Face to Face dimensions of flanged valves acc to ASME B16.10 - Class 600

Class 150 | 300 | 600 | 900 | 1500 | 2500

NPS Ball Long Pattern

Gate Solid Wedge and Double Disc and Conduit Long Pattern

Plug Regular and Venturi Pattern

Plug Round Port Full Bore

Globe Lift Check and Swing Check Long Pattern

1/2 165 165 (1) ... ... 165 3/4 190 190 (1) ... ... 190 1 216 216 216 (2) 254 216 1.1/4 229 229 229 (2) ... 229 1.1/2 241 241 241 318 241 2 292 292 292 330 292 2.1/2 330 330 330 381 330 3 356 356 356 444 356 4 432 432 432 508 432 5 ... 508 ... ... 508 6 559 559 559 660 559 8 660 660 660 794 660 10 787 787 787 940 787 12 838 838 838 1067 838 14 889 889 889 ... 889 (3) 16 991 991 991 ... 991 (3) 18 1092 1092 1092 (4) ... 1092 (3) 20 1194 1194 1194 (4) ... 1194 (3) 22 1295 1295 1295 (4) ... 1295 (3) 24 1397 1397 1397 (4) ... 1397 (3) 26 1448 1448 1448 (4) ... 1448 (3) 28 1549 1549 ... ... 1600 (3) 30 1651 1651 1651 (4) ... 1651 (3) 32 1778 1778 (5) 1778 (4) ... ...

34 1930 1930 (5) 1930 (4) ... ... 36 2083 2083 (5) 2083 (4) ... 2083 (3)

NPS Ball Long Pattern

Gate Solid Wedge and Double Disc and Conduit Long Pattern

Plug Regular and Venturi Pattern

Plug Round Port Full Bore

Globe Lift Check and Swing Check Long Pattern

Notes:

• (1) Solid wedge only • (2) Regular pattern only • (3) Swing Check only • (4) Venturi pattern only • (5) Double disc and conduit only

General notes:

• Dimensions are in millimeters unless otherwise indicated. • The face-to-face dimension for flanged Valves is the distance between the extreme ends

which are the gasket contact surfaces. • End-to-End dimensions apply to flanged Valves where the gasket contact surfaces are not

located at the extreme ends of the Valve. The distance between the extreme ends is described as the end-to-end dimension and applies to flanged Valves like: Ring Joint, large or small female and large or small groove.