F2-SDS-1_spec_eng

Embed Size (px)

Citation preview

  • 7/30/2019 F2-SDS-1_spec_eng

    1/2

    DL205 Specialty Modules

    464 PLC Products1 - 8 0 0 - 6 3 3 - 0 4 0 5

    SMART DISTRIBUTED SYSTEM (SDS) I/O

    OverviewIf you are already using or planning toimplement an SDS controllernetwork, using the F2-SDS-1 moduleand I/O sub-system can help reduce thecost of your overall application. TheSmart Distributed System (SDS)provides a means to connect automationequipment and devices on a singlenetwork, which eliminates expensivehardwiring. This standard communica-

    tion media and software provides a low-cost method for controllers and devicesto communicate low-level data at highspeeds. The SDS standard provides spec-ifications for information exchangebetween nodes, as well as device-leveldiagnostics not normally found in otherI/O systems. The F2-SDS-1 moduleallows the well-proven micro-modularDL205 I/O system to be controlled byyour SDS master controller.

    How it worksThe FS-SDS-1 module plugs into theCPU slot of any DL205 I/O base. Themodule maintains a database with allidentification data, diagnostic informa-tion, and parameters that are configured

    within the base and control the opera-tion of the SDS slave module and theI/O. The F2-SDS-1 slave will monitorand report discrete and analog I/Omodule data to a SDS Master. All ACexternally-powered DL205 I/O base

    units contain a 24VDC, 0.3A powersupply for simple wiring of sensors andactuators into the DL205 I/O modules,

    and for controlling them with a SDSMaster. The F2-SDS-1 module supportsall DL205 discrete and analog I/Omodules. The SDS also offers:

    Cost effectiveness: SDS offers inexpen-sive controller and industrial DL205I/O sub-system.

    Easy connectivity: SDS is low-cost, itseasy to implement and maintain wiringsystem.

    Innovative technology: Power is inte-grated into the device.

    Diagnostics: SDS offers advanced errordiagnostics not commonly found intraditional systems.

    High baud rates: Baud rate bringresponse time down to 0.10ms perdevice.

    LED indicators: Provides indication ofDL205 Smart Distributed System.

    ....

    F2-SDS-1 Slave F2-SDS-1 Slave

    Connect our micro-modular DL205 I/O

    Ask for our D2-INST-M Installation and I/O Manual for complete information about DL205 I/O modules, powerbudgeting, and installation and wiring. This manual does not cover CPU-slot controllers.

    ...with your PLC or PC-based SDS master.

    Smart Distributed

    System ModuleF2-SDS-1

    F2-SDS-1 Interface Specifications

    Module Type CPU device

    Module Location CPU slot of any DL205 base

    Number of I/ODefined by number of slots per base

    Maximum Field Devices per Bus 126 (see table next page)

    Max SDS Addresses per CPU 8 discrete, 64 analog

    Communication to Field Devices Standard 4-wire shielded cable to cabinet connector, molded 4-wirecable @ up to 1Mbps to field devices.

    Module Connector 5-position removable terminal (European style)

    Operating Environment 0C to 60C (32F to 140F), 5% to 95% humidity (non-condensing)

    Internal Power Consumption 160mA @ 5VDC

    Manufacturer FACTS Engineering

  • 7/30/2019 F2-SDS-1_spec_eng

    2/2

    465PLC Products

    DL205 Specialty Modules

    w w w . a u t o m a t i o n d i r e c t . c o m / d l 2 0 5

    I/O base and networkconsiderations

    All discrete (except 32-pt.) and analog

    I/O modules are supported by theF2-SDS-1 slave module. Specialtymodules are not supported by the F2-SDS-1 module.

    EDCBA

    D

    D

    D

    11 to 25 VDC

    PowerSupply

    User Supplied

    120

    D

    Terminal Connector

    54321

    SHIELD

    BUS --

    BUS +

    GND

    DC+

    SDS Bus Connection

    To SDS bus

    SDS I/ODL205 Style of I/O Modules Supported

    Discrete Types Analog Types

    4-point Input 4-channel Input

    8-point Input 8-channel Input

    16-point Input 2-channel Output

    4-point Output 4-channel In/ 2 channel Output

    8-point Output 4-channel Temperature

    16-point Output (includes 12 pt)

    4-point Input/4 point Output

    Trunk Length Bits/sec Branch Length DevicesFeet Meters Feet Meters

    75ft 22.8m 1Mbps 1 0.3m 64

    300ft 91.4m 500Kbps 3 0.9m 126

    600ft 182.8m 250Kbps 6 1.8m 126

    1,500ft 457.2m 125Kbps 12 3.6m 126

    Other SDS specifications, compatible products, and latest SDS literature information are made available through:

    Honeywell MICRO SWITCH DivisionInternet: http://www.honeywell.come-mail:[email protected]

    Comments to:SDS Council, IL50/B4-523Honeywell Micro Switch Division11 West Spring Street

    Freeport, IL 61032

    Phone: (800)537-6945 Fax: (815) 235-5623