Upload
pedro-macedo
View
228
Download
6
Tags:
Embed Size (px)
Citation preview
Copyright © 2013 Rockwell Automation, Inc. All Rights Reserved.Rev 5058-CO900D
FactoryTalk™ View Site EditionBuilding a better View
Official HMI of
Copyright © 2013 Rockwell Automation, Inc. All Rights Reserved.
FactoryTalk™ View Site Edition
V7.0 Release Information
Studio
Server
Client Station
Copyright © 2013 Rockwell Automation, Inc. All Rights Reserved.
FactoryTalk View v7.0Release – January 2013
Information Integration• Network View SE Station• TrendX support for FactoryTalk Historian ME• FactoryTalk VantagePoint Trend Active X support
Process Industry Support• Expanded System Topology Limits• ISA 18.2 Alarming Standard support for Shelving State• Remote Tag Based Alarming Commands• Navigation Button
Usability• Streamlined Installation Process• Cross Reference / Find and Replace in View Studio• Gradient Shading and PNG Support
3
Copyright © 2013 Rockwell Automation, Inc. All Rights Reserved.
TrendX Support for Historian ME
4
Overview
Benefits
FactoryTalk View SE’s TrendX now supports showing historical data being collected by one or more FactoryTalk Historian ME Modules
FactoryTalk View SE Distributed and Network SE Station can directly monitoring data from Historian ME module.
Data from multiple FactoryTalk Historian ME modules can be shown on one TrendX
Copyright © 2013 Rockwell Automation, Inc. All Rights Reserved.
FactoryTalk VantagePoint Trend
5
Overview
To gain better access to VantagePoint data, you can now use the VantagePoint v4.5 Trend ActiveX with FactoryTalk View SE 7.0
Benefits
All the power of the FactoryTalk VantagePoint Trend from a FactoryTalk View SE Screen
Create new trends at runtime and publish back into FactoryTalk VantagePoint model
Copyright © 2013 Rockwell Automation, Inc. All Rights Reserved.
Expanded View SE Station Capabilities
6
Overview
Benefits
Network View SE Station is a new application type selection for FactoryTalk View SE 7.0. Network View SE Station expands the capability of single HMI stations for security and data access.
No new catalog numbers – same Station license can be used
Enables View SE Station to access Network Scope products like FactoryTalk Historian ME and SE and FactoryTalk Batch
Up to 20 Network SE Stations can be configured in one FactoryTalk Directory
Can participate in a Network FactoryTalk Security strategy
Supports off-box RSLinx Enterprise Data Server that can be configured for redundancy
Network Scope FT
View SE StationView SE Distributed
Historian SE
Copyright © 2013 Rockwell Automation, Inc. All Rights Reserved.
Simplified Installation Process
7
Overview
Benefits
Brand new installation workflow that streamlines and simplifies the process of installing FactoryTalk View SE Systems
Allows user to pick main role of the target computer
Provides list of mandatory and optional installation selections per the selected role
Automates IIS installation, when required, on newer operating systems
Once all information is entered, steps through the required order of installation automatically.
Copyright © 2013 Rockwell Automation, Inc. All Rights Reserved.
Answering the Call for Larger Systems
8
Benefits
Synchronizes architecture limits to simplify decision making
Expands the number of clients and servers using FactoryTalk Alarms and Events
Removes architecture barriers to FactoryTalk Alarms and Events adoption
Overview
To meet the growing demand for larger systems, FactoryTalk View SE 7.0 has expanded past server and client limits allowed in one application
FactoryTalk A&E Clients Redundant FT View SE Server Pairs
Redundant FTAE Server Pairs
V6.1 V7.0
20
50
V6.1 V7.0
5
10
V6.1 V7.02
102.5x 2x 5x
Copyright © 2013 Rockwell Automation, Inc. All Rights Reserved.
Improved Alarm Management
9
Overview
Benefits
To align with ISA Standard 18.2, FactoryTalk Alarms and Events 2.60 will support the Shelved State.
Shelving an alarm is similar to suppressing an alarm but with an expiration time.
ISA 18.2 aligns suppress as a programmatic command that should not be exposed to an operator.
Shelved provides the benefit of allowing user to better manage their alarm strategies, make adjustments, and operate much better.
New Shelve buttons available on Alarm
Summary
Enter shelve time duration and comments
Copyright © 2013 Rockwell Automation, Inc. All Rights Reserved.
Broadening our Alarming Capabilities
10
Overview
Benefits
FactoryTalk Alarms and Events 2.60 (CPR 9 SR 6) Tag Based Alarms allows HMI Faceplates to issue alarm commands without forcing the user to go to the alarm summary
Further empowers PlantPAx faceplate capabilities for all Tag Based Alarm Commands
Remote Acknowledge was supported in 2.30 (CPR 9 SR 3)
New commands supported: Shelve, Unshelve, Enable, Disable, Suppress, Unsuppress
User can enter Logix tags for Status and Control tags to enable this capability
FTAE Tag BasedServer
Issue alarm commands from Alarm Summary and Device Faceplates
Copyright © 2013 Rockwell Automation, Inc. All Rights Reserved.
Improving Operator Effectiveness
11
Overview
Benefits
To improve operator effectiveness, we introduce a new Navigation Button and Commands that function in a similar fashion to a Web Browsers Back, Forward, and History buttons
Removes need for VBA scripting to track screens
Simplifies navigation strategies so users can quickly get to the screen they need
Offers flexibility for choosing the screens you want to track and enter a user friendly name for display in history
Supports touch friendly font sizes and language switching
Copyright © 2013 Rockwell Automation, Inc. All Rights Reserved.
Increasing Design Time Productivity
12
Overview
Benefits
FactoryTalk View Studio in 7.0 adds Find and Replace capabilities for Displays and Global Objects and a Cross Reference for finding tags throughout the system
Find and Replace searches for Tags and Strings located in objects on Displays and Global Objects
Cross Reference can find tags and strings in the Tag Database, Displays, Global Objects, Parameter files, Macros, and Data Logs.
When performing a Find All or Cross Reference, double clicking on one of the results will open the component and highlight where the tag is located
Copyright © 2013 Rockwell Automation, Inc. All Rights Reserved.
Enhanced Graphic Look and Feel
13
Overview
Benefits
FactoryTalk View SE 7.0 enables users to create better, more appealing graphics while still maintaining operator effectiveness with the new Gradient Shading capability and support for PNG graphic types.
Improve the look and feel of native View SE shapes, buttons, backgrounds, and more.
Add gradient shading in ways that enhances HMI Screens but not to distract operator from tasks
PNG Graphic types better support background transparency to make buttons stand out.
Copyright © 2013 Rockwell Automation, Inc. All rights reserved.
www.rockwellautomation.com
Follow ROKAutomation on Facebook & Twitter.Connect with us on LinkedIn.
Rev 5058-CO900C
Questions?