Upload
others
View
1
Download
0
Embed Size (px)
Citation preview
10
278
11
AC
CE
SS
&H
AT
CH
CO
VE
RS
FO U N D RYN E E N A H
R-5900 to R-5901 SeriesSlab Frame, Grate or Lid
Heavy Duty
Sized to fit snugly into opening of corrugated pipe or similar piping.
Additional anchorage to metal pipe may be accomplished by drilling holes in the sleeve orbarrel portion of the frame and bolting the frame in place. Frames can be furnished drilledfor this purpose on special order.
For Bolted units, see R-6461-2 Series. For flange-down units, see R-1792 Series.
Dimensions in inchesCatalog No. Catalog No.Solid Lid Open Grate Pipe Size A B C DD E F G HR-5900-A R-5901-A 12 10 1/4 1 1/2 8 1/2 11 1/2 14 1/2 4 1 7/8R-5900-B R-5901-B 15 13 1/4 1 1/2 11 1/2 14 1/2 17 1/2 4 1 1R-5900-C R-5901-C 18 16 1/4 1 1/2 14 1/2 17 1/2 20 1/2 4 1 7/8R-5900-D R-5901-D 20 18 1/4 1 1/2 16 1/2 19 1/2 22 1/2 4 1 1/8 1R-5900-E R-5901-E 24 22 1/4 1 1/2 20 1/2 23 1/2 26 1/2 4 1 1/8 1R-5900-F R-5901-F 27 25 1/4 1 1/2 23 1/2 26 1/2 29 1/2 4 1 1/8 3/4R-5900-G R-5901-G 30 28 1/4 1 1/2 26 3/8 29 1/2 32 1/2 4 1 7/8R-5900-H * R-5901-H 36 34 1/4 1 1/2 32 1/2 35 1/2 38 1/2 4 1 1R-5900-J R-5901-J 42 40 1 1/2 38 1/2 41 1/2 44 1/2 4 1 1R-5900-K R-5901-K 48 46 1/8 1 1/2 44 1/2 47 1/2 50 1/2 4 1 1/16 1* Available with removable center lid, see R-1586.
WEIRSQ. PERIMETER
CATALOG GRATE FT. LINEALNUMBER TYPE OPEN FEETR-5901-A G 0.2 2.7
R-5901-B G 0.3 3.5
R-5901-C G 0.5 4.3
R-5901-D G 0.7 4.8
R-5901-E G 1.1 5.8
R-5901-F G 1.6 6.6
R-5901-G G 2.0 7.4
R-5901-H G 4.2 8.9
R-5901-J G 3.7 10.5
R-5901-K G 4.8 12.1
R-5915 SeriesTraffic Pullbox Frame, Lid
Heavy Duty
Dimensions in inchesCatalog No. A B C DD E FR-5915-B 13 1/4 1 1/2 11 1/2 14 1/2 20 4R-5915-C 16 1 1/2 14 1/4 17 1/4 23 4R-5915-E 22 1 1/2 20 1/2 23 3/8 30 4R-5915-G 28 1/4 1 1/2 26 3/8 29 5/8 37 4
F Note: When specifying/ordering grates, refer to “Choosing the proper inlet grate” on pages 117-118.For a complete listing of FREE OPEN AREAS and WEIR PERIMETERS of all NEENAH grates, refer to pages 306-311.
279
11
AC
CE
SS
&H
AT
CH
CO
VE
RS
FO U N D RYN E E N A H
R-6001 to R-6080 SeriesManhole Frame, Solid Lid
Light Duty
The manhole covers shown here, for off-the-street traffic, are specifically for use oncisterns, coal holes, wells, pumps or for inspection openings.
Lids are furnished standard with open type pickholes. However, they can be supplied withvarious types of lift handles. Fastening devices are available on special order.
Dimensions in inchesFrame
Catalog No. A B C DD E F TypeR-6001 6 1 5 6 10 3 1/2 YR-6003 9 1 8 9 12 2 1/2 YR-6005 12 1 11 12 14 3/4 2 1/2 YR-6006 13 3/4 11 3/4 14 17 2 1/2 WR-6007 14 3/4 12 15 20 2 1/2 WR-6008 16 3/4 15 16 20 1/4 2 1/2 YR-6010 18 1/2 16 1/2 20 22 1/2 4 WR-6011 18 1/2 17 18 22 1/4 2 1/2 YR-6012 20 1/2 5/8 18 22 1/2 24 2 1/2 WR-6020 21 1/2 1 20 24 1/2 27 3/8 4 WR-6034 23 1/2 1/2 22 23 1/2 26 1/2 3 YR-6040 24 3/4 22 23 1/4 30 3 1/2 YR-6044 25 1 22 23 1/4 28 6 YR-6044-1 23 3/4 3/4 22 1/2 25 29 1/2 4 WR-6044-A 25 1/2 1/2 24 25 1/4 30 1/2 4 YR-6070 26 5/8 3/4 25 26 1/4 31 4 YR-6077 31 3/4 3/4 30 31 1/2 36 1/2 6 YR-6077-A 31 3/4 3/4 30 31 1/2 36 1/2 3 1/2 YR-6080 33 1/2 3/4 32 33 37 4 Y
Illustrating R-6020
10
280
11
AC
CE
SS
&H
AT
CH
CO
VE
RS
FO U N D RYN E E N A H
R-6013 to R-6099 SeriesManhole Frame, Solid Lid
Heavy Duty
Lids are available with lift handles or fastening devices if specified.
Dimensions in inchesFrame
Catalog No. A B C DD E F TypeR-6013 6 1/2 1 1/4 5 1/2 6 3/4 10 2 1/2 YR-6014 * 9 1 8 9 12 2 1/2 YR-6016 * 14 1 1/4 12 13 18 3 YR-6017 17 1 1/4 15 16 21 4 YR-6017-A 18 1 1/4 16 17 22 4 1/2 YR-6018 21 2 1/2 18 20 27 1/2 5 YR-6019 * 22 3/4 1 3/4 20 23 25 4 1/2 YR-6021 23 1 1/4 20 22 29 3/4 4 YR-6030 23 1 3/4 21 22 3/4 30 4 YR-6033 23 1 3/4 21 22 3/4 30 4 YR-6035 23 1 3/4 21 22 3/4 30 8 YR-6041 24 1 5/8 22 25 1/4 30 4 WR-6041-A 24 1 5/8 22 25 1/4 30 6 WR-6041-B 24 1 5/8 22 25 1/4 30 8 WR-6050 27 1 1/4 23 1/2 25 1/2 33 1/2 4 YR-6060 26 1 5/8 24 27 36 5 WR-6065 25 3/8 1 3/4 23 7/8 26 30 6 YR-6065-A 25 3/8 1 3/4 23 7/8 26 1/8 30 1/4 8 YR-6066 27 2 1/2 24 26 33 1/2 5 YR-6067 * 27 2 1/2 24 26 33 1/2 5 YR-6074 28 1/2 1 1/4 26 1/2 27 1/2 35 3 1/2 YR-6075 29 1 3/4 27 29 35 6 YR-6078 32 3/8 2 30 32 1/2 39 1/2 6 YR-6095 * 38 1 1/2 36 38 49 4 1/2 YR-6099 50 1/2 1 48 49 1/2 54 6 Y* Furnished with Platen lid.
Illustrating R-6030
R-6052 SeriesManhole Frame, Solid Lid, U.S Government Standard
Heavy Duty
For Frame/Grate alternatives, see the R-2565 Series.
Dimensions in inchesCatalog No. A B C E F J KR-6052-A 21 2 1/2 18 27 1/2 5 2 7/8 1R-6052-C 23 1 1/4 20 29 3/4 4 2 1/2 1R-6052-D 27 1 1/4 23 1/2 33 1/2 4 2 1/4 3/4R-6052-G 27 2 1/2 24 33 1/2 5 2 7/8 1R-6052-H 29 1 3/4 27 35 6 2 7/8 1R-6052-J 32 3/8 2 30 39 1/2 6 2 7/8 1
Illustrating R-6052-G
R-6141Manhole Frame, Lid with Type F Lock
Heavy Duty
281
11
AC
CE
SS
&H
AT
CH
CO
VE
RS
FO U N D RYN E E N A H
R-6110 to R-6137 SeriesCatch Basin Frame, Grate
Dimensions in inchesFrame
Catalog No. A B C DD E F G H TypeHeavy Duty
R-6110 21 2 1/2 18 20 27 1/2 5 1 3/8 1 YR-6111 23 1 1/4 20 22 29 3/4 4 1 3/8 1 YR-6112 23 1 3/4 21 22 3/4 30 4 1 1/2 1 YR-6113 24 1 5/8 22 25 1/4 30 4 3/4 1 WR-6114 27 1 1/4 23 1/2 25 1/2 33 1/2 4 1 1/2 1 YR-6115 27 2 1/2 24 26 33 1/2 5 1 1/2 1 YR-6116 29 1 3/4 27 29 35 6 1 1 YR-6117 32 3/8 2 30 32 1/2 39 1/2 6 1 1/2 1 YR-6118 38 1 1/2 36 38 49 4 1/2 1 1 Y
Light DutyR-6130 20 1/2 5/8 18 22 1/2 24 2 1/2 1 1 WR-6131 21 1/2 1 20 23 1/2 27 4 1/2 3/4 WR-6132 24 3/4 22 23 1/4 30 3 1/2 1/2 1/2 YR-6133 25 1 22 23 1/4 28 6 1/2 1 YR-6134 26 5/8 3/4 25 26 1/4 31 4 7/8 3/4 YR-6136 31 3/4 3/4 30 31 1/2 36 1/2 6 1 1/4 1 YR-6137 33 1/2 3/4 32 33 37 4 1 1/4 1 Y
Illustrating R-6115
WEIRSQ. PERIMETER
CATALOG GRATE FT. LINEALNUMBER TYPE OPEN FEETR-6110 G 0.9 5.5
R-6111 G 1.2 6.0
R-6112 G 1.3 6.0
R-6113 G 0.9 6.3
R-6114 G 1.8 7.0
R-6115 G 1.6 7.1
R-6116 G 1.9 7.6
R-6117 G 2.4 8.5
R-6118 G 2.6 9.9
R-6130 G 0.8 5.4
R-6131 G 1.0 5.6
R-6132 G 1.3 6.3
R-6133 G 1.3 6.5
R-6134 G 1.5 6.9
R-6136 G 2.5 8.3
R-6137 G 2.7 8.8
R-6140Manhole Frame, Lid with Type F Lock
Heavy Duty
F Note: When specifying/ordering grates, refer to “Choosing the proper inlet grate” on pages 117-118.For a complete listing of FREE OPEN AREAS and WEIR PERIMETERS of all NEENAH grates, refer to pages 306-311.
R-6145Manhole Frame, Lid with Type F Lock
Light Duty
10
282
11
AC
CE
SS
&H
AT
CH
CO
VE
RS
FO U N D RYN E E N A H
R-6142Manhole Frame, Lid
Heavy Duty
R-6143Manhole Frame, Lid
Heavy Duty
R-6144Manhole Frame, Lid
Light Duty
R-6149Manhole Frame, Lid
Heavy Duty
283
11
AC
CE
SS
&H
AT
CH
CO
VE
RS
FO U N D RYN E E N A H
R-6146Manhole Frame, Lid
Heavy Duty
R-6147Manhole Frame, Self-Sealing Lid
Heavy Duty
R-6148Manhole Frame, Vented Lid
Heavy Duty
10
284
11
AC
CE
SS
&H
AT
CH
CO
VE
RS
FO U N D RYN E E N A H
R-6151Manhole Frame, Lid
Light Duty
R-6310 SeriesManhole Frame, Vented Lid
Light Duty
Suitable for garages, bottling plants, laundries, service stations and industrial buildingapplications of all kinds.
Dimensions in inchesCatalog No. A B C E F H # of VentsR-6310-A 9 1 8 12 2 1/2 1/2 6R-6310-B 13 3/4 11 3/4 17 2 1/2 3/4 6R-6310-C 16 3/4 15 20 1/4 2 1/2 1 12R-6310-D 18 1/2 16 1/2 22 1/2 4 3/4 8R-6310-E 20 1/2 5/8 18 24 2 1/2 1/2 24R-6310-F 24 3/4 22 30 3 1/2 3/4 18R-6310-G1 26 5/8 3/4 25 31 4 5/8 20R-6310-H 31 3/4 3/4 30 36 1/2 6 1 24R-6310-H1 31 3/4 3/4 30 36 1/2 3 1/2 1 24
Illustrating R-6310-G1
R-6320 SeriesManhole Frame, Lid for Concrete, Asphalt or Terrazzo Fill
Light Duty
Furnished standard with steel lift handle. Also available with top surface of frame and lidmachine finished. Bronze lift handle available.
Dimensions in inchesCatalog No. A B C E FR-6320-A 9 1 8 12 2 1/2R-6320-B 13 3/4 11 3/4 17 2 1/2R-6320-D 18 1/2 16 1/2 22 1/2 4R-6320-E 20 1/2 5/8 18 24 2 1/2R-6320-F 21 1/2 1 20 27 4R-6320-G 24 3/4 22 30 3 1/2R-6320-H 26 5/8 3/4 25 31 4
R-6350 to R-6352 SeriesManhole Frame, Solid/Vented/Grated Cover
Light Duty
These covers are used extensively by plumbers and contractors for inside use. Note thatcovers are adaptable for use with clay tile catch basin or sub-construction, frames to fitinside of and flush with top of bell.
Dimensions in inchesCatalog No. Catalog No. Catalog No. PipeSolid Vented Grated A B C E F SizeR-6350-A R-6352-A 13 1/2 12 15 2 1/2 12R-6350-B R-6351-B R-6352-B 16 3/4 15 20 1/4 2 1/2 15R-6350-C 18 1/4 17 21 3 18R-6350-D R-6351-D R-6352-D 19 1/2 18 21 3 18R-6350-E R-6351-E R-6352-E 21 1/2 20 23 3 20R-6350-G R-6351-G R-6352-G 25 1/2 24 27 3 24
Illustrating R-6350-GIllustrating R-6352-EWEIR
SQ. PERIMETERCATALOG GRATE FT. LINEALNUMBER TYPE OPEN FEETR-6352-A G 0.4 3.4
R-6352-B G 0.8 4.2
R-6352-D G 0.7 4.9
R-6352-E G 0.8 5.5
R-6352-G G 1.3 6.5
F Note: When specifying/ordering grates, refer to “Choosing the proper inlet grate” on pages 117-118.For a complete listing of FREE OPEN AREAS and WEIR PERIMETERS of all NEENAH grates, refer to pages 306-311.
285
11
AC
CE
SS
&H
AT
CH
CO
VE
RS
FO U N D RYN E E N A H
10
286
11
AC
CE
SS
&H
AT
CH
CO
VE
RS
FO U N D RYN E E N A H
R-6400 SeriesManhole Frame, Solid or Grated Cover
Heavy Duty
Suitable for heavy traffic. May be used for handholes, equipment covers, etc. on bridge orhighway construction.
Dimensions in inchesCatalog No. Lid Catalog No. GrateSolid Lid Type Open Grate Type A B C E F G HR-6400-AS C R-6400-AO G 11 3/4 1 10 17 1/4 4 1 1/2 1R-6400-BS B R-6400-BO G 19 3/4 1 18 25 1/4 4 1 3/4R-6400-CS C R-6400-CO G 27 1 1/4 23 1/2 33 1/2 4 1 1/2 1R-6400-DS C R-6400-DO G 29 1 3/4 27 35 6 1 1
Illustrating R-6400-BO
C Lid
B Lid
Illustrating R-6400-DS
WEIRSQ. PERIMETER
CATALOG GRATE FT. LINEALNUMBER TYPE OPEN FEETR-6400-AO G 0.3 3.1
R-6400-BO G 0.8 5.0
R-6400-CO G 1.8 7.0
R-6400-DO G 1.2 7.6
R-6450 SeriesRound Frame, Solid or Grated Cover
Light Duty
For bell end of vitrified clay pipe.
CAUTION: Pipe bell sizes from different manufacturers frequently vary. Check the castingdimensions with the table below to be sure the casting will fit the pipe you are using.
Dimensions in inchesCatalog No. Catalog No. FrameSolid Lid Open Grate Pipe Size A B C D2 E F TypeR-6450-AL R-6450-AG 8 9 1 8 10 1/8 12 2 1/2 YR-6450-BL R-6450-BG 10 12 1 11 13 14 3/4 2 1/2 YR-6450-CL R-6450-CG 12 13 3/4 11 3/4 14 1/2 17 2 1/2 WR-6450-DL R-6450-DG 15 16 3/4 15 18 20 1/4 2 1/2 YR-6450-EL R-6450-EG 18 20 1/2 5/8 18 22 1/2 24 2 1/2 WR-6450-FL R-6450-FG 20 21 1/2 1 20 24 1/2 27 4 WR-6450-GL R-6450-GG 21 24 3/4 22 25 1/2 30 3 1/2 YR-6450-HL R-6450-HG 24 26 5/8 3/4 25 28 1/2 31 4 YR-6450-JL R-6450-JG 27 31 3/4 3/4 30 35 1/4 36 1/2 6 YR-6450-KL R-6450-KG 30 33 1/2 3/4 32 34 1/2 37 4 Y
WEIRSQ. PERIMETER
CATALOG GRATE FT. LINEALNUMBER TYPE OPEN FEETR-6450-AG G 0.2 2.4
R-6450-BG G 0.2 3.1
R-6450-CG G 0.4 3.4
R-6450-DG G 0.5 4.2
R-6450-EG G 0.7 5.4
R-6450-FG G 0.1 5.6
R-6450-GG G 1.3 6.3
R-6450-HG G 1.3 6.9
R-6450-JG G 1.9 8.3
R-6450-KG G 2.7 8.8
F Note: When specifying/ordering grates, refer to “Choosing the proper inlet grate” on pages 117-118.For a complete listing of FREE OPEN AREAS and WEIR PERIMETERS of all NEENAH grates, refer to pages 306-311.
R-6460 SeriesPressure-Type Round Manhole Frame, Bolted LidWater-, Gas-, and Steamtight
Heavy Duty
Suitable for low pressure application up to 20 p.s.i.
NOTE: Bolting pads reduce effective clear opening (dimension C) by 2" to 3". If "C"dimension is critical, select larger size.
Units are shipped assembled with gasket glued to frame.
Dimensions in inchesCatalog No. A B C E F No. of BoltsR-6460-A 21 1 1/2 18 27 1/2 5 fourR-6460-B 23 1 3/4 21 30 4 fourR-6460-C 27 1 1/4 23 1/2 33 1/2 4 fourR-6460-D 29 1 3/4 27 35 6 sixR-6460-G1 38 1 1/2 36 49 4 1/2 six
R-6461 to R-6462 SeriesPressure-Type Round Manhole Frame, Bolted LidWater-, Gas-, and Steamtight
Heavy Duty
Suitable for low pressure application up to 20 p.s.i.
Frames in this series are reversible and can beinstalled with the flange at top for slabconstruction, or with flange at base for use withbuilt-up manhole.
Slab construction type manhole covers are sizedto fit in the opening of corrugated metal pipe from12" to 48" in diameter.
Furnished standard with concealed, watertightpickhole. Lids sealed with gasket and fastenedwith stainless steel bolts.
Units are shipped assembled with gasket glued to lid.
Dimensions in inchesCatalog No. Catalog No. No. ofSlab Type Built-Up Type A B C E F BoltsR-6461-AH R-6462-AH 10 1/4 1 1/2 6 1/2 14 1/2 4 fourR-6461-BH R-6462-BH 13 1/4 1 1/2 9 1/2 17 1/2 4 fourR-6461-CH R-6462-CH 16 1/4 1 1/2 12 1/2 20 1/2 4 fourR-6461-DH R-6462-DH 18 1/4 1 1/2 14 1/2 22 1/2 4 fourR-6461-EH R-6462-EH 22 1/4 1 1/2 18 1/2 26 1/2 4 fourR-6461-FH R-6462-FH 25 1/4 1 1/2 21 1/2 29 1/2 4 fourR-6461-GH R-6462-GH 28 1/4 1 1/2 24 1/2 32 1/2 4 sixR-6461-HH R-6462-HH 31 1/4 1 1/2 30 1/2 38 1/2 4 sixR-6461-JH R-6462-JH 40 1 1/2 36 1/2 44 1/2 4 sixR-6461-KH R-6462-KH 46 1/8 1 1/2 42 1/2 50 1/2 4 six
Illustrating R-6461-EH Slab Type
Illustrating R-6462-EH Built-up Type
287
11
AC
CE
SS
&H
AT
CH
CO
VE
RS
FO U N D RYN E E N A H
R-6476Pressure Frame, Lid
Heavy Duty
Suitable for low pressure application up to 20 p.s.i.
Used for pressure access covers in treatment plants or reservoirs. Cover is bolted with 28exposed stainless steel hex head cap screws as specified. Note 2" water seal flange.
Units are shipped assembled with gasket glued to frame.
10
288
11
AC
CE
SS
&H
AT
CH
CO
VE
RS
FO U N D RYN E E N A H
R-6464 SeriesPressure-Type Round Manhole Frame, Bolted LidWater-, Gas-, and Steamtight
Heavy Duty
Suitable for low pressure application up to 20 p.s.i.
Seal type frames have flange at base as well as top. Furnished with T-gasket and stainlesssteel cap screws.
Units are shipped assembled with gasket glued to lid.
NOTE: Bolting pads reduce effective clear opening (dimension C) by 2" to 3". If "C"dimension is critical, select larger size.
Dimensions in inchesNo. of
Catalog No. A B C E EE F BoltsR-6464-D 25 1/4 1 22 26 1/2 25 6 fourR-6464-F 26 1 24 27 3/4 27 8 fourR-6464-G 29 1 3/4 27 31 31 6 six
Concealedpickhole detail
R-6470 SeriesLow Pressure Water-Resistant Frame, Solid Lid, Lock Bar and Gasket
Light Duty
Units are shipped assembled with gasket glued to frame.
Dimensions in inchesBolt Circle
Catalog No. A C E F DiameterR-6470-A 21 18 25 5 23 1/2R-6470-B 27 24 31 6 29 1/2
289
11
AC
CE
SS
&H
AT
CH
CO
VE
RS
FO U N D RYN E E N A H
R-6660 to R-6661 SeriesManhole Frame, Lid
Light Duty
Frames and lids in this series can be furnished standard without hinges or with Type Thinges as indicated below. Also, castings can be furnished with Type R butt hinges instainless steel. (When butt hinges are required, specify the non-hinged unit with the hingeof your choice.) If fastening device is necessary, see page 16 for various types availableon all units of this series.
These castings are also available using a gasketed and bolted lid. See R-6665-0-1 Series.
Specify number of lids required where option is shown. Hold-open safety bars arefurnished standard on most T-hinged units.
The specific location and number of hinges, handles and pickholes on these unitsmay vary depending on the size and shape of the lids, and may not be exactly asillustrated. If the location and number of hinges, handles or pickholes is critical onyour particular project, please specify requirements.
Dimensions in inchesCatalog No. Catalog No. No. ofNot Hinged T-Hinged A B C E F Lids
SquareR-6660-AP - 12 x 12 3/4 10 x 10 18 1/2 x 18 1/2 4 1R-6660-CP - 13 x 13 5/8 12 x 12 15 x 15 3 1R-6660-DP R-6660-DH 15 x 15 3/4 13 5/16 x 13 5/16 19 x 19 4 1R-6660-FP R-6660-FH 18 1/2 x 18 1/2 3/4 17 x 17 23 x 23 3 1R-6660-GP R-6660-GH 19 3/4 x 19 3/4 3/4 18 1/2 x 18 1/2 24 x 24 4 1R-6660-HP R-6660-HH 21 1/2 x 21 1/2 3/4 19 1/2 x 19 1/2 24 1/2 x 24 1/2 4 1R-6660-JP R-6660-JH 23 1/2 x 23 1/2 3/4 21 7/8 x 21 7/8 28 1/2 x 28 1/2 4 1R-6660-KP R-6660-KH 25 1/2 x 25 1/2 3/4 24 x 24 30 x 30 4 1R-6660-MP R-6660-MH 30 x 30 3/4 28 x 28 34 x 34 4 1R-6660-NP R-6660-NH 32 x 32 3/4 30 x 30 36 x 36 4 1R-6660-PP R-6660-PH 38 x 38 3/4 36 x 36 46 x 46 4 1R-6660-RP R-6660-RH 44 x 44 1 42 x 42 49 x 49 4 2R-6660-TP * R-6660-TH * 56 3/8 x 56 3/8 1 1/2 54 x 54 64 x 64 4 1/2 2
RectangularR-6661-A1P R-6661-A1H 14 x 19 3/4 12 x 17 18 1/4 x 23 3/8 4 1R-6661-BP - 14 x 26 3/4 12 x 24 18 x 30 4 1R-6661-CP R-6661-CH 18 x 32 3/4 16 x 30 20 x 34 4 1R-6661-DP R-6661-DH 19 5/8 x 49 5/8 3/4 18 x 48 22 x 52 4 2R-6661-EP R-6661-EH 21 1/2 x 24 1/2 3/4 20 x 23 26 x 29 6 1R-6661-F2P * - 21 1/2 x 65 5/8 3/4 20 x 64 28 x 72 4 2R-6661-F3P * - 24 1/2 x 55 1/2 3/4 22 x 54 30 x 62 4 2R-6661-FP R-6661-FH 22 x 32 3/4 20 x 30 26 x 36 5 1/4 1R-6661-HP R-6661-HH 26 x 32 3/4 24 x 30 30 x 36 4 1R-6661-JP R-6661-JH 26 x 38 3/4 24 x 36 30 x 42 4 1 or 2R-6661-KP R-6661-KH 26 x 44 3/4 24 x 42 30 x 48 4 1R-6661-LP R-6661-LH 25 1/2 x 49 1/2 3/4 24 x 48 30 x 54 4 2R-6661-NP R-6661-NH 25 1/2 x 61 1/2 3/4 24 x 60 31 x 67 6 2R-6661-PP R-6661-PH 28 3/4 x 31 3/4 3/4 27 x 30 34 x 37 4 1R-6661-TP R-6661-TH 31 5/8 x 37 5/8 3/4 30 x 36 37 x 43 4 1R-6661-UP R-6661-UH 32 x 43 3/4 3/4 30 x 42 37 x 47 1/2 4 1 or 2R-6661-V1P R-6661-V1H 31 5/8 x 73 3/4 30 x 72 36 x 78 4 2R-6661-VP R-6661-VH 32 x 50 3/4 30 x 48 36 x 54 4 1 or 2R-6661-YP * R-6661-YH * 44 x 110 3/4 42 x 108 52 x 118 4 3* Frame in sections, bolted at corners.
Illustrating R-6660-NH
Illustrating R-6661-LH
10
290
11
AC
CE
SS
&H
AT
CH
CO
VE
RS
FO U N D RYN E E N A H
R-6662 to R-6663 SeriesManhole Frame, Lid
Heavy Duty
Frames and lids in this series can be furnished standard without hinges or with Type Thinges as indicated below. Also, castings can be furnished with Type R butt hinges instainless steel. (When butt hinges are required, specify the non-hinged unit with the hingeof your choice.) If fastening device is necessary, see page 16 for various types availableon all units of this series.
These castings are also available using a gasketed and bolted lid. See R-6665-2-3 Series.For similar castings with grates, see R-6672-3 Series.
For complete information on our Spring Assist hatch products, please refer to theR-3498 Series.
Hold-open safety bars are furnished standard on most T-hinged units.
The specific location and number of hinges, handles and pickholes on these unitsmay vary depending on the size and shape of the lids, and may not be exactly asillustrated. If the location and number of hinges, handles or pickholes is critical onyour particular project, please specify requirements.
Dimensions in inchesCatalog No. Catalog No. Catalog No. No. of FrameNot Hinged T-Hinged Spring Assist A B C E F Lids Type
SquareR-6662-AP - 12 1/4 x 12 1/4 1 11 1/2 x 11 1/2 15 x 15 6 1 YR-6662-BP ** - 13 3/4 x 13 3/4 1 1/2 12 x 12 18 x 18 4 1 WR-6662-CP ** R-6662-CH 18 x 18 1 1/2 16 x 16 22 x 22 4 1 WR-6662-EP ** R-6662-EH 20 x 20 1 1/2 18 x 18 24 x 24 4 1 WR-6662-GP ** R-6662-GH 21 1/2 x 21 1/2 1 1/2 20 x 20 26 x 26 4 1 WR-6662-HP ** R-6662-HH 23 1/2 x 23 1/2 1 1/2 22 x 22 28 x 28 4 1 WR-6662-JP - 25 1/4 x 25 1/4 1 3/4 23 x 23 31 1/2 x 31 1/2 4 1 YR-6662-KP ** R-6662-KH R-6662-KS 25 3/4 x 25 3/4 1 1/2 24 x 24 30 x 30 4 1 WR-6662-LP - 27 x 27 2 25 x 25 33 1/2 x 33 1/2 4 1 YR-6662-MP ** R-6662-MH 27 1/2 x 27 1/2 1 1/2 26 x 26 32 x 32 4 1 WR-6662-NP ** R-6662-NH 29 1/2 x 29 1/2 1 1/2 28 x 28 34 x 34 4 1 WR-6662-PP R-6662-PH R-6662-PS 31 1/2 x 31 1/2 1 1/2 30 x 30 36 x 36 4 1 WR-6662-RP R-6662-RH R-6662-RS 37 x 37 1 1/2 36 x 36 42 x 42 4 2 WR-6662-TP + R-6662-TH R-6662-TS 50 x 50 1 1/2 48 x 48 56 x 56 4 2 Y
RectangularR-6663-AP ** R-6663-AH 14 x 20 1 1/2 12 x 18 18 x 24 4 1 WR-6663-BP ** R-6663-BH 13 1/2 x 25 1/2 1 1/2 12 x 24 18 x 30 4 1 WR-6663-CP R-6663-CH 19 1/2 x 25 1/2 1 1/2 18 x 24 24 x 30 4 1 WR-6663-DP ** R-6663-DH 19 1/2 x 31 1/2 1 1/2 18 x 30 24 x 36 4 1 WR-6663-E1P R-6663-E1H 20 x 44 1 1/2 18 x 42 24 x 48 4 1 YR-6663-EP ** R-6663-EH 19 3/4 x 37 3/4 1 1/2 18 x 36 24 x 42 4 1 WR-6663-FP - 22 x 32 1 1/4 20 x 30 26 x 36 4 1 YR-6663-HP R-6663-HH 26 x 32 1 1/2 24 x 30 30 x 36 4 1 YR-6663-JP R-6663-JH R-6663-JS 25 1/2 x 37 1/2 1 1/2 24 x 36 30 x 42 4 1 WR-6663-KP ** R-6663-KH 25 3/4 x 49 3/4 1 1/2 24 x 48 30 x 54 4 2 WR-6663-MP ** R-6663-MH 31 3/4 x 37 3/4 1 1/2 30 x 36 30 x 42 4 2 WR-6663-NP ** R-6663-NH 31 1/2 x 49 1/2 1 1/2 30 x 48 36 x 54 4 2 WR-6663-O1P * R-6663-O1H * 38 x 50 1 1/2 36 x 48 44 1/2 x 56 1/2 4 2 YR-6663-OP R-6663-OH 35 3/4 x 59 7/8 1 3/8 34 x 58 40 x 64 6 2 YR-6663-PP * R-6663-PH * 44 x 62 1 3/8 42 x 60 50 1/2 x 68 1/2 4 2 W* Frame in sections bolted at corners.** Furnished with pickhole instead of G-handle.+ Available with centered 24" diameter removable center access lid.
Illustrating R-6662-CP
Illustrating R-6663-JS
291
11
AC
CE
SS
&H
AT
CH
CO
VE
RS
FO U N D RYN E E N A H
R-6665-0 to R-6665-1 SeriesManhole Frame, Bolted/Gasketed Lid
Light Duty
Square and rectangular sizes in this series furnished standard with countersunk stainlesssteel flat head cap screws, flat neoprene gasket, Type G lift handle and, when so indicated,Type R stainless steel butt hinge.
All units available in cast aluminum or bronze for spark proof application.
Units are shipped assembled with gasket glued to frame.
The specific location and number of hinges, handles and pickholes on these unitsmay vary depending on the size and shape of the lids, and may not be exactly asillustrated. If the location and number of hinges, handles or pickholes is critical onyour particular project, please specify requirements.
Dimensions in inchesCatalog No. Catalog No. No. ofNot Hinged Steel Butt Hinge A B C E F Bolts
SquareR-6665-0AP R-6665-0AH 12 x 12 3/4 10 x 10 18 1/2 x 18 1/2 4 4R-6665-0CP R-6665-0CH 13 x 13 5/8 12 x 12 15 x 15 3 4R-6665-0DP R-6665-0DH 15 x 15 3/4 13 x 13 19 x 19 4 4R-6665-0FP R-6665-0FH 18 1/2 x 18 1/2 3/4 17 x 17 23 x 23 3 4R-6665-0GP R-6665-0GH 19 3/4 x 19 3/4 3/4 17 1/2 x 17 1/2 24 x 24 4 8R-6665-0HP R-6665-0HH 21 1/2 x 21 1/2 3/4 18 1/2 x 18 1/2 24 1/2 x 24 1/2 4 8R-6665-0JP R-6665-0JH 23 1/2 x 23 1/2 3/4 20 7/8 x 20 7/8 28 1/2 x 28 1/2 4 8R-6665-0KP R-6665-0KH 25 1/2 x 25 1/2 3/4 23 x 23 30 x 30 4 8R-6665-0MP R-6665-0MH 30 x 30 3/4 27 x 27 34 x 34 4 8R-6665-0NP R-6665-0NH 32 x 32 3/4 29 x 29 36 x 36 4 8
RectangularR-6665-1A1P R-6665-1A1H 14 x 19 3/4 11 x 16 18 1/4 x 23 3/8 4 4R-6665-1BP R-6665-1BH 14 x 26 3/4 11 x 23 18 x 30 4 6R-6665-1CP R-6665-1CH 18 x 32 3/4 15 x 29 20 x 34 4 6R-6665-1DP R-6665-1DH 19 5/8 x 49 5/8 3/4 17 x 47 22 x 52 4 12R-6665-1EP R-6665-1EH 21 1/2 x 24 1/2 3/4 19 x 22 26 x 29 6 8R-6665-1F3P * R-6665-1F3H * 24 1/2 x 55 1/2 3/4 19 x 29 30 x 62 4 12R-6665-1FP R-6665-1FH 22 x 32 3/4 22 x 54 26 x 36 5 1/4 10R-6665-1HP R-6665-1HH 26 x 32 3/4 23 x 29 30 x 36 4 8R-6665-1JP R-6665-1JH 26 x 38 3/4 23 x 35 30 x 42 4 10R-6665-1KP R-6665-1KH 26 x 44 3/4 22 x 40 30 x 48 4 10R-6665-1LP R-6665-1LH 25 1/2 x 49 1/2 3/4 23 x 47 30 x 54 4 12R-6665-1NP R-6665-1NH 25 1/2 x 61 1/2 3/4 23 x 59 31 x 67 6 12R-6665-1PP R-6665-1PH 29 x 32 3/4 26 x 29 34 x 37 4 8R-6665-1TP R-6665-1TH 31 5/8 x 37 5/8 3/4 29 x 35 37 x 43 4 12R-6665-1UP R-6665-1UH 32 x 43 3/4 3/4 29 x 41 37 x 47 1/2 4 12R-6665-1V1P R-6665-1V1H 31 5/8 x 73 3/4 29 x 47 36 x 78 4 18R-6665-1VP R-6665-1VH 32 x 50 3/4 29 x 71 36 x 54 4 14* Frame in sections bolted at corners.
Illustrating R-6665-0NP
Illustrating R-6665-1KH
10
292
11
AC
CE
SS
&H
AT
CH
CO
VE
RS
FO U N D RYN E E N A H
R-6665-2 to R-6665-3 SeriesManhole Frame, Bolted/Gasketed Lid
Heavy Duty
Square and rectangular sizes in this series furnished standard with countersunk stainlesssteel flat head cap screws, flat neoprene gasket, Type G lift handle and, when so indicated,Type R stainless steel butt hinge.
NOTE: Some heavier lids may have bottom ribs that extend below the base of the frame.If this would cause a problem in your installation, advise when ordering.
Units are shipped assembled with gasket glued to frame.
The specific location and number of hinges, handles and pickholes on these unitsmay vary depending on the size and shape of the lids, and may not be exactly asillustrated. If the location and number of hinges, handles or pickholes is critical onyour particular project, please specify requirements.
Dimensions in inchesCatalog No. Catalog No. No. of FrameNot Hinged Steel Butt Hinge A B C E F Bolts Type
SquareR-6665-2AP R-6665-2AH 12 1/4 x 12 1/4 1 11 1/2 x 11 1/2 15 x 15 6 4 YR-6665-2BP R-6665-2BH 13 3/4 x 13 3/4 1 1/2 12 x 12 18 x 18 4 4 WR-6665-2CP R-6665-2CH 18 x 18 1 1/2 16 x 16 22 x 22 4 4 WR-6665-2EP R-6665-2EH 20 x 20 1 1/2 18 x 18 24 x 24 4 4 WR-6665-2GP R-6665-2GH 21 1/2 x 21 1/2 1 1/2 20 x 20 26 x 26 4 4 WR-6665-2HP R-6665-2HH 23 1/2 x 23 1/2 1 1/2 21 x 21 28 x 28 4 8 WR-6665-2JP R-6665-2JH 25 1/4 x 25 1/4 1 3/4 22 x 22 31 1/2 x 31 1/2 4 8 YR-6665-2KP R-6665-2KH 25 3/4 x 25 3/4 1 1/2 23 x 23 30 x 30 4 8 WR-6665-2LP R-6665-2LH 27 x 27 2 24 x 24 33 1/2 x 33 1/2 4 8 YR-6665-2MP R-6665-2MH 27 1/2 x 27 1/2 1 1/2 25 x 25 32 x 32 4 8 WR-6665-2NP R-6665-2NH 29 1/2 x 29 1/2 1 1/2 27 x 27 34 x 34 4 8 WR-6665-2OP R-6665-2OH 30 x 30 1 3/4 27 x 27 34 x 34 4 8 YR-6665-2PP R-6665-2PH 31 1/2 x 31 1/2 1 1/2 29 x 29 37 x 37 4 8 YR-6665-2RHR-6665-2RPR-6665-2TP R-6665-2TH 50 x 50 1 1/2 47 x 47 56 x 56 4 16 Y
RectangularR-6665-3AP R-6665-3AH 14 x 20 1 1/2 11 x 17 18 x 24 4 6 WR-6665-3BP R-6665-3BH 13 1/2 x 25 1/2 1 1/2 11 x 23 18 x 30 4 6 WR-6665-3CP R-6665-3CH 19 1/2 x 25 1/2 1 1/2 17 x 23 24 x 30 4 8 WR-6665-3DP R-6665-3DH 19 1/2 x 31 1/2 1 1/2 17 x 29 24 x 36 4 8 WR-6665-3E1P R-6665-3E1H 20 x 44 1 1/2 17 x 41 24 x 48 4 10 YR-6665-3EP R-6665-3EH 19 3/4 x 37 3/4 1 1/2 17 x 35 24 x 42 4 10 WR-6665-3FP R-6665-3FH 22 x 32 1 1/4 19 x 29 26 x 36 4 8 YR-6665-3HP R-6665-3HH 26 x 32 1 1/2 23 x 29 30 x 36 4 8 YR-6665-3JP R-6665-3JH 25 1/2 x 37 1/2 1 1/2 23 x 35 30 x 42 4 10 WR-6665-3KP R-6665-3KH 25 3/4 x 49 3/4 1 1/2 23 x 47 30 x 54 4 12 WR-6665-3NP R-6665-3NH 31 1/2 x 49 1/2 1 1/2 29 x 47 36 x 54 4 16 WR-6665-3O1P R-6665-3O1H 38 x 50 1 1/2 35 x 47 44 1/2 x 56 1/2 4 14 WR-6665-3OP * R-6665-3OH * 36 x 60 1 3/8 33 x 57 40 x 64 6 16 Y* Frame in sections bolted a corners.
Illustrating R-6665-2LP
Illustrating R-6665-3JH
293
11
AC
CE
SS
&H
AT
CH
CO
VE
RS
FO U N D RYN E E N A H
R-6668 to R-6669 SeriesPressure-Type Manhole Frame, Solid Lid
Heavy Duty
Suitable for low pressureapplication up to 20 p.s.i.
Manhole covers of this series arefor use on built-up manholes or slabconstruction in either regular or sealtype design. Suitable for use onpressure manholes or as water-resistant electrical junction boxeson bridges, etc. Lids are bolted toframes with countersunk stainless steel hex head cap screws and sealed with neoprenegaskets. Concealed pickholes are included for complete water-tight application.
Units are shipped assembled with gasket glued to frame.
Dimensions in inchesCatalog No. Catalog No. No. ofType L Type P A AA B C E F Bolts
SquareR-6668-L1 R-6668-P1 15 3/4 x 15 3/4 17 1/2 x 17 1/2 1 1/2 12 x 12 18 x 18 8 4R-6668-L3 21 3/4 x 21 3/4 23 1/2 x 23 1/2 1 1/2 18 x 18 24 x 24 8 4R-6668-L6 R-6668-P6 27 5/8 x 27 5/8 29 1/2 x 29 1/2 1 1/2 24 x 24 30 x 30 8 8
RectangularR-6669-L1 15 3/4 x 21 3/4 17 1/2 x 23 1/2 1 1/2 12 x 18 18 x 24 8 6R-6669-L10 R-6669-P10 33 3/4 x 51 3/4 35 1/2 x 53 1/2 1 1/2 30 x 48 36 x 54 8 16R-6669-L3 R-6669-P3 21 3/4 x 27 3/4 23 1/2 x 29 1/2 1 1/2 18 x 24 24 x 30 8 8
Built-up or Slab Seal Type
Illustrating Type L
10
294
11
AC
CE
SS
&H
AT
CH
CO
VE
RS
FO U N D RYN E E N A H
R-6672 to R-6673 SeriesFrame, Grate
Heavy Duty
For similar castings with lids, see R-6662-3 Series.
Dimensions in inchesFrame
Catalog No. A B C E F G H TypeSquare
R-6672-1 11 7/8 x 11 7/8 1 1/8 10 3/4 x 10 3/4 16 x 16 3 1/2 1 1/2 x 1 1/2 5/8 YR-6672-A 12 1/4 x 12 1/4 1 11 1/2 x 11 1/2 15 x 15 6 1 1/8 x 10 1 YR-6672-B ** 13 3/4 x 13 3/4 1 1/2 12 x 12 18 x 18 4 1 x 5 1/2 1 WR-6672-C 18 x 18 1 1/2 16 x 16 24 x 24 4 1/2 1 x 4 1/4 1 YR-6672-D 21 1/2 x 21 1/2 1 1/2 20 x 20 26 x 26 4 1 3/8 x 3 5/8 1 WR-6672-E 23 1/2 x 23 1/2 1 1/2 22 x 22 28 x 28 4 1 1/2 x 6 3/8 1 WR-6672-F ** 25 3/4 x 25 3/4 1 1/2 24 x 24 30 x 30 4 1/2 x 4 1/2 1 WR-6672-G 27 x 27 2 25 x 25 33 1/2 x 33 1/2 4 1 1/2 x 5 1 YR-6672-H 27 1/2 x 27 1/2 1 1/2 26 x 26 32 x 32 4 1 x 5 1 WR-6672-J 30 x 30 1 3/4 28 x 28 34 x 34 4 1 1/2 x 6 1 1/4 YR-6672-K ** 31 3/4 x 31 3/4 1 1/2 30 x 30 37 x 37 4 1 x 6 3/8 1 1/8 WR-6672-M * 37 x 37 1 1/2 36 x 36 42 x 42 4 1 3/4 x 3 1/2 1 1/2 WR-6672-Q *+ 56 1/2 x 56 1/2 1 1/2 54 x 54 64 x 64 4 1/2 1 1/8 x 12 3/4 1 1/4 Y
RectangularR-6673-A 14 x 20 1 1/2 12 x 18 18 x 24 4 3/4 x 5 1/2 1 WR-6673-B 13 1/2 x 25 1/2 1 1/2 12 x 24 18 x 30 4 1 x 4 1/2 1 WR-6673-C 19 1/2 x 25 1/2 1 1/2 18 x 24 24 x 30 4 1 x 6 7/8 1 WR-6673-D 19 3/4 x 31 3/4 1 1/2 18 x 30 24 x 36 4 2 x 5 1 WR-6673-E 19 3/4 x 37 3/4 1 1/2 18 x 36 30 x 42 4 2 x 5 1 WR-6673-J 25 1/2 x 31 1/2 1 1/2 24 x 30 30 x 36 4 1 3/8 x 5 1 WR-6673-K 25 3/4 x 37 3/4 1 1/2 24 x 36 30 x 42 4 1 3/8 x 5 1 WR-6673-L * 25 3/4 x 49 3/4 1 1/2 24 x 48 30 x 54 4 1 5/16 x 6 13/16 1 WR-6673-N * 31 3/4 x 37 3/4 1 1/2 30 x 36 36 x 42 4 1 3/8 x 4 5/8 1 WR-6673-O * 31 1/2 x 49 1/2 1 1/2 30 x 48 36 x 54 4 1 1/2 x 4 3/4 1 WR-6673-Q1 * 38 x 20 1 1/2 36 x 48 44 1/2 x 56 1/2 4 1 1/6 x 7 5/8 1 W* Grate in two pieces.** Also available with Type Q grate.+ Frame in sections bolted at corners.
WEIRSQ. PERIMETER
CATALOG GRATE FT. LINEALNUMBER TYPE OPEN FEETR-6672-1 H 0.4 3.9
R-6672-A A or C 0.8 4.1
R-6672-B A or C 0.5 4.6
R-6672-B Q 0.2 4.6
R-6672-C A or C 0.8 6.0
R-6672-D A or C 1.1 7.3
R-6672-E A or C 1.8 7.9
R-6672-F A or C 2.7 8.6
R-6672-F Q 1.0 8.6
R-6672-G A or C 2.2 9.0
R-6672-H A or C 2.1 9.2
R-6672-J A or C 2.4 10.0
R-6672-K A or C 2.5 10.6
R-6672-K Q 2.1 10.6
R-6672-M A or C 3.0 12.3
R-6672-Q A or C 9.3 18.8
R-6673-A A 0.6 5.7
R-6673-B A 0.9 6.5
R-6673-C A 1.2 7.5
R-6673-D A 2.1 8.6
R-6673-E A 2.5 9.6
R-6673-J A 2.6 9.5
R-6673-K A 2.9 10.6
R-6673-L A 3.7 12.6
R-6673-N A 3.3 11.6
R-6673-O A 4.9 13.5
R-6673-Q1 A 5.0 14.7
R-6679 SeriesElectrical Handhole Frame, Lid
Dimensions in inchesCatalog No. A B C D E F DutyR-6679-A1 23 1/2 1 1/4 22 23 1/2 31 1/2 4 LightR-6679-B1 23 1/2 1 1/4 22 23 1/2 31 1/2 4 Heavy
Illustrating R-6679-B1
F Note: When specifying/ordering grates, refer to “Choosing the proper inlet grate” on pages 117-118.For a complete listing of FREE OPEN AREAS and WEIR PERIMETERS of all NEENAH grates, refer to pages 306-311.
295
11
AC
CE
SS
&H
AT
CH
CO
VE
RS
FO U N D RYN E E N A H
R-6680-AManhole Frame, Solid Lid
Heavy Duty
R-6681 to R-6685 SeriesSquare Pull Box Frame, Lid
Light Duty
Light weight design for pull boxes, junction or splice boxes, in areas not subject to traffic.Ideal for street lighting or traffic marker installations.
Dimensions in inchesFrame
Catalog No. A B C E F StyleSquare
R-6681-2 17 5/8 x 17 5/8 1/2 16 7/8 x 16 7/8 22 1/8 x 22 1/8 3 1R-6683-1 18 x 18 1 17 3/8 x 17 3/8 22 x 22 3 1R-6683-2 23 3/4 x 23 3/4 15/16 21 7/8 x 21 7/8 30 x 30 3 1
RectangularR-6684-2 10 3/4 x 18 3/4 1/2 10 x 18 16 x 24 3 1R-6685-1 17 7/8 x 24 1/2 17 x 22 1/2 24 1/2 x 30 3 2R-6685-5 24 x 36 1 23 x 34 3/4 29 x 41 3 1/8 2
Illustrating R-6683-1
R-6685 SeriesManhole Frame, Solid Lid with Inner Trough
Light Duty
Inner trough catches surface seepage which is drained off through line from tapped hole.Standard tap size is 3/4".
Dimensions in inchesCatalog No. A B C E FR-6685-C 23 1/2 x 23 1/2 3/4 18 x 18 28 1/2 x 28 1/2 4R-6685-D 30 x 30 3/4 24 x 24 34 x 34 4
Illustrating R-6685-D with lid removed
10
296
11
AC
CE
SS
&H
AT
CH
CO
VE
RS
FO U N D RYN E E N A H
R-6686 SeriesElectrical Pull Box Frame, Solid Lid
Heavy Duty
For security, cover can be bolted to frame.
Dimensions in inchesCatalog No. A B C E FR-6686 17 3/4 x 17 3/4 1 15 3/4 x 15 3/4 24 x 24 2R-6686-A 12 x 18 1 10 x 16 16 x 22 2
R-6686-DConduit Junction Well Frame, Solid Lid
Heavy Duty
R-6687 SeriesConduit Box Frame, Solid Lid
Light Duty
Lids can be furnished bolted at the corners.
Dimensions in inchesCatalog No. A B C E FR-6687-A 10 x 10 1 8 x 8 11 1/4 x 11 1/4 1 1/2R-6687-A1 12 x 18 1/2 10 x 16 13 1/2 x 19 1/2 1 1/4R-6687-B 13 7/8 x 15 7/8 1/2 12 x 14 15 x 17 1R-6687-C 14 x 28 1 12 x 26 15 1/4 x 19 1/4 1 1/2R-6687-D 15 7/8 x 15 7/8 1 1/8 14 1/2 x 14 1/2 17 1/8 x 17 1/8 1 3/4R-6687-E 20 3/8 x 20 3/8 1 18 3/4 x 18 3/4 21 1/4 x 21 1/4 1 1/2R-6687-F 23 x 29 1 1/2 20 x 26 24 x 30 2 1/8
297
11
AC
CE
SS
&H
AT
CH
CO
VE
RS
FO U N D RYN E E N A H
R-6688-2Handhole Frame, Lid
Light Duty
R-6689Electrical Pull Box Frame, Solid Lid
Heavy Duty
R-6690 SeriesSquare Manhole Frame, Top Lid, Inner Lid
Light Duty
For use as frost- or water-resistant assembly on pits, tanks or reservoirs where hydrostatichead is not involved. Inner lid provides protection against surface water inflow.
Either Type A or Type B furnished with anchor ring only when specified.
Dimensions in inchesCatalog No. Catalog No.Type A Type B A B C E FR-6690-BA R-6690-BB 24 x 24 3/4 19 x 19 28 1/2 x 28 1/2 7R-6690-FA R-6690-FB 32 x 32 3/4 27 x 27 37 x 37 8
Type A assembly with optional anchor ring
Type B assembly with lock bar
10
298
11
AC
CE
SS
&H
AT
CH
CO
VE
RS
FO U N D RYN E E N A H
R-7500 SeriesCast Iron Stop Plank Grooves
Sewage Disposal Castings
Groove supplied in standard three-foot maximum lengths, with slot dimensions as shown intable. Fractional sections may be obtained to give any overall length required.
Specify when ordering - send details as required:
- Catalog number
- Groove Type
- "Y" and "Z" dimensions
- "A", "B" and "C" dimensions
Catalog No. Y ZR-7500-22 2 2R-7500-33 3 3R-7500-44 4 4R-7500-66 6 6R-7500-86 * 8 6* Not available in Type E.
Typical Channel
NOTE: Most "Y" and "Z" dimensionscan be furnished interchangeably andare not limited to dimensions opposite
each other.
Type A or C, Type E, Type L
299
11
AC
CE
SS
&H
AT
CH
CO
VE
RS
FO U N D RYN E E N A H
R-7501 SeriesGrooves and Stop Plates
Grooves furnished in cast iron, aluminum, and as indicated, extruded aluminum and fibrereinforced polyester. Plates are available in plain steel, galvanized steel, fabricatedaluminum or fibre reinforced polyester.
Specify when ordering:
- Catalog Number
- Type and material of groove required
- Material of plate required
- Plate requirements - fabricated or slot type handles
- Number of assemblies required, or groove only
- Dimensions and drawings as required
Dimensions in inchesCatalog No. A * B * Y T
Square Type VR-7501-AV ** 1/4 1/8R-7501-BV 3/8 1/4R-7501-CV 1/2 3/8R-7501-DV 5/8 1/2R-7501-EV 3/4 5/8R-7501-FV 7/8 3/4* Any size requested** Extruded aluminum only
Dimensions in inchesCatalog No. A R Y T
Round Type W - Aluminum Only *R-7501-CW 24 12 1/2 3/8R-7501-DW 30 15 1/2 3/8R-7501-EW 36 18 5/8 1/2R-7501-FW 48 24 5/8 1/2* Specify dimension "B"
Aluminum Extruded Grooves
Fibre ReinforcedPolyester Groove
Rectangular, cipolletti, or V-notch weirs arealso available in plain steel, galvanized steel,aluminum or fibre reinforced polyester. Send
complete dimensional information.
10
300
11
AC
CE
SS
&H
AT
CH
CO
VE
RS
FO U N D RYN E E N A H
R-7506 SeriesFloor Box Frames and Lids
Floor boxes placed in slab provide access to extension stems which operate gate valves,plug valves, or sluice gates at a lower level.
Furnished with removable lid that can be drilled and tapped for pipe extension. (specify ifrequired). Made in various lengths to fit slab thickness. (specify F dimension).
Dimensions in inchesCatalog No. A B C E F *R-7506-A 5 1/2 3/8 4 7 18 maxR-7506-B 6 1/2 5 8 24 maxR-7506-C 7 1/2 1/2 6 9 20 maxR-7506-D 9 1/2 1/2 8 12 17 maxR-7506-E 11 1/2 1/2 10 13 16 maxR-7506-F 13 1/2 1/2 12 15 24 max* Manufactured to dimension required. Specify slab thickness when ordering.
R-7512 SeriesCast Iron Pipe Screen
For maximum free drainage area with openings sized to prevent clogging.
Six 3/4" holes for anchor bolts.
Dimensions in inchesCatalog No. Height Length Openings Width for Pipe SizeR-7512-A1 13 18 1 16 10 inchR-7512-B1 13 18 1 18 12 inch
F Note: When specifying/ordering grates, refer to “Choosing the proper inlet grate” on pages 117-118.For a complete listing of FREE OPEN AREAS and WEIR PERIMETERS of all NEENAH grates, refer to pages 306-311.
301
11
AC
CE
SS
&H
AT
CH
CO
VE
RS
FO U N D RYN E E N A H
R-7514Valve Handhole Frame and Lid
Used as access covers to valves for steam-, air-, or waterlines in railway terminals, subwayor industrial installations. Lids furnished standard without lettering. Also available are lidsmarked "S", "A", "E" or "W". Standard units have lid chained to frame to prevent loss.
Note large slot in cover to aid in easy removal.
Anchor rods not furnished
R-7516Round Ballast Screen
Designed to fit R-2504 standard catch basin frame with grate fitting top recess of ballast screen.
Also compatible with R-1713 frames and lids.
Can be double or triple stacked as needed.
Used where positive drainage must be assured
R-7516-CRound Ballast Screen
Designed to fit in lid opening of R-5901-E slab type frame. Frame is designed to fit 24"corrugated metal pipe. When specified, top cover grate and frame can also be furnished.
Can be double or triple stacked as needed.
F Note: When specifying/ordering grates, refer to “Choosing the proper inlet grate” on pages 117-118.For a complete listing of FREE OPEN AREAS and WEIR PERIMETERS of all NEENAH grates, refer to pages 306-311.
10
302
11
AC
CE
SS
&H
AT
CH
CO
VE
RS
FO U N D RYN E E N A H
R-7516-DRectangular Ballast Screen
Can be double or triple stacked as needed.
R-7517 SeriesElectrical Junction Boxes
Light Duty
Solid box types for bridge and street lighting. Suitable for underground electrical work.
Standard boxes furnished with neoprene gaskets and stainless steel cap screws.
Cored or tapped holes for conduit not furnished as standard; available if specified atadditional cost - send details showing sizes and locations.
Units are shipped assembled.
Dimensions in inchesCatalog No. H L MR-7517-B 8 8 8R-7517-DA 4 1/2 10 6R-7517-DB 10 12 12R-7517-DC 10 12 18R-7517-DE 17 1/8 14 3/4 14 3/4
F Note: When specifying/ordering grates, refer to “Choosing the proper inlet grate” on pages 117-118.For a complete listing of FREE OPEN AREAS and WEIR PERIMETERS of all NEENAH grates, refer to pages 306-311.