DANIEL JOSEPHNationality NigerianYear of Birth 1976Profession Oil & gas Projects: Design, Engineering & Construction & IMR

Engineering ManagementPosition Lead Pipeline Engineer - Pipelines, Tanks & Vessels Contact: no: +234 7046229692e-mail: the_princejoseph@yahoo.co.uk KEY QUALIFICATIONS/ Career project overview:B. Eng Mechanical Engineering Technology, with over seventeen (17) years’ experience in oil and gas Projects: Pipelines/piping manifolds, wellhead flowlines, trunk lines, cross country export pipelines, materials engineering, Design & engineering, construction, construction, pre-commissioning, and commissioning and Integrity for Greenfield & Brownfield projects. And, Design & engineering specialist and Project Engineering Management Consultancy (PMC) for onshore oil and gas (and sour gas) processing facilities, gas compression stations and gas/ water injection facilities. And, also all aspects of in subsea/offshore pipelines and risers design & engineering, construction, installation, pre-commissioning and commissioning to DNV, API RP 1111, and ASME B31.4/ 31/8, and BS-8010-II. Onshore and subsea oil and gas facilities - Design Select Studies, FEED Design, Pipeline leak detection systems for Pipelines, Detailed Engineering EPC: procurement, fabrication, construction, construction, completions & commissioning, and Inspections, Maintenance and repairs projects, with specific experience in Engineering and design and Construction support for oil and Gas Processing Facility and interfiled pipelines Construction and commissioning. Inspection, Repairs and Maintenance (IRM) Works, Refining & Petrochemical Facilities, Maintenance Project. Pipeline global buckling and mitigation studies, Pipeline end expansion and walking and mitigation studies, Cathodic Protection designs, Line Pipes procurement, external anti-corrosion coatings, concrete weight coating, and Construction Projects; Platform Manifold, facilities upgrade/Revampt Projects, Procurement, Construction and Construction (PCI): modification, Construction, replacement projects at Clients’ Onshore oil and Gas Processing Facilities EPC Project, Pre-commissioning/De-commissioning of Pipelines, pipelines and flowlines Designs experiences based on ASME B31.4, ADCO/ SHELL DEP Standards / Specs of ASME, QP standards, Kuwait Oil Company (KOC/KJOC/KGOC) Engineering Standards, SAR- Aramco Standards; API, NACE, MSS, BS and DIN and API 14A, API 6A, API 6D, NACE MR01-75,; Preparation of engineering specifications and construction tender package for projects. CSWIP Training, and. Member: ASME, NSE, HSE, ASNT-II, IMechE.Multi-client PMC/PMT Lead Pipeline Engineer - Successful execution of FEED, EPC/ EPCI - Detail engineering design designs and construction Construction and commissioning supports for onshore pipelines design engineering and Integrity. Interfiled Composite power cables Routing layout design, specifications and construction /field development projects executed in Nigeria, West Africa, Tanzania and Asia/Middle East-UAE, Kuwait, Iraq, Qatar, Oman. Prepared Onshore Pipelines EPC Construction Engineering Design Packages, Invitation to Tender (ITT) Documentation and HAZID/Risk Assessment for different pipelines construction & pre-commissioning projects, and Provide on-site pipeline engineering consultation during construction/Construction, pre-commissioning & commissioning stage. Flowlines tie-in Wellhead connections, HIPPS and associated pipelines tie-in onshore facilities trenching and construction Supervisions, completions and commissioning and system start-up. Devised new approaches to problems, and planning, schedule, and conducted works requiring independent judgment. Interface definition and management amongst different work packages, and fabrications and test locations & clients liaisonProvide engineering and general technical support and advice to Mechanical, piping, pipeline Engineering, Maintenance on matters associated with design, Construction / construction, and maintenance functions of Greenfield and Brownfield onshore oil and Gas/NGL facilities. Carried out technical reviews of client Scope of works Document for Gas Processing Facilities EPC Project; Gas/NGL plant - pipelines Tie-in modifications work in accordance with company codes and practices. Reviews test procedures and compile the necessary documentation.

DJ/113/11/2015

Provide the response to the queries from fabrication yards/assembly shops, construction site. Design reviews and contractors/vendors follow up for materials and equipment procurement and hardware fabrication Dyce, Aberdeen, UK. Undertaken personal Projects on Advanced Transient State Analysis for Sphering Studies. Review and approval of UFR/ Pipeline hydraulic performance models of each scenario from PipePhase / Pipesim and OLGA Flow assurance engineering softwares.

Career project overview:– Preparation of FEED dossier and Call for Tender (ITT) package for the onshore flowlines

systems, Pipelines, instrumentation and control systems, and hydraulic/mechanical distribution equipment, and pipelines Isolation valves, & High Integrity Pressure protection systems (HIPPS).

– design basis document, material selection, corrosion and cathodic protection philosophies and specifications and calculations for pipelines, and equipment specifications & selections

– flowlines, pipelines and umbilical and tie-in manifold piping fabrication, equipment assembly, pressure-testing, maintenance, FAT and EFAT, constructions and pre-commissioning

– Experience in basis of design (BFD), FEED, Detail Plant & Piping, and pipelines Design & Engineering, Concept Study & Feasibility Study, Cost Estimate and EPC/EMC projects for Oil and Gas – Up-Stream and Down-Stream including Human Factor Engineering, Mechanical Handling & Chemical Handling

– Ability to lead a team to carry out field and facilities production flowlines / manifolds and interface Piping, export pipelines design & engineering activities for Conceptual, Feasibility studies, FEED and EPC projects.

– FEED and detail engineering design, and specifications for constructions, Pre-commissioning, preservation of pipelines, including piggyback Constructions and procurement supports, constructions /constructions supervisions of onshore/subsea HP/HT pipelines systems and piggy-backed cables and chemical injections lines: oil and gas flowlines, export pipelines, gas injection lines.

– Multi-client PMC / PMT Lead Pipeline Engineer - Successful execution of FEED, EPC/ EPCI - Detail engineering design designs and construction Construction and commissioning supports for onshore pipelines design engineering and Integrity

– Plant & Piping design in 3D - Autoplant model and leading the 3D - Autoplant Model Review for the project,

– Plant & Piping design in 3D - PDS model (Equipments and Pipeworks),– Review and checking of piping isometrics, MTO and material specifications.– Autopipe and CAESAR II Stress analysis softwares – good use of Caesar II in 3D modelling

and stress analysis for above ground piping constructions and buried pipelines. Review and checking of Stress Analysis of pipeline/piping layout and pipe support engineering.

– Preparation, review and checking of engineering procedures, technical specifications, data sheets, piping and valve material specifications, pipe wall thickness calculations and other design calculations.

– Technical and commercial bid evaluation, Technical Queries (TQ) and Purchase Recommendation.

– Review & approval of vendor documents, calculations and drawings. – Knowledge of internationally accepted codes and standards used in piping & mechanical

systems such as ASME, API, ASTM, NACE, NFPA, MSS SP, BS, Shell DEP standards, Mobil, Total, Addax and AGIP(ENI Group) Specification etc.

– Estimation of pipeline, piping and mechanical scopes of work and man-hours.– Preparation, review and checking of design study reports, feasibility study, basis of design

(BFD), FEED, concept study and construction scope of work.– Highlighting the technical and contractual issues to the management pertaining to piping.– Co-ordination, control and supervision of design, engineering and materials control work carried

out for projects involved by piping group.

DJ/213/11/2015

– Design co-ordination with other disciplines, clients, construction groups and vendors. – Participation in design review meeting for the projects.– Assistance to the project engineer in the planning and development of the project and the

piping discipline engineering documents, engineering schedules and budgets and the continuous monitoring of these documents.

– Ensure technical adequacy of engineering and design consistent with economy, good engineering practice, and safety in design, Company Quality Management System and specific requirement of the project. Ensure compliance with the prescribed company, clients and other standards and local statutory regulations.

– Estimate and forecast man-hours and resource required to perform the work/balance work and keep discipline manager/project manager informed well in advance.

– Review of relevant project progress and cost reports.– Examine and monitor allocated project man-hour and expenditure of man-hour and institute

remedial measures when necessary.– Provide the response to the queries from construction site, fabrication yards/assembly shops.

Professional qualifications, membership and training:AutoPLANT Plant Design System XM EditionEquipment Modelling As Per Vendor Drawings & Equipment Layout. Piping Modelling As Per P&ID, Piping GA/Layout, Instrument Hook Up, Piping Material Specification. Structural Modelling of Pipe Rack Equipment Rack, Checking for Data Inconsistency of Lines and generating Data Consistency Report. Checking for Clashes & Generating Clash Report. Extraction of Isometrics in Isogen Module. Assigning of Flow Direction, Floor Penetration and Splitting Of Isometrics. Structural Modelling of Pipe Rack Equipment Rack, Panels & Plates & Temporary Platforms. Modelling of Hangers and Supports for Critical and Non Critical Lines as Per Stress Isometrics and as per Support Span Calculation. Modelling of Cap Plates for HSS, HRS, etc. Modelling of Stiffener Plates & Doublers Plates for Supports. Generation of Reports in AutoPLANT (For MTO).

Plant Design System (P.D.S)– Equipment Modelling; Piping Modelling: Sketching and Advanced Sketching.– Framework Manager; Drawing Manager.

CAESAR II and Autopipe (Stress Analysis of Pipeline/Flowlines/Piping system)– Prepare the Pipeline/Piping Model Ready for Analysis in CAESAR II.– Performing Static non-linear Analysis and Nozzle Displacement Calculations.– Performing Dynamic Analysis and fluid transient Analysis– Loop Sizing for Hot Piping on Rack.– Modify the Layout to satisfy thermal, weight & Wind loading.– Evaluation of Pump Nozzle Allowable – API 610 Processor.– Static Load case set-up – Wind load (OCC), EXP, SUS, OPE, HGR and HDR.

Proficiency in AutoCAD (2D & 3D Modelling)Proficiency in Desktop Publishing: MS Word, MS Excel, Page Maker and Corel Draw.Proficiency Certificate In Management (PMI/PMP) TrainingCorporate Member of the Nigerian Society of Mechanical Engineers (NiMechE)

EDUCATION AND PROFESSIONAL STATUSB. Eng (Hon.) Mechanical Engineering, Federal University of Tech., Owerri, Imo Sate, Nigeria –1999Level 3 HSE Cert. Production Systems engineering training by - Cameron Oil and Gas Systems.Oil and Gas - Process Engineering Training by ESOGER Engineering Solutions. Oil & gas Industry-trained Onshore Pipelines/piping & Manifold/piping stress analysis Engineer. IADC/IWCF-WellCAP_Cert. Pipelinesace & Subsea stack Supervisor, Basic Offshore Safety -Training - (BOSIET); STCW’95. NDE Techniques_ASNT II, CSWIP Training; LEEA CertifiedComputer proficiency: Proficient in Ms Office, HMI controls, MathCAD, working experience with finite element software such as Well Plan/Power Plan*, Caesar II V.5.3, AutoPipe, An Ansys, AMSE B31.3 / 4 / 8 design Spreadsheets and API Pipeline Designs Spreadsheets, Plus One. Project control

DJ/313/11/2015

- Primavera P3, Access, Monitoring project constructions and reporting, Cost and efficiency analysis, developed charts and graphs (Milestone/week, Milestone/cost, and edits and prints the report on a daily basis and Support permitting efforts. And, flow assurance - Process Application software e.g. Pipephase and Pipesim; Autodesk Inventor, Solid Works & AutoCAD. Member: Nigerian Institution of Mechanical Engineers, NiMechE; Nigerian Institute of Safety Professionals, NISP.

PROJECTS EXPERIENCE RECORD02/08/ 2015 – till date IMPaC Offshore GmBh /Arc Flash Advisors Consultancy - AN-OH to Assa Field Development: Pipeline Systems, Inter-field Cables & Pipeline Intrusion and Lead Detection Systems – Projects. - OBEN Storage Tanks and Pipelines ProjectsConsultant Lead Pipeline Engineer- Pipelines, Tanks & Vessels:  Reporting to the Project Manager: Client Lead Onshore Pipelines (Sour Gas and Multiphase well fluids) - responsible for development of FEED/Basic Design Engineering Packages, and Scope of Work for EPCs for the following Greenfield & Brownfield Projects’ pipelines listed; 1. 28” x 23km PTF to OB3 –Hydrocarbon dew pointed Gas Pipeline- Replacement Project.2. 8”x2km AN-OH to Assa Manifold(tie-in)Produced water &Condensate pipelines Brownfield Project.3. Intrusion detection and leak detection systems for the pipelines listed. Projects. Responsible for: engineering co-ordination, pipelines Design Basis, Engineering Designs and Surveys Consultants, and EPCI Contractors' Scope of works preparations to ensure for HP / HT flowlines, and Pipelines design and construction integrity. Pipeline designs: and Upheaval and Lateral Buckling, Constructions an pre-commissioning specifications and task plans. And, ITT, BID evaluations, Evaluation selection of EPC and IMR contractors and Long Lead Items Procurement.

2012 – 2015 NAMA MOTT MACDONALD (Member firm of Mott MacDonald Group)

2012 – Present Lead Pipeline Engineer - Oil, Gas and Petrochemicals Units, Abu Dhabi

03/11/ 2013 – 30/06/ 2015 Abu Dhabi Oil Co. Ltd – ADOC (JAPAN)) / Mott MacDonald – PMC Hail Field Development; Inspections, Maintenance and repairs of crude oil and gas processing facilities - projects with specific experience in onshore Well Pads and Wellhead Platforms, and artificial Islands, Wellhead Piping and interconnected flow lines, export Pipelines & interfiled Cables, and tie-in to onshore Central Processing and gas injection facilities – (SELECT STAGE and DEFINE/FEED & EPCI - EPS Project) – Abu Dhabi Oil Company Ltd –ADOC (JAPAN))PMC Lead Pipeline Engineer - Pipelines, Tanks & Process Plants (PMT/PMC):  Reporting to the Project Manager; Client PMC / PMT onshore Pipelines (Sour Gas and Multiphase well fluids)- responsible for the HAIL field early well production (tie-in) of the Hail Field- SELECT Stage, FEED, & EPCI- EPS(Greenfield & Brownfield) Projects. Responsible for: engineering co-ordination, pipelines Design Basis, Engineering Designs and Surveys Consultants, and EPCI Contractors ' Scope of works preparations to ensure for HP / HT flowlines, Pipelines design, engineering, construction and integrity. Pipeline design: Lateral Buckling Analysis and Pipeline crossing Analysis reports. Carried out / supervised analysis of flowlines, pipelines, cables / umbilical, route selection, route alignment design and stress analysis. Reviews and Approvals, specifications of pipelines and piping and equipment interfaces, for both Greenfield, the brownfield island terminals, and production, gas lift and gas injections wellhead flowlines and pipelines; and crude oil and gas processing facilities tie-in brownfield - areas and terminal Scopes; Pipelines and piping manifolds design basis- inputs & co- ordination. Managed pipeline and umbilical / cable route engineering, recommendations on change proposals; technical authority for the review and approval Contractors and Bidders technical / standard deviation requests, and sign-off of consultants ' reports, EPC contractors ' / consultants ' reports and documents, and Long Items- Procurement support for the 24 flowlines, and 3 export pipelines facilities Early Production Scheme FEED & EPCI Phases Packages.

DJ/413/11/2015

2012 – 31/10/ 2013 Nama Mott MacDonald, Abu DhabiADMA-OPCO -PMC Contract: (Umm Shaif Field- oil lines expansion Project - Offshore Pipelines & Cables)PMC Lead Pipeline Engineer (Mott Macdonald)Reporting to the Umm- Shaif Field Project Manager/Team Lead - Abu Dhabi Marine Operating Company. Responsible for engineering co-ordination in conjunction with ADMA OPCO Pipelines and Towers- DEDs for Execution of Brownfield Projects’ facilities Engineering, Inspection, Maintenance & repairs/Revamp of Topside crude oil and gas-piping and processing facilities, and pipelines networks: pipelines Design Basis- Documents, Scope of Work Definitions, Specifications and Designs, Concept reviews, reviews and Approvals of FEED / EPCI- Engineering Contractors ' design deliverables- FEED review and EPC Execution Phases of the Pipeline and risers- projects. Review of Client Select / Conceptual Designs packages, Review and Approval of Design Consultants FEED packages / EPC contractors ' technical evaluation of the constituent pipelines and umbilical / interfiled composite power cables routing and on- bottom stability design packages.Provided engineering/technical support during execution phase of the project to ensure all company approved procedures and safe work practices are followed and prepare technical queries to document all deviation from approved procedures.

All Mott MacDonald Projects worked on as Pipeline Engineer include:

Project: Feed For KGOC New Slug Catcher & Associated Facilities – KGO Gas & Condensate Export Pipelines Project: 10” Gas Pipelines And 6” Condensate Pipelines Kuwait and Saudi Arabia Joint Development Zone of Kuwait Gulf Oil Company KGOC in Kuwait and Al-Khafji joint operations (KJO) in Saudi ArabiaClient : Kuwait Gulf Oil Company (KGOC) in Kuwait

Project: EPC of Lower Fars Heavy Oil Development Program Phase-1 (60 MBOPD)" Contractor: Consolidated Construction Group (CCC)Company: Kuwait Gulf Oil Company (KGOC) in KuwaitLump sum Turnkey (LSTK) Detailed engineering design of pipeline systems interconnecting: Production Support Complex (PSC), Central Processing facility (CPF), Well Blocks 02 and 03, Infield Satellite Station (ISS), Trunk and Steam Lines, Pipelines for Export Oil, Fuel Gas, Make Up and Disposal Water, Sub Stations, New Storage Tanks along with Loading and Filling Manifolds and New Crude Oil Control Centre for the following pipelines:• Fuel Gas Pipeline: 24” – 80km - Fuel Gas Pipeline from Kadma to CPF, including Launcher Stations and Tie-ins at Kadma and Scarpers station• Export Oil Pipeline: 24” – 163km Export Oil Pipeline from CPF facility to Ahmadi South Tank farm, including Manifolds, Launchers, Receivers & Interconnecting pipelines in South Tank Farm.• Make-up Water Pipeline: 30” – 121.3km – Make-up Water Pipeline from SWWTP to CPF, including Launcher Stations and tie-in at SWWTP (Sulaibiya Waste Water Treatment Plant)• Disposal Water Trunk Lines and Branch Lines: 12” – 18.8km 3 Trunk lines, + 10” – 9.7km Branch lines - Disposal Water Pipelines to 13 Disposal wells.• Inter connecting Oil Lines: Interconnecting Oil lines – 1km approx. in STF Area.• Associated Pig Launchers/Receivers, Sectional Valve Stations, Piping, etc.

Project: FEED for Nitrogen Gas Injection (NGI)-Pure caseClient : ADCO (Abu Dhabi Company for Onshore Oil Operations) - ADNOC Group

Carry out the FEED for injection of nitrogen gas into Thammama F reservoir through dedicated wells and delivery of compressed nitrogen will be through dedicated existing pipelines/ trunk lines TL-1 &TL-5 to the dedicated wellheads in the northern part of the reservoir Field reservoir through several pipelines (new line and modifications line) of gas injection systems and gas gathering systems. The pipelines associated with NGI was designed in accordance ASME B31.8, ADCO Company standard and several Shell DEP Specification. The Lead pipeline engineer for the project and scope of work involves, design of pipeline pig launchers/receiver (Scrappers), thrust blocks and above ground pipe supports, crossovers, platforms, sow for topography survey, sow for geotechnical investigation, TBE for third party services, sub-contractor coordination, inputs to cost estimation report and inputs to EPC scope of work etc

DJ/513/11/2015

Project: FEED for BAB CO2 Injection Pilot ProjectClient : ADCO (Abu Dhabi Company for Onshore Oil Operations) - ADNOC Group

ADCO intends to study the utilization of the recovered CO2 gas for injection into the Bab field reservoir for reducing the CO2 emissions into the environment.The work involving, Carry out the FEED for CO2 injection into BAB Field reservoir that consists of several pipelines systems e.g CO2 Injection Pipeline System, Water Injection Pipeline, Oil Producer Pipeline. Design of pipe supports, pipeline pig launchers/receiver (Scrappers), thrust blocks and above ground pipe supports, crossovers, platforms, sow for topography survey, sow for geotechnical investigation, TBE for third party services and sub-contractor coordination, BOQ, inputs to cost estimation report and inputs to EPC scope of work etc. These pipelines were designed in accordance ASME B31.4, several Shell DEP Specification, ADCO Company standard, and several API Code.

Project: FEED for Gas Export Pipeline at Badra Oilfield, Iraq, owned by GAZPROMClient : Gazprom Neft Badra B.VThe works performed under this project is Design of storage tanks, and interconnecting pipelines and gas export/ Cross country pipelines carryout corrosion and material selection, Pipelines design and engineering, cathodic protection designs, recommendations for all the plant facilities including Tank ., preparation of SOW for Topography Survey and Geotechnical investigation, and and scope of works for EPC. Carried out the FEED for gas export pipeline from Badra Oilfield to Al-Zubaida Power Station, with flow rate 156 MMSCFD. The pipeline routes were crossing with some major roads and also Tigris river. The pipeline was designed in accordance ASME B31.8 and several API Code.

Project : Construction of 42" Dia Onshore Export Pipeline & Associated Works at the West Qurna Field (Phase-II), IraqContractor : Techno Engineering LimitedCompany : M/s Luke oil Company -Iraq

Design and Detail engineering for crude oil 42” export pipeline to transfer crude oil from Central Processing Facilities (CPF) to Tuba Tank Farm (TTF) at the West Qurna oilfield, Iraq.Pipeline discipline scope of work includes FEED review, detailed design engineering, and design optimization for EPC pipeline project, 103 km of export crude oil pipeline from CPF to Tuba Tank Farm. The pipeline was designed in accordance ASME B31.4 and several API related code. Pipeline, material selection, corrosion and Cathodic Protection designs, pipeline wall thickness and mechanical designs, Pipe Supports and stress analysis, anchor flange/blocks loads and displacements evaluations /definitions, pipeline Launcher & Receiver specifications and designs, Pipeline datasheets, and material requisitions, Construction specifications & drawings, SOW Topography Survey, General arrangement drawings, Cable/pipe trenching layout details, MTO, etc.

Project : FEED for ASAB Unit 6 & 7 Phase – I Development of ADCO (Oil & Water Flowlines)Client : ADCO (Abu Dhabi Company for Onshore Oil Operations) - ADNOC GroupCarry out the FEED to develop ASAB Unit 6 & 7 (which is a reservoir in the ASAB field) to deliver 15 MBOPD in phase-I as part of ADCO’s objective of increasing sustainable production capacity, through several new oil flowlines and new water injection flowlines. The pipelines systems & associated facilities with ASAB 6 & 7 was designed in accordance ASME B31.4, ADCO Company Standard, several Shell DEP Specification, and several API Code.

Project : Detailed Engineering Design for Relocation of Huwaila Bornemann MPP to Bu Hasa, Client : ADCO (Abu Dhabi Company for Onshore Oil Operations) - ADNOC Group, UAECarry out the Detailed Engineering Services, in order to facilitate the operation of the re-located Bornemann MPP which pipeline scope covers the new pipeline for Production Header Line and Test Header Line from RMS-7 to RDS-3, and several re-routing flowlines to RDS-2. The pipeline was designed

DJ/613/11/2015

01/2012 - 04/2012 ADDAX Petroleum (SINOPEC) / Cecon ASA, Norway. Ltd. Senior Pipeline Engineer Project Title: Okwori Field Development Phase 3 - interfield cables, Flowlines & pipelines Construction and commissioning.Pipelines Pre-commissioning: Okworri Field development-Phase 2012(Greenfield & Brownfield Projects’ pipelines)Scope of Work: Construction and Construction of four flowlines of total length of 12km from Sendje Berge Central Processing Facility to four well heads tie-in manifold at the Okwori Field - Design and Construction of four flowlines to tie-in manifolds. Pre-commissioning of the flowlines and Umbilicals. Responsibilities: Reporting to Reporting to the Operations/Engineering Managers. Responsible for engineering co-ordination, review and Approvals of Specifications and Designs deliverables, Repairs and Construction and Pre-commissioning procedures and Method statements for the Execution of the project Pipelines engineering, IMR, construction and Pre-commissioning Campaigns. Review, verification and approval of calculations necessary to define proper selection of material, consumable and equipment necessary to perform the construction, Hydrotesting and Pre-commissioning operation. Management and follow-up of Pre-commissioning contractor for Pre-commissioning and early production commissioning of the Okworri field- Phase. Reviewed and checked design specifications and evaluates results of the detail design calculations and analysis reports of route layouts. Review and approval of Supplier Documents such as: metering skids.

Reviews project scope of work, Client specifications and drawings in details and developconstruction procedures for test/pre-commissioning. Writing of construction and operationsprocedures for execution of Construction. Supervised and mentored other engineers and designers inexecution of project drawings to support construction procedures.And provide engineering support, review and approvals of Construction Engineering Analysis reports and Procedures and Method statements. Construction and Construction supervisions for the execution of the Flowlines and pipelines ' piggyback Fiber Optic, Methanol injection lines l; pipelines systems designed to ASME B 31.4/ 31.8 and API RP 14 E / 14C; API RP 1102, and API RP.

10/2010 - 11/2011 Leighton International Middle East PTE. Ltd. Lead Facilities Engineer - Pipelines, Tanks & Process Plants (PMC- SOCI Project-Iraq)South Oil Company, Iraq (SOCI) ICOEEP Project-Field Development: Wellhead manifold Wellhead Piping and interconnected flow lines, Pipelines & Cables, and onshore Central Processing, metering skids and export terminals facilities design and engineering including 2 Nos 48-inches cross-country pipelines installed in Parallel, inter-field lines, spools, Pipelines, spools, (Greenfield Development -Projects’ pipelines & piping) Responsibilities: Report: to Project Manager, and Facilities Engineering Manager.Reviewed and approvals of FEED, Detailed Engineering design and EPCI packages: Construction, Construction and Pre-commissioning specifications and procedures – EPCI of two 48″ parallel pipelines, 20km onshore Pipelines / Land fall Valves Stations and export metering skids, and 120km offshore sections. Dredging Designs review and approval for dredging works to achieve 48″ parallel infield/spur pipelines, landfall pipelines and landfall approach designs; and Detailed Engineering design, Construction, Construction deliverables reviews and approvals for Fabrication, ITP, FAT, Load out, transportation and construction of 1 x 48” 600MT Valve Manifold and 3 Nos of 48-in x 24-in 200 tie-in piping manifolds. Umbilical / Control systems Package Engineer: CTR/Man-Hour Estimation, Coordination and selection of OEM vendors and design packages. Technical expediting of EPC contractors' designs packages. Provide on-site pipeline engineering consultation during construction/Construction, pre-commissioning & commissioning stage. Managed pipeline, power cable route layout design & engineering, recommendations on change proposals; technical authority for the review and approval Contractors and Bidders technical / standard deviation requests, and signed-off of consultants’ reports, EPC contractors’ / consultants’ reports, and support procurement.Overseeing and follow up, review and approvals of Procedures and specifications for pipelines and tie-in export manifold and metering skids engineering design and fabrications; and pre-commissioning works to ensure compliance with specifications and contract documents.

DJ/713/11/2015

Prepared Specifications for pipelines, tie-in Manifolds construction / Fabrication and test/pre-commissioning, Construction and Operations Method Statements, Procedures and Task Plans, pre-commissioning procedures, task plans and (FAT, EFAT, and shallow water tests). Support client’s PMT team for engineering and construction packages review and approvals, specialty Vendors contact, assessment and recommendations; and expediting during FEED review and engineering Execution Phases of the projects.// review of Contractor Trend Notices and prepare Technical Position papers. Participate in meetings with Contractors on issues related with Trend Notices to clarify and defend Company position. Monitoring, review and approvals and follow-up of the activities carried out by OEM suppliers, Supervised and mentored other engineers and designers in execution of project drawings to support construction procedures. Update company on work progress and planning via daily progress report (DPR). Liaised with field Engineers.

08/2009 – 09/2010 Point Engineering Ltd. Senior Pipeline / Flowline Engineer- Engineering Design of Oso RK pipelines and manifold system designs, analysis replacement. - OSO 2Y2 Field Project (ESSO E. and P.NIGERIA Ltd.),- ADANGA 1,2 & 3 fields flowlines and pipelines replacement project(Addax Petroleum); - 12”x 24 km Ndele - Rumuji pipelines Construction- 42”x 46 km O.U.R. Export Gas Pipeline (OML 58- TOTAL E& P, Nigeria), Responsible for concept studies, FEED development and Detail Engineering & EPIC for CTR/Man-Hour Estimation, Engineering specifications, designs and construction supports for onshore cross country pipelines, in-plot/in-Plant HP/HT pipeline and tie-in Piping systems, and Construction supervisions for oil, gas/water, multi-phase onshore Sour oil and gas pipelines: pipeline gathering, distribution system and wells /facilities tie-in projects. Inspection, Maintenance & repairs/Revamps of crude oil and gas-piping and processing facilities: Pipelines route selection and alignment sheets, designs and pipeline and tie-in spools stress analysis. Undertake FEED & detailed engineering designs calculations; and piping/pipeline stress analysis and delivering of: subsea pipelines- analyses such as structural design, lateral, buckling / pipe walking, pipeline expansion analyses, spool design and stress analyses for: flowlines & pipelines. Designs based on DNV Codes and ASME B31.4/31.8 Codes and Shell DEP, API 6A;. Responsible for FEED and detailed engineering designs for the replacement of Oso RK pipelines / and wellhead tie-in manifolds of ADANGA TMMP 1,2 & 3 fields - pipelines & designs and constructions.Review of various pipeline Routes Surveys Reports: topographic & Geophysical reports; Geohazard report, Geotechnical report, Hydro logy report, area population density report and environmental assessment report (EIA). Preparation of Pipeline Design basis; Prepared designs and construction and construction specifications, and Pre-commissioning specifications of export pipelines, flowlines, tie-in spools & tie-in manifolds. Wrote engineering design basis and specifications and undertook pipeline routeing studies, stress analysis and prepared pipelines calculation notes. Undertook pipeline and piping design calculations; modelling, re-routing design and stress Analysis of the buried export/subsea pipelines, riser and topsides piping., detailed design and analyses report.

05/2008 – 08/2009 Cameron Production Systems / Point Engineering Ltd.Senior Pipeline & Manifold EngineerField production systems Engineering Design: OML-58 Field Development Project (TOTAL UPSTREAM, NIGERIA). Greenfield Projects’ pipelines and manifolds, and tie-in spool: FEED and Detailed Engineering designs of Field production systems – tie-in production manifold well flowlines. Responsibilities include: Concept review, varied field developments concepts selection, FEED, designs, design basis document, material selection, corrosion and cathodic protection philosophies and specifications. equipment specifications & selections; procurements, design specifications and detailed design calculations /procurements/construction specifications; pipelines and tie-in spools and piping stress analysis and delivering on piping manifold Valves, flowlines /pipelines, tie-in pipelines loops, design basis and specifications; and stress analysis, follow–up of fabrication, Plant approach layout and manifold approach layout design, export pipelines, flowlines,.– Detailed design of hydraulic controls system Architecture, hydraulic / chemical /electrical schematics, General Arrangement of hydraulic/chemical lines – using Autodesk Inventor model Routing, Single line isometrics. Pipelines MTO Preparation.Preparation of construction and operations specifications and procedures for pipelines and interfiled cables construction, test/pre-commissioning for: Hydraulic monitoring during lay.

DJ/813/11/2015

– Prepared designs and calculations for pipeline and piping manifold wall thickness, pipe sizing and material selection based on different codes or standards and participate in design and selection of Piping supports for the subsea production Manifold connection systems. Participate in modeling and Static and Dynamic Stress Analysis of the piping tie-in manifold: Valves, Piping systems.– Reviewed Client's supplied design documents, specifications and requirements for the flowlines, Pipelines. Design of routing; wall thickness design; upheaval buckling and road crossing designs and cathodic protection designs. HT/HP Pipeline/Riser Analysis using Excel, MathCAD, Plus One, AutoCAD and Caesar II V.5.0. riser spool pieces, pipeline walking, effect of temperature piping and flowlines / pipelines stress analysis.

08/2006 – 04/ 2008 Expro Group Ltd, Port HarcourtFlowline Engineer- Flowline and tie-in manifolds Engineering and ConstructionAddax Petroleum Okworri- Field Development Projects(Greenfield Projects) - well flowlines and export pipelines early production facilities. Engineering, construction and commissioning and – Reviews project scope of work, Client specifications and drawings in details and developedconstruction procedures for onshore / construction and test/pre-commissioning. Reviews of produced datasheets of Flowines and Piping systems stress analysis, construction andpre-commissioning specifications piping hardware and intervention packages components’ design.Prepared assembly & systems tests, FAT & Review and approval of Vendor Documents testing and operations manual for Umbilical.Reviews project scope of work, Client specifications and drawings in details and develop constructionprocedures for field production development. Writing of construction and pre-commissioningspecifications for execution of construction, Monitoring and Testing, gas injection & water Injectionflow lines. Prepared Lifting and Construction procedures for 1.5” & 2" methanol /chemical injection. Designs based on API 6 / 6D, API 14A /14 E. Supervised and mentored other engineers and designers in execution of project drawings to support construction procedures. Liaisedwith Client Engineers, third party surveyors, Construction and pre-commissioning sub-contractors, forthe project execution. Technical bid evaluation, management of contractors, design reviews and contractors/vendors follow up for materials. Execution of Specifications and Designs, constructions/ fabrications, tests & Construction engineering audits and Technical bid evaluation, design reviews, contractors / vendors follow up for materials and equipment procurement and hardware fabrication Dyce, Aberdeen, UK.

04/2003 – 08/2006 Saipem Contracting Nigeria Ltd, Port HarcourtSenior Facilities Engineer - Pipelines, Tanks & Vessels (Greenfield & Brownfield Projects-Reports to: Project Manager and Construction Superintendent.OB-OB 18” 22 KM Pipelines Project (NAOC); GTS4 36” 82KM Rumuji-Bonny Gas Pipelines (NAOC),GTS2 42” 96 KM Apara-Bonny Gas Pipelines (SHELL-SPDC), (NAOC GBARAN – UBIE Integrated Pipelines Project (SPDC)- Oil and gas flowlines and gathering systems pipelines, Water Injection and Raw Water flowlines - manifolds, Valves, umbilical, landfall pipelines sections.36" Inches Nkpoku -Bonny Export oil Pipeline/Trunckline–Responsible for Detail Engineering & EPIC on in-plot / in-Plant HP/HT pipeline & Piping systems, and Barrel Tanks Construction supervision, oil, gas/water, multi-phase onshore and offshore - Sour oil and gas pipelines: pipeline gathering, distribution system and wells /facilities tie-in projects; cross-country pipelines and tie-in to LNG plants, oil/gas facilities’ Inspection, Maintenance & repairs/Revamps of Topside crude oil and gas-piping and processing facilities monitoring and leading of onshore, marshland/landfall and Subsea pipelines sections of the pipelines systems and facility engineering and construction efforts to the requirements designed to SHELL DEP and API RP/ASME Standards / Specs of ASME, API, NACE, MSS, BS and DIN and API 14A,; API 6A, API 6D. Review of Client's supplied design documents and engineering standards; and prepared Scope of works for Pipeline routes Topographic/Geophysical and Geotechnical surveys, Pipeline detail engineering designs: Pipelines route selection and alignment sheets, designs and pipeline/risers and platform tie-in spools stress analysis. Undertake detailed engineering designs design calculations; and piping/pipeline stress analysis and delivering of: subsea pipelines- analyses such as structural design, lateral, buckling / pipe walking, free span VIV / fatigue, pipeline expansion analyses, spool design and stress analyses.

DJ/913/11/2015

– Assisted the lead project Engineer in the preparation of FEED dossier, CTR/Man-Hour Estimation and Call Sub-contracts Tender (ITT) packages for pipelines route surveys & pipeline Materials/LLI and High Integrity Pressure protection system (HIPPS). FEED & detail design activities: Prepared pipeline equipment and line pipe fittings specifications & data sheets, Design of pipelines,Field layout routing to terminal; terminal approach plot plans, piping arrangement tie-in designs,Supports designs, MTO & Material Requisitions for procurements, Constructions and Construction ofUFR, pipelines /risers and Topside termination Assembly and appurtenances. –Preparation of pipe sizing and wall thickness design calculations based on DNV OS F101 and ASME B31.8 codes; design and selection of Piping supports for the subsea production Manifold connection systems. Design of subsea production manifold piping. Pipeline/piping system modelling and stress analysis

05/1999 – 04/2003 Ozono Nigeria Limited, Port HarcourtPipeline and Piping Engineer - Greenfield & Brownfield Projects.

Pipeline and Piping Engineer - Responsible for preparing: Scope of Works for Pipeline routes and geotechnical surveys, Pipeline Designs Basis for designs, Preparation of engineering designdeliverables such as pipelines design basis, design basis document, material selection, corrosion andcathodic protection philosophies technical specifications, and Prepared Pipeline Wall thicknessdesign, piping flexibility analysis and pipeline stress analysis with CAESAR II, Version 4.5 and 5.0and Autopipe. Pipeline End thermal expansion & control analysis, upheaval buckling control, pipelines crossings calculations, elastic bending calculations, anchor loads calculations. Designs toSHELL DEP, API RP and Specs of ASME, API, NACE, MSS.: Line pipe materials, pipelines components, pipeline valves, pipelines construction, inspection, and testing, pre-commissioning &commissioning specifications. Review of procedures, witnessing of tests, construction & crossings details and construction supports and fabrication supervisions for onshore cross country pipelines, interfiled pipelines, pipeline in-plot/in-Plant HP/HT pipeline & Piping systems. Prepared data sheetsfor all pipelines components: Induction bends, pipelines, valves etc, for Client's Shell Petroleum Development Company (SPDC) pipeline facilities at Awoba, Nembe -Cawthorne oil pipelines and flowliines, and water Injection flowlines networks. oil Metering skids piping stress analysis.And followed up constructions at pipelines constructions sites/ right of way. And Barrel Tanks Construction and erection supervisions. Attended pipelines testing activities and resolvedconstruction queries. Pipelines and facilities mechanical completions: pre-commissioning,commissioning, performance test, handover red Lines / Mark-ups and As-Built specifications,Procedures/ techniques; following site visitations and preparation of CAD As-built drawings

June 1998 - Dec. 1998 Anadrill Schlumberger Ltd. (Well Engineering Trainee)Drilling / Well Planning Trainee: Engineer- trainee responsible for in-coming and out-going systems

(MWD & LWD tools) tests. Experienced on some Anadrill Pipelinesace sensors rig-up, MWD team operations experience as additional crew on RIGs:-T26, & Searex-12. Trainee Well Planner: Familiar with POWERPLAN* drilling/Well Planning software. Responsible for- planning of single directional wells: Gbaran 20 & 21, and Searex-12, wells: Soku-33, 34 & 34 horizontal Sidetrack and BHA design for Vertical. Directional and Horizontal wells, and support tasks. Updating of Bit Records dBase, for EOWRs. Interpretation of formation Lithology logs,

LANGUAGE CAPABILITY English: Spoken–fluent; written–fluent; reading—fluent

DJ/1013/11/2015