 2 elastic lanyards• Hook clamp FS90• Colour: black
Technische Details• Weight: 1.340 g• Rope length: 1.8 m
Energy absorber with lanyard ELASTIC YEN 354 / EN 355 Art. NºType EY/SWIVEL/FS90 1001574Type EY/DCLIGHT/FS90 1002330
RestraintLead climbing Positioning
NEW
ENHANCED PERFORMANCE
45FALLSTOP® SAFETYENERGY ABSORBERS
AH
ARNESS
SYSTEMS
CEN
ERGY
ABSORBERS
BSECU
RING
SYSTEM
S
Energy absorber line PYTHON
In a systematic development process, BORNACK studied the previ-ously known fall arresting technologies and further optimised all tolerance values. After many trials on the test stand and practical exercises, a completely new product was created: The shock absorber line PYTHON.
The shock force is no longer absorbed via the very heavily influ-enced rope friction or the ripping of a strap/seam. In the PYTHON system, the shock is absorbed by converting the energy across the entire length of the shock absorber line! This means it is possible to make this product very compact and handy..
The 10 user benefits of the PYTHON: 1. Shortening of the braking path by around 33 % = shorter
arresting path. This means that the rope protection can also be used even at lower working heights.
2. Low impact force, optimum absorption curve across the entire braking path.
3. Static strength of the overall product 22.0 kN.4. Very high energy absorption capacity: A PYTHON P02 achieves
absorption outputs for up to 3 consecutive falls. This is the greatest safety reserve for the rescue or the return after a fall.
5. Tested and certified for horizontal use and for edge loads.6. Easy handling: No annoying energy absorber package, instead
it is slim across the entire length. 7. No textile parts that are sensitive to climatic conditions such
as Dyneema or untreated fibres made polyethylene. Therefore no irreversible change caused by contact heat (attachment to heating pipes etc.) or longer storage periods in places where heat can accumulate (containers, cars etc.).
8. Fall load is easily recognisable to inexperienced users. 9. Y-shaped shock absorber lines with 2 strands can be used
without limitation in terms of strength or use.10. Attachment point encircled with the shock absorber line is
possible without limitation.
46FALLSTOP® SAFETYENERGY ABSORBERS
UseUsed as a fall-arrest-system when working in exposed situations (e.g. securing when window cleaning, climbing from vertical fall-arrest-system equipment on rooftops etc.). Ideally suited for use in rough operating con-ditions with large mechanical loads.
The energy absorber line PYTHON P02 stands out thanks to its innovative arresting method. The shock force is no longer absorbed via the very heav-ily influenced rope friction or the ripping of a strap/seam. In the PYTHON P02 (system), the shock is absorbed by converting the energy across the entire length of the shock absorber line! This means it is possible to make this product very compact and handy!
It has been possible to reduce the brake path by approx. 33 % leading to a shorter arresting path; also the rope protection can be used even at lower working heights. Normal fall 100 kg, fall factor 2.
Product features• Special energy-absorbing woven material • Safety hooks FS51• Optionally safety hooks FS51 or hook clamp FS90• Colour: black/yellow
Technical data• Weight mit FS90: 900 g, 1,015 g, 1,130 g • Rope lengths: 1.0 m, 1.5 m, 2.0 m
Energy absorber line PYTHON P02EN 355 Art. NºType P02/51/90 1.0 m 1000135_C100Type P02/51/90 1.5 m 1000135_C150 Type P02/51/90 2.0 m 1000135_C200
Energy absorber linePYTHON P02
Positioning
THE ORIGINAL
ENHANCED PERFORMANCE
47FALLSTOP® SAFETYENERGY ABSORBERS
AH
ARNESS
SYSTEMS
CEN
ERGY
ABSORBERS
BSECU
RING
SYSTEM
S
50 Abseiling and positioning device DRD6051 Abseiling and positioning device SPARROW200D
ABSEILING AND POSITIONING DEVICE 48FALLSTOP® SAFETY
Abseiling andpositioning device
ABSEILING AND POSITIONING DEVICE 49FALLSTOP® SAFETY
D ABSEILIN
G /
POSITIO
NIN
G
DEVICE
Abseiling and positioning device DRD60EN 341-A Art. Nº 1000771
UseThe abseiling and positioning device DRD60 is a unique patented system with many useful benefits.
In contrast to other devices, it works with a double rope and therefore has an integrated redundancy function. Loads are distributed equally across both ropes and therefore only need to bear half the load. In the event of an accident (failure of one of the ropes) the remaining, already taut, rope assumes the function on the shortest arresting path. This eliminates larg-er arresting paths caused by rope expansion and reaction paths! In the case of longer rope lengths, arresting paths of up to 10 m are prevented.
The device is easy to use and can also be used safely by less experienced persons thanks to the double-stop function. If necessary, both ropes can be controlled individually, making it possible to pass vertical areas (right/left outside the perpendicular). It is also possible to pass rope connection points (extensions).
Product features• Double-Stop function• Two separate brake levers, can also be connected• Redundant safety thanks to double rope• Special karabiners with inverse opening mechanism and fastener lock
Accessories• BORNACK PROFITEC 12.0 mm kernmantel rope• Other rope types on request• Colour: black
Technical data• Weight: 90 g (device without hook and rope)
ApplicationRescueLoweringPositioning
Abseiling and positioning device DRD60
THE ORIGINAL
ENHANCED PERFORMANCE
50FALLSTOP® SAFETYABSEILING AND POSITIONING DEVICE
Abseiling and positioning device SPARROW200EN 341:2011-2A / EN 12841:2006-C Art. Nº 1000972
Abseiling and positioning device SPARROW200
UseMultifunctional abseiling and positioning device when working in rope equipment, intervention and rescue.
Ideal abseiling device, especially for situations in which a large number of people need to be lowered, e.g. rescue from a rope track. This handy device can be used for a number of applications, both in active and also passive mode. The unusually high allowed abseiling load on single ropes in compliance with EN 341:2011 means that up to two persons can be lowered at the same time over heights of up to max. 180 m.
The SPARROW200 has a permanently integrated additional rope deflector cam that can also be enabled to control the abseiling speed more precise-ly, in particular in the case of heavy loads. The SPARROW200 offers lots of additional possibilities as a backstop, e.g. when ascending in rope equip-ment, when installing taut rope systems, and lots more.
Product features• Sensitive control lever• Double-Stop function• Additional rope deflector cam• Colour: black/orange
Technical data• Weight: 520 g (device without hook and rope) • Useful load: 250 kg
ApplicationRescueLoweringPositioning
SPARROW200 closed SPARROW200 open
ENHANCED PERFORMANCE
51FALLSTOP® SAFETYABSEILING AND POSITIONING DEVICE
D ABSEILIN
G /
POSITIO
NIN
G
DEVICE
AH
ARNESS
SYSTEMS
CEN
ERGY
ABSORBERS
BSECU
RING
SYSTEM
S
54 Product details55 Information on the use of ropes56 Twisted rope PROFI56 Kernmantel rope PROFITEC57 Edge protection collar57 Edge protection bracketE
ROPES 52FALLSTOP® SAFETY
Ropes
ROPES 53FALLSTOP® SAFETY
ERO
PES
Rope equipment The craft of rope-making is ancient and is still of paramount importance today for securing ropes, even though nowadays new materials and production techniques are used. The use of technical equipment such as abseiling devices, rope-shortening devices and energy absorbers require pre-cise quality and tolerances if you as a user want safety and functional properties throughout the service life of the product.And this does not come cheaply.
The BORNACK rope technologies The most important BORNACK equipment can be supplied with various rope types:• The classic twisted securing rope
BORNACK PROFI.• The modern kernmantel securing rope
BORNACK PROFITEC.
Rope end connections All our ropes are equipped with safety hooks and with integrated rope end con-nections.
PROFI This is the proven mature 30-year old clas-sic product among our ropes. Produced by a German rope factory to exact specifica-tions provided by BORNACK for precise tol-erances and quality. At the same time we always retain proven aspects – the FALLSTOP® ropes from BORNACK still have 4 strands instead of just 3.
PROFITEC technologyDue to their construction, high quality kernmantel ropes cannot be spliced.Therefore they have always been knotted, which is associated with the risk of strength losses and manipulation by unauthorised parties. For this case, BORNACK has devel-oped a puncture sewing procedure that allows extremely strong stitching:• High strength of over 39 kN (knotted approx. 29 kN).• High level of protection against damage to the seam (over 70 % of the thread lies hidden inside the rope).• No sources of error caused by wrong han-dling by the user.• The PROFITEC end connection is also pro-tected by a transparent protection cap.
PROFITEC The properties of kernmantel rope designs may vary: low-stretch static ropes through to high-energy dynamic ropes. We have selected a very high-performance kern-mantel rope for the FALLSTOP® SAFETY product range – the PROFITEC 12.0 mm.The mantel protects the load-bearing rope core and allows recognition of tolerance values of mechanical damage and facili-tates handling.
The rope end connections are still always equipped with a splice produced in crafts-manship quality. This task is assumed by a third generation rope-maker master craftsman at BORNACK.
Rope stitching PROFITEC
PROFITEC with transparent protective cap
Rope end connection PROFI with splice
Ropes
Kernmantel rope PROFITEC Twisted rope PROFI
ROPES 54FALLSTOP® SAFETY
Horizontal use of rope protectionIf possible, the attachment points for securing ropes or height securing devices should always lie above the user. This pre-vents longer fall paths and higher fall ener-gy from being exerted. Rope protection can therefore be preventive = precautionary. Ideally as a retention system (no free fall possible). This also solves the problem of rescuing a colleague who has fallen from the rope protection.
However, overhead attachment points are not always available. For example, when working on roofs etc., the attachment points are near the feet. This means: longer fall paths (2 – 3 m free fall), and deflection of the securing rope over an edge.
Approval according to EN 353-2 is inade-quate as this test is only vertical. In the case of short connecting ropes between the body harness and arrester device, only small fall paths of approx. 30 to 50 cm are tested; however, fall attenuation according to EN 355 is required. All FALLSTOP® prod-ucts from BORNACK have met these strict requirements for over 25 years. Today an addition test 'horizontal use' is being dis-cussed for the EN 353-2 standard.
The sharp edgeFalls over edges should be avoided. In extreme cases, the edge can be very sharp. This always poses a risk for the rope and danger in general. Only edge-tested secur-ing ropes should be used. Use edge protec-tion or rope protection.
All BORNACK ropes of the PROFITEC and PROFI series with the associated arrester devices and energy absorbers have passed the horizontal test and have been approved accordingly.
In a systematic series of trials involving 40 fall tests, none of the BORNACK products failed. These tests were carried out by the reputed neutral testing institute DMT (now DEKRA EXAM).
Explanation:A 'sharp edge' within the meaning of the standard draft and tests is a steel profile with an edge radius of R = 0.5 mm.
If you are interested, you will find more details in our HOCHWERK® training, devel-opment and event centre in Marbach / Neckar.
Information on the use of ropes
ROPES 55FALLSTOP® SAFETY
AH
ARNESS
SYSTEMS
ERO
PESC
ENERG
Y ABSO
RBERSB
SECURIN
G
SYSTEMS
D ABSEILIN
G /
POSITIO
NIN
G
DEVICE
Twisted rope PROFI
Kernmantel rope PROFITEC
Twisted rope PROFI Art. Nº 1000075
Kernmantel rope PROFITEC Art. Nº 1000246
UseThe classic rope product. The 16 mm thick twisted rope made of high-quality polyamide.
Product features• Spliced rope end connection• 4 strands
Technical data• Colour: white• Weight: 15.3 kg / 100 m• Diameter 16.0 mm
UseVery high-performance kernmantel rope. The sheath protects the sup-porting core from wear and dirt.
Product features• Sewn rope end connection in the BORNACK-puncture stitch• 12.0 or 16.0 mm available• Colour: white, orange
Technical data• Weight: 8.4 kg / 100 m• Strength: over 39 kN• Diameter 11.0 mm, 12.0 mm, 16.0 mm
ROPES
THE ORIGINAL
THE ORIGINAL
56FALLSTOP® SAFETY
Edge protection collar
Edge protection bracket
Edge protection collar Art. Nº 1000941
Edge protection bracket Art. Nº2 guide brackets 10007064 guide brackets 1000826
UseFriction protection for passive fixed ropes. The attachable protection col-lar protects the securing rope in the hazardous area (on contact with parts). The additional affixing clamp secures the collar to prevent it slip-ping.
Product features• Extremely wear-resistant, tightly-woven PES protection fabric• Velcro fastener• Affixation clamp• Matching rope diameter: 9−16 mm• Length: 1.0 m• Colour: black
Technical data• Weight: 136 g
UseSuitable for application areas, especially when ropes are used for lowering or lifting. The steel plate bracket is positioned below the rope lying on sharp-edged parts on the building (roof edges etc.) and is secured with the spare line. The rings hold the rope in place.
Product features• Stainless steel plate• Large edge radius• Extremely smooth, rope-protecting surface• With 4 or 2 guide brackets for up to 3 ropes• Colour: metall
Technical data• Weight: 750 g
Edge protection collar in use
ROPES
AH
ARNESS
SYSTEMS
ERO
PESC
ENERG
Y ABSO
RBERSB
SECURIN
G
SYSTEMS
D ABSEILIN
G /
POSITIO
NIN
G
DEVICE
57FALLSTOP® SAFETY
60 Anchor sling SETP60 Anchor rope SETP 61 Tape sling PROTEC61 Lanyard PROFI / PROFITEC61 Anchor sling PROFI / PROFITECF
TAPE SLINGS, LANYARDS, ANCHOR SLINGS 58FALLSTOP® SAFETY
Tape slings,lanyards,anchor slings
TAPE SLINGS, LANYARDS, ANCHOR SLINGS 59FALLSTOP® SAFETY
F SLINGS + LANYARDS
Anchor sling SETPEN 795-B / EN 354 Art. NºTYPE TL+ 1000690TYPE SV 1000280
Anchor rope SETPEN 795-B / EN 354 Art. Nº 1000661
Anchor sling SETP
Anchor rope SETP
UseExtremely sturdy and with a special protection technology to protect against all potentially damaging influences. This makes SETPs suitable for heavy-duty use (temporary securing during lead climbing, deflection point or anchor point); they can also be used on sharp-edged steel profiles or pipes in chemical plants.
Product features• Polyester sheath to protect against mechanical wear and UV • Kevlar sheath against cut damage (sharp edge tested)• Neoprene coat to prevent chemical impact• Round slings with sewn-in steel karabiner• Protection against the effect of high temperatures• Breaking load: 27 kN (requirement of the standard 10.0 kN)• Useful length models: 75 cm, 135 cm, 200 cm• Colour: white
UseSETP anchor equipment is extremely sturdy and with a special protection technology to protect against all potentially damaging influences. This makes SETPs suitable for heavy-duty use (temporary securing during lead climbing, deflection point or anchor point); they can also be used on sharp-edged steel profiles or pipes in chemical plants.
Product features• Polyester sheath to protect against mechanical wear and UV • Kevlar sheath against cut damage (sharp edge tested)• Neoprene coat to prevent chemical impact• Anchor rope with 50 mm round steel ring and steel delta ring• Protection against the effect of high temperatures• Breaking load: 27 kN (requirement of the standard 10.0 kN)• Useful length models: 100 cm, 150 cm, 200 cm• Colour: white
Technical data• Weight: 576 g
Technical data• Weight: 514 g
SETP-TECHNOLOGY
SETP-TECHNOLOGY
ENHANCED PERFORMANCE
60FALLSTOP® SAFETYTAPE SLINGS, LANYARDS, ANCHOR SLINGS
Anchor sling PROFI / PROFITEC Art. NºAnchor sling PROFI16 1001018Anchor sling PROFITEC12 1000853
Lanyard PROFI / PROFITECEN 354 Art. NºLanyard PROFI 1000942Lanyard PROFITEC 1000823
Tape sling PROTECEN 566 / EN 354 / EN 795 Art. Nº PROTEC red 1000612PROTEC white 1000612PROTEC olive 1000612
Tape sling PROTEC
Lanyard PROFI / PROFITEC
Anchor sling PROFI / PROFITEC
UseModern and sturdy safety ropes. Can be used in rope protection systems as connectors or anchor equipment.
Product features• Steel safety hooks FS51• Thimble (rope variants)
Rope variants• PROFI: twisted rope 16 mm with spliced end connection• PROFITEC: kernmantel rope 12 mm or 16 mm with very strong BORNACK
sewn rope end • Rope lengths: 10 m, 15 m, 20 m, 25 m
UseModern and sturdy safety ropes. Can be used in rope protection systems as connectors or anchor equipment.
Product features• With a thimble on both sides
Rope variants• PROFI: twisted rope 16 mm with spliced end connection• PROFITEC: kernmantel rope 12 mm or 16 mm with very strong BORNACK
sewn rope ends• Rope lengths: 1.0 m, 1.5 m, 2.0 m
UseTape sling made of very strong and sturdy 25 mm polyamide webbing.Can be combined individually with various karabiners and rope rolls.
Product features• Material: polyamide• Breaking load: 27 kN• Length variants: 50 cm, 60 cm, 70 cm, 80 cm, 90 cm, 100 cm, 110 cm,
120 cm, 130 cm, 140 cm• Colours: red, white, olive
61FALLSTOP® SAFETYTAPE SLINGS, LANYARDS, ANCHOR SLINGS
AH
ARNESS
SYSTEMS
ERO
PESC
ENERG
Y ABSO
RBERSB
SECURIN
G
SYSTEMS
F SLINGS + LANYARDS
D ABSEILIN
G /
POSITIO
NIN
G
DEVICE
64 Retractable type fall arresters65 Retractable type fall arrester REBEL65 Retractable type fall arrester BLOCKSTOPG
RETRACTABLE TYPE FALL ARRESTERS 62FALLSTOP® SAFETY
Retractable type fall arresters
RETRACTABLE TYPE FALL ARRESTERS 63FALLSTOP® SAFETY
G RETRACTABLE TYPE FALL ARRESTERS
Retractable type fall arresters allow great freedom of movement and are therefore used as lanyards if movements need to be secured with as little limitation as possible. They may not be used over bulk goods or other media into which it is possible to sink!
Like seat belts in cars, the lanyard can be pulled out of the hous-ing and blocked if jerked (pull-out speed greater than approx. 1.5 m/s).
A spring keeps the lanyard taut. When retracted, the retractable type fall arrester automatically winds up the lanyard again to prevent slack. In the case of a fall, the device blocks and arrests the user. An integrated energy absorber system with a slip clutch limits the fall impact to less than 6.0 kN.
Use• Stationary maintenance work on road and rail vehicles: the
retractable type fall arrester remains permanently attached to a rail guide.
• Horizontal movements, e.g. transport of material on a flat roof or an unsecured platform.
• Vertical movements, e.g. climbing on steel constructions• Redundant backup for special requirements.• Regular maintenance work on / above machine parts • Securing in high-rack warehouses.
Retractable type fall arresters
For more retractable type fall arresters, please refer to ourBrochure 'Retractable type fall arresters IKAR' or our web-site
64FALLSTOP® SAFETYRETRACTABLE TYPE FALL ARRESTERS
Retractable type fall arrester BLOCKSTOP RIGGAEN 360 Art. NºType BSRIGGA/10.2 1001025Type BSRIGGA/15.0 1000380
Retractable type fall arrester REBELEN 360 Art. NºREBEL 3.0 m Harness strap 1000832_M003REBEL 6.0 m Harness strap 1000832_M006REBEL 4.5 m Wire cable 1000152_C450
Retractable type fall arrester REBEL
Retractable type fall arresterBLOCKSTOP RIGGA
UseRetractable type fall arrester with weight-optimised plastic casing with ergonomic handle. Very strong zinc-plated special wire rope and centrifu-gal lock with slip coupling or with textile strap with sewn end connection and safety hook.
Product features• Optionally with harness strap or wire rope• Safety karabiner
Technical data• Weight: 2,290 g• Rope lengths: 3.0 m, 6.0 m, 4.5 m
UseVery sturdy and durable retractable type fall arrester with steel rope and D-ring with SWIVEL. Thick-walled aluminium casing with milled sealing surfaces to prevent dirt getting in. It is also suitable for the tough condi-tions prevailing on building sites.
Product features• Swivel attachment• Sturdy aluminium housing• Wire cable aluminium galvanised
Technical data• Weight: 6.54 kg• Rope lengths: 10.0 m, 15.0 m
65FALLSTOP® SAFETYRETRACTABLE TYPE FALL ARRESTERS
AH
ARNESS
SYSTEMS
ERO
PESC
ENERG
Y ABSO
RBERSG
RETRACTABLE TYPE FALL ARRESTERS
BSECU
RING
SYSTEM
SF
SLINGS + LANYARDS
D ABSEILIN
G /
POSITIO
NIN
G
DEVICE
Retractable type fall arrester BLOCKSTOP IKA
Retractable type fall arrester BLOCKSTOP MINI
UseVery sturdy and durable retractable type fall arrester with steel rope and D-ring with SWIVEL. Thick-walled aluminium casing with milled sealing surfaces to prevent dirt getting in. It is also suitable for the tough condi-tions prevailing on building sites.
Product features• Tape energy absorber • Retractable type fall arrester with SWIVEL and TWISTLOCK PLUS karabiners• Colour: black
Technical data• Weight: 1.1 kg• Rope Length: 1.65 m• User Weight: 100 kg
UseExtremely compact and lightweight retractable type fall arrester with har-ness strap and swivel attachment. Specially developed for securing per-sons in mobile work cages. The BLOCKSTOP IKA stands out thanks to its very low force transfer into the anchor points of less than 3 kN in the event of a fall. The BLOCKSTOP IKA is also approved fro loads over an edge (R ≥ 0.5) also in combination with a harness strap extension to the full body harness of max. 40 cm. The selected anchor point must be 40 cm below the handrail of the work cage.
Product features• High-quality aluminium housing• Swivel attachment• Safety karabiner• Colour: red
Technical data• Weight: 0.96 kg• Rope Length: 1.8 m• Impact force: only 3.0 kN
Retractable type fall arrester BLOCKSTOP MINI Art. Nº 1000650
Retractable type fall arrester BLOCKSTOP IKAEN 360 / CNB 11.060 2008 Typ A Art. NºType BSIKA/1.8 1000643
NEW
THE ORIGINAL
THE ORIGINAL
66FALLSTOP® SAFETYRETRACTABLE TYPE FALL ARRESTERS
Retractable type fall arrester BLOCKSTOP HUBEN 360 / EN 1496 Art. Nº 1000242
Retractable type fall arrester BLOCKSTOP RIGGA HUBEN 360 Art. Nº 1001779
Retractable type fall arrester BLOCKSTOP RIGGA HUB
Retractable type fall arrester BLOCKSTOP HUB
UseRetractable type fall arrester with integrated rescue device. In addition to fall protection, this device also offers the opportunity to lift a person hanging the rope. Very suitable for navigating shafts and tanks.
Product features• Sturdy aluminium housing• Wire cable galvanised steel• Rescue lift function
AccessoriesAttachment bracket for die PROMAN tripod D300 and D1000
Technical data• Weight: 9.5 kg• Rope Length: 18.0 m
UseRetractable type fall arrester with integrated rescue device. In addition to fall protection, this device also offers the opportunity to lift a person hanging the rope. Very suitable for navigating shafts and tanks.
Product features• Swivel attachment• Sturdy aluminium housing• Steel cable
Technical data• Weight: 10.2 kg• Rope Length: 15.0 m
67FALLSTOP® SAFETYRETRACTABLE TYPE FALL ARRESTERS
AH
ARNESS
SYSTEMS
ERO
PESC
ENERG
Y ABSO
RBERSG
RETRACTABLE TYPE FALL ARRESTERS
BSECU
RING
SYSTEM
SF
SLINGS + LANYARDS
D ABSEILIN
G /
POSITIO
NIN
G
DEVICE
70 Karabiners72 Safety hooks74 Hook clamp75 Anchor devices76 Telescopic hook78 Universal clamp GRIPH
KARABINERS, SAFETY HOOKS AND ACCESSORIES 68FALLSTOP® SAFETY
Karabiners,safety hooksand accessories
KARABINERS, SAFETY HOOKS AND ACCESSORIES 69FALLSTOP® SAFETY
H KARABIN
ERS, SAFETY HO
OKS,
ACCESSORIES
Handy rustproof stainless steel karabiner. On request, also with twist-lock.Version: V4A Stainless steel
Breaking load (3-σ values): closed: 22 kN, open: 12 kN, transverse: 12 kN
ApplicationAll application areas with a severe risk of corrosion e.g. in maritime areas.
Fastener variants• Screw fastener• TWISTLOCK fastener
Special hook with TWISTLOCK PLUS fastener. Ideal for attachment to two-part front arresting loops. Special heart shape prevents the karabiner slipping.
Model: Aluminium, anodisedOpening diameter: 22 mm
Fastener variants•TWISTLOCK PLUS fastener
Karabiners D STRONG EN 362 Art. NºType DSTRONG/SV 1000837_V001Type DSTRONG/TL 1000837_V002
Karabiners HEART LIGHT EN 362 Art. Nº 1000253
Karabiners D STRONG
Karabiners HEART LIGHT
105
mm
52 mm
110
mm
72 mm
THE ORIGINAL
CORROSION-RESISTANT
70FALLSTOP® SAFETYKARABINERS, SAFETY HOOKS AND ACCESSORIES
Very easy to operate, inexpensive steel karabiner, with careful finish. Qual-ity screw fastener, no cheap parts.
Version: steel, galvanisedBreaking load (3-σ values): closed: 25 kN, open: 12 kN, transverse: 12 kNOpening diameter: 18 mm
ApplicationFor combining individual rope protection components to securing sys-tems that are ready for use.
OVAL karabinerEN 362 Art. Nº 1000321
Handy, very easy to operate, very strong steel karabiner, with extraordinar-ily careful finish. Karabiner eye allows twist-proof attachment and non-detachable integration into the securing ropes.
Version: very strong steel, galvanisedBreaking load (3-σ values): closed: 45 kN, open: 25 kN, transverse: 25 kNOpening diameter: 19 mmFastener variants: screw fastener SV, TWISTLOCK fastener TL,TWISTLOCK PLUS fastener TL+
ApplicationFor special strict requirements in terms of strength. Standard karabiner in air rescue.
Karabiner DC SUPERSTRONGEN 362 Art. NºType DCSUPERSTRONG/SV 1000284_V001Type DCSUPERSTRONG/TL 1000284_V002Type DCSUPERSTRONG/TL+ 1000284_V003
OVAL karabiner
Karabiner DC SUPERSTRONG
104
mm
56 mm
131 m
m
73 mm
THE ORIGINAL
71FALLSTOP® SAFETYKARABINERS, SAFETY HOOKS AND ACCESSORIES
AH
ARNESS
SYSTEMS
ERO
PESC
ENERG
Y ABSO
RBERSG
RETRACTABLE TYPE FALL ARRESTERS
BSECU
RING
SYSTEM
SF
SLINGS + LANYARDS
D ABSEILIN
G /
POSITIO
NIN
G
DEVICE
H KARABIN
ERS, SAFETY HO
OKS,
ACCESSORIES
Safety hook for one-hand operation. Automatically secured lock.Optional: additional with screw lock (triple security)
Version: steel, nickel-platedBreaking strength: 23 kNOpening diameter: 20 mm
Safety hook FS51EN 362 Art. Nº Safety hook FS51 1000122additional screw lock 1000028
Safety hook for one-hand operation. Automatically secured lock. The larg-er version allows easy one-hand operation even when wearing gloves. Suitable for anchoring to crampons.
Version: steel, nickel-platedBreaking load: 26 kNOpening diameter: 23 mm
Safety hook FS51
Safety hook FS61
Safety hook FS61EN 362 Art. Nº 1000834
130
mm
56 mm
181 m
m
75 mm
THE ORIGINAL
72FALLSTOP® SAFETYKARABINERS, SAFETY HOOKS AND ACCESSORIES
Safety hook for one-hand operation. Automatically secured lock. Smooth- running swivel element to compensate rope twist etc.
Version: steel, forged, nickel-platedBreaking load: 25 kNOpening diameter: 15 mm
Safety hook for one-hand operation. Automatically secured lock. Smooth- running swivel element to compensate rope twist etc. Also safety hooks with swivel elements are very easy to operate even when wearing thick gloves.
Version: aluminium, steel nickel-plated, very high-quality finish.Breaking load: 20 kNOpening diameter: 33 mm
Safety hook FS70
Safety hook FS43
Safety hook FS70EN 362 Art. Nº 1000079
Safety hook FS43EN 362 Art. Nº 1000835
156
mm
47 mm
235
mm
78 mm
THE ORIGINAL
73FALLSTOP® SAFETYKARABINERS, SAFETY HOOKS AND ACCESSORIES
AH
ARNESS
SYSTEMS
ERO
PESC
ENERG
Y ABSO
RBERSG
RETRACTABLE TYPE FALL ARRESTERS
BSECU
RING
SYSTEM
SF
SLINGS + LANYARDS
D ABSEILIN
G /
POSITIO
NIN
G
DEVICE
H KARABIN
ERS, SAFETY HO
OKS,
ACCESSORIES
Pipe/scaffold hook FS90EN 362 Art. Nº 1000076
190
mm
110 mm
330
mm
154 mm
Safety hooks for one-hand operation. Automatically secured lock.Very easy to operate safety hooks with extreme opening width, for anchoring to pipes and steel profiles.
Version: steel, nickel-platedBreaking load: 22 kNOpening diameter: 88 mm
Surprisingly strong but very lightweight. The GREIFFIX achieves this effect thanks to the fact that it creates a positive interlock around the anchor point. Highly suitable for scaffold or pipe installation builders but also anywhere else where large round parts are available. One-hand operation even when wearing gloves.
Version: Very strong special spring steel Breaking load: over 33 kNOpening diameter: 88 –140 mm
Pipe/scaffold hook FS90
Hook clamp FS92
Anchor device GREIFFIX
Hook clamp FS92EN 362 Art. Nº 1000481
Anchor device GREIFFIXEN 362 Art. NºGREIFFIX ∅ 80 1000836GREIFFIX ∅ 100 1000824GREIFFIX ∅ 140 1000825
Safety hooks for one-hand operation. Automatically secured lock. Very easy to operate safety hooks with large opening width, highly suited for anchoring to scaffold pipes etc. Very good bending resistance and very strong thanks to high-quality steel material, however very lightweight.
Version: steel, forged, nickel-platedBreaking load: 22 kNOpening diameter: 55 mm
THE ORIGINAL
74FALLSTOP® SAFETYKARABINERS, SAFETY HOOKS AND ACCESSORIES
Self-locking safety hook. Unlocked via an auxiliary line. Operated with a very light aluminium telescopic pole. The FS90-hook is inserted into the telescopic pole with an adapter; the pole can be removed once the hook has been positioned. To remove the telescopic pole can be inserted into the adapter again from the ground. The aluminium telescopic pole can be adjusted in a grid of 20 cm from 2.0 to 3.8 m.
VersionThe anchor device MC01 is available in 3 diameters or as a kit.Opening widths: 50 mm, 125 mm, 250 mm
Anchor devic MC01 Art. NºAnchor devic MC01 50 mm 1000839Anchor devic MC01 120 mm 1000840Anchor devic MC01 250 mm 1000841 Anchor devic MC01 Set 1000938Telescopic pole MC01 1000827Spare line for MC01, 8 m, in small pouch 1000937
Anchor devic MC01
THE ORIGINAL
75FALLSTOP® SAFETYKARABINERS, SAFETY HOOKS AND ACCESSORIES
AH
ARNESS
SYSTEMS
ERO
PESC
ENERG
Y ABSO
RBERSG
RETRACTABLE TYPE FALL ARRESTERS
BSECU
RING
SYSTEM
SF
SLINGS + LANYARDS
D ABSEILIN
G /
POSITIO
NIN
G
DEVICE
H KARABIN
ERS, SAFETY HO
OKS,
ACCESSORIES
Self-locking safety hook. Unlocked via an auxiliary line. Operated with a very light aluminium telescopic pole. The FS90-hook is inserted into the telescopic pole with an adapter; the pole can be removed once the hook has been positioned. To remove the telescopic pole can be inserted into the adapter again from the ground.The aluminium telescopic pole can be adjusted in a grid of 20 cm from 2.0 to 3.8 m.
Telescopic hook FS92 See above, however with double-lock safety hooks with drawstring for unlocking.
Opening width: 55.0 mm (FS90), 85 mm (FS92)Breaking strength: 27.0 kN (FS90), 22.0 kN (FS92)
Telescopic hook RH120EN 362 Art. NºTelescopic hook RH120 with Adapter 1001041_V014Aluminium telescopic pole 1000779
Telescopic hook FS Art. NºTelescopic hook FS90 with Adapter 1001041_V011Telescopic hook FS92 with Adapter 1001041_V012Aluminium telescopic pole FS90/92 1000779
Self-locking safety hooks. Unlocked by relieving the strain and turning with the telescopic pole. Operated with a large and sturdy aluminium tel-escopic pole. The hook RH120 is inserted into the telescopic pole with an adapter.
Opening width RH120: 120 mmBreaking strength RH120: 22.0 kN
The aluminium telescopic pole can be steplessly extended with a clamp from 2.0 to 5.3 m. Transport length: 2.0 m
There is also an adapter available to allow the combination with the RH120 with insulated switch rods in the EVU field.
Telescopic hook FS90 / FS92
Telescopic hook RH120
FS92FS90 FS90 with telescopic pole
76FALLSTOP® SAFETYKARABINERS, SAFETY HOOKS AND ACCESSORIES
Universal clamp GRIP Art. NºEN 567, EN 795-B, CNB/9/11.115 1003397
GRIP PYTHON GRIP on kernmantel rope
GRIP on twisted rope PROFI GRIP on energy absorber for rescue
Universal clamp GRIP
UseStandard rope clamps are only suitable and approved for certain lanyards. The GRIP is the first device that can be used on almost all securing equip-ment, be it ropes, tape slings or tape energy absorbers.
The minimalistic design and simple construction facilitate handling, even in stress situations. When attaching the rope clamp, the rope of the res-cue system always remains attached, so that it is secured against falling at all times.
Product features• Material: aluminium• Clamp cam• Colour: black
Technical data• Max. useful load: 2 persons• Weight: 617 g
Suitable securing equipment/lanyard• Twisted ropes 16.0 mm• Kernmantel ropes 9.0–16.0 mm• Harness straps 10–50 mm wide• Ripped tape energy absorber fabric• Ripped or unstretched energy absorber fabric (e.g. PYTHON)
NEW
THE ORIGINAL
ENHANCED PERFORMANCE
77FALLSTOP® SAFETYKARABINERS, SAFETY HOOKS AND ACCESSORIES
AH
ARNESS
SYSTEMS
ERO
PESC
ENERG
Y ABSO
RBERSG
RETRACTABLE TYPE FALL ARRESTERS
BSECU
RING
SYSTEM
SF
SLINGS + LANYARDS
D ABSEILIN
G /
POSITIO
NIN
G
DEVICE
H KARABIN
ERS, SAFETY HO
OKS,
ACCESSORIES
I80 Rescue from an arrester system81 Abseiling rescue device SOLID84 Abseiling rescue device KE1085 Expansion set PLATTFORM
RESCUE DEVICES 78FALLSTOP® SAFETY
Rescue devices
RESCUE DEVICES 79FALLSTOP® SAFETY
IRET-TU
NG
S-GERÄTE
Starting situation »Emergency«:
An unconscious person is hanging com-pletely passively in the arrester device of an vertical fall-arrest ladder. There is a seri-ous risk of an orthostatic shock that can lead to death very quickly.
As quickly as possible, the casualty • must be freed from his suspended posi-
tion• must be transported to a safe and easily
accessible level (ideally the ground)• first aid must be administered
To realise this effectively, it is imperative that the rescue measures are carried out immediately by the colleagues.
This is easier than it appears • with the right tools (rescue equipment)• with the right know-how (training)
This situation is just an example:
On platforms, roofs, lattice masts, cranes etc. – everywhere where rope protection is used and rescue operations cannot be car-ried out with technical equipment quickly.
Rescue without irreversible cutting of the rope.
The rescuer climbs upwards to the casualty with the rescue basket.
Lift the casualty using the lift function and relieve the vertical fall-arrest system so it can be disen-gaged.
Unconscious person is hanging in the vertical fall-arrest equipment.
The rescue equipment is suspended and secured at a position as high as possible above the casualty.
Position the casualty securely and control with the abseiling brake and lower down safely. Administer first aid.
Rescuing a casualty from a vertical-fall-arresting system
80FALLSTOP® SAFETYRESCUE DEVICES
Abseiling rescue device with lift functionSOLID HUB
Use A strong abseiling rescue device with a lift function for up to two persons. The abseiling and rescue device SOLID HUB with a lift function is used to rescue people at heights, on rope tracks and industrial climbers. It is suita-ble for working at great heights, in climbing parks, and is ideal for rescuing several persons quickly. The abseiling and rescue device SOLID HUB can be used for both as shuttle service and also as a rescue tandem. The abseiling process can be regulated with eyebolts and stopped at any time using a jam cleat. Loads of up to 225 kg (two persons) can be lifted with the handwheel. The handwheel can also be operated with a cordless screw-driver to facilitate lifting. The handwheel is equipped with a hinged crank and compensation weight. Other versions available on request.
Product features• Brake system: automatic, redundant brake system with two centrifugal
brakes, brake drums made of steel• Karabiner: TWISTLOCK karabiner, other versions on request• Connection cordless screwdriver: hex• Handwheel lifting device• 3 eyebolts• Housing and attachment made of steel, aluminium body for heat dissipa-
tion
Abseiling rescue device with lift function SOLID HUBEN 341:2011-1A / EN 1496:2007-B Art. NºSOLID HUB01 without crank 1002574SOLID HUB02 with crank 1002906
Rear side of the SOLID HUB
Technical data• Weight: 3.5 kg• Abseiling speed: 0.8 m/s• Rope: ⍉ 9.0 mm static KM• Max. abseiling height: 300.0 m• Max. lifting height: 300.0 m• Max. load-bearing capacity: 225.0 kg• Lengths: 20 m, 30 m, 40 m, 50 m, 60 m, 70 m, 80 m,
90 m, 100 m
ENHANCED PERFORMANCE
81FALLSTOP® SAFETYRESCUE DEVICES
AH
ARNESS
SYSTEMS
I RESCU
E D
EVICESE
ROPES
CEN
ERGY
ABSORBERS
G RETRACTABLE TYPE FALL ARRESTERS
BSECU
RING
SYSTEM
SF
SLINGS + LANYARDS
D ABSEILIN
G /
POSITIO
NIN
G
DEVICE
H KARABIN
ERS, SAFETY HO
OKS,
ACCESSORIES
Abseiling rescue device SOLID S
Use The abseiling device SOLID S has an automatic centrifugal brake and is therefore ideally suited for abseiling over great heights. It does not need to be operated which is why it guarantees that an unconscious person can be lowered safely.
The ideal rescue device for construction sites and stationary installation on tower platforms etc. Can be used for self-abseiling or as a shuttle ser-vice for several persons one after another. Thanks to the high useful load of 225 kg, persons can be rescued accompanied by a rescuer (two per-sons).
In professional rescue operations, the rescuer can be lowered with the device and, using the jam cleat and rope deflector (eyebolt), block the rope when he reaches the casualty and stop the abseiling process.
Product features• Redundant brake system with 2 brake drums• High-performance brake with brake drums made of steel and special
brake pads• TWISTLOCK PLUS karabiner in lightweight aluminium, others on request.• Jam cleat for block the rope• 2 eyebolts for deflecting the rope to the jam cleat. Can also be used in
some case for sensitive regulation of the lowering speed • All load-bearing safety-relevant housing parts made of steel• Excellent heat dissipation thanks to sold metal corpus• Tested for excellent abseiling performance in compliance with Class 1A
of the latest version of the standard EN 341
Accessories• FIX mobile anchor point for shuttle service• Anchor sling SETP with integrated protection against sharp edges, heat,
aggressive fluids
Technical data• Weight: 3.4 kg (without rope)• Rope: Kernmantel rope 9.0 mm• Abseiling speed: ca 0.8 m/sec• Max abseiling height: 300.0 m (depends on rope length)• Max useful load: 225.0 kg (Si-factor 10.0 static strength)
Abseiling rescue device SOLID SEN 341:2011-1A Art. NºSOLID S inkl. Seil 20,0 m 1003121_M020
Other lengths on request.
Rear side of the SOLID S
ENHANCED PERFORMANCE
82FALLSTOP® SAFETYRESCUE DEVICES
Ladder bracket SOLID
Mobile anchor point FIX
Expansion kit EVACUATION
Use Highly suited for the SOLID HUB when used in vertical-fall-arresting sys-tems. The ladder bracket allows stable attachment of the rescue device SOLID HUB onto the rungs of the ladder. The ladder bracket is screwed tightly to the SOLID abseiling device.
Technical data• Weight: ca 1.0 kg• Suitable for stationary ladders with vertical-fall-arresting• Useful load: 250 kg• Breaking strength: 12.0 kN• Tested: based on EN 795 B • Redundant securing with a tape sling
Use Reduced to the essentials for swing rappelling. Also suitable for use in extreme conditions, e.g. dirt etc. It has no moving parts that could fail or get lost! Extremely high clamping values with inserted rope for above-av-erage safety! Made of lightweight and corrosion-resistant aluminium.
Technical data• Useful load for swing rappelling: 250 kg (2 persons)• Useful load as an anchor point: 1 person• Weight: 185 g or 365 g (with karabiners)• Type FIX 01: for rope diameter 9.0–11.0 mm• Tested: based on EN 795 B as a mobile anchor point, based on EN 567
rope clamp + CNB/P/11.115
Use For abseiling devices SOLID or KE10. To be kept as an evacuation device. The climate packaging protects it from the effects of the weather or the climatic allowing long-term storage of the PPE or rescue equipment with-out the necessity for detailed annual inspections of the equipment com-ponents. Only an annual visual inspection of the sealing needs to be doc-umented by an instructed person. It is recommended sealing the packag-ing with a lead seal to protect against the weather, mechanical influences and vandalism.
Product features• Mobile anchor point for swing rappelling FIX (Type 1 or 2),
complete with karabiners• Transport or storage containers (barrel, box, etc.)• Climate packaging
Expansion kit EVACUATION Art. Nº 1003572
Mobile anchor point FIX Art. Nº 1003568
Ladder bracket SOLID Art. NºSOLID LK 1002532
NEW
83FALLSTOP® SAFETYRESCUE DEVICES
AH
ARNESS
SYSTEMS
I RESCU
E D
EVICESE
ROPES
CEN
ERGY
ABSORBERS
G RETRACTABLE TYPE FALL ARRESTERS
BSECU
RING
SYSTEM
SF
SLINGS + LANYARDS
D ABSEILIN
G /
POSITIO
NIN
G
DEVICE
H KARABIN
ERS, SAFETY HO
OKS,
ACCESSORIES
The abseiling rescue device BORNACK KE 10 is a professional system used to rescue persons from great heights. Thanks to its simple and clear design, the KE10 has established itself in the market:• Sensitive braking, can be controlled from 0 to 1.0 m/sec. This allows careful circumvention of
obstacles or passage through hatches.• Very low manual braking force (approx. 5 – 10 % of the abseiling weight)• AUTO-STOP function: When the device is released, the abseiling process is interrupted auto-
matically • PANIC lock: When the control lever is erroneously overturned, the device also brakes• Kernmantel rope FALLSTOP ® 10.5 mm Top-Static with very large safety reserve: 30 % safer than
similar devices with a rope of just 9.0 mm• Very small packing volume and low weight• Open design allows simple checking. The user maintains absolute control over the abseiling
process at all times. No hectic or panic resulting from fast turning parts. This is extremely important in rescue operations when stress levels are high and where there is a lack of routine.
Performance data KE10: Maximum abseiling height 100.0 m / 1 person 60.0 m / 2 persons (accompanied by rescuer)
Abseiling rescue device KE10
Use The KE10 St crane is a rescue system allowing the crane operator to abseil from a crane cab or a similar situation.
The KE10 ST CRANE also serves passive abseiling of one person by a rescuer.
Product features• Rope brake KE10 ST CRANE with karabiners• Rescue rope (kernmantel rope), 10.5 mm FALLSTOP® TOP STATIC rope, with
very strong sewn end connection and karabiner, rope length: 25.0 m• Tape sling for attaching the device around a larger part• Rescue-sit harness RG01 with rubber braces• Weather-protected storage box
Abseiling rescue device KE10 ST CRANEEN 341 Art. Nº 1001265
Abseiling rescue device KE10 ST CRANE
THE ORIGINAL
84FALLSTOP® SAFETYRESCUE DEVICES
UseThe KE10 Re rescue system is a universal piece of equipment for rescuing casualties, persons hanging in rope protection from ladders, from a roof or platform edge.
The person who has fallen can be lifted to disengage the rope protection and lower the casualty.
Product features• Rope brake KE10 RE with integrated rope roller for pulley• Hook clamp FS90 with telescopic hook 1.0 m and upper pulley-dual
roller • Lifting device (pulley) 1:4. Tensile force approx. 25 kp.• Attachment strap with karabiner to the redundant safety
Accessories• Expansion kit for platform/ roof rescue• Expansion kit for wood mast rescue• Universal clamp GRIP for ropes, tapes and tape energy absorber
Technical data• Rope lengths: 10 m, 15 m, 20 m, 30 m, 50 m, 100 m
UseThe accessories kit supplements the rescue devices for save rescue over a platform edge.
Product features• Rope clamp• Edge protection bracket with safety line• Tape sling 100 cm• Optional: Additional ropes 10.5 mm for controlling and steering the
abseiling process from the ground (at large abseiling heights or if there are obstacles)
Rescue system KE10 RE Art. Nº 1000723
Expansion set PLATTFORM Art. Nº 1000708
Rescue system KE10 RE
Expansion set PLATTFORM
85FALLSTOP® SAFETYRESCUE DEVICES
AH
ARNESS
SYSTEMS
I RESCU
E D
EVICESE
ROPES
CEN
ERGY
ABSORBERS
G RETRACTABLE TYPE FALL ARRESTERS
BSECU
RING
SYSTEM
SF
SLINGS + LANYARDS
D ABSEILIN
G /
POSITIO
NIN
G
DEVICE
H KARABIN
ERS, SAFETY HO
OKS,
ACCESSORIES
J88 Fall arrester systems89 Fall arrester RAILSTOP RS S0590 Ladder RAILSTOP RS 91 Climbing aid G-CLIMBER 92 Rope fall arrester system SSE
VERTICAL-FALL-ARRESTING SYSTEMS 86FALLSTOP® SAFETY
Vertical-fall- arresting systems
VERTICAL-FALL-ARRESTING SYSTEMS 87FALLSTOP® SAFETY
J VERTICAL- FALL-ARRESTIN
G
SYSTEMS
Fall arrester systems
Stationary ladders are installed for access to elevated workplaces, for instance to rooftops, silos, light masts, radio towers, but also on large machines such as shelf-operating systems or vehicles such as ships etc.
Other application examples, such as pylons have step irons on the corners. Access to workplaces with restricted depths such as shafts etc. are usually equipped with step irons or steps. If the climbing path is longer than 5 m in total, persons need to be secured.
Back cages on ladders are not considered effective fall protection. An unconscious person would fall unhindered. Rescuing a casualty by means of abseiling requires a great amount of effort and is difficult.
With few exceptions, prevention deliberations generally lead to the use of a fall arrester system.
Fall arrester systems are governed by the standard EN 353-1 and comprise a guide, which is perma-nently installed along the climbing path, and a detachable fall arrester to which the user is secured; this secures him as he ascends and descends, and arrests him in case he falls.
The guides may be made of cable wire or rails. These are materials that can be permanently mounted outdoors exposed to the elements.
Load-bearing guides made of rails are anchored onto the ladder at regular distances of approx. 1.3 m; their structural stability must have been statistically verified.
An ideal and inexpensive option is to equip lad-ders with integrated rail guides, like the RS ladder.
Cable wire rails only have one load transfer point on the upper cable attachment which greatly facilitates planning and assembly. They are highly suitable for retrofitting to ladders or step irons with a vertical-fall-arresting system.
VERTICAL-FALL-ARRESTING SYSTEMS 88FALLSTOP® SAFETY
Fall arrester RAILSTOP RS S05 EN 353-2 Art. NºRS S05 1000006RS S05 SWIVEL 1000038
UseThe fall arrester RS S05 sets new standards in terms of safety and ergo-nomics!
2 redundant safety catches immediately prevent falls caused when a per-son slides from the ladder, even under horizontal force.
2 separate attachment points on the full body harness at hip height and chest height maintain the ergonomically perfect climbing support via the pelvic padding of the harness.
This reduces the risk of an accident caused by physical exertion. In the event of a fall, it prevents the upper body from tilting forward, which can have fatal consequences. After the fall, the body remains in a supported position.
Proven technology• There are more than 50 000 of these devices in use across the world,
proving their value • Ball-bearing, low-friction rollers for effortless climbing • No precision mechanics – suitable for rough environments – easy
inspection• Effortless climbing with the central abdominal belt is still possible
Product features• Material: aluminium corpus• Separate safety catches for falls and tilting • Optionally with safety hooks FS51 or karabiners with TWISTLOCK PLUS
fastener and SWIVEL connection• Colour: silver
Technical data• Weight: 900 g • Max. no. of users: 1 person, min. 50 kg, max. 150 kg
Fall arrester RAILSTOP RS S05
VERTICAL-FALL-ARRESTING SYSTEMS
RS S05
RS S05 SWIVEL
ApplicationVertical-fall-arresting
THE ORIGINAL
89FALLSTOP® SAFETY
AH
ARNESS
SYSTEMS
I RESCU
E D
EVICESE
ROPES
CEN
ERGY
ABSORBERS
G RETRACTABLE TYPE FALL ARRESTERS
BSECU
RING
SYSTEM
SJ
VERTICAL- FALL-ARRESTIN
G
SYSTEMS
F SLINGS + LANYARDS
D ABSEILIN
G /
POSITIO
NIN
G
DEVICE
H KARABIN
ERS, SAFETY HO
OKS,
ACCESSORIES
Ladder RAILSTOP RS
UseY-ladder with non-slip double rungs.
Central elements with integrated C-profile rail. Guide rail with locking openings for the safety catch of the fall arrester.Version: hot-dipped steel. Optional stainless steel.
Rail curves for moving around protrusions etc. can be ordered. Attached with C-brackets as intervals of max. 1.2 m. Various versions available.
Product features• Material: hot-dipped steel • C-profile rail• Rungs
Accessories• Insert lock and locking bolts for start of climbing path• Safety catch for end of climbing path • Removal flap during climbing • Resting platform• Rail joint connector• Colour: silver
Ladder RAILSTOP RS EN 353-2 on request
Application
VERTICAL-FALL-ARRESTING SYSTEMS
Vertical-fall-arresting
THE ORIGINAL
90FALLSTOP® SAFETY
NEWClimbing aid G-CLIMBER
UseThe G-CLIMBER helps the user ascend and descend in fall arrester sys-tems. This offers the user physical relief and also saves time.
Thanks to its individually settable tension force, the G-CLIMBER helps the user ascend quickly by adjusting to the climber's speed.
The drive is mobile, so that only the relief rope and the adapter are per-manently installed on the vertical-fall-arresting equipment. Assembly is quick and easy.
Product features• Material: steel galvanised, stainless steel, aluminium, polyester rope• Mobile drive• Rope• Rope clamp• Adapter for drive• Colour: red
Technical data• Weight: 14 kg• Max. no. of users: 1 person, min. 50 kg, max. 150 kg• Relief up to 50 kg• Power connections: 230V, 50 Hz, IP54 / 230V, 60 Hz, IP54 /
110V, 50 Hz, IP54
Climbing aid G-CLIMBEREN 353-2 on request
Application
AH
ARNESS
SYSTEMS
I RESCU
E D
EVICESE
ROPES
CEN
ERGY
ABSORBERS
G RETRACTABLE TYPE FALL ARRESTERS
BSECU
RING
SYSTEM
SJ
VERTICAL- FALL-ARRESTIN
G
SYSTEMS
F SLINGS + LANYARDS
D ABSEILIN
G /
POSITIO
NIN
G
DEVICE
H KARABIN
ERS, SAFETY HO
OKS,
ACCESSORIES
Vertical-fall-arresting
THE ORIGINAL
91FALLSTOP® SAFETY
Rope fall arrester systemSSE
Rope fall arrester system for simple and inexpensive retrofitting onto step irons or a stationary ladder.
SSE for climbing ladderse.g. on machines, masts, etc. as a supplement to back cage ladders.
End attachment at the top. Clamp bracket across 2 ladder rungs. Special design available as an option. Guide cable in stainless steel, 8.0 mm, complete with prefabricated cable rope end con-nection with toggle-fork terminal. Cable tensioning device for stepless adjustment on the lower end of the rope. With cable clamp, tensioning spindle and pre-tensioning spring. Indicator showing cable pre-tension. Integrated end attachment across 2 rungs.
Cable guides at a distance of 3.0–10.0 m prevent the cable swing-ing to the side when under load, as a result of the wind or due to machine movements. Integrated clamp attachment across 1 rung. All parts made of stainless steel.
SSE for step ironse.g. on high-voltage lattice masts etc.
To date, approx. 6 000 systems have been installed on masts in various regions and have proven their value on a day-to-day basis. BORNACK installed the first cable fall arrester systems over 20 years ago and now has long-term experience.
Guide cable in stainless steel, 8.0 mm, complete with prefabricated cable rope end connection with toggle-fork terminal. Cable tensioning device for stepless adjustment on the lower end of the rope. With cable clamp, tensioning spindle and pre-ten-sioning spring. Indicator showing cable pre-ten-sion. Integrated end attachment bracket. Cable guides at a distance of 3.0–10.0 m prevent the cable swinging to the side when under load, as a result of the wind or due to machine movements. All parts in stainless steel. There is a wide range of clamp or screw attachments for attachment to various mast profiles. Version in hot-dipped steel or optionally in stainless steel. Made-to-measure customised attachments can be supplied to meet individual requirements.
BORNACK's SAFEPOINT® safety equipment is also available as 'turnkey systems' including planning, installation and instruction. BORNACK also offers training courses about how to rescue casualties from vertical-fall-arresting systems so you can enhance your know-how and round off your per-sonal safety concept.
VERTICAL-FALL-ARRESTING SYSTEMS 92FALLSTOP® SAFETY
NEWFall arrester SSE02
UseSets new standards in rope-based vertical-fall-arresting systems!
When climbing or descending, the arresting device simply slides along the rope freely without the need for intervention; even across rope guides.
In the event of a fall, the eccentric of the safety catch clamps steplessly onto the rope and arrests the user; even under horizontal strain or if the user falls to the side.
The redundant safety catch prevents the arresting mechanism from blocking in the event that the user panics (grabbing the device) or scrap-ing (if holding onto the bracing rope).
The high-performance tape energy absorber is designed for a useful load of up to 150 kg and limits the fall impact to < 6.0 kN!
The SSE02 can be attached and removed from the rope at any point. Thanks to the innovative prism lock, this can be carried out with just one hand, either the right or left!
There is a safety feature to ensure that the device cannot be placed on the rope in the wrong direction.
Product features• Material: stainless steel• Panic lock »scraping«• Panic lock »grabbing«• Securing against horizontal strain• Safety catch to prevent reversed attachment of the device • Tape energy absorber • SWIVEL karabiner with TWISTLOCK PLUS fastener• Colour: silver, black
Technical data• Max. no. of users: 3 persons• User weight min. 50 kg, max. 150 kg• Weight: 1.22 kg
Fall arrester SSE02EN 353-1 Art. Nº 1001845
Application
AH
ARNESS
SYSTEMS
I RESCU
E D
EVICESE
ROPES
CEN
ERGY
ABSORBERS
G RETRACTABLE TYPE FALL ARRESTERS
BSECU
RING
SYSTEM
SJ
VERTICAL- FALL-ARRESTIN
G
SYSTEMS
F SLINGS + LANYARDS
D ABSEILIN
G /
POSITIO
NIN
G
DEVICE
H KARABIN
ERS, SAFETY HO
OKS,
ACCESSORIES
Vertical-fall-arresting
THE ORIGINAL
93FALLSTOP® SAFETY
K96 Door anchor TA11096 Bracing rope AK DA0197 Bracing rope LEOS01 97 Fall-guard WINDOW
MOBILE ANCHOR DEVICES 94FALLSTOP® SAFETY
Mobileanchor devices
MOBILE ANCHOR DEVICES 95FALLSTOP® SAFETY
K M
OBILE
ANCH
OR
DEVICES
Door anchor TA110EN 795-B / CEN/TS 16415-B Art. Nº 1000856
Door anchor TA110
Bracing rope AK DA01
Bracing rope AK DA01EN 795-C Art. Nº AK DA01 13 m 1000859_M013AK DA01 18 m 1000859_M018
Restraint
Arresting Restraint
Use Mobile anchor point for attachment to a door without damaging the building. Adjustable attachment and turnbuckle for clamping into the door frame in an adequately strong wall.Suitable for one or two persons.
Product features• Opening width can be adjusted to 110 cm• D-ring
Use Textile bracing rope for temporary use on building sites etc. for anchoring rope protection equipment. The bracing rope is attached to suitable fixed points (strength min. 15.0 kN / end point and 8.0 kN per intermediate point). Larger span widths can be divided up by means of strung karabiners as intermediate points to field widths of max. 6.0 m.
Product features• Special safety rope, diameter 16 mm, with karabiners, L = 18.0 m• Rope tensioning device with fall energy absorption• 3 strung safety hooks for intermediate securing• Transport sack DRYPACK
Technical data• Max. no. of persons 2 up to 90 cm opening width• Max. no. of persons 1 up to 110 cm opening width
Technical data• Lengths: 13 m, 18 m
THE ORIGINAL
THE ORIGINAL
96FALLSTOP® SAFETYMOBILE ANCHOR DEVICES
Bracing rope LEOS01
Bracing rope LEOS01EN 795-B / EN 795-C Art.-Nr 1000664
Fall-guard WINDOW Art.-NrType 1 1001927Type 2 1001292
Fall-guard WINDOW
Arresting Restraint
Restraint
Use The horizontal bracing rope AK-LEOS 01 allows inexpensive and fast prepara-tion of assembly sites for rope protection. The rope is simply tensioned between two adequately strong anchoring points.
Using the special manual tensioning device, the rope is adapted steplessly to each installation length and tensioned to the required level by means of a ratchet. It is not possible to reach a critical level of over-tension. The rope is prevented from returning and the tension is maintained even under load by means of a clamping cam.
Due to the energy absorption capacity of this special rope design in combina-tion with this tensioning device, no additional impact force absorption in the bracing rope is required.
Product features• 16 mm kernmantel rope made of polyamide• Tensioning unit with detachable ratchet• Attached with safety hooks with TWISTLOCK PLUS fastener,
permanently sewn-in• Transport sack DRYPACK
Use The mobile railing can be fitted into almost any window for temporary working near windows, e.g. window cleaning. It satisfies the require-ments of the DIN standard 'Working and Protective Scaffolds': the speci-fied height for the railing of 1.0 m and the knee rail of 0.5 m are satisfied. Easy to install from the floor, there is no risk of falling when installing the railing.
Product features• Telescopic railing element
Technical data• Max. window frame thickness: 90 mm• Type 1: Adjustment range 0.8–1.2 m: Weight 3.6 kg• Type 2: Adjustment range 1.1–1.6 m: Weight 4.2 kg• Standard: Tested by special committee »Construction«,
GS seal of approval
Technical data• Span widths 6.0–10.0 m • Total length max. 30.0 m
ENHANCED PERFORMANCE
97FALLSTOP® SAFETYMOBILE ANCHOR DEVICES
AH
ARNESS
SYSTEMS
I RESCU
E D
EVICESE
ROPES
CEN
ERGY
ABSORBERS
K M
OBILE
ANCH
OR
DEVICES
G RETRACTABLE TYPE FALL ARRESTERS
BSECU
RING
SYSTEM
SJ
VERTICAL- FALL-ARRESTIN
G
SYSTEMS
F SLINGS + LANYARDS
D ABSEILIN
G /
POSITIO
NIN
G
DEVICE
H KARABIN
ERS, SAFETY HO
OKS,
ACCESSORIES
L100 Tripod D-series101 Jib PM-seriese102 Polygonal support PM10102 Work seat103 Rescue chute RR01104 Passenger winch PM W104 Material winch PM MW105 Retractable type fall arrester BLOCKSTOP
ACCESS SECURING SYSTEMS AND TRIPODS 98FALLSTOP® SAFETY
Access securing systemsand tripods
ACCESS SECURING SYSTEMS AND TRIPODS 99FALLSTOP® SAFETY
L ACCESS SECU
RING
SYSTEM
S
Tripod PROMAN D300
Tripod PROMAN D1000
Expansion kit PROMAN RT1000
Tripod PROMAN D300EN 795-B Art. NºPROMAN D300 1000182PROMAN Deflection roller 1000145PROMAN Tasche D300 1000861
Tripod PROMAN D1000EN 795-B Art. NºPROMAN D1000 1000144PROMAN Deflection roller 1000145PROMAN Tasche D1000 1000862
Use Very strong, telescopic legs made of aircraft aluminium with plastic guides and pull-out protection. Suitable for outdoor terrain and hall floors thanks to hinged feet. Steel head on request with up to 3 head deflector rollers.
Product features• Telescopic legs• Holders for up to 3 deflector rollers
Technical data• Construction height: max. 220 cm• Opening diameter: max. 160 cm• Max. load: 300 kg• Package length: 160 cm
Use Very strong, telescopic legs made of aircraft aluminium with plastic guides and pull-out protection. Suitable for outdoor terrain and hall floors thanks to hinged feet. Steel head on request with up to 3 head deflector rollers.
Product features• Telescopic legs• Holders for up to 3 deflector rollers
Technical data• Construction height: max. 320 cm• Opening diameter: max. 225 cm• Max. load: 300 kg• Package length: 220 cm• Weight: 30 kg
Use Using the RT1000, the Tripod D1000 becomes a versatile and handy rescue device used to rescue persons over roof edges, etc. The system is stabilised by counterweights (using vehicles, persons, weights etc.) or by attachment to a fixed point.
Product features• Counter-jib• Struts
Technical data• Construction height: max. 220 cm• Max. load: 300 kg• Package length: 160 cm• Weight: 20 kg
Expansion kit PROMAN RT1000EN 795 Art. NºPROMAN RT1000 Expansion kit 1001066Weight holder for RT1000 1001067
100FALLSTOP® SAFETYACCESS SECURING SYSTEMS AND TRIPODS
Use Jib for securing and rescuing in different abseiling positions by means of permanently mounted floor or wall brackets made of stainless steel with a plastic sheath inside. Therefore suitable for EX-areas.
Product features• Material: aluminium• Jib with deflector rollers• Standpipe
Accessories • Wall bracket• Floor bracket• Passenger winch• Winch bracket PM2000
Technical data• Jib: max. 110 cm• Max. load: 205 kg• Package length: 150 cm• Weight: 25 kg• Heaviest single part: 10 kg
UseJib for securing and rescue operations in difficult to access places at a dis-tance of up to 3.5 m.
Product features and Accessories• Material: aluminium• Telescopic jib with deflector rollers• Supporting base• fast change plate for passenger winch
Technical data• Max. load: 205 kg• Package length: 150 cm• Weight: 25 kg
Extreme jib PROMAN PM3500
Winch jib PROMAN PM2000
Winch jib PROMAN PM2000EN 1496 Art.-NrPROMAN PM2000 Set 1000051PROMAN PM2000 Wall bracket 1003181PROMAN PM2000 Floor bracket 1003182PROMAN PM2000 Standpipe 1200 1000238
Extreme jib PROMAN PM3500 Art. NºPROMAN PM3500 Set 1002704
PM2000 Floor bracket
PM2000 Wall bracket
THE ORIGINAL
101FALLSTOP® SAFETYACCESS SECURING SYSTEMS AND TRIPODS
AH
ARNESS
SYSTEMS
I RESCU
E D
EVICESE
ROPES
CEN
ERGY
ABSORBERS
K M
OBILE
ANCH
OR
DEVICES
G RETRACTABLE TYPE FALL ARRESTERS
BSECU
RING
SYSTEM
SJ
VERTICAL- FALL-ARRESTIN
G
SYSTEMS
F SLINGS + LANYARDS
D ABSEILIN
G /
POSITIO
NIN
G
DEVICE
L ACCESS SECU
RING
SYSTEM
SH
KARABINERS,
SAFETY HOO
KS, ACCESSO
RIES
Work seat PROMAN AS01 Art. Nº 1000693
Polygonal supportPROMAN PM10
Work seat PROMAN AS01
Use Work seat for all BORNACK PROMAN systems for ascending and descend-ing and also positioning in shafts, silos, tanks etc. Optimised harness guidance, lap belt, settable foot supports and spacious tool bags.
Product features• Material: PVC fabric and polyester harness strap• Seat• Floor supports• Tool bag• Safety harness
Technical data• Max. load: 200 kg• Weight: 4.5 kg
Polygonal support PROMAN PM10EN 795 / EN 1496 Art.-Nr 1001904
UseVersatile stationary multipurpose support made of lightweight alumini-um.
Use as an attachment point• For rope protection on flat roofs, platforms etc. for up to 3 persons at the
same time• For entry and rescue (PM W passenger winch) on access openings, falling
edges etc Product features• Material: aluminium
Technical data• Jib max.: 110 cm• Max. load: 205 kg• Package length: 150 cm• Weight: 25 kg• Heaviest single part: 10 kg
LoweringPositioning
THE ORIGINAL
THE ORIGINAL
102FALLSTOP® SAFETYACCESS SECURING SYSTEMS AND TRIPODS
Rescue chute PROMAN RR01 with horizontal jib
System for fast, safe rescue of incapacitated persons from spaces with vertical accesses without risking injury.
People and materials need to access the inside of upright tanks to carry out work such as repeated internal inspections, repairs, cleaning, assem-bly work, dismantling of parts. Therefore, access openings, so-called man-holes, are planned at the necessary points when tanks are designed. If a person in the tank becomes incapacitated due to an accident or a health problem, rescuing this person without suitable rescue equipment is extremely difficult and time-consuming due to the geometric circum-stances, and there is also a risk of injury.
Rescue operations using the rescue chute RR01 simplifies and accelerates the process significantly, allows the person to be rescued on their back and reduces the risk of injury considerably.
The rescue chute comprises a bent chute with a rope in the middle and a permanently attached anchor plate with two attachment vices for locking to the manhole flange. The chute that protrudes into the tank ensures that the casualty is pulled upwards with sufficient distance to the wall of the tank to prevent scraping. A clip attached to the rope of the rescue winch prevents further pulling until the head of the casualty reaches the chute allowing him to be turned onto his back. The casualty can then be pulled onto the rescue chute and is then moved ergonomically from a ver-tical into a horizontal position. He leaves the manhole head and shoulders first and can then be easily pulled out by the rescuers.
Product features• Chute corpus is a handmade aluminium construction• Clamp flange for manholes with diameters of 500 –
600 mm and a manhole depth of up to 300 mm
Rescue chute PROMAN RR01 with horizontal jibEN 795-C Art. NºRR01 Rescue chute 1000304Horizontal jib 1000305assenger winch PM W 1010 1000973_M022
THE ORIGINAL
103FALLSTOP® SAFETYACCESS SECURING SYSTEMS AND TRIPODS
AH
ARNESS
SYSTEMS
I RESCU
E D
EVICESE
ROPES
CEN
ERGY
ABSORBERS
K M
OBILE
ANCH
OR
DEVICES
G RETRACTABLE TYPE FALL ARRESTERS
BSECU
RING
SYSTEM
SJ
VERTICAL- FALL-ARRESTIN
G
SYSTEMS
F SLINGS + LANYARDS
D ABSEILIN
G /
POSITIO
NIN
G
DEVICE
L ACCESS SECU
RING
SYSTEM
SH
KARABINERS,
SAFETY HOO
KS, ACCESSO
RIES
Passenger winchPROMAN PM W
Material winchPROMAN PM MW
Passenger winch PROMAN PM WEN 1496 Art. NºPM W 1010 max. 22 m 1000973_M022PM W 1020 max. 30 m 1000973_M030PM W 1030 max. 45 m 1002978_M045
Material winch PROMAN PM MW Art. Nº 1003033
Attachment bracket
UseSpecially developed winch to transport passengers with a hand crank and extensive control options. Particularly suited for moving into and rescuing from confined spaces, for instance rescuing casualties or lifting persons from danger zones.
Product features• Triple redundant braking system via three independent brake cams• Emergency stop by means of centrifugal-operated over-speed control • Self-locking: activation of the friction brake at a force of just 4.5 kg• Digital use display (number of completed rotations) for secure compli-
ance of the maintenance intervals • Brake pad wear display• Model with 5 mm stainless steel cable (PM W 1010 - 1030)
Accessories • Attachment bracket for PM2000• Attachment bracket for D300• Attachment bracket for D1000
Technical data• Max. load: 225 kg• Weight: 14 kg
UseMaterial winch for loads up to 300 kg.
Product features• Steel rope• Hand crank
Accessories • Attachment bracket for D300• Attachment bracket for D1000
RescueLowering
104FALLSTOP® SAFETYACCESS SECURING SYSTEMS AND TRIPODS
Retractable type fall arrester BLOCKSTOP RIGGA HUB
Retractable type fall arrester BLOCKSTOP HUB
Retractable type fall arrester BLOCKSTOP HUB EN 360 Art. Nº 1000242
Retractable type fall arrester BLOCKSTOP RIGGA HUB EN 360 Art. Nº 1001779
UseRetractable type fall arrester with integrated rescue device. In addition to preventing falls, this device also allows persons hanging in ropes to be lift-ed. It is highly suitable for working in shafts and tanks. It is compatible with all BORNACK PROMAN securing and rescue devices if the correct bracket it used.
Product features• Galvanised steel rope• Safety hooks
Accessories • Attachment bracket for PM2000• Attachment bracket for D300• Attachment bracket for D1000
Technical data• Max. load: 136 kg• Weight: 9.5 kg• Length: 18 m
UseRetractable type fall arrester with integrated rescue device. In addition to preventing falls, this device also allows persons hanging in ropes to be lift-ed. It is highly suitable for working in shafts and tanks. It is compatible with all BORNACK PROMAN securing and rescue devices if the correct bracket it used.
Product features• Galvanised steel rope• Safety hooks
Accessories • Attachment bracket for PM2000• Attachment bracket for D300• Attachment bracket for D1000
Technical data• Weight: 10.2 kg• Length: 15 m
RescueArresting
RescueArresting
105FALLSTOP® SAFETYACCESS SECURING SYSTEMS AND TRIPODS
AH
ARNESS
SYSTEMS
I RESCU
E D
EVICESE
ROPES
CEN
ERGY
ABSORBERS
K M
OBILE
ANCH
OR
DEVICES
G RETRACTABLE TYPE FALL ARRESTERS
BSECU
RING
SYSTEM
SJ
VERTICAL- FALL-ARRESTIN
G
SYSTEMS
F SLINGS + LANYARDS
D ABSEILIN
G /
POSITIO
NIN
G
DEVICE
L ACCESS SECU
RING
SYSTEM
SH
KARABINERS,
SAFETY HOO
KS, ACCESSO
RIES
M 108 FALLSTOP® SET MINI108 FALLSTOP® SET BASIC109 FALLSTOP® SET SPECIAL109 FALLSTOP® SET ASSEMBLY110 FALLSTOP® SET TELECOM110 FALLSTOP® SET ENERGY111 FALLSTOP® SETS SCAFFOLDING113 FALLSTOP® SETS ELEVATED PLATFORM
DEVICE SETS AND ROPE PROTECTION SETS 106FALLSTOP® SAFETY
Device sets and rope protection sets
DEVICE SETS AND ROPE PROTECTION SETS 107FALLSTOP® SAFETY
M D
EVICE/ROPE
PROTECTIO
N
SETS
FALLSTOP® SET MINI Art. NºFALLSTOP® SET MINI PROFITEC 1002073FALLSTOP® SET MINI PROFI 1002074
All other FALLSTOP® harnesses are also available in the set against a surcharge.
Rope protection set FALLSTOP® SET BASIC
Rope protection set FALLSTOP® SET MINI
FALLSTOP® SET BASIC Art. NºFALLSTOP® SET BASIC PROFITEC 1001267FALLSTOP® SET BASIC PROFI 1002879
All other FALLSTOP® harnesses are also available in the set against a surcharge.
UseSecuring system for simple tasks at elevated workplaces e.g. cleaning buildings.
Comprising• Full body harness STRIPE BASIC• Energy absorber rope BFD01 ROPE, length: 1.5 m with hook clamp FS90• Optionally made of twisted rope PROFI 16 mm or kernmantel rope
PROFITEC 12 mm• Device bag
UseVersatile securing system for maintenance and assembly.
Bestehend aus• Full body harness FS3 CLICK• Rope shortener/energy absorber FALLSTOP® BK with connector lanyard
with 10 m safety rope optionally PROFI 16 mm twisted rope or PROFITEC 12 mm Kernmantel rope
• Metal device case
ApplicationArresting
ApplicationRestraintArresting Positioning
108FALLSTOP® SAFETYDEVICE SETS AND ROPE PROTECTION SETS
Rope protection set FALLSTOP® SET SPECIAL
FALLSTOP® SET SPECIAL Art. Nº 1003570
All other FALLSTOP® harnesses are also available in the set against a surcharge.
FALLSTOP® SET ASSEMBLY Art. NºFALLSTOP® SET ASSEMBLY PROFITEC 1001318
All other FALLSTOP® harnesses are also available in the set against a surcharge.
Rope protection set FALLSTOP® SET ASSEMBLY
UseSecuring system for movement-intensive work/tasks.
Bestehend aus• Full body harness STRIPE BASIC CLICK• Retractable type fall arrester 10 m• Anchor harness in SETP version• Device bag
UseSecuring system specially designed for assembly work.
Bestehend aus• Full body harness STRIPE COMFORT CLICK LIGHT• Energy absorber line PYTHON, Length: 1.5 m, with hook clamp FS90• Lanyard MANUSTOP 1.5 m, optionally made of twisted rope PROFI or
kernmantel rope PROFITEC• Anchor device GREIFFIX• Metal device case
Arresting Positioning
ApplicationArresting
Application
109FALLSTOP® SAFETYDEVICE SETS AND ROPE PROTECTION SETS
AH
ARNESS
SYSTEMS
I RESCU
E D
EVICESE
ROPES
M D
EVICE/ROPE
PROTECTIO
N
SETSC
ENERG
Y ABSO
RBERSK
MO
BILE AN
CHO
R D
EVICESG
RETRACTABLE TYPE FALL ARRESTERS
BSECU
RING
SYSTEM
SJ
VERTICAL- FALL-ARRESTIN
G
SYSTEMS
F SLINGS + LANYARDS
D ABSEILIN
G /
POSITIO
NIN
G
DEVICE
L ACCESS SECU
RING
SYSTEM
SH
KARABINERS,
SAFETY HOO
KS, ACCESSO
RIES
RestraintArresting Positioning Rescue
Rope protection set FALLSTOP® SET TELEKOM
FALLSTOP® SET TELEKOM Art. NºFALLSTOP® SET TELEKOM PROFI 1002200FALLSTOP® SET TELEKOM PROFITEC 1002545
All other FALLSTOP® harnesses are also available in the set against a surcharge.
Rope protection set FALLSTOP® SET ENERGY
UseSecuring system specially designed for energy suppliers. Climbing on masts made of wood, concrete or metal.
Comprising• Full body harness STRIPE COMFORT CLICK LIGHT• Energy absorber line PYTHON, Length: 1.5 m• SETP anchor sling 0.75 m• Lanyard MANUSTOP made of twisted rope PROFI 16 mm
or kernmantel rope PROFITEC 12 mm, length: 1.5 m• BOA lanyard for wooden masts• Metal device case
FALLSTOP® SET ENERGY Art. Nº 1003571
All other FALLSTOP® harnesses are also available in the set against a surcharge.
UseSecuring system specially designed for the telecommunications sector.
Comprising• Full body harness FS4 T• Securing system FALLSTOP® BK with lanyard and 15 m kernmantel
rope with sewn end connections and steel safety hooks FS51• Energy absorber rope BFD01 ROPE made of kernmantel rope
PROFITEC 12 mm, length: 1.5 m and hook clamp FS90• Lanyard MANUSTOP made of kernmantel rope PROFTEC 12mm, 1.5 m• SETP anchor sling 0.75 m• Metal device case
Application
ApplicationArresting Positioning Rescue
110FALLSTOP® SAFETYDEVICE SETS AND ROPE PROTECTION SETS
Rope protection set FALLSTOP® SET SCAFFOLDING1
FALLSTOP® SET SCAFFOLDING1 Art. Nº 1006026
All other FALLSTOP® harnesses are also available in the set against a surcharge.
FALLSTOP® SET SCAFFOLDING2 Art. Nº 1002027
All other FALLSTOP® harnesses are also available in the set against a surcharge.
Rope protection set FALLSTOP® SET SCAFFOLDING2
UseSecuring system specially designed for the scaffolding sector. The work length is maximum 2.5 m.
Comprising• Full body harness STRIPE BASIC• Rear D-ring extension• FLEX tape energy absorber • Device bag
UseSecuring system specially designed for the scaffolding assembly. The work length is max. 2.5 m.
Comprising• Full body harness STRIPE BASIC• Rear D-ring extension• Self-winding energy absorber line with strap tensioner RETRAK• Device bag
Application
Application
RestraintArresting
RestraintArresting
111FALLSTOP® SAFETYDEVICE SETS AND ROPE PROTECTION SETS
AH
ARNESS
SYSTEMS
I RESCU
E D
EVICESE
ROPES
M D
EVICE/ROPE
PROTECTIO
N
SETSC
ENERG
Y ABSO
RBERSK
MO
BILE AN
CHO
R D
EVICESG
RETRACTABLE TYPE FALL ARRESTERS
BSECU
RING
SYSTEM
SJ
VERTICAL- FALL-ARRESTIN
G
SYSTEMS
F SLINGS + LANYARDS
D ABSEILIN
G /
POSITIO
NIN
G
DEVICE
L ACCESS SECU
RING
SYSTEM
SH
KARABINERS,
SAFETY HOO
KS, ACCESSO
RIES
Rope protection set FALLSTOP® SET SCAFFOLDING4
UseCompact rescue set specially designed for the scaffolding sector. Has a lift function that allows persons who have fallen to be lifted or lowered to the next scaffolding level.
Comprising• LORY SCAFFOLD 30 m, 40 m, 50 m, 60 m
Rescue
Application
Rope protection set FALLSTOP® SET SCAFFOLDING3
FALLSTOP® SET SCAFFOLDING3 Art. Nº 1002550
All other FALLSTOP® harnesses are also available in the set against a surcharge.
FALLSTOP® SET SCAFFOLDING4 Art. Nº 1001120
All other FALLSTOP® harnesses are also available in the set against a surcharge.
RestraintArresting
UseSecuring system specially designed for the scaffolding sector.
Comprising• Full body harness STRIPE BASIC• Rear D-ring extension• Retractable type fall arrester BLOCKSTOP INDUSTRY• Device bag• Rope variants: 10 m, 15 m, 20 m
Application
112FALLSTOP® SAFETYGERÄTESÄTZE UND ANSEILSETS
FALLSTOP® SET ELEVATED WORK PLATFORM1 Art. Nº 1002612
All other FALLSTOP® harnesses are also available in the set against a surcharge.
FALLSTOP® SET ELEVATED WORK PLATFORM2 Art. Nº 1002613
All other FALLSTOP® harnesses are also available in the set against a surcharge.
FALLSTOP® SET ELEVATED WORK PLATFORM3 Art. Nº 1002614
All other FALLSTOP® harnesses are also available in the set against a surcharge.
Rope protection set FALLSTOP® SET ELEVATED WORK PLATFORM1
Rope protection set FALLSTOP® SET ELEVATED WORK PLATFORM2
Rope protection set FALLSTOP® SET ELEVATED WORK PLATFORM3
RestraintArresting
UseSecuring system for safety when working on elevated work platforms.
Comprising• Full body harness FS3 CLICK incl. hi-vis vest PROTECTION• Lanyard LORY HOLD, length: 1.5 m• Tape energy absorber BFD01, Length: 0.3 m• Device bag
UseSecuring system for safety when working on elevated work platforms.
ComprisingComprising• Full body harness STRIPE BASIC incl. hi-vis vest PROTECTION• Lanyard MANUSTOP, length: 1.5 m• Tape energy absorber BFD01, length: 0.3 m
UseExtremely compact and lightweight retractable type fall arrester with har-ness strap and swivel attachment.Specially developed for securing persons in mobile work cages. The BLOCKSTOP IKA stands out thanks to its very low force transfer into the anchor points of less than 3 kN in the event of a fall.
Comprising• Full body harness STRIPE BASIC incl. hi-vis vest PROTECTION and HEART LIGHT karabiners• Retractable type fall arrester BLOCKSTOP IKA• Tape sling PROTEC• Device bag
RestraintArresting Positioning
RestraintArresting
113FALLSTOP® SAFETYGERÄTESÄTZE UND ANSEILSETS
AG
URTSYSTEM
EI
RET-TU
NG
S-GERÄTE
ESEILE
CFALLD
ÄMPFER
KM
OBILE
ANSCH
LAG-
GERÄTE
GH
ÖH
EN-
SICHERU
NG
S- G
ERÄTEB
SICHERU
NG
S- SYSTEM
EJ
STEIGSCH
UTZ-
SYSTEME
FVERBIN
DU
NG
S- M
ITTELD
ABSEIL- UN
D
POSITIO
NI-
ERGERÄTE
L EIN
STIEG-
SICHERU
NG
S- SYSTEM
EH
KARABINER
SICHERH
EITS- H
AKENM
GERÄTESÄTZE
ANSEILSETS
N116 Climbing gloves117 Climbing boots118 Overalls119 Functional underwear119 Hi-vis vest120 Goggles121 Tool locks122 Headlamps and helmet lamps
CLOTHING AND ACCESSORIES 114FALLSTOP® SAFETY
Clothing and accessories
CLOTHING AND ACCESSORIES 115FALLSTOP® SAFETY
N CLO
THIN
G
AND
ACCESSO
RIES
Climbing gloves NETWORKER
Climbing gloves NIPPON
UseThese gloves protect the wearer against wind, rain and injury when climb-ing and ascending. The gloves are equipped with a GORETEX® membrane that offers excellent protection against wet and wind. It ensures a pleas-ant climate around the hands when wearing the gloves and transports moisture away from the skin. The glove is available in an unlined model for the summer and a lined model for the winter.
Product features• Material: GORETEX®• Velcro fastener on the sleeve• Colour: black
Technical data• Weight: approx. 180 g • Sizes: 8, 9, 10, 11
UseThis light glove offers pleasant protection against dust, wind and slight injuries. The calfskin surface and the narrow cut allow a high level of dex-terity when working. The back of the hand is made of material to ensure a pleasant climate when working.
Product features• Material: calfskin/material• Velcro fastener on the cuff• Colour: white/blue/beige
Technical data• Weight: approx. 80 g• Sizes: 6, 7, 8, 9, 10, 11, 12
Climbing gloves NETWORKER Art. NºNETWORKER 1001095NETWORKER ISO (lined) 1001094
Climbing gloves NIPPON Art. Nº 1001096
116FALLSTOP® SAFETYCLOTHING AND ACCESSORIES
Climbing boots PUMA
Climbing boots CLIMBER
UseThese boots have a high shaft for the best possible hold when climbing. The robust rubber / PU sole with its sturdy terrain profile is very wear- resistant and non-slip. The HAIX® climate system ensures the boots are pleasant to wear.
Product features• Material: GORETEX®• Shaft height: 22 cm• HAIX® climate system• Vibram® Breithorn sole• Steel toes cap• Leather thickness: 2.5–2.7 mm• Colour: black
Technical data• Weight: approx. 2.168 kg• Sizes: 38–47, Übergröße 48
UseThese sporty boots offer both hold and protection at work. The SYMPATEX® features protect the wearer from wind and water and the active moisture exchange properties ensure they are pleasant to wear.
Product features• Material: CORDURA®• Shaft made of greased cowhide leather• Lining made of Cambrelle• PU-sole with PUMA CELL element• SYMPATEX® elements• Steel cap with comfort width for more toe freedom • L-protection® 40% lighter steel insole• Anti-magnetic• Thermally insulating• Highly flexible• Higher anti-perforation protection• Colour: brown
Technical data• Weight: approx. 1.860 kg• Sizes: 39–47
Climbing boots CLIMBER Art. Nº 1001097
Climbing boots PUMA Art. Nº 1001098
117FALLSTOP® SAFETYCLOTHING AND ACCESSORIES
AH
ARNESS
SYSTEMS
I RESCU
E D
EVICESE
ROPES
M D
EVICE/ROPE
PROTECTIO
N
SETSC
ENERG
Y ABSO
RBERSK
MO
BILE AN
CHO
R D
EVICESG
RETRACTABLE TYPE FALL ARRESTERS
BSECU
RING
SYSTEM
SJ
VERTICAL- FALL-ARRESTIN
G
SYSTEMS
F SLINGS + LANYARDS
N CLO
THIN
G
AND
ACCESSO
RIESD
ABSEILING
/ PO
SITION
ING
D
EVICEL
ACCESS SECU
RING
SYSTEM
SH
KARABINERS,
SAFETY HOO
KS, ACCESSO
RIES
Height rescue overall TEXPORT
Climbing overall STRATOS
UseThe climbing overall STRATOS was specially developed for workers in the telecommunications sector for working with PPE. The special design below the armpits also allows unrestricted freedom of movement even when wearing a harness. The STRATOS climbing overall is fitted with GORETEX® membranes and offers ideal protection against the wind and rain. In cold weather, the overall can also be equipped with a thermal functional lining that transports moisture to the outside optimally there-by guaranteeing wearing comfort.
Product features• Outer material: 100 % polyester• Sewn-on hood: can be pulled over the safety helmet• Foam knee pads• Extra-long zip fasteners on the legs to allow the overall to be put on
easily even when wearing boots• Two sleeve pockets• Spacious cargo pockets on the legs
Accessories• Thermal inner lining: Material: 3M Thinsulate™, Weight: approx. 980 g,
Sizes: S–XXXL
Technical data• Weight: approx. 1,440 g• Sizes: S–XXXL
UseThe height rescue overall TEXPORT is very comfortable and offers optimal pro-tection against dirt, wind and slight injuries. The pockets are specially arranged to allow easy access in every work situation.
Product features• Materials: polyester/cotton• Zip with wedge section to allow easy access into the sleeves and legs• Fixing loops on the pockets to secure small parts• Detachable knee pads• Reflective strips 3M Scotchlite™ silver• Elastic waistband • Hood can be stowed into the collar for below or above the safety helmet• Stretch fold in elbow and knee areas• 2 attached side pockets • 2 thigh pockets with zips• 2 shin pockets with zips• 2 upper pockets with zips• 1 seat pocket with Velcro fastener
Technical data• Weight: approx. 1,440 g• Sizes: S–XXL
Climbing overall STRATOS Art. NºClimbing overall 1001099Thermal lining 1001100
Height rescue overall TEXPORT Art. Nº 10001177
STRATOS Thermal inner lining
118FALLSTOP® SAFETYCLOTHING AND ACCESSORIES
UseKANSAS 3FUNKTION is functional underwear that offers protection in the cold. The inner side of the material is made of moisture transporting polyester, whilst the outer side is made of cotton which absorbs sweat and also has thermal and insulating properties. This combination makes it the perfect pleasant and soft work underwear.
Product features• Material: 58 % polyester, 42 % cotton• Long sleeve shirt, round-necked, with longer back• Knitted sleeve cuffs and leg • Colour: black
Technical data• Weight: approx. 205 g/m• Sizes: S, M, L, XL
Function underwear KANSAS 3FUNKTION
Function underwear KANSAS 3FUNKTION Art. NºKANSAS 3FUNKTION Long sleeve shirt 1001118KANSAS 3FUNKTION Trousers 1001119
Hi-vis vest PROTECTION
UseSpecial high-visibility vest that is compatible with full body and rescue harness. Openings for front two-part anchorage loops and rear attach-ment D-ring. Thanks to the easy-to-operate fastener at chest height, the front attachment D-ring also remains freely accessible. Velcro fasteners on the inside allow the vest to be permanently attached to the harness and facilitate putting the harness on.
Product features• Colour: orange
Technical data• Weight: 300 g • Sizes: universal
Hi-vis vest PROTECTION Art. Nº 1000891
119FALLSTOP® SAFETYCLOTHING AND ACCESSORIES
AH
ARNESS
SYSTEMS
I RESCU
E D
EVICESE
ROPES
M D
EVICE/ROPE
PROTECTIO
N
SETSC
ENERG
Y ABSO
RBERSK
MO
BILE AN
CHO
R D
EVICESG
RETRACTABLE TYPE FALL ARRESTERS
BSECU
RING
SYSTEM
SJ
VERTICAL- FALL-ARRESTIN
G
SYSTEMS
F SLINGS + LANYARDS
N CLO
THIN
G
AND
ACCESSO
RIESD
ABSEILING
/ PO
SITION
ING
D
EVICEL
ACCESS SECU
RING
SYSTEM
SH
KARABINERS,
SAFETY HOO
KS, ACCESSO
RIES
Goggles SUPER FIT
Goggles PHEOS
Goggles SUPER FIT Art.-NrSUPER FIT clear 1003538SUPER FIT tinted 1003539
Goggles PHEOS Art. NºPHEOS clear 1003540PHEOS tinted 1003541
UseThe ultra-light, non-slip frame goggles offer perfect protection against mechanical risks such as high scratch-resistance and resistance to chemi-cals. Specially designed for work areas with high levels of humidity and fluctuating temperatures.
Product features• Highly scratch-resistant• Resistant to chemicals• Anti-fog coat on the inside• Perfect colour perception• Extremely non-slip • UV protection• High flexibility thanks to ultra-light construction• Very easy to clean and less susceptible to dirt thanks to good anti-
adhesion properties • Lens with basic curve 6.5• Colour: clear or tinted
UseLightweight protective goggles with optimum cover protect the eyes at the front and the side as well as the eyebrow area. The innovative duo-spherical lens has a flood coating making it highly scratch resistant and permanently free from fogging on the inside. Frame with non-slip components ensure the goggles sit securely and are comfortable.
Product features• Duo-spherical lens with large field of vision• Optimum optical axis to prevent eye fatigue• Highly scratch resistant• Anti-fog coat on the inside• UV protection (Supra vision HC-AF (.285), supra vision extreme (.281))• Ventilation system integrated into the frame• Frame ends with opening to attach a cord• Metal-free• Colour: clear or tinted
Technical data• Weight: 30 g
120FALLSTOP® SAFETYCLOTHING AND ACCESSORIES
UseProfessional securing of manual tools and small parts by means of ultra-light self-retracting securing lines. Easy to handle with various application options thanks to compact size and useful loads of up to 2.6 kg.
Product features• Material: special wire 0.5 mm or nylon spectral• Impact-resistant ultra-light plastic casing• Click-fastener for simple and fast tool release and change • Attachment variant '360°' for simple clipping onto, e.g. material D-rings
or the strap on the body harness• Tool attachment optional with TOOL RING or TOOL LANYARD• Optional: extension length can be locked into position• Colour: black
JOJO 170• Max. useful load: 170 g• Max. extension length: 70 cm• Incl. JOJO TOOL RING, clip 360°, steel pull-out
JOJO 340• Max. useful load: 340 g• Max. extension length: 63 cm• Incl. JOJO TOOL LANYARD, clip 360°, nylon pull-out JOJO 700• Max. useful load: 700 g• Max. extension length: 80 cm• Incl. JOJO TOOL LANYARD, clip 360°, nylon-Kevlar pull-out, Stop-function JOJO 1000• Max. useful load: 1,000 g• Max. extension length: 50 cm• Incl. JOJO TOOL LANYARD, clip 360°, stop-function, nylon-Kevlar pull-out JOJO LINE• Elastic tool locks made of textile webbing• Max. useful load: 2,600 g• Min. extension length: 60 cm• Max. extension length: 100 cm• Incl. JOJO TOOL LANYARD, karabiners
Accessories• JOJO TOOL RING: Key ring for attachment of the tool (for JOJO 170)• JOJO TOOL LANYARD: Textile, elastic loop for attachment of the tool,
length: 19 cm (for JOJO 450, 700, 1000 and JOJO LINE)
Tool safety JOJO
Tool safety JOJO Art. NºJOJO 170 100 1083 JOJO 340 100 1085JOJO 700 100 1087JOJO 1000 100 1089JOJO LINE 100 1092JOJO TOOL RING 100 1091JOJO TOOL LANYARD 100 1093
JOJO TOOL RING JOJO TOOL LANYARD
JOJO 170
JOJO 340
JOJO 700 / 1000
JOJO LINE
121FALLSTOP® SAFETYCLOTHING AND ACCESSORIES
AH
ARNESS
SYSTEMS
I RESCU
E D
EVICESE
ROPES
M D
EVICE/ROPE
PROTECTIO
N
SETSC
ENERG
Y ABSO
RBERSK
MO
BILE AN
CHO
R D
EVICESG
RETRACTABLE TYPE FALL ARRESTERS
BSECU
RING
SYSTEM
SJ
VERTICAL- FALL-ARRESTIN
G
SYSTEMS
F SLINGS + LANYARDS
N CLO
THIN
G
AND
ACCESSO
RIESD
ABSEILING
/ PO
SITION
ING
D
EVICEL
ACCESS SECU
RING
SYSTEM
SH
KARABINERS,
SAFETY HOO
KS, ACCESSO
RIES
Headlamp BO-LIGHT PRO
Headlamp BO-LIGHT MINI
Headlamp BO-LIGHT MINI Art. Nº 1000275
Headlamp BO-LIGHT PRO Art. Nº 1000900
UseSmall ultralight headlamp with splashwater-protected housing.Optimum light range thanks to LUXeon LED with optical diffusor.
Product features• Light range max. 85 m• 1 LUXeon LED in white with optical diffusor that can be rotated• 2 e-saving LED in white for economy mode• 1 tactical red light LED• Splashwater-protected housing• Adjustable, rubber-coated elastic band• 1 AA battery• Colour: black
Technical data• Weight: 49 g
UseHeadlamp with High-Lux CreeXeon LED for large light range. Battery com-partment at the back of the head for optimum weight distribution.
Product features• Light range max. 185 m• 1 High-Lux CreeXeon LED white• 2 e-saving LED in white for economy mode• 1 tactical red light LED• 1 red light LED with flashing and continuous mode• Splashwater-protected housing• Adjustable, rubber-coated elastic strap• Additional, adjustable crown strap• 3 AA batteries• Colour: black
Technical data• Weight: 185 g
THE ORIGINAL
ENHANCED PERFORMANCE
122FALLSTOP® SAFETYCLOTHING AND ACCESSORIES
LED-headlamp ATEX ZONE 0
UseSmall compact headlamp for excellent illumination. Easy to operate even when wearing gloves. Soft elastic band for comfort even without helmet.
Product features• 60 Lumen• Lighting duration: 10 hours• 3 AAA batteries• Helmet band made of non-slip rubber• Approved for EX-zones: II 1 D/G EX ia IIC T4, EX iaD 20• Colour: black
Technical data• Weight: 116 g LED-headlamp ATEX ZONE 0 Art. Nº
1000871
Headlamp SECA 800
Headlamp SECA 1400
UseVery flat headlamp with optimum light yield.
Product features• Light intensity and duration: 800 Lumen, 2 hours, 400 Lumen, 4 hours,
200 Lumen, 8 hours• 2L Li-Ion battery / charging time 5 hours• Headband made of non-slip wind-repellent neoprene• Headband with adapter for lamp (front) and battery (behind)• Waterproof housing• Cable connections• Can also be attached to a cycle handlebar
Technical data• Weight: 369 g
UseVery flat headlamp with optimum light distribution thanks to the special biconic reflector.
Product features• Light intensity and duration: 1400 Lumen, 2:30 hours / 700 Lumen,
5 hours / 350 Lumen, 10 hours• 6-cell Li-Ion battery / charging time 7 hours• Headband made of non-slip wind-repellent neoprene• Headband with adapter for lamp (front)• Waterproof housing• Cable connections• Battery worn separately with a long adapter cable • Can also be attached to a cycle handlebar
Technical data• Weight: 579 g
Headlamp SECA 800 Art.- Nr. 1003542
Headlamp SECA 1400 Art.- Nr. 1003543
123FALLSTOP® SAFETYCLOTHING AND ACCESSORIES
AH
ARNESS
SYSTEMS
I RESCU
E D
EVICESE
ROPES
M D
EVICE/ROPE
PROTECTIO
N
SETSC
ENERG
Y ABSO
RBERSK
MO
BILE AN
CHO
R D
EVICESG
RETRACTABLE TYPE FALL ARRESTERS
BSECU
RING
SYSTEM
SJ
VERTICAL- FALL-ARRESTIN
G
SYSTEMS
F SLINGS + LANYARDS
N CLO
THIN
G
AND
ACCESSO
RIESD
ABSEILING
/ PO
SITION
ING
D
EVICEL
ACCESS SECU
RING
SYSTEM
SH
KARABINERS,
SAFETY HOO
KS, ACCESSO
RIES
O126 Helmets128 Helmet accessories
HELMETS 124FALLSTOP® SAFETY
Helmets
HELMETS 125FALLSTOP® SAFETY
OH
ELMETS
Working at height helmet PHEOS ALPINE UseThe helmet has all the properties required in a climbing helmet used when working at heights and is therefore approved for use in industrial operations. It provides reliable protection against falling objects, swinging loads and impacts. It sits securely in the event of a fall thanks to the forked chin strap and optimised fit.Also suitable as a construction helmet.
Product features• Light helmet shell made of acrylonitrile butadiene styrene (ABS)• Forked chip strap with high breaking load• 6-point textile cradle• Stepless size adjustment via rotary knob• Euroslot holders on the side (30 mm) for attaching ear muffs• Attachment slot for headlamp (safety lamp)• Inserts for attaching the visor• Clips for attaching other parts with an elastic strap• Temperature stable from –30° C to +50° C• Colour: white, black
Technical data• Weight: 464 g • Size: 52–61 cm head circumference
Working at height helmet PHEOS ALPINE EN 12492 / EN 397 Art. NºPHEOS ALPINE white 1000863_F001PHEOS ALPINE black 1000863_F002
The helmet is one of the oldest pieces of protection known to man, dating back to the 3rd century BC. Even then, people tried to protect the sensitive head against attacks with weapons. Over time, hel-mets have been used in other situations, not just fights. It has become a standard piece of equipment for recreational activities, e.g. cycling, winter sports, motorcycling, but also at work – be it the classic helmet at the building site, helmets used by the fire service or at elevated workplaces, e.g. wind turbines, on a mast etc. A hel-met is essential!
As the versatility of the helmet has grown, the requirements for hel-mets have also grown more specific. Does the helmet need to offer protection against falling parts? Or protect against impacts or a fall? Standards such as the EN 397 or the EN 12492 help users to find the right model. Today, modern materials and production processes not only focus on the function of the helmet, but also on important aspects such as comfort and design. Ultimately, we all want to look as good as we can.
Helmets
ENHANCED PERFORMANCE
126FALLSTOP® SAFETYHELMETS
Helmet PHEOS S-KR
UseHelmet in sporty modern mountain climbing design.
Product features• 4-point chip strap acc. to EN 397 (pre-mounted)• Short peak (no rain groove)• Stepless size adjustment via inner rotary knob • Full-vision glasses clip• Adapter openings to attach PHEOS accessories
Accessories• Ear muffs 2H / Ear muffs 3H: reliable ear protectors with small, light
muffs. Optimum fit thanks to two-point attachment and steel bracket. Available in insulation values: 28 dB or 31 dB
• Visor made of extremely light plastic with transparent, anti-fog and easy-to-replace lens; protects against stray light arcs
• Colour: white, black
Technical data• Weight: 398 g• Size: 52–61 cm Kopfumfang
Helmet PHEOS S-KREN 397 Art. NºPHEOS S-KR white 1002779_F001PHEOS S-KR black 1002779_F002
PIMP my PHEOS
Design your PHEOS as you want. You can simply adhere the adhesion film in various designs to the side of your PHEOS.
Select from the various motifs in black and white
Available motifs• Climber• Wind
127FALLSTOP® SAFETYHELMETS
AH
ARNESS
SYSTEMS
I RESCU
E D
EVICESE
ROPES
M D
EVICE/ROPE
PROTECTIO
N
SETSC
ENERG
Y ABSO
RBERSK
MO
BILE AN
CHO
R D
EVICESG
RETRACTABLE TYPE FALL ARRESTERS
OH
ELMETS
BSECU
RING
SYSTEM
SJ
VERTICAL- FALL-ARRESTIN
G
SYSTEMS
F SLINGS + LANYARDS
N CLO
THIN
G
AND
ACCESSO
RIESD
ABSEILING
/ PO
SITION
ING
D
EVICEL
ACCESS SECU
RING
SYSTEM
SH
KARABINERS,
SAFETY HOO
KS, ACCESSO
RIES
Accessories PHEOS
Accessories PHEOS Art. NºReflection set M PHEOS 1003356Ear muffs 2H PHEOS 1003357Ear muffs 3H PHEOS 1003634Winter hat PHEOS 1003087
Reflection set MHighly reflective label set, very bright thanks to prism film. Simple to attach.
Ear muffs 2H / Ear muffs 3HReliable ear protectors with small lightweight ear muffs.Optimum fit with two-point attachment and steel bracket. Available with the insulating values 28 dB or 31 dB.
VisorSturdy visor made of extremely light plastic with colourless, non-fogging and easy to exchange transparent protector. Protects against stray arc lights.
Winter hatPleasant to wear below the helmet when the weather is cold.
Reflection set M
Winter hat
Visor
Ear muffs 2H / Ear muffs 3H
128FALLSTOP® SAFETYHELMETS
Helmet HELIUM
UseUniversal safety helmet e.g. for working at height, scaffolding construc-tion, rescue and intervention.
The helmet offers reliable protection against falling objects and severe impacts on the head after a fall. The high impact-absorption properties of the inner shell withstand several vertical impacts and impacts when the head is tilted forwards, backwards or to the side.
Product features • Material: UV-stable polyalomer• Inner shell with high impact absorption properties• 3-point safety strap, also suitable for people with glasses• Adjustable strap position • Padded chin strap• Detachable, washable comfort padding• Attachment option for headlamp• Large ventilation channels and openings• Stepless size adjustment via a rotary knob • Temperature-stable from –35 °C to +35 °C• Colour: citro
Technical data• Weight: 350 g• Sizes: 53–62 cm head circumference
Helmet HELIUMEN 12492 Art. Nº 1000781
THE ORIGINAL
129FALLSTOP® SAFETYHELMETS
AH
ARNESS
SYSTEMS
I RESCU
E D
EVICESE
ROPES
M D
EVICE/ROPE
PROTECTIO
N
SETSC
ENERG
Y ABSO
RBERSK
MO
BILE AN
CHO
R D
EVICESG
RETRACTABLE TYPE FALL ARRESTERS
OH
ELMETS
BSECU
RING
SYSTEM
SJ
VERTICAL- FALL-ARRESTIN
G
SYSTEMS
F SLINGS + LANYARDS
N CLO
THIN
G
AND
ACCESSO
RIESD
ABSEILING
/ PO
SITION
ING
D
EVICEL
ACCESS SECU
RING
SYSTEM
SH
KARABINERS,
SAFETY HOO
KS, ACCESSO
RIES
P132 Transport containers134 Tool bags 135 Material rucksacks136 Load pulley LH100136 Storage packaging
TRANSPORT AND STORAGE 130FALLSTOP® SAFETY
Transport andstorage
TRANSPORT AND STORAGE 131FALLSTOP® SAFETY
PTRAN
SPORT
AND
STORAG
E
UseThe versatile transport sacks to protect safety equipment from the wet, dirt and other damaging influences.
Product features• Material: high-quality PVC-coated PA fabric• Extra-strong round bases• Seams are welded in a high-frequency process without any seam
perforation to ensure that they are absolutely waterproof• Stepless and waterproof roll-fastener system• Absolutely water and dust-proof• High chemical resistance to oils, petrol, acids and lyes• Can be folded and bent, even at very cold temperatures• Rot-proof• Colour: red / transparent
TRANSPORT DRYPACKArt. Nº 1000286 1000288 1000289 1000290Volume 6 l 20 l 40 l 40 l with Shoulder strapsWeight 175 g 350 g 420 g 550 gmax. filling height 38 cm 75 cm 88 cm 88 cm Base ø 19 cm 22 cm 26 cm 26 cm
Tool storage FOLDING BUCKETArt. Nº 1000872Volume 10 lWeight 850 gSIze 38 x 25 x 25 cm
Transport sack HARNESS POUCHArt. Nº 1000073Dimensions 35 x 20 x 20 cmWeight ca. 328 g
Use For transporting material and tools at elevated workplaces. Ideal in com-bination with the load holder deflection pulley.
Product features• Strong PVC base prevents fast wear and ensures that tools cannot fall
out• Can be folded down flat• Colour: red /black
UseUseful accessory for storing and transporting a body harness with a lan-yard or energy absorber rope. The adjustable bag fastener prevents small parts from falling out involuntarily. Model in a special design with few load-bearing seams.
Product features• Material: very strong, nylon-reinforced PVC tarpaulin material• Length-adjustable shoulder strap• Mount backed with strap material for reinforcement• Recommended load: up to approx. 5.0 kg• Colour: black
Transport DRYPACK
Tool storage FOLDING BUCKET
Transport sack HARNESS POUCH
132FALLSTOP® SAFETYTRANSPORT AND STORAGE
Device case FALLSTOP
Transport container
Transport sack ZIPPACK
Device case FALLSTOPArt. Nº 1000640Weight 3000 gDimensions 39 x 28 x 19 cm
Transport containerArt. Nº 1000949 1000873Dimensions 35 x 25 x 31 cm 85 x 45 x 35 cm
TRANSPORT SACK ZIPPACKArt. Nº 1000641Volume 40 l
Use Transport sack made of extremely sturdy Cordura with inner compart-ments. The padded shoulder straps mean that the ZIPPACK can be worn like a rucksack.
Product features• Colour: black
UseA classic product from BORNACK for the past 50 years, and copied many times.Sheet steel painted in red to protect against impacts.
Product features• Material: painted sheet steel• Colour: red
Use Light transport container made of aluminium with large storage volume.
Product features• Colour: silver
133FALLSTOP® SAFETYTRANSPORT AND STORAGE
PTRAN
SPORT
AND
STORAG
EA
HARN
ESS SYSTEM
SI
RESCUE
DEVICES
ERO
PESM
DEVICE/RO
PE PRO
TECTION
SETS
CEN
ERGY
ABSORBERS
K M
OBILE
ANCH
OR
DEVICES
G RETRACTABLE TYPE FALL ARRESTERS
OH
ELMETS
BSECU
RING
SYSTEM
SJ
VERTICAL- FALL-ARRESTIN
G
SYSTEMS
F SLINGS + LANYARDS
N CLO
THIN
G
AND
ACCESSO
RIESD
ABSEILING
/ PO
SITION
ING
D
EVICEL
ACCESS SECU
RING
SYSTEM
SH
KARABINERS,
SAFETY HOO
KS, ACCESSO
RIES
Use Permanently open attachable Velcro fastener flap to allow frequent access.
Product features• Material: CORDURA®• Leather-reinforced base• Attachment to the tool D-ring by means of reinforced sewn-on
karabiners • Pocket for small parts with open attachable Velcro fastener flap• Hammer loop• Inner elements in a light colour• Colour: black
Tool bag HEAVY DUTYArt. Nº 1000874Volume 8.4 lWeight 600 gDimensions 24 x 35 x 10 cm
TOOL BAG TEXTIL IArt. Nº 1000875 1000876Attachment Textile loop KarabinerVolume approx. 7 l approx. 7 lWeight 620 g 620 g Dimensions 38 x 25 x 8 cm 38 x 25 x 8 cm
TOOL BAG TEXTIL IIArt. Nº 1000877 Volume approx. 7 lWeight 710 gDimensions 38 x 25 x 8 cm
Use Permanently open attachable Velcro fastener flap to allow frequent access.
Product features• Material: CORDURA®• Fastener flap• Hammer holder• Pocket for small parts• Inner snap fasteners and additional Velcro fastener
(dual-safety attachment)• Colour: black/red
Use Permanently open attachable Velcro fastener flap to allow frequent access.
Product features• Material: CORDURA®• Fastener flap• Hammer holder• Pocket for small parts• Inner snap fasteners and additional Velcro fastener
(dual-safety attachment)• Colour: black
Tool bag HEAVY DUTY
Tool bag TEXTIL I
Tool bag TEXTIL II
134FALLSTOP® SAFETYTRANSPORT AND STORAGE
Use Ideal for stowing ropes and also body harnesses. The unfolded tarpaulin is equipped with additional Velcro fastener loops to ensure that single-part body harnesses in particular are 'ready for immediate use' and there is no need to untwist them first. Arrange the harness onto the tarpaulin, affix with the Velcro fasteners, fold, roll up - ready. When unrolled, the belt is still in its operational position.
Product features• Material: CORDURA® 500• Colour: blue/black
Rope and harness sack BORNACK
Rope and harness sack BORNACKArt. Nº 1000878Volume approx. 35 lWeight approx. 200 gDimensions approx. 40 x 25 x 25 cm, Plane 120 x 90 cm
Rucksack GUIDE 45PLUS
Rucksack GUIDE 45PLUSArt. Nº 1000879Volume approx. 45 lWeight 1700 g
Rucksack GUIDE 30PLUSArt. Nº 1000880Volume approx. 30 lWeight 1000 g
UseRucksack with various pads to ensure comfort when worn for a long time / on long marches.
Product features• Material: high-quality Macrotex / Duratex• Lid and inside pocket with sturdy zip• Compression straps on the side• Two separate outer pockets• Lower base compartment accessible from the outside • Additional attachment straps• Ergonomic pads on the back elements with back pads• Padded hip strap• Front chest strap (detachable)• Colour: red/black
UseRucksack with various pads to ensure comfort when worn for a long time / on long marches.
Product features• Material: high-quality Macrotex / Polytex• Height-adjustable contour lid• Length-adjustable with lid pocket strap• Compression straps on the side and mesh pockets• Two separate outer pockets with sturdy two-way zips• Ergonomic pads on the back elements with back pads• Padded hip strap• Ergonomically shaped and padded shoulder straps with position
adjustment feature • Front chest strap (detachable)• Helmet can be attached on the outside• Colour: red
Rucksack GUIDE 30PLUS
135FALLSTOP® SAFETYTRANSPORT AND STORAGE
PTRAN
SPORT
AND
STORAG
EA
HARN
ESS SYSTEM
SI
RESCUE
DEVICES
ERO
PESM
DEVICE/RO
PE PRO
TECTION
SETS
CEN
ERGY
ABSORBERS
K M
OBILE
ANCH
OR
DEVICES
G RETRACTABLE TYPE FALL ARRESTERS
OH
ELMETS
BSECU
RING
SYSTEM
SJ
VERTICAL- FALL-ARRESTIN
G
SYSTEMS
F SLINGS + LANYARDS
N CLO
THIN
G
AND
ACCESSO
RIESD
ABSEILING
/ PO
SITION
ING
D
EVICEL
ACCESS SECU
RING
SYSTEM
SH
KARABINERS,
SAFETY HOO
KS, ACCESSO
RIES
Use The load pulley LH100 allows ergonomic and rational material transpor-tation: no second person required for transport tasks. Deflection roller with return stop for secure lifting and lowering of tools and materials to elevated assembly workplaces. The automatic centrifugal lock allows posi-tioning of the load at any required work position and prevents uncont-rolled falls. Breaking strength: over 10 kN.
Product features• Load pulley LH 100 with centrifugal lock• Karabiner to hook on the load pulley• Rope handle to facilitate pulling of larger loads • Non-elastic kernmantel rope 10.0 mm with end connection and
karabiner • Optional: Swing jib, can be attached to scaffold pipes D = 50.0 mm
(useful load max. 100 kg)• Optional: Support pipe, H = 2.0 m, with 2 scaffold clamps for clamping
to scaffolds, railings etc.• from 30.0 m rope length LH100 3:1
Use The CLIMATE PACKAGING can be used to protect protective equipment against damp, UV radiation and dirt. The aluminium composite packaging Is welded airtight and therefore offers optimum storage conditions.
Product features• Temperature-resistant –40° to +80° C• Corrosion protection up to 5 years
Load pulley LH100 Art. NºLH100 20 m 1000605_M020LH100 3:1 30 m 1000317_M030LH100 3:1 100 m 1000317_M100LH100 3:1 180 m 1000317_M180
Storage packaging CLIMATE PACKAGING on request
Load pulley LH100
Storage packaging CLIMATE PACKAGING
Moisture indicator
THE ORIGINAL
136FALLSTOP® SAFETYTRANSPORT AND STORAGE
The European standards are a basic requirement for free trade between Member States of the EU and for standardising health & safety regulations.
Personal protective equipment (PPE) is split into three classes:• Class I No risk• Class II Risk to health• Class III Risk to life
Rope protection (PPE against falls) belongs to Class III.
The equipment is subject to type testing by a notified offices based on the EN standards. The manufacturer confirms the con-formity of the on-going production with the type test by attach-ing the CE label and the declaration of conformity.
The production of Class III PPE components is also subject to addi-tional production monitoring by a notified office and/or a moni-tored quality assurance system.
EG Directives• 89/686/EWG
Manufacturer guidelines for PPE• 89/656/EWG
User guidelines for PPE
EN standards for personal fall protection equipment• EN 341 Abseiling devices• EN 353-1 Vertical-fall-arresting device with a rigid anchor line• EN 353-2 Guided type fall arrester on a flexible anchor line• EN 354 Lanyard• EN 355 Energy absorber• EN 358 Work positioning belts• EN 359 Restraint systems• EN 360 Retractable type fall arrester• EN 361 Full body harnesses• EN 362 Connectors (karabiner)• EN 363 Arrester systems• EN 364 Test methods• EN 365 User manual requirements• EN 795 Anchor constructions• EN 813 Sit harnesses and accessories• EN 1496 Rescue lifting devices• EN 1497 Rescue harnesses• EN 1498 Rescue loops• EN 1891 Kernmantel ropes with low expansion• EN 12277 Mountain climbing harnesses
BORNACK FALLSTOP® has more than 50 years of experience in personal fall protection equipment and its numerous innovations have set standards for the current state-of-the-art.
EN – European standards
137FALLSTOP® SAFETYNORMEN
PTRAN
SPORT
AND
STORAG
EA
HARN
ESS SYSTEM
SI
RESCUE
DEVICES
ERO
PESM
DEVICE/RO
PE PRO
TECTION
SETS
CEN
ERGY
ABSORBERS
K M
OBILE
ANCH
OR
DEVICES
G RETRACTABLE TYPE FALL ARRESTERS
OH
ELMETS
BSECU
RING
SYSTEM
SJ
VERTICAL- FALL-ARRESTIN
G
SYSTEMS
F SLINGS + LANYARDS
N CLO
THIN
G
AND
ACCESSO
RIESD
ABSEILING
/ PO
SITION
ING
D
EVICEL
ACCESS SECU
RING
SYSTEM
SH
KARABINERS,
SAFETY HOO
KS, ACCESSO
RIES
A height worker suspended in rope equipment in an exposed situ-ation at a great height needs to have absolute faith and trust in his own skills, in his ability to work at heights, but especially in his equipment. He needs to trust that this rope protection equipment was not produced to minimum standards as cheaply as possible, but that this equipment offers maximum safety with correspond-ing reserves, i.e. the strength and functional properties of the products, and also the experience and care exercised by the peo-ple who develop, design, test and manufacture the products.
Standards form a solid base acting as minimum requirements in terms of equipment performance and function. Standards, such as the ISO 9001, can 'control' the daily processes; what remains is the quality of the version and the creativity of the innovations as they are used by humans – people for people.
Made in GermanyThe Germans, and especially the Swabians, have a reputation for absolute precision and conscientiousness which is why many BORNACK products are “Made in Germany”. They are developed on site and produced at the company's own production facility. For customers at home and also abroad, this is a seal of approval that defines the quality of the BORNACK brand.
But where does »Made in Germany« start?The value creation chain of a rope protection product is long: • Product idea and research• Design and development• Craftsmanship production of prototypes• The use of state-of-the-art materials• Development and application of modern, new production tech-
nologies
In all 5 stages, technical expertise and creativeness lead to innova-tive products! Innovation within the meaning of safety and dura-bility. BORNACK endeavours to keep all 5 stages in-house or at least to work with longstanding known cooperation partners.
Designed by BORNACKRight from the start, we produced products 'Designed by BORNACK' to satisfy our own standards. We always incorporated the input of know-how and experience from other application markets across the world. We still maintain cooperations with partners from abroad that resulted from this time many decades ago.
However, times have changed since the markets were opened to create a European market and as a result of the globalisation pro-cess. Companies have been taken over and BORNACK has lost them as a partner. Production capacities were transferred to “cheap labour” countries where quality cannot be controlled. Products need to satisfy international standards: uniform func-tions and sizes for everyone across the world? – that is not a phi-losophy to which BORNACK subscribes.
We want to maintain our standards for the German market and, to our great surprise, we have found that people in other coun-tries also trust the BORNACK products 'Made in Germany'. This vindicates our strategy to bring even more important production steps into our own production facility.
All products “Made in Germany” are marked accordingly in this catalogue. Do you want to find out more about BORNACK's pro-
duction philosophy?
Please visit our website where you can browse through our OBEN BLEIBEN (Stay on Top) Magazine No. 11 or visit the BORNACK world on YouTube.
BORNACK – A sign of quality
<Quality work in the BORNACK headquarters in Ilsfeld
138FALLSTOP® SAFETYMADE IN GERMANY
How product ideas are born – they key is creativity
State-of-the-art materials
Fall trials with an articulated dummy in the HOCHWERK®From the prototype through to series maturity – BORNACK employ-ees are passionate about what they do
139FALLSTOP® SAFETYMADE IN GERMANY
BORNACK inspects and repairs your equipment
All rights and technical changes reserved. We assume no liability for any printing errors. The dimensions and infor-mation correspond to the current state-of-the-art. Reprint-ing or duplication, even excerpts are only permitted with our written consent.
© 2015 BORNACK Zentrale Bustadt 3974360 IlsfeldGermany
Text BORNACK GmbH & Co. KGDesign B612 GmbH Konzeptionelles GestaltenPrint Offizin Scheufele Druck und Medien
GmbH & Co. KG
BORNACK GmbH & Co. KGBustadt 3974360 IlsfeldGermany
Fon + 49 (0) 70 62 / 26 90 0-0Fax + 49 (0) 70 62 / 26 90 0-550
BORNACK SchweizOholten 75703 Seon, AGSwitzerland
Fon + 41 (0) 62 / 886 30-40Fax + 41 (0) 62 / 886 30-41
© B
ORN
ACK
2015
. Sub
ject
to te
chni
cal c
hang
es.