8/6/2019 Falcon - Alarm System that will fit any type of
vehicle.
1/2
The Falcon is a highly advanced, high end, ull-eatured
alarm system that will ft any type o vehicle.The Falcon system
oers a large variety o eatures including engine kill, immobilizer,
keypad and the
possibility to use it with the original remote control o the
vehicle (manuacturer remote control).
When interaced with the MTS AVL system, it oers unlimited
eatures and ull OTA control rom the
service center.
The Falcon is designed to meet strict automotive standards or
durability, power consumption, and
temperatures. The system is supplied with a wireless cut unit, a
keypad and a unction remote control
(to be determined by clients needs).
Features and Benefts
Increased vehicle saety
Can be operated by the vehicles original remote control
Very fexible - can be installed in any type o vehicle
Programmable
Modular: SNet (one wire Spetrotec communication or multiple
accessory installations), wireless cut
unit, keypad, unction remote control, code remote control, and
engine kill
Can be controlled rom the service center when installed with MTS
AVL system
8/6/2019 Falcon - Alarm System that will fit any type of
vehicle.
2/2
Controller PIC18F4620/4680
Inputs/Outputs Main connector (24 pin)
Inputs 2 power in lines
Ignition (positive)
Door (negative/positive)
Hood (2) (negative)
VSS (vehicle speed sensor)
3 wires to record cars original remote control
Outputs Status LED
Blinkers (1 input line, 2 output lines R+L)
Central lock (5 wire or all car lock/unlock types)
Siren/Speaker line-out
Timer negative output line or Window liter
Auxiliary negative output or trunk release
Arm-out negative output (or external cut relay)
Panic negative input
SNET - single wire bus or serial communication with external
devices
Detector connector (3 pin):
2 power out lines
Detector input negative line
Keypad connector (4 pin):
2 power out lines SNET - single wire bus or serial
communication
Ignition out line
CANBUS connector (4 pin):
CAN - H.
CAN - L.
Additional connector (6 pin):
RS232/RS485/SNET (optional or AVL units)
2 power out lines
Serial Communication RS232/RS485 (optional)
CANBUS (optional)
SNET - single wire bus or serial communication to
optionalaccessories such as keypad or immobilizer
RF Components Onboard RF Transceiver 433.92 MHz (optional)
Other Components Built-in 30A cut-o relay (optional)
Blinkers dual onboard relay
2 central car lock relays (optional)
Electrical Characteristics
Operating Voltage 8V-32V DC
Current Consumption Standby mode (ARM) ~ 15 mA.
Other Characteristics
Temperature Range
Normal Operation: -30C to +80CDimensions (HxWxL) 23x77x93 mm
Weight 0.115 Kg
Enclosure Plastic case
Feature Description
