Upload
jonson-cao
View
231
Download
0
Embed Size (px)
Citation preview
7/28/2019 Extruder 20
http://slidepdf.com/reader/full/extruder-20 1/2
Low Pressure ScreenExtrusion on the Bench TopDesigned for flexibility in R&D and ease
of scale-up to cost-effective production.Designed for product development on the bench-top
with different extrusion hole sizes available, reduced
height screens available for smaller batches.
Adaptable to work with small batch sizes from a few tens
of grams up to batch sizes of several kilos. Upgrades and
additional options available as needed.
Automatic data collection of operation parameters
including product temperature is available.
Interchangeable extrusion screens between laboratory
and production models minimise issues with scale up
from laboratory to production.
The extruded product falls directly into the collection
vessel avoiding the need for additional work on the
product before transfer for the next processing step.
Easily disassembled for cleaning and maintenance. Fully
safety interlocked for your protection.
Batches from a few grams to several kilos.Call +44 (0) 1258 52 00 34 or visit
www.caleva.co.uk today!
Caleva Process Solutions
Butts Pond Industrial Estate,
Sturminster Newton, Dorset, DT10 1AZ
Tel: +44 (0) 1258 52 00 34
Fax: +44 (0) 1258 47 11 33
Email: [email protected] www.caleva.com
7/28/2019 Extruder 20
http://slidepdf.com/reader/full/extruder-20 2/2
Caleva offers different types and models of extruder for
development work. The low pressure, screen Extruder 20 isideal for development of pharmaceutical spheroids.
The Caleva Extruder 20 uses a limited amount of bench-top space whilst
being a powerful work horse for product development.
CALEVA SCREEN EXTRUDER 20:-Good choice to begin R&D
Extrudate suitable for spheronization
Efficient use of R&D resources saving time and
money
Interchangeable screens between R&D and
production
Cost effective scale up
Easy cleaning and maintenance
CAPACITY AND BATCH SIZES Approximately up to rates equivalent to 10 kg per hour*
Small quantities from about 20 g*
(* = product and configuration dependant)
REDUCED HEIGHT SCREENS AVAILABLE Extrude small quantities effectively
Reduce capital cost and recurring product expenses
Have greater flexibility in your trial work.
DATA COLLECTION Collect and observe operational parameters
automatically as you work
Power usage
RPM
Product temperature
CONFIGURATION All product contact components are
manufactured in 316 stainless steel.
Operating parameters are manual and directly
controlled by the user.
Full documentation packages are available.
COMPANION EQUIPMENT
Caleva Multi Bowl Spheronizer (MBS) with a
250 mm bowl unit Batch size from
(approximately) 100 g to
1 kg For the bench-top
Spheronizer MBS with a 120 mm bowl unit Convenient batch size for
laboratory use 120 mm bowl unit complete
with safety guards etc.
Batch size (approximately)
10 g to 150 g (from 1g with
insert)
For the bench-top
Laboratory forced air pellet drying system Trays with approximately 7000 cm sq. of tray space
Adjustable Thermostat 30º
–
to 60º C Built-in on/off switch
26-hour Adjustable Timer
Caleva Process Solutions
Butts Pond Industrial Estate,
Sturminster Newton, Dorset, DT10 1AZ
Tel: +44 (0) 1258 52 00 34
Fax: +44 (0) 1258 47 11 33
Email: [email protected] www.caleva.com
Caleva Process Solutions is a British company that designs,
manufactures and supplies equipment for development
and production for the pharmaceutical and alliedindustries.