EXTERNAL – POODLE CLIP · EXTERNAL – POODLE CLIP The PO-clip features wide “ears” (resembling those of a poodle dog, thus the name) which offer extra retention surface against

HUYETT.COM • 785-392-3017

Prices, materials, dimensions, tolerances, designs, and grades subject to change without notice. © 2017 G.L. Huyett

150

Description

For detailed specifications and tolerances, visi t Huyett.com.

How to Identify

EXTERNAL – POODLE CLIP

The PO-clip features wide “ears” (resembling those of a poodle dog, thus the name) which offer extra retention surface against the retained part. PO-clips are also available in thinner sizes as a standard series of rings known as POL.

PO-015 & POL-015 only

Additional attribute data on adjacent page.

Item#

ShaftDiameter

Groove Size Ring Size & Weight Item#

Clearance Thrust Load1

Square Corner AbutmentOutside

DiameterLarge

SectionAllowable Corner Radii & Chamfers

Max.Load

w/R Max.or Ch Max.

EdgeMargin

RPM LimitsStandard Material

Use with Applicator

Diameter Width Depth Free Diameter

Thickness2 Weight per1,000 Pieces

Installed in Groove

Ring SafetyFactor of

2-1/2

Groove Safety Factor of 2

Ds Dg Tol. F.I.M.** W Tol. d Ref.

Df Tol. T Tol. lbs. L2 Prlbs.

Pglbs.

G Ref.

S R Max.

Ch Max.

P'rlbs.

Y

PO-015 .156" (5/32) .120" ±.004" .002" .039" +.006" .018" .110" ±.003" .035" ±.002" .42 PO-015 .39" 457 110 .320" .042" .050" .040" 250 .036" 80,000 RRA-815

PO-018 .188" (3/16) .148" ±.005" .002" .039" +.006" .020" .140" ±.003" .035" ±.002" .63 PO-018 .42" 609 130 .400" .048" .050" .040" 270 .040" 80,000 RRA-818

PO-025 .250" (1/4) .210" ±.006" .003" .039" +.006" .020" .188" ±.003" .035" ±.002" .84 PO-025 .52" 914 200 .482" .058" .050" .040" 310 .040" 65,000 RRA-825

PO-031 .312" (5/16) .272" ±.006" .003" .046" +.006" .020" .250" ±.003" .042" ±.002" 1.46 PO-031 .63" 1,320 250 .588" .074" .065" .050" 400 .040" 65,000 RRA-831

PO-037 .375" (3/8) .331" ±.006" .003" .046" +.006" .022" .312" ±.004" .042" ±.002" 1.92 PO-037 .72" 1,573 300 .680" .081" .065" .050" 430 .044" 65,000 RRA-837

PO-043 .438" (7/16) .390" ±.008" .003" .056" +.006" .024" .375" ±.004" .050" ±.002" 2.66 PO-043 .79" 2,233 400 .752" .081" .080" .060" 600 .048" 60,000 RRA-843

PO-050 .500" (1/2) .440" ±.008" .004" .056" +.006" .030" .406" ±.004" .050" ±.002" 3.30 PO-050 .89" 2,538 600 .826" .097" .080" .060" 630 .060" 50,000 RRA-850

PO-062 .625" (5/8) .531" ±.008" .004" .056" +.006" .047" .500" ±.005" .050" ±.002" 4.65 PO-062 1.03" 3,045 1,100 .966" .086" .080" .060" 720 .094" 45,000 RRA-862

PO-075 .750" (3/4) .632" ±.010" .004" .068" +.008" .059" .594" ±.005" .062" ±.003" 6.35 PO-075 1.17" 4,669 1,600 1.095" .095" .085" .065" 1,000 .118" 38,000 RRA-875

PO-100 1.000" (1) .860" ±.010" .004" .086" +.008" .070" .812" ±.006" .078" ±.003" 12.65 PO-100 1.51" 7,613 2,600 1.415" .113" .090" .065" 1,800 .140" 25,000 RRA-810

PO-125 1.250" (1-1/4) 1.090" ±.010" .006" .103" +.008" .080" 1.032" ±.006" .093" ±.003" 25.20 PO-125 1.90" 11,165 3,500 1.800" .180" .090" .065" 2,750 .160" 11,000 –

PO-150 1.500" (1-1/2) 1.317" ±.015" .008" .120" +.010" .091" 1.250" ±.008" .109" ±.003" 36.3 PO-150 2.18" 15,530 4,800 2.050" .208" .100" .070" 3,800 .182" 9,000 –

PO-175 1.750" (1-3/4) 1.480" ±.015" .010" .139" +.010" .135" 1.406" ±.010" .125" ±.004" 53.0 PO-175 2.45" 20,808 8,200 2.300" .235" .120" .090" 5,100 .270" 7,000 –

PO-200 2.000" (2) 1.730" ±.015" .012" .139" +.010" .135" 1.625" ±.015" .125" ±.004" 69.2 PO-200 2.83" 23,853 9,450 2.650" .250" .130" .100" 5,100 .270" 5,000 –

W

DsDg

dT

S

DfG

PO

TO ORDER DIFFERENT MATERIAL/FINISHES,APPEND SUFFIX WITH YOUR CHOICE:

"NONE" • -BC • -SS • -ZD • -Z3

L2

Dg

.320

.185G2=.160

S

S

1. Verify poodle shape design and appearance.2. Measure the shaft diameter (Ds).3. Measure the clip outside diameter (G).4. Measure the clip thickness (T).5. Find the part in the chart.

Alternate Design

Clearance Diameter Installed In GrooveRing Dimensions Groove Dimensions

W

DsDg

dT

S

DfG

PO-clip features large shoulder abutments for effective retention of the shaft.

Applications


[email protected]

151For detailed specifications and tolerances, visi t Huyett.com.

Suffix Material/Finish

Larger sizes may be available upon request.

** F.I.M. (Full Indicator Movement) – Maximum allowable deviation of runout between groove and shaft.

1 Based on housings/shafts made of cold rolled steel. For more information on thrust load and safety factor see pages 14 & 15.

2 For plated rings add .002" to the listed maximum thickness. Maximum thickness will be a minimum of .0002" less than the listed groove width (W) minimum.

Item#

ShaftDiameter




DiameterLarge


Max.Load

w/R Max.or Ch Max.

EdgeMargin


Use with Applicator



Installed in Groove


2-1/2




Pglbs.

G Ref.

S R Max.

Ch Max.

P'rlbs.

Y

PO-015 .156" (5/32) .120" ±.004" .002" .039" +.006" .018" .110" ±.003" .035" ±.002" .42 PO-015 .39" 457 110 .320" .042" .050" .040" 250 .036" 80,000 RRA-815

PO-018 .188" (3/16) .148" ±.005" .002" .039" +.006" .020" .140" ±.003" .035" ±.002" .63 PO-018 .42" 609 130 .400" .048" .050" .040" 270 .040" 80,000 RRA-818

PO-025 .250" (1/4) .210" ±.006" .003" .039" +.006" .020" .188" ±.003" .035" ±.002" .84 PO-025 .52" 914 200 .482" .058" .050" .040" 310 .040" 65,000 RRA-825

PO-031 .312" (5/16) .272" ±.006" .003" .046" +.006" .020" .250" ±.003" .042" ±.002" 1.46 PO-031 .63" 1,320 250 .588" .074" .065" .050" 400 .040" 65,000 RRA-831

PO-037 .375" (3/8) .331" ±.006" .003" .046" +.006" .022" .312" ±.004" .042" ±.002" 1.92 PO-037 .72" 1,573 300 .680" .081" .065" .050" 430 .044" 65,000 RRA-837

PO-043 .438" (7/16) .390" ±.008" .003" .056" +.006" .024" .375" ±.004" .050" ±.002" 2.66 PO-043 .79" 2,233 400 .752" .081" .080" .060" 600 .048" 60,000 RRA-843

PO-050 .500" (1/2) .440" ±.008" .004" .056" +.006" .030" .406" ±.004" .050" ±.002" 3.30 PO-050 .89" 2,538 600 .826" .097" .080" .060" 630 .060" 50,000 RRA-850

PO-062 .625" (5/8) .531" ±.008" .004" .056" +.006" .047" .500" ±.005" .050" ±.002" 4.65 PO-062 1.03" 3,045 1,100 .966" .086" .080" .060" 720 .094" 45,000 RRA-862

PO-075 .750" (3/4) .632" ±.010" .004" .068" +.008" .059" .594" ±.005" .062" ±.003" 6.35 PO-075 1.17" 4,669 1,600 1.095" .095" .085" .065" 1,000 .118" 38,000 RRA-875

PO-100 1.000" (1) .860" ±.010" .004" .086" +.008" .070" .812" ±.006" .078" ±.003" 12.65 PO-100 1.51" 7,613 2,600 1.415" .113" .090" .065" 1,800 .140" 25,000 RRA-810

PO-125 1.250" (1-1/4) 1.090" ±.010" .006" .103" +.008" .080" 1.032" ±.006" .093" ±.003" 25.20 PO-125 1.90" 11,165 3,500 1.800" .180" .090" .065" 2,750 .160" 11,000 –

PO-150 1.500" (1-1/2) 1.317" ±.015" .008" .120" +.010" .091" 1.250" ±.008" .109" ±.003" 36.3 PO-150 2.18" 15,530 4,800 2.050" .208" .100" .070" 3,800 .182" 9,000 –

PO-175 1.750" (1-3/4) 1.480" ±.015" .010" .139" +.010" .135" 1.406" ±.010" .125" ±.004" 53.0 PO-175 2.45" 20,808 8,200 2.300" .235" .120" .090" 5,100 .270" 7,000 –

PO-200 2.000" (2) 1.730" ±.015" .012" .139" +.010" .135" 1.625" ±.015" .125" ±.004" 69.2 PO-200 2.83" 23,853 9,450 2.650" .250" .130" .100" 5,100 .270" 5,000 –


Hardness Ranges: PO-ClipsMaterial Size Range Scale Rockwell Hardness

(blank)Carbon Steel,(SAE 1060-1090)

All C 47 – 53

-SSStainless Steel,(PH 15-7 Mo)

All C 44 – 51

-BC Beryllium Copper15 – 2531+

30NC

54 – 6234 – 43

Edge Margin (Y)Maximum Bottom Radii (Br), .005 for ring sizes PO-015 – PO-050; .010 for ring sizes PO-062 – PO-100 .015 for ring sizes PO-125 – PO-150;.020 for ring sizes PO-175 – PO-200

Optional Center Prong Design

Optional Center Prong Design PO-125 – PO-200


PO### = CARBON SPRING STEEL, PHOSPHATE###-BC = BERYLLIUM COPPER, PLAIN ###-SS = PH 15-7 MO STAINLESS STEEL, PLAIN###-ZD = CARBON SPRING STEEL, ZINC YELLOW###-Z3 = CARBON SPRING STEEL, ZINC TRIVALENTMaterial/finish combinations may not be available in all sizes. More finishes available, see page 22 for a complete listing.

Note: This group contains alternate thickness values (column “T”). Other parameters such as width of groove (“W”) and thrust load “Pr” also differ from standard versions. Please take this into consideration when selecting a PO clip for your design.

.320

.185G2=.160

S

S

.320

.185G2=.160

S

S

(Manufacturer’s Option)

Alternate Designs

Maximum Corner Radius (R Max) & Chamfer (Ch Max)

for Retained Part

Br

Y

R Max

Ch Max

Br

Y

R Max

Ch Max

Br

Y

R Max

Ch Max

HUYETT.COM • 785-392-3017


152

Description

For detailed specifications and tolerances, visi t Huyett.com.

How to Identify



Item#

ShaftDiameter




DiameterLarge


Max.Load

w/R Max.or Ch Max.

EdgeMargin


Use with Applicator



Installed in Groove


2-1/2




Pglbs.

G Ref.

S R Max.

Ch Max.

P'rlbs.

Y

POL-015 .156" (5/32) .120" ±.004" .002" .029" +.006" .018" .110" ±.003" .025" ±.002" .30 POL-015 .39" 325 110 .320” .042" .050" .040" 130 .036" 80,000 RRA-915

POL-018 .188" (3/16) .148" ±.005" .002" .029" +.006" .020" .140" ±.003" .025" ±.002" .45 POL-018 .42" 436 130 .400" .048" .050" .040" 140 .040" 80,000 RRA-918

POL-025 .250" (1/4) .210" ±.006" .003" .029" +.006" .020" .188" ±.003" .025" ±.002" .60 POL-025 .52" 650 200 .482" .058" .050" .040" 150 .040" 65,000 RRA-925

POL-031 .312" (5/16) .272" ±.006" .003" .029" +.006" .020" .250" ±.003" .025" ±.002" .87 POL-031 .63" 792 250 .588" .074" .050" .040" 150 .040" 65,000 RRA-931

POL-037 .375" (3/8) .331" ±.006" .003" .039" +.006" .022" .312" ±.004" .035" ±.002" 1.60 POL-037 .72" 1,320 300 .680" .081" .065" .050" 200 .044" 65,000 RRA-937

POL-043 .438" (7/16) .390" ±.008" .003" .039" +.006" .024" .375" ±.004" .035" ±.002" 1.86 POL-043 .79" 1,878 400 .752" .081" .065" .050" 300 .048" 60,000 RRA-943

POL-050 .500" (1/2) .440" ±.008" .004" .046" +.006" .030" .406" ±.004" .042" ±.002" 2.77 POL-050 .89" 2,132 600 .826" .097" .080" .060" 450 .060" 50,000 RRA-950

POL-062 .625" (5/8) .531" ±.008" .004" .046" +.006" .047" .500" ±.005" .042" ±.002" 3.65 POL-062 1.03" 2,538 1,100 .966" .086" .080" .060" 500 .094" 45,000 RRA-962

POL-075 .750" (3/4) .632" ±.010" .004" .056" +.008" .059" .594" ±.005" .050" ±.002" 5.35 POL-075 1.17" 3,756 1,600 1.095" .095" .090" .070" 650 .118" 38,000 RRA-975

POL-100 1.000" (1) .860" ±.010" .004" .056" +.008" .070" .812" ±.006" .050" ±.002" 8.60 POL-100 1.51" 4,872 2,600 1.415" .113" .090" .070" 740 .140" 25,000 RRA-910

POL

TO ORDER DIFFERENT MATERIAL/FINISHES,APPEND SUFFIX WITH YOUR CHOICE:

"NONE" • -BC • -SS • -ZD • -Z3

1. Verify poodle shape design and appearance.2. Measure the shaft diameter (Ds).3. Measure the clip outside diameter (G).4. Measure the clip thickness (T).5. Find the part in the chart.

PO/POL clips can be assembled with a variety of tools. Anything from pliers to applicators. For more information on applicators, see page 254.

PO/POL clips can be installed easily with a pair of pliers...

and removed with a screwdriver, making PO/POL clips reusable after disassembly.

Installation Removal Tools

Applications

W

DsDg

dT

S

DfG

L2

Dg

Clearance Diameter Installed In GrooveRing Dimensions Groove Dimensions

W

DsDg

dT

S

DfG

The POL-clip features wide “ears” (resembling those of a poodle dog, thus the name) which offer extra retention surface against the retained part. POL-clips are also available in thicker sizes known as the PO series of rings.


[email protected]

153For detailed specifications and tolerances, visi t Huyett.com.

Suffix Material/Finish

Larger sizes may be available upon request.

** F.I.M. (Full Indicator Movement) – Maximum allowable deviation of runout between groove and shaft.

1 Based on housings/shafts made of cold rolled steel. For more information on thrust load and safety factor see pages 14 & 15.

2 For plated rings add .002" to the listed maximum thickness. Maximum thickness will be a minimum of .0002" less than the listed groove width (W) minimum.

Item#

ShaftDiameter




DiameterLarge


Max.Load

w/R Max.or Ch Max.

EdgeMargin


Use with Applicator



Installed in Groove


2-1/2




Pglbs.

G Ref.

S R Max.

Ch Max.

P'rlbs.

Y

POL-015 .156" (5/32) .120" ±.004" .002" .029" +.006" .018" .110" ±.003" .025" ±.002" .30 POL-015 .39" 325 110 .320” .042" .050" .040" 130 .036" 80,000 RRA-915

POL-018 .188" (3/16) .148" ±.005" .002" .029" +.006" .020" .140" ±.003" .025" ±.002" .45 POL-018 .42" 436 130 .400" .048" .050" .040" 140 .040" 80,000 RRA-918

POL-025 .250" (1/4) .210" ±.006" .003" .029" +.006" .020" .188" ±.003" .025" ±.002" .60 POL-025 .52" 650 200 .482" .058" .050" .040" 150 .040" 65,000 RRA-925

POL-031 .312" (5/16) .272" ±.006" .003" .029" +.006" .020" .250" ±.003" .025" ±.002" .87 POL-031 .63" 792 250 .588" .074" .050" .040" 150 .040" 65,000 RRA-931

POL-037 .375" (3/8) .331" ±.006" .003" .039" +.006" .022" .312" ±.004" .035" ±.002" 1.60 POL-037 .72" 1,320 300 .680" .081" .065" .050" 200 .044" 65,000 RRA-937

POL-043 .438" (7/16) .390" ±.008" .003" .039" +.006" .024" .375" ±.004" .035" ±.002" 1.86 POL-043 .79" 1,878 400 .752" .081" .065" .050" 300 .048" 60,000 RRA-943

POL-050 .500" (1/2) .440" ±.008" .004" .046" +.006" .030" .406" ±.004" .042" ±.002" 2.77 POL-050 .89" 2,132 600 .826" .097" .080" .060" 450 .060" 50,000 RRA-950

POL-062 .625" (5/8) .531" ±.008" .004" .046" +.006" .047" .500" ±.005" .042" ±.002" 3.65 POL-062 1.03" 2,538 1,100 .966" .086" .080" .060" 500 .094" 45,000 RRA-962

POL-075 .750" (3/4) .632" ±.010" .004" .056" +.008" .059" .594" ±.005" .050" ±.002" 5.35 POL-075 1.17" 3,756 1,600 1.095" .095" .090" .070" 650 .118" 38,000 RRA-975

POL-100 1.000" (1) .860" ±.010" .004" .056" +.008" .070" .812" ±.006" .050" ±.002" 8.60 POL-100 1.51" 4,872 2,600 1.415" .113" .090" .070" 740 .140" 25,000 RRA-910


Hardness Ranges: POL-clipsMaterial Size Range Scale Rockwell Hardness

(blank)Carbon Steel,(SAE 1060-1090)

15 – 3137+

30NC

65.5 – 7147 – 53

-SSStainless Steel,(PH 15-7 Mo)

15 – 3137+

30NC

63 – 69.544 – 51

-BC Beryllium Copper15 – 4350+

30NC

54 – 6234 – 43


POL

### = CARBON SPRING STEEL, PHOSPHATE###-BC = BERYLLIUM COPPER, PLAIN ###-SS = PH 15-7 MO STAINLESS STEEL, PLAIN###-ZD = CARBON SPRING STEEL, ZINC YELLOW###-Z3 = CARBON SPRING STEEL, ZINC TRIVALENTMaterial/finish combinations may not be available in all sizes. More finishes available, see page 22 for a complete listing.

Edge Margin (Y)Maximum Bottom Radii (Br), .005 for ring sizes POL-015 – POL-050; .010 for ring sizes POL-062 – POL-100 .015 for ring sizes POL-125 – POL-150;.020 for ring sizes POL-175 – POL-200

Optional Center Prong Design

Optional Center Prong Design POL-125 – POL-200

.320

.185G2=.160

S

S

.320

.185G2=.160

S

S

(Manufacturer’s Option)

Alternate Designs

Maximum Corner Radius (R Max) & Chamfer (Ch Max)

for Retained Part

Br

Y

R Max

Ch Max

Br

Y

R Max

Ch Max

Br

Y

R Max

Ch Max

STACKED OPTIONS AVAILABLE, SEE HUYETT.COM FOR MORE DETAILS

Visit huyett.com to download Material, Compliance, and RoHS/REACH Certifications* in your Account Order History.* Some exclusions apply

Documents

EXTERNAL – POODLE CLIP · EXTERNAL – POODLE CLIP The PO-clip features wide “ears” (resembling those of a poodle dog, thus the name) which offer extra retention surface against