8/6/2019 Extinguisher 111

1/2

DEAD EASY.No wiring.

No piping.

No connections.

No-brainer...

Automatic fire protectionfor everyday applications...

Where fast burning, high heat-producing

materials are stored or used;

Where electricity is inaccessible or unreliable;

Where other systems would be too costly;

Where a first line of defence is needed to

prevent damage from a sprinkler system.

inControl Brand Automatic Clean Agent Extinguishers

24/7 unattended fire protection

ULC listed

Accepted by the Canadian Coast Guard

Approved for use in occupied areas

Suitable for Class A, B, & C hazards

Simple installation and maintenance

No residue safe for sensitive equipment

Self-contained no external power necessary

Optional manual operation

Mobile Spaces...CommercialBoats

Pleasure BoatsRecreational

Vehicles

Locomotives

Tractor Trailers

Mobile Equipment

Physical Plant...Diesel GeneratorEnclosures

Furnace Rooms

Pump Stations

Janitor Closets

Difficult-to-Service Areas...

TemporaryBuildings

Isolated Facilities

MoveableEnclosures

Storage Areas...Chemicals

Paints

FlammableLiquids

Fuel

Paper Files

Electronic Data

SpecialApplications...

Computer Room

Dry CleaningPlants

Spray Booths

TransformerVaults

24/7unattendedfireprotection!

Contact your inControl Authorized Dealer for product specifications, installation details and application information.

8/6/2019 Extinguisher 111

2/2

4" (102 mm) minimum distance12" (305 mm) maximum distance

Vertical Mountingon Wall

CylinderStraps

Horizontal Mounting on Ceiling

Sprinkler at left hand endPressure guage facing floor

Corner Mountingon Wall

Easy installation...

Maximum Volume Protected at 70 F (21 C)

ModelClass A Hazards Class B Hazards

ft m ft m

NAE-1 119.0 3.37 78.7 2.23

NAE-2 195.0 5.50 128.2 3.63

NAE-4 390.0 11.00 256.4 7.26

NAE-9 878.0 24.85 578.0 16.37

NAE-12 1,170.0 33.00 771.0 21.83

NAE-16 1,560.0 44.00 1,027.6 29.10

For illustrative purposes only. Consult the product literature for detailed ap-

plication information.

Not to be used for installation purposes. Consult the instruction manual for details

concerning specific hazards and conditions.

14"(356 mm)

4"(108 mm)

NAE-1

NAE-2

19"(483 mm)

5 "(130 mm)

18/

NAE-4

7 /1

8 "(181 mm)

21"(546 mm)

NAE-9

175 8/ "(448 mm)

123 8/ "(314 mm)

NAE-12

NAE-16

Simple selection...

Use only one cylinder assembly for a single protected area. For large spaces, enquireabout an engineered system.

Ensure the discharge nozzle rating is suitable for the space being protected. (The highesttemperature expected in the space plus approximately 50 F (28 C).

Locate the unit high on a wall, with the discharge nozzle 4 to 12 inches (102 to 305 mm) fromthe ceiling. Installation in the corner of the room keeps the extinguisher out of the way.

Install the extinguisher so that the pressure gauge is easily seen for maintenance.

Do not install cylinder close to any high-heat source such as space heaters.

Ensure there is nothing in front of the discharge nozzle that would interfere with agentdischarge and disbursement.

For small units. An arrow on the cylinder indicates possible vertical and horizontal ori-entations. Loosely mount cylinder mounting straps onto a solid structural member, slidecylinder in between the straps, then tighten the mounting bolts.

Large units must be mount-ed vertically. Bolt the bracketonto a solid structural mem-

ber, then install cylinder tothe bracket.

The nozzle must dischargehorizontally, and preferablytowards the main hazardin the space or towards thecentre of the space beingprotected.

Never install an extinguisherupside down.

On-boardpressure gaugefor addedconfidence.

Integrated heat detectorreacts instantly to fireconditions.

Accessory connectionsfor pressure switch,discharge indicator, ormanual operation.

NAF-SIII clean agentprovides powerful,effective fireprotection.

Worry-free

maintenance...

GO FIGURE.