Slope Projection HEIGHT CENTER OF FASTENERS CENTER OF FASTENERS 1" X 1" X .093 ALUM TUBE FRAME (TYP.) SUNBRELLA FABRIC (TYP.) SEALANT AT TOP OF FRAME OPEN ENDS (OPTIONAL CLOSED ENDS) 1" STAPLE TUBE Z CLIP SUPPORT ARM W/ WALL PLATE HORIZONTAL SECTION BOTTOM OF AWNING Length Projection Canvas cover removed for clarity. STANDARD PLAN VIEW CANVAS AWNING STANDARD CONSTRUCTION Material: 6063 - T5 Extruded Aluminum Frame Fabrication Method: Welded & Mechanically Fastened Frame: 1" X 1" X .093 Aluminum Tube (Typ.) Fabric Fabrication Method: Sewn with Tenarathread or heat seamed Cover: Sunbrella (Typ.) (Firesist is an optional fabric upgrade.) Fascia Profile: With or Without Valance (fixed or floppy) Projection: 12" - 144" Length: Single unit up to 288", Multiple units unliminted Mounting: Exposed Outside Ends: Open or Closed Brackets: 1" Z-Clip (Typ.) Sealant: Sealant used at top of frame - If slope is greater than 36", additional framing will be required. - For large awnings, sewn pockets will be added. Custom colors and Kynar finishes available. STANDARD POWDER COAT COLORS STANDARD SUNBRELLA FABRIC COLORS Colors represented in this brochure are indicative only. Actual colors may vary. Colors represented in this brochure are indicative only. Actual powder coat colors may vary. DECK FINISH FRAME FINISH HTTPS://WWW.SUNBRELLA.COM/EN-US/FABRICS/SHADE Call: 817.926.7270 Fax: 817.926.7311 2100 E. Richmond Ave Fort Worth, TX 76104 Application Architectural Fabrication, Inc. Canvas Awnings are designed to provide a unique architectural feel to the exterior appearance of a building while providing rain and sun protection. All of our Canvas Awnings have many customizable options to best suit your project. Aluminum Tube Frame with Canvas Cover MODEL: CANVAS AWNING www.arch-fab.com Information is subject to change. Updated 3/29/2019

Fabric Awning Product Sheet - Architectural Fabrication

Download PDF Report

Upload
others
View
6
Download
0

Embed Size (px)

Citation preview

Page 1: Fabric Awning Product Sheet - Architectural Fabrication

Slope

Projection

HEIGHT

CENTER OF FASTENERS

1" X 1" X .093 ALUM TUBE FRAME (TYP.)

SUNBRELLA FABRIC (TYP.)

SEALANT AT TOP OF FRAME

OPEN ENDS(OPTIONAL CLOSED ENDS)

1" STAPLE TUBE

Z CLIP

SUPPORT ARM W/ WALL PLATE

HORIZONTAL SECTION

BOTTOM OFAWNING

Length

Projection

Canvas cover removed for clarity.STANDARD PLAN VIEW

VALANCE HEIGHT PROJ.

SLOPE

VALANCE

CUSTOM OPTIONS/DETAILS

CANVAS AWNING STANDARD CONSTRUCTIONMaterial: 6063 - T5 Extruded AluminumFrame Fabrication Method: Welded & Mechanically FastenedFrame: 1" X 1" X .093 Aluminum Tube (Typ.) Fabric Fabrication Method: Sewn with Tenarathread or heat seamedCover: Sunbrella (Typ.) (Firesist is an optional fabric upgrade.)Fascia Profile: With or Without Valance (fixed or floppy)Projection: 12" - 144" Length: Single unit up to 288", Multiple units unlimintedMounting: ExposedOutside Ends: Open or Closed Brackets: 1" Z-Clip (Typ.)Sealant: Sealant used at top of frame- If slope is greater than 36", additional framing will be required.- For large awnings, sewn pockets will be added.

Custom colors and Kynar finishes available.

STANDARD POWDER COAT COLORS

STANDARD SUNBRELLA FABRIC COLORSColors represented in this brochure are indicative only. Actual colors may vary.

Colors represented in this brochure are indicative only. Actual powder coat colors may vary.

DECK FINISH

FRAME FINISH

HTTPS://WWW.SUNBRELLA.COM/EN-US/FABRICS/SHADE

Call: 817.926.7270Fax: 817.926.7311

2100 E. Richmond AveFort Worth, TX 76104

ApplicationArchitectural Fabrication, Inc. Canvas Awnings are designed to provide a unique architectural feel to the exterior appearance of a building while providing rain and sun protection. All of our Canvas Awnings have many customizable options to best suit your project.

Aluminum Tube Frame with Canvas Cover

MODEL: CANVAS AWNING

www.arch-fab.com Information is subject to change. Updated 3/29/2019